S SERVICE PARTS www.acehydraulic.com ACE HYDRAULIC & PNEUMATICS/ACADEMY TOOL & SUPPLY Due to Promotions SOME SUPPLIES MAY BE LIMITED 6720 VIP Parkway Syracuse, New York 13211 Phone 315-454-8989 24 Hour Fax 315-455-9522 Good Through July 2016 AUTOMOTIVE CONSTRUCTION INDUSTRIAL TOOLS PRICES SUBJECT TO CHANGE by Some Manufacturers MODEL 10003 3-Stone Sharpening System 8040 Great Performance Higher Durability Lightweight 3-Stone sharpening system consisting of fine medium and coarse stones.comes with angle clamp. Includes honing oil, custom caring case with instruction Cape Cod Ceramic Paring Knife 32 The Cape Cod Collection TM Paring Knife has a 3.1 white ceramic blade, with blade protector. Ceramic Features: Stay sharper longer; harder than steel and will hold edge longer than a steel blade. Will not rust and is easy to clean; resistant to acids, germs and oils. Lightweight; easy and comfortable to use for precision slicing. 15 Impact Wrenches available in short or 6 extended anvils CP7763D 3/4 Impact Wrench CP7763D-6 3/4 Impact Wrench 250-1070 ft. lbs. 465 250-1070 ft. lbs. 485 FREE CPT 7736 1/2 Impact Wrench with Purchase of CP7763 450 LIMITED PROMO Long Reach Chainsaws Cuts hard-to-reach branches from aerial basket or from the ground. Super spool selector control for use on open and closed-center hydraulic systems. Available in three lengths. Insulated fiberglass extension tubes, tested to meet OSHA regulation 1910.269. Safety features include: two-step trigger, trigger guard, and fully covered sprocket guard. Antikickback chain and automatic chain oiler. Rugged high torque gear motor. Unfilled and foam-filled extension tube versions offered. 43178 Utility Chainsaw Long Reach List 1903.00 1695 Width: 4 (102 mm) Length: 62.5 from end to end including bar and chain Weight: 8.5 lb (3.9 kg) Flow Range: 5-8 gpm (19-30 lpm) Operating Pressure: 1,000-2,000 psi (69-140 bar) Pressure Port Thread: 9/16-18 SAE O-Ring Return Port Thread: 3/4-16 SAE O-Ring Chain Size:.325 (8.3 mm) pitch Bar Gauge:.058 (1.47 mm) Cutting Capacity: 13 (330 mm) System: Super SpoolTM selector control for use on Open and Closed Center hydraulic systems Extension Type: Fiberglass tested to 100 KvA for 5 minutes 38568 Hydraulic Chainsaw Long Reach List 1937.00 1710 Width: 4 (102 mm) Flow Range: 5-8 gpm (19-30 lpm) Operating Pressure: 1,000-2,000 psi (69-140 bar) Pressure Port Thread: 9/16-18 SAE O-Ring Return Port Thread: 3/4-16 SAE O-Ring Chain Size:.325 (8.3 mm) pitch (F030030) Bar Gauge:.058 (1.47 mm) 43178 Hydraulic Chainsaw Long Reach List 1969.00 1720 Width: 4 (102 mm) Length: 88.5 from end to end including bar and chain Weight: 9.75 lb (4.4 kg) Flow Range: 5-8 gpm (19-30 lpm) Operating Pressure: 1,000-2,000 psi (69-140 bar) Pressure Port Thread: 9/16-18 SAE O-Ring Return Port Thread: 3/4-16 SAE O-Ring Chain Size:.325 (8.3 mm) pitch Bar Gauge:.058 (1.47 mm) 384829 1:1 Pressure Transfer Pump 543 Stub pump design. Adaptable for 16 or 55 gallon containers as wells as bulk tank or standpipe installations. Delivers 12.5 cubic inches per cycle. Includes suction tube, bung bushing, air couple and air nipple. Pump Description: stub Pump Body: Alum/Steel/Plastic Wetted or Soft Parts: Buna-N Pump Inlet/Outlet NPT: 1 inch - 3/4 inch Maximum Free Delivery: 14 gpm Air Inlet: 1/4 inch Maximum Rec. Inlet Air Pressure: 150 PSI Typical Automotive Use: Universal/new oil transfer Dual Temperature Heat Gun Kit with 4 Tips 850/1120 degrees fahrenheit 3H201AK 39 CP1210 35 Lb. Breaker 829 1 x 4-1/4 Standard hex chuck size 35 lb. class demolition tool. Designed for light-to-medium construction and plant maintenance work. Four-bolt backhead design Heavy-duty fronthead springs. Air Consumption (90 psi): 48 cfm Air Inlet: 3/8 NPTF Tool Only Weight: 44lbs Length: 21.25 Retainer Type: Kick Latch CP1260 60 Lb. Breaker 1-1/8 Alloy Steel Forgings - excellent durability Integral oiler - continuous lubrication Heavy-duty front head springs - reduce reaction back to operator Air inlet swivel for easy handling. Improved modern design for excellent durability. CP1260 replaces CP1230 Air Inlet: 3/4 NPT 1-1/8 x 6 chuck 885 Torque Wrenches 97352 Torque Wrench 3/8 Inch Drive 10-100 ft lbs Ratchets in only one direction to eliminate wear. Rubberized head for greater production. Selected reading is automatically locked in. Indicates desired torque by feel and sound. Accuracy +-4 percent right hand and +-6 percent left hand direction from 20-100 percent of capacity. Rugged non-slip metal handles. 97353 Torque Wrench 1/2 Inch Drive 25-250 ft lbs Set desired torque on micrometer-type scale by rotating hand grip. Wrench automatically indicates desired torque by feel and sound. Feel and hear a signal when the correct torque is reached. Ideal for jobs where it is difficult to read a dial. Torques left or right and resets in seconds. Accurate throughout entire torque range. 97355 Torque Wrench 3/4 Inch Drive 100-600 ft lbs Ratchets in only one direction to eliminate wear. Rubberized head for greater production. Selected reading is automatically locked in. Indicates desired torque by feel and sound. Accuracy +-4 percent right hand and +-6 percent left hand direction from 20-100 percent of capacity. Rugged non-slip metal handles. 99 149 450 6387 2000 ft./lbs. Torque MultiPliers Input 3/4 Output 1 Increases the range of your torque wrench Designed with 4 pinion gears 495 CP9A Rock Drill Round Shank Chuck 3/4 x 3 3/4 Blows per min.: 3420 bpm Rotation Speed: 189 rpm Air Consumption (90 psi): 20 cfm. Air Inlet 3/8 NPTF Drill rate: 4 in./min. Max Drilling Diameter: 1 Max Drilling Depth: 17.7 Length: 14.75 Tool Only Weight: 8 lbs Retainer Type: Quick Change 725 4611P Rivet Buster 1100 List 1823.00 11 Open Handle Blows/Minute: 720 Length 26 Auto Stop System Solid Pin on Valve 1/2 Pipe Thread inlet bushing Longer Piston Retainer spring New Rubber Bumpers Teasing Throttle 1/2 air inlet Air consumption: 45 cfm. 5001A 6 in. Bench Grinder with Light No load speed: 3450 RPM Comes with two griding wheels - coarse 36 grit and medium 60 grit 1/2 Arbor 139 Lock Technology LT-4700 3/8 Drive DEEP WELL 13 Piece Twist Socket Damaged Fastener Removal System This kit easily removes damaged nuts, studs, pipe nipples and bolts. Comes mounted on a 3/8 rail, individually packaged. LT-4510-D 10mm LT-4511-D 11mm, 7/16 LT-4512-D 12mm LT-4513-D 13mm LT-4514-D 14mm LT-4515-D 15mm LT-4516-D 16mm, 5/8 LT-4517-D 17mm LT-4519-D 19mm, 3/4 LT-4620-D 3/8 LT-4621-D 1 2 LT-4622-D 9/16 LT-4623-D 11/16 List 198.85 149 We Carry a LARGE SELECTION of JACK HAMMER & CHISEL BITS 9026 Cleco Style Shank Chisel Set Set includes 391, 392, 393, 394 24
2 Air Hammers Industrial 0.401 Shank Air Hammer Blows Per Min. List Sale CPT 716 3,500 125. Heavy Duty Low Vibration Air Hammer Kit CPT 7110K BPM 3,200 List 185.40 Sale 108. Air Hammer CPT 7111 Shank Size.401 List 96.82 Sale 57. Impact Wrenches 1/4 Heavy Duty Air Impact Wrench CPT 719 30 ft. lbs. 351.23 205. 1/2 Heavy Duty Air Impact Wrench CPT 749 625 ft. lbs. 371.83 218. 3/8 Drive Heavy Duty Impact Wrench CPT 724H 200 ft. lbs. 314.00 184. 3/4 Super Duty Air Impact Wrench CPT 772H 1000 ft. lbs. 726.00 425. 1 Straight Impact Wrenches CPT 7782 5160 1030.00 603. 1-Inch Super Duty Air Impact Wrench CPT 7774 5500 750. 1/2-Inch High Torque Impact Wrench, Heavy Duty, Composite Housing CPT 7748 8200 322.00 188. 3/4-Inch Super Duty Air Impact Wrench CPT 7763 6300 768.00 450. Air Impact Wrench with 6in. Anvil - 3/4in. CPT 7763-6 6300 827.00 484. 1 Inch Drive Heavy Duty Impact Wrench w Extended Anvil CPT 7782-6 5200 1030.00 603. Reciprocating Air Saws Super Duty Reciprocating Air Saw Kit Strokes Per Min List Sale CPT 7901K 10,000 360.00 211. Heavy Duty Reciprocating Air Saw Strokes Per Min List Sale CPT 7900 10,000 198.00 116. Ingersoll Rand 1200K NitroCat 1/2 in. Kevlar Composite Air Impact Wrench Min. Hose Size: 3/8 in. (PSI): 90-120 (BPM): 950 (RPM): 8,000 Torque: 200-900 ft-lbs. (Working), 1,295 ft-lbs. (Max) 249 Air Impact Tools 2135TIMAX Ultra Duty 1/2 Impact Wrench 780 ft. lbs Drive Size: 1/2 Weight(lbs.): 3.95 Free Speed (RPM): 9,800 BPM: 1,250 CFM @ Load: 24 Maximum Torque, rev(ft-lbs): 780 Nut Busting Torque (NBT): 1,100 ft-lb Sound dba@ load (Press./Power): 99.8/110 2145QIMAX 3/4 Drive Impact Wrench 1350 ft-lb maximum reverse torque from a tool that weighs just 7.4 lbs and is compact enough to access tight spaces List 505.00 325 List 899.99 539 1880-PA Aluminum Heavy Duty 1 Pistol Grip Impact Wrench List 995.00 595 Anvil Size: 1 Loosening Torque: 1,850 ft-lbs Working Torque: 200-1580 ft-lbs Blows Per Minute: 900 Warranty: 1 Year Air Screwdrivers CPT 780 Pistol Grip 1800 RPM 572.00 335. CPT 782 Straight 1800 RPM 558.00 326. CPT 783 Straight 2,000 553.00 324. Heavy Duty Air Shear Strokes Per Min. List Sale CPT 785S 2400 392.00 229. Air Drills 1/4-Inch Reversible Mini Air Drill with Keyless Chuck CPT 7300RQC 2800 250.48 147. 3/8 Air Drill CPT 887 Straight 2,700 186.00 109. 3/8-Inch Super Duty Reversible Air Drill CP789R-26 2600 rpm 345.00 202. 3/8-Inch Chuck Air Reversible Angle Drill CPT 879 1800 194.67 114. 1/2 Air Drill CPT 785H 500 RPM 367.00 215. 1/2-Inch Super Duty Reversible Air Drill CPT 789HR 500 RPM 473.00 277. Air Ratchets 1/4 Air Ratchet CPT 824 12.5 ft. lbs. 145.23 85. 3/8 Air Ratchet CPT 886 50 ft. lbs. 132.87 78. 1/2 Air Ratchet CPT 886H 50 ft. lbs. 141.11 83. Needle Scalers Needle Scaler BPM List Sale CPT 7120 4600 318.00 215. Pistol Needle Scaler BPM List Sale CPT 7125 4000 284.55 225. Compact Needle Scaler BPM List Sale CPT 7115 4000 265.00 155. Ingersoll Rand 231C 1/2-Inch Super-Duty Air Impact Wrench Exclusive impact mechanism Pressure-feed lubrication Adjustable power regulator Easy to service 2-pc. construction Contoured handle for comfort and control 261 3/4 Super Duty, Air Impact Wrench Jumbo hammer mechanism. Up to 1,000ft.-lbs. of torque. Trouble-free, longer performance aided by Pressure-Feed Lube System. Compact and only 7 5/8 long. Handle exhaust. 1893-1 1 Impact Wrench Low wear pin-less hammer 1800 (ft-lb) Maximum torque Combined reverse and power management switch List 830.00 550 159 495 239 List 385.00 1,295 (ft-lbs) Working Torque: 200-950 ft-lb Blows per Minute: 1,400 BPM 2 Year Manufacturer Warranty Parts and Labor Sanders CPT 870 Dual Action 10000 111.24 69. CPT 872 Straight 22,000 111.18 69. CPT 874 Cut Off Tool 2800 113.00 69. Mini Random Orbital Sander Kit CPT 7200S 15,000 212.18 124. Random Orbital Finishing Sander- 3/32 Orbit- 6-Inch Pad CPT 7225 12,000 284.00 166. Random Orbital Sander-3/16 Orbit 6-Inch Pad CPT 7255 12,000 285.00 167. Heavy Duty Twin Piston Straight Line Sander CFM List Sale CPT 7268 8.5 222.48 130. 7-Inch Angle Sander CPT 7269S 5000 445.99 261. Pistol Sander High Speed CPT 9778 18500 160.00 94. Heavy-Duty Angle Air Polisher - 7-Inch CPT 869P 2500 rpm 239. Grinders CPT 875 Mini 90 0 Angle 22,500 108.15 63. CPT 876 Mini Straight 30,000 113.00 66. Mini Angle Head Air Die Grinder CPT 9106QB 22,000 168.00 98. Heavy Duty 5-Inch Angle Grinder with 5/8-Inch, 11 Spindle CPT 9121BR 12000 378.42 221. 7 Angle Air Grinder CPT 9123 7500 660.00 386. 2-Inch Angle Grinder / Cut Off Tool CPT 7500D 22,000 275.01 161. Air Scribe BPM List Sale CPT 9361 13,500 285. Heavy Duty Air Nibbler Strokes Per Min List Sale CPT 835 2750 434.00 254. 285B-6 1 Drive Heavy Duty Impact Wrench with 6 Anvil Adjustable 3 position power regulator provides ultimate power control. Robust 6 vane air motor delivers 1,450 ft./lbs. maximum torque. Ingersoll Free speed: 5,000 RPM 295 Rand 1 Heavy Duty, Air Impact Wrench Handle exhaust directs air away from the work. Top-mounted dead handle. 3-position power regulator 1150 1/2 Killer Torque Composite Impact Wrench 595 295A 1 Drive 1770, Max Torque Air Impact Wrench Torque range (ft - lb (nm)) 100-1000 (136-1356) Max torque (ft - lb (nm)) 1450 (1966) Blows per min 700 6310 6 Dual Action Sander 595 595 Specifications: Free Speed: 10,000 rpm Noise Level: 82 dba Orbit: 3/16 Average Air Consumption: 2.5 CFM Weight: 2.3 lbs. Profile: 3-3/4 high List 170.00 119
Mini Needle Scaler 5263 Air inlet size: 1/4 NPT Recommended hose size: 3/8 (10 mm) 19-0.12 (3 mm) Dia. x 5 (125 mm) long needles inc. Steel housing Hardened steel barrel and piston Stroke length: 2.0 (51 mm) Bore diameter:.7 (18 mm) Blows per minute: 4000 Weight 2.6 lb (1.2 kg) Length: 11.4 (290 mm) 165 1300 1150 Lubricators Accessories 219 Sets 1/8-3/16 diameter rivets in all materials. Pulling force: 1,983 lbs.; Stroke:.551 Recommended airline pressure: 85-95 psi Weight: 3.3 lbs Hydraulic Knock-Out Kit Die Grinder Collet Size: 1/4 in Power Cap.: 1/2 hp Free Speed: 16000 rpm Air Consumption: 18 CFM [Max] Pressure: 90.00 PSIG Inlet Size: 1/4 in (NPT) Hose Size: 3/8 in Length: 7 1/2 in Control Type: Lock-Off Lever Throttle Wt.: 2 lb List 274 Air/Hydraulic Riveter MODEL 15906 (7646) Light Duty Right Angle Driver with Hand Pump, Draw Studs, Spacer and Plastic Case Air Reciprocating Saw Power : 1.0 hp (0.75 kw) Strokes per Minute : 1800 Stroke Length : 0.6 (15 mm) Lockoff Trigger Start Variable Speed Swivel Air Inlet 79050 V-3 5056 79060 V-4 895 Air/Hydraulic Riveter Sets 3/32 to 1/4 diameter rivets in all materials Sets T-Rivets/Klik Split, Klik Lock and all other structural blind rivets. 3,055 pound pulling force..562 inch stroke Recommended airline pressure is 85-95 ps Includes : 746 UPC 17091 Ram (includes following item), 2113B UPC 10109 Draw Stud-3/4 IN x 8 IN, 1557AA UPC 03170 Punch Sleeve, 20963 UPC 20963 Draw Stud-3/8 INx 7.9 IN, 1924AA UPC 03248 Spacer-Short, 1925AA UPC 03249 Spacer-Medium, 1926AA UPC 06904Spacer-Long, 34. Type : Hydraulic Weight : 20.000 LB (9.100 KG Chisels Steel Hand Pump 10,000 PSI Pump Oil Capacity 40 (in3) List 380.00 In-line lubricators and filterlubricators from 1.05 fluid ounce capacity Pressure fed and constant feed types available Adjustable metering valve Grinding aids Safety lock cables, check valves Hose swivels Screened inlet bushings Airtool oil, air tool flush Others Retainers Sleeves Springs Bumpers Chisels and Points for Scalers, Chipping Hammers, Rivet Busters, Paving Breakers and Rock Drills Spread Cylinder 19 MODEL 917 Analog Oil Meter Portable Chassis Lubrigun Metering Control Valve For oils, automatic transmission fluids, and antifreeze. 1000 psi max. operating pressure. 3-1/2 dia. 1/2 FNPT male inlet/outlet. 1/2 male x 1/2 female swivel included. Dial/Digit Totals 60 Quarts, Dial Graduation 1 Quarts, Extension Type Rigid, Antifreeze, Preset Function 685 MODEL 282398 3:1 Pressure Ratio Stub Pump Assembly Comes complete with 282396 bare stub pump, 84935 pump cover kit, 73024 oil connecting hose, 72024 air connecting hose, 241584 90 volume union elbow, 815 air coupler, 11659 air nipple and 84538 bung bushing. Delivers six gallons of product per min. Ideal for dispensing fluids from drums, tanks or remote standpipe mount. Air Inlet: 1/4 NPT Material Outlet: 1/2 NPT List 1122.00 895 MODEL 1244 12v Cordless Powerluber Grease Gun Complete with case, (2) 12v batteries and charger. Single Speed High Pressure (2.9 oz/min). 3-5 cartridges per charge. 6000 psi List 272.00 239 Replacement Battery #1201 Heavy Duty Lever Gun List 49.95 MODEL 3867 79 295 MODEL 877 Metered Control Handle 39 35 MODEL 6917 895 High volume and pressure Smooth, quiet,easy to use Standard follower wipes 120 lb. drum sides clean and keeps the drum primed.package includes: high pressure 50:1 pneumatic pump, high pressure Grease Control Valve, universal swivel and Coupler and 7 hose; drum cover, flexible follower plate and band dolly with wheels. List 1167.00 695 Fits 30-55 gal. drums Pump delivers 10 oz. per stroke Comes with standard bung bushing Curved metal spout Corrosive-resistant finish prevents rusting based, non-corrosive fluids. Comes with standard bung bushing. Delivers approximately 1 gallon per 18 revolutions of handle. Great for commercial, automotive, farm and industrial applications. For use with 120 lbs. container Non-totalizing meter 1/4 PT. Grad. Equipped w/drum cover & 4 caster base MODEL 1444 Professional 14.4-Volt PowerLuberTM 69 w/2 Batteries and Carrying Case Two-speed switch for high-pressure or high volume delivery. Cycle indicator pin to monitor grease output. Smart charging system delivers reliable power. Includes grease gun, charger, two batteries and carrying case 299 Replacement Battery #1401 List 1392.00 79 MODEL 1162 Air Operated Grease Gun 40:1 at 150 PSI pump ratio 6,000 PSI max grease pressure 40-150 PSI pressure range 5.3 lbs Consistent self priming Variable speed trigger 650 89 50 x 3/8 Air Reel PowerLuber All Steel construction with 3/8 x 50 rubber hose w/2 Batteries Heavy-duty high-torque motor. 18-volt battery delivers up to 10 grease cartridges. High-strength composite body and casting. Next generation Smart Charger for faster charge time. 2-speed transmission. Dual overload protection List 495.00 950 MODEL 83753 MODEL 1844 Professional 18-Volt Cordless Grease Gun 339 129 Rotary Barrel Pump Gear Lube and Cast iron pump for Atf Dispenser transferring petroleum- 35 Equipped with 82054 bare pump assembly, 815 air coupler, 11659 air nipple, 72036 3 ft. air connecting hose, 75060 5 ft. highpressure grease connecting hose and 80202 volume elbow union. Height with drum is 46 in.. Drum and drum cover not included on material and workmanship MODEL 535 List 453.00 Grease Pump,50 To 1 MODEL G402 Lever-Action Barrel Pump Medium Pressure Mechanical Dial Metering Control Valve MODEL 926 Air-Operated Portable Grease Pump Package for Oil and ATF All-steel handle for durability and longevity. Precision control inlet check valve provides ease of handle operation. Trigger guard prevents pinching. Balanced design reduces user fatigue MODEL G401 List 352.00 99 7500 psi maximum operating pressure 18 Flexible hose with coupler Handy 3-way loading Exclusive Flip over Follower Rugged cast iron head 20 cu. in. air motor requires no oiling during normal operation Holds 120 lb. original refinery container Includes roll-a-round four caster base Supplied with 7 ft. high pressure hose List 37.60 List 171.00 Control Valve MODEL 1147 with 18 Whip Provides fast, clean method for removing and adding transmission and gear oil Has large 20 oz. lubricant capacity and flexible nozzle Comes with 16.5 funnel Extends from 34 to 65 Metal trolley comes with 4 casters and pull handle for safe and easier movement around the shop. Heavy Duty High Pressure Grease Gun Rugged cast pump head. Jam-proof toggle mechanism. Extra-heavy follower spring. Accessible check valve. Precision fit and hardened plunger. 8 Gallon Polyethylene Waste Oil Drain MODEL 740 2-Way Loading Lever-Action Suction Gun 8870 1-Ton Capacity Jaw width span up to 3.70 List 328.00 MODEL 1133 MODEL 615 345 WR-5 Single-Acting Hydraulic 275 P-39 150 339 Replacement Battery #1801 89 List 214.00 159 MODEL 83754 50 x 1/2 Air Reel Steel with 50 x 1/2 rubber hose and ball stop List 240.00 189 Slotted mounting base, easy installation Spring powered automatic recoil 8 position ratchet system, easy positioning of hose 5 position adjustable outlet arm 3
6001A 6002B 6006 6009 UL Continuous Rating 100/75A 100/80/50/40A 70/65/30A 70/60A Battery Volts 6/12 6/12/18/24 6/12/24 6/12 Manufacturer Boost Rating 625A 725A 600A 540A UL Cranking Assit Rating 375A 400A 280A 265A AC Cord 10 14-3 10 14-3 6.5 16-3 6.5 16-3 DC Leads 8 4AWG 8 4 AWG 7 4 AWG 7 4 AWG Clamp Rating 500A 500A 500A 500A Transformer/Rectifier Limited Warranty 5 Years 5 Years 5 Years 5 Years Shipping Dimensions (HxWxD) 26 x 16 x 14 26 x 16 x 14 23 x 19 x 16 23 x 19 x 16 Weight 58 lbs 70 lbs 53 lbs 48 lbs 1100 lb. capacity Foot pedal-operated table smoothly lifts and lowers engines, transmissions, heavy packages and cargo Lifts 32 x 191 2 table from 11 to 36 Heavy-duty, all-steel construction with four wheels and two wheel brakes Handle-mounted pressure release Large non-skid platform with wrap-around rubber bumper AFF Lift Table Specifications: Ship Weight 195 lbs. Hydraulic Table Cart 1,100 lb. Capacity 3904 Electric Hydraulic Pump Single Acting 650 KS400 Battery Chargers 599 699 450 416 At Associated Equipment Corp., we utilize more than 60 years of experience to create quality, American-made battery chargers, testers, analyzers and more, and our experience and expertise has enabled us to be a leader in the industry. PE172 Two-speed high performance at a low price. Ideal for maintenance and construction applications where low voltage is a concern. Generally recommended for cylinders up to 55 ton. Equipped with 3,450 rpm, single-phase, thermal protected induction motor, 10 ft. remote control cord. Low amperage draw, small generators and low amperage circuits can be used as power source. 2 gallon thermoplastic reservoir. 2-Way Valve Type. Advanced Return (Auto) Valve Function. Remote Motor Control (10ft.) on/off Control Switch 1995 6 Jaw Width 5-3/4 Jaw Opening 4-1/8 Throat Depth 64 lbs Ship Weight Kwickstart HD Pro, 12V 360CCA 6 in. Utility Vise MODEL 646HD Jaw Width 6-1/4 In., Max. Opening 6 In., Throat Depth 4-3/8 In., Pipe Capacity 1/8 to 3 In., Base Type Swivel, Rotates 180 Degrees, Jaw Type Replaceable Serrated Top Jaw, Built-in Pipe Jaw, Formed Steel Channel Beam and Casting With Large Anvil, Body Casting 30,000 psi MODEL 746 6 in. Mechanics Vise Jaw width 6 Jaw opening 5 3/4 Throat depth 4 1/8 Heavy-Duty high impact-resistant case with rubber base. Replaceable cables/field serviceable design. Excellent for job sites, professionals, heavy-duty field use. Exclusive Heavy-duty 22Ah sealed AGM Battery provides powerful Best in Class Performance. Instantly Jump-Starts without another vehicle. Pastisol coated 400 Amp Steel Clamps. UL Listed 12V 600mA Internal charger. Digital LED display with state of charge readings. Built in Digital Voltmete. 12V Power Port and USB Power Port. 12V male-tomale DC Cord Included. Patented List 399.98 310 Heavy-Duty Workbench 990 650 Worktop Capacity 1750 lbs Drawers N/A Shelf Capacity 550 lbs Shelves 2 Length 79 Width 251 4 Height 341 2 Shipping Weight 209 lbs 10-Gauge rolled edge steel work top with 2 retaining wall on sides and back (1750 lb load capacity) Two 12-Gauge steel shelves each with a 550 lb load capacity 239 Pipe jaw 1/4-3 1/2 329 MODEL 648HD 8 in. Ductile Iron Workshop Vise 4-1/2 Throat Depth Jaw Width 8, Max. Opening7-1/2, Throat Depth 4-1/2, Pipe Capacity 1/8 to 3, Ductile Iron Jaw Face, Serrated Jaw, Swivel Angle180 Degrees. Overall Length 20-5/8 Overall Height 11-3/8 Overall Width 11 319 Flexilla 50 ft. Air Hose Max. pressure: 300 psi Temp. range: -40 to 150 F 3:1 safety factor Polyurethane/Polymer Air Hose 35 Inc: Charger and two 12 volt batteries Durable carrying case Delivers up to 8000 PSI No pumping required Holds 14 oz. grease cartridge HFZ3850YW2 L1380 Grease Gun Workforce Mega Power 12V Battery Powered MODEL 101H Abrasive Cleaning Blaster Built-in funnel top for easy loading. Semi-auto pull-up closure. Features a 70,000 squeezer deadman valve, water extractor, pressure relief valves, air inlet and choke valves. It has an abrasive metering chamber, an operator blast hood, long life ceramic nozzles, hard rubber tires and 10 hose. 80-100 pound capacity and 125 psi working pressure. Dimensions: 10 diameter, 25 tank height, 33 overall. 85-100 Lb. Capacity With Type 1 Large Nozzles 10 dia. x 25 h tank on 8 wheels. Has inverted top for easy filling 510 Overall ht. 33 Ship Wt: 60 lbs. Includes 70000 squeezer valve water separator 10 long 1/2 ID abrasive hose 2 ceramic nozzles lightweight hood for face & eye protection 3 semi-automatic pull-up closure air inlet valve choke valve 139 Heavy-Duty Workbench 992 Worktop Capacity 1750 lbs Drawers 2 Shelf Capacity 550 lbs Shelves 1 Length 59 Width 251 4 Height 341 2 650 Shipping Weight 167 lbs 10-Gauge rolled edge steel work top with 2 retaining wall on sides and back (1750 lb. load capacity) Two key-lock steel drawers with full-extension, ball-bearing slides One 12-Gauge steel shelf with a 550 lb load capacity 1000 lb. Capacity Telescoping Transmission Jack 595 7793 Four 3 swivel caster wheels Low height: 35.5 ; High height: 79.5 ; Saddle tilt forward: 53 degrees; Saddle tilt backward: 30 degrees; Saddle tilt side to side: 10-30 degrees; Base size: 35 x 31.25 8005SC 350 lb. Capacity Service Cart 30 Efficiency saves you valuable time and money. This service cart brings you and your tools the mobility you crave and flexibility you need. This combination makes for the ultimate cart! It s made with chrome 16 gauge steel frame, with a durable powder coated finish. Replacement parts are available. 3 deep shelves Large, easy to maneuver 4 wheels: 2 locking and 2 standard Load capacity (Lbs.) 350 Height: 35.3 Length: 30 125 20 Volt Cordless Grease Gun MODEL 1884 3601 with 2 Batteries 2-Speed transmission provides high-volume grease flow option Versatility means one tool for all lubrication requirements. Transmission: 2-Speed High Volume & High Pressure Grease Flow Indicator: Patented Stroke Counter Hose Type: 30 High Pressure with Dual Spring Guards and 5852 Coupler List 525.00 399 Pressurized Used Oil Receiver Tank Capacity 72.0 Qts./68.1 Lt Drain Bowl Capacity 11 Qts./10.4 Lt Designed to provide a safe, affordable option for draining, transferring and evacuating motor oils, as well as transmission and power steering fluids quickly. Offers excellent mobility, easy bowl positioning and simple-to-use pressurized evacuation. 219 SJ3A016 Solitaire LED 12 1AAA Black Maglite Solitaire LED also gives you the ability to focus the beam from a wide-angle floodlight toe narrow spot beam. The high-powered LED but- Pound of this tiny titan has enough power to light up objects on the far end of a parking lot, and this keychain flashlight is tiny enough that it can live in your pocket - always there when you need it! LED 1 cell AAA Flashlight.. MODEL ML125 Led Flashlight Rechargeable System Personalize for quick access to your preferred functions: Full Power; Power Save (25%), Strobe (12 sec), SOS, Momentary On/Off Inc: portable battery charger, AC Converter and NiMH battery pack. Uses either NiMH Rechargeable Battery Pack or (3) C-Cell Alkaline Batteries. Beam Distance: 273m (Alkaline) or 258m (Rechargeable) - Note: As product improvements are made, performance may change without notice. Lumens: 197 (Alkaline) or 189 (Rechargeable) - Note: As product improvements are made, performance may change without notice 99 MODEL SP2P01H Mini PRO LED 2Cell AA Flashlight New Ultra Bright - The new Mini Maglite PRO houses a latestgeneration LED-a light engine that yields a level of performance that, back in the day, just wasn t possible in a flashlight this size. Black 22 MODEL XL200-S3016 Black LED Flashlight 38 5 modes: high power, strobe, night light, signal, and SOS MODEL ML125 Mag Charger Rechargeable Flashlight System 1 NiMh with ANSI Standard Ratings Includes: 12 Volt Auto Adaptor 110 Volt AC Converter Rechargeable NiMh Battery Pack Flashlight Body Mounting Brackets 2 Halogen Bulbs (1 in tail cap) 119
Indexing Head Body Clip Puller Head locks in 11 positions with 165 degree range of motion to optimize leverage and gain access to hard to reach fasteners Flush quick-release selector for easy repositioning of pry head. Indexing feature allows technician to access most ergonomic position. Extended length shaft to gain access in restricted places One tool has the functionality of multiple tools saving the user time 17835 5 Piece General Purpose Pliers Set 6646 Flush rivet design decreases tool profile Drop forged and heat treated construction Cutting edged are hand sharpened 119 19732 6-Piece 1/4-Inch Drive Metric Hex Bit Socket Set 2mm, 2.5mm, 3mm, 4mm, 5mm, and 6mm 1/4-inch drive hex bit sockets with a composite storage rail. Tough and reliable 1/4-inch drive 6-piece metric hex bit socket set. Patented SuperKrome finish for durability and maximum corrosion resistance. Convenient through-hole design for easy bit replacement Made in the U.S.A. Composite storage rail Warranties Return To: SK Hand Tool LLC 1600 South Prairie Drive Sycamore, IL 60178 6640 Plastic Body Clip & Rivet Removal Kit Indexing head tool locks in 11 positions with 165 degree range of motion to optimize leverage and gain access to hard to reach fasteners. Flush quick-release selector on indexing tool for easy repositioning of pry head. Both tools feature Sure Grip handles for secure grip with 57 greasy hands. 69 45 19723 3/8 Dr SAE Hex Bit Socket Set, 7 Pc 7 piece set is made in the U.S.A. Bit sockets feature SK s high polish SuperKrome finish. Through-hole design: simply pop the old bit out and insert a new replacement bit. Holder design is 9 times stronger and helps prevent the bit from slipping out of the socket while working.3/8 Drive Hex Bit Sockets - 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 55 4506 5 Piece 1/4 to 1/2 Female and 1/4 to 1/2 Male Drive Adapter Set Includes 1/4-inch (F) to 3/8-inch (M), 3/8-inch (F) to 1/4-inch (M), 3/8-inch (F) to 1/2(M), 1/2-inch (F) to 3/8-inch (M), and 1/2-inch (F) to 3/4-inch (M) drive adapters Made in the U.S.A. 36 19733 3/8 & 1/2 Drive 9 Pc. Hex Socket Set (Fractional) 3/8 Drive Hex Bits: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 1/2 Drive Hex Bits: 1/2, 9/16, 5/8 SuperKrome finish resists scratches and corrosion Through-hole design allows for convenient bit replacement New bit holder design is 9 times stronger 19734 9 Pc. 3/8 & 1/2 Drive Metric Hex Socket Set SuperKrome finish resists scratches and corrosion Through-hole design allows for convenient bit replacement New bit holder design is 9 times stronger 3/8 Drive Hex Bits: 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm 1/2 Drive Hex Bits: 12mm, 14mm, 17mm HFZ3805YW2B Flexilla ZillaWhip 3/8in x 5ft. ZillaGreen Ball Swivel Whip Hose 300 PSI -40 0 F to 140 0 F 1/4 in MNPT ball swivel x 1/4 in FNPT 18 79 89 9720 7 Pc. 1/2 Drive Fractional Jumbo Straight Crowfoot Wrench Set 59 CR-MO alloy steel for long life Lifetime warranty Reusable blow molded storage tray Set includes- model number and size in SAE inches: 97732 1, 97734 1-1/16, 97736 1-1/8, 97738 1-3/16, 97740 1-1/4, 97760 1-3/8, 97744 1-1/2 9707 7 Pc. Jumbo Fractional Combination Wrench Set CR-MO alloy steel for long life Lifetime warranty. Comes with sturdy metal clip for storage Raised panel design Set includes- model number and size in SAE inches: 942 1-5/16, 956 1-3/4, 944 1-3/8, 960 1-7/8, 948 1-1/2, 964 2, 952 1-5/8 99 4507 9916 9927 3/4 Drive Metric Impact Hex Driver Set Forged from the finest chrome molybdenum alloy steel. Sockets are laser etched and roll stamped for lasting size recognition. Extends the life of fasteners. Blow molded storage case.set includes metric mm: 14mm, 17mm, 19mm, 22mm and 24mm Young Bros. Number Stamps 03091 1/8 20 05091 3/16 25 89 6 Pc. Fractional Angled Head Jumbo Raised Panel Wrench Set High density drop forged alloy steel for strength. 15 0 and 60 0 angled ends for easy access. Comes with convenient metal clips for storage. Includes sizes: 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 Heat-treated the entire length Has a cellulose acetate handle which is ergonomically designed Hardened and tempered the entire length for maximum durability 92 Dominator Pry Bars 7 Pc. Jumbo Metric Angled Wrench Set CR-MO alloy steel for long life Lifetime warranty. Canvas pouch included 15 degree and 60 degree angled ends for easy access. Set includes- model number and size in Metric mm: 991426M 26, 991430M 30, 991427M 27, 991431M 31, 991428M 28, 991432 32, 991429M 29 59 Length List Sale 40138 36 inch 89.00 71.00 40139 42 inch 98.00 78.00 40160 48 inch 133.58 109.00 40162 58 inch 145.00 115.00 MECHANICAL GRIP-O-MATIC PULLERS Jaw Order Max Max Screw Size Thickness Width Capacity Style Number Reach (in) Spread (in) (in) (in) (in) & Weight 1020 2 1/8 3 ¼ 5/16-24 x 3 7/8 9/64 9/64 1 ton 2 jaw 5 oz 48.00 1021 2 1/8 3 ¼ 5/16-24 x 3 7/8 9/64 9/64 1 ton 3 jaw 8 oz 70.00 1022 3 3/8 4 3/8-24 x 4 7/8 upper 3/16 upper 3/16 2 ton 2 jaw 14 oz (rev jaw) 49.00 lower 1/8 lower 1/8 1023 3 3/8 4 ¾ ¾-24 x 4 7/8 upper 3/16 upper 3/16 2 ton 2/3 jaw 1 lb 5 oz (rev jaw) 65.00 lower 1/8 lower 1/8 1024 3 ¼ 6 9/16-20 x 6 15/16 upper 15/16 upper 15/16 5 ton 2 jaw; 1 lb 12 oz. (rev jaw) 60.00 lower ¼ lower 1/4 1026 3 ¼ 7 9/16-20 x 6 15/16 upper 15/16 upper 15/16 5 ton 2/3 jaw; 2 lbs 12 oz. (rev jaw) 88.00 lower ¼ lower 1/4 1025 5 ½ 6 9/16-20 x 6 15/16 upper 5/16 upper 5/16 5 ton, long jaw 2 lbs (rev jaw) 68.00 lower ¼ lower 1/4 1027 5 ½ 7 9/16-20 x 6 15/16 upper 5/16 upper 5/16 5 ton, long 2/3 jaw; 3 lbs 10 oz (rev jaw) 89.00 lower ¼ lower 1/4 1035 5 9 11/16-18 x 9 upper 5/16 upper 5/16 7 ton, 2 jaw; 4 lb 8 oz (rev jaw) 112.00 lower 11/32 lower 11/32 1037 5 10 ½ 11/16-18 x 9 upper 5/16 upper 5/16 7 ton, 2/3 jaw; 6 lb 2 oz (rev jaw) 145.00 lower 11/32 lower 11/32 1036 8 ¾ 9 ½ 11/16-18 x 9 11/32 11/32 7 ton, long 2 jaw; 5 lb 6 oz 115.00 1038 8 ¾ 11 11/16-18 x 9 11/32 11/32 7 ton, long 2/3 jaw; 8 lb 2 oz 147.00 1039 11 12 13/16-16 x 12 9/16 9/16 13 ton, 2 jaw; 10 lb 13 oz 206.00 1040 15 ¼ 15 ½ 13/16-16 x 12 9/16 9/16 13 ton, long 2 jaw; 13 lb 205.00 1041 11 12 13/16-16 x 12 9/16 9/16 13 ton, 1/2 jaw; 16 lb 4 oz 296.00 1042 15 ¼ 17 13/16-16 x 12 9/16 9/16 13 ton, long 2/3 jaw; 18 lb 12 oz 302.00 1044 18 ¾ 16 1-14 x 13 ½ 13/16 13/16 17 1/2 ton, long 2 jaw; 26 lb 380.00 1045 14 ½ 14 1-14 x 13 ½ 13/16 13/16 17 1/2 ton, 3 jaw; 33 lbs 573.00 1046 18 ¾ 16 1-14 x 13 ½ 13/16 13/16 17 1/2 ton, long 3 jaw; 37 lbs 596.00 1048 22 ¼ 20 1 ¼-12 x 16 5/8 1 1/16 11/16 25 ton, long 2 jaw; 42 lb 12 oz 662.00 1050 22 ¼ 20 1 ¼-12 x 16 5/8 1 1/16 11/16 25 ton, long 3 jaw; 60 lb 910.00 WE CARRY A LARGE VARIETY OF 1-25 TON MECHANICAL GRIP-O-MATIC PULLERS 395 DS1210-G-K Under Counter Depository Safe Dimensions: Outside: 12.00 H x 8.00 W x 10.00 D Inside: 10.25 H x 7.50 W x 9.00 D Interior Cubic Feet: 0.40 Weight: 47.00 Burglar Rating: B-Rate Features: Cash slot for easy insertion of cash and checks without unlocking. Anti-fish baffle deters removal of contents. Heavy gauge steel construction. Unique Design permits bolting and mounting to any structurally sound surface. Affordable protection. Dual-Key Lock, Standard PS915-B-E Handgun/Pistol Safe Features: Electronic push button lock. Manual key override. Programmable 3-6 digit entry code. Mounting plate, cable and hardware included. Outside Dimensions: 4.25 H x 9.50 W x 14.00 D Inside Dimensions: 3.00 H x 8.00 W x 9.00 D Interior Cubic Feet: 0.13 Weight: 15.00 210 5
MODEL 72000EI 1 1/2 Ton Transmission Jack Wide chassis with open front provides: Wider opening for saddle and transmission to come lower to the ground for easy removal. Efficient load distribution and stability. Easy access to saddle tilt knobs. Fully adjustable universal saddle with adjustable arms to position the transmission. Heavy duty chain with convenient chain tensioner secures load to the saddle. Safety by-pass system prevents damage to the hydraulic cylinder. Safety overload system prevents jack from being used beyond its rated capacity. Full 360 degree rotating handle operates in any position. Flash chromed ram inhibits rust from entering the hydraulic system. Four full-swivel ball bearing caster wheels for easy positioning. Low Lift Height 7.75 High Lift Height 36.5 Length 45 Width 28 Saddle Size 10.25 x 15.25 Shipping Weight 310 lbs. 1211 MODEL 72036C 5 Ton Fork Lift Truck Two lift points (saddle & post) for numerous lifting applications. Two - position saddle at scissors end can be quickly rotated to handle either edges or flat surfaces of a load. 2-1/2 low lift height at scissors end. 30 removable handle for ease of pumping and storage when not in use. Metered release mechanism provides slow, controlled lowering of the load. Safety overload valve prevents jack from being used beyond its rated capacity. 504 MODEL 76320A 20 Ton Air Actuated Hydraulic Bottle Jack List 447 305 10.875 min. height, 20.5 max height. with 6.75 stroke Effortless air operation will greatly reduce operator fatigue and speed up the efficiency of garage work. A compact, yet powerful Air TurboMotor is equipped to raise the load to the desired height efficiently, effortlessly, and safely. Features Three-way heavy duty air valve provides fine control when lifting or lowering a vehicle. Automatic safety lock engages in six different height positions independent of air pressure. Designed for lifting entire front or rear of a vehicle. Front swivel caster wheel and two 12-1/4 diameter pneumatic rear tires provide easy maneuverability. Adjustable lifting saddles can be raised and extended to desired position. Lift Height @ Post Low 17.375 High 31 Lift Height @ Scissors Low 2.5 High 18.25 Length 30.25 Width 8.375 Shipping Weight 104 lbs. Versatile Quick Connector design provices for easy List 4162 removal of air hose from air motor allowing compact storage or remote operation. Fingertip remote control for added safety without sacrificing the manual operation. MODEL 82999 10 Ton Capacity Air Lift Jack INTENDED USE: Truck and farm equipment dealer garages, heavy duty construction repair shops and bus company garages. 2500 FREE FREIGHT 6 MODEL 82990C 10 Ton Capacity Portable Air Lift Jack Garages / repair shops of truck, farm equipment, construction equipment and bus companies. May be used in pairs. Ideal for crowded conditions that require single point contact. Three-way heavy duty air valve provides fine control when lifting or lowering a load. Extension tubes and detent pins offer multiple lifting heights. Unit easily maneuvered on two 8 diameter rubber tread wheels. Removable handle and 8 air hose for remote safe positioning and operation. Lifting saddle with serrated surface and locating lugs. Low Lift Height 17.75 High Lift Height 49.375 Stroke 11.5 Length 58 Width 13.625 Height 17.75 MODEL 71233C 2 Ton Capacity Double Pump Floor Jack An economical floor jack designed for a variety of automotive shop uses where strength, speed, and dependability are required. Covered by a one year limited warranty. Extremely low 2 3/4 low lift height. Safety by-pass system protects pressure cylinder. Safety overload system prevents jack from being used beyond its rated capacity. Heavy duty chassis for added strength and dependability. Long two-piece handle for easy shipping and storage. Foam handle sleeve is included to protect vehicles from damage. Dual pump piston design raises the jack to maximum height in 8-1/2 pump strokes. U-joint release mechanism for more control. Shipping Wt 178 lbs. 256 699 27202 Blow Gun Fluid : Air Brass insert : 1/4 FNPT Pressure : 145 PSI Temperature : 5 F to 158 F Construction : Composite MB13 18 MB20 24 3909 10 Ton Hydraulic Gear Puller MS13 18 MS20 24 Blow mold case for ease of transportation. CR-MO alloy steel jaws for greater strength and performance. Provides up to 10 tons of pulling force with hydraulic ram. Makes 8 different pulling combinations for total versatility Pulling Force (Tons) 10 165 Flat Body Cylinder Kits with Case Various height magnetic adapters. Perfect for low clearance areas needing a little height boost. Maximum working pressure: 10,000 psi / 700 bar. Carrying case HF0503B 5 Tons 0.24 HF1005B 10 Tons 0.43 HF2005B 20 Tons 0.43 HF3005B 30 Tons 0.51 225 349 575 650 22903 Black 10000 PSI Air Actuated Hydraulic Treadle Pump User friendly foot-actuated design for easy control. Provides up to 10,000 PSI from standard shop air supply of 110-175 PSI. Made of durable light weight corrosion-free aluminum. Efficiently operates many industrial and construction. Single acting ram applications List 483 AERO-MOTIVE 15F Balancer 8-15 Lbs 8-15 lbs./3.6-6.8 kg. weight capacity, 8 ft./2.4 m cable travel with ratchet lock. Heavy duty balancers are used to balance or retract a suspended tool or object and are ideal for heavy duty tool, pendant and hose support. The heavy duty balancer has easy tension adjustment, heavyduty steel construction, and has a long lasting mainspring. The FLR models have a ratchet lock. Limited Quantities MODEL 81255I 22 Ton Capacity Jack Stands Fleet and maintenance garages where low profile stands are used to support loaded trailers. Pin type support column adjusts to four different height positions. Adjustment pin is secured to stand to prevent loss. Handle provides ease of positioning and carrying. 3/8 thick solid steel base plate for added stability. DIMENSIONS: Low Height 12 High Height 20 Height Intervals 3 x 3 Base Size 10 x 10 139 Saddle Size 2.25 x 3.25 Shipping Weight 66 lbs. 242 MODEL 920020 20 Ton Capacity Collision / Maintenance Repair Kit (Forged Adapters) A deluxe kit for repairing heavy road machinery, trucks, farm equipment and also used for some heavy construction applications. Kit Weight: 152 lbs. Two steel cases with carrying handles share the weight for easier handling of kit. Two-speed pump quickly raises ram to load and secondary pump provides powerstroke - Steel Case (1 of 2) - 2-Speed Pump - 5 Hose - 5 Stroke Ram - 3-1/2 Diameter Saddle (2) - Threaded Coupler (3) - Toe Lift - Wedge Head - Vee Head - Steel Case (2 of 2) - 3 Extension Tube (2) 5000A 16-Speed Floor UL/CSA Drill Press 339 Voltage 115 volts 495 RCP-C7581V 5002A Bench Grinder with Light, 8-In. Comes with two grinding wheels, coarse 36 grit and medium 60 grit. Built in bright, flexible work light. Each wheel has protective spark guard and adjustable eye shield. Cast iron base for durability. Mounting holes and rubber feet Special 149 MODEL 4431 1/2 Regulator, Filter, Lubricator With Metal Bowl Body Size 1/2 Port Size 1/2 Poly Bowl 4430 Metal Bowl 4431 139 7.5HP Cast Iron Air Compressor Two Stage Electric Tank Capacity (Gallons): 51-100 Power Source: Electric Max Power (CFM): 16-30 2795 Thick Steel Construction Heat Treated Drop Forged Safety Hooks Different Chain Lengths Available On Request 5-YEAR Manufacturer s Warranty Rated Capacity 1365 Heavy duty 3/4 HP motor with 5/8 drill capacity Convenient belt tension lever for quick speed transition Table rotates 360 and pivots from 0 to 45 on each side with indicator to facilitate setting UL and CSA Listed Item Weight 138 pounds Product Dimensions 61.8 x 18.5 x 10.9 inches Power Source corded-electric - 5 Extension Tube - 10 Extension Tube - 20 Extension Tube - 27-1/2 Extension Tube - 6-1/2 Diameter Base (2) MODEL HW93733 20 Ton Air/Hydraulic Jack Compact, powerful design quickly lifts rated capacity Large 8 rubber wheels Low height allows lifting from axle or suspension Pressure relief valve prevents overloading Rapid two-speed air hydraulic action quickly advances ram to load Chrome plated plunger for extended jack life Specifications Capacity: 20 Tons Minimum Height: 9 Maximum Height: 19-3/4 Power Raise: 6 Handle Length: 45 1295 Base Size: 8 x 17 Extension Screw: 4-3/4 Operating Pressure: 90-140 psi. Gross Weight: 87 Lbs. Chain Pullers Standard Lift Diameter(in) Diameter(mm) Chain Distance between Hooks Minimum Pulling/Handle Net Weight FALLS 405 1/2 Ton 10 1/4 6 mm 10 13/16 52 lbs 24.3 lbs 410 1 Ton 10 1/4 6 mm 12 11/16 69 lbs 28.7 lbs 119 99 PULLERS 605-10 3/4 Ton 5 1/4 6 mm 13 1 13/16 17.7 lbs 159 615-10 1 Ton 10 1/4 6 mm 12 11/16 69 lbs 28.7 lbs 199 635-10 1 Ton 10 1/4 6 mm 12 11/16 69 lbs 28.7 lbs 295
MODEL 9637 Hydraulic Oil For dependable performance of all your hydraulic pumps and cylinders. Contains foam 43 suppressant additives and has a high viscosity index. MODEL 9639 Flame-Out 220 fire resistant hydraulic fluid*. Contains anti-rust, anti-foam and antisludge additives. Provides fire resistant protection. (Note: Will burn if heat source is extreme enough. Will not, however, propagate the flame and is self-extinguishing when there is no ignition source.) Provides maximum lubrication and heat transfer. Offers a wider operating temperature range. No need to change seals in your Power Team equipment MODEL 61104 111 MODEL 9645 Biodegradable Hydraulic Fluid Biodegradable, non-toxic fluid withstands moderate to severe operating conditions; provides excellent protection against rust. Offers superior anti-wear properties, has excellent multi-metal compatibility. 83 14 Pc. Punch & Chisel Set Drop Forged, heat treated, high carbon steel. Includes: 1 pc center punch, 4 pc pin punches: 13/17 x 6, 4/32 x 5, 1/4 x 6. 5 pc cold chisels: 1/2 x 6, 5/8 x 7, 3/4 x 7, 7/8 x 8, 1 x 8-1/2. 4 pc taper punches: 6/17 x 10, 5/32 x 9, 2/15 x 10, 2/15 x 8-1/2 39 MODEL 71500 Hydra-Krimp Mastercool s patented Hydra - Krimp makes crimping barbed and beaded fittings as easy as 1-2 - 3! The lightweight hand-held hydraulic press is very portable and ideal for shop and field applications. The kit comes with a complete set of dies covering hose sizes #6, #8, #10, #12 and reduced barrier #6, #8, #10 and #12. The dies snap quickly into the press fixture requiring no pins or screws. (patent# 6,324,884) Custom molded case. 645 John Dow MODEL FC-25GC 25-Gallon Steel Gas Caddy UL Listed Heavy-duty, UL listed cast iron pump with carbon vanes with two-way operation for either. For use with Unleaded Gasoline, Kerosene, & Diesel fuels. Heavy-duty 10 steel wheels. Fill level gauge. List 994.00 650 MODEL PB-12 Parts Return Bags 12in x 22in - Roll 500 49 WorkStar 220 Pocket Inspection Flashlight LED Brightness: 120 emitter lumens. LED, Color, Power: Cree XP-E, Cool White. 3 Watt. Batteries included: 3 AAAA alkaline. Run time with alkaline batteries: 2 hours to half brightness & 4 hours useable light with typical MNXO 2000 Technician s Floodlight Brighter than competing work lights. Brilliant white wide angle beam. Uniform light pattern with no hot spots or dark spots. High impact PC, except neck and hook, which are glass reinforced ABS. Rechargeable NiMH batteries, 2+ hr on HI, 8+ hr on LO 69 19 MODEL 71475 Universal Hydraulic Flaring Tool Set This kit fabricates Push Connect 1/4, 5/16 and 3/8 ; GM Fuel Line Flare, Brake Lines and Transmission 5/16 and 3/8 ; Flare/Double Flare 3/16, 1/4, 5/16, 3/8 and 1/2 ; Metric Bubble Flare 4.75, 6, 8, and 10mm. Comes in a custom molded box. 385 343076 Tank Package 995 9968 5:1 Oil Pump 1 Stub-Style American made airoperated oil pump works well in over 90% of applications. Quick Lube, Auto Repair Shop, & Car Dealerships all find the Alemite 9968 RAM oil pump in operation. For use with all forms of motor oil, transmission fluids, and gear oil. Downtube extra. 8078-D 1/2 x 50 Oil Reel Heavy Duty open-style oil reel comes with a 50 foot 1/2 inch oil hose. Works in 95% of all applications. Alemite has designed this oil reel so it can be mounted on the ceiling, wall, or floor. AC35 Double Flare & Metric Bubble Flaring Tool Set MODEL 71450 This kit fabricates flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2 ; and metric bubble flare 4.75, 6, 8 and 10mm. Comes in a custom molded carrying case QUANTITIES LIMITED 3670 Electric Meter Displays current delivery in quarts and totalizes in gallons. Comes with a hard pipe and a manual non-drip nozzle. Powered by two standard AAA batteries. Rugged and Reliable. Picture shows model 3670- B with hard pipe. 7936 1/4 Filter Regulator 1/4 Mini Regulator and Filter/Moisture Separator with auto-dump. Inlet/ Outlet 1/4 NPTF(f). RotoBrute Economy Portable Magnetic Drill Press 795 2200-Pound Magnetic Strength, High Torque 1200-Watt Motor and 600-Pound No-Load Speed Quick Release Arbor Enables Cutter Change in Seconds 1-3/8-Inch Diameter by 2-Inch Depth Capacity, 6-1/2-Inch vertical travel. Cuts Ferrous and Non-Ferrous Metals. Application examples include: Steel fabrication, Bridge and highway maintenance, truck and trailer manufacturing, Construction sites, Mining, ship building, refineries, welding, etc 369 MODEL 26317 41 Piece Metric Tap & Hex Die Set Die Type: Hexagon Tap Type: Plug Inc: (16) Metric 3 mm - 0.50 thru 12 mm - 1.75, Pipe 1/8 in - 28 BSP, Taps, Dies, Tap Wrenches, T-Handle Wrench, Pitch Gauge/s, Plastic Case 139 5 Ton Long Chassis Hydraulic Service Jack MODEL 22050 Handle actuated release valve provides metered control at any desired lowering speed Wide stance and low center of gravity provide optimum stability under load stress Heavy gauge, steel frame helps prevent distortion and twisting A built-in by-pass device protects hydraulic system from over pumping damage 725 1295 5-ton capacity Minimum Height: 7 Maximum Height: 27 Handle Length: 42-1/8 00373 (HWI) Hydraulic Impact Wrench and Drill Torque: 500 ft-lbs @ 8 gpm (677 Nm @ 30 lpm) Weight: 6.5 lbs (2.93 kg) Length: 8.2 (208 mm) Width: 4.2 (107 mm) Height: 11.0 (280 mm) Hydraulic System: Super Spool Selector for Open and Closed Center Systems Flow Range: 4-12 gpm (15-46 lpm) Optimum Flow Range: 5-8 gpm ( 19-30 lpm) Operating Pressure: 1000-2500 psi (69-170 bar) Pressure Port Thread: 9/16-18 SAE O-ring Return Port Thread: 3/4-16 SAE O-ring MODEL 26319 Machine Screw w/fractional or Metric Tap and Hex Die Super Set, 41-Piece Ideal for automotive repair and machinery where metric threads are specified Ideal for maintenance for repair work Machine screw taps designed with straight flutes that are ground to provide rapid chip removal do efficient threading Set comes in a plastic case for safe storage 10 Ton Long Chassis Service Jack MODEL 22100 Handle actuated release valve provides metered control at any desired lowering speed. Wide stance and low center of gravity provide optimum stability under load stress. Heavy gauge, steel frame helps prevent distortion and twisting. A built-in by-pass device protects hydraulic system from over pumping damage 10-ton capacity Minimum Height: 7 Maximum Height: 27 Handle Length: 42-1/8 Saddle Diameter: 7-3/8 1095 3400 Fuel Transfer Pump For quick transfer of diesel, kerosene or mineral spirits This versatile pump is designed for use in agricultural, construction, fleet and other mobile applications. The 12-volt DC 3400 quickly transfers fluid from mobile or stationary fuel tanks to vehicles and equipment at a flow rate of 15 gallons per minute Self priming pump with overload protection 30 minute duty cycle Unique, multip-piece telescoping pick-up tube for wide range of tank depths 13-foot commercial grade, no-kink, anti-static hose Standard 2-inch NPT bung fits most tanks and barrels Cast-iron pump with low-friction composite polymervanes 349 139 MODEL 3018002 29-Piece Cobalt M-35 Metal Index Drill Bit Set with Case Cobalt steel extends cutting edge life and maintains cutting life after resharpening. Extra hard drill for greater wear. 135-Degree split point tip starts on contact, cuts with less force. Reduced shank above 3/8-Inch allows the use of larger drill bits in a 3/8- Inch chuck. Rubber overmolded case protects kit if dropped18 leaf standard thread pitch gauge and screwdriver 4 Ton Porto Power MODEL B65114 List 291.00 189 10 Ton Porto-Power MODEL B65115 List 467.00 339 Versatile 4-ton Porto-Power set and 10-ton Porto- Power Body Repair Kit has snap-lock extension tubes for quick, easy assembly. Automatic pump overload system helps prevent damage to rams and equipment. Flex head features permanently molded rubber pad, interlocked to prevent separation. 1/2-ton capacity spreader has 2in. jaws and spreads from 5/8in. to 3 3/4in. Includes plastic tool case. Ram Pump Ram Ram Ram Capacity Capacity Close Hgt Ext Hgt Eff Area GW B65114 4 ton 8,000 psi 11 15-3/4 1.0 in 2 46 lbs B65115 10 ton 10,000 psi 13 5/8 19-3/4 2.4 in 2 88 lbs Diaphragm Pumps Air Operated 119 Alemite Diaphragm Pumps are designed for both high volume transfer and dispensing a variety of low viscosity fluids including new oil, used oil, windshield washer fluid, antifreeze, and other materials. 8322 435 Air Inlet: 1/4 Body: Aluminum Diaphragm: Buna Pressure: 100 PSI Inlet/Outlet: 1/2 8323 595 Air Inlet: 1/2 Body: Aluminum Diaphragm: Buna Pressure: 125 PSI Inlet/Outlet: 1 7
Keep down time to a minimum with well maintained tools & equipment Specializing in the Repair of Most Major Brands! HYDRAULIC EQUIPMENT cylinders jacks porto powers presses pumps AIR TOOLS drills grinders impacts pavement breakers sanders, etc. LUBRICATION EQUIPMENT grease & oil pumps hose reels meters valves Thousands of genuine replacement parts in stock All Work Guaranteed Estimates Available on Request Complete Service on Hydraulic and Tools PRESORTED STANDARD US POSTAGE PAID Syracuse, NY 13220-9600 Permit #1263 HYDRAULIC EQUIPMENT Cylinders, Jacks, Porto Powers, Presses, Pumps American Forge & Foundry Astro Ausco Blackhawk Drednaut Duff-Norton Enerpac Gray Greenlee-Fairmount Hein-Werner HK Porter Lift-Rite Lincoln Marquette Milwaukee Napa Norco Omega OTC Power Team Ram-Pac Simplex Sunex Templeton-Kenly US Jack Walker Weaver Wheeler Rex AIR TOOLS Drills, Grinders, Impacts, Pavement Breakers, Sanders, Etc. American ARO Astro Atlas Copco Buckeye Cleco Dotco Dynabrade Florida Gardner-Denver Henry Hutchins Ingersoll-Rand Kent Master Power National Detroit Nitto Kobki Sioux St. Louis Sullair Superior Thot Top Cat Unitec Universal Uryu Viking LUBRICATION EQUIPMENT Grease & Oil Pumps, Hose Reels, Meters, Valves ARO Alemite 14 95 Balcrank Graco Lincoln National Spencer FULL LINE OF NEW TOOLS & EQUIPMENT Thousands of Genuine Replacement Parts in Stock All Work Guaranteed Estimates Available on Request Serving the Automotive, Construction & Industrial Market Since 1926 PneumatiVac MODEL 7300 Operates on compressed air to create a powerful venturi vacuum for draining fluids from tanks and reservoirs. Compressed air hose attaches at base for stability.includes accessories for draining engine oil or transmission fluid directly through the dipstick tubes. Also includes brake/clutch bleeding kit ( No. 07205) for vacuum bleeding hydraulic brake and clutch systems. Tub O Towels 90 Count Heavy-Duty Multi-Surface Fresh Scent Cleaning Wipes with Lanolin, Vitamin E, and Aloe Vera 109 Electronic Specialties ESI 710 500 Amp Carbon Pile Load Tester 500 amperes adjustable load carbon pile, tests batteries rated as high as 1000 CCA or 160 amperes hour. Can also test alternators, regulators and starters. 500 amp side terminal clamps and heavy duty stranded copper cables. Meters are color coded for simple pass or fail diagnostics. 15 second test with audible tone 333 Pro Laser/Contact Tachometer For Automotive, Marine, Small Engine, HVAC & Industrial Technicians RPM Range: 0 to 99,999 RPM Accuracy: + 0.05 percent + 1 digit Sampling time: 0.5 sec. Memory: Min/Max/Avg - Stores 10 Records Resolution: 0.1 RPM (0 to 999 RPM) 129 ACE HYDRAULIC & PNEUMATICS www.acehydraulic.com Reelcraft Samson Includes: Ingersoll Rand Throttle valve face Motor Tune-Up Kits Throttle valve spring Reverse valve bushing seal (2) Reverse valve detent ball Reverse valve detent spring Rear rotor bearing Front rotor bearing Rear rotor bearing retainer Vane packet (set of 6 vanes) End plate gasket Hammer case gasket Socket retainer Retainer o-ring 231TK3 39 Cooling System Pressure Test Kit MODEL 4560 Makes automotive cooling system testing simple, efficient, and economical. It combines our unique hand pressure pump with four cooling system test adapters and two dual-function cap test adapters to quickly reveal external cooling system leaks and detect internal leaks and defective caps. 244TK2 41 60 45 261TK2 83 125 1 RPM (over 1000 RPM) Display: 5 digit LCD w/backlighting Uses include: diesel engines, generators, compressors, industrial engines & equipment, fans, gears and more. Storage case included Silverline Elite Automotive Kit MODEL 8500 Used for one-person brake bleeding. Produces vacuum or pressure at the turn of a switch. Comfortable ergonomic design. One-finger trigger vacuum/pressure release. Pressure and vacuum are created on the squeeze stroke for superior accuracy and control. Includes durable, accurate diaphragm style compound pressure/vacuum gauge. 13C 13 pc Metal Cased Bright HSS Drill Set Designed for general purpose drilling under a wide range of operating conditions in various materials. Surface treated with a black oxide finish for abrasion resistance and improved coolant adherence. Specifications: 1/16 thru 1/4 x 64ths Straight Shank 118 degree Point HSS 26 X2-1-6 Straight Flute Screw Extractor Set Straight flute screw extractor set - #1 thru #6. 65 Mag-Tac Crowned Bezel LED Flashlight 3 Modes: Momentary Full Power Strobe 320-lumen beam 12 Hz strobe 69 95 US-BK8P 235 8 pc Contractor Series Carbide Bur Kit #USA5: 1/2 Cylinder Shaped Double Cut #USC3: 3/8 Cylinder Radius End Double Cut #USC5: 1/2 Cylinder Radius End Double Cut #USD5: 1/2 Ball Shaped Double Cut #USF3: 3/8 Tree Shaped Radius End Double Cut #USF5: 1/2 Tree Shaped Radius End Double Cut #USG3: 3/8 Tree Shaped Double Cut #USL4: 1/2 Taper Radius End Double Cut Plastic Case X1-1-6 Spiral Flute Screw Extractors Left Hand Spiral Flute Spiral Flute Extractors #1 thru #6 We Carry a LARGE SELECTION of CUTTING BITS for Magnetic Drills 29 95 19 95 Liquid Filled Gauges 0-10,000 PSI 2 1/2 Inch Face Starting at 39 95 TWISTERXGO BlackGold 29-Pc Twister Set M7 molybdenum high speed steel provides superior strength and durability. More holes per drill than ordinary twist drills, especially in cordless power tools. Functional black and gold surface treatment holds lubricant for smoother drilling. Meets NAS 907B aircraft specification. Water resistant, durable plastic case. Includes 1/16 thru 1/2 x 64th 139 TERMS and CONDITIONS: Prices subject to change without notice in accordance with manufacturing costs. We have the right to limit quantities. SUPPLIES MAY BE LIMITED. We are not responsible for typographical errors. All returns MUST be unused and in original box. NO RETURNS ON SPECIAL ORDERS. NO C.O.D.