6.1 Protected 6.1 6.2 6.2 PPF1 PPF3 PPF4 PPF13 6.3 6.3 6.4 6.4 PPF11 PPF6 PPF5 PPF7 6.5 6.5 6.6 6.6 PPF8 PPF9 PPF10 PPF12 6.7 6.7 PPF14 1.9 1.9 1.10 1.10 1.11 1.11 1.12 1.10 Namibia- Pg 6
PPF1 Pluto vapourproof PPF1-236 1280 170 95 2x36w T8 PPF1-258 1580 170 95 2x58w T8 /DIMECG - Electronic dimmable control gear /EMG - Emergency gear Made of injection moulded, self extinguishing, UV stabilised polycarbonate Impact resistant diffuser of 1.2mm thickness Quick fitting mechanical brackets Steel tees for suspended use L.O.R 76.0% PPF3 Body and diffuser made from UV stabilised polycarbonate Venus vapourproof PPF3-118 660 100 94 1x18w T8 PPF3-218 660 150 94 2x18w T8 PPF3-136 1270 100 94 1x36w T8 PPF3-236 1270 150 94 2x36w T8 PPF3-154 1574 100 94 1x54w T5 PPF3-254 1574 150 94 2x54w T5 PPF3-158 1574 100 94 1x58w T8 PPF3-258 1574 150 94 2x58w T8 /DIMECG - Electronic dimmable control gear /SS - Switch start control gear (T8 only) /EMG - Emergency gear Namibia- Pg 6.1
PPF4 Opaque polycarb body Transparent UV stabilized ploycarbonate Diffuser Polycarbonate or stainless steel clips Mars vapourproof PPF4-118 664 90 90 1x18w T8 PPF4-218 664 140 90 2x18w T8 PPF4-136 1274 90 90 1x36w T8 PPF4-236 1274 140 90 2x36w T8 PPF4-158 1574 90 90 1x58w T8 PPF4-258 1574 140 90 2x58w T8 PPF4-128 1274 90 90 1x28w T5 PPF4-228 1274 140 90 2x28w T5 PPF4-154 1274 90 90 1x54w T5 PPF4-254 1274 140 90 2x54w T5 PPF4-135 1574 90 90 1x35w T5 PPF4-235 1574 140 90 2x35w T5 PPF4-149 1574 90 90 1x49w T5 PPF4-249 1574 140 90 2x49w T5 /DIMECG /SS /EMG - Electronic dimmable control gear - Switch start control gear (T8 only) - Emergency gear PPF13 Acciaio PPF13-236 1254 170 88 2x36w T8 PPF13-258 1554 170 88 2x58w T8 Heavy duty industrial vapour proof with a high resistance to aggressive chemical agents Clear tempered glass diffuser The fitting includes electronic ballast: - Complies with: EN 60929 - Operating temp. -25º 70º - Max. Temp.: 80º - Correct positioning of tubes is controlled by a guide rail Snap on ceiling brackets allow for easy track and ceiling installation IP66 Pg 6.2 Namibia-
PPF11 Saturn vapourproof PPF11-36 1300 200 95 2x36w T8 PPF11-58 1300 200 95 2x58w T8 Exterior/Interior vapourproof ideal for coastal areas The body is made in 304 stainless steel with a tempered glass diffuser Comes complete with cable gland Sealed using a silicon gasket and stainless steel clips Includes electronic ballast Can be installed on normally flammable surfaces Class 1 IP 65 PPF6 Orion Zone 1 & 2 PPF6-218 790 219 135 2x18w T8 PPF6-236 1370 219 135 2x36w T8 PPF6-258 1670 219 135 2x58w T8 This luminaire range has a deep drawn stainless steel body, single piece pressed frame and stainless steel clips. The 4mm thick lens is clear armour plate glass. /EMG - Emergency gear (36w only) For use in zone 2, 21 and 22 areas Body construction of single piece deep drawn 304 stainless steel 4mm thick tempered glass lens G13 lamp holders to allow use of standard 26mm lamps Namibia- Pg 6.3
PPF5 Jupiter Zone 1 & 2 PPF5-218 794 176 145 2x18w T8 PPF5-236 1400 176 145 2x36w T8 PPF5-258 1704 176 145 2x58w T8 Fluorescent hazardous area luminaires designed for continuously explosive areas. /EMG - Emergency gear(36w and 58w only) /IS - Isolating switch For use in zone 1, 2 areas Body of DMC glass fibre reinforced polyester compression moulded Standard cable entry with Exe compression gland. G13 lamp holders to allow use of standard 26mm lamps PPF7 Neptune Zone 2, 21 & 22 PPF7-218 700 172 115 2x18 T8 PPF7-236 1310 172 115 2x36 T8 PPF7-258 1610 172 115 2x58 T8 This luminaire range has a flame retardant body, polycarbonate injection moulded lens with linear prisms, with stainless steel clips. /EMG - Emergency gear(36w only) For use in zone 2, 21 and 22 areas DMC flame retardant glass fibre reinforced body Polycarbonate diffuser G13 lamp holders to allow use of standard bi-pin lamps Pg 6.4 Namibia-
PPF8 Galaxy Zone 1 bulkhead Code L H Lamp PPF8-100 354 193 100w GLS max Protected bulkhead made with a die cast aluminium base and glass lens held firmly against the silicone gasket by means of the galvanised wire guard. The E27 Lampholder is rated Exd For use in zone 1 Die cast aluminium base Glass diffuser IP54 PPF9 Die cast aluminium lampholder assembly May be installed in zone 2 areas Explosion Protection: Ex n II T3 DIP IP66 Anti-vibration device on lampholder Sun Zone 2 Hi-bay Code H Dia Lamp PPF9-250MV 570 485 1x250w M.V PPF9-400MV 570 485 1x400w M.V PPF9-250MH 570 485 1x250w M.H PPF9-400MH 570 485 1x400w M.H PPF9-250HPS 570 485 1x250w H.P.S PPF9-400HPS 570 485 1x400w H.P.S Gear housing made from DMC glass fibre reinforced polyester, High purity bright anodised spun aluminium reflector incorporates a heat tempered armour plate glass carried in a silicone seal. Spun into the reflector to form an integral unit Namibia- Pg 6.5
PPF10 Special tool for opening(order seperatly) Vandal resistant round head screws 4mm impact resistant lens Night light option available Prison tamper proof PPF10-211 365 222 95 2x11w CFL PPF10-118 695 222 95 1x18w T8 PPF10-218 695 222 95 2x18w T8 PPF10-136 1305 222 95 1x36w T8 PPF10-236 1305 222 95 2x36w T8 PPF10-158 1605 222 95 1x58w T8 PPF10-258 1605 222 95 2x58w T8 /EMG - Emergency gear /SS - Switch start control gear /NL - Night Light (9w compact fluo) PPF12 Prison tamper proof PPF12-218 740 200 115 2x18W G23 PPF12-218NL 740 200 115 2x18W/1x9W G23 PPF12-36 1340 200 115 36W G23 PPF12-236 1340 200 115 2x36W G23 PPF12-236NL 1340 200 115 2x36W/1x9W G23 PPF12-58 1640 200 115 58W G23 PPF12-258 1640 200 155 2x58W G23 PPF12-236NL 1640 200 155 58W/1x9W G23 Manufactured from cold rolled sheet metal of minimum thickness 0.8 mm gauge. Tested to IP 66 before drilling mounting holes, and cable entry. This range of light fi ttings has been tested as complying with SABS/IEC 60598 the Safety specification and is marked as such. Pg 6.6 Namibia-
PPF14 Rampa PPF14-126 260 12 12 1x26w CFL PPF14-226 460 15 13 2x26w CFL PPF14-128 1230 12 12 1x28w T5 PPF14-154 1230 12 12 1x54w T5 Triangular shaped for direct lighting. Suitable for an array installation. High IP and IK rating (IP65, IK10). Extremely resistant even under the most severe weather conditions. Namibia- Pg 6.7