Price LIST n

www.pichonindustries.com EDITION 2014/05 SLURRY TANKERS SLURRY MIXERS POWER JETTING TANKS Price LIST n 37-2012 Tel: +33 298 344 100 - Fax: +33 298 344 120

NOTE: SWITCH BOARD: +33 298 344 100 FAX : +33 298 344 120 EMAIL: info@pichonindustries.com SPARE PARTS: +33 298 344 121 FAX SPARE PARTS : +33 298 344 103 EMAIL: service@pichonindustries.com 2 TECHNICAL TRAINING PERIOD AT FACTORY AVAILABLE ON REQUEST. The Prices are effective from the 1 ST June 2012. They are listed in euros excluding taxes and can be modified without prior notice.

CONTENTS INFORMATIONS Our different services............................................................................ 4 Pichon shop................................................................................... 5 How to prepare a quotation?...................................................................... 6 Quotation / order sheet for machinery/ tankers - Conditions of sales........................................ 8 TANKS Tanks for TCI 1 axle / TCI 2 axles / TCI 3 axles........................................................ 12 Rear doors - Pipe supports....................................................................... 14 Mudguards - Lights............................................................................ 15 Fill points - Top Fill - Sight tubes - Sight glass - Hydraulic internal mixers..................................... 16 Accessories - Slope ground kit - Weight transfer system.................................................. 17 Drawbars with & without hitch - Bolted hitch - Drawbar foot............................................. 18 VACUUM PUMPS Air cooled/water cooled/ Liquid ring vacuum pumps................................................... 19 Simplified & Industrial hydraulic drive unit........................................................... 20 Overfill securities - P.T.O. Shaft.................................................................... 21 Double Pump - Rain gun - Lobe pump............................................................. 22 Centrifugal pump: Flowmaster.................................................................... 23 WHEELS - AXLES Wheels..................................................................................... 24 Axles....................................................................................... 26 Bogie...................................................................................... 28 Tandem axle: Leaf spring suspension................................................................ 30 Tri axle: Leaf spring suspension.................................................................... 31 40 KM-H additional kit........................................................................... 31 Extras hydraulic and Delta suspension- Automatic greasing............................................... 32 Extras brake - Free steering axle - Forced steering axle................................................. 33 FILLING Hydraulic and manual valves - Suction pipes - Elbows.................................................. 34 Autofiller: Bi-Directional BP2 / Scrapper autofiller...................................................... 35 Autofiller: Plunger Model........................................................................ 36 Autofiller: Turret Arm Autofiller..................................................................... 37 Radio controlled opening of industrial hydraulic valve.................................................... 37 SPREADING Spreader plates............................................................................... 38 Rear linkage.................................................................................. 38 Spreader bars: Double nozzle..................................................................... 39 Spreader bars: Multi nozzle...................................................................... 39 Spreader bars: Dribble bars....................................................................... 40 Spreader bars: Extras............................................................................ 41 Electronic flow controler......................................................................... 41 Injector: Arable tine injector / Stubble disc injector..................................................... 42 Injector: Universal Trailing shoe / «Big D» injector..................................................... 43 ELECTRIC - HYDRAULIC CONTROL SYSTEM Hydraulic distribution: Electric control / Radiocontrol................................................... 44 Touch screen control - Hydraulic coupling............................................................ 45 Hydraulic connexions - Electric connexions........................................................... 45 JETTING - WASHING Example of quotation for power jetting tank........................................................... 46 Equipments for jetting machine - Accessories - Groups.................................................. 47 Hydraulic doors - Sucking arm - Suction reels........................................................ 48 Reels - Nozzles - Galvanized tipping............................................................... 49 Hydraulic cleaner - Hook lift tankers............................................................... 50 SLURRY MIXERS Slurry pumps.................................................................................. 50 Slurry mixers B31/B4/B41/B410.................................................................... 51 THIS IS A MACHINERY PRICE LIST. IT IS NOT TO BE USED AS A SPARE PARTS PRICE LIST, AS LABOUR IS INCLUDED. PICTURES INCLUDED ARE NOT CONTRACTUAL. ATTENTION, ANY MODIFICATION OF VALIDATED ORDER IS NECES- SARILY SUBJECT TO ADDITIONAL CHARGE. 3

INFORMATIONS OUR DIFFERENT SERVICES VISIT OUR FACTORY We invite our network of dealers, accompanied or not by their customers, to visit our factory based in Guipavas, Finistere. We also propose demonstrations of machines on site. PRODUCT TRAINING Our network can benefit from technical and sales trainings in our factrory. COMMERCIAL SERVICE Our sales representatives are at your disposal to assist you in selling our products. Specialists in PICHON solutions, they can advise you and your customer in the realization of the ideal offer. We invite you to meet them at the various agricultural fairs. DELIVERY SERVICE We deliver the machines thanks to our own fleet of trucks and our experienced drivers. Machines can be also packed and sent by containers worldwide. FIRST USE ASSISTANCE You can benefit from our technical assistance for first use service. On site assistance on request. AFTER-SALES SERVICE Our qualified technicians are glad to assist our customers. You can download the assistance form request in our website. STORE Our technicians can help you to find the parts within our large stock available. We have a wide choice of spare parts for slurry tankers that we send worldwide by normal or express freight. SPARE PARTS PICHON dealers have access to more information: Prices, instruction manuals, forms : www.pichon-sav.com 4

INFORMATIONS PICHON SHOP WORK SUIT - Overall red suit with a double zip (2 zipper-pulls) - Very practical: easy to pull on and to pull off - 2 chunky-knit front zippers on the entire height - Multiple pockets for different functions: 2 front zip pockets, 2 leg pockets, 1 back pocket and 1 screwdriver pocket - Mandarin collar - Elasticated waist - PICHON embroidery on chest and behind the suit Material: 20% polyester, 80% cotton Maxi washing temperature: 60 C WAISTCOAT - Black waistcoat sleeveless - 2 front zip pockets - PICHON embroidery on the front Material: 100% polyester Maxi washing temperature: 30 C Sizes : M - L - XL - XXL Sizes : M - L - XL - XXL CODE PRICE G-0197 40 CODE PRICE G-0198 15 CAP - PICHON embroidery on the front - Rigid peak - Adjustable with the metal backstrap Material: 100% cotton CODE PRICE G-0196 3 KEY RING - Chrome metal - Diameter 40 mm CODE PRICE G-0195 1 FLAG - Height: 2 m - Width: 0,80 m - Made for a support bracket CODE PRICE G-0199 20 TELESCOPIC FLAGPOLE - Adjustable telescopic flagpole in adonized aluminium (maxi height: 8 m) - Delivered with counterweight system and feet autocal in lacquered steel - Maxi length for the bracket: 1,20 m CODE PRICE G-0201 65 PICHON MODEL TANKER 18500 L WITH DRIBBLE BAR PICHON MODEL MUCK SPREADER M20 NEW PICHON MODEL SLURRY MIXER B4 NEW - Designed by ROS - Scale 1/32 - From 14 years old - Designed by ROS - Scale 1/32 - From 14 years old - Designed by ROS - Scale 1/32 - From 14 years old CODE PRICE G-0236 54,35 CODE PRICE G-0243 41,81 CODE PRICE G-0244 20,90 TERMS AND CONDITIONS: Prices and rates dated 05th August 2013. Offer valid while stocks last. All prices are in Euros and can be modified without any prior notice. VAT and shipping costs are excluded. Dealers discounts only possible for the packs: key-rings (50 ex.), caps (50 ex.), models of tankers or spreaders (6 ex.) and models of slurry mixers (18 ex.). Pictures are not contractual. 5

INFORMATIONS HOW TO PREPARE A QUOTATION? FIND THIS DOCUMENT ON THE NEXT PAGE PAGE 13: Choosing a tank ZI de Lavallot - BP 21 - F-29490 GUIPAVAS Tel. +33 (0)2 98 34 41 00 - Fax +33 (0)2 98 34 41 20 RCS Brest B 348924994 - N VAT: FR 76 348 924 994 info@pichonindustries.com - www.pichonindustries.com SA with 1 583 334 Euros capital Salesman: Date: Delay of delivery: Address of delivery Mode of payment Customer code Customer address Number All sales are conducted under our general conditions of sales. Copy available on request. In case of contest, the Commercial Court of Brest is the unique to have juridiction. All sales are conducted with property provision untill full payment has been received. Code Qty Description Price euro / unit Total price euro 2816770 1 SLURRY TANKER TCI 1 1 3 5 0 Litres 1 Axle(s) 8 358 8 358 Tanker recessed tank 2800200 1 Rear door Ø 950-1 flanged outlet Ø 150 420 420 281678 1 Pipe hooks pipe rack underneath tank 435 435 Bracket for mudguards 283192 1 Mudguards 557 557 500017 1 Light 174 174 Blank opening Ø 2816450 1 Sight tube 427 427 Sight glass Bracket for hydraulic internal mixer Hydraulic internal mixer QUOTATION (30 days validity) ORDER 2880070 1 Drawbar 1 634 1 634 500549 1 Hitch: bolted ring hitch 307 307 Hitch height: 280263 1 Hydraulic cable storage frame 174 174 3200650 1 Jack / foot hydraulic 708 708 1801310 1 Vacuum pump 11000 l/mn with oil tank 2 177 2 177 2702140 1 PICHON oil with support 2 L 29 29 281648 1 Double overfill security Ø 76 972 972 2201090 1 PTO shaft Wide angle P.T.O. shaft type 6 yoke 1 3/8 640 640 PAGE 14: Choosing a door 2604770 2 Wheels 30,5 R 32 AS 12 PR Prostor 3 010 x 2 6 020 2609120 1 Single Axle Bogie Steering Forced steering Tandem Tri-axle 2 520 2 520 150/10-2150 - 420x180 1902950 1 Hydraulic rear valve Ø 150 industrial 669 669 2800860 1 Valve coupling Ø 150 68 68 Manual valve(s) Ø Valve coupling Ø TOTAL 1 26 289 PAGE 19: Choosing pumps PAGE 25: Choosing wheels PAGE 30: Choosing axles PAGE 34: Choosing a valve 6

INFORMATIONS This is an example of quotation. Each component is specified. Fill in the following double page to build the machine according to your customer requirements. Code Qty Description Price euro / unit Total price euro TOTAL 1 26 289 282295 1 Bracket for BP2 autofiller Ø 200 290 290 2823140 1 BP2 autofiller Ø 200 4 384 4 384 2821210 1 Reception cone Ø 200 728 728 2401130 1 Suction pipe Ø 200 3m flexible 382 382 2403030 1 Suction pipe Ø 200 3m galvanized 181 181 2800550 1 Spreader plate low level spreader plate Ø 150 191 191 700350 1 Bracket for hydraulic linkage 635 635 3608500 1 Hydraulic linkage 2 392 2 392 3612050 1 Spreading device (Bar - Injector) EL61 15 932 15 932 Injector - Folding - 11 tines - Macerator 320541 1 Hydraulic distribution with electric control 4 functions 2 993 2 993 Function 1: Function 2: Function 3: Function 4: Function 5: Function 6: Function 7: Function 8: PAGE 36: Choosing autofillers Electric switch (diverter) Electric connection(s) Equipment - Accessories (aditionals) Precise number of tractors: TOTAL 54 397 PAGE 34: Choosing filling systems NET TRANSPORT VAT Salesman: SIGNATURES The customer: TOTAL TOTAL TO PAY PAGE 44: Choosing a hydraulic control system PAGE 42: Choosing injectors PAGE 38: Choosing speader plates 7

DEVIS (valable 30 jours) Adresse livraison COMMANDE Coordonnées client ZI de Lavallot - BP 21-29490 GUIPAVAS Tél. 02 98 344 100 - Fax 02 98 344 120 www.pichonindustries.com - info@pichonindustries.com RCS Brest B 348924994 - N TVA : FR 76 348 924 994 SA au capital de 1 583 334 Euros Inspecteur : Mode de paiement Code client N commande Date : Délai livraison : Toutes nos ventes sont conclues aux conditions générales rappelées au verso. En cas de litige, le Tribunal de Commerce de BREST est seul compétent. Toutes les ventes sont conclues sous réserve de propriété jusqu à leur complet paiement. Code Qté Désignation Prix Unitaire HT Prix Total HT TONNE A LISIER TCI Litres Essieu(x) Cuve Porte Ø Supports tuyaux Prédisposition garde boue Garde boue Eclairage Ouverture sur cuve Ø Indicateur de niveau tubulaire Voyant de niveau Prédisposition mélangeur intérieur hydraulique Mélangeur intérieur hydraulique Flèche Anneau Hauteur attelage : Potence support flexibles Béquille Pompe - Compresseur Huile PICHON avec support bidon Double sécurité de remplissage Ø Transmission Roues Essieu Boggie Suiveur Suiveur forcé Tandem Tridem Freinage Vanne arrière hydraulique Ø Sortie de vanne bride griffe Ø Vanne (s) manuelle Ø Sortie de vanne bride griffe Ø TOTAL 1

Code Qté Désignation Prix Unitaire HT Prix Total HT RAPPEL TOTAL 1 Prédisposition bras de pompage Ø Bras de pompage Ø Cône Ø Tuyau(x) de pompage Ø Tuyau(x) de pompage Ø Buse(s) épandage Prédisposition relevage Relevage Outils d'épandage (Rampe - Enfouisseur) Distribution hydraulique Fonction 1 : Fonction 2 : Fonction 3 : Fonction 4 : Fonction 5 : Fonction 6 : Fonction 7 : Fonction 8 : Sélecteur électrique (déviateur) Connexion(s) électrique(s) Options Préciser le nombre d'utilisateurs pour cette Tonne : TOTAL REPRISE(S) : PORT HT (NET) TVA SIGNATURES Inspecteur : Le client : Prix HT TVA TTC REPRISE TTC TTC NET À PAYER

ZI de Lavallot - BP 21 - F-29490 GUIPAVAS Tel. +33 (0)2 98 34 41 00 - Fax +33 (0)2 98 34 41 20 RCS Brest B 348924994 - N VAT: FR 76 348 924 994 info@pichonindustries.com - www.pichonindustries.com SA with 1 583 334 Euros capital QUOTATION Address of delivery (30 days validity) ORDER Customer address Salesman: Mode of payment Customer code Number Date: Delay of delivery: All sales are conducted under our general conditions of sales. Copy available on request. In case of contest, the Commercial Court of Brest is the unique to have juridiction. All sales are conducted with property provision untill full payment has been received. Code Qty Description Price euro / unit Total price euro TOTAL Salesman: SIGNATURES The customer: TRANSPORT NET VAT TOTAL TOTAL TO PAY

TANKS ALL TANK CAPACITIES ARE GUARANTEED BY THE MANUFACTURER. TCI 1 AXLE TANKS Code Description ØTank Tank thickness Chassis thickness Tank length 2841030 3050 L (670 Gal.) Tank 1 100 5 mm 8 mm 3,19 m 1 259 2841040 4050 L (890 Gal.) Tank 1 250 5 mm 8 mm 3,20 m 1 560 2841010 5150 L (1130 Gal.) Tank 1 400 5 mm 8 mm 3,35 m 2 073 2841070 6050 L (1330 Gal.) Tank 1 400 5 mm 8 mm 3,95 m 2 710 500021 2600 L (570 Gal.) Tank Viti 1 250 5 mm 8 mm 2,20 m 1 073 500022 3050 L (670 Gal.) Tank Viti 1 250 5 mm 8 mm 2,50 m 1 385 500023 4050 L (890 Gal.) Tank Viti 1 250 5 mm 8 mm 3,20 m 1 717 Price Bracket double overfill security Ø60 Full opening Tank length Tanks < 6050 L : no baffle plate 6050 L tank: 1 baffle plate Ø Basic options: see next pages Basic tank - Tank conforms to DESP 97/23/CE - Integrated chassis - Internal and external hot dipped galvanised - Steel quality S235JRG2 class 1 Code Description ØTank Tank thickness Chassis thickness Tank length 2802450 7150 L (1570 Gal.) Tank Ø1 500 6 mm 8 mm 4,35 m 3 442 2802520 8100 L (1780 Gal.) Tank Ø1 500 6 mm 8 mm 4,90 m 4 755 500418 8100 L (1780 Gal.) Recessed tank Ø1 500 6 mm 8 mm 5,00 m 5 465 2802530 10400 L (2280 Gal.) Tank Ø1 600 6 mm 10 mm 5,60 m 6 450 2802590 10400 L (2280 Gal.) Recessed tank Ø1 600 6 mm 10 mm 5,75 m 7 642 500424 10400 L (2280 Gal.) Recessed tank Ø1 700 7 mm 12 mm 5,20 m 8 101 2801850 11350 L (2490 Gal.) Tank Ø1 700 7 mm 12 mm 5,70 m 7 038 2816770 11350 L (2490 Gal.) Recessed tank Ø1 700 7 mm 12 mm 5,70 m / 5,80 m 8 358 500425 11350 L (2490 Gal.) Recessed tank Ø1 800 8 mm 12 mm 4,90 m 8 798 Price Bracket double overfill security Ø76 Bracket double overfill security Ø76-100 Ø Basic options: see next pages Ø950 Basic tank Tank length - Tank conforms to DESP 97/23/CE - Integrated chassis - Internal and external hot dipped galvanised - Steel quality S235JRG2 class 1 7150 & 8500 L tanks: 1 baffle plate 10400 to 11350 L tanks: 2 baffle plates 281686 Additional baffle plate each: 209 2701040 Epoxy painting inside the tank (2 coats) 3 years warranty (excluding shock damages) Tank 5000 L : 0,65 x capacity L Tank from 6000 L to 10000 L : 0,55 x capacity L Tank 11000 L : 0,45 x capacity L 2701080 Painting onto galvanized tanker and drawbar Contact us 12

TANKS TCI 2 AXLES TANKS Code Description ØTank Tank thickness TCI 3 AXLES TANKS Chassis thickness Tank length 2802510 7150 L (1570 Gal.) Tank Ø1 500 6 mm 8 mm 4,35 m 3 760 2802520 8100 L (1780 Gal.) Tank Ø1 500 6 mm 8 mm 4,90 m 4 755 2802530 10400 L (2280 Gal.) Tank Ø1 600 6 mm 10 mm 5,60 m 6 450 2801850 11350 L (2490 Gal.) Tank Ø1 700 7 mm 12 mm 5,70 m 7 038 2802540 12600 L (2770 Gal.) Tank Ø1 700 7 mm 12 mm 6,00 m 7 253 500421 12600 L (2770 Gal.) Recessed tank Ø1 700 7 mm 12 mm 6,20 m 9 011 2802620 14200 L (3120 Gal.) Tank Ø1 800 8 mm 14 mm 6,04 m 10 581 500422 14200 L (3120 Gal.) Recessed tank Ø1 800 8 mm 14 mm 6,15 m 12 338 2802550 15700 L (3450 Gal.) Tank Ø1 800 8 mm 14 mm 6,63 m 11 607 500432 15700 L (3450 Gal.) Tank Ø1 900 8 mm 14 mm 6,05 m 11 607 500423 15700 L (3450 Gal.) Recessed tank Ø1 800 8 mm 14 mm 7,15 m 13 362 500064 16800 L (3690 Gal.) Tank Ø1 900 8 mm 14 mm 6,40 m 14 251 500055 16800 L (3690 Gal.) Recessed tank Ø1 900 8 mm 14 mm Contact us 16 879 2802560 18500 L (4070 Gal.) Tank Ø1 900 8 mm 14 mm 6,95 m 15 725 500426 18500 L (4070 Gal.) Recessed tank Ø1 900 8 mm 14 mm Contact us 18 005 500063 18500 L (4070 Gal.) Recessed tank Ø2 000 8 mm 14 mm Contact us 18 679 2803200 20700 L (4550 Gal.) Tank Ø2 000 8 mm 14 mm 6,99 m 19 934 500450 20700 L (4550 Gal.) Recessed tank Ø2 000 8 mm 14 mm Contact us 21 795 500062 20700 L (4550 Gal.) Recessed tank Ø2 100 8 mm 14 mm Contact us 22 568 500051 22700 L (4550 Gal.) Recessed tank Ø2 100 8 mm 14 mm Contact us 25 485 - Tank conforms to DESP 97/23/CE - Integrated chassis - Internal and external hot dipped galvanised - Steel quality S235JRG2 class 1 Bracket double overfill security Ø76 Ø950 7150 & 8100 L tanks: 1 baffle plate From 10400 to 14200 L tanks: 2 baffle plates From 15700 to 22700 L tanks: 3 baffle plates Code Description ØTank Tank thickness Chassis thickness Tank length 2802570 18500 L (4070 Gal.) Tank Ø1 900 8 mm 14 mm 6,98 m 20 708 2802580 20700 L (4550 Gal.) Tank Ø2 000 8 mm 14 mm 7,00 m 22 365 2802640 22700 L (4990 Gal.) Tank Ø2 000 8 mm 14 mm 7,75 m 24 022 500256 22700 L (5000 Gal.) Recessed tank Contact us 8 mm 14 mm Contact us 25 953 500061 24500 L (5380 Gal.) Tank Ø2 100 8 mm 14 mm 7,75 m 25 994 500119 24500 L (5380 Gal.) Recessed tank Ø2 000 8 mm 14 mm Contact us 27 825 500116 27400 L (6020 Gal.) Tank Ø2 200 8 mm 14 mm 7,68 m 27 510 500118 30000 L (6600 Gal.) Tank Ø2 300 8 mm 14 mm 7,68 m 29 138 Bracket double overfill security Ø100 Bracket double overfill security Ø76-100 Tank length Ø Basic options: see next pages Price Basic options: see next pages Basic tank Maximum load per axle can differ by countries. Users have to refer to local regulations. Price Ø950 Tank length From 18500 to 30000 L tanks: 3 baffle plates Basic tank - Tank conforms to DESP 97/23/CE - Integrated chassis - Internal and external hot dipped galvanised - Steel quality S235JRG2 class 1 13

BASIC OPTIONS REAR DOORS 2842000 Rear door Ø1 135-1 Flanged Outlet Ø150 for TCI 3050 L 558 2842130 Rear door Ø1 135-2 Flanged Outlets Ø150 for TCI 3050 L 640 2842100 Rear door Ø1 285-1 Flanged Outlet Ø150 for TCI 4050 L 661 2842090 Rear door Ø1 285-2 Flanged Outlets Ø150 for TCI 4050 L 741 2842110 Rear door Ø1 430-1 Flanged Outlet Ø150 for TCI 5150 & 6050 L 697 2842120 Rear door Ø1 430-2 Flanged Outlets Ø150 for TCI 5150 & 6050 L 778 Rear door 1 flanged outlet Rear door 2 flanged outlets 2800200 Rear door Ø950-1 Flanged Outlet Ø150 from TCI 7150 L 420 2800500 Rear door Ø950-1 Flanged Outlet Ø200 from TCI 7150 L 453 2800210 Rear door Ø950-1 Flanged Outlet Ø250 from TCI 7150 L 520 2816890 Rear door Ø950-2 Flanged Outlets Ø150 from TCI 7150 L 501 2800460 Rear door Ø950-2 Flanged Outlets Ø200 from TCI 7150 L 566 2800920 Rear door Ø950-2 Flanged Outlets 1x Ø150 & 1 x Ø200 from TCI 7150 L 566 2814550 Rear door Ø950 for flowmeter 883 Rear door Ø950 recessed tank for electronic flowmeter PIPE HOOKS 2801060 Pipe hook Ø150 each = 24 2801050 Pipe hook Ø200 each = 26 2801070 Double horizontal pipe hook Ø150 each = 38 2818380 Double horizontal pipe hook Ø200 each = 43 500613 3 double pipe hook kit Ø150 (end stop included) 145 500614 3 double pipe hook kit Ø200 (end stop included) 166 IMPORTANT: Double horizontal pipe hook with horizontal end stops are recomended for: - TCI till 8100 L (without mudguards) + BP2 + wheels Ø>1400 mm - TCI from 10400 L (without mudguards) + BP2 + wheels Ø>1600 mm 500047 Double pipe hook kit for recessed twin axle tanker per side: 231 281678 Piperack underneath tanker placed on the right hand side: - for TCI single axle: from TCI 10400 L - for TCI twin axle: from TCI 15700 L GET ADVICE FOR OTHER SIZES 435 IMPORTANT: Piperack underneath tanker is not compatible with all options (tandem, tri axle...) Pipe hook Ø150 - Ø200 Double pipe hook kit for recessed twin axle tanker Double horizontal pipe hook Ø150 - Ø200 Piperack underneath tanker 14

BASIC OPTIONS MUDGUARDS 283471 Mudguard brackets for non recessed single axle tanker 58 283474 Mudguard for single axle tanker (brackets not included) per pair: 873 283472 Mudguard brackets for non recessed twin axle tanker 86 283475 Mudguards for non recessed twin axle tanker from 8100 L to per pair: 943 11350 L with pipe hooks (brackets not included) 283476 Mudguards for non recessed twin axle tanker from 12600 L to 20700 L with pipe hooks (brackets not included) per pair: 1 008 283473 Mudguard brackets for non recessed tri axle tanker 116 283477 Mudguards for non recessed tri axle with pipe hooks per pair: 1 193 (brackets not included) 283192 Mudguards for recessed single axle tanker (brackets included) per pair: 557 283193 Mudguards for recessed twin axle tanker per pair: 670 (brackets included) 500162 Mudguards for recessed tri axle tanker per pair: 978 (brackets included) 500105 Hydraulic twist pipe rack/mudguard for twin axle tanker each : 3 785 PICHON PATENT - 1 D.A. HY ADVICE: Hydraulic distributor with electric control is necessary 500124 Front mudflaps per pair: 270 500125 Rear mudflaps per pair: 186 LIGHTS 500017 Standard road lights (on 7 pin plug 12 V) 174 500018 Truck road lights (on 7 pin plug 12 V) 245 2816240 High level road light bar (with truck road lights) 1 support of flashing beacon included Not available with raingun nor turret autofiller 352 700105 Working lights (on 3 pin plug 12 V) Switch on control box: see p. 45 per pair: 128 500161 Bracket for flashing beacon 78 700103 Flashing beacon (on 7 pin plug 12 V) (bracket not included) 49 Switch on control box: see p. 45 2301290 Side lights (specify position) per pair: 129 ADVICE: Side lights compulsory in France when tanker width over 2.55m (one pair = 2 white lights at the front + 2 red lights at the rear of the tanker) Standard light Truck road lights High level road light bar (with truck road lights) Working lights Flashing beacon 15

BASIC OPTIONS FILLING POINTS - TOP FILL 4701530 Flanged filling point Ø100 (specify position) 66 282267 Flanged filling point Ø150 (specify position) 83 282268 Flanged filling point Ø200 (specify position) 114 2801080 Top filling point Ø150 with 90 elbow + 1 cap 218 500120 Vertical top filling point Ø150 + 1 cap 200 280330 Manual top fill Ø300 (without ladder) 451 280333 Manual top fill Ø400 (without ladder) 523 280332 Manual top fill Ø600 (without ladder) 853 280395 Hydraulic top fill Ø400 (without ladder) - 1 D.A. HY 1 482 2815080 Ladder for access to top fill (specify position) 359 500121 Internal ladder 502 280415 Bracket for top fill cone 346 280417 Top fill cone - 1 industrial hydraulic valve DN 250 and 1 hydraulic valve DN 150 (bracket not included) - 1 D.A. HY 2 308 Ladder for access to top fill Hydraulic top fill Ø400 Manual top fill Ø600 Top fill cone Top filling point Ø150 with 90 elbow + 1 cap INTERNAL HYDRAULIC MIXERS SIGHT TUBE - SIGHT GLASS 2816450 Sight tube Ø80 427 2825100 Protection cage for sight tube 117 500122 Sight tube for weight transfer system (1 sight tube + 1 sight glass 3 at the top front of the tanker) See drawing p.17 2806500 Level indicator with internal ball 427 1902130 3 sight glass (specify position) 82 280328 Bracket for hydraulic mixer 266 500123 Hydraulic mixer for TCI 6050 to 14200 L (bracket not included) - 1 D.A. HY 2 460 500138 Hydraulic mixer for TCI 15700 to 30000 L (bracket not included) - 1 D.A. HY 2 852 500237 Hydraulic mixer with screw 3 741 854 16

BASIC OPTIONS ACCESSORIES 1905410 Polyurethane tool box 440x400x480mm with 2 keys 277 (specify position) 1906130 Polyurethane tool box 1040x490x480mm with 2 keys 520 (specify position) 1905800 Notebook tube Ø125 73 1905530 25 L hand washing water tank with soap dispenser 217 (specify position) 1905010 Mileometer 287 2833350 Stone trap Ø335 + 1 cap Ø150 369 1902510 Watering-trough with level control device (specify position) 474 500103 Colour backward camera (7 " screen, camera and cabling) 541 500104 Backward alarm 129 280955 Rear tow hitch (Light socket included) 289 700204 Bracket for air vent valve 43 700113 Hydraulic air vent valve 213 (bracket not included) - 1 D.A. HY 2830750 Manual reel (epoxy paint onto steel) 2 926 for 20 m. pipe DN25 (1 water gun + 1 tap included) 2830760 Manual reel (epoxy paint onto steel) for 20 m. pipe DN32 (1 water gun + 1 tap included) 3 156 Tool box 440x400x480 Camera kit Manual reel (Washing only Max. pressure 1 bar) Notebook tube Hand washing tank Stone trap Ø335, cap Ø150 SLOPE GROUND KIT 281215 Emptying system for slope ground (PICHON hydraulic industrial valve Ø150 DA included) - 1 D.A. HY 1 450 Industrial Valve opened Industrial Valve closed Air flow Slurry flow Emptying system for tankers with rear door Ø950 Emptying system for tankers with full opening rear door WEIGHT TRANSFER SYSTEM 500024 Weight transfer by internal partition and automatic emptying 2 531 ADVICE: Don't forget the sight tube for internal weight transfer system p.16 Dimension of trap: 600x400mm Volume of front compartment: from 3500 to 4500 L depending on Øtanker 17

BASIC OPTIONS DRAWBARS WITH BOLTED HITCH ADVICE: Specify hitch height 2841060 Fixed drawbar for TCI 2600 to 4050 L 740 2841120 Sprung drawbar for TCI 2600 to 4050 L 1 035 2841080 Fixed drawbar for TCI 5150 to 6050 L 792 2841090 Sprung drawbar for TCI 5150 à 6050 L 1 150 500196 Tractor wheels protectors for TCI 2600 to 6050 L 260 DRAWBARS WITHOUT HITCH 2880040 Fixed drawbar for TCI 7150 to 10400 L 1 241 2880060 Sprung drawbar for TCI 7150 to 10400 L 1 361 2880070 Sprung drawbar for TCI 11350 to 16800 L 1 634 2880080 Sprung drawbar for TCI 18500 to 24500 L 1 951 500428 Sprung drawbar for TCI 27000 to 30000 L 2 600 700327 Hydraulic drawbar suspension for 4 290 TCI 11350 to 16800 L. 500456 Hydraulic drawbar suspension for TCI 18500 to 30000 L. 4 436 500126 Hydraulic slope kit for hydraulic drawbar 1 D.A. HY BOLTED HITCH ADVICE: options available from TCI 7000 L. ACCESSORIES - DRAWBAR FOOT 649 500549 Bolted ring hitch ISO 5692 307 500550 Bolted ball hitch Ø80. Tractor bracket not included. Get advice depending on tractor make and model. 827 190093 80 mm Øball adaptor to piton hitch 166 Drawbars with bolted hitch for TCI 2600 to 6050 L Drawbars for bolted hitch for TCI > 6050 L Bolted ring hitch Bolted ball hitch Hydraulic suspension with slope kit on drawbar ADVICE: Bolted ball hitch advised from TCI 15700 280263 Storage frame on drawbar for hydraulic hoses and electric cables Obligatory according to directive 95/63/CE 174 2815790 Protector kit for PTO shaft 320 (Storage frame included) 2804870 Manual jack for TCI up to 11350 L 366 3200650 Hydraulic jack (manual pump simple acting) 708 Required with forced steering axle 500597 Foldable hydraulic jack - 1 D.A. HY 1 416 700326 Drawbar foot 117 Protector kit for PTO shaft Manual jack Hydraulic jack (jack adjustment) Drawbar foot Foldable hydraulic jack 18

PUMPS AIR COOLED VACUUM PUMPS PN58 & PN84 PN106 with oil tank on the side PN106 avec réserve d'huile arrière MORO with oil tank on the side 1801130 Vacuum pump PN58 (air outflow 6500 L/mn) 540 RPM 1 325 1801220 Vacuum pump PN84 (air outflow 9000 L/mn) 540 RPM 1 427 1801120 Vacuum pump PN106 (air outflow 11000 L/mn) 540 RPM 1 826 with oil tank on the back of the pump 1801310 Vacuum pump PN106 (air outflow 11000 L/mn) 540 RPM 2 177 with automatic greasing and oil tank on side 1801320 Vacuum pump PN106 (air outflow 11000 L/mn) 1000 RPM 2 177 with automatic greasing and oil tank on side 1809090 Vacuum pump MORO (air outflow 11800 L/mn) 540 RPM 1 545 with automatic greasing and oil tank on side 1801380 Vacuum pump PN140 (air outflow 13800 L/mn) 540 RPM 2 640 with automatic greasing and oil tank on side 1801490 Vacuum pump PN140 (air outflow 13800 L/mn) 1000 RPM 2 640 with automatic greasing and oil tank on side 500607 Vacuum pump PN106 driven by hydraulic motor with oil tank on side (1 D.A. HY connected directly to tractor) Maximum oil flow: 80 L/min 4 073 500608 Vacuum pump PN140 driven by hydraulic motor with oil tank on side (1 D.A. HY connected directly to tractor) Maximum oil flow: 80 L/min 5 081 2702140 2L oil tank for vaccum pump vanes + bracket for oil tank 29 2702160 5L oil tank for vacuum pump vanes + bracket for oil tank 42 PN140 with oil tank on the side PN140 driven by hydraulic motor WATER COOLED VACUUM PUMPS ADVICE: water cooler requires 3 pins plug 12 V. 1802280 13800 L/min vacuum pump LC420-540 RPM Silencer/Oil saver/filter + Air filter 7 653 1802680 13800 L/min vacuum pump LC420-1000 RPM Silencer/Oil saver/filter + Air filter 7 653 1802080 15000 L/min vacuum pump PR 150-1000 RPM Silencer/Oil saver/filter + Air filter 10 880 500246 Vacuum lobe pump DL200 JUROP 20830 L/min - 1000 RPM - Silencer on air injection - Silencer on exhaust - Air filter - Overheat alarm - 4 ways valce - 120 mm Øpipes 6 118 LC 420 PR 150 DL200 V21 LIQUID RING VACUUM PUMPS 1806500 9000 L/mn liquid ring vacuum pump V12/KS500-1000 RPM (water reservoir inside the tank) 1806510 16660 L/min liquid ring vacuum pump V15/KS725-1000 RPM (water reservoir inside the tank) 1806520 20830 L/min liquid ring vacuum pump V21/KS1025-1000 RPM (water reservoir inside the tank) 14 191 16 054 18 420 19

PUMPS SIMPLIFIED HYDRAULIC DRIVE UNIT This unit requires a PN106 or PN140 vacuum pump (only 1000rpm) 500127 SIMPLIFIED HYDRAULIC DRIVE UNIT 1000RPM Hydraulic pump driven by PTO shaft Oil tank with filter, air filter and vacuum breaker valve Oil quantity delivered: 80 L Flector between the gear and the vacuum pump 3 431 2702170 60L extra oil for hydraulic drive unit HVB ISO46 202 320432 SRONGLY ADVISED: WATER COOLER ON HYDRAULIC DRIVE UNIT (ON 3PIN PLUG 12V) + THERMOSTATIC SENSOR 60 1 405 INDUSTRIAL HYDRAULIC DRIVE UNIT 1801330 11000 L/mn vacuum pump for industrial hydraulic unit 3 551 1801520 13800 L/mn vacuum pump for industrial hydraulic unit 4 278 320792 INDUSTRIAL HYDRAULIC DRIVE UNIT 540RPM Hydraulic pump driven by PTO shaft Vacuum pump driven by hydraulic motor Oil tank with filter, air filter and vacuum breaker valve Oil quantity delivered: 120 L 5 516 320793 INDUSTRIAL HYDRAULIC DRIVE UNIT 1000RPM 5 516 320754 Rotation speed adjuster for vacuum pump. Potentiometer supply on 3 pin plug 12V 320432 STRONGLY ADVISED: WATER COOLER ON HYDRAULIC DRIVE UNIT (ON 3PIN PLUG 12V) + THERMOSTATIC SENSOR 60 1 582 1 405 2702170 60L extra oil for hydraulic drive unit HVB ISO46 202 IMPORTANT : No warranty given for other vacuum pumps DETAILED VIEW OF AN INDUSTRIAL HYDRAULIC DRIVE UNIT: LEGEND: Multiplier gear box Double hydraulic pump Hydraulic motorcompressor Oil tank 120 L Cooler Filter 20

PUMPS OVERFILL SECURITIES SECURITIES Ø60-6500 L/MN VACUUM PUMP 2843000 Top security + front security Ø60 Includes 1 DESP pressure valve and 1 vacuum gauge Ø70 SECURITIES Ø76-9000-11000 L/MN VACUUM PUMP 500128 Top security + self emptying front security Ø76 SIMPLIFIED Includes 1 DESP pressure valve and 1 vacuum gauge Ø70 PICHON pressure adjustment valve not included NECESSARY WITH A RAIN GUN 281648 Double front self emptying securities Ø76 - DESP Valve PICHON pressure adjustment valve, Vacuum gauge Ø110 SECURITIES Ø100 - FROM 13800 L/MN VACUUM PUMP 281647 Double front self emptying securities Ø100 - DESP Valve PICHON pressure adjustment valve, Vacuum gauge Ø110 500195 Top security + self emptying front security Ø100 DESP Valve, Vacuum gauge Ø110 PICHON pressure adjustment valve STRONGLY ADVISED for thick slurry, with straw and stones... MUST FIT: rain gun, weight transfer system, PR150 pump, liquid ring vacuum and power jetting tank OPTIONS 400 584 972 1 180 1 180 500185 PICHON pressure adjustment valve on Ø76 SIMPLIFIED securities 274 500049 High air suction for vacuum pump on securities Ø76/100 268 2817860 Filter / Oil collector / Silencer on securities Ø76/100 543 (High air suction included) 1902430 Fill counter (PICHON patent) 383 700325 Hydraulic vacuum pump change over - 1 D.A. HY 449 500048 10 Manual vacuum pump change over (95/63CE directive) 179 Ø76/100 10 P.T.O. S HAFT Code Description Power at 540 RPM 2201130 5 series P.T.O. shaft 6 splines 1 3/8 47 HP 170 2201140 5 series P.T.O. shaft 6 splines + friction clutch 1 3/8 47 HP 280 2201160 5 series P.T.O. shaft 6 splines + ratchet clutch 1 3/8 47 HP 230 2201090 6 series Wide angle P.T.O. shaft 6 splines 1 3/8 64 HP 640 2201030 6 series Wide angle P.T.O. shaft 6 splines + friction clutch 1 3/8 64 HP 670 2201050 6 series Wide angle P.T.O. shaft 6 splines + ratchet clutch 1 3/8 64 HP 660 2201180 6 series Wide angle P.T.O. shaft 6 splines + ratchet clutch 1 3/8 64 HP 830 2201240 6 series Wide angle P.T.O. shaft 20 splines 64 HP 690 2201190 6 series Wide angle P.T.O. shaft 21 splines 64 HP 690 Half shaft not available. Don t forget to check number of splines on tractor. Price 21

PUMPS DOUBLE PUMP - RAIN GUN THE DOUBLE PUMP SYTEM FOR RAIN GUN INCLUDES: - a gear box to drive individually the vacuum pump or the centrifugal pump - centrifugal pump outflow: 3500 L/mn at 5 bars - hydraulic rotation of rain gun and inside suction pipe to suck from the rear bottom of the tanker + rear stone trap - 1 D.A. HY (the fill counter with autofiller and double pump system is not possible) IMPORTANT: 6 SERIES WIDE ANGLE P.T.O. SHAFT IS STRONGLY ADVISED 1808410 Double pump with 6500 L/min vacuum pump 540 rpm + centrifugal pump 6 833 1801030 Double pump with 9000 L/min vacuum pump 540 rpm + centrifugal pump 6 877 1808370 Double pump with 11000 L/min vacuum pump* 540 rpm + centrifugal pump 7 600 1803670 Double pump with 13800 L/min vacuum pump* 540 rpm + centrifugal pump 7 748 1807650 Double pump with 13800L/min water cooled 12 701 vacuum pump LC420 540rpm + centrifugal pump 283114 Up & Down hydraulic function of rain gun - 1 D.A. HY 769 1904400 Fire equipment for rain gun (20 m pipe DN 45 + 1/2 symetrical coupling DN45 + 1 water gun + 1 tap) 522 * with automatic greasing and oil tank on side LOBE PUMP 500042 VL 20 Lobe pump (1800 L/mn at 5 bars) 540 rpm 6 795 Manual control of the 3 way valves 500041 Hydraulic control of the 3 way valves 759 IMPORTANT: Necessary with autofiller 283123 Rain gun with hydraulic rotation (one 3 way valve included) 1 069 283114 Up & Down hydraulic functuion of rain gun 769 ADVICE: Lobe pump comes with: - 1 manual top fill Ø300 (no pressure) - overfill air vent above the tanker - two 3 way valves + tubular connections - internal tubular connections with rear stone trap IMPORTANT: 6 series Wide angle P.T.O. shaft is strongly advised DO NOT USE BP2 OR PLUNGER ARM WITH A LOBE PUMP 22

CENTRIFUGAL PUMP: FLOWMASTER FLOWMASTER ADVICE: Flowmaster only available from TCI 15700 L 500618 FLOWMASTER SYSTEM COMES WITH: - Turret arm Ø200 with double articulation - 4 D.A. HY - Filling and spreading by the centrifugal pump of the filling arm (10 m 3 /min) - Centrifugal pump is driven by a 100 cm 3 hydraulic motor - Pump hydraulically locked in a reception box - Centrifugal pump (driven by PTO shaft) comes with: - Hydraulic pump on the multiplying box - 200 L tank / Filter / Cooler - Filling valve of tanker synchronized with draining and mixing pit valve - 1 D.A. HY - Hydraulic draining valve Ø250-1 D.A. HY - Rear hydraulic draining valve Ø150-1 D.A. HY - Mixing pit valve - 1 D.A. HY - Circuit of automatic return in the pit - Manual Opening Ø600 in lieu of rear door Ø950 - Internal and external access ladder 49 700 NOUVEAUTÉ DO NOT FORGET : Hydraulic slope kit + hydraulic drawbar suspension (p.18) 500607 Vacuum pump PN106 driven by hydraulic motor with oil tank on the side - 1 D.A. HY 4 073 500608 Vacuum pump PN140 driven by hydraulic motor with oil tank on the side - 1 D.A. HY 5 081 DO NOT FORGET: Double overfill securities Ø100 (p.21) 500433 Equipment for filling through reception cone (cone not included) - DO NOT FORGET THE CONE P.35 973 ONE PUMP: 4 FUNCTIONS, UNEQUALED PERFORMANCE 1. PIT STIRRING 2. TANK FILLING 3. INTERNAL MIXING 4. SPREADING 23

PICHON TANKERS PRICE LIST N 37: WHEELS (UDAPTE MAY 2014) WHEELS (PRICE PER UNIT) ADVICE: NON SUPPLY OF WHEELS RESULTS IN NO WARRANTY ON THE RUNNING GEAR AND AN ADDITIONAL COST OF 220 EUROS PER PAIR OF WHEELS. Code Description / Tyre make Load index Wheel Studs Rim offset Ø Width Inflating pressure (bar) Max.weight/ wheel (kg) at 25 km/h at 40 km/h Price (euro) 2604140 12,5/80-15,3 TL 14 PR (1) new 6 0 890 290 5,9 3390 2540 224 2604480 385/65 R 22,5 (15 R 22,5) remould 6 0 1092 408 8,0 5000 4500 296 2604000 385/65 R 22,5 (15 R 22,5) remould 8 0 1092 408 8,0 5000 4500 296 2604470 425/65 R 22,5 (16,5 R 22,5) remould 8 0 1127 422 8,0 5200 5000 570 2604800 425/65 R 22,5 (16,5 R 22,5) remould 10 0 1127 422 8,0 5200 5000 570 2604350 445/65 R 22,5 (18 R 22,5) remould 8 0 1158 453 8,0 5200 5000 670 2604300 445/65 R 22,5 (18 R 22,5) remould 10 0 1158 453 8,0 5200 5000 670 2604510 445/65 R 22,5 (18 R 22,5) new 169J 10 0 1150 444 8,5 5600 5400 980 2604380 21,3 R 24 150B 8 0 1400 540 2,6 4500 4300 1 210 2604310 21,3 R 24 150B 10 0 1400 540 2,6 4500 4300 1 210 2604550 23,1 R 26 153A8 10 0 1600 587 3.2 5500 5000 1 650 2612500 620/75 R 26 Alliance 360 167A8 10 0 1590 625 3,8 7260 6300 1 750 2604760 28,1 R 26 158B 10 0 1735 750 2,8 5880 5300 2 100 2604770 30,5 LR 32 172A8 10 0 1820 775 2,4 8700 7875 2 820 2609480 30,5 LR 32 Alliance 390 181B 10 0 1800 780 4,0 8320 7000 3 800 2604640 24 R 20,5 Michelin XS 176F 10 0 1374 602 4,0 8850 8195 3 315 2611030 550/60-22.5 16 PR (1) 8 0 1230 550 2.8 6485 5450 800 2611020 550/60-22.5 16 PR (1) 10 0 1230 550 2.8 6485 5450 800 2612870 560/60 R 22,5 Alliance 885 161D 10 0 1244 543 4,0 6485 5450 1 200 2612400 600/55 R 26,5 BKT FL630 Steel Belt 165D 10 N50 1333 611 4.0 8000 6700 1 850 2604590 600/55-26,5 Trelleborg 421 173A8 10 N50 1360 620 3,2 7735 6500 1 825 2612880 650/55 R 26,5 BKT FL630 Steel Belt 169D 10 N50 1389 645 4.0 8000 6700 2 050 2610670 650/65 R 26,5 Alliance 388 165D 10 N50 1520 654 2,8 8140 7000 2 310 2610700 650/65 R 26,5 Alliance 380 174D 10 N50 1518 664 4,0 9500 7900 2 520 2612800 710/50 R 26,5 BKT FL630 170D 10 N50 1383 687 4.0 8500 7150 2 110 2605410 650/55 B 30,5 Trelleborg 428 (2) 168D 10 N50 1490 640 3,6 8850 7615 2 200 2612890 600/60 R 30,5 Vredestein Flot Trac 169D 10 N50 1505 610 4,0 9150 7900 2 490 2612900 650/65 R 30,5 Vredestein Flot Trac 176D 10 N50 1635 645 4,0 11200 9650 2 820 2610590 750/60 R 30,5 Vredestein Flot Trac 181D 10 N50 1675 785 4,0 13050 11200 3 040 2610580 750/60 R 30,5 Alliance 390 HD 190D 10 N50 1685 770 4,0 13000 11000 3 930 (1) PR (strength index) is a strength code for tyre casing. (2) B : diagonal with steel belt Tyre pressure depends on weight and speed. It is STRONGLY ADVISED to get right pressure for best working conditions. 24

PICHON TANKERS PRICE LIST N 37: WHEELS (UDAPTE MAY 2014) SPEED INDEX Speed index A8 B D F J Speed (km/h) 40 50 65 80 100 SPEED INDEX SPECIFY BASIC FACE-VALUE SPEED QUOTED. LOAD INDEX Load index 150 153 158 161 165 166 167 168 Load (kg) 3350 3650 4250 4625 5150 5300 5450 5600 Load index 169 170 172 173 174 176 181 190 Load (kg) 5800 6000 6300 6500 6700 7100 8250 10600 LOAD INDEX SPECIFY MAXIMUM TYRE WEIGHT FOR BASIC FACE-VALUE SPEED QUOTED. RIM OFFSET 0 + 50-50 WHEEL PROFILES 12,5/80 x 15,3 385/65 R 22,5 425/65 R 22,5 445/65 R 22,5 21,3 R 24 AS 23,1 R 26 AS 28,1 R 26 AS 30,5 R 32 AS TRELLEBORG 421 TRELLEBORG 428 ALLIANCE 360 ALLIANCE 380 ALLIANCE 388 ALLIANCE 390 ALLIANCE 885 VREDESTEIN FLOTATION TRAC BKT FL630 MICHELIN XS 25

AXLES AXLES (WITHOUT WHEELS) 300X60 Code 350X60 400X80 /Studs- -Axle width Wheels Total width Price MODEL TCI VITICULTURAL 2600/3050/4050-1 axle - HYDRAULIC BRAKES 300x60 500568 70/6-1150 11,5/80x15,3 / 12,5/80x15,3 1,45 m / 1,47 m 713 MODEL TCI 3050-1 axle - HYDRAULIC BRAKES 300x60 2606740 70/6-1600 11,5/80x15,3 / 12,5/80x15,3 1,90 m / 1,92 m 723 2606740 70/6-1600 15x22,5 2,02 m 723 MODEL TCI 4050-1 axle - HYDRAULIC BRAKES 300x60 350x60 2606760 70/6-1700 12,5/80x15,3 / 15x22,5 2,02 m / 2,12 m 723-2606790 80/8-1800 15x22,5 / 550/60x22,5 2,22 m / 2,38 m - 1 035 2606780 80/8-1900 21,3 R 24 2,47 m - 1 035 MODEL TCI 5150-1 axle - HYDRAULIC BRAKES 300x60 350x60 2606760 70/6-1700 15x22,5 2,12 m 723-2606790 80/8-1800 15x22,5 2,22 m - 1 035 2606790 80/8-1800 16,5x22,5/18x22,5 2,27 m / 2,29 m - 1 035 2608820 80/8-1900 21,3 R 24 / 560/60x22,5 2,47 m / 2,50 m - 1 035 2606780 80/8-1900 550/60x22,5 2,48 m - 1 035 MODEL TCI 6050-1 axle - HYDRAULIC BRAKES 350x60 2606790 80/8-1800 15x22,5 2,22 m 1 035 2606790 80/8-1800 16,5x22,5/18x22,5 2,27 m / 2,29 m 1 035 2608820 80/8-1900 21,3 R 24 / 560/60x22,5 2,47 m / 2,50 m 1 035 2606780 80/8-1900 550/60x22,5 2,48 m 1 035 2608820 80/8-1900 580/65x22,5 2,49 m 1 035 MODEL TCI 7150-1 axle - HYDRAULIC BRAKES 350x60 400x80 2606790 80/8-1800 16,5x22,5 2,27 m 1 035-2606780 80/8-1900 18x22,5 / 550/60x22,5 2,39 m / 2,48 m 1 035-2607520 90/10-2000 560/60x22,5 2,60 m - 1 460 2607520 90/10-2000 21,3 R 24 / 580/65x22,5 2,57 m / 2,59 m - 1 460 2607520 90/10-2000 600/55x26,5 (-50) 2,70 m - 1 460 2607710 90/10-2100 23,1 R 26 2,72 m - 1 460 Number of Studs axle Axle width HALF-TANDEM AXLE MODEL TCI 5150/6050/7150/8100 500188 Half-tandem axle 90/8 - Axle width: from 1800 to 2000 2 290 26

AXLES AXLES (WITHOUT WHEELS) 400X80 Code 406x120 420x180 /Studs- -Axle width MODEL TCI 8100-1 axle - HYDRAULIC BRAKES Wheels Total width Price 400x80 406x120 2606860 90/10-1900 18x22,5 / 550/60x22,5 2,39 m / 2,48 m 1 460-2606890 90/10-2000 560/60x22,5 / 580/65x22,5 2,60 m / 2,59 m 1 460-2606890 90/10-2000 600/55x26,5 (-50) 2,70 m 1 460-2606890 90/10-2000 21,3 R 24 2,57 m 1 460-500158 2610430 130/10-2000 18x22,5 / 550/60x22,5 2,49 m / 2,58 m 1 916 2 355 500158 2610430 130/10-2000 600/55x26,5 (-50) 2,70 m 1 916 2 355 500159 2610440 130/10-2150 23,1 R 26 2,77 m 1 916 2 355 MODEL TCI 8100-1 axle - HYDRAULIC BRAKES + RECESS 406x120 2610430 130/10-2000 23,1 R 26 / 28,1 R 26 2,62 m / 2,78 m 2 355 MODEL TCI 10400-1 axle - HYDRAULIC BRAKES 400x80 406x120 420x180 500158 2610420 130/10-2000 18x22,5 / 550/60x22,5 2,49 m / 2,58 m 1 916 2 355-500158 2610400 130/10-2000 560/60x22,5 2,58 m 1 916 2 355-500158 2610400 130/10-2000 600/55x26,5 (-50) 2,70 m 1 916 2 355-500159 2610440 130/10-2150 23,1 R 26 / 600/60x30,5 (-50) 2,77 m / 2,85 m 1 916 2 355-2609120 150/10-2150 650/65x26,5 2,83 m - - 2 520 2609140 150/10-2150 650/65x30,5 (-50) 2,90 m - - 2 520 MODEL TCI 10400-1 axle - HYDRAULIC BRAKES + RECESS 420x180 2609070 150/10-2000 650/65x30,5 (-50) 2,75 m 2 520 2609070 150/10-2000 28,1 R 26 2,78 m 2 520 2609070 150/10-2000 850/50x30,5 (-50) 2,95 m 2 520 2609120 150/10-2150 30,5 R 32 2,95 m 2 520 MODEL TCI 11350-1 axle - HYDRAULIC BRAKES 420x180 2609250 150/10-2150 650/65x26,5 2,83 m 2 520 2609250 150/10-2150 600/60x30,5 (-50) 2,85 m 2 520 2609140 150/10-2150 650/65x30,5 (-50) 2,90 m 2 520 MODEL TCI 11350-1 axle - HYDRAULIC BRAKES + RECESS 420x180 2609120 150/10-2150 30,5 R 32 2,95 m 2 520 2608700 150/10-1900 30,5 R 32 2,70 m 2 520 2608700 150/10-1900 850/50x30,5 (-50) 2,85 m 2 520 2609070 150/10-2000 28,1 R 26 2,78 m 2 520 2609070 150/10-2000 710/55 R 34 2,75 m 2 520 EXAMPLE OF BRAKES 420X180 lining width: 180 mm drum diameter: 420 mm 27

AXLES BOGIE AXLE (WITHOUT WHEELS) Code Bogie /Studs-Axle Width- Wheel base (Er) Wheels Total width Price MODEL TCI 7150/8100 - HYDRAULIC BRAKES 350x60 2605520 Fixed + Fixed 80/8-1800 Er 1320 15x22,5/16,5x22,5 2,22/2,27 m 3 445 2605650 Fixed + Steering 80/8-2000 Er 1320 15x22,5/16,5x22,5 2,42/2,47 m 5 380 MODEL TCI 10400 - HYDRAULIC BRAKES 400X80 2605550 Fixed + Fixed 90/8-1900 Er 1320 15x22,5/16,5x22,5 2,32/2,37 m 4 090 2608810 Fixed + Steering 90/8-2100 Er 1450 15x22,5/16,5x22,5 2,52/2,57 m 6 030 2605560 Fixed + Fixed 90/10-2000 Er 1450 18x22,5 2,49 m 5 340 2605680 Fixed + Steering 90/10-2100 Er 1450 18x22,5 2,59 m 7 275 2605560 Fixed + Fixed 90/10-2000 Er 1450 550/60x22,5 2,58 m 5 340 2605680 Fixed + Steering 90/10-2100 Er 1450 550/60x22,5 2,68 m 7 275 2605680 Fixed + Steering 90/10-2100 Er 1450 580/65x22,5 2,68 m 7 275 2608720 Fixed + Forced steering 90/10-2100 Er 1450 Same dimensions as steering 90 9 430 MODEL TCI 11350/12600 WITHOUT INJECTOR - HYDRAULIC BRAKES 400x80 2605560 Fixed + Fixed 90/10-2000 Er 1450 18x22,5/550/60x22,5 2,49/2,55 m 5 340 2605680 Fixed + Steering 90/10-2100 Er 1450 18x22,5/550/60x22,5 2,59/2,68 m 7 275 2605680 Fixed + Steering 90/10-2100 Er 1450 560/60x22,5 2,70 m 7 275 2605680 Fixed + Steering 90/10-2100 Er 1450 580/65x22,5 2,70 m 7 275 2608720 Fixed + Forced steering 90/10-2100 Er 1450 Same dimensions as steering 90 9 430 MODEL TCI 12600/14200 - HYDRAULIC BRAKES 406x120 2610370 Fixed + Fixed 130/10-2000 Er 1450 18x22,5 / 550/60x22,5 2,49 m / 2,58 m 7 840 2610090 Fixed + Steering 130/10-2150 Er 1450 18x22,5 / 580/65x22,5 2,64 m / 2,77 m 8 450 500150 Fixed + Forced steering 130/10-2150 Er 1450 Same dimensions as steering 10 600 2610370 Fixed + Fixed 130/10-2000 Er 1450 600/55x26,5 (-50) 2,70 m 7 840 2610160 Fixed + Steering 130/10-2150 Er 1600 600/55x26,5 (-50) 2,85 m 9 590 2610370 Fixed + Fixed 130/10-2000 Er 1450 24 R 20,5 2,65 m 7 840 2610160 Fixed + Steering 130/10-2150 Er 1600 24 R 20,5 2,78 m 9 590 2610160 Fixed + Steering 130/10-2150 Er 1600 680/55x26,5 (-50) 2,93 m 9 590 2610200 Fixed + Steering 130/10-2150 Er 1700 650/65x26,5 2,83 m 9 590 2610240 Fixed + Forced steering 130/10-2150 Er 1700 Same dimensions as steering 11 780 ADVICE: With forced steering axle, wheel base «wb» 1600 of the steering axle is automatically changed to "wb" 1700. PICHON BOGIE FOR TCI 7150 TO TCI 14200 28

AXLES BOGIE AXLE (WITHOUT WHEELS) 406X120 Code Bogie /Studs-Axle Width- Wheel base (Er) 420X180 MODEL TCI 15700 - TCI 16800 WITHOUT INJECTOR - HYDRAULIC BRAKES Wheels Total width Price 406X120 420X180 500151 Fixed + Fixed 130/10-2000 Er 1360 18x22,5 2,49 m 8 140-500151 Fixed + Fixed 130/10-2000 Er 1360 550/60x22,5 2,58 m 8 140-500152 Fixed + Steering 130/10-2150 Er 1500 550/60x22,5 2,73 m 9 590-500152 Fixed + Steering 130/10-2150 Er 1500 580/65x22,5 2,77 m 9 590-500153 Fixed + Forced steering 130/10-2150 Er 1500 Same dimensions as steering 11 780 2610380 Fixed + Fixed 130/10-2000 Er 1500 600/55x26,5 (-50) 2,70 m 8 140-2609990 Fixed + Steering 130/10-2150 Er 1600 600/55x26,5 (-50) 2,85 m 9 590-2609990 Fixed + Steering 130/10-2150 Er 1600 24 R 20,5 2,78 m 9 590-2609990 Fixed + Steering 130/10-2150 Er 1600 680/55x26,5 (-50) 2,93 m 9 590-2609880 Fixed + Steering 130/10-2150 Er 1700 600/60x30,5 (-50) 2,85 m 9 590-2609880 Fixed + Steering 130/10-2150 Er 1700 650/65x26,5 2,83 m 9 590-2610050 Fixed + Forced steering 130/10-2150 Er 1700 Same dimensions as steering 11 780-500189 Fixed + Fixed 150/10-2150 Er 1500 24 R 20,5 2,78 m - 11 600 500072 Fixed + Steering 150/10-2150 Er 1600 24 R 20,5 2,78 m - 13 780 500072 Fixed + Steering 150/10-2150 Er 1600 680/55x26,5 (-50) 2,93 m - 13 780 500071 Fixed + Steering 150/10-2150 Er 1700 650/65x26,5 2,83 m - 13 780 500073 Fixed + Forced steering 150/10-2150 Er 1700 Same dimensions as steering - 17 330 MODEL TCI 16800/18500/20700 - HYDRAULIC BRAKES 420X180 500154 Fixed + Fixed 150/10-2150 Er 1500 24 R 20,5 2,78 m 13 000 500074 Fixed + Steering 150/10-2150 Er 1600 24 R 20,5 2,78 m 15 180 500074 Fixed + Steering 150/10-2150 Er 1600 600/55x26,5 (-50) 2,85 m 15 180 500074 Fixed + Steering 150/10-2150 Er 1600 680/55x26,5 (-50) 2,92 m 15 180 500075 Fixed + Steering 150/10-2150 Er 1700 650/65x26,5 2,83 m 15 180 500076 Fixed + Forced steering 150/10-2150 Er 1700 Same dimensions as steering 17 330 MODEL TCI 18500/20700 - HYDRAULIC BRAKES + RECESS 420X180 500077 Fixed + Steering 150/10-2150 Er 1820 750/60x30,5 (-50) 3,00 m 15 580 500077 Fixed + Steering 150/10-2150 Er 1820 710/55 R 34 2,90 m 15 580 500077 Fixed + Steering 150/10-2150 Er 1820 650/65x30,5 (-50) 2,90 m 15 580 500078 Fixed + Forced steering 150/10-2150 Er 1820 Same dimensions as steering 17 730 ADVICE : With forced steering axle, wheel base «wb» 1600 of the steering axle is automatically changed to "wb" 1700. Wheel base (Er) BOGIE FOR TCI 15700 AND TCI 16800 WITHOUT INJECTOR Studs Wheel base BOGIE FOR TCI 16800, TCI 18500 AND TCI 20700 29

AXLES TANDEM AXLE - LEAF SPRING SUSPENSION (WITHOUT WHEELS) Code Tandem /Studs-Axle Width- Wheel base (Er) 406X120 420X180 Wheels MODEL TCI 15700 - TCI 16800 WITHOUT INJECTOR - 2 axles - HYDRAULIC BRAKES Total width 406x120 Price 420x180 500155 Fixed + Fixed 130/10-2150 Er 1480 E 1000 24 R 20,5 2,78 m 8 140-2609790 Fixed + Steering 130/10-2150 Er 1580 E 1000 24 R 20,5 2,78 m 9 590-2609790 Fixed + Steering 130/10-2150 Er 1580 E 1000 600/55x26,5 (-50) 2,85 m 9 590-2609790 Fixed + Steering 130/10-2150 Er 1580 E 1000 680/55x26,5 (-50) 2,95 m 9 590-2609800 Fixed + Forced steering 130/10-2150 Er 1580 E 1000 Same dimensions as steering 11 780-2610310 Fixed + Steering 130/10-2150 Er 1690 E 1000 600/60x30,5 (-50) 2,85 m 9 590-2610310 Fixed + Steering 130/10-2150 Er 1690 E 1000 650/65x26,5 2,85 m 9 590-2610350 Fixed + Forced steering 130/10-2150 Er 1690 E 1000 Same dimensions as steering 11 780-500079 Fixed + Steering 150/10-2150 Er 1580 E 1000 Same dimensions as steering - 13 780 500081 Fixed + Forced steering 150/10-2150 Er 1580 E 1000 Same dimensions as steering - 15 930 500080 Fixed + Steering 150/10-2150 Er 1690 E 1000 Same dimensions as steering - 13 780 500082 Fixed + Forced steering 150/10-2150 Er 1690 E 1000 Same dimensions as steering - 15 930 MODEL TCI 16800/18500/20700-2 axles - HYDRAULIC BRAKES 420x180 500156 Fixed + Fixed 150/10-2150 Er 1480 E 1000 24 R 20,5 2,78 m 13 000 500083 Fixed + Steering 150/10-2150 Er 1610 E 1000 24 R 20,5 2,78 m 15 180 500083 Fixed + Steering 150/10-2150 Er 1610 E 1000 600/55x26,5 (-50) 2,85 m 15 180 500083 Fixed + Steering 150/10-2150 Er 1610 E 1000 680/55x26,5 (-50) 2,95 m 15 180 500084 Fixed + Forced steering 150/10-2150 Er 1610 E 1000 Same dimensions as steering 17 330 500085 Fixed + Steering 150/10-2150 Er 1710 E 1000 600/60x30,5 (-50) 2,85 m 15 180 500085 Fixed + Steering 150/10-2150 Er 1710 E 1000 650/65x26,5 2,85 m 15 180 500086 Fixed + Forced steering 150/10-2150 Er 1710 E 1000 Same dimensions as steering 17 330 MODEL TCI 16800/18500/20700/22700-2 axles - HYDRAULIC BRAKES + RECESS 420x180 2609490 Fixed + Steering 150/10-2150 Er 1820 E 800 710/55 R 34 2,89 m 15 580 2609490 Fixed + Steering 150/10-2150 Er 1820 E 800 750/60x30,5 (-50) 3,00 m 15 580 2609490 Fixed + Steering 150/10-2150 Er 1820 E 800 650/65x30,5 (-50) 2,95 m 15 580 2609500 Fixed + Forced steering 150/10-2150 Er 1820 E 800 Same dimensions as steering 17 730 2608580 Fixed + Steering 150/10-2200 Er 2000 E 800 30,5 R 32 3,00 m 15 580 2608590 Fixed + Forced steering 150/10-2200 Er 2000 E 800 Same dimensions as steering 17 730 GET ADVICE FOR DIFERENT WIDTH. Studs Wheel base (Er) Axle width Spring width (E) TANDEM AXLE LEAF SPRING SUSPENSION TCI 15700 TO TCI 22700 30

AXLES TRIDEM - LEAF SPRING SUSPENSION (WITHOUT WHEELS) Code Tandem /Studs-Axle Width- Wheels Wheel base (Er) 406X120 420X180 MODEL TCI 18500/20700-3 axles - HYDRAULIC BRAKES 2610410 Steering + Fixed + Steering 130/10-2150 Er 1480 E 1000 550/60x22,5 560/60x22,5 500566 Forced steering + Fixed + Forced steering MODEL TCI 22700/24500/27400/30000-3 axles - HYDRAULIC BRAKES Total width 2,70 m 2,75 m Price 406x120 15 565 130/10-2150 Er 1480 E 1000 Same dimensions as steering 20 525 420x180 500111 Steering + Fixed + Steering 150/10-2150 Er 1550 E 1000 600/55x26,5 (-50) 2,85 m 22 050 500111 Steering + Fixed + Steering 150/10-2150 Er 1550 E 1000 710/50x26,5 (-50) 2,95 m 22 050 500110 Forced steering + Fixed + Forced steering 150/10-2150 Er 1550 E 1000 Same dimensions as steering 26 600 500112 Steering + Fixed + Steering 150/10-2150 Er 1700 E 1000 650/65x26,5 2,95 m 22 150 500113 Forced steering + Fixed + Forced steering 150/10-2150 Er 1700 E 1000 Same dimensions as steering 26 600 MODEL TCI 24500/27400/30000-3 axles - HYDRAULIC BRAKES + RECESS 420x180 500108 Steering + Fixed + Steering 150/10-2200 Er 1820 E 700 750/60x30,5 (-50) 3,05 m 23 050 500109 Forced steering + 150/10-2200 Er 1820 E 700 750/60x30,5 (-50) 3,05 m 27 520 Fixed + Forced steering ADVICE: Before placing order, get advice from our engineers to confirm the tank design depending on the wheel choice. 40 40 KM/H ADDITIONAL KIT (FRENCH APPROVAL) Code Description PTAC Price 500263 Kit for TANDEM 40 KM/H 24 T 000 2 655 500264 Kit for TRIDEM 40 KM/H 32 T 000 3 040 ADVICE: Air brakes included in the 40 km/h kit. Characteristics - Suspensions : - Mechanical (multi-leaf springs) - Hydraulic (rams) - Air brakes 406x140 (414S) - Lever for automatic control - 30" air valves - Proportional brake (load sensing) to adjust stength - Screw parking brake - Configuration CODE with normal tyres : 2,55 m max. width - Configuration HORS CODE with wide tyres : 3 m max. width COMPATIBLE WHEELS 40 KM-H 24 R 20,5 560/60 R 22,5 580/65 R 22,5 600/55 R 26,5 650/55 R 26,5 650/60 R 26,5 680/55 R 26,5 710/50 R 26,5 600/60 R 30,5 800/45 R 30,5 Air brake (automatic adjust & 30" air valve) Screw parking brake ( JOST) Proportional air brake for mechanical suspension 31

AXLES: EXTRAS ADVICE: Before placing order, get advice from our engineers to confirm the tank design depending on the wheel choice. EXTRAS FOR HYDRAULIC SUSPENSION Running gear made of complete axles. Exists in two versions: passive or active. The active hydraulic suspension gives an unequalled comfort thanks to the energy output from the tractor load sensing. 500091 Passive hydraulic suspension on Tandem axle (only with a max wheel Øof 1650mm) 3 000 500092 Active hydraulic suspension on Tandem axle (only with a max wheel Øof 1650mm) 4 900 500094 Passive hydraulic suspension on Tri axle (only with a max wheel Øof 1520mm) 4 270 500095 Active hydraulic suspension on Tri axle (only with a max wheel Øof 1520mm) 6 170 IMPORTANT: LOAD SENDING FOR OIL ON DEMAND (INDEPENDANT FROM THE TRACTOR SPOOL VALVES) REQUIRED. 500054 Lifting axle kit for active hydraulic suspension on Tri axle 1 280 EXTRAS FOR DELTA HYDRAULIC SUSPENSION Inspired by the public works machinery, PICHON has designed the Delta suspension. Simple and heavy duty, it copes with all agricultural situations. This suspension fits medium and large size tankers working in difficult conditions. 500269 DELTA Passive hydraulic suspension 2 modules 3 000 500258 DELTA Active hydraulic suspension 2 modules 5 400 500270 DELTA Passive hydraulic suspension 3 modules 4 270 500259 DELTA Active hydraulic suspension 3 modules 6 670 IMPORTANT: LOAD SENDING FOR OIL ON DEMAND (INDEPENDANT FROM THE TRACTOR SPOOL VALVES) REQUIRED. 500054 Lifting axle kit for DELTA active hydraulic suspension on 3 modules 1 280 AUTOMATIC GREASING 500253 Automatic greasing on running gears (45 greasing points maximum) : - 1 electric pump 12VCC - 1 tank of grease 4.2 Kg - Integrated timer for greasing or non-greasing sequences - Control panel HP flex 6 900 ADVICE: Contact us to fit automatic greasing on other equipments. 32

AXLES: EXTRAS EXTRAS FOR BRAKES 2301600 Electric security of hydraulic braking 1 435 500238 Proportional brakes device depending tank capacity 790 (level indicator with internal ball not included) 500114 Air and hydraulic brakes on single axle 1 460 700129 Air and hydraulic brakes on Bogie/Tandem axle 1 800 700121 Air and hydraulic brakes on Tri axle 2 280 500115 Air brakes on single axle 790 700288 Air brakes on Bogie/Tandem axle 975 700123 Air brakes on Tri axle 1 160 500060 SIMPLE LINE on air brakes on single axle 790 500430 SIMPLE LINE on air brakes on Bogie/Tandem axle 975 500431 SIMPLE LINE on air brakes on Tri axle 1 160 Hydraulic braking security valve Air brakes on axle REAR STREERING AXLE Air and hydraulic brakes on axle 260550 2 nd aditional shock absorber ram on steering axle 218 ADVICE: - The steering axles 90 et 130 come with simple acting rams (SA distributor of the tractor) - The steering axles 150 come with double acting rams (DA distributor of the tractor or hydraulic function with electric control) FORCED STREERING AXLE 700167 Extra bracket to weld onto tractor if the tanker is used on several tractors 85 ADVICE: 1 extra bracket is necessary for a tri axle with forced steering 500260 Fitting on tractor 200 ADVICE: Hydraulic jack is required to adjust hydraulic circuit. Cylinder connection adjustable The ram anchor bracket is fitted horizontally with an offset distance of 150 mm 150 Hydraulic circuit for a forced streering axle THE FORCED STEERING AXLE is controled by the tractor via an on board hydraulic circuit which controls the axle movement via the front control ram to the rear axle ram. This forces the steering direction of the wheels in forward and backward direction and does not require any hydraulic connection to the tractor. 33

FILLING HYDRAULIC AND MANUAL VALVES 1903880 Manual valve Ø150 337 1905520 Manual valve Ø200 598 2801360 Quick attach system Ø150 for manual valve 265 2803380 Quick attach system Ø200 for manual valve 317 1903510 Hydraulic standard valve Ø150-1 S.A. HY 450 19030030 Hydraulic standard valve Ø200-1 S.A. HY 681 1902950 Hydraulic industrial guillotine valve Ø150 1 D.A. HY 669 1901760 Hydraulic industrial guillotine valve Ø200 1 D.A. HY 1 143 1904750 Hydraulic industrial guillotine valve Ø250 1 D.A. HY 1 709 1902970 Industrial valve with adjustable flow Ø150 1 D.A. HY 988 1906000 Industrial valve with adjustable flow Ø200 1 D.A. HY 1 304 2800860 Coupling Ø150 for hydraulic valve - DON T FORGET! 68 2800880 Coupling Ø200 for hydraulic valve - DON T FORGET! 158 500164 Coupling Ø250 for hydraulic valve - DON T FORGET! 213 700655 Turbo on hydraulic valve or manual valve Ø150-50 L/mn oil 2 446 outflow required -1 D.A. HY (valve and coupling: not included) 700656 Turbo on hydraulic valve or manual valve Ø200-50 L/mn oil 2 776 outflow required -1 D.A. HY (valve and coupling: not included) 2804110 Air bleed tap for fill point Ø150 (26x34) 58 2815870 Air bleed tap for fill point Ø200 (26x34) 87 2818880 Air bleed tap for fill point Ø150 (50x60) 73 IMPORTANT: ALWAYS SPECIFY THE POSITION OF VALVES ON THE TANKER SUCTION PIPES - ELBOWS 34 Flexible pipe Galvanized pipe Galvanized pipe with 45 welded welbow Flexible pipe + galvanized extension Galvanized pipe with filter 2401270 Flexible pipe Ø150-3 m complete 250 2401440 Flexible pipe Ø150-4 m complete 280 2401530 Flexible pipe Ø150-4 m + 1 m rigid 308 2401130 Flexible pipe Ø200-3 m complete 382 2401520 Flexible pipe Ø200-4 m complete 486 2403020 Galvanized tube Ø150-3 m 124 2403050 Galvanized tube Ø150-4 m 177 2403070 Galvanized tube Ø150-3 m with filter 253 2403250 Galvanized tube Ø150-3,50 m with 45 elbow 196 2403030 Galvanized tube Ø200-3 m 181 2403060 Galvanized tube Ø200-4 m 261 2403080 Galvanized tube Ø200-3 m with filter 333 2403220 Galvanized tube Ø200-3 m with 45 elbow 301 1903220 45 elbow - Ø150 102 1903290 45 elbow - Ø200 253 1903190 90 elbow - Ø150 117 1903300 90 elbow - Ø200 253 1903750 Reducer Ø150 to Ø100 85 1903820 Reducer Ø200 to Ø150 190 1903720 Reducer Ø150 to Ø200 190 1904040 Cap sphere Ø150 22 2820750 Cap sphere Ø200 82 POSSIBILITY TO HAVE DIFFERENT LENGTHS OF PIPES, PLEASE CONTACT US.

FILLING BI-DIRECTIONAL BP2 AUTOFILLER ADVICE: Suction pipes and reception cone are not included with autofiller 282293 Bracket for BP2 Ø150 (front bracket to hold the arm + Left/Right filling point) 2823200 BP2 Ø150-1 D.A. HY (bracket not included) 2823370 BP2 Ø150 + TURBO FILLER - 2 D.A. HY (bracket not included) 282295 Bracket for BP2 Ø200 (front bracket to hold the arm + Left/Right filling point) 2823140 BP2 Ø200-1 D.A. HY (bracket not included) 2823380 BP2 Ø200 + TURBO FILLER - 2 D.A. HY (bracket not included) 224 3 394 5 883 290 4 384 7 373 Bi-directional BP2 Ø150 Characteristics The user can switch whenever he wants the position of the arm (R/L hand side) BP2 designed with parallelogram to optimise filling through a reception cone The 3 hydraulic functions to operate the arm are all synchronised into one Air vent valve included to empty the suction pipe before raising the arm Pressure relief valve on hydraulic circuit to prevent crushing of the suction pipe while filling Turbo filler can be added to reduce filling time and optimize filling capacity Hydraulic industrial valve included Chains included to carry the reception cone Ø200 during transport Bi-directional BP2 Ø200 + TURBO FILLER EXTRAS FOR BI-DIRECTIONAL BP2 Automatic cone Ø150 Winch for cone Transport position 2821200 Galvanized reception cone Ø150-494 DO NOT FORGET 2821220 Automatic cone Ø150 1 010 (for above ground store 1 m maxi) 2821210 Galvanized reception cone Ø200-728 DO NOT FORGET 500594 Winch for cone 438 500131 Remote contral of BP2 operation (hyd. distribution is necessary) 134 SCRAPER AUTOFILLER 500434 Scraper underneath the tanker 15 000 - hydraulic up & down - 1 S.A. HY - hydraulic folding & width ajustement - 1 D.A. HY ADVICE WATER COOLED VACUUM PUMP IS NECESSARY. DON T FORGET TO ADD 1 HYDRAULIC VALVE Ø150 D.A. HY. 35

FILLING PLUNGER AUTOFILLER IMPORTANT: Specify pit depth (max 3,50 m.) 500411 Plunger Autofiller Ø200 RIGHT - 3 D.A. HY 7 825 500190 Plunger Autofiller Ø200 LEFT - 3 D.A. HY 8 366 Characteristics Available from TCI 10 400 L 1 hydraulic function to put down the first arm and put it back into transport position 1 hydraulic function for rotation of the second arm (140 angle) 1 hydraulic function for synchronisation of the vacuum pump change over and the hydraulic valve (air vent valve also synchronised) Heavy duty bearings => low maintenance Removable flexible pipe Ø200 on the second arm EXTRAS FOR PLUNGER MODEL 36 2832990 Immerged turbo filler (2 nd arm galvanized included). 50 L/min oil flow required - 1 D.A. HY 2 731 2834780 Turbo filler on articulation. 50 L/min oil flow required - 1 D.A. HY 2 731 700654 360 rotation of the second arm operated by a hydraulic motor 1 593 2821210 Galvanized reception cone Ø200 - DO NOT FORGET THE BRACKET FOR RECEPTION CONE 728 2805600 Bracket to hold reception cone on the tanker 59

FILLING TURRET AUTOFILLER IMPORTANT: Specify pit depth (max 3,50 m.) 500412 Turret arm Ø200 on RIGHT hand side with a double articulation - 4 D.A. HY 9 653 ADVICE: Anti-drops necessary if a dribble bar is put on the tanker See p.41 Characteristics Available from TCI 10 400 L Turret arm on the right hand side with an adjustable 270 rotation 2 hydraulic functions for the operation of the arm (2 separate rams) 1 hydraulic function for the rotation of the arm 1 hydraulic function for synchronisation of the vacuum pump changer over and the hydraulic valve at the top of the tanker (air vent valve is also synchronised) Swivelling joints and inside support column for the arm rotation included Reception tray for transport and protection cage for sight tube included EXTRAS FOR TURRET AUTOFILLER 700242 Immerged turbo filler (50 L/min oil flow required) - 1 D.A. HY 2 731 500132 Filling through immerged turbo filler without using vacuum pump: - Independent air vent valve included - 1 D.A. HY - Overfill flexible pipe return to slurry pit - 100 L/min minimum oil flow required 2 596 2835160 Turbo filler on articulation (50 L/min oil flow required) - 1 D.A. HY 2 731 2823700 Third ram on articulation to operate the turret arm - 1 D.A. HY 786 500262 3 rd rigid arm articulation (for lagoon) - 1 D.A. HY 1 200 Turbo filler on articulation : non compatible 500261 Emptying system via turret arm (vacuum pump non synchronised) - 1 D.A. HY 350 (pit non included) 500599 Removable flexible pipe for pumping through reception cone (specify the length) 134 500268 Filling through reception cone for immerged turbo filler 315 2821210 Galvanized cone Ø200 DON'T FORGET THE BRACKET FOR RECEPTION CONE 728 2805600 Bracket to hold reception cone on the tanker 59 RADIO CONTROLLED OPENING OF INDUSTRIAL HYDRAULIC VALVE 2822600 2823810 2822730 2822970 Radio controlled opening of industrial hydraulic valve Ø150 for above ground pit (reception cone not included) - 380 V Hydraulic unit (without plug) - 220 V Hydraulic unit (without plug) Radio controlled opening of industrial hydraulic valve Ø200 for above ground pit (reception cone not included) - 380 V Hydraulic unit (without plug) - 220 V Hydraulic unit (without plug) 3 132 3 232 3 585 3 685 37

SPREADING SPREADER PLATES 1904050 Conical spreader plate Ø100 56 1904070 Conical spreader plate Ø150 109 1904170 Conical spreader plate Ø200 135 1903710 Conical spreader plate Ø150 with rubber cone 128 2800530 Low level spreader plate Ø100 86 2800550 Low level spreader plate Ø150 191 2805520 Low level spreader plate Ø200 219 2810290 Inverted spreader plate Ø150 289 2837920 Inverted spreader plate Ø200 383 1904970 Precision spreader plate Ø150 519 2804900 Road cleaning spreader plate Ø150 144 1903470 Side spreading elbow Ø150 with fin 191 1904780 Side spreading elbow Ø150 with spreader plate 205 500197 Vertical spray spreader plate (inside pipes included) 1 167 500198 Oscillating spreader plate 1 027 500257 Spreader bar for 2 spreader plates Ø150 (spreader plates not included) DO NOT FORGET : Rear door with 2 outlets Ø150 and 2 hydraulic valves Ø150 716 2804500 Spreader bar for 2 spreader plates Ø150 and 1 plate Ø100 (plates not included,1 cap Ø100 included) 2804590 Spreader bar for 3 spreader plates Ø150 (spreader plates not included, 1 cap Ø150 included) 2804560 Spreader bar for 2 spreader plates Ø200 and 1 plate Ø100 (plates not included, 1 cap Ø100 included) 640 703 732 Vertical spray spreader plate REAR LINKAGE Spreader bar with 2 precise spreader plates. Spreading width about 12/15 m Spreader with precision spreader plates. Spreading width about 12/15 m IMPORTANT: Spreader bar fitting depends on size of tank and existing equipment on it (plunger arm for instance). GET ADVICE BEFORE PLACING ORDER! REAR LINKAGE 700350 Bracket for hydraulic semi-rigid rear linkage from TCI 7150 635 3608500 Hydraulic semi-rigid rear linkage (bracket not included) 2 392 1 D.A. HY 700187 Remote control of hydraulic semi-rigid rear linkage 134 (only compatible with a hydraulic distribution) 500137 Floating linkage kit - Switch on control box 457 IMPORTANT: Strongly advised for tankers with injectors working on uneven ground 38

SPREADING SPREADER BAR WITH DOUBLE PLATES 500160 Fixed chassis for spreader bar (in lieu of hyd. rear linkage) MULTI NOZZLE SPREADER BAR 1 450 IMPORTANT: DO NOT FORGET THE BRACKET FOR REAR LINKAGE 500243 Spreader bar for spreading width from 15m up to 21m with 1 distributor Ø150-1 D.A. HY (spreader plates not included) 6 143 500056 Precision spreader plate Ø120 Per pair: 1 002 500057 Vertical spray plate Ø120 Per pair: 1 094 500194 Central low level plate Ø100 508 Characteristics Fully galvanized structure of the spreader bar 1 distributor Ø150 included Pair of double spreader plates fed through 1 outlet 150mm on rear door (spreader plates are not included) 1 hydraulic function to fold/unfold and open/close the spreader bar (hydraulic sequence control unit included) 2 jacks for storage + bracket for flashing beacon included Spreader bar with 2 vertical spray spreader plates OPTIONS: SEE TABLE ON PAGE 41 12 M BAR 3710900 12 m bar - 8 nozzles - 1 distributor Ø150 11 378 3710990 12 m bar - 8 nozzles - 1 vertical macerator Ø150-1 D.A. HY 15 196 12 M - 15 M BAR 500276 12-15 m bar - 10 nozzles - 1 distributor Ø150 14 718 500277 12-15 m bar - 10 nozzles - 1 vertical macerator Ø150-1 D.A. HY 18 536 500278 12-15 m bar - 10 nozzles - 1 central distributor Ø200 + 2 side distributors Ø150 (1) 18 075 500279 12-15 m bar - 10 nozzles - 2 outlets Ø150 + 2 distributors Ø150 (2) 17 852 15 M BAR 3711100 15 m bar - 10 nozzles - 1 distributor Ø150 12 528 3711110 15 m bar - 10 nozzles - 1 central distributor Ø200 + 2 side distributors Ø150 (1) 14 735 3710980 15 m bar - 10 nozzles - 1 vertical macerator Ø150-1 D.A. HY 16 347 500288 15 m bar - 10 nozzles - 2 outlets Ø150 + 2 distributors Ø150 (2) 18 220 15 M - 18 M BAR 500280 15-18 m bar - 12 nozzles - 1 central distributor Ø200 + 2 side distributors Ø150 (1) 18 697 500281 15-18 m bar - 12 nozzles - 2 outlets Ø150 + 2 distributors Ø150 (2) 18 427 18 M BAR 3711200 18 m bar - 12 nozzles - 1 central distributor Ø200 + 2 side distributors Ø150 (1) 15 357 500282 18 m bar - 12 nozzles - 2 outlets Ø150 + 2 distributors Ø150 (2) 16 324 3711210 18 m bar - 12 nozzles - 1 vertical macerator Ø150-1 D.A. HY 20 224 24 M BAR 500283 24 m bar - 16 nozzles - 2 outlets Ø150 + 2 distributors Ø150 (2) Foldable extremities (2 nozzles) - ADVICE: NO ANTI-SPILL SYSTEM 500141 24 m bar - 16 nozzles - 1 central distributor Ø200 + 2 side distributors Ø150 (1) Foldable extremities (2 nozzles) - ADVICE: NO ANTI-SPILL SYSTEM (1) : DO NOT FORGET : Rear door with 1 outlet Ø200 + 1 hydraulic valve Ø200 (2) : DO NOT FORGET : Rear door with 2 outlets Ø150 + 2 hydraulic valves Ø150 22 593 22 390 Characteristics Fully galvanized structure of the spreader bar Distributor(s) or vertical macerator included Feeding pipes Ø60 mm Spreader bar synchronised with the hydraulic rear linkage (rear linkage, folding/unfolding of bar arms, folding/unfolding of the nozzles and side lockers for transport) 2 jacks for storage included Bracket and wiring for flashing beacon included 15 m bar - 10 nozzles - 1 vertical macerator Ø150 39

SPREADING DRIBBLE BAR OPTIONS: SEE TABLE ON PAGE 41 9 M DRIBBLE BAR 3710300 9 m dribble bar - 30 hoses Ø40-1 vertical macerator Ø150-1 D.A. HY 16 295 12 M DRIBBLE BAR 3710010 12 m dribble bar - 40 hoses Ø40-1 vertical macerator Ø150-1 D.A. HY 18 044 12 M - 15 M DRIBBLE BAR 500271 12-15 m dribble bar - 48 hoses Ø40-1 vertical macerator Ø150-1 D.A. HY 21 384 3712300 12-15 m dribble bar - 48 hoses Ø50-1 vertical macerator Ø200-1 D.A. HY (1) 26 426 15 M DRIBBLE BAR 3710400 15 m dribble bar - 48 hoses Ø40-1 vertical macerator Ø150-1 D.A. HY 20 347 3711070 15 m dribble bar - 48 hoses Ø50-1 vertical macerator Ø200-1 D.A. HY (1) 25 392 3711030 15 m dribble bar - 48 hoses Ø40-2 vertical macerators Ø150-1 D.A. HY + drain (2) 24 517 3711080 15 m dribble bar - 48 hoses Ø50-2 vertical macerators Ø150-1 D.A. HY + drain (2) 27 342 15 M - 18 M DRIBBLE BAR 3711500 15-18 m dribble bar - 48 hoses Ø40-1 vertical macerator Ø150-1 D.A. HY 23 687 500287 15-18 m dribble bar - 48 hoses Ø50-1 vertical macerator Ø200-1 D.A. HY (1) 28 732 3711900 15-18 m dribble bar - 48 hoses Ø40-2 vertical macerators Ø150-1 D.A. HY + drain (2) 27 932 500272 15-18 m dribble bar - 48 hoses Ø50-2 vertical macerators Ø150-1 D.A. HY + drain (2) 30 682 18 M DRIBBLE BAR 3710500 18 m dribble bar - 48 hoses Ø40-1 vertical macerator Ø150-1 D.A. HY 21 496 500273 18 m dribble bar - 48 hoses Ø50-1 vertical macerator Ø200-1 D.A. HY (1) 26 541 3711040 18 m dribble bar - 48 hoses Ø40-2 vertical macerators Ø150-1 D.A. HY + drain (2) 25 668 3711050 18 m dribble bar - 48 hoses Ø50-2 vertical macerators Ø150-1 D.A. HY + drain (2) 29 368 18 M - 21 M DRIBBLE BAR 500274 18-21 m dribble bar- 48 hoses Ø40-1 vertical macerator Ø200-1 D.A. HY (1) 27 056 500275 18-21 m dribble bar- 48 hoses Ø50-2 vertical macerators Ø150-1 D.A. HY + drain (2) 31 833 (1) : DO NOT FORGET : Rear door with 1 outlet Ø200 and 1 hydraulic valve Ø200 (2) : DO NOT FORGET : Rear door with 2 outlets Ø150 and two hydraulic valves Ø150 Characteristics of PICHON dribble bars Fully galvanised structure of the dribble bar 1 hydraulic function for the PICHON macerator (reversing function for blockage also included) Dribble bar synchronised with the hyd. rear linkage: - rear linkage - folding/unfolding of the bar arms - folding/unfolding of the hoses (anti-drip) - side lockers for transport 2 jacks for storage included Bracket and wiring for flashing beacon included 40

SPREADING RAMPE 24 M 500139 24 m Vogelsang dribble bar - 80 hoses Ø40-2 vertical macerators Exacut 40/40-1 D.A. HY - Teleshift to reduce length of side arms + TopSwing 180 rotation to fold the outer ends inside - Slope compensation / Oscillation compensation - 4 points linkage + 2 jacks for storage + road lights included 500437 Shut-off air kit for dribble bars 15, 18 or 21m - Air supplied from tractor o 24 m to 21 m (- 10 outlets) / 21 m to 18 m (- 10 outlets) / 18 m to 15 m (- 10 outlets) 54 570 3 785 EXTRAS FOR MULTI NOZZLE SPREADER BAR & DRIBBLE BAR Description Code for multi nozzle bar Code for dribble bar Shut off valve to adjust spreading width 700315 700314 each : 64 Kit folding / unfolding to prevent spilling 700313 700313 336 (strongly advised for storing off-season and turret autofiller) - 1 D.A. HY Feeding from top rear Ø150 : 500163 500163 1 794-1 hydraulic valve Ø150-1 D.A. HY - Internal column + pit Feeding from top rear Ø200 : 500255 500255 2 220-1 hydraulic valve Ø200-1 D.A. HY - Internal column + pit Left or right side selection valves - 2 D.A. HY 500166-1 660 Left & right slope level control on chassis - 1 D.A. HY 500148 500148 1 605 ADAPTATIONS TO EXISTING TANK 500410 Brackets for future dribble bar (hydraulic side lockers + floating kit on rear linkage) 1 301 ELECTRONIC FLOWMETER Price 700125 Electronic flowmeter Ø150-1 D.A. HY - Hydraulic industrial guillotine valve Ø150 - Electromagnetic flowmeter DN150 ADVICE: Don't forget recessed rear door Ø950 for flowmeter - See p.14 500284 Electronic flowmeter Ø200-1 D.A. HY - Hydraulic industrial guillotine valve Ø200 - Electromagnetic flowmeter DN200 - Internal column + pit 7 315 9 435 1905490 Printer 930 ADVICE: Possibility to add a shutting hydraulic valve (See p.34) Electronic flowmeter is not compatible with: - Rear door with 2 outlets Ø150 - Slope ground kit Characteristics Electromagnetic flowmeter SIEMENS Flowmeter programmer with protective casing Speed Sensor Hydraulic socket with electro-distributor and proportional flow rate regulator to control the electronic flow controller valve in manual and automatic modes Touch-sensitive display to program the quantity and the working width from the cab Power supply with 3 x 12V pins Hyd. kit to control the valve + USB port to transfer datas 41

INJECTORS DON'T FORGET THE HYDRAULIC REAR LINKAGE FOR THE WHOLE RANGE OF INJECTORS (See P.38) Injector mounting depends on size of tanker. Get advice from us to check weight balance before placing order. ARABLE TINE INJECTOR - MODEL EL61 Description Working width Vibroflex tines Square tines Code Price Code Price Injector - Non folding - 7 tines - Distributor 3 m 3612000 6 010 3612100 5 601 Injector - Non folding - 7 tines - Vertical macerator - 1 D.A. HY 3 m 3612010 11 068 3612110 10 658 Injector - Folding - 9 tines - Distributor 4 m 3612020 9 900 3612120 9 373 Injector - Folding - 9 tines - Vertical macerator - 1 D.A. HY 4 m 3612030 14 950 3612130 14 428 Injector - Folding - 11 tines - Distributor 5 m 3612040 10 877 3612140 10 234 Injector - Folding - 11 tines - Vertical macerator - 1 D.A. HY 5 m 3612050 15 932 3612150 15 289 Injector - Folding - 13 tines - Distributor 6 m 3612060 11 874 3612160 11 115 Injector - Folding - 13 tines - Vertical macerator - 1 D.A. HY 6 m 3612070 16 932 3612170 16 173 ADVICE: Hydraulic industrial valve with adjustable flow strongly advised Characteristics Non folding galvanized chassis with 2 beams 120mm squar 2 adjustable wheels for depth control Tines fed through Ø50mm pipes Vibroflex or square tines Tine centre-to-centre: 450mm Adjustable height of tines in the wheel pathway 1 hydraulic function for the PICHON vertical macerator (fed through 1 pipe Ø120mm) Road light bar included 500567 Rear bracket to spread with 333 a spreader plate or a tri spreader bar 500129 Pneumatic wheels kit for depth control 566 500130 60mm Øpipe kit for injector 1 947 STUBBLE DISC INJECTOR - MODEL EL63 Code Description Working width 500285 Injector - Folding - 14 discs (7 injector legs/7 covers) Vertical macerator - 1 D.A. HY 500286 Injector - Folding - 20 discs (10 injector legs/10 covers) Vertical macerator - 1 D.A. HY Price 5,00 m 19 800 6,00 m 22 350 Characteristics Folding galvanized chassis with 2 beams 100mm square 2 adjustable wheels for depth control 14 or 20 stubble discs Ø560 fed through Ø50 mm pipes Adjustable height of tines in the wheel pathway 1 hyd. function for the PICHON vertical macerator fed through 1 pipe Ø120 Road light bar included 42

INJECTORS TRAILING SHOE - MODEL EL8 Code Description Working width 3630000 Folding Trailing Shoe with 34 shoes Vertical macerator - 3 D.A. HY 500167 Folding Trailing Shoe with 40 shoes Vertical macerator - 3 D.A. HY Price 7,30 m 20 885 8,50 m 24 420 IMPORTANT: Non compatible with the hydraulic rear linkage 500165 Fixed chassis for Trailing Shoe EL8 1 450 500193 Feeding from top rear Ø150 for EL8: - 1 hydraulic valve Ø150-1 D.A. HY - Internal column + stone trap 1 943 500140 Feeding from valve on rear door (valve not included) 327 500267 Rear spreading (spreader plate not included) 944-1 hydraulic valve Ø150-1 D.A. HY UNIVERSAL "BIG D" INJECTOR - MODEL EL7 Characteristics Code Description Working width 3620010 Injector - Non folding - 6 discs - Distributor 3,00 m 10 532 3620080 Injector - Non folding - 6 discs - PICHON macerator - 1 D.A. HY 3,00 m 15 790 3620030 Injector - Folding - 8 discs - Distributor 4,00 m 17 690 3620100 Injector - Folding - 8 discs - PICHON macerator - 1 D.A. HY 4,00 m 22 950 ADVICE: Hydraulic industrial valve with adjustable flow strongly advised Fixed chassis with hydraulic scissor-type folding/unfolding PICHON vertical macerator with stone trap and reversing function for blockage 34 or 40 shoes fed through Ø40 pipes 1 hyd. function for folding/unfolding 1 hyd. function to put down/up the shoes Anti-spilling system by reversing shoes R/L mechanical oscillation of the chassis Road light bar included Price Characteristics Galvanized chassis 120mm square Parts mounted on sprung suspension Compression wheels to prevent ground shift 6 or 8 discs fed through Ø50mm pipes Disc centre-to-centre: 500mm Disc diameter: 640mm Macerator or distributor Ø120mm Electric device for control of depth injection Road light bar included 500567 Rear spreading chassis for splash plate or tri spreader bar 333 700300 Shock absorber on hydraulic rear linkage with 755 nitrogen accumulator (strongly advised) 43

ELECTRIC - HYDRAULIC CONTROL SYSTEM HYDRAULIC DISTRIBUTION Hydraulic distribution Radiocontrol version Electric control version Radiocontrol version Description Code Price Code Price Hydraulic distribution 3 functions DA - 1 D.A. HY 320540 2 937 500168 3 743 Hydraulic distribution 4 functions DA - 1 D.A. HY 320541 2 993 500169 3 809 Hydraulic distribution 5 functions DA - 1 D.A. HY 320542 3 201 500170 4 493 Hydraulic distribution 6 functions DA - 1 D.A. HY 320543 3 322 500171 4 605 Hydraulic distribution 7 functions DA - 1 D.A. HY 320544 3 456 500172 4 671 Hydraulic distribution 8 functions DA - 1 D.A. HY 320545 3 745 500173 5 178 Hydraulic distribution 9 functions DA - 1 D.A. HY 500176 4 099 500174 5 471 Hydraulic distribution 10 functions DA - 1 D.A. HY 500178 5 182 500175 5 932 Hydraulic distribution 11 functions DA - 1 D.A. HY 500180 5 605 500177 6 250 Hydraulic distribution 12 functions DA - 1 D.A. HY 500183 5 662 500179 6 414 Hydraulic distribution 13 functions DA - 1 D.A. HY 500181 5 765 500182 6 860 Hydraulic distribution 14 functions DA - 1 D.A. HY 500191 5 869 500192 6 783 The hydraulic distribution comes with a galvanized protection box. Electric supply on 3pins plug 12V. HYDRAULIC OUTFLOW REQUIRED: 60 L/MN AT 180 BAR. The radiocontrol comes with a transmitter (100m range maximum) EXTRAS FOR HYDRAULIC DISTRIBUTION CAN Version 500252 Joystick to control 2 functions of the hydraulic distribution 256 (Hyd. distribution with electric control box necessary) 190640 In-cab fixing of CAN electric control box 12 3202940 Filter on hydraulic circuit (pressure line) 302 500013 Load Sensing for oil on demand - Please make sure 325 tractor is equipped with external load sensing 500136 Priority kit to control simultaneously management two hydraulic functions (motor and cylinders) This option allows for instance to open the rear valve or to operate the rear linkage without turning the macerator off. 411 500415 Additional hydraulic function DA for existing tanker (Switch included for electric control) 190 EXTRAS FOR RADIOCONTROL VERSION 3206460 Additional remote for hydraulic distribution with 3 functions DA 1 200 3205660 Additional remote for hydraulic distribution with 4 functions DA 1 200 500184 Additional remote for hydraulic distribution with 5 functions DA 1 500 3205590 Additional remote for hydraulic distribution with 6 functions DA 1 500 3205670 Additional remote for hydraulic distribution with 7/8 functions DA 1 600 3207710 Additional remote for hydraulic distribution with 9/10/11/12 functions DA 1 750 500186 Additional remote for hydraulic distribution with 13/14 functions DA 1 850 44

ELECTRIC - HYDRAULIC CONTROL SYSTEM TACT-MASTER TOUCH SCREEN CONTROL ADVICE: This new system controls automatically all operations from filling to spreading. Manually, functions are done via the touching screen and joystick. 500265 Tact-Master touch screen control Automated functions for filling, transport and spreading IMPORTANT : Only available with BP2 autofiller and plunger autofiller 8 850 HYDRAULIC COUPLING MULTIX Couplings on rear linkage 500266 Hydraulic couplings 6 functions (male/female) - 3/8" DN10 Allows to connect under pressure 500254 Hydraulic couplings 2 functions (male/femelle) - 1/2" DN12,5 Allows to connect under pressure 1 582 550 ELECTRIC SWITCHES 320140 Electric switch 2 functions DA (6 way diverter 3/8 ) - 1 D.A. HY 500012 Electric switch 2 functions DA (6 way diverter 1/2 ) - 1 D.A. HY FOR HYDRAULIC MOTOR 1 060 1 350 320124 Electric switch 3 functions DA 2 030 (8 way diverter 1/2 ) - 1 D.A. HY ADVICE: - In-cab electric switch (2 or 3 functions) - Electric supply on 3pins plug 12V - Specify which functions (2 or 3) are to be controlled - Remote control not compatible with an electric switch 2 position switch 3 position switch ELECTRIC CONNEXIONS Possible configuration Code Electric plug(s) Price Electric control + cooler (water or oil) Electric control + 2 light Electric control + 1 flashing beacon Electric control + 2 light + 1 flashing beacon Radiocontrol + light + 1 flashing beacon 500006 Plug 50 A + cable to be connected to tractor's battrery + 1 relay 485 500008 Plug 50 A + cable to be connected to tractor's battrery + 1 relay + 1 switch on electric control box 500008 Plug 50 A + cable to be connected to tractor's battrery + 1 relay + 1 switch on electric control box 500007 Plug 50 A + cable to be connected to tractor's battrery + 2 relays + 1 switch on electric control box 500229 Plug 50 A + cable to be connected to tractor's battrery + 2 relays + switches on additional box 516 516 546 743 500005 Extra cable to be connected to tractor's battery 152 2301750 Spiral connection cable - 2 x 7 pins plug 12V 183 ADVICE: SPIRAL CONNECTING CABLE - 2 OFF 3 PINS PLUG 12V: NOT AVAILABLE 45

JETTING - WASHING EXAMPLE OF QUOTATION FOR POWER JETTING TANK > 8100 L TANK MODEL (2000 L CLEAN WATER / 6100 L MUD) 2802520 8100 L (1780 Gal.) Tank - Ø1500 (p.12) 4 755 1807670 Group 540 T P620R/KF36/SI4 (p.47) 19 317 2201090 Wide angle P.T.O. shaft type 6 640 + friction clutch 1 3/8 (p.21) 2610430 Axle 130/10-2000 (p.27) 2 355 2604510 Wheels 445/65 R 22,5-18R22,5 (p.24) 2 x 1 160 283001 Inside partition Ø1500 + man hole Ø500 (p.47) 1 332 CLEAN WATER SIDE 2000 L 4701530 Flanged fill point Ø100 (p.16) 2 x 66 283007 Blank point + ¼ turn valve + symmetrical 523 connector DN 100 with locking. Right-sided (p.47) 500463 Emptying valve 2 clear water side (p.47) 200 490100 Top cover Ø300 mm (non pressurised) (p.47) 463 2815080 Ladder for access to top fill (p.16) 359 283049 Open to air vent (p.47) 250 1902130 3 sight glass (p.16) 3 x 82 500020 3 hydraulic valves for H.P. shutting to reel(s) Back to water tank - 1 D.A. HY (p.47) 788 500457 Water security (p.47) 840 MUD SIDE 4701530 Flanged fill point Ø100 (p.16) 2 x 66 283007 Blank point + ¼ turn valve + symmetrical 523 connector DN 100 with locking. Right-sided (p.47) 500195 Top security + self emptying front security 1 180 Ø100 (p.21) 500592 Brackets for sucking arm (p.48) 791 283026 Sucking arm- 4 D.A. HY (p.48) 10 238 Option : 270104 Epoxy paint applied to inside of tank (2 coats) (p.12) REAR DOOR 283033 Rear door Ø1500 full opening with hydraulic rams - 1 D.A. HY (p.48) 6100 L x 0,55 3 260 500590 Manual locking (nb 4) (p.48) 485 1902950 Hydraulic industrial guillotine valve Ø150 1 D.A. HY (p.34) 669 2821240 Standard coupling for Ø150 valve - Lg 350 mm (p.47) 77 500619 Sight tube Ø80 Jetting/Washing (p.47) 650 500455 ¼ turn valve on rear door for decanting (p.47) 727 2880060 Sprung drawbar for TCI 7150 to 10400 L (p.18) 1 361 3200650 Hydraulic jack (manual pump SE) (p.18) PICHON advise retractable jack 708 500549 Bolted ring hitch ISO 5692 (p.18) 307 280263 Hydraulic pipe and electric cable frame on 174 drawbar (p.18) 500173 Hydraulic distribution 8 functions DA 5 178 radiocontrol version (p.44) (3 ways valve, rear door, rear valve, hydraulic reel arm) 3205670 Additional transmitor for 8 functions (p.44) 1 600 Adviced before to be lost 3202940 Filter on hydraulic circuit (pressure line) (p.44) 302 500229 Plug 50 A + direct tractor batery cable + 2 transfer + switch on control box (p.45) 743 ACCESSORIES 2830950 Equipment rack (on power washing model) (p.47) 2 x 998 500125 Mudflaps on rear (p.15) 186 500017 Standard light (p.15) 174 500161 Flashing beacon brackets (p.15) 78 700103 Flashing beacon (p.15) 49 700105 Working lights (qty 2) (p.15) 128 1905410 Polyurethane tool box (p.17) 277 1905530 Hand washing water reservoir 25 L (p.17) 217 500199 Ø100 flexible pipe - 3 m (p.47) 143 2401250 Ø100 flexible pipe - 3 m (p.47) 5 x 265 190459 Spanner (p.47) 2 x 16 500039 Tap Ø150 - Reducer 102x114 (p.47) 158 1904040 Tap Ø150 (p.47) 21 283042 Hydraulic reel with adjustable speed 80 m pipe HP 3/4-1 D.A. HY (p.49) 5 696 1808300 Reacting nozzle CELLINA 3/4"F (p.49) 81 283043 Manual reel with 60 m pipe HP 3/8 (p.49) 2 679 1808430 Reacting nozzle SILE 3/8 (p.49) 68 2830220 Washing gun (p.49) 131 TOTAL PRICE 80 419 Get advice from the salesman to valid your quotation. STRONGLY ADVISED: 472075: FIRST USE ON-SITE ASSISTANCE ON REQUEST ADVICE : EXTERNAL PAINTING ONTO GALVANIZE IS OPTIONAL, CONTACT US. 46

JETTING - WASHING ACCESSOIRES EQUIPEMENT FOR JETTING MACHINE 283041 Inside partition Ø1100 + man hole Ø500 1 159 283040 Inside partition Ø1250 + man hole Ø500 1 217 283000 Inside partition Ø1400 + man hole Ø500 1 275 283001 Inside partition Ø1500 + man hole Ø500 1 332 283045 Inside partition Ø1600 + man hole Ø500 1 390 283050 Inside partition Ø1700 + man hole Ø500 1 448 283051 Inside partition Ø1800 + man hole Ø500 1 556 283002 Inside partition Ø1900 + man hole Ø500 1 602 283096 Inside partition Ø2000 + man hole Ø500 1 685 500463 Emptying valve 2 clear water side 200 500619 Sight tube Ø80 Jetting/washing 650 500587 2nd overfill security Ø60 979 500588 2nd overfill security Ø76 (without self emptying 2 nd secu) 1 156 500589 2nd overfill security Ø100 (without self emptying 2 nd secu) 1 205 283004 Liaison between the partitions for total filling water 840 490100 Top cover 300 mm Ø(non pressurised) 463 283007 Blank point + ¼ turn valve + symmetrical connector DN 100 with locking 523 500455 ¼ turn valve on rear door for decanting + symetrical coupling DN 100 with locking 727 283049 Open to air vent Ø76 250 500453 Open to air vent with shutting valve Ø76 400 500020 3 hydraulic valves for H.P. shutting to reel(s). Back to water tank - 1 D.A. HY 788 500457 Water security 840 2830560 Open top equipment box (on agricultural model) each : 767 2830950 Equipment rack (on power washing model) each : 998 500458 Support pick-shovel-brush 368 500459 Road cone support 231 500460 Aluminum ladder 3 m with its support 368 500471 TRIFLASH with LED 12V, manual fold - Double face class 1 800 PIPES ACCESSORIES 2401250 Flexible pipe Ø100-3 m. (SUPER HELIFLEX) - 2x1/2 symetrical coupling with locking 265 500199 Flat pipe Ø100-3 m (H8 Blue) - 2x1/2 symetrical coupling with locking 143 2821240 Standard coupling for Ø150 valve - Lg 350 mm 77 500039 Reducer Ø150 102x114-1/2 symetrical coupling 102x114 158 1904040 Tap Ø150 21 190609 Filter / Valve / ½ symetrical coupling 102x114 208 1906140 Reducer Ø100-80 - 2x1/2 symetrical coupling with locking 79 190459 Spanner 16 500462 Suction stick with valve DN65-1/2 symetrical connectors alu DN100 400 GROUPS (VACUUM PUMP + HP PUMP) 1807670 Group 540 T P620R/KF36/SI4 Vacuum pump JUROP LC420 cooled by water, flow 12000 L/mn (720m3/h), silencer/deoiler/filter, filter air and valve of empty breakage. Pump High pressure PRATISSOLI KF36, flow 153 L/mn with 130 bars, filter water, valve of safety, valve of regulation by-pass and safety misses water with sound signalling hooter. Case of clutch with 2 manual first shafts, training 540 RPM. ADVICE: Do not forget the overfill security Ø100 19 317 47

JETTING - WASHING HYDRAULIC DOORS (OUTLETS Ø150) Orientation des 2 enrouleurs sur un même pivot 283033 Rear door Ø1500 full opening with hydraulic rams - 1 D.A. HY 3 260 283031 Rear door Ø1600 full opening with hydraulic rams - 1 D.A. HY 3 276 283030 Rear door Ø1700 full opening with hydraulic rams - 1 D.A. HY 3 292 283036 Rear door Ø1800 full opening with hydraulic rams - 1 D.A. HY 3 308 500581 Rear door Ø1900 full opening with hydraulic rams - 1 D.A. HY 3 329 500582 Rear door Ø2000 full opening with hydraulic rams - 1 D.A. HY 3 339 500590 Manual locking (Nb 4) 485 500144 Manual locking (Nb 6) Ø1800 655 500591 Hydraulic locking (Nb 4) 2 794 500145 Hydraulic locking (Nb 6) Ø1800 3 897 ADVICE: DO NOT FORGET THE TYPE OF LOCKING SUCKING ARM 500592 Bracket for turret sucking arm 791 283026 Turret sucking arm, hydraulic lift and down, hydraulic rotation (~270 ), telescopic arm, hydraulic valve, 100 mm Øpipe - 4 D.A. HY (bracket not included) 10 238 Angle de rotation maxi de la potence environ 270 SUCTION REELS Rear and twistable suction reel : hydraulic folding/unfolding, twist ram, hydraulic suction valve D150 with internal column and deflectors - 3 D.A. HY ATTENTION : This reels fits only onto hydraulic full opening door. 500464 500465 500466 500467 - ~27m pipe DN100 with ½ symetrical connectors + tap. - ~50m pipe DN80 with ½ symetrical connectors + tap. Top suction reel INOX with guide : hydraulic folding/unfolding, hydraulic valve DN125 with internal column and deflectors. - 2 D.A. HY - ~25m pipe DN100 with ½ symetrical connectors + tap. - ~30m pipe DN80 with ½ symetrical connectors + tap. 13 550 13 550 22 805 22 805 48

JETTING - WASHING REELS 283021 Fixed reel with 10 m hose HP 3/8 (12x17) 499 283015 Manual reel with swivelling joint 2 406 with 20 m pipe HP 3/8 (12x17) 283016 Manual reel with swivelling joint 2 542 with 40 m pipe HP 3/8 (12x17) 283043 Manual reel with swivelling joint 2 679 with 60 m pipe HP 3/8 (12x17) 500014 Hydraulic motor kit for reel 3/8 1 D.A. HY 1 003 500142 Guide pipe on roller 3/8 310 283019 Hydraulic reel with speed control 60 m pipe HP 3/4 (20x27) swivelling at 90 Hose guide included - 1 D.A. HY 5 515 283046 Hydraulic reel with speed control, 80 m pipe HP 1/2 (15x21) swivelling at 90 Hose guide included - 1 D.A. HY 283042 Hydraulic reel with speed control, 80 m pipe HP 3/4 (20x27) swivelling at 90 Hose guide included - 1 D.A. HY 5 515 5 696 2830220 Washing gun 131 Hydraulic reel with speed control, 80 m de pipe HP 3/4 swivelling 90 Guide for manual reel Reels mounted onto same pivot (swivelling 90 ) Manual reel with swivelling joint, 60 m pipe HP 3/8 Washing gun NOZZLES Reacting nozzle Rotating nozzle Flat nozzle 1808430 Reacting nozzle SILE 3/8"F, Ø20x34, jets 35 jet (+ front jet on request), 40 gr 68 1808290 Reacting nozzle CELLINA 1/2"F, Ø28x46, 35 jet + front jet insert M6x8*, 95 gr 75 1808300 Reacting nozzle CELLINA 3/4"F, Ø35x50, 35 jet + front jet insert M6x8*, 170 gr 81 * To close the front jet, use the screw tap supplied with the nozzles. 500143 Rotating nozzle RDS-BC 3/8"F, Ø40X80, angle jets 2x90 / 2x135 544 1808450 Rotating nozzle TREMOL 1/2"F, Ø35x60, 25 jet, rear jets insert M4x5, 90 330 rotating jets insert M4x5 1808460 Rotating nozzle TREMOL 3/4"F, Ø50x83, 20 jet, rear jets insert M6x8, 90 538 rotating jets insert M6x8 500472 Flat nozzle with 4 ceramic inserts at 5 3/4 360 Flat nozzles are designed to penetrate into sand, mud and other sediments. 500473 High rate nozzle CANIN 75 3/4 These very efficient nozzles use 100% flow available. The internal cone gives high pressure and precise jet. 485 CANIN nozzle GALVANIZED TIPPING Hot dipped galvanized chassis with tipping ram (direct to tractor) ATTENTION : retractable jack advised (direct to tractor). 500468 On single axle tank 10 400 L 11 500 500469 On double axle tank up to 15700 L 12 500 (TANDEM only) 500470 On tankers from 16800 L (TANDEM or TRIDEM only) 13 000 49

JETTING - WASHING HYDRAULIC CLEANER 500593 Hydraulic cleaner high pressure Hydraulic power required: ~ 33 L/mn at 180 bars Outflow: 30 L/mn à 150 bars 500146 Double hydraulic cleaner high pressure Hydraulic power required: ~ 65 L/mn at 180 bars Outflow: 60 L/mn (2x30 L) à 150 bars 2830240 Flexible HP 1/4 (length 10 m) + nozzle 1/4 to fittsur onto reel HP 3/8 for cleaning pipes ADVICE: Equipment required on a basic tank: - Internal partition (p.47) - 100mm Øopening (code 4701530) - Valve + coupling (code 283007) - Emptying valve 2 clear water side (500463) - Manual top fill Ø300 (code 490100) - Internal ladder (code 2815080) - Open to air vent (code 283049) - Level indicator (codes 1902130 or 2816450) - Manual reel, pipe HP 3/8 (p.49) - Washing gun (code 2830220) - Equipment rack (p.47) or double pipe support (p.14) STRONGLY RECOMMENDED - Industrial water cooled vacuum pump (p.19) - Water security (code 500457 p.47) 4 216 7 623 171 Cleaner for sanitation work at individual house: cleaning sewage pit, clearing pipes Ø150 mm max HOOK LIFT TANKERS Characteristics Galvanized or painted tank on skip chassis for hydraulic hook lift on lorry Chassis build to NF R 17-107 standard with 180 UPN 2 rear rollers. V hitch. Various equipment and accessories MACHINES BUILT TO CUSTOMER SPECIFICATIONS. CONTACT US WITH YOUR REQUIREMENTS. OUR RANGE OF HOOK LIFT TANKERS CAN FIT LORRIES FROM 7.5 UP TO 32 TONS. SLURRY MIXERS SLURRY PUMPS 211010 LT15 Pump - 540 rpm - 3,5 m + galvanized troley 8 005 211156 PTO shaft with friction clutch 536 Characteristics Galvanized frame PTO driven Upper exit (6 male coupling) Stainless steel drive shaft Heavy duty cast iron Vertical & horizontal orientation on recycling exit Pit depth: from 2,80 m up to 3,30 m Power required: 28 to 40 Kw Outflow: from 90 up to 522 m3/h 50

SLURRY MIXERS SLURRY MIXERS Code Description Length Pit depth. Weight Price (kg) 290150 B31 Mixer (blade/counter blade) 5 m 2 to 3 m 390 3 105 - Articulated galvanized body - Min. opening of pit: 750 x 600 mm 290000 B4 Mixer (without screw) 5 m 3 m 420 3 105 - Galvanized chassis 290450 B41 Mixer (without screw) - Galvanized chassis 7 m 4 m 620 4 735 290500 B410 Mixer (without screw) - Galvanized chassis 10,50 m 5 m 960 9 720 B31 (5m) B4 (5m) B41 (7m) 3 m 3 m 4 m 4 m Equipments supplied with all stirrers Hydraulic ram to adjust depth angle PTO shaft with shear bolt protection 55 mm Ødrive shaft 2 support stands EXTRAS FOR SLURRY MIXERS Description Code B4 Code B41 Code B410 Price Ø600mm screw with 600mm thread 290508 290508-657 Ø600mm screw with 700mm thread 290212 290212-915 Ø600mm screw with 800mm thread 290213 290213-930 Ø700mm screw with 700mm thread 290211 290211 1 132 Ø600mm screw with 600mm thread (suction version) 290210 290210-696 Ø600mm screw with 700mm thread (suction version) 290217 290217-957 Casing on Ø600mm screw for Dutch style pit 290890 290890-494 2m20 extension 290702 - - 1 508 Protection for plastic lined lagoon pit 290250 290250-270 Protection float - - 500436 600 Centralised greasing near tractor's linkage 700355 700355 500239 559 Additional cost for star tube P.T.O. shaft - 500037-471 Additional cost for wide angle P.T.O. shaft 500038 500038 500038 624 Oversized transmission for tractors over 100 HP 500289 500289-719 Notebook tube Ø125mm 1905800 1905800 1905800 71 Hour meter 500135 500135 500135 336 Road markings for slurry mixer 290012 290012 290012 170 51

DISCOVER THE VARIOUS PICHON SOLUTIONS: SLURRY TANKERS FROM 2 600 TO 30 000 L MUCK SPREADERS FROM 8 TO 24 M 3 COMPACT LOADERS FROM 26 TO 60 HP SPECIFIC EQUIPMENTS ZI DE LAVALLOT - B.P. 21 29490 GUIPAVAS - FRANCE TEl: + 33 298 344 100 - Fax : + 33 298 344 120 email : info@pichonindustries.com MAY 2014 EDITION - PICHON www.pichonindustries.com