Stannah Maxilift 2.0 passenger lift range Lift finishes and options www.stannahlifts.co.uk
Designed with modern living in mind the Maxilift 2.0 offers clean, sleek lines and smooth operation. We have a variety of car finish styles to suit every budget. Our customers can mix and match to ensure the lift complements the interior of any building. Contents Car walls Car ceilings Car floors Car operating panels Landing controls and indicators Mirrors and handrails Maxilift 2.0 standard specification Example configurations Please note: costs may vary and are dependent on the choice of finishes selected.
Car walls Samples are available on request please call: 01264 339090 The colours and designs reproduced in this document have been matched as closely as the scanning and printing process will allow. It is recommended you obtain samples prior to final specification. We are continually developing and improving our range of products and finishes and we therefore reserve the right to alter or amend the specification without prior notice. Cream Silver Grey Slate Blue Cream Swirl Vinyl skinplates A90GTA F12PPS B13 PPS13 Satin Mirror Linen Checks Stainless steel Please note All skirting, corner profiling and entrance returns are satin stainless steel as standard excluding vinyl skinplate where it matches the chosen colour. The stainless steel grading is AIS1441 as standard. We also offer AIS1304 as a special option. Light Blue Light Grey Sand Woodgrain Grey Chestnut Woodgrain Laminates DU1715VV Redwood DU8110 Birch Woodgrain 2982 Mahogany 2416 Dark Pear Walnut Golden Oak 2042 2228 2307 5410 AB1306 5372 Yellow Orange Burgundy Green Blue Neutral Black Glass 4090 504090 RM PS YB9 PS BM15 MW AC7 NEXT MAXILIFT 2.0 1: CAR WALLS
Car ceilings Panel Standard Please note All suspended ceilings with stainless steel finish as standard. All ceilings are available with standard halogen lighting (no. of lights is dependent on cabin size) or high energy efficiency (LED). O55 Mirror stainless steel and plexiglass diffuser. 3x fluorescent tubes. Frame Grid Bubble Aperture Options O3 Mirror stainless steel and plexiglass diffuser. 2x fluorescent tubes + 4x LED spots. O14 Mirror stainless steel and plexiglass diffuser. 4x fluorescent tubes. O11 Mirror stainless steel and plexiglass diffuser. 4x fluorescent tubes. O10 Mirror stainless steel and plexiglass diffuser. 3x fluorescent tubes. This style is also suitable for low headroom cabins. NEXT MAXILIFT 2.0 2: CAR CEILINGS
Car floors Samples are available on request please call: 01264 339090 The colours and designs reproduced in this document have been matched as closely as the scanning and printing process will allow. It is recommended you obtain samples prior to final specification. We are continually developing and improving our range of products and finishes and we therefore reserve the right to alter or amend the specification without prior notice. Black Sparkle Grey Sparkle Sandstone PVC flooring 6801 6768 MX19101 Black Oak Birch Dark Cherry Grey Chestnut Laminate flooring 8766 1675 8459 8096 White Beige Black Artificial granite RW RB RK Please note: Floors can be left recessed for finishing by others. NEXT MAXILIFT 2.0 3: CAR FLOORS
Car operating panels Standard car operating panel 200mm(w) x 2000mm(h) Satin stainless steel with dot matrix position and direction of travel indicator (LCD position indicator optional) Push buttons MT42 Radius cornered squares 30 x 30mm Satin stainless steel or mirror stainless steel AKC BES NEXT MAXILIFT 2.0 4: CAR OPERATING PANELS
Landing controls & indicators Landing indicators 230mm(w) x 92mm(h) x 20mm(d) Satin stainless steel SMRQ 909DMA Landing operating panels Standard configurations Flush mounted Single button collective. Optional highest call-down collective. 85mm(w) x 180mm(h) Surface mounted Single button collective. Optional highest call-down collective. 88mm(w) x 202.4mm(h) AKL 001 SMRQ 300A SMSC 600 Surface mounted Fully directional call collective. 88mm(w) x 202.4mm(h) Please note: SMRQ & SMSC call button panels shown can be surface mounted direct onto wall or lift architrave no need for apertures NEXT ADDITIONAL NOTES MAXILIFT 2.0 5: LANDING CONTROLS & INDICATORS
Mirrors and handrails Mirrors Handrails K3 mirror stainless steel available as standard. EN81-70 compliant. K2a mirror stainless steel available as standard. EN81-70 non-compliant. Half height, full width mirror fitted as standard Full height and narrow options available NEXT MAXILIFT 2.0 6: MIRRORS AND HANDRAILS
Maxilift 2.0 standard specification Lift car: fabricated steel lift car frame including header assembly, platform buffer plates and guide shoes with lubricators Car & landing doors: finished in stainless steel Doors: 2hr fire-rated doors in 800, 900 & 1000mm width, 2000mm height Communication options: EN81-28 compliant autodialler Motor drive type: electronic hydraulic valve with optional VVVF drive, MRL Configuration: cantilever sling design mounted on a load-bearing wall Rated speed: up to 1 m/s Additional standard features: Automatic relevelling to landing floor Anti-creep device to prevent movement away from landing Overload weighing device Emergency lighting within lift car giving 3hr duration NEXT MAXILIFT 2.0 8: STANDARD SPECIFICATION
Example configuration 1 Walls & skirting: Silver Grey (F12 PPS) vinyl skinplate Handrail: K3 mirror stainless steel handrail Car operating panel: Standard satin stainless steel Ceiling: Panel (O55) Stainless steel mirror and plexiglass 3x fluorescent tubes NEXT PAGE MAXILIFT 2.0 9: EXAMPLE CONFIGURATION 1
Example configuration 2 Walls & skirting: Satin stainless steel Handrail: Custom handrail Car operating panel: Standard satin stainless steel with round push buttons Ceiling: Aperture (O10) Mirror stainless steel and plexiglass 3x fluorescent tubes NEXT PAGE MAXILIFT 2.0 9: EXAMPLE CONFIGURATION 2
Example configuration 3 Walls & skirting: Redwood (DU5610HG) laminate and satin stainless steel Handrail: Custom handrail Car operating panel: Standard satin stainless steel with round push buttons Ceiling: Panel (O55) Stainless steel mirror and plexiglass 3x fluorescent tubes MAXILIFT 2.0 9: EXAMPLE CONFIGURATION 3
Additional notes
Additional notes landing controls & indicators LANDING CONTROLS & INDICATORS Travel indicators The landing lift travel indicator is on all landing levels. Landing control options There are an array of options within the display including LED or LCD and round instead of square buttons. For further details please contact us. RETURN TO PAGE MAXILIFT 2.0 ADDITIONAL NOTES LANDING CONTROLS & INDICATORS
Stannah Lifts Anton Mill, Andover, Hampshire SP10 2NX Telephone: 01264 339090 www.stannahlifts.co.uk