Thermal Circuit Breaker, rotary knob actuation, -, - or 3-pole -pole standard version 3-pole type without front bezel/knob standard front bezel/knob Description Thermal circuit breaker -, - or 3-pole Supplementary protector for general industrial use Positively trip-free release Bezel/knob snap-on Easy actuation with gloves Front elements can be done by customer Standards IEC 6093 UL 0 CSA C. 3 GB 0 Applications High pressure cleaners Floor cleaning equipment Power tools Wood and stone working machines Equipment for building construction Industrial equipment Commercial kitchen appliances Weblinks Approvals: http://www.schurter.com/approvals RoHS: http://www.schurter.com/rohs Technical Data Rated voltage U e -pole AC 0 V / 0/60 Hz DC 3 V -pole AC 0 V / 0/60 Hz DC 60 V 3-pole AC Y/0 V / 0/60 Hz Rated current - / -pole 0.0 0 A 3-pole 0.0 A Conditional short - / -pole, AC 0 V 0.0 0 A: 000 A, SC (C) circuit c 3-pole, AC V 0.0 A: 000 A Degree of protection Accessible range IP 0 Terminal side IP 00 Dielectric strength 0 Hz > 00 V Impulse./0 µs > 000 V Insulation resistance DC 00 V > 00 MOhm Endurance (typical) Mechanical 0 000 cycles AC: x, cos phi 0.6 0 000 cycles DC: x, L/R = 3ms 0 000 cycles Overload IEC 6093 min. 0 cycles @ 6 x, cos phi 0.6 UL 0 min. 0 cycles @. x, cos phi 0. (OLØ) Admissible ambient 30 C to +60 C air temperature Resistance to vibration IEC 60068--6, Test Tc 0 60 Hz: ±0. mm 60 00 Hz: 0 G Shock resistance Type of tripping IEC 60068--, Test Ea 30 G / 8 ms Weight -pole g -pole 60 g 3-pole g Max. switching capacity -, -pole 0 A for switch only types 3-pole A (without bimetal) Thermal positively trip free
www.schurter.com/pg_8_9 TA3 Tripping Characteristics [ min ] [ sec ] 0'000 60 Type Rated current TA3 <3A (TC-), pole [ min ] [ sec ] 0'000 60 Type Rated current TA3 >3 0A (TC-) (3 pole, max. A) 30 0 `000 `000 3 pole Ambient temp. +3 C 30 0 `000 `000,,3 pole Ambient temp. +3 C 0 00 0 00 00 00 00 00 0 0 0 0 0 0 0, 0, Tripping time 0,3 0, 0,,0,3 3 8 0 Multiple of rated current [ x In ] Tripping time 0,3 0, 0,,0,3 3 8 0 Multiple of rated current [ x In ] The above tripping characteristics apply to symmetrical overloads on all poles on the TA3 only. At asymmetric overloads on multi-pole types, the tripping characteristic will change. If a -pole type TA3 is loaded at one pole only, the tripping current will be shifted by factor.0 (TC-). If a 3-pole type TA3 is loaded at one pole only, the tripping current will be shifted by factor.0 (TC-). To meet the above tripping characteristic at asymmetric overloads on multi-pole types, the value of the rated current of the CBE has to be multiplied by the factor mentioned above. Effect of ambient temperature The unit is calibrated for an ambient temperature of +3 C. To determine the rated current for lower or higher ambient temperature, use a correction factor from the table below. Ambient Correction factor temperature [ C] -pole -pole 3-pole 30 0. 0.6 0.6 0 0.8 0.8 0.8 0 0.90 0.90 0.90 +3.00.00.00 +0.03.03.06 +0.0.0.0 +60.06.06. Example for -pole type: Rated current at +3 C.0 A Ambient temperature +0 C Correction factor.0 Chosen rated current at +0 C ambient temperature: A x.0 =. A 3
Standard rated currents and typical internal resistance In [A] Ri [W] Z0 0.0 00.0 J0 0. 0.0 J0 0..0 J0.0 0.0 J. 0.30 J0.0 0.8 J. 0. J8.8 0.089 030 3.0 0.09 00.0 0.09 00.0 0.0 060 6.0 0.08 00.0 0.0 080 8.0 0.0 00 0.0 0.009 0.0 0.0086 0.0 0.00 0.0 0.006 60 6.0 0.006 80 8.0 0.00 00 0.0 0.00 unprotected poles (without bimetal). mw Approvals # of poles Rated currents Rated voltage AC Rated voltage DC UL UL 0 0.0 0 A 0 V 3 V 0.0 0 A 0 V 60 V 3 0.0 A Y/0 V UL CSA C. 3 0.0 0 A 0 V 3 V 0.0 0 A 0 V 60 V 3 0.0 A Y/0 V VDE IEC 6093 0.0 0 A 0 V 3 V 0.0 0 A 0 V 60 V 3 0.0 A Y/0 V CQC GB 0 0.0 0 A 0 V 3 V 0.0 0 A 0 V 60 V 3 0.0 A Y/0 V Actual information about approvals can be found on: www.schurter.com/approvals.
www.schurter.com/pg_8_9 TA3 Order Number of switched poles -pole -pole 3-pole Number of protected poles 0 0 0 3 P P P P P3 P P3 8 8 8 9 6 Basic type EFC EFT EBC EBT EBD EKC EKD Other versions on request TA3- EBT T F 0 C0 No other features Frontbezel and actuation knob Bezel Knob T black black N without bezel without knob Without thermal overload protection: code C00 With thermal overload protection: rated current (A) Bezel marking Surface Symbol F relief recessed I 0 N no marking no marking 0.0 Z0 0. J0 0. J0 0.3 J03 0. J0 0. J0 0.8 J08.0 J0. J. J.0 J0. J 3.0 030 3. 03.0 00.0 00 6.0 060.0 00 8.0 080 0.0 00.0 0.0 0 *.0 0 * 6.0 60 * 8.0 80 * 0.0 00 * 0ther rated currents on request. * 3-pole max. A
Dimensions TA3 -pole 9.6 9. 0 3. ø. 0.6 ø 3..6.3.3 6.3 x 0.8 mm. 8..9 33.8 Screw Type: x PT WN3 KA 3 x TA3 -pole 9.6 30. 0 3. ø. ø 3..6 0.6.9.3.3. 6.3 x 0.8 mm 33.8 Screw Type: x PT WN3 KA 3 x TA3 3-pole 9.6. 0 3. ø. ø 3..6 0.6.9.3.3. 6.3 x 0.8 mm 33.8 Screw Type: x PT WN3 KA 3 x 6
www.schurter.com/pg_8_9 TA3 Front bezel/knob Switching angle (38. -.) ø 38 R3 3 8 OFF ON - 3 Cut-out 0 90 0 0 ø 8. Mounting instructions Customer specific bezels/actuator designs possible