Technical specification Binding agent spreader MC series SW 12 MC SW 16 MC SW 20 MC
Technical specification 02 03 Binding agent spreader SW 12 MC Container Container capacity 15.7 yd³ (12 m 3 ) Size of filling connector / filling hose 3 /4 /5 Conveyor chain Width of conveyor chain 37.4 in (950 mm) Opening height of slide gate 13.8 in (350 mm) Spreading unit (metering feeders) Ø 9.1 in (230 mm) Ø 16.1 in (410 mm) Working width / partial widths 8 ft 1 in / 3 x 32.3 in (2,460 mm / 3 x 820 mm) Spreading quantity at 1.2 mph (2 km / h) *¹ 0.02 1.5 gal / ft² (1 60 l / m²) Hydraulic system Max. hydraulic power 19.8 gal / min x 4,351 psi (75 l / min x 300 bar) 23.8 gal / min x 4,351 psi (90 l / min x 300 bar) Capacity of hydraulic fluid tank 26.4 gal (100 l) Weights Built-up empty weight * 2 8,818 lbs (4,000 kg) Truck requirements Minimum speed of auxiliary drive 500 rpm Required speed of auxiliary drive for max. hydraulic power 700 rpm 800 rpm Max. permissible speed of auxiliary drive 2,600 rpm Required power output of auxiliary drive 40 kw 48 kw Required torque of auxiliary drive 400 Nm 570 Nm Electrical system standard 24 V / 20 A 24 V / 20 A * 1 = Quantity applied depends on various parameters (e.g. binder, feeding unit and job-site conditions) * 2 = Basic machine without any additional equipment
Binding agent spreader SW 16 MC Binding agent spreader SW 20 MC 20.9 yd³ (16 m 3 ) 26.2 yd³ (20 m 3 ) 3 /4 /5 3 /4 /5 37.4 in (950 mm) 37.4 in (950 mm) 13.8 in (350 mm) 13.8 in (350 mm) Ø 9.1 in (230 mm) Ø 16.1 in (410 mm) Ø 9.1 in (230 mm) Ø 16.1 in (410 mm) 8 ft 1 in / 3 x 32.3 in (2,460 mm / 3 x 820 mm) 8 ft 1 in / 3 x 32.3 in (2,460 mm / 3 x 820 mm) 0.02 1.5 gal / ft² (1 60 l / m²) 0.02 1.5 gal / ft² (1 60 l / m²) 19.8 gal / min x 4,351 psi (75 l / min x 300 bar) 23.8 gal / min x 4,351 psi (90 l / min x 300 bar) 19.8 gal / min x 4,351 psi (75 l / min x 300 bar) 23.8 gal / min x 4,351 psi (90 l / min x 300 bar) 26.4 gal (100 l) 26.4 gal (100 l) 9,921 lbs (4,500 kg) 11,023 lbs (5,000 kg) 500 rpm 500 rpm 700 rpm 800 rpm 700 rpm 800 rpm 2,600 rpm 2,600 rpm 40 kw 48 kw 40 kw 48 kw 400 Nm 570 Nm 400 Nm 570 Nm 24 V / 20 A 24 V / 20 A 24 V / 20 A 24 V / 20 A
Dimensions 04 05 Binding agent spreader SW 12 MC Built-up unit with 2-axle truck min. 3.9 in (100) 29.5 in (750) 15 ft 1 in (4,600) 7 ft 10 in (2,400) 11 ft 2 in (3,400) * 1 optional * 2 3 ft 5 in (1,050) 11 ft 1 in (3,380) * 1 11 ft (3,350) * 1 13 ft 9 in (4,200) * 1 5 ft 3 in (1,600)* 1 6 ft 7 in (2,000)* 1 * 2 8 ft 1 in (2,460) 8 ft 4 in (2,550) 23 ft 11 in (7.300) * 1 * 1 = Dimensions based on MAN chassis * 2 = Frame extension with trailer coupling (optional) 25 ft 3 in (7,700) * 1 * 2 Binding agent spreader SW 16 MC Built-up unit with 3-axle truck min. 3.9 in (100) 29.5 in (750) 16 ft 8 in (5,100) 7 ft 10 in (2,400) 11 ft 2 in (3,400) * 1 optional * 2 3 ft 5 in (1,050) 12 ft (3,660) * 1 11 ft (3,350) * 1 6 ft 11 in (2,100) * 1 14 ft 1 in (4,300) * 1 8 ft (2,450) * 1 * 2 8 ft 1 in (2,460) 8 ft 4 in (2,550) 25 ft 11 in (7,900) * 1 * 1 = Dimensions based on MAN chassis * 2 = Frame extension with trailer coupling (optional) Dimensions in American standard and mm 27 ft 1 in (8,250) * 1 * 2
Binding agent spreader SW 16 MC and SW 20 MC Built-up unit with 4-axle truck min. 29.5 in 3.9 in (100) (750) 20 ft (6,100) 7 ft 10 in (2,400) 11 ft 2 in (3,400) * 1 SW 16 MC: 11 ft 1 in (3,380) * 1 SW 20 MC: 12 ft (3,660) * 1 14 ft 3 in (4,350) * 1 15 ft (4,580) * 1 6 ft 11 in (2,100) * 1 8 ft 1 in (2,460) 8 ft 4 in (2,550) 29 ft 8 in (9,050) * 1 * 1 = Dimensions based on MAN chassis Transport dimensions of binding agent spreader SW 12 MC, SW 16 MC and SW 20 MC (Built-up unit, without truck) 29.5 in (750) B Filling chute and 7 ft 10 in (2,400) dismantled, 1 or 2 accessory boxes depending on equipment A E C 8 ft (2,440) D 8 ft 6 in (2,600) A B C D E SW 12 MC (built-up unit for 2 axles) 7 ft (2,140) 15 ft 1 in (4,600) 14 ft 4 in (4,380) 16 ft 4 in (4,980) 7 ft 4 in (2,240) SW 16 MC (built-up unit for 3 axles) 7 ft 11 in (2,420) 16 ft 9 in (5,100) 16 ft (4,880) 18 ft (5,480) 8 ft 3 in (2,520) SW 16 MC (built-up unit for 4 axles) 7 ft (2,140) 20 ft (6,100) 19 ft 3 in (5,880) 21 ft 3 in (6,480) 7 ft 4 in (2,240) SW 20 MC (built-up unit for 4 axles) 7 ft 11 in (2,420) 20 ft (6,100) 19 ft 3 in (5,880) 21 ft 3 in (6,480) 8 ft 3 in (2,520) Dimensions in American standard and mm
Equipment features 06 07 SW 12 MC SW 16 MC 3 axles SW 16 MC 4 axles SW 20 MC Container / chassis Lockable side doors Storage compartments Loading and lashing lugs Sub-frame for the carrying vehicle Relief cover on the conveyor chains to prevent material building up in the container Vent pipe and pressure relief flap integrated into the container 3 pneumatic filling device on both sides 4 pneumatic filling device on both sides 4 high-speed pneumatic filling device on both sides Filling device with stone filter Hydraulic slide gate Filling chute with 2 sensor-controlled transverse augers Sensor-controlled conveyor chain Lateral protection * 1 Drive / control system / on-board computer Closed on-board hydraulic system Hydraulic oil cooler WeighTronic electronic weighing device with automatic adjustment Speed sensor mounted on the wheels Radar unit for speed sensing Control terminal Infinite adjustment of the quantity to be spread Level indicator Container full or empty Standard drive on both sides OptiPower drive on both sides Auxiliary engine for operation independently of the carrying vehicle or tractor * 1 = Required for TÜV approval in Germany = Standard equipment = Optional equipment = Not available
SW 12 MC SW 16 MC 3 axles SW 16 MC 4 axles SW 20 MC Spreading unit Size DN 230-10 rotary feeding unit High-performance size DN 410-17 rotary feeding unit Self-cleaning rotary feeders Three separately controlled part-widths All-automatic dosing, regardless of the travel speed Miscellaneous Dust protection Access ladder Bag filter package Automatic dust-collecting filter system Job data printer for documenting consumption of binding agent and performance per unit area Rotary compressor for automatic filling from a stationary silo and / or for cleaning the machine Monitor system for monitoring the rear working area Lighting package with 4 LED working lights Water spray system with water tank to reduce dust formation during the spreading process High-pressure cleaner with water tank Collecting pan and digital suspended scales for checking the spread quantity = Standard equipment = Optional equipment = Not available
Made by STREUMASTER Maschinenbau GmbH WIRTGEN AMERICA Inc. 6030 Dana Way Nashville, TN 37013, USA Phone: (615) 501-0600 Fax: (615) 501-0691 Internet: www.wirtgenamerica.com All details, illustrations and texts are non-binding and may include optional additional fittings. Subject to technical modifications. Performance data dependant upon operational conditions. No. 2589753 US-04/16 WIRTGEN GmbH 2016. Printed in Germany.