0 0 0 0 CUTTER DECK 0 0S00
CUTTER DECK Foot Plate 00-0 Serr. Fl. Hex Nut, /- -0 Grease Fitting Frame, Cutter Deck Support (incl.,,) 00-0 Hex Locknut, Elastic Stop, /- 0 Rod, Deck Prop - L.H. 00- Serr. Fl. Hex Head CPSCRW, /- x /" 000-0 Lockwasher, /" 000- Flatwasher, / (. x. x.0) Guard, U-Joint 00- Hex Locknut, Elastic Stop, /" 000-0 Bolt, Hex Head, /- X -/" 00-0 Flatwasher, / (. x. x.) 00-0 Key, / x / x.00" 0 Drive Shaft 000-0 Bolt, Hex Head, /- x.00" Hinge, Discharge Chute Chute, Cutter Deck 000- Carriage Bolt, /- x /" 0 Cutter Deck With Decals 000- Carriage Bolt, /- x.0" Adapter, Blade Drive Blade, Cutter - L.H. 00- Flatwasher, / (. x.0 x.) 000-0 Lockwasher, /" 000- Bolt, Hex Head, /-0 x -/" Blade, Cutter - R.H. 00-0 Setscrew, Hex Socket, /- x /" Caster Wheel Yoke Assy (Includes 0 thru) 0 Yoke, Caster Wheel 0 Sleeve 00-0 Hex Locknut, Elastic Stop, /- 000- Bolt, Hex Head, /- x -/" 0 Caster Wheel Assembly (Includes thru ) 00-0 Retainer, Caster Wheel 00-0 Roller Bearing, Caster Wheel 0-0 Tapered Hex Nut, /- 0-0 Rim Pair, Caster Wheel 00-0 Hub Assembly with Bolts 0-0 Grease Fitting 0-0 Tire N/S 00-0 Inner Tube Isolator, Rubber 000-0 Retainer Ring,.00" 0-0 Bushing, Oilite,. ID 0 Spacer Mounting Bracket - Front 000- Bolt, Hex Head, /- -/" Gearbox Assembly (Includes A,B And C) A Gearbox, LH B Gearbox, RH C 0 Gearbox, Center Mounting Bracket - Rear 0 Rod, Deck Prop - R.H. Bushing, Cutter Deck Support 00-0 Hairpin, Cotter,. x." 00-0 Quick Pin 000- Carriage Bolt, /- x -/" Bracket, Anti-Rotation 00-0 Washer, Internal Lock 000- Bolt, Hex Head, /-0 x -/" LH Thread Spacer, Cutter Blade * Capscrew, #- x /" 0 * Locknut, #- Elastic Stop 000- Flatwasher, /" (. x.0 x.) 00-0 Locknut, /- * Purchase part Shear Bolt Package to replace these parts. ( of each per package) -NOTE- Some of the hardware is common hardware and you may purchase it locally. Be sure that all bolts purchased locally are a grade.
0 0 0 A 0 0S00 A 0 0 0 SHEET METAL 0 0 0 0 0 0
SHEET METAL Ref. No. Part. Number Description 0 Battery Cover, Battery 000- Carriage Bolt, /- x / Box, Battery 00-0 Wingnut, Plastic, /-0 00-0 Hex Locknut, Elastic Stop, /- 00-0 Flatwasher, / (. x. x.) 00-0 Wingnut, Plastic, /-" 0 Belt Cover, Front 0 Belt Cover, Rear 0 Frame, Right Side 00-0 Serr. Fl. Hex Nut, /-" 00-0 Serr. Fl. Hex Nut, /-" 00- Serr. Fl. Hex Head CPSCR, /- x.00" 00- Serr. Fl. Hex Head CPSCR, /- x -/" 000- Bolt, Hex Head, /- x -/" 000- Carriage Bolt, /- x /" Cross Brace, Frame 000-0 Bolt, Hex Head, /- x -/" 0 00-0 U-Nut 0 Heat Shield, Front 00- Serr. Fl. Hex Head CPSCR, /- x -/" 00-0 Serr. Fl. Hex Nut, /- 00-0 Serr. Fl. Hex Head CPSCR, /-0 x /" Heat Shield, Side Link Frame, Bagger Support Spacer, Wheel Wheel, Bumper 0 000- Bolt, Hex Head, /- x -/" 0 Heat Shield, Top 000- Carriage Bolt, /- x -/" Pivot, Seat Latch 000- Flatwasher, / (. x. x.0) 00- Hex Locknut, Elastic Stop, /- 00- Serr. Fl. Hex Head CPSCR, /- x /" 00-0 Castle Nut,.00"- UNS-B Bearing With Race -0 Grease Fitting 0 000- Bolt, Hex Head, /- x -/" Shield, Engine 00-0 Hex Lock Nut, Elastic Stop, /-0 000- Bolt, Hex Head, /- x.00" 0 Yoke, Rear Caster 00- Hex Locknut, Elastic Stop, /- 000-0 Bolt, Hex Head, /- x.00" 000- Bolt, Hex Head, /- x.00" 000-0 Lockwasher, /" 00-0 Spacer 0 Tire and Wheel Assembly (inlcudes thru ) 00-0 Seal 00-0 Cone, Bearing 00-0 Cup, Bearing -0 Grease Fitting -0 Rim -0 Tire 0 Sleeve, Rear Tire 0-0 Bushing, Oilite,. ID Shaft, Push Arm Mounting 0 Pivot, Pusharm 000- Bolt, Hex Head, /- x -/" 00- Serr. Fl. Hex Head CPSCR, /-x /" 0 Latch, Seat 00 Spring Frame, Left Side Fender, Left With Decal Crossbrace Frame, Main Crossmember, Front 0 00- Serr. Fl. Hex Head CPSCR, /- x /" Spring, Seat 000- Bolt, Special 000-0 Serr. Fl. Hex Head CPSCR, /-0 x /" 00 Actuator, Seat Switch Hinge, Seat 00 Seat Base 000-0 Bolt, Hex Head, /- x /" 000-0 Lockwasher, /" Seat 0 Mounting Brkt. Wlmt., Deck Springs Brace, Bucket Support Hinge, Gearbox Cover 0 Spacer Fender, Right With Decal 000- Carriage Bolt, /- x /" 000-0 Carriage Bolt, /-0 x.00" Pad, Rubber Cover, Gearbox With Decal 0 Bracket, Dump Valve 0 Spring Cover 000-0 Bolt, /- x.00" 0 Spring, Deck Cover, Access Hole 000-0 Bolt, Hex Head /-0 x /" Prop Rod, Hopper 000-0 Carr. Bolt, /- x -/" 0 Washer, Step 0 Bushing,.00 ID x." 00- Nut, /- UNF Elastic Stop 0 000- Flatwasher, / (. x. x.) 00-0 / x /" Ext. Prg. Cotter Pin Cap, Grease Seal,.00" OD x." Bore 00-0 U-Nut, /- -NOTE- Some of the hardware is common hardware and you may purchase it locally. Be sure that all bolts purchased locally are a grade.
0 0 0 0 0 BLOWER ASSEMBLY 0S000
BLOWER ASSEMBLY Ref. No. Part. Number Description Chute, Side Discharge Housing, Blower 00- Hex Locknut, Elastic Stop, /- Outlet, Blower 000-0 Flatwasher, / (. x..0) 00-0 Hex Locknut, Elastic Stop, /-0 000-0 Carriage Bolt, /-0 x /" 00- Key, / x. Woodruff Relief Fitting Pulley,. OD Spacer, Outside 0 Nut, -/- L.H. Seal,.00 OD x.0 Bore Roller Bearing Assembly -0 Grease Fitting 00-0 Hex Locknut, /- 000- Bolt, Hex Head, /- x -/" 00-0 Serr. Fl. Hex Nut, /- 00- Clamp 0 Spring 000-0 Bolt, Hex Head, /- x -/" 00-0 Serr. Fl. Hex Nut, /- 000-0 Hex Nut, /- 000-0 Stud, /- x.00" 0 Knob, Shifter 0 Lever, Blower Gate Joint,Swivel 000- Bolt, Hex Head, /- x.0" 000-0 Lockwasher, /" 0 000-0 Flatwasher, / (.0 x. x.0) 0 Link, Blower Gate Sleeve 00-0 Hairpin, Cotter,.00 x." 0 Mounting Bracket, Discharge Chute 000-0 Retaining Ring,. "E" 000- Carriage Bolt, /- x -/" Gate 0- Bushing, Oilite,.0 ID Washer, Gate Retainer 0 000- Retaining ring,.0 Ext -0 Grease Fitting. Fan, Blower Seal,.00 OD x. Bore 000- Carriage Bolt, /- x /" Front, Blower Housing 000- Bolt, Hex Head, /- x -/" Adapter, Blower Inlet 000- Bolt, Hex Head, /- x -/" 000- Flatwasher, / (. x. x.0) 0 00-0 Hex Locknut, Elastic Stop, /- 000- Nut, Jam, /- Grip Spindle Bushing, Bottom Spacer, Inside -NOTE- Some of the hardware is common hardware and you may purchase it locally. Be sure that all bolts purchased locally are a grade.
ENGINE AND ATTACHING PARTS PART OF ENGINE 0 PART OF ENGINE 0 PART OF ENGINE 0S00
ENGINE AND ATTACHING PARTS Guard, Muffler Muffler Clamp, Muffler Exhaust Pipe, Flexible Relay 000-0 Lockwasher, / 00-0 Machine Screw, Round Head, /-0 x /" -0 Clamp,. Dia Hose, Air Intake Pipe Ext., Air Cleaner Mounting Brkt., Air Cleaner 00- Serr. Flange HexHead, CPSCR, /- X /" Guard, Muffler Precleaner, Air Intake Cap, Fuel Tank, with Gauge Strap, Fuel Tank - Rear 000-0 Hex Head Bolt, /- x.0" 00- Hex Locknut, Elastic Stop, /- 000-0 Carriage Bolt, /- x.00" 0 00- Clamp 000-0 Flatwasher, / (. x. x.0) 000-0 Lockwasher, /" 00-0 Hex Locknut, Elastic Stop, /- Strap, Fuel Tank - Front Fuel Tank (Includes ) 0 Valve, Fuel Shut Off 0-0 Clamp, Hose 0 Fuel Hose -0" Long (Order Length) Engine, Kohler - 0 HP (0CH) Engine, Kohler - HP (CH) 0 000- Bolt, Hex Head, /- x -/ Manifold, Exhaust 00-0 U-Nut 00- Machine Screw, Round Head, /-0 x.00" 00-0 Capscrew, Socket Head, #- x /" 000- Hex Head Bolt, /- x." - Clamp, Hose.0" Rubber Pad -NOTE- Some of the hardware is common hardware and you may purchase it locally. Be sure that all bolts purchased locally are a grade.
TRACTION DRIVE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0S00 A B C
TRACTION DRIVE 000- Bolt, Hex Head, /-0 x -/" Pulley,. OD Belt, Main Drive Hub, Tapered 00-0 Key, / x / x -/" 000- Bolt, Hex Head, /- x -/" GRD 00- /" Flatwasher (. x.00 x.0) 000- Bolt, Hex Head, /- x /" 0 Pulley, Idler -. Dia. 0 Brace, Gearbox 0 Spacer, Bearing 00-0 /- Hex Lock Nut 000- Bolt, Hex Head, /- x /" GRD Bearing Arm, Idler Spacer, J-Pull Rod 000- Bolt, Hex Head, /- x -/" 000- Bolt,Hex Head, /- x /" 000-0 Lockwasher, /" 0 000- Stud, /- x.00" 00-0 Hex Locknut, Elastic Stop, /- 00- Elastic Stop Nut, /- Pivot, Engine Idler Spring, Main Drive 00-0 Serr. Fl. Hex Nut, /- Pulley, Idler Hub, Tapered,.00 Bore 00-0 Key, / x / x -/" Gearbox, T-Drive 0 Pulley,. OD Double Groove 0 Rod, J-Pull Spacer, Idler Adjust Pulley 00- Flatwasher, / (. x.0 x.0) 000- Carrige Bolt, /- x -/" Belt, R.H. Transmission Drive Belt, L.H. Transmission Drive Hub, Tapered, mm 000- Bolt, Hex Head, /- x -/" 0 000- Bolt, Hex Head, /- x -/" 000-0 Lockwasher, /" 00-0 Serr. Fl. Hex Head CPSCR, /-0 x /" Pump, L.H. Axle, L.H 000- Bolt, Hex Head, /- x.0 GR A Wheel Assembly, Drive B -0 Tire Only C -0 Rim Only 00-0 Nut, Wheel 0 Back-up Washer, Fan 000- Bolt, Hex Head, /- x -/" 0 Pulley,. OD Fan, Cooling LH 000- Bolt, Hex Head, /- x -/" 000-0 Flatwasher, / (. x. x.0) 00- Key, mm x mm x mm Pump, R.H. Axle, R.H. 000-0 Hex Nut, /- 0 Spacer 000- Bolt, Hex Head, /- x -/" 0 000- Bolt, Hex Head, /- x -/" Fan, Cooling RH 00-0 Flatwasher, / USS GR Washer, Heat Deflector 00- Socket Head Capscrew, /-0 x -/" 000-0 Lockwasher, / Spring, Hardened 00- Lock Nut /- Elastic Stop GR Beraing Idler Pulley 000-0." TruarcRing Spacer 0 00-0 Flatwasher, / (.x.x.) 00- Clamp,. ID 000- Hex Head Bolt, /- x /" Bracket, Idler Adjust -NOTE- Some of the hardware is common hardware and you may purchase it locally. Be sure that all bolts purchased locally are a grade.
HYDRAULIC PUMP 0 0 OVERHAUL SEAL KIT 0 0S00
HYDRAULIC PUMP No. Number Description - Pump, L.H. (Includes items thru 0) - Pump, R.H. (Includes items thru 0) HG Pump Shaft Kit HG000 Wire Retaining Ring HG000 Ball Bearing HG000 Spacer HG00000-0 Lip Seal ( x x ) HG000 Retaining Ring HG000 Cradle Bearing HG00000-0 Lip Seal ( x x ) HG0000 Trunnion Arm HG0000 Slot Guide HG0 Transmission Housing Kit (L.H.) HG0 Transmission Housing Kit (R.H.) HG000 Thrust Ball Bearing Assembly HG00000-0 Lip Seal ( x x ) HG000 Motor Shaft HG000 Block Thrust Washer HG000 Variable Swash Plate HG00 BDT-L Block Assembly HG0000-0 Pin ST Holder HG0 Center Section Kit 0 HG0 Check Valve Kit HG0 Charge Relief Kit HG00-00 Socket Head Capscrew HG Bypass Valve Kit HG00- O-Ring HG Charge Pump Cover HG0 Gerotor Assembly HG00 Capscrew (mm x 0) HG0000 Center Section Gasket HG Overhaul Seal Kit 0 HG0000 Spring Block
HYDRO-GEAR AXLE ASSEMBLY 0 BRAKE ASS'Y. FOR MODEL # BRAKE ASS'Y. FOR MODEL # 0 0 0S00
HYDRO-GEAR AXLE ASSEMBLY - Axle, L.H. (Includes Items thru ) - Axle, R.H. (Includes Items thru ) HG Axle Housing Assembly HG Hydro Mount Housing HG Splined Final Gear Drive HG Axle Shaft Assembly HG Bolt, /-0 x -/ Hex Head HG E-Ring HG0 Oil Seal,. x." HG Ball Bearing,. ID x. x." HG Washer, HT. ID x.0od x.0 Thick HG Brake Shaft (Splined) HG0 Splined Reduction Gear, Tooth HG00 Splined 0 Tooth Gear HG00 Disc, Brake HG00-00 Ball, / Diameter HG0 Gasket, Housing HG Pin, Spring, / z / x / Long HG Mounting Spacer HG Bearing, Spacer HG0 O-Ring 0 HG Ball Bearing, mm x mm x mm HG Input Gear, Tooth HG Retaining Ring HG Key, HI Pro / x /" HG Puck, Brake HG Plate, Puck HG0 Brake Spacer HG Brake Yoke Assembly HG Bolt, /-0 x -/ Hex Head HG Washer, / x / OD x.0 HT 0 HG Nut, Castle, /- PL HG Pin, Cotter HG Pin, Brake Actuating HG0 Arm, Brake Actuator (L.H. Assembly) HG Arm, Brake Actuator (R.H. Assembly) HG Bolt, /-0 x -/ Hex Head HG Spacer
DRIVE GEARBOX A A 0S00 - Gearbox, Drive SGC0 Capscrew, Socket Head, /- x -/" SGC0000 Plug, Socket Head Plug, Dipstick SGC0000 Casting, Upper SGC000000 Shaft Assembly, Cross SGC0 Seal - " SGC0000 Shaft Assembly, Pinion SGC0000 Seal, -/" x -/" x /" SGC00000 Retaining Ring SGC00000 Cup, Retaining Ring SGC0000 Casting, Lower
GEARBOX ASSEMBLY () 0S0 0 Gearbox, Center Gearbox, LH SGC0000 Shaft Assembly SGC0000 O-Ring,. x.00 SGC00000 Bolt, /- x." Socket Head Cap Srew SGC0000 Nut, /- SGCMD00000 Separator, Air/Oil SGC0000000 Pin, Spring / x.0" SGCMD0000000 Coupling SGCMD0000000 Cover, Short SGCMD000000 Cover, Long Gearbox, RH
GEARBOX ASSEMBLY (0) 0S0 SGC00000 Casting, Lower (Threaded Holes) SGC0000 Casting, Upper (Non-Threaded Holes) SGC0000 Shaft / Pinion Assembly SGC0000 Shaft Assembly-Cross/Gear SGC Seal.00 x.0 x /" SGC0000 Plug, / NPT Socket Head SGC Bolt, /- x. SGCMD00000 Separator, Air/Oil
GEARBOX ASSEMBLY (-LH & -RH) A 0S0 SGC0000 Shaft/Pinion Assembly Assembly, Shaft-Cross-(Used in LH Gearbox) A Assembly, Shaft-Cross-(Used in RH Gearbox) SGC0000 Casting, Bottom (Threaded Holes) SGC0000 Casting, Top (Non-threaded Holes) SGC Seal.00 x.0 x /" SGC Plug, /" NPT Socket Head SGC0000 Plug, /" NPT Socket Head SGC Bolt, /- x. SGC00 Assembly, End Plug- PSI
0 0 0 0 0 0S00 DECK DRIVE
DECK DRIVE No. Number Description 00-0 Serr. Fl. Hex Nut, /- 0 Spacer J-Pull Rod Pulley, Idler Idler Arm, Auxiliary Drive 00-0 /-, Hex Lock Nut 000- Bolt, Hex Head, /- x -/" GRD Spring, PTO Drive 00-0 Flatwasher, / (. x. x.) Spring Anchor 000-0 Retaining Ring,. "E" Spacer 000- Bolt, Hex Head, /- x /" GRD 000- Carr. Bolt, /- x /" 0 Pivot, Auxiliary Drive Idler 00- Elastic Stop Nut, /- 000-0 Bolt, Hex Head, /- x.00 00-0 Serr. Fl. Hex Nut, /- Base, Clutch Anti-Rotation 000- Flatwasher, /" 0 Isolator, Rubber 000-0 Lockwasher, /" 000- Bolt, Hex Head, /-0 x -/" Belt, Blower Drive 00- Socket Head Capscrew, /-0 x -/" Pulley,. OD Hub, Tapered 000-0 Bolt, Hex Head, /- x -/" Spindle Assembly, Drive Shaft (includes thru ) Nut,.0-0 Spindle Bushing, Bottom Seal,.00 OD x. Bore Roller Bearing Assembly Spacer, Outside Spacer, Inside -0 Grease Fitting Spindle Housing Shaft, PTO Deck Drive Seal,.00 OD x.0 Bore 00-0 Key, / x / x -/" 0 Bearing Electric Clutch 000-0 Lockwasher, /" 000-0 Carr. Bolt, /- x.00" 00-0 Elastic Stop Nut, /- 000-0 Lockwasher, /" 000-0 Nut, /- -NOTE- Some of the hardware is common hardware and you may purchase it locally. Be sure that all bolts purchased locally are a grade.
0 0 0 0 0S00 0 0 0 0 0 0 SPEED AND STEERING CONTROLS 0 0 0
SPEED AND STEERING CONTROLS Knob 000-0 Hex Nut, /- Lever, Speed Control Disc, Friction Mounting, Plate, Speed Selector 000- Bolt, Hex Head, /- x -/" 000- Bolt, Hex head, /- x -/" 000-0 Lockwasher, /" 0 Spacer, Speed Control Mounting Plate, Speed Control 000-0 Bolt, Hex Head, /- x /" 000- Flatwasher, / (. x. x.0) Bushing, Self-Aligning 00- Hex Locknut, Elastic Stop, /- Mounting Plate, Left Bearing 000-0 Ring, Retaining,." 0 Bushing, Oilite,." ID Lever, L.H. Speed Control -0 Grease Fitting 0 0 Spring 000- Bolt, Hex Head, /- x -/" 00-0 Serr. Fl. Hex Nut, /- 00-0 Flatwasher, / (. x. x.) 000- Bolt, Hex Head, /- x.0" 00- Capscrew, Socket Head, /-0 x /" 00-0 Hex Locknut, Elastic Stop, /-0 000-0 Roll Pin 000- Bolt, Hex Head, /-0 x -/" 000-0 Lockwasher, /" 0 000-0 Flatwasher, / (. x. x.0) Block, Pump Control 0 Clamp Plate, Pump Control Plate, Coupler 00-0 Serr. Fl. Hex Head CPSCRW, /-0 x /" 00- Serr. Fl. Hex Head CPSCRW, /- x -/" 0 Arm, R.H. Pump Control Stop, Pump Arm 00-0 Hex Locknut, /- 00-0 Hex Locknut, Elastic Stop, /- 0 Ball Joint, /- R.H. Thread 000- Hex Nut, /- R.H. Thread 0 Link 000- Hex Nut, /- L.H. Thread Rod End, /- L.H. Thread Sleeve 000-0 Bolt, Hex Head, /- -/" 00- Key, / x / Woodruff Shaft Speed Control 000- Bolt, Hex Head, /- x -/" 0 Rod End, /- R.H. Thread Spacer 000- Hex Nut, /- R.H. Thread Link, Adjust-LH 000- Hex Nut, /- L.H. Thread Rod End, /- L.H. Thread Control Lever -0 Grease Fitting, 0 000- Bolt, Hex Head /- x /" Spring, Handle Return 0 Handle, Control 0-0 Bushing, Oilite,. ID -0 Grease Fitting 0 Lever, L.H. Control 0 Lever, R.H. Control Link, R.H. Adjustment Grip, Hand Control Lever, Speed Control 00-0 Setscrew, Socket Head, /-0 x/" Link, Speed Control 0 Link 000- Bolt, Hex Head, /- x -/" Plate, Speed Selector 00- Hex Locknut, Elastic Stop /- 0 Lever, R.H. Speed Control 0 Spacer Arm, L.H. Pump Control 00-0 Washer, Belleville, /" 00-0 Serr. Fl. Hex Nut, /- 00- Clamp,. Dia 0 000- Hex Head Bolt, /- x.0" -NOTE- Some of the hardware is common hardware and you may purchase it locally. Be sure that all bolts purchased locally are a grade.
PARKING BRAKE AND DUMP VALVE LINKAGES 0 0 STR0
PARKING BRAKE AND DUMP VALVE LINKAGES 0 Lever, Dump Valve 00-0 Hairpin Rod, Brake - L.H. 000- Hex Nut, /- -0 Clevis 00- Pin, Clevis, / x /" 000-0 Bolt, Hex Head, /- x -/" 000-0 Lockwasher, /" 00-0 Flatwasher, / (. x. x.) 0 Actuator, Brake 000- Ring, Retainer Mounting Bracket, Dump Valve 0 Cable Assembly, Parking Brake 00-0 Serr. Fl. Hex Nut, /- 00- Serr. Fl. Hex Head CPSCR, /- x.00" 000-0 Carriage Bolt, /-0 x /" Bracket, Dump Valve Lever 00-0 Serr. Fl. Hex Nut, /-0 Rod, Brake - R.H. 0 0 Spring 0 Lever, Parking Brake 00 Spring, Control Detent 000- Bolt, Hex Head, /- x -/" 00-0 Hex Locknut, Elastic Stop, /- 0 Spacer Grip, Parking Brake Lever 0 Latch, Brake Lever 00- Serr. Fl. Hex Head CPSCRW, /- x /" 0 Swivel Joint 0 000- Bolt, Hex Head, /-0 x -/" 00-0 Serr. Fl. Hex Nut, /-0 -NOTE- Some of the hardware is common hardware and you may purchase it locally. Be sure that all bolts purchased locally are a grade.
HYDRAULIC COMPONENTS AND LINES 0 A STR0
HYDRAULIC COMPONENTS AND LINES Cap, Hydraulic Reservoir Fill 0 Tank, Hydraulic Oil -0 Cap, -- JIC -0 Tee, /- JIC x O-Ring Hose Assembly, Filter Inlet 0-0 O-Ring, / x / ID -0 Union, Tube Hose Assembly, Case Drain 00-0 Serr. Fl. Hex Head CPSCRW, /-0 x /" 0-0 O-Ring, / x / ID 0-0 Elbow, 0 JIC to O-Ring -0 Element, Filter A -0 Head, Filter Hose Assembly, L.H. Charge Pump 0- Elbow, 0 /- JIC to /-0 O-Ring 0-0 O-Ring, / x / ID -0 Tee, /- Swivel Hose Assembly, Case Drain Return Strap, Hydraulic Tank 00-0 U-Nut 0 00- Machine Screw, Round Head, /-0 x.00" 00- Clamp, Cable 000-0 Lockwasher, /" 000- Bolt, Hex Head, /- x /" Pump, R.H. Pump, L.H. Hose Assembly, RH Charge Pump 0 Insert, Filler Neck Rubber Pad -NOTE- Some of the hardware is common hardware and you may purchase it locally. Be sure that all bolts purchased locally are a grade.
0 0S000 0 TO HOPPER HARNESS ELECTRICAL SYSTEM 0 A A
ELECTRICAL SYSTEM No. Number Description Harness, Engine 0 Hourmeter Fuse, 0 Amp 0-0 Key & Ring Assembly 0-0 Nut, Hex, /- 0-0 Lockwasher, / Internal Instrument Panel, Top With Decal Keyswitch Switch, Mower Engagement Electric Clutch Relay 00-0 Lockwasher, # External Tooth 00-0 Hex Locknut, Elastic Stop, #- 0 Ammeter Base, Instrument Panel 000-0 Lockwasher, /" 000-0 Bolt, Hex Head, /-0 x /" 00-0 U-Nut Throttle and Choke Controls 00-0 Screw, Washer Round Head, #- x /" 0-0 Nut, Hex, /- Switch, Interlock - Seat Switch, Interlock - (Neutral and Hopper) 000- Bolt, Hex Head, /-0 x /" 0- Cable, Battery - Red 000-0 Nut, Hex, /-0 0- Cable, Battery - Black 00- Clamp, Double Cable 00- Clamp, Cable 00- Hex Locknut, Elastic Stop, /- 0 00-0 Hex Locknut, Elastic Stop, #- Bracket, Fuse Holder 00- Screw, Round Head, #- x -/" 00-0 Lockwasher, External Tooth, / 000- Bolt, Hex Head, M-. x 0 Relay and Harness (incl. item 0) 000-0 Lockwasher, / 000- Bolt, Hex Head, M-. x 0-0 Nylon Sleeve, " Wire Harnes, STR 0 Relay -NOTE- Some of the hardware is common hardware and you may purchase it locally. Be sure that all bolts purchased locally are a grade.
0 0 0 0 0 0 0 0 HOPPER 0S00 SWITCH
HOPPER Frame, Hopper Door Bumper, Rubber 00-0 Serr. Fl. Hex Nut, /- 00 Retainer, Screen 0 Guard, Latch 00-0 Serr. Fl. Hex Head CPSCR, /-0 x.00" Latch, Hopper Door 00- Flatwasher, / (. x.00 x.0) Door, Hopper Handle 000-0 Pop Rivet, / x." 00-0 Hex Locknut, Elastic Stop, /-0 000- Flatwasher, / (.. x. x.0) 00- Flatwasher, / (. x. x.0) 00-0 Rivet, Lok Bolt, / x." 00-0 Serr. Fl. Hex Nut, /-0 000-0 Carriage Bolt, /-0 x.00 000-0 Bolt, Hex Head, /- x -/ 00-0 Flatwasher, / (. x. x.) 0 Sleeve 000-0 Carriage Bolt, /-0 x -/" Boss, Centering Support, Door - Inside Support, Hopper - Top 00-0 Hex Locknut, Elastic Stop, /- Support, Hinge (L.H. Shown) Support, HInge (R.H. Not Shown) Spring, Hopper Door 000-0 Carriage Bolt, /-0 x /" 000- Bolt, Hex Head, /-0 x." 0 0 Bushing 000-0 Bolt, Hex Head, /- x /" Shield, Hopper 00- Hex Locknut, Elastic Stop, /- Tab, Centering 0 Spacer Lever, Hopper Switch 00-0 Clamp, Cable -.0" 000- Bolt, Hex Head, /- x -/" Strap, Hopper Stop 0 00-0 Serr. Fl. Hex Nut, /- Insulation, Hopper - Rear 000- Flatwasher, / (. x. x.0) 00- Locknut, /- Elastic Stop 0 Insulation, Hopper - R.H. Mount, Transition Chute - Side 0 Mount, Transition Chute - Rear Chute, Transition Anchor, Spring 0 Bar, Clamp 0 Hopper Plate U-Bolt, /- Guide, Screen - Upper L.H. Spring, Switch 00-0 Screw, Round Head, #- x /" 00-0 Lockwasher, External Tooth, # 000-0 Hex Nut, # Screen Stop -0 Trim Seal 0 0 Guide, Screen - Upper R.H. Screen 00- Bolt, Hex Head /- x /" -0 Wingnut, Plastic Frame, Hopper Spring, Switch Lever 000- Hex Head Bolt, /- x.0" Door Assy, Hopper Spring, Torsion -NOTE- Some of the hardware is common hardware and you may purchase it locally. Be sure that all bolts purchased locally are a grade.
HOPPER ACTUATOR MECHANISM 0 STR00
HOPPER ACTUATOR MECHANISM Motor, Actuator 00-0 Capscrew, Sockt Head, #- x /" 00-0 Washer, External Cap, Plastic 00-0 Hex Locknut, Elastic Stop, #- Lever, Actuator 00- Hex Locknut, Elastic Stop, /- Rod End, /- R.H. Thread 000- Flatwasher, / (. x. x.0) 000- Hex Nut, /- Bushing, Nylon Connecting Rod Spring, Connecting Rod 000- Bolt, Hex Head, /- x.00" 000- Bolt, Hex Head, /- x -/" 00-0 Capscrew, Socket Head, #- x -/" 000- Retainer Ring 0-0 Bushing, Oilite,.0 ID -0 Grease Fitting 0 000-0 Bolt, Hex Head, /- x /" Chute Actuator Mount Wire Harness, Hopper 00-0 Serr. Fl. Hex Head CPSCR, /-0 x /" 00-0 Clamp, Cable, /" 00-0 Serr. Fl. Hex Nut, /-0 Pivot, Elbow Seal, Hopper Elbow 000-0 Body Bolt, /- x." -NOTE- Some of the hardware is common hardware and you may purchase it locally. Be sure that all bolts purchased locally are a grade.
R R REPLACEMENT DECALS AND INFORMATION PLATES DANGER SPINNING BLADE KEEP CLEAR CONTACT CAN INJURE 0 WARNING ROTATING BLADES AND BELTS KEEP HANDS, FEET & CLOTHING CLEAR KEEP ALL GUARDS IN PLACE SHUT OFF ENGINE & DISENGAGE BLADE CLUTCH BEFORE SERVICING CLEAR AREA OF DEBRIS BEFORE MOWING USE CAUTION IN DIRECTING DISCHARGE KEEP BYSTANDERS, CHILDREN & PETS AWAY READ INSTRUCTION MANUAL BEFORE OPERATING DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING KIT, OR ENTIRE GRASS CATCHER INSTALLED 0 HEAVY DUTY COMMERCIAL 0 0 MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING PATENTS:,,00,,,,0,,,0,,,,, PATENTS PENDING DANGER ROTATING BLOWER BLADES CAUTION AVOID INJURY FROM BURNS. SHUT OFF ENGINE BEFORE REMOVING FUEL TANK CAP. CUTTING HEIGHT ADJUSTMENT -/ -/ -/ CUTTING HEIGHT INCHES CHOKE SLOW R FAST CAUTION THROWN OBJECTS USE CAUTION IN DIRECTING DISCHARGE DANGER ROTATING BLOWER BLADES STOP ENGINE BEFORE ENTERING CHUTE CONTACT CAN INJURE DRIVE DUMP VALVE STOP ENGINE BEFORE ENTERING CHUTE CONTACT CAN INJURE FAST PARKING SPEED BRAKE SELECTOR SLOW N NEUTRAL RELEASE PARKING BRAKE FREE SELECT SPEED WITH SELECTOR HANDLE CAUTION SELECT FORWARD OR REVERSE WHEEL BEFORE OPERATING DIRECTION WITH HYDRO READ OPERATINGS CONTROL HANDLES MANUAL AND SAFETY INSTRUCTIONS 0 OFF ON START / DRIVE PROCEDURE ENGAGE PARKING BRAKE DISENGAGE MOWER DECK DRIVE MOVE SPEED SELECTOR HANDLE TO NEUTRAL POSITION START ENGINE PULL UP AND PUSH FORWARD TO ENGAGE OFF MOWER DECK ON ON START MOWER DECK OFF CAUTION PULL BACK TO DISENGAGE KEEP BYSTANDERS AWAY 0S00
R REPLACEMENT DECALS AND INFORMATION PLATES 0 Decal, Danger - Spinning Blades 0 Decal, Warning - Rotating Blades 0 Decal, Heavy Duty Commercial 0 Decal, Metalcraft - Made in USA Decal, Patent Decal, Decal, Scag Decal, Danger - Rotating Blower Blades Decal, Fuel Tank Decal, Caution/Danger - Thrown Objects Decal, Instrument Panel - Upper Decal, Cutting Height Decal, Instrument Panel - Lower 0 Decal, Dump Valve Decal, R.H. Fender Decal, Seat Base Decal, Grease Points IMPORTANT ADJUSTMENT PROCEDURES F G A READ OPERATOR'S MANUAL FOR MORE DETAILS Check tire pressure - ( Drive tires - PSI, All others - PSI ) NEUTRAL ADJUSTMENT. Adjust distance ( B ) from LH ball j oint to pivot to - / ". J D H Speed control lever. Loosen jam nuts (D & E). With an operator in the seat, engine running, speed control lever in neutral and the parking brake disengaged-rotate turn buckle (H) until the machine begins to creep forward on RH side. Back of / turn, tighten jam nuts ( D & E ). Repeat for lh side, leave jam nuts ( F & G ) loose for step #.. Move the speed control lever so the machine creeps forward. If the machine pulls to the left, rotate turnbuckle ( J ) CCW. If the machine pulls to the right, rotate turnbuckle ( J ) CW. Return to neutral with keyswitch off. Tighten jam nuts ( F & G ). TRACKING ADJUSTMENT HYDRAULIC TANK FLUID LEVEL Check hydraulic fluid level daily while fluid is cool. Fluid level should be -/" below top of filler neck. Fill with SAE 0W0 motor oil only. IMPORTANT!: Do not overfill. Room for hot fluid expansion must be allowed or resulting expansion may cause leaks in the system. ALL gearbox Lubricant: Mobil SHC0 Right transmission belt adjusting nut Loosen nut before adjusting belt. Tighten after the belt is adjusted. -/" B E If the machine does not track straight through all speeds, loosen nut (A) on LH pump linkage. If the machine pulls to the right, move outward in slot to slow wheel. If the machine pulls to the left, move inward in slot to speed up left wheel. Re-adjust neutral starting with step #. Left transmission belt adjusting nut GREASE FITTING LUBRICATION LUBRICANT / INTERVAL LITHIUM MP WHITE GREASE 0 HOURS / WEEKLY CHASSIS GREASE 0 HOURS / BI - MONTHLY CHASSIS GREASE 00 HOURS / MONTHLY LEFT SIDE IMPORTANT GREASE BLOWER BEARINGS WEEKLY LITHIUM MP WHITE GREASE BLOWER BEARINGS UNDER SEAT RIGHT SIDE
SEAT SWITCH + - GRN INSTRUMENT PANEL HOURMETER CUTTER DECK SWITCH KEY SWITCH AMMETER ELECTRIC CLUTCH NEUTRAL SWITCH HOPPER SWITCH HOPPER BATTERY RELAY FORWARD ENGINE ADAPTER GROUND SOLENOID STARTER ENGINE FUSES 0 AMP + - + - RED RED RED BLU BLU BLU GRN WHT GRN RED GRN RED RED WHT GRN WHT YEL BLU BLU ENGINE HARNESS RED RED YEL WHT YEL GRN WHT RED ELECTRICAL SCHEMATIC RED YEL RED YEL RED YEL YEL 0S00 RED WHT BLU RED RED WHT WHT WHT GRN YEL RED YEL GRN WHT RED GRN BLU RELAY