992K Wheel Loader Engine Engine Model Cat C32 ACERT Emissions U.S. EPA Tier 4 Final Gross Power SAE J1995 671 kw 900 hp Net Power SAE J1349 607 kw 814 hp Gross Power ISO 14396 659 kw 884 hp Emissions Tier 2 Equivalent Gross Power SAE J1995 676 kw 907 hp Net Power SAE J1349 607 kw 814 hp Gross Power ISO 14396 659 kw 884 hp Buckets Bucket Capacities -12.3 m3 14-16 yd3 Operating Specifications Rated Payload Standard (face material) 21.7 tonnes 24 tons Rated Payload High Li (face material) 19.1 tonnes 21 tons Operating Weight Standard 99 831 220,089 Operating Weight High Li 100 628 221,847
Efficient and Reliable Contents Structures...4 Power Train...6 Hydraulics...8 Operator Station...10 Technology Solutions...12 Cat MineStar System...13 Safety...14 Serviceability...16 Customer Support...16 Sustainability...17 Bucket and Ground Engaging Tools...18 System Match Efficiency...20 Specifications...21 Standard Equipment...33 Optional Equipment...34 Mandatory Attachments...35 2
Caterpillar first introduced the 992 in 1968. This large wheel loader has been a global leader ever since, building a reputation as a face loader that s both safe to operate, productive and durable. With the introduction of the K Series, we ve enhanced the operator s experience and the safety of those working on and around the machine. With both standard and high li configurations, this machine will pass match with fleets of 775, 777, and 785 trucks. If your operations revolve around the 992 as a loading tool, you ll find everything that s important to your business in the 992K; safety, productivity, cost control and comfort for your people. 3
Structures Designed for the toughest conditions. Li Arm Your key to maximum uptime and productivity is our field-proven li arm. Excellent visibility to the bucket edges and work area. Enhanced strength in key pin areas through the use of one piece castings. Stress relieved li arm increases durability. 4
Robust Structures Your bottom line is improved by highly durable structures that achieve multiple life cycles and withstand the toughest loading conditions. Full box-section rear frame resists torsional shock and twisting forces to maximize life of mounted components. Frames utilize castings in key areas to maximize frame durability and optimize efficiency. Rear axle mounting to frame optimized to better disperse loads for increased structural integrity. Front Linkage To ensure long life and reliability, sleeve bearing pins in the linkage are more predictable in their wear and limit daily greasing. 5
Power Train Move material more efficiently with improved power and control. Impeller Clutch Torque Converter (ICTC) and Rimpull Control System (RCS) Lower your cost per ton utilizing advanced ICTC and RCS for modulated rimpull. Reduce tire slippage and wear by modulating rimpull from 100 to 25 percent while depressing le pedal. Aer 25 percent rimpull is achieved the le pedal applies the brake. Reduce the potential for wheel slippage without reducing hydraulic efficiency with RCS. Improve fuel efficiency in certain applications with lock-up clutch torque converter providing direct drive. Economy Mode Enabling maximum productivity and efficiency, all day every day. The 992K systems work hard to save you fuel through advanced technologies. Utilizing On Demand Throttle, operators maintain normal operation with the le pedal and implements while the 992K manages the engine speed. Provides similar control and feel to our traditional throttle lock feature. Efficiency of manual throttle and the ergonomics of throttle lock. 6
Steering and Transmission Integrated Control System (STIC ) Experience maximum responsiveness and control with STIC that combines directional selection, gear selection and steering into a single lever. Simple side-to-side motion turns machine right or le, minimizing operator movements. Easy to operate finger controlled gear selection. Smoother, faster cycles and less operator fatigue through the use of low effort integrated controls. Cat Planetary Powershi Transmission Building your success begins with a best-in-class transmission designed specifically for your application. Consistent, smooth shiing and efficiency through integrated electronic controls. Long life and reliability through heat treated gears and metallurgy. Three forward and three reverse speeds to match your application. Cat C32 ACERT Engine The 992K retains the durability and reliability of the proven Cat C32 diesel with ACERT Technology. Like all Cat machines, this engine has been completely integrated into all machine systems resulting in power curves, fuel maps and ratings that are unique to this machine and applications. The solid foundation of this engine starts from our legendary foundries delivering the highest quality engine block. The mechanically actuated, electronically controlled unit injection (MEUI ) ensures that fuel is metered out in optimal quantities for both power and efficiency. 7
Hydraulics Productivity enabling you to move more and make more. Positive Flow Control Hydraulics Increase efficiency through our Positive Flow Control (PFC) Hydraulic System. PFC has concurrent pump and valve control. By optimizing pump control, hydraulic oil flow is proportionate to implement lever movement. Fast, productive cycles enabled by four electronically controlled, fully variable piston pumps. Increased bucket feel and control. Consistent performance and efficiency with lower system heat. 8
Electro Hydraulic Controls Increase operator productivity with these implement features. Operate comfortably through electronically controlled hydraulic cylinder stops. Handle easy-to-use so detent controls. Conveniently set automatic implement kickouts from inside the cab. Steering System Confident loader operation starts with precise machine control enabled by the 992K s load sensing hydraulic steering system. Efficient variable displacement piston pumps. Achieve precise positioning for easy loading in tight areas. Enhance operator comfort with integrated steering and transmission control functions. Filtration System Benefit from extended performance and reliability of your hydraulic system with our advanced filtration system. Li/tilt case drain filters. Li/tilt high pressure screens. Steering case drain filters. Steering high pressure screens. Hydraulic case drain filters. Power train filters for transmission, torque converter, and pump drives. Front and rear brake oil screens. Cooling System A standard demand fan to improve efficiency and cooling performance. Optional high ambient package for hot climate conditions. 9
Operator Station Best-in-Class operator comfort and ergonomics. Environment Your operator s productivity is enhanced with our clean, comfortable cab environment. Experience reduced vibrations from viscous cab mounts and air seat suspension. Maintain desired cab temperature with automatic temperature controls. Pressurized cab with pressure indicator. Low operator sound levels. Available heated and ventilated seats featuring leather covered seat bolster and headrest. 10
Your operators can work more efficiently and stay comfortable with our customer-inspired cab features. Deluxe Operator Seat Enhance comfort and reduce operator fatigue. Available heated and ventilated seat featuring leather seat bolster surfaces. High back design and extra thick, contoured cushions. Air suspension system. Easy-to-reach seat levers and controls for six way adjustments. Seat-mounted implement pod and STIC steer that moves with the seat. 76 (3 in) wide retractable seat belt. Fold up STIC steer/armrest. Trainer Seat Train other operators in comfort with our standard training seat. 76 (3 in) wide, retractable seat belt. Fold-down design with molded drink tray and storage. 11
Technology Solutions Greater productivity through integrated electronic systems. Integrated electronics provide flexible levels of information to both the site and the operator. This integration creates a smart machine and more informed operator, maximizing the productivity of both. Information Display We have worked hard to help our customers and operators perform at their best through our newly upgraded touch screen information display. Intuitive operation and easy navigation with our enhanced user interface. Decrease service time by keeping operators informed about machine systems. Quick on-the-go weighing with the Cat Production Measurement (CPM). Cat Product Link Take the guesswork out of asset management with Product Link remote monitoring. Remote access to information through the easy-to-use VisionLink interface. Maximize uptime by staying informed on machine systems and diagnostic codes. Track machine with utilization, fuel usage, and payload suaries. Stay up to date on machine location, service meter hours, and reporting status. Vital Information Management System (VIMS ) Connect directly to the machine for access to a wide range of sensor information and enhanced machine data. Create productivity reports with payload and work cycle segmentation. Identify operator training needs through productivity data. Detailed data logging of machine parameters and diagnostic codes. Track machine sensor information with trend analysis and histograms to monitor machine health. 12
Cat MineStar System Work more productively. Cat MineStar System is the industry s broadest suite of integrated mine operations and mobile equipment management technologies, configurable to suite your operation s needs. Its capability sets Fleet, Terrain, Detect, Health and Coand contain a range of technologies that let you manage everything from fleet assignment and condition monitoring to remote and autonomous control. The 992K can take advantage of many of these advanced technologies, some of which are standard out of the factory. Fleet Fleet provides comprehensive, real-time machine tracking, assignment and productivity management, giving you a comprehensive overview of all operations from anywhere in the world. Terrain for Loading Terrain with your 992K enables high-precision management of loading operations through the use of guidance technology. It increases 992K s productivity and provides you real-time feedback for improved efficiency. Detect Detect helps increase operator awareness, enhancing safety at your operation. It includes a range of capabilities designed to assist the operator with areas of limited visibility around fixed and mobile equipment. Health Health delivers critical event-based machine condition and operating data for your entire fleet. It includes comprehensive equipment health and asset monitoring capabilities, with a wide range of diagnostic, analytic and reporting tools. 13
Safety Making your safety our priority. Powered Access System The Cat powered access system allows easier access to the primary stairs by improving access and egress to and from the rear platform. Safe, ergonomic access system. All operators have adequate space when using the wide stairway. Operators maintain three-point contact when using full handrails on each side. Raise and lower stairs from cab level or ground. 14
We are constantly improving our products in an effort to provide a safe work environment for the operator and those who work on your job site. Machine Access Wider stairs with 45 degree angles provide easy access for operators getting on and off the 992K. Wide walkways with non-skid surfaces and integrated lock out/tag out points are designed into the service areas. Windshield cleaning platforms provide safe and convenient access for the operator. Maintain three points of contact at all times through ground level or platform accessible service areas. Emergency egress ladder provides a third exit, if needed. Visibility Cat Detect, which includes Cat Vision plus an optional object detection radar system, enhances operator awareness around the machine. LED warning lights, prograable for site-specific signaling. A mirror system improves operator line of sight to the side and rear of the machine. Heated option also available. Pull down window shade. Operator Environment Viscous cab mounts and seat air suspension reduce vibrations from the machine to the operator. Low interior sound levels. Standard 76 (3 in) seat belt with minder. Optional 4 point harness with minder. Operator training seat with standard 76 (3 in) seat belt facilitates safe new operator training. Fire Suppression Ready System Provides required provisions to mount a fire suppression system. Allows the customer to install a fire suppression system quickly without compromising other components. 15
Serviceability Enabling high uptime by reducing your service time. We help you succeed by ensuring your 992K has design features to increase uptime. The standard, comprehensive filtration system maintains clean fluids to enable high component reliability. Safe and convenient service with ground level or platform access and grouped service points. Swing-out doors on both sides of the engine compartment provide easy access to important daily service checks. Ecology drains for ease of service and prevention of spills. Centralized remote pressure taps. Reduce downtime with VIMS system notifications so your operators and technicians can resolve any problems before failure. Powered fresh air filter extends cab filter life. Customer Support Your Cat dealers know how to keep your mining machines productive. Superior Cat Dealer Support A valued partner, your Cat dealer is available whenever you need them. Preventive maintenance programs and guaranteed maintenance contracts. Best-in-class parts availability. Improve your efficiency with operator training. Genuine Cat Remanufactured parts. 16
Sustainability Stewards of the environment. Protecting the Environment Environmental responsibility is designed and built into our 992K s features. Increased fuel efficiency to minimize your carbon footprint. Engine Idle Shutdown can help you save fuel by avoiding unnecessary idling. To assist with maximizing machine life, Caterpillar provides a number of sustainable options such as our Reman and Certified Rebuild programs. In these programs, reused or remanufactured components can deliver cost savings of 40 to 70 percent, which lowers operating cost while benefiting the environment. Caterpillar offers retrofit packages to bring new features to older machines, maximizing your resource. When you go through the Cat Certified Rebuild program, these retrofit kits are part of the rebuild process. Fluids are better controlled through use of Cat anti-drain filter housings and component ecology drains. 17
Buckets and Ground Engaging Tools It s all about performance. Increase Productivity and Fuel Efficiency Cat buckets are designed for superior performance in a variety of materials. They are engineered to dig into piles quickly and load efficiently. Optimized fill factors enable you to get the job done and move on to other tasks. Fast load cycles and fewer trips mean less wear and tear on your machine and keep you working. The buckets below are part of the 992K bucket line. They come in different capacities and widths to fit your loading and carrying needs. 1 Rock Buckets Designed for use in bank or face loading of limestone and other unprocessed rock. Application also includes truck and hopper loading for a wide range of quarry materials. GET includes spade nose cutting edge with adapters, half arrow segments, floor liner, bottom wear plates, wings, and side bar protectors. 2 Heavy Duty Rock Buckets Designed for use in applications like face loading tightly compacted pit materials or handling materials of moderate abrasion and high impacts. GET are similar to the rock bucket with the addition of half radius liners and bolt-on bottom edge wear plates. Base edge end protection, ski plates, additional side wear plates, and an extra set of side bar protectors are also included. Iron Ore Buckets Designed for use in extremely aggressive applications like face loading. Built for high abrasion and moderate impact. GET are similar to heavy duty rock buckets with the addition of flush mount adapter covers, edge segment top covers and side heel shrouds. Iron ore buckets are smaller in bucket capacity to accoodate for higher material density applications. 3 Coal Buckets Designed for use in applications with light density and non-abrasive materials. GET includes a straight base edge with a bolt-on cutting edge system. 1 2 3 18
Cat Advansys Ground Engaging Tools Protect expensive components. Reduce your operating costs. Get the most out of your machine s performance. Choose from a variety of performance-built Advansys GET like these to meet your application requirements. CapSure Sidebar Protector MAWPs on Side and Bottom Base End Edge Protector CapSure Tip Options Edge Protection Options Heavy Duty Tip Heavy Abrasion Tip CapSure Shrouds Half Arrow Segment *Please check out our Parts Catalog for more GET options. Coal Tip Heavy Penetration Tip CapSure Retention Technology Simplify GET component replacement with haerless CapSure retention for fast, easy and safe installation. CapSure tips, shrouds and sidebar protectors are easily locked and unlocked with a 180 degree turn of a 3 4 inch ratchet. 19
System Match Efficiency Efficient loading/hauling system starts with a perfect match. Cat Truck Pass Match 775 777 785 Standard Li 3 4 High Li 5 7 Application Match The standard 992K is sized to load the 68 tonnes (70 ton) 775 in three passes, and the 91 tonnes (100 ton) 777 in four passes. The 992K high light configuration loads the 777 in five passes, and the 145 tonnes (160 ton) 785 in seven passes. Efficient Combination For full truck payloads with minimum loading time, an efficient loading/hauling system starts with a perfect match. Cat wheel loaders are matched with Cat mining trucks to maximize volume of material moved at the lowest operating cost per ton. Bucket Selection Selection of the right bucket depends on penetration requirements, material densities, abrasion, and the loading target. Bucket sizes are matched to truck bed capacities and material densities for optimum loading efficiency and greater productivity. 20
992K Wheel Loader Specifications Engine Operating Specifications Engine Model Cat C32 ACERT Operating Weight 99 831 220,089 Emissions Tier 4 Final Rated Payload Rated Speed 1,750 rpm Standard (face material) 21.7 tonnes 24 tons Gross Power SAE J1995 671 kw 900 hp High Li (face material) 19.1 tonnes 21 tons Gross Power ISO 14396 659 kw 884 hp Bucket Capacity Range -12.3 m3 14-16 yd3 Net Power SAE J1995 607 kw 814 hp Peak Torque @ 1,200 rpm 4,765 rpm Transmission SAE J1995 Transmission Type Cat Planetary Power Shi Emissions Tier 2 Equivalent Forward 1 6.9 km/h 4.3 mph Rated Speed 1,750 rpm Forward 2 11.9 km/h 7.4 mph Gross Power SAE J1995 676 kw 907 hp Forward 3 20.3 km/h 12.6 mph Gross Power ISO 14396 659 kw 884 hp Direct Drive Forward 1 Disabled Net Power SAE J1995 607 kw 814 hp Direct Drive Forward 2 12.9 km/h 8.0 mph Peak Torque @ 1,200 rpm 4,796 rpm Direct Drive Forward 3 22.8 km/h 14.2 mph SAE J1995 Reverse 1 7.6 km/h 4.7 mph Bore 145 5.7 in Reverse 2 13.1 km/h 8.1 mph Stroke 162 6.4 in Reverse 3 22.2 km/h 13.8 mph Displacement 32.1 L 1963.5 in3 Direct Drive Reverse 1 7.9 km/h 4.9 mph Torque Rise 30% Direct Drive Reverse 2 14.2 km/h 8.8 mph Tier 4 Final Direct Drive Reverse 3 24.8 km/h 15.4 mph These ratings apply at 1,750 rpm when tested under the specified standard conditions. Rating for net power advertised is based on power available when Hydraulic System Li/Tilt the engine is equipped with alternator, air cleaner, muffler, and Li/Tilt System Circuit Positive Flow Control on-demand hydraulic fan drive at maximum fan speed. Li/Tilt System Pumps Variable Displacement Tier 2 Equivalent Piston These ratings apply at 1,750 rpm when tested under the specified Maximum Flow at 1,850 rpm 960 L/min 254 gal/min standard conditions. Rating for net power advertised is based on power available when Relief Valve Setting Li/Tilt 31 000 kpa 4,500 psi the engine is equipped with alternator, air cleaner, muffler, and Li Cylinder Bore 279.4 11 in on-demand hydraulic fan drive at maximum fan speed. Li Cylinder Stroke 1148 45.2 in Tilt Cylinder Bore 266.7 10.5 in Tilt Cylinder Stroke 2055 80.9 in 21
992K Wheel Loader Specifications Hydraulic Cycle Time Rack Back 4.4 seconds Raise 9.4 seconds Dump 1.8 seconds Lower Float Down 3.7 seconds Total Hydraulic Cycle Time 19.3 seconds Service Refill Capacities Fuel Tank 1562 L 413 gal Cooling Systems 290 L 77 gal Engine Crankcase 120 L 32 gal Transmission 169 L 45 gal Differentials and Final Drives Front 360 L 95 gal Differentials and Final Drives Rear 345 L 91 gal Hydraulic System Implement 326 L 86 gal Hydraulic System Steering 159 L 42 gal Air Conditioner Refrigerant 2.72 6.00 Air Conditioner Oil 0.268 L 0.071 gal Axles Front Fixed Rear Oscillating Oscillation Angle 10 ±, 8 ± with Stops Sound Performance The operator sound pressure level is 70 db(a), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. The machine sound power level is 116 db(a), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The machine sound power level is 113 db(a), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hydraulic System Steering Steering System Circuit Pilot, Load Sensing Steering System Pump Piston, Variable Displacement Maximum Flow @ 1,350 rpm 360 L/min 95 gal/min Steering Cut Off Pressure 31 000 kpa 4,500 psi Total Steering Angle 86 Steering Cycle Time (low idle) 6.4 seconds Steering Cycle Time (high idle) 4.4 seconds Brakes Brakes Meet ISO 3450:2011 22
992K Wheel Loader Specifications Dimensions All dimensions are approximate. 15 16 17 14 13 1 2 3 11 12 10 4 9 5 6 8 7 Standard Li High Li 1 Ground to Top of ROPS 5678 18'7" 5678 18'7" 2 Ground to Top of Exhaust Stacks 5248 17'2" 5248 17'2" 3 Ground to Top of Hood 4043 13'4" 4043 13'4" 4 Ground to Bumper Clearance 1176 3'11" 1176 3'11" 5 Rear Axle Center Line to Bumper 4195 13'8" 4195 13'8" 6 Wheel Base 5890 19'4" 5890 19'4" 7 Maximum Overall Length 15 736 52'0" 16 095 52'8" 8 Ground to Lower Hitch Clearance 682 2'2" 682 2'2" 9 Ground to Center of Axles 1352 4'4" 1352 4'4" 10 Clearance at 50 degrees (Standard) 4480 14'8" 4574 15'1" 45 degrees (High Li) Dump (tooth tip) 11 Rack Back Angle at Ground Level 43.4 degrees 42.8 degrees 12 Rack Back Angle at Carry 52.7 degrees 52.5 degrees 13 B-Pin Height at Maximum Li 6927 22'8" 7544 24'7" 14 Maximum Overall Height bucket raised 9313 30'6" 10 109 33'1" 15 Rack Back Angle at Maximum Li 65 degrees 65 degrees 16 Dump Angle at Maximum Li 50 degrees 50 degrees 17 Reach at Maximum Li 2118 6'11" 2092 6'9" Tread Width 3302 10'8" 3302 10'8" 23
992K Wheel Loader Specifications Bucket Capacity/Material Density: Face Bucket Capacity GET Standard Li Material Density High Li Material Density Bucket Type m3 yd3 No. of Tips /m3 /yd3 /m3 /yd3 Rock 8 2035 3,430 1780 3,000 8 1893 3,191 1657 2,792 8 1893 3,191 1657 2,792 12.2 16.0 8 1785 3,008 1562 2,632 Coal 19.1 25.0 BOCE 1100 1,850 950 1,600 Iron Ore 9.0 11.8 8 2419 4,078 2117 3,568 Custom buckets are available upon request. Please work with your dealer for more information. 24
992K Wheel Loader Specifications Operating Specifications Standard Li (Tier 4 Final) For machines equipped with 45/58-R45 L-5 58 ply tires (SLR: 1308 /4'3"). Bucket Type Ground Engaging Tools Cutting Edge Type Bucket Part No. (Group Level) Bucket Load at Rated Capacity Rated Capacity m 3 Struck Capacity ISO m 3 Heaped Capacity ISO m 3 Bucket Width Overall Clearance at 50 Dump (Edge) Clearance at 50 Dump (Tooth Tip) Reach at 50 Dump (Edge) Reach at 50 Dump (Tooth Tip) Clearance at 45 Dump (Edge) Clearance at 45 Dump (Tooth Tip) Reach at 45 Dump (Edge) Reach at 45 Dump (Tooth Tip) Bucket Pin at Maximum Li Horizontal Arm and Level Bucket Reach Digging Depth (Segment) in Overall Length Bucket Level Ground (Tooth) Overall Height Turning Radius Corner SAE Carry (Tooth) Clearance at 45 Dump and 2.13 m (7 ) Height (Tooth) Reach at 45 Dump and 2.13 m (7 ) Height (Tooth) Rack Back Angle at SAE Carry degree Full Dump at Maximum Li degree Rock Teeth & Segment Spade Coal Segment Straight 490-1840 484-6620 490-1860 490-1870 490-1850 490-1890 490-1880 294-9020 4824 15'10" 4742 15'7" 4480 14'8" 1906 6'3" 2118 6'11" 4849 15'11" 4607 15'1" 2092 6'10" 2326 7'8" 6927 22'9" 5114 16'9" 196 8" 15 736 51'8" 9313 30'7" 11 097 36'5" 3790 12'5" 52.7 50.0 9.5 12.4 4884 16'0" 4673 15'4" 4417 14'6" 1957 6'5" 2165 7'1" 4785 15'8" 4548 14'11" 2149 7'1" 2378 7'10" 6927 22'9" 5193 1 201 8" 15 818 51'11" 9313 30'7" 11 121 36'6" 3828 12'7" 12.3 16.0 10.2 13.3 12.3 16.0 4824 15'10" 4625 15'2" 4360 14'4" 1998 6'7" 2209 7'3" 4741 15'7" 4495 14'9" 2194 7'2" 2427 8'0" 6927 22'9" 5265 17'3" 201 8" 15 890 52'2" 9492 31'2" 11 131 36'6" 3863 12'8" 4884 16'0" 4742 15'7" 4486 14'9" 1906 6'3" 2114 6'11" 4849 15'11" 4612 15'2" 2092 6'10" 2322 7'7" 6927 22'9" 5108 16'9" 196 8" 15 729 51'7" 9313 30'7" 11 096 36'5" 3787 12'5" 9.5 12.4 4824 15'10" 4675 15'4" 4413 14'6" 1960 6'5" 2171 7'1" 4788 15'9" 4545 14'11" 2151 7'1" 2385 7'10" 6927 22'9" 5200 17'1" 198 8" 15 823 51'11" 9313 30'7" 11 122 36'6" 3834 12'7" 4900 16'1" 4832 15'10" 4574 15'0" 1858 6'1" 2092 6'10" 4935 16'2" 4699 15'5" 2036 6'8" 2292 7'6" 6927 22'9" 5025 16'6" 175 7" 15 632 51'3" 9392 30'10" 11 085 36'4" 3777 12'5" 4900 16'1" 4832 15'10" 4574 15'0" 1858 6'1" 2092 6'10" 4935 16'2" 4699 15'5" 2036 6'8" 2292 7'6" 6927 22'9" 5025 16'6" 175 7" 15 632 51'3" 9313 30'7" 11 085 36'4" 3777 12'5" 6090 20'0" 4772 15'8" 4772 15'8" 1925 6'4" 1925 6'4" 4881 16'0" 4881 16'0" 2109 6'11" 2109 6'11" 6927 22'9" 4767 15'8" 162 6" 15 366 50'5" 9489 31'2" 11 742 38'6" 3631 11'11" 52.8 52.8 52.7 52.7 52.5 52.5 52.4 50.0 50.0 50.0 50.0 50.0 50.0 50.0 (chart continued on next page) 25
992K Wheel Loader Specifications Operating Specifications Standard Li (Tier 4 Final) (continued) For machines equipped with 45/58-R45 L-5 58 ply tires (SLR: 1308 /4'3"). Bucket Type Ground Engaging Tools Cutting Edge Type Bucket Part No. (Group Level) Bucket Load at Rated Capacity Rated Capacity Struck Capacity ISO Heaped Capacity ISO Straight Articulated 43 Articulated 40 Articulated 35 Bucket Level Ground Tipping Load with Squash at Operating Weight Straight Tipping Load with Squash at Operating Weight Articulated 43 Tipping Load with Squash at Operating Weight Articulated 40 Tipping Load with Squash at Operating Weight Articulated 35 Tipping Load with Squash at Operating Weight Bucket Level Ground Li Capacity Bucket Level Ground Breakout Force SAE Rated Operating Weight Weight Distribution at SAE Carry Front Weight Distribution at SAE Carry Rear Loaded Machine Weight Weight Distribution at SAE Carry Front Weight Distribution at SAE Carry Rear Shipping Weight m 3 m 3 m 3 f f Rock Teeth & Segment Spade Coal Segment Straight 490-1840 484-6620 490-1860 490-1870 490-1850 490-1890 490-1880 294-9020 62 567 137,936 52 861 116,539 54 115 119,302 56 033 123,532 49 848 109,897 60 483 133,343 49 053 108,144 50 451 111,226 52 625 116,018 47 978 105,774 52 038 114,724 58 459 128,879 99 438 219,224 54 994 121,241 44 444 97,983 118 489 261,225 86 587 190,892 31 902 70,333 95 511 210,566 9.5 12.4 61 854 136,365 52 182 115,041 53 431 117,795 55 343 122,010 48 613 107,174 59 774 131,780 48 383 106,667 49 777 109,739 51 943 114,515 46 805 103,188 51 178 112,828 55 991 123,439 99 831 220,091 55 729 122,862 44 102 97,229 118 882 262,091 87 383 192,647 31 499 69,444 95 905 211,434 12.3 16.0 10.2 13.3 12.3 16.0 61 551 135,697 51 868 114,349 53 118 117,106 55 033 121,326 47 699 105,159 59 434 131,030 48 021 105,868 49 417 108,946 51 588 113,733 45 930 101,257 50 489 111,310 54 243 119,584 100 211 220,928 56 359 124,251 43 852 96,678 119 262 262,929 88 029 194,070 31 234 68,859 96 284 212,270 61 086 134,672 51 380 113,275 52 634 116,038 54 552 120,268 48 803 107,593 59 012 130,099 47 587 104,912 48 984 107,992 51 157 112,782 46 921 103,443 50 839 112,080 57 835 127,504 100 817 222,264 57 333 126,398 43 484 95,867 119 868 264,265 88 929 196,056 30 939 68,209 97 678 215,343 9.5 12.4 62 114 136,939 52 442 115,614 53 691 118,368 55 603 122,583 48 832 107,656 60 033 132,350 48 641 107,234 50 034 110,306 52 201 115,083 47 021 103,665 51 391 113,297 56 140 123,767 99 612 219,608 55 335 121,993 44 277 97,615 118 663 261,608 86 987 191,773 31 677 69,835 95 686 95,686 59 035 130,150 49 330 108,753 50 583 111,516 52 502 115,746 48 250 106,373 56 960 125,574 45 534 100,385 46 931 103,465 49 104 108,255 46 256 101,977 49 521 109,176 59 374 130,896 102 987 227,049 60 822 134,091 42 165 92,958 122 038 269,049 92 413 203,736 29 626 65,313 99 849 99,849 60 665 133,743 50 959 112,346 52 213 115,109 54 131 119,339 49 630 109,416 58 593 129,175 47 169 103,990 48 566 107,070 50 738 111,859 47 652 105,054 51 094 112,643 60 210 132,741 101 193 223,093 57 971 127,804 43 223 95,289 120 244 265,094 89 556 197,438 30 688 67,656 99 849 220,129 60 809 134,061 51 098 112,651 52 352 115,416 54 272 119,649 48 416 106,740 58 602 129,195 47 126 103,895 48 530 106,989 50 714 111,804 46 491 102,495 50 219 110,715 57 297 126,318 101 595 223,980 58 322 128,578 43 273 95,402 101 595 223,980 58 322 128,578 43 273 95,402 26
992K Wheel Loader Specifications Operating Specifications Standard Li (Tier 2 Equivalent) For machines equipped with 45/58-R45 L-5 58 ply tires (SLR: 1308 /4'3"). Bucket Type Ground Engaging Tools Cutting Edge Type Bucket Part No. (Group Level) Bucket Load at Rated Capacity Rated Capacity m 3 Struck Capacity ISO m 3 Heaped Capacity ISO m 3 Bucket Width Overall Clearance at 50 Dump (Edge) Clearance at 50 Dump (Tooth Tip) Reach at 50 Dump (Edge) Reach at 50 Dump (Tooth Tip) Clearance at 45 Dump (Edge) Clearance at 45 Dump (Tooth Tip) Reach at 45 Dump (Edge) Reach at 45 Dump (Tooth Tip) Bucket Pin at Maximum Li Horizontal Arm and Level Bucket Reach Digging Depth (Segment) in Overall Length Bucket Level Ground (Tooth) Overall Height Turning Radius Corner SAE Carry (Tooth) Clearance at 45 Dump and 2.13 m (7 ) Height (Tooth) Reach at 45 Dump and 2.13 m (7 ) Height (Tooth) Rack Back Angle at SAE Carry degree Full Dump at Maximum Li degree Rock Teeth & Segment Spade Coal Segment Straight 490-1840 484-6620 490-1860 490-1870 490-1850 490-1890 490-1880 294-9020 4824 15'1" 4742 15'7" 4480 14'8" 1906 6'3" 2118 6'11" 4849 15'11" 4607 15'1" 2092 6'10" 2326 7'8" 6927 22'9" 5114 16'9" 196 8" 15 736 51'8" 9313 30'7" 11 097 36'5" 3790 12'5" 52.7 50.0 9.5 12.4 4884 16'0" 4673 15'4" 4417 14'6" 1957 6'5" 2165 7'1" 4785 15'8" 4548 14'11" 2149 7'1" 2378 7'10" 6927 22'9" 5193 1 201 8" 15 818 51'11" 9313 30'7" 11 121 36'6" 3828 12'7" 12.3 16.0 10.2 13.3 12.3 16.0 4824 15'10" 4625 15'2" 4360 14'4" 1998 6'7" 2209 7'3" 4741 15'7" 4495 14'9" 2194 7'2" 2427 8'0" 6927 22'9" 5265 17'3" 201 8" 15 890 52'2" 9492 31'2" 11 131 36'6" 3863 12'8" 4884 16'0" 4742 15'7" 4486 14'9" 1906 6'3" 2114 6'11" 4849 15'11" 4612 15'2" 2092 6'10" 2322 7'7" 6927 22'9" 5108 16'9" 196 8" 15 729 51'7" 9313 30'7" 11 096 36'5" 3787 12'5" 9.5 12.4 4824 15'10" 4675 15'4" 4413 14'6" 1960 6'5" 2171 7'1" 4788 15'9" 4545 14'11" 2151 7'1" 2385 7'10" 6927 22'9" 5200 17'1" 198 8" 15 823 51'11" 9313 30'7" 11 122 36'6" 3834 12'7" 4900 16'1" 4832 15'10" 4574 15'0" 1858 6'1" 2092 6'10" 4935 16'2" 4699 15'5" 2036 6'8" 2292 7'6" 6927 22'9" 5025 16'6" 175 7" 15 632 51'3" 9392 30'10" 11 085 36'4" 3777 12'5" 4900 16'1" 4832 15'10" 4574 15'0" 1858 6'1" 2092 6'10" 4935 16'2" 4699 15'5" 2036 6'8" 2292 7'6" 6927 22'9" 5025 16'6" 175 7" 15 632 51'3" 9313 30'7" 11 085 36'4" 3777 12'5" 6090 20'0" 4772 15'8" 4772 15'8" 1925 6'4" 1925 6'4" 4881 16'0" 4881 16'0" 2109 6'11" 2109 6'11" 6927 22'9" 4767 15'8" 162 6" 15 366 50'5" 9489 31'2" 11 742 38'6" 3631 11'11" 52.8 52.8 52.7 52.7 52.5 52.5 52.4 50.0 50.0 50.0 50.0 50.0 50.0 50.0 (chart continued on next page) 27
992K Wheel Loader Specifications Operating Specifications Standard Li (Tier 2 Equivalent) (continued) For machines equipped with 45/58-R45 L-5 58 ply tires (SLR: 1308 /4'3"). Bucket Type Ground Engaging Tools Cutting Edge Type Bucket Part No. (Group Level) Bucket Load at Rated Capacity Rated Capacity Struck Capacity ISO Heaped Capacity ISO Straight Articulated 43 Articulated 40 Articulated 35 Bucket Level Ground Tipping Load with Squash at Operating Weight Straight Tipping Load with Squash at Operating Weight Articulated 43 Tipping Load with Squash at Operating Weight Articulated 40 Tipping Load with Squash at Operating Weight Articulated 35 Tipping Load with Squash at Operating Weight Bucket Level Ground Li Capacity Bucket Level Ground Breakout Force SAE Rated Operating Weight Weight Distribution at SAE Carry Front Weight Distribution at SAE Carry Rear Loaded Machine Weight Weight Distribution at SAE Carry Front Weight Distribution at SAE Carry Rear Shipping Weight m 3 m 3 m 3 f f Rock Teeth & Segment Spade Coal Segment Straight 490-1840 484-6620 490-1860 490-1870 490-1850 490-1890 490-1880 294-9020 62 261 137,263 52 531 115,811 53 787 118,581 55 711 122,822 49 607 109,365 60 183 132,681 48 716 107,401 50 118 110,492 52 298 115,297 47 744 105,258 52 038 114,724 58 459 128,879 98 882 217,999 54 652 120,487 44 231 97,512 117 933 259,999 86 247 190,142 31 686 69,856 95 511 210,566 9.5 12.4 61 550 135,694 51 852 114,315 53 105 117,076 55 022 121,302 48 376 106,651 59 475 131,120 48 048 105,927 49 445 109,007 51 618 113,797 46 575 102,680 51 178 112,828 55 991 123,439 99 275 218,865 55 387 122,107 43 889 96,758 118 326 260,865 87 043 191,898 31 283 68,967 95 905 211,434 12.3 16.0 10.2 13.3 12.3 16.0 61 246 135,024 51 538 113,622 52 792 116,386 54 711 120,617 47 465 104,642 59 135 130,370 47 685 105,128 49 085 108,214 51 263 113,015 45 702 100,755 50 489 111,310 54 243 119,584 99 655 219,703 56 017 123,496 43 638 96,206 118 706 261,703 87 689 193,321 31 018 68,382 96 284 212,270 60 780 133,998 51 050 112,546 52 307 115,316 54 230 119,557 48 562 107,061 58 712 129,437 47 250 104,169 48 651 107,258 50 830 112,061 46 687 102,927 50 839 112,080 57 835 127,504 100 261 221,039 56 991 125,643 43 271 95,395 119 312 263,039 88 590 195,307 30 723 67,732 97 678 215,343 9.5 12.4 61 810 136,267 52 112 114,888 53 365 117,649 55 282 121,875 48 595 107,133 59 733 131,690 48 305 106,494 49 702 109,575 51 875 114,365 46 791 103,157 51 391 113,297 56 140 123,767 99 056 218,382 54 993 121,239 44 064 97,143 118 107 260,382 86 647 191,024 31 461 69,359 95 686 210,952 58 730 129,477 48 999 108,025 50 256 110,795 52 179 115,035 48 003 105,829 56 659 124,912 45 197 99,642 46 598 102,731 48 777 107,534 46 017 101,451 49 521 109,176 59 374 130,896 102 431 225,823 60 481 133,337 41 951 92,486 121 482 267,823 92 073 202,987 29 409 64,836 99 849 220,129 60 359 133,070 50 629 111,618 51 885 114,388 53 809 118,629 49 384 108,872 58 292 128,513 46 832 103,247 48 233 106,336 50 412 111,139 47 413 104,527 51 094 112,643 60 210 132,741 100 637 221,868 57 629 127,050 43 009 94,818 119 688 263,868 89 217 196,689 30 472 67,179 99 849 220,129 60 503 133,387 50 767 111,923 52 024 114,694 53 949 118,937 48 174 106,205 58 302 128,534 46 790 103,154 48 197 106,257 50 387 111,085 46 256 101,977 50 219 110,715 57 297 126,318 101 039 222,754 57 980 127,824 43 059 94,930 101 039 222,754 57 980 127,824 43 059 94,930 28
992K Wheel Loader Specifications Operating Specifications High Li (Tier 4 Final) For machines equipped with 45/58-R45 L-5 46 ply tires (SLR: 1308 /4'3"). Bucket Type Ground Engaging Tools Cutting Edge Type Bucket Part No. (Group Level) Bucket Load at Rated Capacity Rated Capacity m 3 Struck Capacity ISO m 3 Heaped Capacity ISO m 3 Bucket Width Overall Clearance at 50 Dump (Edge) Clearance at 50 Dump (Tooth Tip) Reach at 50 Dump (Edge) Reach at 50 Dump (Tooth Tip) Clearance at 45 Dump (Edge) Clearance at 45 Dump (Tooth Tip) Reach at 45 Dump (Edge) Reach at 45 Dump (Tooth Tip) Bucket Pin at Maximum Li Horizontal Arm and Level Bucket Reach Digging Depth (Segment) in Overall Length Bucket Level Ground (Tooth) Overall Height Turning Radius Corner SAE Carry (Tooth) Clearance at 45 Dump and 2.13 m (7 ) Height (Tooth) Reach at 45 Dump and 2.13 m (7 ) Height (Tooth) Rack Back Angle at SAE Carry degree Full Dump at Maximum Li degree Rock Teeth & Segment Spade Coal Segment Straight 490-1840 484-6620 490-1860 490-1870 490-1850 490-1890 490-1880 294-9020 4824 15'10" 5359 17'7" 5097 16'9" 1773 5'10" 1985 6'6" 5466 17'11" 5224 17'2" 1960 6'5" 2193 7'2" 7544 24'9" 5504 18'1" 176 7" 16 197 53'2" 9930 32'7" 11 326 37'2" 4190 13'9" 52.5 45.0 9.5 12.4 4884 16'0" 5290 17'4" 5034 16'6" 1824 6'0" 2032 6'8" 5402 17'9" 5166 16'11" 2016 6'7" 2246 7'4" 7544 24'9" 5583 18'4" 181 7" 16 279 53'5" 9930 32'7" 11 352 37'3" 4230 13'11" 12.3 16.0 10.2 13.3 12.3 16.0 4824 15'10" 5242 17'2" 4977 16'4" 1865 6'1" 2076 6'10" 5358 17'7" 5112 16'9" 2061 6'9" 2294 7'6" 7544 24'9" 5655 18'7" 181 7" 16 351 53'8" 10 109 33'2" 11 363 37'3" 4265 14'0" 4884 16'0" 5359 17'7" 5103 16'9" 1773 5'10" 1982 6'6" 5466 17'11" 5229 17'2" 1960 6'5" 2189 7'2" 7544 24'9" 5498 18'0" 176 7" 16 191 53'1" 9930 32'7" 11 324 37'2" 4188 13'9" 9.5 12.4 4824 15'10" 5293 17'4" 5030 16'6" 1827 6'0" 2038 6'8" 5405 17'9" 5162 16'11" 2019 6'7" 2252 7'5" 7544 24'9" 5590 18'4" 178 7" 16 284 53'5" 9930 32'7" 11 352 37'3" 4235 13'11" 4900 16'1" 5450 17'11" 5192 1 1725 5'8" 1959 6'5" 5553 18'3" 5316 17'5" 1903 6'3" 2159 7'1" 7544 24'9" 5415 17'9" 155 6" 16 095 52'10" 10 009 32'10" 11 313 37'1" 4176 13'8" 4900 16'1" 5450 17'11" 5192 1 1725 5'8" 1959 6'5" 5553 18'3" 5316 17'5" 1903 6'3" 2159 7'1" 7544 24'9" 5415 17'9" 155 6" 16 095 52'10" 9930 32'7" 11 313 37'1" 4176 13'8" 6090 20'0" 5389 17'8" 5389 17'8" 1792 5'11" 1792 5'11" 5498 18'0" 5498 18'0" 1976 6'6" 1976 6'6" 7544 24'9" 5157 16'11" 142 6" 15 829 51'11" 10 106 33'2" 11 962 39'3" 4027 13'3" 52.5 52.5 52.5 52.5 52.3 52.3 52.1 45.0 45.0 45.0 45.0 45.0 45.0 45.0 (chart continued on next page) 29
992K Wheel Loader Specifications Operating Specifications High Li (Tier 4 Final) (continued) For machines equipped with 45/58-R45 L-5 46 ply tires (SLR: 1308 /4'3"). Bucket Type Ground Engaging Tools Cutting Edge Type Bucket Part No. (Group Level) Bucket Load at Rated Capacity Rated Capacity Struck Capacity ISO Heaped Capacity ISO Straight Articulated 43 Articulated 40 Articulated 35 Bucket Level Ground Tipping Load with Squash at Operating Weight Straight Tipping Load with Squash at Operating Weight Articulated 43 Tipping Load with Squash at Operating Weight Articulated 40 Tipping Load with Squash at Operating Weight Articulated 35 Tipping Load with Squash at Operating Weight Bucket Level Ground Li Capacity Bucket Level Ground Breakout Force SAE Rated Operating Weight Weight Distribution at SAE Carry Front Weight Distribution at SAE Carry Rear Loaded Machine Weight Weight Distribution at SAE Carry Front Weight Distribution at SAE Carry Rear Shipping Weight m 3 m 3 m 3 f f Rock Teeth & Segment Spade Coal Segment Straight 490-1840 484-6620 490-1860 490-1870 490-1850 490-1890 490-1880 294-9020 58 333 128,603 49 006 108,039 50 210 110,695 52 054 114,760 46 130 101,700 56 533 124,635 45 573 100,472 46 913 103,426 48 997 108,019 44 589 98,302 47 125 103,893 57 975 127,813 100 628 221,846 55 908 123,256 44 720 98,591 119 679 263,847 89 082 196,393 30 597 67,454 9.5 12.4 57 670 127,140 48 370 106,638 49 571 109,285 51 409 113,338 45 024 99,260 55 871 123,175 44 943 99,083 46 279 102,028 48 357 106,609 43 528 95,964 46 348 102,180 55 521 122,403 101 021 222,713 56 675 124,947 44 346 97,766 120 072 264,713 89 911 198,219 30 161 66,494 12.3 16.0 10.2 13.3 12.3 16.0 57 380 126,501 48 068 105,971 49 270 108,622 51 111 112,681 44 190 97,422 55 550 122,467 44 597 98,319 45 936 101,271 48 019 105,863 42 723 94,189 45 716 100,786 53 785 118,576 101 401 223,551 57 337 126,406 44 064 97,145 120 452 265,551 90 589 199,714 29 863 65,837 56 856 125,346 47 529 104,782 48 733 107,438 50 577 111,503 45 058 99,336 55 064 121,395 44 109 97,244 45 449 100,197 47 531 104,788 43 507 95,918 45 909 101,213 57 351 126,438 102 007 224,887 58 360 128,662 43 647 96,224 121 058 266,887 91 539 201,809 29 519 65,078 9.5 12.4 57 927 127,706 48 627 107,204 49 828 109,851 51 666 113,905 45 238 99,733 56 127 123,739 45 198 99,644 46 534 102,590 48 612 107,171 43 741 96,433 46 561 102,649 55 673 122,737 100 802 222,230 56 263 124,039 44 539 98,191 119 853 264,230 89 497 197,306 30 356 66,924 54 794 120,799 45 466 100,236 46 671 102,891 48 515 106,956 44 277 97,615 53 001 116,847 42 045 92,694 43 385 95,647 45 467 100,237 42 644 94,014 44 460 98,017 58 884 129,817 104 177 229,671 62 032 136,758 42 145 92,913 123 228 271,671 95 209 209,899 28 019 61,772 56 438 124,425 47 111 103,861 48 315 106,517 50 159 110,582 45 692 100,733 54 648 120,478 43 694 96,329 45 033 99,281 47 115 103,871 44 071 97,159 46 053 101,530 59 721 131,662 102 383 225,716 59 032 130,143 43 351 95,572 121 434 267,716 92 202 203,272 29 231 64,444 56 623 124,833 47 279 104,232 48 485 106,892 50 333 110,965 44 592 98,308 54 717 120,630 43 697 96,335 45 044 99,305 47 140 103,925 43 011 94,822 45 263 99,787 56 836 125,302 102 785 226,602 59 420 130,998 43 365 95,604 102 785 226,602 59 420 130,998 43 365 95,604 30
992K Wheel Loader Specifications Operating Specifications High Li (Tier 2 Equivalent) For machines equipped with 45/58-R45 L-5 46 ply tires (SLR: 1308 /4'3"). Bucket Type Ground Engaging Tools Cutting Edge Type Bucket Part No. (Group Level) Bucket Load at Rated Capacity Rated Capacity m 3 Struck Capacity ISO m 3 Heaped Capacity ISO m 3 Bucket Width Overall Clearance at 50 Dump (Edge) Clearance at 50 Dump (Tooth Tip) Reach at 50 Dump (Edge) Reach at 50 Dump (Tooth Tip) Clearance at 45 Dump (Edge) Clearance at 45 Dump (Tooth Tip) Reach at 45 Dump (Edge) Reach at 45 Dump (Tooth Tip) Bucket Pin at Maximum Li Horizontal Arm and Level Bucket Reach Digging Depth (Segment) in Overall Length Bucket Level Ground (Tooth) Overall Height Turning Radius Corner SAE Carry (Tooth) Clearance at 45 Dump and 2.13 m (7 ) Height (Tooth) Reach at 45 Dump and 2.13 m (7 ) Height (Tooth) Rack Back Angle at SAE Carry degree Full Dump at Maximum Li degree Rock Teeth & Segment Spade Coal Segment Straight 490-1840 484-6620 490-1860 490-1870 490-1850 490-1890 490-1880 294-9020 4824 15'10" 5359 17'7" 5097 16'9" 1773 5'10" 1985 6'6" 5466 17'11" 5224 17'2" 1960 6'5" 2193 7'2" 7544 24'9" 5504 18'1" 176 7" 16 197 53'2" 9930 32'7" 11 326 37'2" 4190 13'9" 52.5 45.0 9.5 12.4 4884 16'0" 5290 17'4" 5034 16'6" 1824 6'0" 2032 6'8" 5402 17'9" 5166 16'11" 2016 6'7" 2246 7'4" 7544 24'9" 5583 18'4" 181 7" 16 279 53'5" 9930 32'7" 11 352 37'3" 4230 13'11" 12.3 16.0 10.2 13.3 12.3 16.0 4824 15'10" 5242 17'2" 4977 16'4" 1865 6'1" 2076 6'10" 5358 17'7" 5112 16'9" 2061 6'9" 2294 7'6" 7544 24'9" 5655 18'7" 181 7" 16 351 53'8" 10 109 33'2" 11 363 37'3" 4265 14'0" 4884 16'0" 5359 17'7" 5103 16'9" 1773 5'10" 1982 6'6" 5466 17'11" 5229 17'2" 1960 6'5" 2189 7'2" 7544 24'9" 5498 18'0" 176 7" 16 191 53'1" 9930 32'7" 11 324 37'2" 4188 13'9" 9.5 12.4 4824 15'10" 5293 17'4" 5030 16'6" 1827 6'0" 2038 6'8" 5405 17'9" 5162 16'11" 2019 6'7" 2252 7'5" 7544 24'9" 5590 18'4" 178 7" 16 284 53'5" 9930 32'7" 11 352 37'3" 4235 13'11" 4900 16'1" 5450 17'11" 5192 1 1725 5'8" 1959 6'5" 5553 18'3" 5316 17'5" 1903 6'3" 2159 7'1" 7544 24'9" 5415 17'9" 155 6" 16 095 52'10" 10 009 32'10" 11 313 37'1" 4176 13'8" 4900 16'1" 5450 17'11" 5192 1 1725 5'8" 1959 6'5" 5553 18'3" 5316 17'5" 1903 6'3" 2159 7'1" 7544 24'9" 5415 17'9" 155 6" 16 095 52'10" 9930 32'7" 11 313 37'1" 4176 13'8" 6090 20'0" 5389 17'8" 5389 17'8" 1792 5'11" 1792 5'11" 5498 18'0" 5498 18'0" 1976 6'6" 1976 6'6" 7544 24'9" 5157 16'11" 142 6" 15 829 51'11" 10 106 33'2" 11 962 39'3" 4027 13'3" 52.5 52.5 52.5 52.5 52.3 52.3 52.1 45.0 45.0 45.0 45.0 45.0 45.0 45.0 (chart continued on next page) 31
992K Wheel Loader Specifications Operating Specifications High Li (Tier 2 Equivalent) (continued) For machines equipped with 45/58-R45 L-5 46 ply tires (SLR: 1308 /4'3"). Bucket Type Ground Engaging Tools Cutting Edge Type Bucket Part No. (Group Level) Bucket Load at Rated Capacity Rated Capacity Struck Capacity ISO Heaped Capacity ISO Straight Articulated 43 Articulated 40 Articulated 35 Bucket Level Ground Tipping Load with Squash at Operating Weight Straight Tipping Load with Squash at Operating Weight Articulated 43 Tipping Load with Squash at Operating Weight Articulated 40 Tipping Load with Squash at Operating Weight Articulated 35 Tipping Load with Squash at Operating Weight Bucket Level Ground Li Capacity Bucket Level Ground Breakout Force SAE Rated Operating Weight Weight Distribution at SAE Carry Front Weight Distribution at SAE Carry Rear Loaded Machine Weight Weight Distribution at SAE Carry Front Weight Distribution at SAE Carry Rear Shipping Weight m 3 m 3 m 3 f f Rock Teeth & Segment Spade Coal Segment Straight 490-1840 484-6620 490-1860 490-1870 490-1850 490-1890 490-1880 294-9020 58 052 127,982 48 701 107,368 49 909 110,030 51 757 114,105 45 909 101,212 56 256 124,022 45 261 99,784 46 605 102,746 48 694 107,352 44 373 97,825 47 125 103,893 57 975 127,813 100 072 220,621 55 566 122,501 44 506 98,120 119 123 262,621 88 743 195,644 30 380 66,977 9.5 12.4 57 389 125,690 48 067 105,272 49 270 107,909 51 113 111,945 44 805 98,130 55 594 121,760 44 632 97,751 45 972 100,685 48 055 105,248 43 315 94,865 46 348 101,508 55 521 121,599 100 465 220,032 56 333 123,376 44 132 96,656 119 516 261,756 89 571 196,172 29 945 65,584 12.3 16.0 10.2 13.3 12.3 16.0 57 099 125,882 47 764 105,301 48 969 107,959 50 815 112,027 43 974 96,946 55 273 121,857 44 286 97,634 45 629 100,594 47 717 105,198 42 512 93,723 45 716 100,786 53 785 118,576 100 845 222,325 56 995 125,652 43 850 96,673 119 896 264,325 90 249 198,965 29 647 65,360 56 574 124,725 47 224 104,111 48 432 106,773 50 280 110,848 44 837 98,848 54 786 120,783 43 798 96,557 45 140 99,517 47 228 104,121 43 291 95,440 45 909 101,213 57 351 126,438 101 451 223,661 58 018 127,908 43 433 95,753 120 502 265,661 91 199 201,060 29 303 64,601 9.5 12.4 57 646 127,087 48 323 106,535 49 527 109,189 51 370 113,252 45 020 99,252 55 850 123,128 44 887 98,959 46 227 101,913 48 310 106,506 43 528 95,962 46 561 102,649 55 673 122,737 100 246 221,004 55 921 123,285 44 325 97,719 119 297 263,005 89 157 196,557 30 140 66,447 54 512 120,179 45 162 99,565 46 369 102,227 48 218 106,302 44 051 97,116 52 723 116,234 41 734 92,007 43 076 94,967 45 165 99,571 42 423 93,528 44 460 98,017 58 884 129,817 103 621 228,445 61 690 136,004 41 930 92,441 122 672 270,445 94 869 209,151 27 803 61,294 56 157 123,804 46 806 103,190 48 014 105,852 49 862 109,927 45 466 100,235 54 370 119,865 43 382 95,642 44 725 98,602 46 813 103,205 43 850 96,673 46 053 101,530 59 721 131,662 101 827 224,490 58 690 129,389 43 137 95,100 120 878 266,490 91 863 202,523 29 015 63,967 56 341 124,211 46 974 103,559 48 183 106,226 50 035 110,309 44 369 97,817 54 440 120,019 43 385 95,649 44 736 98,626 46 837 103,259 42 793 94,343 45 263 99,787 56 836 125,302 102 229 225,376 59 078 130,244 43 151 95,132 102 229 225,376 59 078 130,244 43 151 95,132 32
992K Standard Equipment Standard Equipment Standard equipment may vary. Consult your Cat dealer for details. POWER TRAIN Air-to-Air Aer Cooler (ATAAC) Axle oil coolers (front and rear) Brakes, full hydraulic, enclosed, wet multiple disc service brakes and dry parking/secondary brake Case drain filters Demand fan Driveline, electro-hydraulic parking brake Electric fuel priming pump Engine Cat C32 ACERT Ground level engine shutdown Ground level fast fill fuel Ground level transmission lockout Ground level starter lockout Precleaner, engine air intake Radiator, Aluminum Modular (AMR) Starting aid, ether, automatic Throttle lock Transmission, 533 (21 in) planetary powershi with 3F/3R with electronic control ELECTRICAL Alarm, back-up Alternator, 150-amp Batteries, low maintenance Converter, 10-amp, 24V to 12V Deutsch and amp seal terminal connectors Ground level electrical disconnect Ground level starting receptacle for emergency start Light, warning strobe Lights, front and rear, access stairway, turn signals/hazard lights Starter, electric (heavy duty) Starting and charging system, 24V, ECM diagnostic connector OPERATOR ENVIRONMENT Air conditioner and heater with automatic temperature control Cab, sound suppressed, pressurized, rollover protective structure (ROPS/FOPS), radio ready for (entertainment) includes antenna, speakers, and a 12V converter (24-volt, 10-amp) for use with laptop/cell phone use Camera, rear vision Cigar lighter Coat hook Electro-hydraulic tilt and li controls Horn, electric Implement and steering lockouts Light, dome (cab) Lunchbox and beverage holders Mirrors, rearview (externally mounted) Seat, Cat Comfort with air suspension Seat belt, 2-point, 76 (3 in), minder Steering and transmission lock lever STIC control system Tie-offs on ROPS Tinted glass Trainer seat with 76 (3 in) wide lap belt Transmission gear indicator VIMS (Vital Info Management System): 3G with graphical information display Cycle timer External data port Integral Cat Production Measurement (Cat PM) Wet-arm wipers/washer (front, rear, and corners), intermittent front wipers SAFETY AND SECURITY Fire suppression ready OTHER STANDARD EQUIPMENT Automatic lubrication system Bumper service center Couplings, Cat O-ring face seals Doors, service access (locking) Economy mode Emergency platform egress Fenders, steel (front and rear) Fuel, fast fill Grouped hydraulic pressure ports Guards, power train and crankcase Hitch, drawbar with pin Hoses, Cat XT and XT-ES Hydraulic oil cooler Impeller clutch Implement and steering ecology drains Mufflers, under hood Oil sampling valves Piston pump case drain filters Service center with ground level electrical and fluids service center Sight gauges: Steering oil level Implement oil level Transmission oil level Coolant level Stairway, le and right rear access Starter lockout, bumper Steering, load sensing Tie-offs on ROPS Toe kicks Transmission lockout, bumper Vandalism protection caplocks Venturi stacks (2) 33