505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications
The 505F Series 3//5-Way Ball Valve The 505F is a true multi-way ball valve with balanced fourseat construction. This full port valve is available in a variety of flow plans which can replace multiple two-way valves in a process system. A standard ISO 5 pattern mounting pad allows for easy assembly of pneumatic and electric actuators. ISO 5 Mounting Pad Full Port Construction Multi-Position Lever Handle Positioning Pin High-Cycle, Live-Loaded Stem Packing Multiple Configurations Standard Features and Benefits Balanced -Seat Construction Unlike two-seated diverter valves, the 505F series has four seats (five seats in bottom entry valves) for positive shut-off in the closed position. This true multiport function can reduce the number of valves required in a process system and gives engineers greater design flexibility Trunnion Mounted Ball ( / - ) Lateral forces in a 3-way valve can cause unwanted seat distortion. Stem/ball isolation prevents side-loading and wear of downstream seats, improving performance and service life ISO 5 Mounting Pad High-Cycle, Live-Loaded Stem Packing Dynamic loading on stem packing ensures a tight seal through varying pressure and temperature conditions, extending service life and reducing maintenance costs O-Ring Stem Bearing (3 and ) Maintains stem alignment Reduces packing side-loading and wear Enhances stem seal Blow-Out-Proof Stem Stem is bottom loaded to prevent removal when valve is in service Full Port Design Full port construction improves flow characteristics for greater process efficiencies Multi-Position Lever Handle The lever handle can be positioned in four different orientations for greater piping flexibility Options - or 5-way construction with multiple flow patterns Butt weld and socket weld configurations available 505F Pressure / Temperature Chart Pressure (PSI) 00 000 800 600 00 00 0-0 Operating Conditions Temperature range: -0 F ~ 0 F Maximum pressure: 000 PSI WOG (/ - ), 600 PSI WOG (3 - ) Specifications All valves shell and seat tested to ANSI/ASME B6.3 and API 598 All materials comply with applicable ASTM material specifications End connections: NPT to ANSI B.0., BW to B6.5, SW to B6. / - 3 - (RTFE Seats) 0 00 00 300 00 50 Temperature ( F)
/" ~ " T OD OG OP (B.C.) W 3 6 7 A - A View, T Port 3 7 6 8 M 0 5 9 8 5 0 F E A A L 9 3 Part numbers 0 to are for / - only. H Valve Components # Part Name Material Qty. Body A35 Gr. CF8M End Cap A35 Gr. CF8M 3 3 Blind End Cap A35 Gr. CF8M Ball 36SS 5 Stem 36SS 6 7 Seat Body Seal RTFE (5% C.F.) PTFE 8 Thrust Washer PEEK 9 Stem Packing Set PTFE 0 Packing Gland Belleville Washer Gland Nut 3 Gland Nut Lock Washer Stop Plate 30SS 5 Positioning Pin 6 Handle 7 Handle Nut 8 Handle Cover 9 Body Bolt Vinyl 6 0 Stem Set Pin Trunnion Bearing Trunnion Bolt 3 Trunnion Trunnion Seal 36SS PTFE 36SS PTFE Dimensions (Inches) Size L P M H G D T E F W /-3/8 / 3/ / / 3.39.09.33.76 5.3 5.87 7.3.97.97.97.76.76.0.0 5.7 5.7 6.50 7.68 9.8 9.8.0 3.07 3.07 3.60.0.90 5.0 6.0 0.39 0.39 0.7 0.55 0.7 0.7 0.79 0.7 0.59 0.79 0.99.5.50.00 0.6 0.6 0.3 0.38 0.38 0.38 0.7 0.7 0.7.06.0.78.79.0 0. 0. 0.5 0.60 0.73 0.73 0.85 M6 M6 M6 M8 M8 M0 M0 ISO 5 Pattern Weight (lbs) F05 F05 F05 F07 F07 F0 F0 3.3 5. 6. 8.8. 0.0 33.0
3" ~ " 3 6 S 0 5 OD W OP(B.C.) A 6A Valve Components # Part Name Material Qty. Body A35 Gr. CF8M End Cap A35 Gr. CF8M 3 A Blind End Cap A35 Gr. CF8M 3 Ball 36SS 6 3 5 7 M 0 8 Stem 36SS 5 Seat RTFE (5% C.F.) 6 Body Seal (small) PTFE 3 6A Body Seal (large) PTFE 7 Thrust Washer PEEK 9 F E H 8 Stem Packing Set PTFE 9 Packing Gland 0 Belleville Washer 30SS Gland Nut 8 Gland Nut Lock Washer 7 9 3 Stop Plate Positioning Pin 5 Handle Drive Coupling 6 Pipe Handle 7 Handle Bolt 8 Stem Bearing PEEK - Carbon Filled 5 6 3 L 9 Body Bolt 0 0 Seat Retainer 36SS Seat Retainer O-Ring Viton 90 Stem Set Pin 36SS 3 Trunnion Bearing PTFE Trunnion Seal PTFE 5 Trunnion 36SS 6 Trunnion Bolt Dimensions (Inches) Size L M H D S E F P W ISO 5 Pattern Weight (lbs) 3 9.68.00 7.50.9 0.87.3 0.9.0 M0 F0 57.0.69 3.00 8.0 3.78 0.87.5 0.90.0 M0 F0 75.0
Pattern Options 3 Way - Side, T-Port 0 90 A & B 0 90 B & C 03 90 C & D 0 90 D & A 80 A & B & C 3 80 B & C & D 3 80 C & D & A 80 D & A & B typically enters from either side of the run 3 3 Way - Side, L-Port 0 90 A & B Position D Position C typically enters from the branch 3 Way -, 80 Angle Port 0 90 A & B 0 90 B & C 80 A & B & C 3 Way -, 90 Angle Port 0 90 A & B Position C typically enters from bottom of the valve typically enters from bottom of the valve Way -, T-Port 0 90 A & B 0 90 B & C 80 A & B & C Way - Side, Double Port 0 90 A & B Position C typically enters from bottom of the valve typically enters from both sides of the run Way -, L-Port 0 90 A & B 5 Way -, Angle Port 0 90 A & B typically enters from bottom of the valve typically enters from bottom of the valve
Direct Mount Products Automation Systems 505F Ordering Information Example: Multi-Port Ball Valve with ISO 5 Pattern Mounting Pad, Lever Handle and Positioning Pin, Full Port, 36SS Body and Trim, RTFE (5% C.F.) Seats and PTFE Seals, NPT Ends, 3-Way Side, T-Port, Pattern 0 505F 0 6 C T T 3 S T 0 Valve Series Valve Size Body and Trim Material Seat Seal End Connection Port Config. Ball Config. Pattern 505F - Full Port 0 03 0 06 0 0 30 0 / 3/8 / 3/ / / 3 6 - A35 Gr. CF8M Body (36) C - RTFE (5% C.F.) T - PTFE T - NPT S - Socket A35 Gr. CF8M Trim (36) R - RTFE (5% G.F.) Weld - Butt P - PEEK (PTFE and Carbon Filled PEEK) Weld Sch. 0 G - Grooved T - PTFE M - TFM 3-3 Way - Way 5-5 Way S - Side B - B - B - T - T - Port L - L - Port D - Double L - Port BL - Single L Port, 99 - Adjust in Field 00 0 0 03 0 3 3 Due to continuous product development, information may change without notice. See Pattern Options. Distributed by: INLINE INDUSTRIES, INC. 70-A Littlejohn Street Baldwin Park, CA 9706 Tel: (66) 83-688 Fax: (66) 83-686 www.ballvalve.com info@ballvalve.com 00 Inline Industries. All rights reserved. 006.