Manifold Mounted Miniature Cartridge Valves

Similar documents
Valve Reference C5. Valve Reference C6. 4-Way. 4-way direct acting

Goldring Ventil BG 30

3-Way. Direct Acting & Pilot Operated Quick Exhaust Valves 1/4" - 3/8" NPT. General Description: Applications: Electrical Characteristics:

DE- OUT OUT DE- OUT OUT DE- SERIES MODEL E21 2-WAY NORMALLY OPEN CONDUIT HOUSG (700) 235 (0) 1 (3) (1) (700) 235 (0) 1 (3) (1) E21G7XC

Series 1, 2 & 6 Options selector. Port 4 = 1/8" NPT 5 = 1/4" NPT (Series 6* only) 7 = #10-32 UNF 8 = 1/4-28 UNF

Solenoid Valves Section. Level Controls & Flow Switches Section. 7/99 Littleton, CO USA Phone Fax

2-Way/2 Position Valves

3 Way/2 Position Valves

2/2 ^ % ) Normally Closed or Normally Open Hot Water and Steam Valves. Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT

High Pressure Solenoid Valves

% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4" NPT. Features. Construction.

Solenoid Valves & Accessories. Incorporating Solenoid Valves in. Custom Products. Solenoid Operated. Custom Products

4 qwer 2/2. Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.

Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT

Control & Power, Inc

Performance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.

How to order (see coil section for part numbering charts)

MINIATURE SOLENOID GENERAL SERVICE VALVES

3/2-way Rocker Solenoid Valve for pneumatic systems

Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide

(Accessory, see ordering info) Wetted Materials

SKINNER Intrinsically Safe Series Four-Way

4 qwer. Steam and Hot Water Valves 2/2 SERIES. Hot Water/ Steam. Features. Construction. Nominal Ambient Temperature Ranges: Electrical.

Direct-acting 2/2-way plunger valve

Control Valves & Valve Accessories

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm

3/2-way Solenoid Valve, direct-acting, NC or NO

Low Power. 1.4 W Low Power Solenoid Valves. Brass or Stainless Steel Bodies 1/4" to 1" NPT. Features

/2. Hot Water and Steam Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT ^ % )

3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base

3/2-way Miniature Rocker Solenoid Valve for pneumatic systems

Miniature Pneumatic Solenoid Valve. Power: 0.5 Watt & 1.0 Watt. Not all power options are available in all models, see ordering info.

3/2-way Miniature Rocker Solenoid Valve for pneumatic systems

4 N E X T G E N E R A T I O N

Proveedor Integral de Soluciones para la Industria. Desde1963

Refrigeration Solenoid Valves & 3-Way Heat Reclaim Valves

2/2-way Solenoid Valve for liquids and gases

The manifolds can be powered through various fieldbus systems, multipole or common terminals.

Data sheet. Solenoid valves 2/2-way direct-operated Type EV210B. February 2002 DKACV.PD.200.A B1504

Maximum Line Resistance vs. Length of Wire Max. Loop Resistance. Max. Wire Run 18AWG 7x26 Stranded (ft)

2/2-way Miniature Solenoid Valve

Solenoid Valves Solenoid Valves For All Your Applications KIP is proud to offer a complete line of solenoid valves, manifold assemblies, and custom va

2/2 or 3/2-way Miniature Rocker Solenoid Valve

Technical Data Sheet

Engineering Information. Solenoid Valves Principles of Operation. Solenoid Valves. Direct Acting Valves (Figures 1A, 1B)

Direct-acting 3/2 way plunger valve

Voltage. Common Marking. Outlet Port Size. A S1, S2, S6 2WNC 1/8"NPT IN 1/8"NPT OUT Common in, individual out

2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2

Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.

2/2 3/2 4/2 SERIES Air Operated. General Service Air Operated Valves. Brass Body 1/4" to 2" NPT. Features. Construction.

S21 Series. - 1" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight

SOLENOID VALVES pilot operated for hot water/steam applications 3/8 to 1

Valves, Fittings, and Manifolds Catalog. We make things MOVE

The extendable type 5470 EExi can be used for block modules or for entire valve blocks (tag connectors on top, coil spacing 19 mm).

Solenoid valves 3/2-way direct-operated Type EV310A

2/2-way Compact Solenoid Valve, G 1/4 - G 1/2

S21 Series. - 2" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight

ASCO Stainless Steel Spool Valves Manually Operated and Main Supply Reset Valves

Pneutronics. Miniature Proportional Valves. Catalog PND-MPV-001/US January 2007

2/2 or 3/2 way direct acting rocker solenoid valve

Solenoid Valves Catalogue

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

Miniature and Subminiature Solenoid Valves

Information 3 Form A 4 Industrial Form Type B 12 Form B 16 Form C 18 Micro Type C 22

Table of Contents. Page. See Catalog and Product Updates on our Website

Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT

Poppet Valves Series. Keeping the World Flowing

Gold Ring Two -Way, Three-Way and Four-Way Solenoid Valves. Catalog 7300A

Miniature and Subminiature Solenoid Valves

2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2

4 qwer. Air Operated Valves 2/2 3/2 4/2 SERIES. Air Operated. General Service. Brass or Stainless Steel Bodies 1/4" to 2" NPT. Features.

/ 3/ 4/ 5/ 5/3 4 Nominal Ambient Temp. Ranges Series Body Material Normal Temperature Range High Ambient Temp Version 8553 Stainless Steel -4 F to 4 F

3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics

2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid

16mm miniature rocker solenoid valve with isolating diaphragm for special applications

Technical Data... 3 How to Order... 4 Dimensions... 5 Inline Mount Valve... 6 Manifold Dimensions and Part Numbers... 6

Pressure Sensor No Series

188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c

MAKING MODERN LIVING POSSIBLE. Solenoid valves, 2/2-way assisted lift operated type EV251B Technical brochure

EVP SERIES PROPORTIONAL CONTROL VALVES

2/2-way Solenoid Valve with servo diaphragm

PF6 Stainless Steel Piston Actuated On/Off Valves

Sinclair Collins. Process Control Valves. For Steam, Hot and Cold Liquids -40 to 450 F up to 500 psi. Catalog SCV-100/USA April 2001

Proveedor Integral de Soluciones para la Industria

Miniature Pneumatic Solenoid Valve

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm

4 qwer. Main Pulse Valves Dust Collector 2/2 SERIES H OME PAGE P RINT. High Flow. Aluminum Bodies Air and Inert Gas 3/4" to 3" NPT.

2/2 ^ % ) Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.

Parker Fluid Control Angle Body Valves

Temperature Sensor Series

OPERATOR S MANUAL AND SALES AND ENGINEERING DATA

Type EV224B. Servo-operated 2/2-way solenoid valves for high pressure air. Data sheet

3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics

MAx-305 & MAx-318 Series MAx-405 Through MAx-419 Series Two-Position Actuators

Constructions Suitable for -40 C to -50 C Ambient. 2, 3 and 4 Way Constructions Available. Brass, Aluminum and Stainless Steel Bodies

2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid

Servo-operated 2/2-way solenoid valves for high pressure

Solenoid Valves & Accessories. Cylinder Control Bases. Features. Performance Data. Materials

Miniature Pneumatic Solenoid Valve

Solenoid Valve ST-IA-series

Transcription:

Manifold Mounted Miniature Cartridge Valves -Way & 3-Way Direct Acting Miniature Cartridge Valves General Description: The manifold mounted miniature Cartridge Valve is offered in twoand three-way models with a stainless steel body. It offers a space-saving approach, with no manifold orifices to machine or press in, since the orifice is integral to the cartridge valve. Ultimately, less machining means lower manifold costs. These cartridge valves come fully assembled with no loose parts the sleeve, plunger, spring and orifice are pressed together as one unit. Installation Valves can be mounted in any position. The preferred orientation is with the coil vertical and upright. Standard Materials of Construction Please refer to page D8. Compatible Fluids Lubricated Gases, Water, Oil (300 SSU) and additional fluids compatible with materials of construction. Use of non-lubricated gaseous media can affect valve life. Electrical Characteristics: Standard Voltages: AC 4/60 0/60 0/50 40/60 0/50 DC, 4 For other voltages consult factory Coil Classification: Class F standard Class H available AC & DC coils are interchangeable on the same pressure vessel. Agency Approvals: Standard valves with NEMA 4X are C-UL-US Listed or Recognized. For additional details, consult factory. Maximum Ambient Temperature 35 F (AC)/5 F (DC) In absence of moisture, applications at temps as low as -0 F are possible. Please refer to page D8 for details. Applications: Analyzers and diagnostic equipment Medical and dental equipment Beverage dispensing and vending machines Humidification and misting equipment Pneumatic positioning Automatic dispensing equipment Irrigation equipment Instrumentation panels Lubrication equipment Refrigerant reclaim Automotive diagnostics/service 800 85 8305 ( 800 Valve05) D3

-Way Small Direct Acting - Normally Closed - Stainless Steel NPT Orifice in. Flow Factor Operating Differential Min. Gas Water Oil Watt Vessel Number Coil Valve AC TECHNICAL SPECIFICATIONS CONTINUED /8 3/64 0.06 0 950 950 950 8.5 40 FKM 09CL5EV4 9 D /8 /6 0.0 0 65 65 65 8.5 40 FKM 09CL5GV4 9 D /8 5/64 0.5 0 450 450 450 8.5 40 FKM 09CL5JV4 9 D /8 3/3 0. 0 30 30 30 8.5 40 FKM 09CL5LV4 9 D /8 7/64 0.8 0 45 45 45 8.5 40 FKM 09CL5MV4 9 D /8 /8 0.3 0 75 75 75 8.5 40 FKM 09CL5PV4 9 D /8 5/3 0.38 0 00 00 00 8.5 40 FKM 09CL5QV4 9 D DC TECHNICAL SPECIFICATIONS CONTINUED /8 3/64 0.06 0 390 390 390 8 40 FKM 09CL5EV4 9 D /8 /6 0.0 0 55 55 55 8 40 FKM 09CL5GV4 9 D /8 5/64 0.5 0 80 80 80 8 40 FKM 09CL5JV4 9 D /8 3/3 0. 0 30 30 30 8 40 FKM 09CL5LV4 9 D /8 7/64 0.8 0 00 00 00 8 40 FKM 09CL5MV4 9 D /8 /8 0.3 0 60 60 60 8 40 FKM 09CL5PV4 9 D /8 5/3 0.38 0 30 30 30 8 40 FKM 09CL5QV4 9 D -Way Small Direct Acting - Normally Open - Stainless Steel NPT Orifice in. Flow Factor Operating Differential Min. Gas Water Oil Watt Vessel Number Coil Valve AC TECHNICAL SPECIFICATIONS CONTINUED /8 /3 0.0 0 375 375 375 0 40 FKM 09FL5AV4 9 D /8 3/64 0.06 0 30 30 30 0 40 FKM 09FL5EV4 9 D /8 /6 0.0 0 50 50 50 0 40 FKM 09FL5GV4 9 D /8 5/64 0.4 0 05 05 05 0 40 FKM 09FL5JV4 9 D /8 3/3 0.0 0 80 80 80 0 40 FKM 09FL5LV4 9 D DC TECHNICAL SPECIFICATIONS CONTINUED /8 /3 0.0 0 375 375 375 8 40 FKM 09FL5AV4 9 D /8 3/64 0.06 0 30 30 30 8 40 FKM 09FL5EV4 9 D /8 /6 0.0 0 50 50 50 8 40 FKM 09FL5GV4 9 D /8 5/64 0.4 0 05 05 05 8 40 FKM 09FL5JV4 9 D /8 3/3 0.0 0 80 80 80 8 40 FKM 09FL5LV4 9 D D4 800 85 8305 ( 800 Valve05)

3-Way Small Direct Acting - Normally Closed - Stainless Steel Orifice In. Flow Factor NPT In Exh. In Exh. Min. AC TECHNICAL SPECIFICATIONS Operating Differential Gas Water Oil Watt Vessel Number Coil Valve /8 /3 /3 0.0 0.0 0 50 50 50 0 40 FKM 309CL5AV4 9 D /8 3/64 3/64 0.05 0.05 0 00 00 00 0 40 FKM 309CL5EV4 9 D /8 /6 /6 0.09 0.0 0 30 30 30 0 40 FKM 309CL5GV4 9 D /8 5/64 5/64 0.5 0.4 0 90 90 90 0 40 FKM 309CL5JV4 9 D /8 3/3 3/3 0.9 0.0 0 75 75 75 0 40 FKM 309CL5LV4 9 D /8 7/64 3/3 0.5 0.0 0 50 50 50 0 40 FKM 309CL5MV4 9 D /8 /8 3/3 0.3 0.0 0 40 40 40 0 40 FKM 309CL5PV4 9 D /8 5/3 3/3 0.38 0.0 0 5 5 5 0 40 FKM 309CL5QV4 9 D DC TECHNICAL SPECIFICATIONS /8 /3 /3 0.0 0.0 0 50 50 50 8 40 FKM 309CL5AV4 9 D /8 3/64 3/64 0.05 0.05 0 00 00 00 8 40 FKM 309CL5EV4 9 D /8 /6 /6 0.09 0.0 0 30 30 30 8 40 FKM 309CL5GV4 9 D /8 5/64 5/64 0.5 0.4 0 90 90 90 8 40 FKM 309CL5JV4 9 D /8 3/3 3/3 0.9 0.0 0 75 75 75 8 40 FKM 309CL5LV4 9 D /8 7/64 3/3 0.5 0.0 0 50 50 50 8 40 FKM 309CL5MV4 9 D /8 /8 3/3 0.3 0.0 0 40 40 40 8 40 FKM 309CL5PV4 9 D /8 5/3 3/3 0.38 0.0 0 5 5 5 8 40 FKM 309CL5QV4 9 D 3-Way Small Direct Acting - Normally Open - Stainless Steel Orifice In. Flow Factor NPT In Exh. In Exh. Min. AC TECHNICAL SPECIFICATIONS Operating Differential Gas Water Oil Watt Vessel Number Coil Valve /8 /3 /3 0.0 0.0 0 375 375 375 0 40 FKM 309FL5AV4 9 D /8 3/64 3/64 0.05 0.05 0 30 30 30 0 40 FKM 309FL5EV4 9 D /8 /6 /6 0.0 0.09 0 50 50 50 0 40 FKM 309FL5GV4 9 D /8 5/64 5/64 0.4 0.5 0 05 05 05 0 40 FKM 309FL5JV4 9 D /8 3/3 3/3 0.0 0.9 0 80 80 80 0 40 FKM 309FL5LV4 9 D DC TECHNICAL SPECIFICATIONS /8 /3 /3 0.0 0.0 0 375 375 375 8 40 FKM 309FL5AV4 9 D /8 3/64 3/64 0.05 0.05 0 30 30 30 8 40 FKM 309FL5EV4 9 D /8 /6 /6 0.0 0.09 0 50 50 50 8 40 FKM 309FL5GV4 9 D /8 5/64 5/64 0.4 0.5 0 05 05 05 8 40 FKM 309FL5JV4 9 D /8 3/3 3/3 0.0 0.9 0 80 80 80 8 40 FKM 309FL5LV4 9 D 800 85 8305 ( 800 Valve05) D5

3-Way Small Direct Acting - Universal - Stainless Steel Orifice In. Flow Factor NPT In Exh. In Exh. Min. AC TECHNICAL SPECIFICATIONS Operating Differential Gas Water Oil Watt Vessel Number Coil Valve /8 /3 /3 0.00 0.00 0 00 00 00 0 40 FKM 309UL5AV4 9 30 /8 3/64 3/64 0.050 0.050 0 50 50 50 0 40 FKM 309UL5EV4 9 30 /8 /6 /6 0.090 0.00 0 00 00 00 0 40 FKM 309UL5GV4 9 30 /8 5/64 5/64 0.50 0.40 0 70 70 70 0 40 FKM 309UL5JV4 9 30 /8 3/3 3/3 0.90 0.00 0 50 50 50 0 40 FKM 309UL5LV4 9 30 /8 7/64 3/3 0.50 0.00 0 40 40 40 0 40 FKM 309UL5MV4 9 30 /8 /8 3/3 0.30 0.00 0 30 30 30 0 40 FKM 309UL5PV4 9 30 /8 5/3 3/3 0.380 0.00 0 0 0 0 0 40 FKM 309UL5QV4 9 30 DC TECHNICAL SPECIFICATIONS /8 /3 /3 0.00 0.00 0 00 00 00 8 40 FKM 309UL5AV4 9 30 /8 3/64 3/64 0.050 0.050 0 50 50 50 8 40 FKM 309UL5EV4 9 30 /8 /6 /6 0.090 0.00 0 00 00 00 8 40 FKM 309UL5GV4 9 30 /8 5/64 5/64 0.50 0.40 0 70 70 70 8 40 FKM 309UL5JV4 9 30 /8 3/3 3/3 0.90 0.00 0 50 50 50 8 40 FKM 309UL5LV4 9 30 /8 7/64 3/3 0.50 0.00 0 40 40 40 8 40 FKM 309UL5MV4 9 30 /8 /8 3/3 0.30 0.00 0 30 30 30 8 40 FKM 309UL5PV4 9 30 /8 5/3 3/3 0.380 0.00 0 0 0 0 8 40 FKM 309UL5QV4 9 30 Arrangement -Way normally closed -Way normally open Arrangement 3-Way normally closed 3-Way normally open 3-Way universal over seat body flow over seat body flow common under seat body flow sleeve - - 3 under seat body flow exhaust NC sleeve 3 exhaust 3 3 NO Product Features: Space saving approach Less manifold machining means lower manifold cost No manifold orifices to machine or press in Cartridge valves are 00% tested Easy to assemble and disassemble with a 5/3" hex wrench to a torque of 5-35 in-lbs. Available with all coil options from Chart 9 in coil section. D6 800 85 8305 ( 800 Valve05)

Valve D 5/3 HEX -Way Normally Closed (09CLxx).94 3/4-4 UNS-A TH'D.54 WAY NORMALLY CLOSED Manifold cavity for 3/4-4 UNS-B thread per VMR-046 (See page D8) Valve D B.65 PORT 3 3/4" HEX.30.3 -Way Normally Open (09FLxx) 3-Way Normally Closed (309CLxx) 3-Way Normally Open (309FLxx) 3-Way Universal (309ULxx).54 PORT 4 PLC'S.74 PORT Manifold cavity for 3/4-4 UNS-B thread per VMR-046 (See page D8) 3/4-4 UNS-A TH'D. ALL DIMENSIONS REFERENCE ONLY. MANIFOLD CAVITY FOR 3/4-4 UNS-B THREAD PER VMR-046 3. REF VALVE NUMBERS 09XL5XX4B4X & 309XL5XX4B4X. 800 85 8305 ( 800 Valve05) D7

-Way Miniature Direct Acting Cartridge Mounted Valve Materials of Construction** Product* Wattage Type Body Tube Stop Flange "Plunger Blank" Plunger Spring Shading Ring Ambient 09CL5 8.5 (AC) WNC - 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 35 F 09CL5 8 (DC) WNC - 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 5 F 09FL5 0 (AC) WNC /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 35 F 09FL5 8 (DC) WNC /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 5 F * Shows the first 6 digits of the pressure vessel part number. ** Maximum ambient temperature shown is the rating when valve is operating at the maximum fluid temperature as shown in the product sections for each of the valves in this catalog. 3-Way Miniature Direct Acting Cartridge Mounted Valve Materials of Construction** Product* Watt Type Body Tube Stop Flange "Plunger Blank" Plunger Spring Shading Ring Ambient 309CL5 0 (AC) 3WNC /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 35 F 309CL5 8 (DC) 3WNC /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 5 F 309FL5 0 (AC) 3WNO /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 35 F 309FL5 8 (DC) 3WNO /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 5 F 309UL5 0 (AC) 3WU /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 35 F 309UL5 8 (DC) 3WU /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 5 F * Shows the first 6 digits of the pressure vessel part number. ** Maximum ambient temperature shown is the rating when valve is operating at the maximum fluid temperature as shown in the product sections for each of the valves in this catalog. VMR-046 A Cavity Dimensional Drawing.550 MIN R.00 MAX.75 MIN TH'D DEPTH.359 R.030 45 DETAIL B SCALE 4 : 3/4-4 UNS-B TH'D TO DEPTH SHOWN A.38 +.00 -.000 E n.70 MINOR DIA REF n.768 `.00 C.085 TO INT D C.00.00 D 5 Ø.56 DR MAX n.5 DR PLC'S 5 DEPTH OF.56 DR DEPENDS ON MANIFOLD DESIGN FOR PORT #. (UNDER SEAT) 63 A MACHINED SURFACE OF IS ACCEPTABLE IF THE MACHINED 4 SURFACE HAS A CIRCULAR LAY. B 3. MANIFOLD MOUNT VALVE MUST BE IDENTIFIED WITH A LABEL WITH VMR-046 REV X. 4 3 B SECTION A-A SCALE : 60 n.354 n.33`.00 4 3 DETAIL C SCALE 4 : D DEPTH OF.5 DR DEPENDS ON MANIFOLD DESIGN FOR PORT. (OVER SEAT) DIAMETER AND SURFACE FINISH MUST BE MAINTAINED TO DEPTH SHOWN. Warning: Please contact factory for the latest version of this cavity drawing before proceeding with any manifold machining. D8 800 85 8305 ( 800 Valve05)

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback