THAT S WHAT WE CALL HEAVY LIFTING!

THAT S WHAT WE CALL HEAVY LIFTING!

Enerpac High-Tonnage s HCL-2006, LPL-602, HCR-2006 Highest Level of Durability Reaching the Summit Edition: Substrate bonded multi-layer treatment Hardened surface resists side-loading and cyclic wear Weather protected, inside and out Low friction to easily spin the load locking rings 1) Enclosed polymer bearing system pper and lower bearings enclose the cylinder plunger for support and are able to be replaced along with seals and other soft parts State-of-the-art bearing material provides maximum conformity to reduce wear and avoid bore damage even in high side-load conditions Low-wear, high-pressure seals Improved geometry and material selection increases seal performance even in harsh conditions Low friction improves retraction times The Summit Edition Innovation is at the heart of the new Summit Edition of cylinders, delivering the high quality construction that you expect Enerpac. The durability ensures your job gets done safely and reliably. support bearing adds support for eccentric loads 2) Nitrocarburization surface treatment for improved wear resistance and corrosion protection Replaceable composite bearings surround the seal providing support for eccentric loads Low wear, high pressure seals provide longer service life 2) Eccentric load (or side-load ) is inevitable in heavy lifting. Our unique Summit Edition features provide the ultimate protection against side-load. Increased bearing surface maintains stability, and nitrocarburization treatment prevents scoring on the inside of the cylinder. Side-load poses a real problem... our new cylinder features are the solution! Bridge lifting and launching system. The load is balanced on groups of lock nut cylinders. The hydraulic movements are synchronized using the Enerpac PLC-controlled synchronous lift systems. Versatile Over 200 models in four configurations 1) Certified lifting eyes, base mounting holes and collar threads are included for secure handling and cylinder mounting 1) 1) See specific models technical data for more information. 2 www.enerpac.com

Enerpac High-Tonnage s High-Tonnage s The Enerpac High-Tonnage s are particularly suitable for (multipoint) lifting applications. In combination with our state-of-theart power packs, you will have a world class hydraulic system to perform the most challenging lifting jobs in a safe and professional manner. See the back page for more information on our pump offering. HCG, HCR, HCL-Series s 50-1000-ton lifting capacity - inch lifting stroke HCG-Series - single acting gravity-return stop-ring to prevent plunger blow-out 10% side-load resistance over full stroke HCR-Series - double acting hydraulic advance and retract for controlled movement 10% side-load resistance over full stroke HCL-Series - lock nut, single acting gravity-return lock nut for mechanical load holding overflow port to prevent plunger blow out 10% side-load resistance over full stroke LPL-Series - lock nut, low height, single acting 60-500-ton lifting capacity 1.77 - inch lifting stroke integrated tilt saddle gravity-return lock nut for mechanical load holding 10% side-load resistance over full stroke HCG HCR HCL LPL Series : 50-1000 ton Stroke: 1.77 - inch. Maximum Operating Pressure: Certified lifting eyes Overflow plug prevents plunger blow-out (HCL, LPL) Safety valve prevents over-pressurization (HCR) Interchangeable saddle prevents plunger damage. Integrated Tilt allows for up to 5 degree misalignment (LPL) Lock nut provides safe mechanical load holding (HCL, LPL) Low friction wiper protects against contamination (HCG, HCR) Full load stop-ring (HCG, HCR) Collar threads for versatile cylinder mounting (HCG, HCR) 4 Assisted Return Pumps Enerpac HCG, HCL and LPL- Series cylinders are hydraulic advance and gravity-return. To improve productivity and plunger retraction Enerpac offers assisted return on Z4 and ZE-Series pumps featuring Enerpac Venturi valve technology, specifically to facilitate the faster return of single-acting, gravityreturn cylinders. See enerpac.com for details. Split-Flow Pumps SFP-Series pumps with multiple outlets with equal oil flow. For lifting and lowering applications on multiple points these pumps are a far better alternative than using separately operated pumps. Nitrocarburization surface on base, plunger, stop-ring and lock nut 20 Replaceable composite plunger support bearings Low-wear, high-pressure seals provide longer service life High-flow couplers for fast advance and retract Synchronous Lifting Systems Pumps for multiple lift-point capabilities. The economical EVOB-Series for basic applications and the multifunctional EVO-Series lifting system. Base mounting holes for versatile mounting (except LPL) 20

4 www.enerpac.com 14 10 6 HCG-502 HCG-504 HCG-506 HCG-508 HCG-5010 HCG-5012 HCG-1002 HCG-1004 HCG-1006 HCG-1008 HCG-10010 HCG-10012 HCG-1502 HCG-1504 HCG-1506 HCG-1508 HCG-15010 HCG-15012 HCG-2002 HCG-2004 HCG-2006 HCG-2008 HCG-20010 HCG-20012 HCG-2502 HCG-2504 HCG-2506 HCG-2508 HCG-25010 HCG-25012 HCG-002 HCG-004 HCG-006 HCG-008 HCG-0010 HCG-0012 HCL-502 HCL-504 HCL-506 HCL-508 HCL-5010 HCL-5012 HCL-1002 HCL-1004 HCL-1006 HCL-1008 HCL-10010 HCL-10012 HCL-1502 HCL-1504 HCL-1506 HCL-1508 HCL-15010 HCL-15012 HCL-2002 HCL-2004 HCL-2006 HCL-2008 HCL-20010 HCL-20012 HCL-2502 HCL-2504 HCL-2506 HCL-2508 HCL-25010 HCL-25012 HCL-002 HCL-004 HCL-006 HCL-008 HCL-0010 HCL-0012 HCR-502 HCR-504 HCR-506 HCR-508 HCR-5010 HCR-5012 HCR-1002 HCR-1004 HCR-1006 HCR-1008 HCR-10010 HCR-10012 HCR-1502 HCR-1504 HCR-1506 HCR-1508 HCR-15010 HCR-15012 HCR-2002 HCR-2004 HCR-2006 HCR-2008 HCR-20010 HCR-20012 HCR-2502 HCR-2504 HCR-2506 HCR-2508 HCR-25010 HCR-25012 HCR-002 HCR-004 HCR-006 HCR-008 HCR-0010 HCR-0012 50 100 150 200 250 00 Single-Acting Single-Acting With Lock Nut Double-Acting QICK SELECTION Stroke Maximum at HCG-Series HCL-Series HCR-Series Enerpac High-Tonnage s 62 11 168 22 286 41 7.20 9.17 11.14 1.62 15.59 17.56 7.95 9.92 11.89 14.92 16.89 18.86 8.66 10.6 12.60 15.6 17.60 19.57 9.09 11.06 1.0 16.06 18.0 20.00 9.49 11.46 1.4 16.97 18.94 20.91 11.65 1.62 15.59 17.56 19.5 21.50 6.46 8.4 10.9 12.6 14. 16.0 7.6 9. 11.0 1.27 15.24 17.20 8.2 10.20 12.17 14.1 16.10 18.07 9.7 11.4 1.1 15.28 17.24 19.21 9.80 11.77 1.74 15.71 17.68 19.65 10.94 12.91 14.88 16.85 18.82 20.79 7.20 9.17 11.14 1.62 15.59 17.56 7.95 9.92 11.89 14.92 16.89 18.86 8.66 10.6 12.60 15.6 17.60 19.57 9.09 11.06 1.0 16.06 18.0 20.00 9.49 11.46 1.4 16.97 18.94 20.91 11.65 1.62 15.59 17.56 19.5 21.50

5 16 12 8 HCG-4002 HCG-4004 HCG-4006 HCG-4008 HCG-40010 HCG-40012 HCG-5002 HCG-5004 HCG-5006 HCG-5008 HCG-50010 HCG-50012 HCG-6002 HCG-6004 HCG-6006 HCG-6008 HCG-60010 HCG-60012 HCG-8002 HCG-8004 HCG-8006 HCG-8008 HCG-80010 HCG-80012 HCG-10002 HCG-10004 HCG-10006 HCG-10008 HCG-100010 HCG-100012 HCL-4002 HCL-4004 HCL-4006 HCL-4008 HCL-40010 HCL-40012 HCL-5002 HCL-5004 HCL-5006 HCL-5008 HCL-50010 HCL-50012 HCL-6002 HCL-6004 HCL-6006 HCL-6008 HCL-60010 HCL-60012 HCL-8002 HCL-8004 HCL-8006 HCL-8008 HCL-80010 HCL-80012 HCL-10002 HCL-10004 HCL-10006 HCL-10008 HCL-100010 HCL-100012 HCR-4002 HCR-4004 HCR-4006 HCR-4008 HCR-40010 HCR-40012 HCR-5002 HCR-5004 HCR-5006 HCR-5008 HCR-50010 HCR-50012 HCR-6002 HCR-6004 HCR-6006 HCR-6008 HCR-60010 HCR-60012 HCR-8002 HCR-8004 HCR-8006 HCR-8008 HCR-80010 HCR-80012 HCR-10002 HCR-10004 HCR-10006 HCR-10008 HCR-100010 HCR-100012 400 500 600 800 1000 Single-Acting Single-Acting With Lock Nut Double-Acting QICK SELECTION Stroke Maximum at HCG-Series HCL-Series HCR-Series HCG HCR HCL Series : 50-1000 ton Stroke: - inch Maximum Operating Pressure: Enerpac High-Tonnage s 450 575 67 916 1196 12.64 14.61 16.57 18.54 20.51 22.48 1.54 15.51 17.48 19.45 2 2.9 1.86 15.8 17.80 19.76 21.7 2.70 1 1 1 21.81 2.78 25.75 17.40 19.7 21.4 2.1 25.28 27.24 12.48 14.45 16.42 18.9 20.5 22.2 14.06 16.02 17.99 19.96 21.9 2.90 14.96 16.9 18.90 2 22.8 24.80 16.9 18.90 2 22.8 24.80 26.77 19.06 21.02 22.99 24.96 26.9 28.90 12.64 14.61 16.57 18.54 20.51 22.48 1.54 15.51 17.48 19.45 2 2.9 1.86 15.8 17.80 19.76 21.7 2.70 1 1 1 21.81 2.78 25.75 17.40 19.7 21.4 2.1 25.28 27.24

HCG-Series, High-Tonnage s X W HCG-Series, Single-Acting, Gravity-Return s Hardened surface resists side-loading and cyclic wear 10% side-load resistance over full stroke Stop-ring to prevent plunger blow-out Weather protected, inside and out pper and lower replaceable bearings enclose the cylinder plunger for support throughout the stroke Certified lifting eyes, base mounting holes and collar threads SELECTION CHART 50 00-TON HCG-MODELS For 400 1000-ton models, see pages 8-9. For full product features see pages 2-. Collar / HCG-50 HCG-100 HCG-150 HCG-200 HCG-250 HCG-00 / HCG-50 HCG-100 HCG-150 HCG-200 HCG-250 HCG-00 Size W M10 x 2 M175 x M215 x M250 x M280 x M05 x Base Mounting Holes Bolt Circle 4.1 7.28 8.46 9.65 10.24 Length X 1.18 1.81 2.17 2.48 2.52 2.87 Size V M12 x 1,75 M12 x 1,75 M12 x 1,75 M12 x 1,75 M12 x 1,75 M16 x 2 HCG-50-150 ton HCG-200-00 ton The collar thread length is designed for the full rated cylinder capacity. Minimum Depth Z 0.98 of Holes 2 2 2 Angle Coupler 90 90 90 Stroke * Maximum at Efective Area Oil (in 2 ) (in ) HCG-502 HCG-504 2.96 47.9 50 HCG-506 71.89 62 12.17 HCG-508 95.86 HCG-5010 HCG-5012 HCG-1002 HCG-1004 119.82 14.78 4.67 87.5 100 HCG-1006 11.02 11 22.19 HCG-1008 174.70 HCG-10010 HCG-10012 HCG-1502 HCG-1504 218.7 262.05 65.24 10.48 150 HCG-1506 195.7 168.14 HCG-1508 260.97 HCG-15010 HCG-15012 HCG-2002 HCG-2004 26.21 91.45 86.51 17.02 200 HCG-2006 259.5 22 4.95 HCG-2008 46.04 HCG-20010 HCG-20012 HCG-2502 HCG-2504 42.55 519.06 110.77 221.55 250 HCG-2506 2.2 286 56.27 HCG-2508 44.09 HCG-25010 HCG-25012 HCG-002 HCG-004 55.87 664.64 12.4 264.68 00 HCG-006 97.02 41 67.2 HCG-008 529.6 HCG-0010 HCG-0012 661.71 794.05 * 1500- and 2000-ton models and additional stroke lengths available on request. A 7.20 9.17 11.14 1.62 15.59 17.56 7.95 9.92 11.89 14.92 16.89 18.86 8.66 10.6 12.60 15.6 17.60 19.57 9.09 11.06 1.0 16.06 18.0 20.00 9.49 11.46 1.4 16.97 18.94 20.91 11.65 1.62 15.59 17.56 19.5 21.50 6 www.enerpac.com

Single-Acting, High-Tonnage s : 50-00 ton Stroke: - inch Maximum Operating Pressure: HCG Series CATG-Series Tilt Extended B 9.17 1.11 17.05 21.50 25.4 29.7 9.92 1.86 17.80 22.80 26.7 0.67 10.6 14.57 18.50 2.50 27.44 1.8 11.06 15.00 18.94 2 2 1.81 11.46 15.9 19. 24.84 28.78 2.72 1.62 17.56 21.50 25.4 29.7.1 Outside D Bore E F Base to Advance Port H Standard J Protrusion K 5.12 2.76 1.50 0.12 6.89 5.1.74 1.50 2.95 0.12 8.46 6.50 4.72 1.61.70 0.12 7.48 5.51 1.85 4.45 0.12 11.02 8.46 6.69 2.09 5.71 0.16 12.01 9.25 2.28 6.97 0.16 Wt. (lbs) 7 45 5 64 72 80 7 88 102 128 142 157 12 145 168 207 20 25 178 209 240 00 1 6 25 277 18 401 442 484 48 401 454 507 560 61 * HCG-502 HCG-504 HCG-506 HCG-508 HCG-5010 HCG-5012 HCG-1002 HCG-1004 HCG-1006 HCG-1008 HCG-10010 HCG-10012 HCG-1502 HCG-1504 HCG-1506 HCG-1508 HCG-15010 HCG-15012 HCG-2002 HCG-2004 HCG-2006 HCG-2008 HCG-20010 HCG-20012 HCG-2502 HCG-2504 HCG-2506 HCG-2508 HCG-25010 HCG-25012 HCG-002 HCG-004 HCG-006 HCG-008 HCG-0010 HCG-0012 Optional Tilt J1 K1 0.94 2.87 1.14.57 1.22 4.64 1.7 5.67 1.85 6.0 2.51 CATG-50 CATG-100 CATG-150 CATG-200 CATG-250 CATG-00 7

HCG-Series, High-Tonnage s HCG-Series, Single-Acting, Gravity-Return s Hardened surface resists side-loading and cyclic wear 10% side-load resistance over full stroke Stop-ring to prevent plunger blow-out Weather protected, inside and out pper and lower replaceable bearings enclose the cylinder plunger for support throughout the stroke Certified lifting eyes, base mounting holes and collar threads W X Collar / HCG-400 HCG-500 HCG-600 HCG-800 HCG-1000 / HCG-400 HCG-500 HCG-600 HCG-800 HCG-1000 Size W M50 x M400 x 4 M40 x 4 M505 x 5 M570 x 5 Base Mounting Holes Bolt Circle 1.9 14.57 17.2 19.69 Length X.27.54 4.80 5.9 Size V M16 x 2 M24 x M24 x M24 x M24 x The collar thread length is designed for the full rated cylinder capacity. Minimum Depth Z 0.98 of Holes Angle Coupler SELECTION CHART 400 1000-TON HCG-MODELS For 50 00-ton models, see pages 6-7. For full product features see pages 2-. Stroke * Maximum at Efective Area Oil (in 2 ) (in ) HCG-4002 HCG-4004 174.70 49.9 400 HCG-4006 524.09 450 88.75 HCG-4008 698.79 HCG-40010 HCG-40012 HCG-5002 HCG-5004 87.49 1,048.18 222.92 445.85 500 HCG-5006 668.77 575 11.25 HCG-5008 891.70 HCG-50010 HCG-50012 HCG-6002 HCG-6004 1,114.62 1,7.55 260.97 521.94 600 HCG-6006 782.90 67 12.57 HCG-6008 1,04.87 HCG-60010 HCG-60012 HCG-8002 HCG-8004 1,04.84 1,565.81 55.21 710.41 800 HCG-8006 1,065.62 916 180.44 HCG-8008 1,420.82 HCG-80010 HCG-80012 HCG-10002 HCG-10004 1,776.0 2,11.24 46 927.88 1000 HCG-10006 1,91.8 1196 25.68 HCG-10008 1,855.77 HCG-100010 HCG-100012 2,19.71 2,78.65 * 1500- and 2000-ton models and additional stroke lengths available on request. A 12.64 14.61 16.57 18.54 20.51 22.48 1.54 15.51 17.48 19.45 2 2.9 1.86 15.8 17.80 19.76 21.7 2.70 1 1 1 21.81 2.78 25.75 17.40 19.7 21.4 2.1 25.28 27.24 8 www.enerpac.com

Single-Acting, High-Tonnage s HCG Series Offshore wind turbine leveling: Enerpac's synchronous lifting system was the solution for leveling support cross pieces on 80 wind turbines. : 400-1000 ton Stroke: - inch Maximum Operating Pressure: CATG-Series Tilt Extended B 14.61 18.54 22.48 26.42 0.5 4.29 15.51 19.45 2.9 27.2 1.26 5.20 15.8 19.76 2.70 27.64 1.57 5.51 1 21.81 25.75 29.69.62 7.56 19.7 2.1 27.24 1.18 5.12 9.06 Outside Bore Base to Advance Port Standard Protrusion K Wt. * HCG-4002 HCG-4004 HCG-4006 HCG-4008 HCG-40010 HCG-40012 HCG-5002 HCG-5004 HCG-5006 HCG-5008 HCG-50010 HCG-50012 HCG-6002 HCG-6004 HCG-6006 HCG-6008 HCG-60010 HCG-60012 HCG-8002 HCG-8004 HCG-8006 HCG-8008 HCG-80010 HCG-80012 HCG-10002 HCG-10004 HCG-10006 HCG-10008 HCG-100010 HCG-100012 Optional Tilt D E F H J (lbs) J1 K1 500 566 1.78 10.6 8.66 2.91 7.72 0.16 6 7.59 2.2 15.75 12.01.11 8.98 0.16 880 968 8.98 2.48 1,056 1,144 84 95 16.9 12.99 10.6.5 9.72 0.16 1,06 1,17 9.47.08 1,29 1,40 1,6 1,479 19.88 15.16 12.60 11.69 0.16 1,621 1,76 11.28.41 1,905 2,047 1,852 2,020 22.44 17.2 1.9 4.49 12.72 0.16 2,188 2,55 12.26.65 2,52 2,691 699 766 8 704 792 CATG-400 CATG-500 CATG-600 CATG-800 CATG-1000 9

HCR-Series, High-Tonnage s I W X HCR-Series, Double-Acting s Fast advance and retract 10% side-load resistance over full stroke Hardened surface resists side-loading and cyclic wear Weather protected, inside and out pper and lower replaceable bearings enclose the cylinder plunger for support throughout the stroke Certified lifting eyes, base mounting holes and collar threads Collar / HCR-50 HCR-100 HCR-150 HCR-200 HCR-250 HCR-00 / HCR-50 HCR-100 HCR-150 HCR-200 HCR-250 HCR-00 Size W M10 x 2 M175 x M215 x M250 x M280 x M05 x Base Mounting Holes Bolt Circle 4.1 7.28 8.46 9.65 10.24 Length X 1.18 1.81 2.17 2.48 2.52 2.87 Size V M12 x 1,75 M12 x 1,75 M12 x 1,75 M12 x 1,75 M12 x 1,75 M16 x 2 HCR-50-150 ton HCR-200-00 ton The collar thread length is designed for the full rated cylinder capacity. Minimum Depth Z 0.98 No. of Holes 2 2 2 Angle Coupler 90 90 90 SELECTION CHART AND DETAILS OF 50 00-TON HCR-MODELS For 400 1000-ton models, see pages 12-1. For full product features see pages 2- Stroke * Maximum at Efective Area Oil (in 2 ) (in ) HCR-502 HCR-504 2.96 47.9 50 HCR-506 71.89 62 12.17 HCR-508 95.86 HCR-5010 HCR-5012 HCR-1002 HCR-1004 119.82 14.78 4.67 87.5 100 HCR-1006 11.02 11 22.19 HCR-1008 174.70 HCR-10010 HCR-10012 HCR-1502 HCR-1504 218.7 262.05 65.24 10.48 150 HCR-1506 195.7 168.14 HCR-1508 260.97 HCR-15010 HCR-15012 HCR-2002 HCR-2004 26.21 91.45 86.51 17.02 200 HCR-2006 259.5 22 4.95 HCR-2008 46.04 HCR-20010 HCR-20012 HCR-2502 HCR-2504 42.55 519.06 110.77 221.55 250 HCR-2506 2.2 286 56.27 HCR-2508 44.09 HCR-25010 HCR-25012 HCR-002 HCR-004 55.87 664.64 12.4 264.68 00 HCR-006 97.02 41 67.2 HCR-008 529.6 HCR-0010 HCR-0012 661.71 794.05 * 1500- and 2000-ton models and additional stroke lengths available on request. A 7.20 9.17 11.14 1.62 15.59 17.56 7.95 9.92 11.89 14.92 16.89 18.86 8.66 10.6 12.60 15.6 17.60 19.57 9.09 11.06 1.0 16.06 18.0 20.00 9.49 11.46 1.4 16.97 18.94 20.91 11.65 1.62 15.59 17.56 19.5 21.50 10 www.enerpac.com

Double-Acting, High-Tonnage s : 50-00 ton Stroke: - inch Maximum Operating Pressure: HCR Series CATG-Series Tilt Extended B 9.17 1.11 17.05 21.50 25.4 29.7 9.92 1.86 17.80 22.80 26.7 0.67 10.6 14.57 18.50 2.50 27.44 1.8 11.06 15.00 18.94 2 2 1.81 11.46 15.9 19. 24.84 28.78 2.72 1.62 17.56 21.50 25.4 29.7.1 Outside D Bore E F Base to Advance Port H 5.12 2.76 1.50 6.89 5.1.74 1.50 8.46 6.50 4.72 1.61 7.48 5.51 1.85 11.02 8.46 6.69 2.09 12.01 9.25 2.28 Top to Retract Port I 1.77 2.17 2.56.15 2.76.54.11.82.11 4.09.98 Standard J Protrusion K 0.12 2.95 0.12.70 0.12 4.45 0.12 5.71 0.16 6.97 0.16 Wt. (lbs) 7 46 54 68 76 84 74 90 105 11 146 161 124 148 172 209 2 257 179 212 244 06 8 71 26 279 22 407 457 500 50 404 458 512 566 620 * HCR-502 HCR-504 HCR-506 HCR-508 HCR-5010 HCR-5012 HCR-1002 HCR-1004 HCR-1006 HCR-1008 HCR-10010 HCR-10012 HCR-1502 HCR-1504 HCR-1506 HCR-1508 HCR-15010 HCR-15012 HCR-2002 HCR-2004 HCR-2006 HCR-2008 HCR-20010 HCR-20012 HCR-2502 HCR-2504 HCR-2506 HCR-2508 HCR-25010 HCR-25012 HCR-002 HCR-004 HCR-006 HCR-008 HCR-0010 HCR-0012 Optional Tilt J1 K1 0.94 2.87 1.14.57 1.22 4.64 1.7 5.67 1.85 6.0 2.51 CATG-50 CATG-100 CATG-150 CATG-200 CATG-250 CATG-00 11

HCR-Series, High-Tonnage s HCR-Series, Double-Acting s Fast advance and retract 10% side-load resistance over full stroke Hardened surface resists side-loading and cyclic wear Weather protected, inside and out pper and lower replaceable bearings enclose the cylinder plunger for support throughout the stroke Certified lifting eyes, base mounting holes and collar threads W I X SELECTION CHART AND DETAILS OF 400 1000-TON HCR-MODELS For 50 00-ton models, see pages 10-11. For full product features see pages 2-. Collar / HCR-400 HCR-500 HCR-600 HCR-800 HCR-1000 / HCR-400 HCR-500 HCR-600 HCR-800 HCR-1000 Size W M50 x M400 x 4 M40 x 4 M505 x 5 M570 x 5 Base Mounting Holes Bolt Circle 1.9 14.57 17.2 19.69 Length X.27.54 4.80 5.9 Size V M16 x 2 M24 x M24 x M24 x M24 x The collar thread length is designed for the full rated cylinder capacity. Min. Depth Z 0.98 of Holes Angle Coupler Stroke * Maximum at Efective Area Oil (in 2 ) (in ) HCR-4002 HCR-4004 174.70 49.9 400 HCR-4006 524.09 450 88.75 HCR-4008 698.79 HCR-40010 HCR-40012 HCR-5002 HCR-5004 87.49 1,048.18 222.92 445.85 500 HCR-5006 668.77 575 11.25 HCR-5008 891.70 HCR-50010 HCR-50012 HCR-6002 HCR-6004 1,114.62 1,7.55 260.97 521.94 600 HCR-6006 782.90 67 12.57 HCR-6008 1,04.87 HCR-60010 HCR-60012 HCR-8002 HCR-8004 1,04.84 1,565.81 55.21 710.41 800 HCR-8006 1,065.62 916 180.44 HCR-8008 1,420.82 HCR-80010 HCR-80012 HCR-10002 HCR-10004 1,776.0 2,11.24 46 927.88 1000 HCR-10006 1,91.8 1196 25.68 HCR-10008 1,855.77 HCR-100010 HCR-100012 2,19.71 2,78.65 * 1500- and 2000-ton models and additional stroke lengths available on request. A 12.64 14.61 16.57 18.54 20.51 22.48 1.54 15.51 17.48 19.45 2 2.9 1.86 15.8 17.80 19.76 21.7 2.70 1 1 1 21.81 2.78 25.75 17.40 19.7 21.4 2.1 25.28 27.24 12 www.enerpac.com

Double-Acting, High-Tonnage s HCR Series The superlifting and launch of a 4.000-ton floating oil production system in Malaysia for the Gumusut-Kakap offshore field has set high benchmarks for safety through its use of sophisticated EVO-Series synchronous hydraulics to lift, balance, weigh and smoothly launch massive resources structures. : 400-1000 ton Stroke: - inch Maximum Operating Pressure: CATG-Series Tilt Extended B 14.61 18.54 22.48 26.42 0.5 4.29 15.51 19.45 2.9 27.2 1.26 5.20 15.8 19.76 2.70 27.64 1.57 5.51 1 21.81 25.75 29.69.62 7.56 19.7 2.1 27.24 1.18 5.12 9.06 Outside Bore Base to Advance Port Top to Retract Port Standard Protrusion K Wt. * HCR-4002 HCR-4004 HCR-4006 HCR-4008 HCR-40010 HCR-40012 HCR-5002 HCR-5004 HCR-5006 HCR-5008 HCR-50010 HCR-50012 HCR-6002 HCR-6004 HCR-6006 HCR-6008 HCR-60010 HCR-60012 HCR-8002 HCR-8004 HCR-8006 HCR-8008 HCR-80010 HCR-80012 HCR-10002 HCR-10004 HCR-10006 HCR-10008 HCR-100010 HCR-100012 Optional Tilt D E F H I J (lbs) J1 K1 501 570 1.78 10.6 8.66 2.91 4.7 7.72 0.16 68 7.59 2.2 15.75 12.01.11 4.76 8.98 0.16 887 977 8.98 2.48 1,067 1,158 86 940 16.9 12.99 10.6.5 4.76 9.72 0.16 1,044 1,148 9.47.08 1,252 1,56 1,40 1,485 19.88 15.16 12.60 5.6 11.69 0.16 1,61 1,777 11.28.41 1,922 2,068 1,858 2,01 22.44 17.2 1.9 4.49 6.02 12.72 0.16 2,205 2,79 12.26.65 2,552 2,726 707 775 84 706 797 CATG-400 CATG-500 CATG-600 CATG-800 CATG-1000 1

HCL-Series, Lock Nut s HCL-Series, Single-Acting, Gravity-Return s Lock nut provides positive and safe mechanical load holding Low friction to easily spin the load locking rings 10% side-load resistance over full stroke Hardened surface resists side-loading and cyclic wear Overflow port as stroke limiter to prevent plunger blow-out Weather protected, inside and out Replaceable bearings enclose the plunger for support throughout the stroke Certified lifting eyes and base mounting holes SELECTION CHART 50 00-TON HCL-MODELS For 400 1000-ton models, see pages 16-17. For full product features see pages 2-. S Base Mounting Holes / HCL-50 HCL-100 HCL-150 HCL-200 HCL-250 HCL-00 Bolt Circle 4.1 7.28 8.46 9.65 10.24 Size V M8X1.25 M12X1.75 M12X1.75 M12X1.75 M12X1.75 M16X2 HCL-50-150 ton HCL-200-00 ton Minimum Depth Z 0.9 0.67 0.98 of Holes 2 2 2 Angle Coupler 90 90 90 Stroke * Maximum at Efective Area Oil (in 2 ) (in ) HCL-502 HCL-504 2.96 47.9 50 HCL-506 71.89 62 12.17 HCL-508 95.86 HCL-5010 HCL-5012 HCL-1002 HCL-1004 119.82 14.78 4.67 87.5 100 HCL-1006 11.02 11 22.19 HCL-1008 174.70 HCL-10010 HCL-10012 HCL-1502 HCL-1504 218.7 262.05 65.24 10.48 150 HCL-1506 195.7 168.14 HCL-1508 260.97 HCL-15010 HCL-15012 HCL-2002 HCL-2004 26.21 91.45 86.51 17.02 200 HCL-2006 259.5 22 4.95 HCL-2008 46.04 HCL-20010 HCL-20012 HCL-2502 HCL-2504 42.55 519.06 110.77 221.55 250 HCL-2506 2.2 286 56.27 HCL-2508 44.09 HCL-25010 HCL-25012 HCL-002 HCL-004 55.87 664.64 12.4 264.68 00 HCL-006 97.02 41 67.2 HCL-008 529.6 HCL-0010 HCL-0012 661.71 794.05 * 1500- and 2000-ton models and additional stroke lengths available on request. A 6.46 8.4 10.9 12.6 14. 16.0 7.6 9. 11.0 1.27 15.24 17.20 8.2 10.20 12.17 14.1 16.10 18.07 9.7 11.4 1.1 15.28 17.24 19.21 9.80 11.77 1.74 15.71 17.68 19.65 10.94 12.91 14.88 16.85 18.82 20.79 14 www.enerpac.com

Single-Acting, High-Tonnage Lock Nut s : 50-00 ton Stroke: - inch Maximum Operating Pressure: HCL Series Extended B 8.4 12.6 16.0 20.24 24.17 28.11 9. 1.27 17.20 21.14 25.08 29.02 10.20 14.1 18.07 22.01 25.94 29.88 11.4 15.28 19.21 2.15 27.09 1.02 11.77 15.71 19.65 2.58 27.52 1.46 12.91 16.85 20.79 24.72 28.66 2.60 Outside Bore Base to Advance Port Standard Protrusion K Lock Nut Wt. * HCL-502 HCL-504 HCL-506 HCL-508 HCL-5010 HCL-5012 HCL-1002 HCL-1004 HCL-1006 HCL-1008 HCL-10010 HCL-10012 HCL-1502 HCL-1504 HCL-1506 HCL-1508 HCL-15010 HCL-15012 HCL-2002 HCL-2004 HCL-2006 HCL-2008 HCL-20010 HCL-20012 HCL-2502 HCL-2504 HCL-2506 HCL-2508 HCL-25010 HCL-25012 HCL-002 HCL-004 HCL-006 HCL-008 HCL-0010 HCL-0012 CAT-Series Tilt Optional Tilt D E F H J S J1 K1 (lbs) 7 48 5.12 Tr 100 x 4 0.94 2.80 0.08 0.98 60 2.80 0.9 CAT-100 6.89 5.1 Tr 15 x 6 1.0 2.80 0.08 1.0 118 19 2.80 0.9 CAT-100 160 181 10 161 8.46 6.50 Tr 165 x 6 1.61 5.12 0.08 1.57 192 224 5.12 0.76 CAT-200 255 287 188 21 7.48 Tr 190 x 6 1.85 5.12 0.08 1.77 27 16 5.12 0.76 CAT-200 58 401 262 16 11.02 8.46 Tr 215 x 6 2.09 0.08 2.05 69 422 0.76 CAT-250 476 529 48 411 12.01 9.25 Tr 25 x 6 2.28 5.49 0.08 2.20 474 57 7.68 2.86 CAT-00 601 664 71 8 94 77 98 15

HCL-Series, Lock Nut s HCL-Series, Single-Acting, Gravity-Return s Lock nut provides positive and safe mechanical load holding Low friction to easily spin the load locking rings 10% side-load resistance over full stroke Hardened surface resists side-loading and cyclic wear Overflow port as stroke limiter to prevent plunger blow-out Weather protected, inside and out Replaceable bearings enclose the plunger for support throughout the stroke Certified lifting eyes and base mounting holes SELECTION CHART 400 1000-TON HCL-MODELS For 50 00-ton models, see pages 14-15. For full product features see pages 2- S Base Mounting Holes / HCL-400 HCL-500 HCL-600 HCL-800 HCL-1000 Bolt Circle 1.9 14.57 17.2 19.69 Size V M16 x 2 M24 x M24 x M24 x M24 x Minimum Depth Z 0.95 of Holes Angle Coupler Stroke * Maximum at Efective Area Oil (in 2 ) (in ) HCL-4002 HCL-4004 174.70 49.9 400 HCL-4006 524.09 450 88.75 HCL-4008 698.79 HCL-40010 HCL-40012 HCL-5002 HCL-5004 87.49 1,048.18 222.92 445.85 500 HCL-5006 668.77 575 11.25 HCL-5008 891.70 HCL-50010 HCL-50012 HCL-6002 HCL-6004 1,114.62 1,7.55 260.97 521.94 600 HCL-6006 782.90 67 12.57 HCL-6008 1,04.87 HCL-60010 HCL-60012 HCL-8002 HCL-8004 1,04.84 1,565.81 55.21 710.41 800 HCL-8006 1,065.62 916 180.44 HCL-8008 1,420.82 HCL-80010 HCL-80012 HCL-10002 HCL-10004 1,776.0 2,11.24 46 927.88 1000 HCL-10006 1,91.8 1196 25.68 HCL-10008 1,855.77 HCL-100010 HCL-100012 2,19.71 2,78.65 * 1500- and 2000-ton models and additional stroke lengths available on request. A 12.48 14.45 16.42 18.9 20.5 22.2 14.06 16.02 17.99 19.96 21.9 2.90 14.96 16.9 18.90 2 22.8 24.80 16.9 18.90 2 22.8 24.80 26.77 19.06 21.02 22.99 24.96 26.9 28.90 16 www.enerpac.com

Single-Acting, High-Tonnage Lock Nut s HCL Series Heavy lifting and foundation levelling. The lock nut provides mechanical load holding over a long period of time. : 400-1000 ton Stroke: - inch Maximum Operating Pressure: CAT-Series Tilt Extended B 14.45 18.9 22.2 26.26 0.20 4.1 16.02 19.96 2.90 27.8 1.77 5.71 16.9 2 24.80 28.74 2.68 6.61 18.90 22.8 26.77 0.71 4.65 8.58 21.02 24.96 28.90 2.8 6.77 40.71 Outside Bore Base to Advance Port Standard Protrusion K Lock Nut * HCL-4002 HCL-4004 HCL-4006 HCL-4008 HCL-40010 HCL-40012 HCL-5002 HCL-5004 HCL-5006 Optional Tilt 15.75 12.01 Tr 05 x 6 2.95 7.06 0.20 2.8 1,077 1,186 1,294 942 1,067 HCL-5008 HCL-50010 HCL-50012 HCL-6002 HCL-6004.57 16.9 12.99 Tr 0 x 6.19 7.65 0.20.15 1,19 HCL-6006 1,19 HCL-6008 10.8.89 1,444 1,570 1,472 1,646 HCL-60010 HCL-60012 HCL-8002 HCL-8004 19.88 15.16 Tr 85 x 6.74 8.8 0.20.54 1,819 HCL-8006 1,992 HCL-8008 12.60 4.89 2,166 2,9 2,115 2,5 HCL-80010 HCL-80012 HCL-10002 HCL-10004 22.44 17.2 Tr 440 x 6 4. 9.81 0.20 4.1 2,556 HCL-10006 2,777 HCL-10008 14.17 5.6 2,998,219 HCL-100010 HCL-100012 Wt. D E F H J S (lbs) J1 K1 520 60 1.78 10.6 Tr 270 x 6 2.64 6.27 0.20 2.56 686 8.86.4 770 85 96 751 860 968 CAT-400 CAT-500 CAT-600 CAT-800 CAT-1000 17

LPL-Series, Low-height Lock Nut s LPL-Series, Low-height Lock Nut s The Lowest Power Lifter Integrated Tilt s All LPL-Series cylinders include integral tilt saddles with maximum tilt angles up to 5. The Summit Edition Innovation is at the heart of the new Summit Edition cylinders, delivering the high-quality construction that you expect Enerpac. Their durability ensures your job is done safely and reliably. Lock nut provides mechanical load holding for a safe work environment Integrated tilt saddle allows for up to 5 degrees of misalignment Extreme low-height for use in confined areas 10% side-load resistance over full stroke Overflow port as stroke limiter to prevent plunger blow-out Single-acting, gravity-return Only the extreme low-height LPL-cylinder fits in this confined area to lift the construction. The lock nut provides positive and safe mechanical load holding over a long period of time. Replaceable plunger support bearing adds support for eccentric loads * Nitrocarburization surface treatment for improved load and wear resistance and corrosion protection Replaceable composite bearing surrounds the seal, providing support for eccentric loads Low-wear, high-pressure seals provide longer service life. * Eccentric load (or side-load ) is inevitable in heavy lifting. Enerpac's unique Summit Edition features provide the ultimate protection against side load. Increased bearing surface maintains stability, and nitrocarburization treatment prevents scoring on the inside of the cylinder. Side-load poses a real problem... our new cylinder features are the solution! Stroke Maximum at Effective Area (in 2 ) 60 100 150 200 250 400 500 1.77 1.77 1.77 1.77 1.77 LPL-602 LPL-1002 LPL-1602 LPL-2002 LPL-2502 LPL-4002 LPL-5002 68 11 179 22 286 450 575 22.19 5.18 4.95 56.27 88.75 11.25 18 www.enerpac.com

Single-Acting, Low-height Lock Nut s IMPORTANT! All LPL-Series cylinders require a solid lifting surface for correct support. The use of these cylinders on surfaces such as sand, mud or dirt, may result in cylinder damage. LPL Series INCORRECT! Rough soil CORRECT! Flat lifting surface : 60-500 ton Stroke: 1.77 - inch Maximum Operating Pressure: For more safety instructions see our Learning Center on www.enerpac.com Longer Stroke Lock Nut s For longer stroke applications HCL-Series lock nut cylinders are the perfect choice. 4 Split-Flow Pumps 90 R SFP-Series pumps with multiple outlets with equal oil flow. For lifting and lowering applications on multiple points these pumps are a far better alternative than using separately operated pumps. H S F J E D K A B Synchronous Lifting Systems Pumps for multiple lift-point capabilities. The economical EVOB-Series for basic applications and the multifunctional EVO-Series lifting system. 20 20 Oil (in ) A Extended B Outside D Bore E F Base to Advance Port H J Protrusion K Max. Tilt Angle R (degrees) Lock Nut S Wt. (lbs) 26.4 4.7 62. 77.9 99.7 157.2 200.6 4.94 5.9 5.8 6.10 6.24 7.01 7.56 6.91 7.6 7.60 8.01 8.78 9. 5.51 6.81 8.66 9.65 10.8 1.78 15.75 4.1 5.1 6.69 7.48 8.46 10.6 12.01 Tr 105 x 4 Tr 15 x 6 Tr 170 x 6 Tr 190 x 6 Tr 215 x 6 Tr 270 x 6 Tr 05 x 6 0.75 0.8 1.06 1.18 1.26 1.56 1.91.78 4.96 6.0 7.09 1 0.26 0.1 0.5 0.9 0.45 0.45 0.9 5 5 5 5 5 4 1.10 1.22 1.57 1.69 1.69 2.17 2.42 54 94 121 155 284 404 LPL-602 LPL-1002 LPL-1602 LPL-2002 LPL-2502 LPL-4002 LPL-5002 19

Heavy Lifting Powered by Enerpac Controlled Hydraulic Movement At Enerpac, we specialize in designing high-pressure hydraulic systems required for the controlled movement of large, heavy structures. Powerpacks for lifting applications Around the world, construction experts consult with Enerpac to develop integrated hydraulic solutions for the relocation, positioning, raising and lowering of structures such as bridges, tunnels, buildings, ship modules and platforms. Together, with your engineers and our hydraulic experience, we can develop the innovative solutions you need for the controlled hydraulic movement of those large, heavy burdens. Heavy Lifting Technology Synchronous Lifting Systems Jack-p Systems Bridge Launching Systems Synchronous Hoisting Systems Telescopic Hydraulic Gantries Heavy-Lifting Strand Jacks Skidding Systems Self-Erecting Towers Chain Pulling Systems Self-Propelled Modular Transporter SFP-Series Split-flow pumps distribute an equal amount of hydraulic oil to a maximum of six outlets. Smart-valve technology allows controlled lifting and lowering of heavy loads. Assisted Return Pumps To improve productivity and plunger retraction, Enerpac offers assisted return on Z4 and ZE-Series pumps featuring Enerpac Venturi valve technology, specifically to facilitate the faster return of single-acting, gravity-return cylinders. See enerpac.com for details. EVOB-Series Basic PLC-controlled lifting systems using stroke sensors signals for synchronized lifting and lowering of multiple lifting points. Depending on model, this pump can control 4 or 8 lifting points. EVO-Series Multifunctional PLC-controlled lifting systems for up to 12 lifting points. Modular network capability between units to synchronize up to 48 points. Smart-pump technology in combination with stroke and load monitoring per lifting point, provides high accuracy for lifting and lowering applications. Optional: Weighing and center of gravity determination. Enerpac Worldwide Locations For a complete list of addresses see: www.enerpac.com/en/contact-us About Enerpac Enerpac is the leading global provider of high-pressure hydraulic tools and solutions with a broad range of products, local expertise and worldwide distribution network. With a proven track record in a wide range of markets, Enerpac designs and manufactures high-quality tools and solutions for all industrial applications. Enerpac has gained unique experience in delivering hydraulic solutions for the controlled movement and positioning of heavy objects. Enerpac supports your business by offering the right solutions and service to help you get your work done efficiently and safely. Your Enerpac Distributor: www.enerpac.com 714_0016217_EN-S 2017 Enerpac - Subject to change without notice.