01 Product Guide
1.02 COMPANY PROFILE Pacific Hose Flex PRODUCT RANGE 1.03 Complete Range of Pacific Hose Flex Our office and factory is situated in South East Queensland, Australia. Our expertise began 25 years ago, with our management staff diversifying their engineering skills to industrial hose products, hose fittings and expansion joints. Today we have a knowledgeable and professional hose and expansion joint team, with many years of engineering, manufacturing and sales experience. Our assembly, quality control and service, is rated amongst the highest in our industry. Our products are distributed nationally and internationally and can be found in underground mines, power stations, marine and food and chemical industries, steel works, automobiles, instrumentation equipment, armed forces and an almost endless number of fluid and air conveyance applications. For further information, our sales team can be contacted on: Phone: (617) 55934292 Fax: (617) 55934298 Web Address: http://www.hoseflex.com.au Email: phf@hoseflex.com 01 02 PTFE Hose Stainless Steel Interlock Hose Stainless Steel Hose 03 Expansion Joints: Rubber PTFE Stainless 04 05 Fittings Composite Hose Ducting Hose Rubber Hose
1.04 INTRO Design Considerations When Selecting THE RANGE 1.05 Pacif ic Hose Flex PTFE Hose DATABASE FOR PRESSURES All stated burst pressures are static and are measured on samples at ambient temperature from which averages are recorded to create relevant specifications. Proof or test pressures are usually twice working pressure and all burst pressures are conservatively rated to provide a high margin of safety. CHEMICAL RESISTANCE The PTFE hose liner resists all chemicals and solvents except molten alkali metals, Chlorine Trifluoride, and Fluorine Gas. HOSE QUALITY - PRESSURE TESTING OF RANDOM LENGTH HOSE The responsibility rests completely on the purchaser to ensure satisfactory and appropriate testing before supplying hose assemblies for final use. All hose is checked extensively throughout all stages of manufacture, PACIFIC HOSEFLEX products is proof pressure tested in sample random pieces and not in bulk lengths. Bulk testing can be offered on all products but does incur a premium. Please contact our Sales Department. TEMPERATURE AND PRESSURE Whilst PTFE has a working temperature range between -60ºC and +260ºC (dependent upon the grade selected) as with all other types of - hose, increased working temperatures require a reduction in maximum rated working or burst pressure. Whenever excessive flexing, vibration, thermal fluctuations or rapid pressure impulsing is in evidence, further caution should be exercised in reducing the maximum working pressure. ELONGATION AND CONTRACTION At working pressure this falls within the range +2% to -4% (l/8 & 3/16` +0% to -6%) MINIMUM/MAXIMUM CONTINUOUS LENGTHS All PTFE hose is supplied in random lengths, but if special lengths are required please contact your approved distributor or PACIFIC HOSEFLEX Sales Department. SMOOTH BORE Available from 1/8 to 11/4 this is the all purpose industrial hose. Standard or Heavy wall, Single wire or Double wire braid. T1700 The hose is constructed of a smooth inner core of PTFE, impregnated with carbon black to provide conductivity for static discharge. The outer braid is a specially engineered bunch braid construction made of 304 stainless steel. Size 6mm to 32mm working pressure 35000 KPA ( 5000 psi ) TAPE WRAPPED CONVOLUTED HOSE Available from 3/8 to 4 this super flexible convoluted hose is the ideal product for those tight fit applications. One of the most flexible PTFE hoses available in the world. EASYFLEX CONVOLUTED HOSE Available from 1/4 to 2 our extruded convoluted hose is helically formed offering superior flexibility coupled with an easy to clean design. Ideal for the chemical and food industry. REDUCED STATIC A damaging electrostatic charge can build up inside the hose when electrically resistive fluids are being transmitted at very high flow rates (particularly if the PTFE hose assemblies are lengthy). To prevent this a special carbon is mixed with the PTFE to reduce its resistivity. The need for earth conductor braids or wires in the bore of the hose is therefore eliminated. Please contact our Sales Department for advice on when to specify anti-static hose. BS2050:1978 (items 4, 5, 6 and 7 as appropriate) calls for a maximum resistance of 106 ohms/metre hose length on the critical inside surface of the PTFE hose tubing as well as on the outside. Supply Policy Our policy is one of continuous development and the information in this publication should be taken only as a guide for the use of PACIFIC HOSEFLEX PTFE hose. It does not constitute a warranty of any kind, expressed or implied, of our products or their suitability for any particular use. We reserve the right to alter published specifications without prior notice. PACIFIC HOSEFLEX introduces AFX the easy way to order PTFE hose. We here at PACIFIC HOSEFLEX appreciate the problems that can occur when ordering products in both metric and imperial dimensions, that is why we have introduced the AFX part number system. ENCAPSULATED Stainless Steel outer wire braid, helically wound tube. (translucent in appearance). The design eliminates potential entrapment areas, as the helical rounded profile of the hose and non stick properties of the PTFE promotes a self cleaning effect. HYPERLINE HOSE The PTFE inner tube is smooth bore on the inside but convoluted on the outside, to combine the ease of assembly and high flow rates of a smooth bore hose with the flexibility and link resistance of a convoluted hose in one product. BIOFLEX Due to its extremely strong construction, Bioflex has outstanding resistance to temperature, pressure and flexing. APPROVED BRAKE LINES AND ANODIZED ENDS Available in 1/8 (-3) this hose is used in several braking applications in the auto sport market and is finding new applications with OEM Motorcycle manufacturers. Available with an extruded outer cover. GAS QUALITY Available from 1/8 to 13/32 this special gas hose is manufactured specifically for use with Industrial gases. Also available in High Kevlar and stainless steel braid (pictured). Not only do we quote both metric and imperial measurements in all of our specifications but we now assign a part number to each and every product we manufacture. Just state the AFX number and the quantity you require and we will do the rest, it couldn t be simpler. STEAM HOSE Available in 3/16 this product incorporates a Polyester outer braid. A high quality operator friendly hose.
1.06 Smooth Bore PTFE Hose 1.07 T1700 GENERAL PURPOSE Smooth bore hoses Also Available - SAE 10OR14 - IMPERIAL STANDARD AND HEAVY WALL - METRIC STANDARD AND HEAVY WALL - DASH RANGE STANDARD WALL The PTFE hose core is manufactured from PTFE. No pigments or additives are incorporated thus giving the hose liner a translucent appearance free from any contamination. The wire braiding (1 or 2 wire available) is produced from AISI 304/S15 or BS970 1970 quality hard drawn tensile stainless steel wire. Reduced static versions of all hoses are available for applications where electrically resistive fluids are being transferred at high flow rates. The standard wall products are not recommended for steam-cold water cycling. We recommend the Heavy Wall range for the most demanding applications including intense thermal cycling. All figures stated are for 1 wire braid hose - 2 wire braid hose specifications are available upon request. SMOOTH BORE HOSE All of the hoses in the following range are fully approved to the SAE specification and are available from Pacific Hoseflex today. We feel that this will become the global size range for PTFE hoses and recommend that your smooth bore hose demands are selected from this range. If the coupling size restricts your choice we have three further ranges of smooth bore hoses for you to select the exact size that best suits your requirement. 35000 KPA Working T1700 is virtually resistant to all chemicals except molten alkali metals or halogens at elevated temperatures, which can range from -70º C to +260º C. The hose has excellent mechanical resistance for vibration and flexing and is non-stick and easy to clean. FDA has approved resin that guarantees food, cosmetic and pharmaceutical applications. It is non-flammable, non-aging and has very good U.V. resistance. The hose is chemically inert and has good dielectric properties and low coefficient of friction, which ensures low-pressure drop. Size Average ID Inch mm Average OD Inch mm Operating Min Burst * Room Temp. Psi Bar Psi Bar Bend Radius Inch mm Lbs/Ft. Weight Kg/M AFX Size/ Description Internal Diameter Wall Outside Diameter Maximum* * Maximum Thickness Maximum Bend Radius Working Burst 1/4.222 5.63.375 9.52 5,000 345 16,000 1,104 1.5 38.10.108.161 T1700.04 3/8.308 7.82.473 12.01 5,000 345 16,000 1,104 2.5 63.50.180.260 T1700.06 1/2.401 10.18.600 15.24 5,000 345 16,000 1,104 2.9 73.66.240.357 T1700.08 5/8.495 12.57.710 18.03 5,000 345 16,000 1,104 3.3 83.82.324.482 T1700.10 3/4.617 15.67.970 24.64 5,000 345 16,000 1,104 4.0 101.60.660.982 T1700.12 1.867 22.02 1.25031.75 5,000 345 16,000 1,104 5.0 127.00 1.020 1.520 T1700.16 1-1/4 1.12528.58 1.60040.64 4,000 276 16,000 1,104 12.0 304.80 1.680 2.900 T1700.20 1-1/2 1.38 34.93 1.92 48.77 4,000 276 16,000 1,104 14.1 360 1.98 3.4 T1700.24 mm inch mm inch mm inch mm inch mm inch mm inch psi bar psi bar 14003 DASH 3 3.3 0.130 3.5 0.138 0.76 0.030 5.84 0.230 6.35 0.250 38 1.5 1500 103 12000 828 14004 DASH 4 4.64 0.183 5.2 0.205 0.76 0.030 7.32 0.288 8.2 0.324 51 2 1500 103 10000 690 14005 DASH 5 6.17 0.243 6.73 0.265 0.76 0.030 8.92 0.351 9.47 0.373 76 3 1500 103 9000 621 14006 DASH 6 7.54 0.297 8.38 0.330 0.76 0.030 10.36 0.408 11.63 0.456 102 4 1500 103 8000 552 14007 DASH 7 9.27 0.365 9.77 0.385 0.76 0.030 12.2 0.480 13.21 0.520 127 5 1500 103 7000 483 14008 DASH 8 10.08 0.397 10.85 0.427 0.76 0.030 13.03 0.513 14.19 0.559 133 5.25 1000 69 6000 414 14010 DASH 10 12.42 0.489 13.18 0.519 0.76 0.030 15.44 0.608 16.71 0.658 165 6.5 800 55 6000 414 14012 DASH 12 15.36 0.605 16.38 0.645 0.76 0.030 18.74 0.738 20.02 0.788 197 7.75 800 55 5000 345 14014 DASH 14 18.61 0.733 19.38 0.763 0.89 0.035 21.59 0.850 22.86 0.900 229 9 800 55 4000 276 14016 DASH 16 21.46 0.845 23.00 0.905 0.89 0.035 24.60 0.970 26.90 1.061 229 9 800 55 3500 241 14018 DASH 18 24.63 0.970 26.16 1.030 0.89 0.035 27.80 1.095 29.85 1.175 305 12 800 55 3500 241 14020 DASH 20 27.80 1.095 28.34 1.155 1.14 0.045 31.95 1.258 33.50 1.320 406 16 600 41 2500 172 * Please note that Hoseflex meets and exceeds the stated working and burst pressure values of the SAE specification. * Please note all pressures stated are static
1.08 Tape Wrapped Convoluted Hose 1.09 Easyflex Convoluted Hose Constructed using a helical Tape Wrapped convoluted PTFE and then stainless steel overbraids. Combining extreme flexibility of application, corrosion resistance, long-term durability and chemical inertness, this hose can be used in many diverse applications. Chemical transfers, food handling, and various processing applications, from pure water to hazardous waste. This cost effective hose can replace existing nylon, rubber, metal hose or solid piping and tubing. EASYFLEX Convoluted hose Easyflex was developed to simplify the assembly of convoluted PTFE hose using standard hydraulic fitting. The tube is manufactured in a seamless, extruded convoluted PTFE. This process allows the manufacture of maximum lengths of 60 meters and gives control over Product quality. When you have an application restricted by space, Pacific Hoseflex Easyflex hose is the ideal solution. Tape Wrapped Convoluted Hose assemblies are also highly resistant to the demands of thermal cycling in laundries, rubber and plastic moulding and other types of steam service characterised by frequent on/off cycles which cause wide temperature extremes and thermal shock within a hose. Not recommended for steam - coldwater cycling applications. Steam, 200 psi at +200ºC maximum. High Tape Wrapped Convoluted Hose Constructed with a Tape Wrapped helical convoluted PTFE inner core, with a stainless steel braid, plus a spiral wire beneath the braid to add vacuum strength. High Vacuum Tape Wrapped Convoluted Hose Size/ Description Internal Diameter Wall Outside Diameter Maximum* Maximum Thickness Maximum Bend Radius Working Burst mm inch mm inch mm inch mm inch mm inch mm inch bar psi bar * 8004 1/4 EASY 6.73 0.265 7.49 0.295 0.76 0.030 11.94 0.470 12.70 0.500 17.8 0.700 172 2500 517 7500 FLEX(1WB) 8006 3/8 9.14 0.360 9.91 0.390 0.76 0.030 14.73 0.580 15.75 0.620 20.3 0.800 138 2000 414 6000 psi AFX Internal Diameter Outside Diameter Bend Radius Maximum working Burst inch mm inch mm inch mm psi bar psi bar 8008 1/2 12.45 0.490 13.21 0.520 0.89 0.035 18.29 0.720 19.30 0.760 25.4 1.000 103 1500 310 4500 8010 5/8 15.37 0.605 16.38 0.645 0.89 0.035 21.59 0.850 22.61 0.890 50.8 2.000 83 1200 248 3600 8012 3/4 18.54 0.730 19.56 0.770 0.89 0.035 24.00 0.945 25.27 0.995 63.5 2.500 69 1000 207 3000 9824HV 1 1 2 38.10 1.850 46.99 7.5 190 750 52 3000 207 9832HV 2 50.80 2.420 61.47 10 254 500 34 2000 138 9848HV 3 76.20 3.68 93.47 15 381 250 17 1000 69 9846HV 4 101.60 4.85 123.19 24 610 150 10 600 41 AFX Internal Diameter Outside Diameter Bend Radius Maximum working Burst inch mm inch mm inch mm psi bar psi bar 8014 7/8 21.84 0.860 22.86 0.900 0.89 0.035 27.94 1.100 29.46 1.160 76.2 3.000 57 830 172 2500 8016 1 24.89 0.980 26.16 1.030 1.02 0.040 32.13 1.265 33.66 1.325 88.9 3.500 46 667 138 2000 8020 1 1/4 31.00 1.220 33.00 1.299 1.02 0.040 39.00 1.535 42.00 1.654 88.9 3.500 34 500 103 1500 8024 1 1/2 37.50 1.476 40.50 1.594 1.02 0.040 46.99 1.850 49.20 1.937 152.4 6.000 30 435 90 1300 8032 2 48.00 1.890 52.00 2.047 1.09 0.043 58.67 2.310 59.70 2.350 190.5 7.500 23 329 69 1000 9806 3/8* 9.53 0.590 15.62 1.00 25.4 1000 69 4000 276 9808 1/2 12.7 0.755 19.93 1.5 38 1250 86 5000 345 9810 5/8 16.00 0.907 23.03 2 50 1400 96 5600 386 9812 3/4 19.05 1.058 26.67 2.5 63 1100 76 4400 303 9816 1 25.4 1.295 32.25 3 76 870 60 4000 276 9820 11/4 31.75 1.566 39.88 3.5 88.9 870 60 4000 276 9824 1 1/2 38.10 1.810 45.97 4.5 114 750 52 3000 207 9832 2 50.80 2.32 58.93 5.25 133 500 34 2000 135
1.10 Encapsulated 1.11 Hyperline Hose Construction: A helically convoluted PTFE (polytetrafluorethylene) inner tube, medium wall, with an outer cover of AISI 304 high tensile stainless steel braid. Properties: The hose is virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures. It is non-stick and easy to clean with a temperature range of -70º C to +260º C. The mechanical resistance for vibrations and flexing is excellent. The product is chemically inert, nonageing and has a very good U.V. resistance. The low co-efficiency of friction ensures low pressure drop. It is non-flammable and FDA. approved for food, cosmetic and pharmaceutical applications. Hyperline is unlike any other PTFE hose product currently available. The PTFE liner tube is smooth bore on the inside but convoluted on the outside, to combine the ease of assembly and high flow rates of a smooth bore hose with the flexibility and kink resistance of a Hyperline FX in one product. Full vacuum resistance SS Braided Hyperline FX hose is vacuum resistant up to 130 C Typical Applications: Encapsulated PTFE is recommended on all tafted flange assemblies when pressure or vacuum are applied. Size D1 D2 D3 R WP BP Vacuum Weight REF VIRGIN min max mm min max mm Bar 20 ºc mbar20 ºc gr/m REF anti-static 1 4 5.5 6.9 0.76 11.4 13.3 25 35 170 744 80 TCMB1006 TCAMB1006 Hyperline is available in the following grades: Hyperline FX TO Hyperline FX AS, TO Hyperline FX SS Hyperline FX AS, SS - Natural PTFE Tube Only, no braid. - Anti-Static Black PTFE Tube Only, no braid. - Natural PTFE Tube Only, external 304 Stainless Steel Braid. - Anti-Static Black PTFE Tube 304 Stainless Steel Braid 3/8 8.5 10.5 0.76 14.7 16.5 25 35 170 744 123 TCMB1010 TCAMB1010 1 2 11.6 13.6 0.89 17.9 20.0 25 50 250 887 140 TCMB1012 TCAMB1012 To Special Order, Hyperline FX can also be supplied with a Polypropylene or Kevlar Braid, or with S/S braid with an EPDM or Silicone Rubber Cover, or a PVC, Nylon or other Plastic Cover. 5/8 15.1 16.4 0.89 24.7 25.8 35 35 170 887 160 TCMB1016 TCAMB1016 3 4 19.5 20.5 1.00 28.6 31.4 55 60 290 887 390 TCMB1020 TCAMB1020 1 24.5 25.5 1.10 34.2 38.2 85 40 210 887 540 TCMB1025 TCAMB1025 1 1 4 31.5 32.5 1.15 41.9 46.1 100 45 210 887 680 TCMB1032 TCAMB1032 1 1 2 36.5 37.5 1.45 47.2 49.9 120 40 175 887 1110 TCMB1040 TCAMB1040 1 3 4 44.5 45.5 1.45 55.8 61.4 135 25 135 887 1650 TCMB1045 TCAMB1045 2 49.5 50.5 1.50 60.5 66.7 165 25 135 887 1710 TCMB1050 TCAMB1050 2 1 2 62.5 63.5 1.60 80.9 89.1 230 14 60 887 2140 TCMB1065 TCAMB1065 3 73.5 74.5 1.60 90.4 99.6 260 12 65 887 3310 TCMB1080 TCAMB1080 Specifications (Hyperline FX, SS or FX, AS, SS Only 4 94.5 99.5 1.82 121.1 127.5 400 10 40 887 4050 TCMB1100 TCAMB1100 Actual Hose TO (Tube Only) SS Braid Outside Bend Maximum Working Burst Hose Size *Natural Grade Only Bore Size Outside Dia. Dia. Radius in in mm in mm in mm in mm psi BAR psi BAR 1 4 92-100-04-01-02 0.270 6.8 0.338 8.6 0.378 9.6 3 4 19 1300 88 8000 550 3/8 92-100-06-01-02 0.394 10.0 0.490 12.5 0.534 13.5 1 25 1200 80 7250 500 1 2 92-100-08-01-02 0.536 13.6 0.646 16.4 0.690 17.5 1 1 4 32 900 60 5075 350 5/8 92-100-10-01-02 0.658 16.7 0.788 20.0 0.843 21.4 2 50 750 50 4640 320 3 4 92-100-12-01-02 0.780 19.8 0.938 23.8 0.989 25.1 2 3 8 60 625 42 4350 300 1 92-100-16-01-02 1.039 26.4 1.190 30.0 1.250 31.3 2 7 8 73 580 40 3625 250 * For AS Grades, use 92-110- in place of 92-100-
1.12 Bioflex 1.13 Approved Brake Lines and Anodized Ends Bioflex Technical Information & Product Range Temperature, and Flex-Life - Due to its extremely strong construction, Bioflex has outstanding resistance to temperature, pressure and flexing. In tests, a 1 Bioflex hose was still intact tested at 50 Bar for 100,000 cycles flexed to its minimum bend radius in 2 directions inside an oven heated to 180ºC, where a competitor s convoluted hose failed after just 1,300 cycles. Bioflex Flow Rates Bioflex flow rates are 2-3 times better than convoluted PTFE hose with the same hose bore size, due to non-turbulent flow. BRAKE LINES Pacific Hoseflex has approval to assemble quality brake lines. All hoses are street legal and look extremely neat and professional. The brake lines are constructed with stainless steel braid (with optional PVC tubing cover) and PTFE inner liner which is factory precision crimped to either a zinc plated or stainless steel fitting to eliminate leaking. Approved to FMVSS106 The PTFE inner liner and stainless steel braid eliminates hose expansion common to original factory rubber brake lines which gives a better braking performance. PTFE is the world wide standard of the racing industry for flexible brake, clutch and instrument hoses. Gas Permeability Bioflex has 2-3 times the permeation resistance of standard convoluted hose. Temperature Resistance Depending upon operating conditions and type of braid, Bioflex is usable at temperatures from -70º to +260ºC. Resistance Depending upon operating conditions and type of braid, Bioflex is usable up to 80 Bar (3/8 ) and 30 Bar (2 ). Vacuum Resistance Bioflex is usable at full vacuum up to 130ºC. Above this temperature, vacuum resistance is reduced by 1% per ºC Size Range Bioflex is available in bore sizes from 3/8 to 2 in lengths of up to 20 meters. Ferrule, crimped to secure braid to spigot. Swivel Flange THE BIOFLEX PRODUCT RANGE Bioflex Hose Liners 2 grades of PTFE lined hose liner are available: Bioflex GP (a virgin PTFE liner) and Bioflex AS (an anti-static PTFE liner), both manufactured from FDA approved materials. Bioflex Hose Braids 3 types of Hose Braid are available: Stainless Steel, Polypropylene and Kynar (PVDF). Bioflex External Protection Where additional protection is required, Bioflex is available Rubber Covered, Fireproof Rubber Covered or Silicone Rubber Covered. Alternative protection includes Scuff Rings or a Stainless Steel Protection Coil. Bioflex End Fittings Bioflex is available with a range of integral PTFE lined and flared end fittings including Flanges, DIN 11851, Cam Action, Autolock Cam Action, Triclover, SMS, RJT, RJP. Triclover fittings include a PTFE sealing face which is hot formed to accept the standard Triclover rubber seal (patent protected). ANODIZED ENDS Application: Designed for use on low pressure applications where swivel hose ends are not required or are impractical to use. These clamps give a tidy and professional appearance to any installation. No I.D. O.D. No No Red Mm Mm Blue Chrome 9001-04 6.4 12.7 9001-06 8.8 16 9001-08 11 17.5 9001-10 14.3 22.2 9001-12 17.5 25.4 9001-14 19 28.6 9001-16 23.1 30.2 9001-18 28 34.9 9001-20 32 39.7 9001-24 38.3 42.9 9001-04 9001-06 9001-08 9001-10 9001-12 9001-14 9001-16 9001-18 9001-20 9001-24 9001-04 9001-06 9001-08 9001-10 9001-12 9001-14 9001-16 9001-18 9001-20 9001-24 Spigot, usually with an internal thread which screws onto the convolutions, securing the hose liner to the spigot. Bioflex PTFE Liner Tube: - externally convoluted - smoothbore, with slight ripples - internal surface finish is mirror smooth. generated by hot polishing during manufacture PTFE liner tube extended through the end fitting, then flared out to form the sealing face Steam and Electrical Trace Heating Bioflex is available steam or electrically trace heated, custom built for specific applications. 9001-28 43.7 49.2 9001-32 51 55.6 9001-34 58.7 9001-36 60.3 9001-28 9001-32 9001-34 9001-36 9001-28 9001-32 9001-34 9001-36
1.14 Gas Quality PTFE Hose 1.15 INQUIRY FORM Enquiry data sheet HIGH PRESSURE Gas hose - Charging Lines for Aerosols - Gas Cylinder Charging and Discharging Manifolds - Dehydration Lines - Use on Pure Air Applications such as Thermal Imaging - Breathing Apparatus Technical Information (Hose Specification Sheet) Instructions: To place an order or request a quotation, please complete section I. If you need assistance in specifying an assembly, complete Section II as well as the End Fittings portion of Section I. When completed, Fax: (617) 55 934 298 or Email: phf@hoseflex.com.au this form to Pacific Hoseflex HOSE CONSTRUCTION LINER Manufactured from PTFE 62 specially processed to minimise gas diffusion. Customer: Contact: Date: Phone: Fax: Email: REINFORCEMENT This hose is reinforced with 2 layers of braid. lst BRAID Manufactured from T956 Kevlar Aramid yarn (or equivalent). This provides approximately 80% of the burst strength of the hose. 2nd BRAID Manufactured from 304A/IS1 quality stainless steel wire. Whilst contributing to the burst pressure strength its main function is to provide mechanical strength and to assist in fitting retention. INTERLAYER A single layer of Polyester Film applied between the two layers of braid to prevent the abrasion of the Kevlar by the wire during service. I. Specification Information Request Quote Yes / No circle one Place Order P.O.# Quote ref # Quantity: Date Required: Hose type: Diameter (mm): Length (mm): (Live Length / Overall Length) Circle One End Fittings (type and size for both ends) End #1: Size: Type: Material: End #2: Size: Type: Material: Liner Required: Yes / No Circle One If Yes, Liner Material: Special Fabrication: COVER A continuous extrusion of Hytrel Polyester Elastomer with a minimum thickness of 0.020 (0.5 mm). The cover will be pricked at regular intervals to allow the escape of any diffused gas. Accessories: II. Application Information Application Drawing: (sketch the installation and include all dimensions and motions of hose during application and any other considerations) AFX Size / Internal Diameter Wall Thick Outside Diameter Description Bend Diameter Maximum Maximum Radius inch mm inch mm mm inch Maximum Working Burst mm inch mm inch m inch psi bar psi bar 6304 1/4 GAS KEVLAR 1WB 6.35 0.250 6.86 0.270 1.02 0.040 9.65 0.38 10.67 0.42 76.2 3 8000 552 24000 1655 13/32 GAS 6307 10.03 0.395 10.54 0.415 1.02 0.040 13.84 0.545 14.86 0.585 133 5.25 4500 310 18000 1240 KEVLAR 1WB Size (mm): (in the event the fittings or hose have different sizes, include all sizes and show on the application drawing). Temperature: Media: Min. ºc Max. ºc Environment: Min. ºc Max. ºc (assumption is 21ºc for all) Media: (assumption is the media is compatible with all available materials) Max. (psi): Fluctuations (None / Pulsating / Shock) Circle One (assumption is nominal pressure, no fluctuations) Max. Velocity (feet/second): (assumption is velocity is too slow to affect performance) Type of Motion (from drawing above): (Static / Constant / Vibration) Circle One (assumption is static)
33 Alex Fisher Drive, Burleigh Heads Qld 4220 P.O. Box 2245 Burleigh Heads M.D.C Qld 4220 Australia Ph: (617) 55934292 Fax: (617) 55934298 Email: phf@hoseflex.com.au Web: www.hoseflex.com.au