3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 PD3PCLWH Table/Floor Lamp Dimmer Catalog Number Manufacturer Description Weight per unit Product Category PD3PCLWH Caseta Wireless For Led, CFL, or Halogen Lights 0.3000 (lbs/each) Lighting Dimmers Features amperage rating 1.6 A connection Plug dimmable Dimmable Input Current.37 A@120 V to.16 A@277 V Lamp Type LED 0 Material Plastic/Metal Poles 1 PH Power Factor greater than.90 for loads greater than 25 W Voltage Rating ELBOW FITTING, 316 STAINLESS STEEL MATERIAL; 1/2 INCH SIZE A; 1/2 INCH SIZE B;.5 SIZE A - DECIMAL;.5 SIZE B - DECIMAL; 1/2 SIZE A - FRACTIONAL; 1/2 SIZE B - FRACTIONAL; NUCLEAR, PHARMACEUTICAL INDUSTRY CHEMICAL, PETROCHEMICAL APPLICATION; CAST PROCESS Wattage 5 to 40 W Dimensions and Weight Height Length Size Width Descriptions Description Long Description Product Type special features 1 in (25 mm) 4.9 in (124 mm) 3.13 in (79.4 mm) x 3.19 in (55.6 mm) 3 in (76 mm) TABLE/FLOOR LAMP DIMMER Caseta Wireless plug-in lamp dimmer for LED, CFL, or Halogen lights 300W Plug-In RF Dimmer Plug-in lamp dimmer with radio frequency receiver
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Manufacturer Information Brand Manufacturers Part Number -WH sub brand Hi-lume 1% Taxonomies, Classifications, and Categories Category Description Residential dimmers, motion sensors, controls, & photo cells Type Wireless plug-in lamp dimmer, single-pole Packaging Carton 1 Weight Per each 0.3 Uses, Certifications, and Standards Application Enclosure environmental conditions Frequency Rating Mounting Operating Temperature standard LIGHTING CONTROL Plastic 0% to 90% humidity, non-condensing. Indoor use only. 50/60 HZ Plug-in 0 to 40 degrees Celsius UL, RoHS compliant, FCC part 15 compliant for commercial applications at 120 VAC to 277 VAC Type TL rated
CasétaT Wireless The CasétaR Wireless controls lamp loads, both directly and remotely when paired with PicoR remote controls, providing a system that delivers convenience and ease of installation. The CasétaR Wireless uses R patented Clear ConnectR RF Technology which enables wireless communication with PicoR remote controls and the R Smart BridgeT and Smart BridgeT Pro. Features The CasétaR Wireless provides dimming of multiple load types and, when paired with PicoR remote controls, allows remote control from anywhere in the space. When used with the R Smart BridgeT or Smart BridgeT Pro, the CasétaR Wireless may be programmed via the R app, incorporated into lighting scenes, scheduled for daily events, and controlled from anywhere in the world 1. R patented Clear ConnectR RF Technology works through walls and floors. Dual-receptacle design allows dimming of two plug-in lamps (lamps controlled together). ideal for retrofit applications. Works with dimmable LEDs and CFLs as well as incandescent and halogen light bulbs. can be converted to a switch to control non-dimmable loads. CasétaR Wireless Load Types and Capacity 2 LED up to 100 W Halogen up to 300 W 369805d 1 09.16.14 Pico Remote Control Smart BridgeTM and Smart BridgeTM Pro CFL up to 100 W Incandescent up to 300 W CFL/ LED Total Wattage 0 W + 300 W 1 W 33 W + 200 W 34 W 66 W + 100 W 67 W 100 W + 0 W Incandescent/Halogen Total Wattage Mixing bulb types (using a combination of CFL/LED and Incandescent/Halogen bulbs) reduces maximum wattage as shown in the chart above. has a minimum load requirement of 10 W or one bulb from the compatible list. 1 The app is required for setup and use with the Smart BridgeTM and Smart BridgeTM Pro. The app is compatible with ios devices version 6.0 or later and AndroidTM devices 4.0 or later. 2 See www.casetawireless.com/bulblist for the latest list of compatible bulbs. ios is a registered trademark of Cisco in the U.S. and other countries and is used under license. Android is a trademark of Google Inc.
369805d 2 09.16.14 Specifications Regulatory Approvals culus Listed NOM certified FCC Approved. Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules Industry Canada certified IFTEL certified Power Operating voltage: 120 V~ 50/60 Hz Key Design Features* Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2. Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. Dimmers always operate locally and do not require system control. Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored. Green indicator LED. System Communications and Capacity The CasétaR Wireless communicates with PicoR remote controls and R Smart BridgeT or Smart BridgeT Pro through radio frequency (RF). The CasétaR Wireless must be located within 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls, of PicoR remote controls and Smart BridgeT or Smart BridgeT Pro. Device limits PicoR remote controls only: up to 10 PicoR remote controls may be paired to each CasétaR Wireless (with no Smart BridgeT installed). Smart BridgeT or Smart BridgeT Pro system: up to 50 total wireless devices (CasétaR Wireless dimmers/ switches, PicoR remote controls) are supported per system. Smart BridgeT or Smart BridgeT Pro counts as one device. Environment Ambient operating temperature: 32 F to 104 F (0 C to 40 C), 0%-90% humidity, non-condensing. Indoor use only. * For advanced features, tips on how to use CasétaTM Wireless dimmers with CFLs and LEDs, the complete CasétaTM Wireless product line, and more, please visit www.casetawireless.com/features
Operation 369805d 3 09.16.14 Indicator LED On Brighter Darker Off Dimensions Front View Side View 3 1 8 in (79.4 mm) 2 3 16 in (55.6 mm) 1 3 16 in (30.2 mm)