AZAR LAMP COMPARTMENT CORROSION RESISTANT, WEATHER PROOF COMPACT FLOODLIGHT RANGE Compact corrosion resistant, weather proof flood light with integral gear tray for use with 70W HPS, 70W/150W HQI and 80W MBF lamps. APPLICATION Azar is an ENERGY SAVING floodlight which uses 75% less energy than traditional tungsten halogen lamps with more than five times longer lamp life. Azar is particularly suitable for applications involving long periods of operation i.e. security lighting, flood lighting of buildings, shop signs, restaurants, monuments and car parks. This fitting is highly recommended for the sites near the sea. CONSTRUCTION The construction is made of injection moulded high quality, impact resistant self-coloured black or grey (RAL 7035) polycarbonate. The reflector is of anodized high grade dimpled aluminium to give an efficient wide beam. The protective front cover is toughened glass mounted directly on to the body. The body houses a special gasket to provide degree of protection. ELECTRICAL Ballast and components are mounted on an easy to remove zinc coated steel gear tray. The flood light is provided by a PG 11 compression type cable gland. High temperature silicon insulated conductors are used throughout. MECHANICAL Mounting is via a painted steel bracket, provided. SPECIFICATION Designed in accordance to the following Standards: CEI 34-21, and EN60598-1 70 W HQI - R7S 70 W HPS 70 W MBI - E27 BLACK CODE N GREY ORDERING DATA LAMP LAMP HOLDER WEIGHT KG NX 3610 NX 3650 EMPTY R7S-70 1,80 NX 3640 NX 3680 EMPTY R7S-150 1,80 NX 3620 NX 3660 EMPTY E27 1,80 NX 3631 NX 3671 70 W HPS w/o ignitor E27 3,40 NX 3628 NX 3668 70 W HPS c/w ignitor E27 3,40 NX 3612 NX 3652 70 W HQI R7S 3,50 NX 3642 NX 3682 150 W HQI R7S 3,50 NX 3636 NX 3676 80 W MBF E27 3,40 FLOODLIGHTS AZAR 1 7
ARGOS LAMP COMPARTMENT CORROSION RESISTANT, WEATHER PROOF COMPACT FLOODLIGHT RANGE A highly aesthetic compact corrosion resistant weather proof fitting with integral control gear. Can be used with 70W HPS, 70W/150W HQI, and 80W MBF lamps. APPLICATIONS Particularly suitable for loading areas, building perimeters, precinct areas, building facades, shop signs, and security applications. This is an ENERGY SAVING floodlight which uses 75% less energy than traditional tungsten halogen models, with more than five times longer lamp life. CONSTRUCTION Argos is made of injection moulded, high quality impact resistant self-coloured black or grey (Ral 7035) polycarbonate. The gear compartment is separate from the lamp compartment, thus giving both compartments ingress protection. The symmetric reflector is made of anodised aluminium with a dimpled finish. The toughened glass is mounted inside a polycarbonate frame, which is screwed to the body by means of four stainless steel screws. Weather proofing IP65 ingress protection, is attained by a silicon gasket. ELECTRICAL All electrical components are mounted on an easy to remove injection moulded polycarbonate gear tray. High temperature silicon insulated conductors are used throughout. The wiring is accessed via a PG11 compression type cable gland. SPECIFICATION Designed in accordance to the following Standards: CEI 34-21 and EN60598-1. 70 W HQI - R7S 70 W HPS 70 W MBI - E27 BLACK CODE N GREY ORDERING DATA LAMP LAMP HOLDER WEIGHT KG NX 3809 NX 3880 EMPTY R7S-70 2,00 NX 3801 NX 3891 EMPTY E27 2,00 NX 3802 NX 3882 EMPTY R7S-150 2,00 NX 3803 NX 3893 70 W HPS w/o ignitor E27 3,60 NX 3804 NX 3884 70 W HPS c/w ignitor E27 3,60 NX 3805 NX 3885 70 W HQI R7S-70 3,80 NX 3806 NX 3887 150 W HQI R7S-150 4,70 NX 3808 NX 3889 80 W MBF E27 3,60 FLOODLIGHTS ARGOS 1 9
VELA LAMP COMPARTMENT SYMMETRIC AND ASYMMETRIC CORROSION RESISTANT WEATHER PROOF FLOODLIGHT RANGE Vela is a weather proof and non corrosive floodlight which can accommodate 70W HPS, 70W/150W HQI, 80W MBF, and FLC 2X26 lamps. It may come with both symmetric or asymmetric reflector. APPLICATIONS Vela is suitable for medium and large areas where there is need for a long period or round the clock floodlighting such as: petrolium platforms, large car parks, building sites, sport fields, exhibition halls, general storage and stations. Vela is highly recommended for sites near the sea. CONSTRUCTION Made of injection moulded high quality impact and heat resistant self black coloured polycarbonate. The lamp and control gear compartments are thermally separated. The reflector is made of high purity anodized aluminium in order to maximize light output, and a silicon gasket provides an ingress protection. All external screws are made of stainless steel. ELECTRICAL The control gear box is provided with a cable gland and a 2-way terminal block. High temperature silicon insulated conductors are used throughout. MECHANICAL Mounting is via a heavy gauge steel bracket with an incorporated aiming device. SPECIFICATION Designed in accordance with the following Standards: CEI 34-21 and EN60598-1 150 W MBI SYMMETRIC 70 W MBI ASYMMETRIC ORDERING DATA POLYCARBONATE FLAT GLASS LAMP LAMP HOLDER WEIGHT SYMMETRIC ASYMMETRIC SYMMETRIC ASYMMETRIC NX 3150 NX 3550 NX 3120 NX 3520 EMPTY R7S-70 1,80 NX 3160 NX 3560 NX 3130 NX 3530 EMPTY R7S-150 1,80 NX 3170 NX 3570 NX 3140 NX 3540 EMPTY E27 1,80 NX 3171 NX 3571 NX 3141 NX 3541 70W HPS w/o ignitor E27 3,70 NX 3172 NX 3572 NX 3142 NX 3542 70W HPS c/w ignitor E27 3,80 NX 3151 NX 3551 NX 3121 NX 3521 70W HQI R7S-70 3,80 NX 3161 NX 3561 NX 3131 NX 3531 150W HQI R7S-150 4,80 NX 3173 NX 3573 NX 3143 NX 3543 80W MBF E27 3,80 NX 3174 NX 3574 NX 3144 NX 3544 FLC 2X26 W G24d-3 NX 37003 NX 36003 SPARE PC DIFFUSER / GLASS FLOODLIGHTS VELA 2 1
ALBA LAMP COMPARTMENT SYMMETRIC AND ASYMMETRIC CORROSION RESISTANT WEATHER PROOF FITTING RANGE Alba is a versatile weather proof and non corrosive floodlight that can accommodate 150W/250W/400W/ HPS, 250W/400W MBI and MBF lamps. APPLICATIONS Alba is suitable for medium and large areas where there is need for long period or round the clock floodlighting such as; petrolium platforms, large car parks, building sites, sport fields, exhibition halls, general storage and stations. Alba is highly recommended for sites near the sea. CONSTRUCTION Made of injection moulded high quality impact and heat resistant self black coloured Polycarbonate. The lamp and control gear compartments are thermally separated. An extremely efficient silicon gasket provides ingress protection. The reflector is made of high purity aluminium in order to maximize light output. All external screws are made of stainless steel. ELECTRICAL The control gear box is provided with a cable gland and a 2-way terminal block. High temperature silicon insulated conductors are used throughout. MECHANICAL Mounting is via a painted steel bracket which is provided. ACCESSORIES Wire Guard: A steel wire guard is available to protect the glass cover from impact damage. SPECIFICATION Designed in accordance with the following Standards: CEI 34-21 and EN60598-1 400 W HPS-T 250 W HPS-T symmetric SYMMETRIC ORDERING DATA CODE N LAMP LAMP HOLDER WEIGHT ASYMMETRIC NX 3900 NX 3950 EMPTY E40 4,80 NX 3923 NX 3973 150 W HPS E40 7,60 NX 3924 NX 3974 250 W HPS E40 8,50 NX 3925 NX 3975 400 W HPS E40 8,50 NX 3914 NX 3964 250 W MBI E40 8,50 NX 3915 NX 3965 400 W MBI - 4,20 A. E40 9,70 NX 3949 NX 3999 400 W MBI - 3,40 A. E40 9,70 NX 3933 NX 3983 250 W MBF E40 8,20 NX 3934 NX 3984 400 W MBF E40 9,40 NX 3901 WIRE GUARD 0,50 FLOODLIGHTS ALBA 2 3
ROMA LAMP COMPARTMENT CORROSION RESISTANT WEATHER PROOF FLOODLIGHT RANGE Roma is a weather proof and non corrosive floodlight which can accommodate 150W/250W/400W HPS, 250W/400W MBI and 250W MBF lamps. It may come with either symmetric or asymmetric reflector. APPLICATIONS Roma is suitable for medium and large areas where there is need for a long period or round the clock floodlighting such as: large car parks, building sites, sport fields, exhibition halls, general storage and stations. Roma is highly recommended for sites near the sea. CONSTRUCTION Made of injection moulded high quality impact and heat resistant black coloured polycarbonate. The control gear cover is made of black injection moulded impact and heat resistant polycarbonate. An extremely efficient silicon gasket provides ingress protection. In order to maximize light output a high purity anodized aluminium reflector is used. All external screws are made of stainless steel. ELECTRICAL The control gear box is provided with a cable gland and a 2-way terminal block. High temperature silicon insulated conductors are used throughout. MECHANICAL Mounting is via a heavy gauge painted steel bracket with an incorporated aiming device. ACCESSORIES Wire guard: A steel wire guard is available to protect the glass cover from impact damage. SPECIFICATION Designed in accordance with the following Standards: CEI 34-21, and EN60598-1. 400 W HPS-T 250 W HPS-T symmetric SYMMETRIC ORDERING DATA CODE N LAMP LAMP HOLDER WEIGHT ASYMMETRIC NX 3800 NX 3850 EMPTY E40 4,80 NX 3824 NX 3874 150 W HPS E40 7,60 NX 3814 NX 3864 250 W HPS E40 8,50 NX 3825 NX 3875 400 W HPS E40 8,50 NX 3811 NX 3861 250 W MBI E40 8,50 NX 3815 NX 3865 400 W MBI - 4,20 A E40 9,70 NX 3849 NX 3899 400 W MBI - 3,40 A E40 9,70 NX 3833 NX 3883 250 W MBF E40 8,20 NX 3207 WIRE GUARD 0,50 FLOODLIGHTS ROMA 2 5
TEMPESTA 1 LAMP COMPARTMENT A DIE-CAST ALUMINIUM FLOODLIGHT WITH INTEGRAL CONTROL GEAR RANGE A compact floodlight with integral control gear for use with 70W HPS and 70W/150W HQI lamps. APPLICATIONS For small to medium size applications, this range of ENERY SAVING floodlights use more than 70 % less energy than traditional tungsten halogen models with more than five times longer lamp life. Tempesta 1 is therefore particularly suitable for applications involving long operational periods i.e. security lighting, storage areas, floodlighting of buildings and monuments, and car parks. CONSTRUCTION The body is made of die-cast aluminium finished in durable black paint. The reflector is made of anodized high grade dimpled aluminium to give an efficient wide beam. The front cover is formed of durable glass set into a die-cast aluminium frame. This frame is hinged to the floodlight body to facilitate installation and lamp changing. A silicon rubber sealing gasket provides an ingress degree of protection. All external screws are made of stainless steel. ELECTRICAL The control gear box is provided with a compression type PG 11 cable gland and a 3-way terminal block. The gear tray is made of zinc coated steel sheet. High temperature silicon insulated conductors are used throughout. MECHANICAL Mounting is via a painted galvanized steel bracket. ACCESSORIES Wire guard: A steel wire guard is available to protect the glass cover from impact damage. SPECIFICATION Designed in accordance with the following Standards: CEI 34-21 and EN60598-1 70 W HPS-T 70 W MBI-T 150 W MBI-T CODE N ORDERING DATA LAMP LAMP HOLDER WEIGHT KG NX 4100 E27 Empty E27 3,90 NX 4101 R7S - 70 W Empty R7S-70 3,90 NX 4113 R7S - 150 W Empty R7S-150 3,90 NX 4102 70W HQI R7S 5,50 NX 4103 150W HQI R7S 6,50 NX 4111 70W HPS W/O Ignitor E27 5,60 NX 4112 70W HPS C/W Ignitor E27 5,60 FLOODLIGHTS TEMPESTA 1 2 7
ARIAN 2 LAMP COMPARTMENT A DIE-CAST ALUMINIUM FLOODLIGHT WITH INTEGRAL CONTROL GEAR RANGE A comprehensive range of attractive floodlights with integral control gear for use with 70W HPS and 70W/150W HQI lamps. APPLICATIONS Arian 2 is ideal for small and medium size applications. It has the benefit of being an ENERGY SAVING floodlight, and uses 70% less energy than traditional tungsten models, with more than five times longer lamp life. This makes it an ideal floodlight for applications involving long operation periods such as: security lighting, car parks, storage areas, floodlighting of buildings and monuments. CONSTRUCTION The body and frame are made of die-cast aluminium with an electrostatically applied special metallic grey polyester paint with UV protection, to protect it against corrosion. The reflector is anodized high grade dimpled aluminium which produces an efficient wide beam. The glass is set inside the frame; and the frame is attached to the body via two stainless steel hooks. A silicon rubber sealing gasket provides an ingress protection of. All external clips are made of stainless steel. ELECTRICAL The control gear box is provided with a compression type PG 11 cable gland and a 3-way terminal block. The gear tray is made of zinc coated steel sheet and can be easily accessed. High temperature silicon insulated conductors are used throughout. MECHANICAL A galvanized stirrup helps to easily position the fitting on different types of surfaces. ACCESSORIES Wire guard: A steel wire guard is available to protect the glass cover from impact damage. SPECIFICATION Designed in accordance with the following Standards: CEI 34-21 and EN60598-1. 70 W HPS-T 70 W MBI-T 150 W MBI-T ORDERING DATA CODE N LAMP LAMP HOLDER WEIGHT FLOODLIGHTS ARIAN 2 NX 3040 EMPTY R7s/70 3,50 NX 3050 EMPTY R7s/150 3,50 NX 3060 EMPTY E27 3,50 NX 3222 70 W HQI R7s 5,10 NX 3224 150 W HQI R7s 6,10 NX 3261 70 W HPS w/o ignitor E27 5,20 NX 3262 70 W HPS c/w ignitor E27 5,30 NX 3206 WIRE GUARD 0,50 2 9
MARS 1 LAMP COMPARTMENT DIE CAST ALUMINIUM FLOODLIGHT WITH INTEGRAL CONTROL GEAR RANGE The MARS 1 floodlight incorporates many advanced features, resulting in a product with high reliability and efficiency. Models are available to accommodate 150W/250W/400W HPS, 250W/400W MBI and 250W MBF lamps. APPLICATIONS For medium to large size areas where long duration of round the clock floodlighting is required i.e. sport fields, large car parks, building sites, general storage areas etc. CONSTRUCTION Aesthetically pleasing die-cast aluminium alloy body, incorporating a thermally separated lamp and control gear compartments. The front cover is formed of durable, toughened glass mounted into a die-cast aluminium frame. The body and frame are finished in electrostatically applied black or white polyester paint producing a very durable finish. The control gear cover is made of black injection moulded impact and heat resistant polycarbonate and an extremely efficient silicon gasket provides ingress protection. The gear tray is made of zinc coated steel sheet and the control gear module is easily removable from the gear compartment for an easy maintenance. Lamp changing is via two screws on the frame. The heavy guage steel bracket has an incorporated aiming device. The reflector is made of high purity anodized aluminium in order to maximize light output. All external screws are made of stainless steel. ELECTRICAL The control gear box is provided with a compression type cable gland and a 3-way terminal block. High temperature silicon insulated conductors are used throughout. MECHANICAL Mounting is via a painted steel bracket which is provided. ACCESSORIES Wire guard: A steel wire guard is available to protect the glass cover from impact damage. SPECIFICATION Designed in accordance with the following Standards: CEI 34-21 and EN60598-1. 250 W MBI-T BLACK 400 W MBI-T ORDERING DATA CODE N LAMP LAMP HOLDER WEIGHT POLYCARBONATE FLAT WHITE NX 3110 NX 3111 EMPTY E40 5,30 NX 3324 NX 3364 150 W HPS E40 9,20 NX 3314 NX 3354 250 W HPS E40 10,00 NX 3325 NX 3365 400 W HPS E40 11,70 NX 3311 NX 3351 250 W MBI E40 9,20 NX 3315 NX 3355 400 W MBI - 4,20 A E40 10,00 NX 3349 NX 3389 400 W MBI - 3,40 A E40 10,00 NX 3333 NX 3337 250 W MBF E40 10,40 NX 3302 NX 3304 WIRE GUARD 0,50 FLOODLIGHTS MARS 1 3 1
MARS 2 LAMP COMPARTMENT A HIGH PERFORMANCE DIE CAST ALUMINIUM FITTING WITH INTEGRAL CONTROL GEAR RANGE Mars 2 is a high performance luminaire with a special optical design that gives exceptionally low glare and allows mounting heights up to 10 meters. Suitable for 150W/250W/400W HPS, 250W/400W MBI and 250W MBF lamps. APPLICATIONS For medium to large size areas where long duration of round the clock floodlighting is required, i.e. sport fields, large car parks, building sites, general storage areas etc. CONSTRUCTION The robust construction of Mars 2 is provided by a die-cast aluminium alloy body with two stainless steel hooks which keep the framed toughened glass hinged to the body. The lamp and control gear compartments are thermally separated. The body and frame are finished in a special electrostatically applied metallic grey special polyester paint with UV protection. The control gear cover is made of black injection moulded impact and heat resistant polycarbonate and, an extremely efficient silicon gasket provides ingress protection. The gear tray is made of zinc coated steel sheet and the control gear module is easily removable from the gear compartment for easy maintenance. Tool free entry for lamp change is via two quick release stainless steel clips. The reflector is made of high purity anodized aluminium with a special optical design giving high performance light control. All external clips are made of stainless steel. ELECTRICAL The control gear box is provided with a compression type cable gland and a 3-way terminal block. High temperature silicon insulated conductors are used throughout. MECHANICAL Mounting is via a heavy gauge steel bracket which comes with an incorporated aiming device. ACCESSORIES Wire guard: A steel wire guard is available to protect the glass cover from impact damage. SPECIFICATION Designed in accordance with the following Standards: CEI 34-21 and EN60598-1. 250 W MBI-T 400 W MBI-T ORDERING DATA CODE N LAMP LAMP HOLDER WEIGHT NX 3180 EMPTY E40 5,30 NX 3384 150 W HPS E40 9,20 NX 3394 250 W HPS E40 10,00 NX 3385 400 W HPS E40 12,00 NX 3381 250 W MBI E40 9,20 NX 3395 400 W MBI - 4,20 A E40 10,00 NX 3361 400 W MBI - 3,40 A E40 10,00 NX 3391 250 W MBF E40 10,50 NX 3306 WIRE GUARD 0,50 FLOODLIGHTS MARS 2 3 3
TEMPESTA 2 DIE CAST ALUMINIUM FLOODLIGHT WITH INTEGRAL CONTROL GEAR LAMP COMPARTMENT RANGE The TEMPESTA 2 floodlight incorporates many advanced features, resulting in a product with high reliability and efficiency. Models are available to accommodate 150W/250W/400W HPS, 250W/400W MBI and 250W MBF lamps. APPLICATIONS For medium to large size areas where long duration of round the clock floodlighting is required i.e. sport fields, large car parks, building sites, general storage areas etc. CONSTRUCTION Aesthetically pleasing die-cast aluminium alloy body, incorporating a thermally separated lamp and control gear compartments. The front cover is formed of durable, toughened glass mounted into a die-cast aluminium frame. The body and frame are finished in electrostatically applied black polyester paint producing a very durable finish. The control gear cover is made of black injection moulded impact and heat resistant polycarbonate and, an extremely efficient silicon gasket provides ingress protection. The gear tray is made of zinc coated steel sheet and the control gear module is easily removable from the gear compartment for an easy maintenance. Lamp changing is via two screws on the frame. The heavy guage steel bracket has an incorporated aiming device. The reflector is made of high purity anodized aluminium in order to maximize light output. All external screws are made of stainless steel. ELECTRICAL The control gear box is provided with a compression type cable gland and a 3-way terminal block. High temperature silicon insulated conductors are used throughout. MECHANICAL Mounting is via a painted steel bracket which is provided. ACCESSORIES Wire guard: A steel wire guard is available to protect the glass cover from impact damage. SPECIFICATION Designed in accordance with the following Standards: CEI 34-21 and EN60598-1. 250 W MBI-T CODE N 400 W MBI-T ORDERING DATA LAMP LAMP HOLDER WEIGHT KG NX 4104 E40 Empty E40 5,30 NX 4105 150 W HPS E40 9,20 NX 4106 250 W HPS E40 10,00 NX 4107 400 W HPS E40 11,70 NX 4108 250 W MBI E40 9,20 NX 4114 400 W MBI 4.20 A. E40 10,00 NX 4109 400 W MBI 3.40 A. E40 10,00 NX 4110 250 W MBF E40 10,40 FLOODLIGHTS TEMPESTA 2 3 5
MIRAL DIE CAST ALUMINIUM FLOODLIGHT WITH INTEGRAL CONTROL GEAR SYMMETRIC AND ASYMMETRIC LAMP COMPARTMENT GEAR COMPARTMENT RANGE An exceptionally high quality floodlight suitable for 150W/250W/400W HPS and 250W/400W MBI and 250W MBF lamps. APPLICATION Ideal for car parks, sport halls, building sites, advertising hoardings, loading docks, security, amenity and recreational areas. CONSTRUCTION Miral is made of die cast aluminium alloy. The reflector is made of polished anodized aluminium, and can be provided either symmetric or asymmetric. The toughened front glass is fitted inside a frame which is secured by 6 stainless steel screws to the main body. Both the body and the frame are finished in an electrostatically applied metallic grey special polyster paint with UV protection, that helps prevent against corrosion and produces a very durable finish. An efficient silicon gasket provides an ingress protection. The gear tray is made of zinc coated steel sheet, and can be easily removed for maintenance. The control gear compartment is separated from the lamp enclosure by a thermal barrier. ELECTRICAL High temperature silicon insulated conductors are used throughout. MECHANICAL A galvanized steel bracket with an elevation protractor is hinged to the sides of the fitting for attachment on different kinds of fixed surfaces. ACCESSORIES Wire guard: a steel wire guard is available to protect the glass cover from impact damage. SPECIFICATION Designed in accordance with the following Standards: CEI 34-21 and EN60598-1. 400 W HPS-T 250 W HPS-T symmetric ORDERING DATA CODE N LAMP LAMP HOLDER WEIGHT POLYCARBONATE FLAT SYMMETRIC ASYMMETRIC NX 4900 NX 4950 EMPTY E40 4,80 NX 4924 NX 4974 150 W HPS E40 7,60 NX 4914 NX 4964 250 W HPS E40 8,50 NX 4925 NX 4975 400 W HPS E40 8,50 NX 4911 NX 4961 250 W MBI E40 8,50 NX 4915 NX 4965 400 W MBI - 4,20 A E40 9,70 NX 4949 NX 4999 400 W MBI - 3,40 A E40 9,70 NX 4933 NX 4983 250 W MBF E40 8,20 NX 4907 GREY WIRE GUARD 0,50 FLOODLIGHTS MIRAL 3 7