Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K CABLE 2 1 /4 STEM 2 1 /4 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 111 lm/w 5 lm/ft 4.7 W/ft 16 lm/w 75 lm/ft 7.5 W/ft 1 lm/w 1 lm/ft 1.5 W/ft 96 lm/w * Based on a 4 foot luminaire using one driver Please consult factory for custom lumen output and wattage. 3 5 /8 3 5 /8 Ordering Guide CONTROL SENSORS 5 LED BOARD & DRIVER YEAR LUMINAIRE WARRANTY BDLED PRODUCT ID NOM. LUMENS/FT CRI COLOR TEMP. SHIELDING BDLED Pendant Direct LED 4 4 lm/ft - Minimum 8 8 CRI 27 27 K SO spotless lens 1 1 lm/ft - Maximum 9 9 CRI 3 3 K 35 35 K 4 4 K Outputs between listed min and max are available. Consult factory for outputs outside of the listed range. SO LENGTH MR (OPTIONAL) FINISH VOLTAGE DRIVER CIRCUITS 2 2 DMLED(#) downlight module LED AP aluminum paint 12 12 V DP dimming (-1V) 1% 1 1 circuit 3 3 W white 277 277 V D dimming (-1V) 5% 347V standard (2) 2 2 circuits 4 4 BLK black 347 347 V (1) LT Lutron (3) +E(#) emergency cirtuit (5) 5 5 C custom UNV universal BI bi-level dimming +NL(#) night light circuit (5) 6 6 O other (4) +GTD(#) generator transfer device (5) 8 8 +M MR 12 12 S# system run Add 6 per lamp. Specify quantity. Separate circuits included (1) D dimming (- 1V) 5% standard (2) For 347 V only (3) Specify system (4) Please consult factory; see page 2 (5) Specify quantity MOUNTING/SUSPENSION BATTERY (OPTIONAL) OTHER (OPTIONAL) IC CONTROLS (OPTIONAL) CUSTOM (OPTIONAL) CA(#) drywall+cable length (36 std.) B# battery pack (integral) F fuse DS# daylight sensor C custom CT9(#) TB/TG 9/16+cable length (36 std.) OS# occupancy sensor CT15(#) TB/TG15/16+cable length (36 std.) DOS# daylight & occupancy sensor CTS(#) ST+cable length (36 std.) EN# Enlighted integral (6) SA(#) drywall+stem length >48 (18 std.) ENR# Enlighted remote (6) Not available with 347V Please consult factory Requires 12V or 277V WC# wireless control dimming (6) Please consult factory Specify quantity. Requires 8" blank See integrated controls guide for more details. Please specify 1 / 5
CONSTRUCTION Housing End Cap Interior Brackets Reflectors Blank Lens Hanger Suspension Cable Grips ELECTRICAL APPROVALS Certified to UL and CSA standards Meets NYC requirements Suitable for damp locations. Extruded aluminum (.75'' nominal) Up to 7% recycled content Die Cast Zinc Die formed sheet steel (18 gauge) White powder coated sheet steel (22 gauge) Extruded aluminum (.75'' nominal) Spotless frosted acrylic lens Die formed sheet steel (16 gauge) Aircraft cable or Ø 1/2" stem Quick connecting / release Lutron driver* L3D - Hi-Lume A-Series EcoSystem 3-Wire Control (1%) LDE1 - EcoSystem H-Series (1%) LDE5 - EcoSystem 5-Series (5%) LTE - Hi-Lume A-series 2Wires Forward Phase (1%) *Consult factory Other drivers Emergency Input Voltage WARRANTY DALI - Digital Addressable Lighting Interface DMX - Digital Multiplex LV - line voltage - Advance Mark 1 Xitanium SR - For wireless sensor Integral emergency battery pack or emergency circuit optional. 12V, 277V, 347V, UNV. Incorporating these components may have limitations or affect the length of the luminaire. Please contact factory for more details. Axis Lighting will warrant defective LEDs, boards, and drivers for 5 years from date of purchase. Warranty is valid if luminaire is installed and used according to specifications. If defective, Axis will send replacement boards or drivers at no cost along with detailed replacement instructions and instructions on how to return defective components to Axis. OPTICS SO spotless lens CORNERS Unlit Corners - BEAM 2 LED features a multitude of layout patterns with the use of a number of corners : corner, T or X junctions. corner X junction T junction Lit Corners - Axis also offers lit corners including ceiling to ceiling, wall to ceiling and ceiling to wall. For custom corner angles, please consult factory. Specifications sheets for all corners are available at : www. WEIGHT Direct LED 4 ft Direct LED 8 ft Direct LED 12 ft JOINERS SPOTLESS LENS Frosted acrylic snap-in lens with micro lens 1.5 lbs / 4.8 kg 21. lbs / 9.6 kg 31.5 lbs / 14.4 kg 9 unlit corner wall to ceiling lit corner In order to allow very long runs of BEAM 2 LED luminaires, Axis has developed an effective joining system. Special care has been taken to maximize the performance of the joiner for each BEAM 2 LED option. SYSTEM (S#) BEAM 2 LED linear systems, with the use of a strong profile, allow for a nearly hair thin connection system of continuous runs. Lengths of 4', 8', 12' as well as custom lengths are available. Runs of BEAM 2 LED that are greater than 12' in length are designated as systems (S#). This means that the run is comprised of a combination 4', 8' and/or 12' sections to be assembled on site using our joining system. For more information on systems and joining, please refer to the BEAM 2 LED installation sheets available for download at www.. FINISHES Powder coated and custom finishes are also available. NOTE: Hang each system segment individually. Do not assemble system prior to hanging. 2 / 5
MOUNTING OPTIONS CT TILE CEILING - ON GRID OTHER MOUNTING OPTIONS BEAM 2 LED is also available with recessed, surface, wall, wall vertical and recessed vertical mounted options. Specification sheets and installation sheets for all mountings for BEAM 2 LED luminaires are available for download at www. DMLED MODULE Blank LED Module Quantity Spacing Extruded aluminum (.75'' nominal) 2'' diameter For every 4' section, there may be up to a maximum of 4 x DMLED module. Each DMLED module is placed centered on a blank section 6'' in length. CA DRYWALL CEILING For a series of modules within a given section length, they will be spaced evenly on a longer blank section. Custom spacing may be available on special request. Tilt each side. NORMAL POSITION 15 o TILT SA STEM MOUNT IN DRYWALL CEILING Between sections 6" At luminaire ends 6" LED SYSTEM CRI Minimum 8 or 9 color rendering index Several in a long blank section variable CCT LED life Thermal management Choice of 27K, 3K, 35K and 4K color temperature with a great color consistency (within 3.5 step MacAdam ellipse). Minimum 5,h with 7% of lumen maintenance in 25 C ambient temperature, in compliance with IES LM-8 testing measurements. Aluminium housing acting as the heat sink to maximize life. Beam Angle 3 nominal degrees Input Watts 3W Nominal 126 lumens Efficacy 42 lumens per watt Color Rendering Index (CRI) 8 Life 25, hours at L 7 Correlated color temperature (CCT) 3K More options are available upon request. Please consult factory. * See photometric report. 3 / 5
PHOTOMETRIC DATA 4 lm/ft 173 347 52 Angle 22.5 45 67.5 9 691 691 691 691 691 5 684 687 684 689 691 15 653 656 651 649 651 25 591 589 576 567 563 35 499 492 469 448 44 45 387 377 348 324 315 55 269 26 236 216 28 65 164 157 143 129 124 75 77 76 68 61 59 85 17 15 16 15 15-1 65 1-2 184 2-3 265 3-4 293 4-5 27 5-6 213 6-7 143 7-8 73 8-9 18 9 Angle 45 9 45 8552 7697 696 55 7344 6435 5672 65 669 528 4589 75 4673 419 3545 85 311 2871 2632 693 Luminaire : 4 lm/ft Input Watts: 3.6 W/ft Efficacy: 111 lm/w 8 CRI shown. For 9 CRI, divide wattage by.8 and multiply efficacy by.8. IES FILE: BDLED-4-8-4-SO.IES 5 lm/ft 217 433 65 Angle 22.5 45 67.5 9 863 863 863 863 863 5 855 858 855 862 863 15 817 82 813 812 813 25 738 737 72 78 73 35 623 615 587 56 55 45 483 472 435 45 393 55 337 325 295 27 26 65 25 197 178 162 155 75 97 95 85 77 73 85 22 18 2 18 18-1 81 1-2 229 2-3 331 3-4 367 4-5 337 5-6 266 6-7 178 7-8 92 8-9 23 9 Angle 45 9 45 169 962 87 55 918 844 789 65 7586 6599 5736 75 5841 5136 4431 85 3888 3589 329 867 Luminaire : 5 lm/ft Input Watts: 4.7 W/ft Efficacy: 16 lm/w 8 CRI shown. For 9 CRI, divide wattage by.8 and multiply efficacy by.8. IES FILE: BDLED-5-8-4-SO.IES All IES files are available for download at: www. 4 / 5
PHOTOMETRIC DATA 75 lm/ft 325 65 975 Angle 22.5 45 67.5 9 1295 1295 1295 1295 1295 5 1283 1288 1283 1293 1295 15 1225 123 122 1218 122 25 118 115 18 163 155 35 935 923 88 84 825 45 725 78 653 68 59 55 55 488 443 45 39 65 38 295 268 243 233 75 145 143 128 115 11 85 33 28 3 28 28-1 122 1-2 344 2-3 497 3-4 55 4-5 56 5-6 399 6-7 268 7-8 138 8-9 34 9 Angle 45 9 45 1635 14432 135 55 1377 1266 1634 65 1138 9899 864 75 8762 774 6647 85 5832 5383 4935 13 Luminaire : 75 lm/ft Input Watts: 7.5 W/ft Efficacy: 1 lm/w 8 CRI shown. For 9 CRI, divide wattage by.8 and multiply efficacy by.8. IES FILE: BDLED-75-8-4-SO.IES 1 lm/ft 433 867 13 Angle 22.5 45 67.5 9 1727 1727 1727 1727 1727 5 171 1717 171 1723 1727 15 1633 164 1627 1623 1627 25 1477 1473 144 1417 147 35 1247 123 1173 112 11 45 967 943 87 81 787 55 673 65 59 54 52 65 41 393 357 323 31 75 193 19 17 153 147 85 43 37 4 37 37-1 163 1-2 459 2-3 663 3-4 733 4-5 675 5-6 533 6-7 357 7-8 183 8-9 46 9 Angle 45 9 45 21381 19243 17399 55 1836 1687 14179 65 15173 13199 11472 75 11683 1273 8863 85 7776 7178 658 1733 Luminaire : 1 lm/ft Input Watts: 1.5 W/ft Efficacy: 96 lm/w 8 CRI shown. For 9 CRI, divide wattage by.8 and multiply efficacy by.8. IES FILE: BDLED-1-8-4-SO.IES All IES files are available for download at: www. 5 / 5