HYMAX Inground Your workshop in an attractive appearance with 1-piston for washing bay 2-piston lift with lifting arms, lifting platform and runways up to 8t with two different installation variations Hydraulic mechanical 2,20m installation depth ACCURA 1,70m installation depth Hydraulic mechanical cassette with mechanical crossbeam synchronization is ensured by a mechanical connection of the pistons crossbeam ensures synchronization of the piston and has an anti-twist function. Installation depth: 2,50m ACCURA Safety Star Technology telescopic cylinders in singel cassettes with patented SST Safety System optimal for ceiling installation and area with high groundwater lever electronic synchronization through proportional valve technique guarantees safe lifting at any working height Installation depth: 1,70m The lifting piston hydraulic cylinders are integrated in guiding pipe and are treated against corrosion with a chromium coating. hard piping instead of flexible tubes ensures a long-life and low maintenance. by Automotive Testing Technologies GmbH Techn. changes and errors excepted.
HYMAX Inground for washing bay 1-piston lift with external power unit separated control panel can be installed up to 6 m away from the lift Drive technology: hydraulic unit with oilsubmerged motor integrated in cannister a crossbeam secures synchronization and prevents rotation of the platform screwed, corrosion resistant hydraulic pipes from hydraulic unit to the cylinders (no loose flexible hoses) cylinders are protected inside the hard chromed guiding pipes (dm 140 mm) X-lifting arms fire galvanized, 2-times telescopic lifting arms vehicle will be lifted at pick-up points, therefore sillboard is accessible wide range of height adapters available H-lifting platform fire galvanized, lengthwise adjustable lifting platform for picking up vehicle at sillboard fast and simple to drive-on for wide range of vehicles HYMAX Inground 1.35 H X Lifting capacity (kg) 3500 3500 Lifting height (mm) 1975 2064 Lifting/ lowering time (sec.) 40/35 40/35 Piston diameter (mm) 140 140 Arm extraction (mm) 630 1235 Lowest pick-up point (mm) 95 Platform length (mm) 1400 1900 Drive-on height (mm) 60 Total width (mm) 2520 2520 Installation depth (mm) 3 3 Motor (kw) 400/50 400/50 Power supply (V/Hz) 400/50 400/50 HYMAX Inground
HYMAX Inground with lifting arms sillboard remains free flexibility for working at a wide range of vehicles from small cars to vans and off-road vehicles ideal for most of the works around the vehicle: body works, demounting big components, working with vans and small trucks, etc. 2.35 B 2.35 B ACCURA 2.50 B 2.50 B ACCURA STANDARD DG MINI-MAX STANDARD DG MINI-MAX DG DG Lifting capacity (kg) 3500 3500 3500 3500 3200 3500 5000 5000 Lifting height (mm) 2070 2070 2070 2085 2085 2085 1990 2085 Lifting/ lowering time (sec.) 30/30 30/30 30/30 20/20 20/20 20/20 43/32 45/27 Piston diameter (mm) 140 140 140 172, 140 172, 140 172, 140 160 172, 140 Distance between pistons (mm) 2200 2200 2200 variabel variabel variabel 2600 variabel Arms extraction (mm) 595 987 0 1789 595 987 595 1160 0 1789 618 943 0 1790 0 1790 Lowest pick-up point (mm) 83 120 115 190 75 185 115 190 115 190 75 185 115 190 115 190 Installation depth (mm) 2493 2493 2493 1463 1463 1463 2350 1463 Motor (kw) 3 3 3 3 3 3 3 3 Power supply (V/Hz) 400/50 400/50 400/50 400/50 400/50 400/50 400/50 400/50 *1 Mini Max-arm: 75 185mm STANDARD powder coated 2-times telescopic lifting arms with adjustable turntables for passenger cars and small vans MINI MAX suitable for lifting vehicles with low clearance and deepdrawn side skirt: enormous adjustable range of 75 185mm multilevel quick adjustment operation with foot plug on adapter special for passenger cars, adjustable range of 85 185mm. Lifting capcaity max. 4.200 kg (for 2.50 B and B ACCURA) DG Double-jointed arms Unique construction with double-jointed per lifting arm for reaches 100% of pick-up points easy lifting of passenger cars through 90 of lifitng arms positioning by Automotive Testing Technologies GmbH Techn. changes and errors excepted.
HYMAX Inground with lifting platform fast lifting maximum accessibility unrestricted work on axes and wheels minimum space required low construction only 58mm 2.35 R 2.35 R ACCURA STANDARD XY UNIVERSAL XY UNIVERSAL Lifting capacity (kg) 3500 3500 3500 3500 3500 Lifting height (mm) 2010 2069 2069 2085 2085 Lifting/ lowering time approx. (sec.) 30/30 30/30 30/30 20/20 20/20 Piston diameter (mm) 140 140 140 172, 140 172, 140 Distance between pistons (mm) 1280 1280 1280 variabel variabel Platform length (mm) 1600 2400 1524 2107 1400 1930 1536 2120 1400 1930 Platform width (mm) 890 1817 650 1990 710 1750 650 1990 Platform (mm) 426 365 450 415 450 Drive-on height (mm) 60 77 60 77 60 Installation depth (mm) 2493 2493 2493 1458 1458 Motor (kw) 3 3 3 3 3 Power supply (V/Hz) 400/50 400/50 400/50 400/50 400/50 STANDARD adjustable lengthwise fully galvanized platform length- and crosswise traversable optional rubber plates replace polymer pads for fast lifting at sillboard UNIVERSAL complete length- and crosswise adjustable powder coated platform drive-on ramps are adaptable to floor unevenness XY Lifting platform length- and crosswise adjustable for optimal achievement of pick-up points fully galvanized platform incl. 4 rubber plates HYMAX Inground
HYMAX Inground with runways s smoothly drive-on safe lifting easy to positioning low drive-on height (140mm) possible to install above-ground or in-ground surface treatment: powder coated, fire galvanize, INOX Design, OXYGEN care 2.35 P Plus H 2.50 P Plus & 2.50 P Plus H 2.35 P Plus with alignment support P & P ACCURA for 3,5t flat runway flat runway optional axle jack P for 3,5t flat runway with lifting capacity of 5t drive-on ramps for transporter and small truck flat runway optional axle jack P PLUS for 3,5t piston in piston runway + wheel-free lift with short stroke wheel-free lift: adjustable lengthwise with short stroke runway with low drive-on height drawing shows INOX Design (option) P PLUS H for 3,5t 2 in 1 runway + wheel-free lift; is adjustable in drive-on direction and operates to full stroke the runway and wheel-free lift operate independently from each other to the full lifting stroke drawing shows INOX Design (option) by Automotive Testing Technologies GmbH Techn. changes and errors excepted.
2.35 P 2.35 P ACCURA 2.35 P PLUS 2.35 P Plus H 2.50 P 2.50 P PLUS 2.50 P PLUS H Lifting capacity (kg) 3500 3500 3500 3500 5000 5000 5000 Lifting height (mm) 2040 2085 1920 2080 1970 1870 1970 Lifting/ lowering time approx. (sec.) 30/30 20/20 28/25 32/32 43/32 43/32 43/32 Piston diameter (mm) 140 172 140 172 140 (RFH) Distance between pistons (mm) 1280 variabel 1250 172 140 (RFH) 1650 RFH: 1250 160 160 160 1500 1500 1500 RFH: 2600 Arm extraction (mm) 450 1255 450 1255 Lowest pick-up point (mm) 140 215 115 190 Lifting height wheel-free lift (mm) 400 1900 675 1990 Lifting platform length (mm) 1529 1949 1400 1900 Drive-on height (mm) 140 140 140 140 ID: 160 170 170 170 Runway length (mm) 4400 4400 4400 4200 4800 4800 4800 Runway width (mm) 596 596 605 610 700 700 700 Total length above-ground (mm) 4920 4920 5165 5273 5790 5450 5790 Total width (mm) 2042 2042 2050 1994 2300 2300 2300 Installation depth (mm) 2493 1605 2500 2500 2350 2350 2350 Motor (kw) 3 3 3 3 3 3 3 Power supply (V/Hz) 400/50 400/50 400/50 400/50 400/50 400/50 400/50 Options JACK 2000 JACK 2500 air hydraulic scissor alex jack with lifting capacity of 2.000 and 2.500kg for an universal pick-up vehicles, either at the outer points of the axis without relief of the suspension or in the center of the axis. LASER JACK pneumatic scissor axle jack with lifting capacity of 2.000 for pick-up vehicles at the outer points of the axis. Lighting integrated lighting at the runways, make working under the body work easier. Installation cassette Preventing mistakes of foundation installation by use of installation cassette. P PLUS for 5t piston in piston integrated lifting arms as wheel-free lift, ideal for the car reception area and for diagnosis, as well as work on wheels for transporter and small truck wheel-free lift with short stroke runway length: 4.800 mm P PLUS H for 5t 2 in 1 the runways and the wheel-free lift with carrying arms works independently of each other and both have a lifting height of approx. 2m. You are actually getting 2 lifts in one. HYMAX Inground