REQUEST FOR FORML I THE UNIVERSITY OF LM IN HUNTSVILLE PROUREMENT SERVIES 0 SPRKMN RIVE HUNTSVILLE, LM 99 PHONE () LL IS WILL E PULILY OPENE ON THE OPENING TE ESIGNTE T THE UNIVERSITY OF LM IN HUNTSVILLE, PROUREMENT SERVIES, USINESS SERVIES LG., HUNTSVILLE, LM 99. IS REEIVE FTER THE SPEIFIE TIME ON THE OPENING TE WILL NOT E ONSIERE. TE 0/9/0 I NUMER 000 RESPONSE UE Y: //0 :0 PM WHEN USING FEE, UPS, OR NY EPRESS PKGING/SHIPPING, THE I NUMER MUST E LERLY PRINTE ON THE IR ILL. ONTT PHONE VENOR NO. PMEL HURLEY «vendornum» V E N O R OR EQUL, REFER TO GENERL ONITIONS ON TTHE LL IS MUST E SIGNE, SELE, N RETURNE IN N ENVELOPE WITH THE I NUMER N OPENING TE NOTE ON FRONT. FORWR LL IS TO THE RESS INITE OVE. FILURE TO OMPLY WILL RESULT IN NO I RESPONSE IN ORNE WITH LM OMPETITIVE I LW subpart b. THE OVE I NUMER MUST PPER ON LL IS N RELTE ORRESPONENE NO QUNTITY UNIT ESRIPTION UNIT PRIE ETENSION 0 THE UNIVERSITY OF LM IN HUNTSVILLE REQUESTS IS FOR N EHUST SSEMLY S PER THE SPEIFITIONS. NO I WILL E EPTE Y F OR EMIL 0 WR: NO WR INFORMTION WILL E ME VILLE Y TELEPHONE, F, MIL, OR EMIL. ONE THE I IS WRE, THE WR INFORMTION N TULTION WILL E POSTE TO OUR WESITE: HTTP://WWW.UH.EU/USINESS SERVIES/VENORS/IOPPORTUNITIES SHOUL PURHSE ORER E ISSUE, THE FOREGOING N THE TERMS N ONITIONS ON THE TTHE SHLL E PPLILE N INING UPON THE VENOR. I KNOWLEGE THT I HVE SIGNTURE UTHORITY TO SIGN ON EHLF OF THE OMPNY N HEREY GREE TO LL GENERL ONITIONS OF THIS I REQUEST. TOTL SIGNTURE TE PGE OMPNY REPRESENTTIVE n ffirmative ction/equal Opportunity Institution
THE UNIVERSITY OF LM IN HUNTSVILLE requests bids for an Exhaust ssembly listed below per the specification below: id Prices are to include all shipping charges. (FO: estination) elivery may be a factor in determining the award of this bid. Quote earliest possible delivery after receipt of purchase order: The University of labama in Huntsville reserves the right to increase or decrease quantities as needed according to availability of funds. The University Reserves the right to accept or reject any or all bids and is not necessarily bound to accept the lowest bid if that bid is contrary to the best interest of the University. (See GENERL ONITIONS. WR) NOTE: For information regarding bid responses, it is the bidder s responsibility to provide in detail clear proof that the products they are bidding on are equal to or better than the requirements of the invitation. The bidder is responsible to clearly and specifically indicate the product being offered and to provide sufficient descriptive literature, catalog cuts, and technical details to enable UH to determine if the product offered meets the requirement of the invitation. Normally as in competitive sealed bidding only, the information furnished with the bid will be considered in the evaluation. Failure to furnish adequate data for evaluation purposes may result in declaring a bid nonresponsive. Unless the bidder clearly indicates in its bid that the product offered is an EQUL product, such bid will be considered to offer the brand name product referenced in the invitation. The University of labama in Huntsville will be sole judge of EQUL items submitted for bid. "ny contract resulting from this request will be made available to other eligible entities. This may include but is not limited to; The University of labama System, comprised of The University of labama; The U Enterprise, consisting of The University of labama at irmingham, the U Health System and their related foundations and affiliates, and The University of labama, Tuscaloosa, L; and other state entities. ontracts resulting from the award of this request cover shipments by any entity listed above. Each entity will generate its own purchase orders, payments, etc. and delivery must be made according to the instructions on the purchase order. The thrust of the contract is to obtain greater volume price discounts by combining the volume of purchases from participating entities within the State of labama. QUESTIONS: LL QUESTIONS RE TO E IRETE TO PMEL HURLEY VI EMIL pkh000@uah.edu, UNLESS OTHERWISE STTE IN THE SPEIFITION.
I SPEIFITIONS The project contains two sections; ) Exhaust Structure ssembly, and ) Exhaust Thermal ssembly. [This is a prototype effort for which we will select to suppliers to build and deliver a prototype unit. There is a potential run of 00+ units]. rawings are attached for each assembly. Suppliers can bid on item, item, or both..) Exhaust Structure ssembly Manufacture welded assemblies (sheet metal, tubing, angles) to fabricate separate components and package them with fasteners, gaskets, and other components as detailed in the drawings. Major components will be made of either SS or 0 SS. imensions, material callouts, and recommended sources for OTS components and insulation are contained in the drawings. Plenum: Plenum Top Frame ssembly (09) Plenum Frame ssembly (099) Plenum Elbow ssembly (00) Ejector: Ejector ssembly (0) Ejector Sheet Metal ssembly (09) Ejector Top Frame ssembly (0) Ejector Frame ssembly (0) Quotes should include, for the prototype and production units, line items for each assembly with individual lines for each subassembly, brief descriptions of any nonrecurring engineering costs, and lead time..) Exhaust Thermal ssembly Manufacture insulation blankets enclosed in embossed SS foil to fit structures being procured separately. Installation components and insulation are contained in the drawings. rawings: Plenum Insulation ssembly (00) Ejector Insulation ssembly (0) Quotes should include, for the prototype and production units line items for each assembly, brief descriptions of any nonrecurring engineering costs, and lead time.
FIRST RTILE PROTOTYPE QUOTTION Item escription Qty Total Price Exhaust Structure ssembly PROTOTYPE Plenum: Plenum Top Frame ssembly Plenum Frame ssembly Plenum Elbow ssembly Shipping $ Lead Time: Exhaust Thermal ssembly PROTOTYPE Ejector: Ejector ssembly Ejector Sheet Metal ssembly Ejector Top Frame ssembly Ejector Frame ssembly $ Shipping Lead Time: Exhaust Thermal ssembly rawings: Plenum Insulation ssembly (00) Ejector Insulation ssembly (0) $ Shipping 9 Lead Time: Total $
00 UNITS QUOTTION Ite m escription Qty Unit Price Total Price Exhaust Structure ssembly Plenum: Plenum Top Frame ssembly Plenum Frame ssembly Plenum Elbow ssembly 00 $ $ Shipping $ Lead Time: Exhaust Thermal ssembly Ejector: Ejector ssembly Ejector Sheet Metal ssembly Ejector Top Frame ssembly Ejector Frame ssembly 00 $ $ Shipping $ Lead Time: Exhaust Thermal ssembly rawings: Plenum Insulation ssembly (00) Ejector Insulation ssembly (0) $ $ Shipping $ 9 Lead Time: Total $
GENERL ONITIONS. ward: The University of labama in Huntsville reserves the right to accept or to reject any or all bids and is not necessarily bound to accept the lowest bid if that bid is contrary to the best interest of the University. In making an award, intangible factors such as bidder s service, integrity, facilities, equipment, reputation, and past performance will be weighed along with the quality displayed in the samples submitted. ids may be awarded either item by item, in products groups, or all or none, whichever appears to be in the best interest of the University. The University reserves the right to waive any or all formalities.. id Withdrawal: No bids may be withdrawn without approval from The University of labama in Huntsville Procurement Services. ny requests for withdrawal must be in writing to Procurement Services within five () days after opening date with justification for reason of withdrawal. More than two () such requests could result in removal from our bid list. No bid may be withdrawn after the issuance of purchase order. If a withdrawal is made after the purchase order is issued, the vendor will be considered in default. Refer to efault of ontractor.. Prices and Payment Terms: idders should quote applicable cash discounts. The University will not take into consideration in bid evaluation any cash discount of less than thirty (0) days duration. However, we will take advantage of all discounts for which we are eligible. Identify these discounts in your bid response. ids containing payment in advance or O requirements may be rejected.. pplicable Law: It is agreed this quotation is valid to the extent that it does not violate the constitution or the laws of the State of labama. idder represents and warrants that all article and services covered by this bid meet or exceed the safety standards established and promulgated under the Federal Occupational Safety and Health ct of 90, No. 00, and its regulations in effect or proposed as of the date of this bid. The furnishing of materials, supplies, equipment or service to The University of labama in Huntsville under this purchase order, contract, solicitation for bids, or construction specification constitutes assurance by the vendor or contractor of his compliance with applicable provisions of and pertinent regulations promulgated under Executive Order, date September, 9 issued by the President of the United States of merica, and Public Law, th ongress, the ivil Rights ct of 9.. Nonollusion: ny agreement or collusion among bidders or prospective bidders in restraint of freedom of competition, by agreement to bid at a fixed price or to refrain from bidding, or otherwise, shall render the bids of such bidders void. Each bidder certifies that he has not been a party to such an agreement by signing this bid.. New Products: Unless specifically called for in the bid, all products for purchase must be new, never previously used, and the current model and/or packaging. No remanufactured, demonstrator, used, or irregular product will be considered for purchase unless otherwise specified in the bid. The manufacturer s standard warranty will apply unless otherwise specified in the bid. ll requests should be supplied complete, ready to be installed, including all cabling and connectors where applicable.. onds: id and performance security bond, when required will be indicated.. id Submission: Failure to submit a bid on the official UH form provided for that purpose shall be a cause for rejection of the bid. Return of the complete document is required. Modification of or additions to any portion of the solicitation may be cause for rejection of the bid; however, UH reserves the right to decide, on a case by case basis, in its sole discretion, whether or not to reject such a bid as nonresponsive. ll information shall be entered in ink or typewritten in the appropriate space on the form. Mistakes may be crossed out and corrections inserted before submission of your bid. orrections shall be initialed in ink by the person signing the bid. ll bids must be signed. Failure to do so will result in rejection of bid.
9. elivery: Time of delivery shall be stated as the number of calendar days following receipt of the order by the vendor, to receipt of the goods by The University of labama in Huntsville. elivery time may be a criterion in awarding bids. Specify earliest possible delivery after receipt of order. Failure to deliver within the time vendor specified in the bid will constitute a default and may cause cancellation of the contract. Refer to efault of ontractor. ll prices quoted are to be F.O.. delivered to The University of labama in Huntsville, entral Receiving uilding, 0 Sparkman rive, Huntsville, labama, 99 (unless another F.O.. point is stated by the University on bid form). The successful bidder must assume all responsibility for damage in transit. When installation is required, it will be stated. If you are not quoting a delivered price, indicate your shipping point, and provide shipping cost for evaluation purposes. 0. id Terms: Show unit prices, extensions, and total price. In the event of a discrepancy between the unit price and the extension, the unit price shall govern. ids shall remain firm for minimum thirty (0) days from date of bid opening and any exception must be clearly stated.. id Opening: idders may attend the bid opening, but no information or opinions concerning the ultimate award will be given at the bid opening or during the evaluation process. fter the public opening of this bid, the results will not be available to bidders not attending the opening until after an award is made. id tabulations can be reviewed by accessing Procurement Services website at http://uah.edu/businessservices. lick on Vendors then id wards.. ids are Public Record: ll bids become a matter of public record at bid award. The University accepts no responsibility for maintaining confidentiality of any information submitted with bid whether labeled confidential or not.. Standards of Quality: When a material, article or piece of equipment is identified in these specifications by reference to manufacturer s or vendor s name, trade name, catalog and stock numbers, etc., it is intended merely to establish a standard; and, any material, article or equipment of other manufacturer and vendor which will perform equally the duties imposed by the general design, provided the material, article, or equipment proposed, is in the opinion of the Purchasing gent of equal substance and function. It shall not be purchased or installed by the contractor without the Purchasing gents written approval. The bidder is responsible to clearly and specifically indicate the product being offered and to provide sufficient descriptive literature, catalog cuts and technical detail to enable UH to determine if the product offered meets the requirements of the invitation. Normally in competitive sealed bidding only the information furnished with the bid will be considered in the evaluation. Failure to furnish adequate data for evaluation purposes may result in declaring a bid nonresponsive. Unless the bidder clearly indicates in its bid that the product offered is an Equal product, such bid will be considered to offer the brand name product referenced in the invitation. The University of labama in Huntsville will be sole judge of EQUL items bid.. Vendor uthorization: Vendor must be an authorized distributor/agent to sell products proposed in this bid request. When it is deemed to be in the best interest of the University, Procurement Services may request an onsite premise visit to examine the facility.. efault of ontractor: Where the University has determined the contractor to be in default, the University reserves the right to purchase any or all products or services covered by the contract on the open market and to charge the contractor with cost in excess of the contract price. Until such assessed charges have been paid, no subsequent bid from the defaulting contractor will be considered.. Fiscal Funding lause: The continuation of this contract is contingent upon the appropriation of funds to fulfill the requirements of the contract by the legislature. If the legislature fails to appropriate sufficient monies to provide the continuation of a contract, the contract shall terminate on the date of the beginning of the first fiscal year for which funds are not appropriated.
. ontract ancellation: Procurement Services has the right to cancel any contract, in accordance with Purchasing Rules and Regulations, for cause, including, but not limited to, the following: () failure to deliver within the contract; () failure of the product or service to meet specifications, conform to sample quality, or to be delivered in good condition; () misrepresentation by the contractor; () fraud, collusion, conspiracy, or other unlawful means of obtaining any contract with the state; () conflict of contract provisions with constitutional or statutory provisions of state or federal law; and () any other breach of contract.. Warranties: Should merchandise described on this bid contain a manufacturer s warranty, bidders must state the warranty terms in the space provided on the bid. ids offered for merchandise when no warranty applies must clearly state: NO WRRNTY OVERGE. Warranty information may be criteria in making this award. Failure of bidders to furnish this data may cause rejection of the complete bid as being nonresponsive. 9. isclosure Statement: The successful bidder will be required to file with Procurement Services a disclosure statement of relationship between contractors/grantees and employees/officials of the University. This form must be completed prior to issuance of the Purchase Order by The University of labama in Huntsville. 0. State of labama Immigration Law: Pursuant to the State of labama Immigration Law, by signing this contract, the contracting parties affirm, for the duration of the agreement, that they will not violate federal immigration law or knowingly employ, hire for employment, or continue to employ an unauthorized alien within the State of labama. Furthermore, a contracting party found to be in violation of this provision shall be deemed in breach of the agreement and shall be responsible for all damages resulting therefrom.. Restrictions On ommunications with University Staff: From the issue date of this Solicitation until a ontractor is selected and a contract award is made, idders are not allowed to communicate about the subject of the bid with any University administrator faculty, staff, or members of the oard of Trustees except: The Procurement Services representative, any University Procurement Official representing the University administration, or others authorized in writing by the Procurement Office and University Representatives during idder presentations. If violation of this provision occurs, the University reserves the right to reject the idder s response to this Solicitation. PRO. /
Note: In order for an alternate bid to be considered, bidders must supply current catalogs or brochures, including pictorials and specifications. F.O.. Point TERMS WRRNTY UH ESTINTION ESTIMTE ELIVERY YOUR REFERENE NO.* QUOTTION EFFETIVE UNTIL USINESS LSSIFITION (see note below): EMIL RESS: * Your company reference number, if applicable with this bid quotation. NOTE: Please indicate your company classification in the appropriate box above: Small usiness (S), a Small isadvantaged usiness (S), a lack Small isadvantaged usiness (), a WomanOwned Small usiness (W), a WomanOwned Small isadvantaged usiness (W), a lack WomanOwned Small isadvantaged usiness (W), a Large usiness (L), an Individual (IN), Educational (E), NonProfit (NP), a Labor Surplus rea oncern (LS), isabled VeteranOwned Small usiness (V), VeteranOwned Small usiness (VS), Historically Underutilized usiness Zone (UZ), or a Governmental gency (GV). ertification Pursuant To ct No. 00 labama Law (Section, ode of labama 9) provides that every bid submitted and contract executed shall contain a certification that the vendor, contractor, and all of its affiliates that make sales for delivery into labama or leases for use in labama are registered, collecting, and remitting labama state and local sales, use, and/or lease tax on all taxable sales and leases into labama. y submitting this bid, the bidder is hereby certifying that they are in full compliance with ct No. 00, they are not barred from bidding or entering into a contract pursuant to, and acknowledges that the awarding authority may declare the contract void if the certification is false. OMPNY NME (TYPE OR PRINT) TELEPHONE NUMER SIGNER S NME (TYPE OR PRINT) F NUMER SIGNTURE TE The University of labama in Huntsville prohibits the installation of asbestos on its campus. Suppliers and contractors will not supply any equipment, material, or supplies, which contain asbestos without prior written approval. Failure to designate id Number and Opening ate on the outside of your sealed envelope containing your bid and more than one bid submitted in this envelope will result in a No id response in accordance with labama ompetitive id Law subpart b. The University of labama in Huntsville will not accept faxed bids. ny product that fails to meet the specifications, performance requirements or compatibility requirements will be rejected and returned to the vendor at no cost to the University.
. / State of labama Immigration Law If the successful bidder is located in labama or employs an individual or individuals within the State of labama, the successful bidder shall provide a copy of its Employment Eligibility Verification (EVerify) company profile. To expedite the ordering process, this document may be submitted with the bid response. If the successful bidder is not located in the State of labama and does not employ an individual or individuals within the State of labama, the successful bidder shall complete and return the ertification of ompliance form included with this Request for Price Quotation (EVerify company profile is not required). To expedite the ordering process, this document may be submitted with the bid response. If you are not currently enrolled in EVerify, follow these instructions: Log onto www.uscis.gov/everify lick Getting Started for information about the program, requirements, and enrollment process. lick Enroll in EVerify and begin enrollment process. When enrollment process is complete, click Edit ompany Profile and print this onepage document. This onepage document must be submitted prior to a contract or purchase order being issued. For further assistance please consult the EVerify Quick Reference Guide. If you have previously enrolled in EVerify, follow these instructions: Log onto www.uscis.gov/everify lick Edit ompany Profile and print this onepage document. This onepage document must be submitted prior to a contract or purchase order being issued.
. / ERTIFITION OF OMPLINE WITH THE STTE OF LM IMMIGRTION LW The undersigned officer of (ompany) certifies to the oard of Trustees of the University of labama that the ompany is not located in labama and that the ompany does not employ an individual or individuals within the State of labama. SIGNTURE OF OMPNY OFFIER PRINT OMPNY NME PRINT NME OF OMPNY OFFIER PRINT TITLE OF OMPNY OFFIER TE. /
ISLOSURE STTEMENT OF RELTIONSHIP ETWEEN ONTRTORS/GRNTEES N EMPLOYEES/OFFIILS OF U/U/UH/US (THE UNIVERSITY OF LM SYSTEM ). ontract # 000. Name of ontractor/grantee ddress Phone. Nature of contract/grant Exhaust ssembly. oes the contractor/grantee have any relationship with an employee or official of the University, or a family member of such employee or official, that will enable such employee or official, or his/her family member, to benefit from this contract/grant? If so, please state the names, relationships, and nature of the benefit. (For employees of the University, family members include spouse and dependants. For members of the oard of Trustees (officials), family members include spouse, dependants, adult children or their spouses, parents, inlaws, siblings, and their spouses.) ertification Pursuant To ct No. 00 labama Law (Section, ode of labama 9) provides that every bid submitted and contract executed shall contain a certification that the vendor, contractor, and all of its affiliates that make sales for delivery into labama or leases for use in labama are registered, collecting, and remitting labama state and local sales, use, and/or lease tax on all taxable sales and leases into labama. y submitting this bid, the bidder is hereby certifying that they are in full compliance with ct No. 00, they are not barred from bidding or entering into a contract pursuant to, and acknowledges that the awarding authority may declare the contract void if the certification is false. This disclosure form will be available for public inspection upon request. The above information is true and accurate, to the best of my knowledge. Signature of uthorized gent ate
909 This form must be completed and returned before any contract(s) will be issued by the University.
RELESE LEVEL WG NO SH 099 0.0 (.0 ) (.00 ).00 (. ) (.00 ).0 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 099 0 OF
RELESE LEVEL WG NO SH 099 NOTES: STTUS ZONE ISION HISTORY ESRIPTION TE PPROVE. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. SOME HIEN LINES REMOVE FOR LRITY.. REMOVE LL URRS N REK SHRP EGES.. SURFE FINISH OR ETTER.. LL WELING NOTES N SYMOLS IN ORNE WITH WS... WEL LL ESSILE JOINTS PER WS.. VISULLY INSPET ONLY.. MTERIL: 0 STINLESS STEEL PER STM, 0." THIK STOK N.00".00"." STOK NGLE, 0 STINLESS STEEL PER STM, 0." THIK STOK.. EEPT INSIE ORNERS. MOUNTING SURFE TO E GROUN FLUSH. 9. TYPIL TO LL INSIE ORNERS. 0. WELS TO E GROUN FLUSH ON LOWER MOUNTING SURFE.. UNERSIE NOT REQUIRE.. PSSIVTE IN ORNE WITH STM 0.. IENTIFY Y PRT NUMER PER MILST0 USING /" LK LETTERS. SH LL LL INITIL RELESE MMYYYY SIES / / 9 / (/) SIE N RER ONLY / / / WRP OUTSIE ENS LL ROUN 0 0Y K THREE FEMLE OUPLING, IN 9 99 0999 RKET, PLENUM MUFFLER STM 99 099 NGLE, FRME, PLENUM STM 99 099 NGLE, FRME, PLENUM STM 99 099 NGLE, FRME, PLENUM STM 99 099 NGLE, FRME, PLENUM STM 99 099 NGLE, FRME, PLENUM STM (/) 99 099 NGLE, FRME, PLENUM STM 99 099 NGLE, FRME, PLENUM STM / 99 099 NGLE, FRME, PLENUM STM INE GE OE PRT NUMER QTY NOMENLTURE SPEIFITION ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. 0 / UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEEROGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST FRME SSEMLY, PLENUM RWING RESTRITIONS FOR OFFIIL USE ONLY 09 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.0 LS 099 OF
RELESE LEVEL WG NO SH 099.0.00 (0.00 ) 9 9.0 (.00 ) (.0 ) (.0 ) 0 (. ) (.0 ) (0. ) (. ) (.0 ).0.0..0 (.9 ). TOP VIEW (. ).0 FRONT VIEW OTTOM VIEW (. ).0 (.00 ) RIGHT VIEW RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0. SLE LS 099 OF
NOTES: RELESE LEVEL. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. INSTLL ITEMS N PER MNUFTURER INSTRUTIONS. STTUS SH LL ZONE LL WG NO SH 09 ISION HISTORY ESRIPTION TE PPROVE INITIL RELESE MMYYYY 009 SP PNEUMTI MUFFLER 9 KHN HE STEEL NIPPLE 99 099 PLENUM FRME SSEMLY INE GE OE PRT NUMER QTY NOMENLTURE SPEIFITION ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEER OGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST PLENUM FRME SSEMLY, GPU RWING RESTRITIONS FOR OFFIIL USE ONLY 09 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.0 LS 09 OF
RELESE LEVEL WG NO SH 09 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 09 OF
NOTES: RELESE LEVEL. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. INSTLL ITEM FIRST IN THE GPU. ITEMS N RE SSEMLE SEPRTELY EFORE MOUNTING ON ITEM.. IENTIFY Y PRT NUMER PER MILST0 USING /" LK LETTERS. STTUS SH LL ZONE LL WG NO SH 09 ISION HISTORY ESRIPTION TE PPROVE INITIL RELESE MMYYYY 0 0Y 0K HOSE LMP, SS, SE 0 9 0Y 909 WSHER, LOKING, / 0Y MS9 NUT, HE, / 0Y 9 SREW, MHINE, PN HE, /.0 INH LONG 9 0 WSHER, FLT, / 9 KHN HE STEEL NIPPLE 99 0 HOSE, LEE IR MILY0, STM, STM 99 0000 PLENUM INSULTION SSEMLY 99 0000 PLENUM ELOW SSEMLY 99 09 PLENUM TOP FRME SSEMLY INE GE OE PRT NUMER QTY NOMENLTURE SPEIFITION ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEEROGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST PLENUM SSEMLY, GPU EHUST RWING RESTRITIONS FOR OFFIIL USE ONLY 09 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.0 LS 09 OF
RELESE LEVEL WG NO SH 09 9 ETIL SLE 0.900 PLES SEE ETIL 0 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 09 OF
NOTES: RELESE LEVEL. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. PLE NONESTRUTIVE PLTE WITH SSEMLY IN ORNE WITH MILST.. REFER TO RWING 090 FOR GPU, KIT, EHUST N HRWRE. STTUS SH LL ZONE LL WG NO SH 09 ISION HISTORY ESRIPTION TE PPROVE INITIL RELESE MMYYYY 99 0 EJETOR TOP SSEMLY 99 09 PLENUM TOP SSEMLY INE GE OE PRT NUMER QTY NOMENLTURE SPEIFITION ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEEROGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST EHUST SSEMLY GPU RWING RESTRITIONS FOR OFFIIL USE ONLY GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.0 LS 09 OF
RELESE LEVEL WG NO SH 099.00.0. THRU.00.00 (. ) 09 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 099 OF
RELESE LEVEL WG NO SH 099.00.0. THRU.00.00 (. ) 09 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 099 OF
RELESE LEVEL WG NO SH 099 0.00. (.00 )..0 (. ) (.00 ).. THRU.00 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 099 OF
RELESE LEVEL WG NO SH 099 0.00.0 (.00 )..90 (. ) (.00 ).00. THRU. 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 099 OF
RELESE LEVEL WG NO SH 099..0 (.00 ).0.0 (. ) (.00 ). THRU 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 099 OF
RELESE LEVEL WG NO SH 099.. (.00 ).0.0 (. ). THRU (.00 ) 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 099 OF
RELESE LEVEL WG NO SH 099 (.00 ) 9.0 (. ) (.00 ) 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 099 OF
RELESE LEVEL WG NO SH 099 (.00 ).00 (. ) (.00 ) 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 099 OF
RELESE LEVEL WG NO SH 099 9 (.00 ).00 (. ) (.00 ) 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 099 9 OF
NOTES: RELESE LEVEL. PGU EHUST KIT SHOUL E INSTLLE USING T 090.. GPU EHUST KIT WILL ONLY E USE WHEN REPLING ENTIRE EHUST SSEMLY. STTUS SH LL ZONE LL WG NO 090 SH ISION HISTORY ESRIPTION TE PPROVE INITIL RELESE MMYYYY HRWRE KIT ONTENTS 99 T 090 GPU EHUST INSTLLTION INSTRUTIONS 99 0 EJETOR TOP SSEMLY 0 99 09 PLENUM TOP SSEMLY 9 0Y 9000 SREW, SELFTPPING, /,.00 LONG 00 9 LURINT, NTISEIZE, OZ. SEO SEL, ONIL, FLRE TUE FITTING, EGREE SEO SEL, ONIL, FLRE TUE FITTING, EGREE 00 OUPLING, VN 0Y 0K LMP, HOSE 0Y 90 0 NUT, HE, / 0Y 909 0 WSHER, LOKING, / 0Y 0 0 WSHER, FLT, / FIN GE OE PRT NUMER QTY NOMENLTURE SPEIFITION ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEER OGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST GPU KIT EHUST N HRWRE RWING RESTRITIONS FOR OFFIIL USE ONLY NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99.000 LS 090 OF
RELESE LEVEL WG NO SH 00 NOTES: STTUS ZONE ISION HISTORY ESRIPTION TE PPROVE. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. SOME HIEN LINES REMOVE FOR LRITY.. REMOVE LL URRS N REK SHRP EGES.. SURFE FINISH OR ETTER.. LL WELING NOTES N SYMOLS IN ORNE WITH WS... WEL GTW PER WS.. VISULLY INSPET, OMPLETE FUSION REQUIRE T ROOT OF JOINT N LONG EH LEG.. WEL GTW: VISUL EVIENE OF OMPLETE JOINT MELT THRU REQUIRE.. JOINT SHLL E PURGE URING WELING. 9. T, PLENUM SIES(S) RE PRLLEL N ENTERE ON THE FLNGE, INLET TUE. 0. MTERIL: STINLESS STEEL PER STM, 0." STOK THIKNESS, SHEULE PIPE. STINLESS STEEL PER STM. STINLESS STEEL PER STM0, 0." STOK THIKNESS. STINLESS STEEL PER STM, 0." STOK THIKNESS.. ITEM # MUST E EVELE Y MHINING OR GRINING PRIOR TO WELING TO LER FILLET WEL FROM ITEM # TO ITEM #.. WEL ITEM # TO ITEM # PRIOR TO WELING ITEM #.. PSSIVTE IN ORNE WITH STM 0.. IENTIFY Y PRT NUMER PER MILST0 USING /" LK LETTERS. SH LL LL INITIL RELESE MMYYYY 99 00 VNE, PLENUM STM 99 00 T, PLENUM SIE STM 99 00 PLENUM ELOW STM 99 00 FLNGE, INLET TUE STM INE GE OE PRT NUMER QTY NOMENLTURE SPEIFITION ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEEROGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST PLENUM ELOW SSEMLY, GPU RWING RESTRITIONS FOR OFFIIL USE ONLY 09 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.0 LS 00 OF
RELESE LEVEL WG NO SH 00 TYP LL JOINTS (. ) (.9 ) (. ) TYP LL JOINTS (. ) (.0 ) FRONT VIEW (. ) TOP VIEW R (.0 ) R (. ) (. ) (. ) FRONT VIEW (0. ) (.0 ) / K VIEW LEFT VIEW RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.00 SLE LS 00 OF
RELESE LEVEL WG NO SH 00 SEE ETIL R.0.00..0.9.0 R.0.0 R.0..00.00.0..0 +.000.00 ETIL SLE.000 SETION 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 00 OF
RELESE LEVEL WG NO SH 00 R....09 STK THIK.00 R.9 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 00 OF
RELESE LEVEL WG NO SH 00.. TRHU..0 (. ).. R. 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 00 OF
RELESE LEVEL WG NO SH 00 PLS..00 (. ).0.0 PLS 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 00 OF
RELESE LEVEL WG NO SH 00 NOTES: STTUS ZONE ISION HISTORY ESRIPTION TE PPROVE. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. NO EVITIONS FROM RWING WITHOUT PRIOR PPROVL FROM PROJET ENGINEER.. REMOVE LL URRS N REK SHRP EGES.. ITEMS N RE USE T SSEMLY 09 LEVEL.. LING SHOUL E STRTE T ENTER OF PRT, MOVING UP N OWN ON SIE. LING SHOUL E ONE IN FIGURE PTTERN, WITH TWISTS PER INH T THE EN.. ENSURE THT THE FINISHE SFETY WIRE IS TIGHT TO PENT FILURE UE TO RUING OR VIRTION.. OVERSTRESSE SFETY WIRE N REK UNER VIRTION IF TWISTE TOO TIGHTLY. SFETY WIRE MUST E PULLE TUT WHEN EING TWISTE N MINTIN LIGHT TENSION WHEN SEURE.. SFETY WIRE ENS MUST E ENT UNER N INWR TOWR THE PRT TO VOI SHRP OR PROJETING ENS, WHIH MY PRESENT SFETY HZR. SH LL LL INITIL RELESE MMYYYY SEE ETIL 9000 R SFETY WIRE, 0.0" IMETER STM 99 00 THERML INSULTION, PLENUM LEFT 99 009 THERML INSULTION, PLENUM RIGHT INE GE OE PRT NUMER QTY NOMENLTURE SPEIFITION ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. ETIL SLE.000 UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEEROGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST PLENUM INSULTION SSEMLY, GPU RWING RESTRITIONS FOR OFFIIL USE ONLY 09 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.00 LS 00 OF
RELESE LEVEL WG NO SH 00 ( R.0 ) ( R.0 ) ( R. ) ( R.9 ) (. ) (. ) (9. ) RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 00 OF
RELESE LEVEL WG NO SH 009 NOTES: STTUS ZONE ISION HISTORY ESRIPTION TE PPROVE. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. SOME HIEN LINES REMOVE FOR LRITY.. REMOVE LL URRS N REK SHRP EGES.. THERE SHLL E NO EPOSE INSULTION.. MTERIL: STINLESS STEEL EMOSSE FOIL, 0.00" THIK PER STM0 KOWOOL #, L/U FT, ERMI FIER LNKET PER MILI. SH LL LL INITIL RELESE MMYYYY 9.... R.0. R. R.9 0 SSS PSTN RIVET 99 009 SS FOIL 0.00" THIK STM 0 99 009 KOWOOL # LNKET, RIGHT MILI INE GE OE PRT NUMER QTY NOMENLTURE SPEIFITION ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEEROGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST THERML INSULTION, PLENUM RIGHT RWING RESTRITIONS FOR OFFIIL USE ONLY 00 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.00 LS 009 OF
RELESE LEVEL WG NO SH 00 NOTES: STTUS ZONE ISION HISTORY ESRIPTION TE PPROVE. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. SOME HIEN LINES REMOVE FOR LRITY.. REMOVE LL URRS N REK SHRP EGES.. THERE SHLL E NO EPOSE INSULTION.. MTERIL: STINLESS STEEL EMOSSE FOIL, 0.00" THIK PER STM0 KOWOOL #, L/U FT, ERMI FIER LNKET PER MILI. SH LL LL INITIL RELESE MMYYYY 9. R.... R.0.. TYP R.9 0 SSS PSTN RIVET 99 00 SS FOIL.00" THIK STM 0 99 00 KOWOOL # LNKET, LEFT MILI INE GE OE PRT NUMER QTY NOMENLTURE SPEIFITION ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEEROGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST THERML INSULTION, PLENUM LEFT RWING RESTRITIONS FOR OFFIIL USE ONLY 00 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.00 LS 00 OF
NOTES: RELESE LEVEL. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. MTERIL: MKE FROM OULEPLY, SILIONEOTE WOVEN FIERGLSS HOSE PER MILY0, STM N STM; MNUFTURE Y FLEF LL. STTUS SH LL ZONE LL WG NO SH 0 ISION HISTORY ESRIPTION TE PPROVE INITIL RELESE MMYYYY..00.00 ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEEROGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST HOSE, LEE IR RWING RESTRITIONS FOR OFFIIL USE ONLY 09 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.0 LS 0 OF
NOTES: RELESE LEVEL. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009. STTUS SH LL ZONE LL WG NO SH 0 ISION HISTORY ESRIPTION TE PPROVE INITIL RELESE MMYYYY 0Y MS9 NUT, HE, / 0Y 900 SREW, MHINE, PN HE, /, 0.0 INH LONG 9 0 WSHER, FLT, / 99 0 EJETOR SSEMLY 99 0 EJETOR FRME SSEMLY INE GE OE PRT NUMER QTY NOMENLTURE SPEIFITION ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEEROGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST EJETOR SSEMLY, GPU EHUST RWING RESTRITIONS FOR OFFIIL USE ONLY 09 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.0 LS 0 OF
RELESE LEVEL WG NO SH 0 NOTES: STTUS ZONE ISION HISTORY ESRIPTION TE PPROVE. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. REMOVE LL URRS N REK SHRP EGES.. SURFE FINISH OR ETTER.. LL WELING NOTES N SYMOLS IN ORNE WITH WS... WEL LL ESSILE JOINTS PER WS.. VISULLY INSPET ONLY.. EEPT INSIE ORNERS. MOUNTING SURFE TO E GROUN FLUSH.. INSIE ORNERS ().. LL WELS IN RES OF SLOTS TO E GROUN FLUSH. 9. MTERIL: 0 STINLESS STEEL PER STM, 0." THIK STOK N.00".00"." STOK NGLE. 0. PSSIVTE IN ORNE WITH STM 0.. IENTIFY Y PRT NUMER PER MILST0 USING /" LK LETTERS. SH LL LL INITIL RELESE MMYYYY / / / / 0Y 9 SREW, MHINE, PN HE,, 0.0 INH LONG 99 0 STOPPER, EJETOR 99 0 NGLE, FRME, EJETOR STM / 99 0 NGLE, FRME, EJETOR STM 99 0 NGLE, FRME, EJETOR STM 99 0 NGLE, FRME, EJETOR STM 0 99 00 NGLE 0, FRME, EJETOR STM 9 99 09 NGLE 9, FRME, EJETOR STM 99 0 NGLE, FRME, EJETOR STM 99 0 NGLE, FRME, EJETOR STM 99 0 NGLE, FRME, EJETOR STM 99 0 NGLE, FRME, EJETOR STM 99 0 NGLE, FRME, EJETOR STM 99 0 NGLE, FRME, EJETOR STM 99 0 NGLE, FRME, EJETOR STM 99 0 NGLE, FRME, EJETOR STM / / INE GE OE PRT NUMER QTY NOMENLTURE SPEIFITION ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. / MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. / (/) / / / / UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEEROGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST EJETOR FRME SSEMLY, GPU RWING RESTRITIONS FOR OFFIIL USE ONLY 0 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.0 LS 0 OF
RELESE LEVEL WG NO SH 0 0 9 ETIL SLE 0.00 PLES SEE ETIL RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 0 OF
RELESE LEVEL WG NO SH 0 (.9 ) (.00 ) (.0 ) (. ) (.0 ) (.0 ) (. ).0 (. ) (.0 ) (.0 ) (.0 ) TOP VIEW.0 OTTOM VIEW (. ) (.9 ).9 (. )...0 FRONT VIEW (9. ) LEFT VIEW (.9 ) K VIEW RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 0 OF
RELESE LEVEL WG NO SH 0 0 (. ) (.00 ).0 (.00 ).00 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 0 0 OF
RELESE LEVEL WG NO SH 0.0.0 (.00 ). (.00 ) (.00 ) (.00 ) (. ) 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.00 SLE LS 0 OF
RELESE LEVEL WG NO SH 0..0 9.00 0.00 (.00 ) (.00 ) (. ) TP N RILL FOR UN PLES 09 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.00 SLE LS 0 OF
RELESE LEVEL WG NO SH 0.. (.00 ).0. (. ) (.00 ) TP N RILL FOR UN PLES 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.00 SLE LS 0 OF
RELESE LEVEL WG NO SH 0 (.00 ). (. ) (.00 ) RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 0 OF
RELESE LEVEL WG NO SH 0 (.00 ). (. ) (.00 ) RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.00 SLE LS 0 OF
RELESE LEVEL WG NO SH 0 (.00 ) (. ) (.00 ). RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 0 OF
RELESE LEVEL WG NO SH 0 (.00 ). (. ) (.00 ) RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 0 OF
RELESE LEVEL WG NO SH 0.00.0.0 R.0 TYP.. THRU.. (.0 ) RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 0 OF
RELESE LEVEL WG NO SH 0.0.0.. (.00 )..0. (. ) (.00 ) 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO SLE 99 0.00 LS 0 OF
RELESE LEVEL WG NO SH 0.0.0..0 (.00 ). (. ). (.00 ). 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.00 SLE LS 0 OF
RELESE LEVEL WG NO SH 0. THRU (. ) (.00 ).. (.00 ).9.0 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 0 OF
RELESE LEVEL WG NO SH 0. (.00 ) (. ). (.00 ).0 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 0 OF
RELESE LEVEL WG NO SH 0. (.00 ) (. ).00 (.00 ).90 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 0 OF
RELESE LEVEL WG NO SH 0 9.00 (.00 ).0 (. ) (.00 ) 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.00 SLE LS 0 9 OF
RELESE LEVEL WG NO SH 0 NOTES:. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. SOME HIEN LINES REMOVE FOR LRITY.. SPOT WEL ITEM #, WELING WSHER TO PIN WEL PIN IN PLES.. IENTIFY Y PRT NUMER PER MILST0 USING /" LK LETTERS.. ITEM 09 IS TO E INSTLLE T THIS LEVEL. STTUS SH LL ZONE LL ISION HISTORY ESRIPTION INITIL RELESE TE MMYYYY PPROVE 99 0K R SFETY WIRE, 0.0" IMETER 99 0 INSULTION SSEMLY, EJETOR MILI 99 0 INSULTION SSEMLY, EJETOR MILI 99 09 REINFORE, EJETOR, OTTOM 0Y 90090 SREW, MHINE, PN HE,, 0.0 INH LONG 99 0 FLNGE, EJETOR, TOP STM 0Y 9009 SREW, MHINE, PN HE,, 0.0 INH LONG 0Y 900 NUT, LOK, HE, 0 0Y 9009 9 SREW, MHINE, PN HE,, 0. INH LONG 9 0Y 90 WSHER, FLT, 0Y 900 WSHER, WELING 99 0 RKET, INSULTION FLNGE STM 99 0 RKET SEL STM 99 0 RKET, SEL STM 99 00 SEL, TOP FLNGE MOUNT STM 99 09 PLTE, EJETOR, OTTOM STM 99 0 INSULTION, EJETOR, INSIE MILI 99 09 EJETOR SSEMLY INE GE OE PRT NUMER QTY NOMENLTURE SPEIFITION ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEER OGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST EJETOR SSEMLY, GPU RWING RESTRITIONS FOR OFFIIL USE ONLY 0 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.00 LS 0 OF
RELESE LEVEL WG NO SH 0 9 0 9 9 9 9 9 FRONT VIEW RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.00 SLE LS 0 OF
RELESE LEVEL WG NO SH 0 ETIL SLE.000 SEE ETIL SEE ETIL 0 SETION REFERENE ONLY OTTOM VIEW ETIL SLE.000 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.00 SLE LS 0 OF
RELESE LEVEL WG NO SH 09 NOTES: STTUS ZONE ISION HISTORY ESRIPTION TE PPROVE. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. REMOVE LL URRS N REK SHRP EGES.. SURFE FINISH OR ETTER.. LL WELING NOTES N SYMOLS IN ORNE WITH WS... WEL GTW PER WS.. VISULLY INSPET ONLY. OMPLETE FUSION REQUIRE T ROOT OF JOINT N LONG EH LEG.. WEL GTW: VISUL EVIENE OF OMPLETE JOINT MELT THRU REQUIRE.. JOINT SHLL E PURGE URING WELING.. EEPT S INITE. 9. TYPIL LL SEMS 0. MTERIL: STINLESS STEEL PER STM, 0.0" THIK STOK.. PSSIVTE IN ORNE WITH STM 0. SH LL LL INITIL RELESE MMYYYY 9 9 0Y 900 PIN, WEL 99 09 REINFORE, EJETOR, OTTOM STM 99 09 LIP, EJETOR, TOP STM 99 09 K LIP, EJETOR STM 99 09 TOP FLNGE, EJETOR STM 99 09 LEFT SIE, EJETOR STM 99 09 FRONT PNEL, EJETOR STM PLS TYP 0.0 0.0 PLS 99 09 RIGHT SIE, EJETOR STM 99 09 K PNEL, EJETOR STM INE GE OE PRT NUMER QTY NOMENLTURE SPEIFITION ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEER OGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST EJETOR SSEMLY RWING RESTRITIONS FOR OFFIIL USE ONLY 0 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.0 LS 09 OF
RELESE LEVEL WG NO SH 09 0. 9.0.9.0 9 (.9 ) 9.. 9. SETION..0 0. SETION RIGHT VIEW RIGHT VIEW ROTTE W RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 09 OF
RELESE LEVEL WG NO SH 09 (.9 ) 0.0 (.90 ) (.0 ) (. ) (9.0 ) (. ) (.9 ) PLS TYP 0.0 LEFT VIEW FRONT VIEW RIGHT VIEW K VIEW PLS TYP 9 OTTOM VIEW RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 09 OF
RELESE LEVEL WG NO SH 09 0 R.0..0 (.0 THIK).0 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 09 0 OF
RELESE LEVEL WG NO SH 09 NOTES:. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. SOME HIEN LINES REMOVE FOR LRITY. REMOVE LL URRS N REK SHRP EGES.. SURFE FINISH OR ETTER.. MTERIL: STINLESS STEEL, PER STM0.00" 0." STOK FLT R.. PSSIVTE IN ORNE WITH STM 0.. IENTIFY Y PRT NUMER PER MILST0 USING /" LK LETTERS.. HOLES TO E E T NET TOP SSEMLY 0. 9. RWING MUST OMPNY PRT....9. (.00 ).0 (. ). THRU 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 09 OF
RELESE LEVEL WG NO SH 09.9.9 ( ).99 (.00 THIK). 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO SLE 99 0. LS 09 OF
RELESE LEVEL WG NO SH 09.00.9.00 0. R....0.. 9.0 SEE ETIL (.0 THIK). ETIL SLE 0.00 RIGHT VIEW FRONT VIEW R.0 0. OTTOM VIEW RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO SLE 99 09 0.0 LS OF
RELESE LEVEL WG NO SH 09. THRU.99.00.9. 0. R....0.. (.0 THIK). ETIL SLE 0.00. 9.0 SEE ETIL RIGHT VIEW FRONT VIEW R.0 0. OTTOM VIEW RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 09 SLE 0.0 LS OF
RELESE LEVEL WG NO SH 09.. ( ).0. (.0 THIK) 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 09 SLE 0.0 LS OF
RELESE LEVEL WG NO SH 09 9.0.0 R.0.00.9 (.0 THIK) 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99.000 SLE LS 09 9 OF
RELESE LEVEL WG NO SH 09 R..0 (. ) 0.0 0.0 9..0.0.0.0.0...0. THRU.9.9.9.9 9.9.9.9.90.0.9 0 RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.00 SLE LS 09 OF
RELESE LEVEL WG NO SH 0 NOTES: STTUS ZONE ISION HISTORY ESRIPTION TE PPROVE. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. SOME HIEN LINES REMOVE FOR LRITY.. REMOVE LL URRS N REK SHRP EGES.. SURFE FINISH OR ETTER.. MTERIL: STINLESS STEEL PER STM0, 0." STOK THIKNESS.. PSSIVTE IN ORNE WITH STM 0. SH LL LL INITIL RELESE MMYYYY.0.9...0 0.0. 9..0.0..00....9.. 0. SEE ETIL (. ) R. 0 OTTOM VIEW RIGHT VIEW TOP VIEW. THRU.0 ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. ETIL SLE.000 PLES UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEER OGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST TOP FLNGE, EJETOR SSEMLY, GPU RWING RESTRITIONS FOR OFFIIL USE ONLY 0 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.0 LS 0 OF
RELESE LEVEL WG NO SH 0.9.... 9.....9.... 0.9.9...9 RILL N TP FOR UN THRU......... 0. 9. 9.. THRU OTTOM VIEW RIGHT VIEW TOP VIEW RWING RESTRITIONS FOR OFFIIL USE ONLY SIZE GE OE WG NO 99 0.0 SLE LS 0 OF
NOTES: RELESE LEVEL. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. SOME HIEN LINES REMOVE FOR LRITY.. MTERIL: KOWOOL #, L/U FT, ERMI FIER LNKET PER MILI. STTUS SH LL ZONE LL WG NO SH 0 ISION HISTORY ESRIPTION TE PPROVE INITIL RELESE MMYYYY.9.00 (.00 )..9 ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEER OGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST INSIE INSULTION, EJETOR K RWING RESTRITIONS FOR OFFIIL USE ONLY 0 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.0 LS 0 OF
RELESE LEVEL WG NO SH 09 NOTES: STTUS ZONE ISION HISTORY ESRIPTION TE PPROVE. LL IMENSIONS N TOLERNES IN ORNE WITH SME Y.009.. SOME HIEN LINES REMOVE FOR LRITY.. REMOVE LL URRS N REK SHRP EGES.. SURFE FINISH OR ETTER.. MTERIL: STINLESS STEEL PER STM0, 0.0" STOK THIKNESS.. PSSIVTE IN ORNE WITH STM 0.. IENTIFY Y PRT NUMER PER MILST0 USING /" LK LETTERS. SH LL LL INITIL RELESE MMYYYY.00 THRU R..9 0.. 0.. R..0.00. THRU.0 (.0 )..0.0. 0.9.0 SIE VIEW.0 TOP VIEW ISTRIUTION STTEMENT. PPROVE FOR PULI RELESE; ISTRIUTION IS UNLIMITE. MINTINE. HNGES SHLL E INORPORTE Y THE ESIGN TIVITY. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N TOLERNES RE S FOLLOWS. NGLES ±. PLE EIMLS ±.00 PLE EIMLS ±.0 ONTRT NO WPQ00 RFTER OGN GHIT ENGINEER OGN GHIT TITLE U.S. RMY VITION N MISSILE OMMN RESTONE RSENL, LM 9 THIR NGLE PROJETION STRESS HEKER JIM SEQUIST INSIE PLTE, EJETOR K RWING RESTRITIONS FOR OFFIIL USE ONLY 0 GPU NET SSY USE ON PPLITION MNGER SUE O'RIEN SIZE GE OE WG NO SLE 99 0.0 LS 09 OF