Date: Bulletin: Subject: Distribution: (Updated) April, 2013 MF13-10PMB Competitive Bulletin: Massey Ferguson 4600 Series vs John Deere 5E Series Massey Ferguson Tractor Dealers TABLE OF CONTENTS Introduction Model Breakdown / Key Features Key Points Comparison / Conclusion Competitive Specifications Pg 1 Pg 2 Pg 3 Pg 7 INTRODUCTION The new Massey Ferguson 4600 series takes the utility tractor to a whole new level in design, features, and rugged capability. The introduction of this new product line in the market place will allow Massey Ferguson dealers to become more competitive versus the product offerings of other major manufacturers. The MF4600 series utility tractors are designed to stand out and perform in a market full of competing tractor brands. One major competitor is John Deere, with its 5E series utility tractors. These capable Massey Ferguson tractors are built to provide a rugged, durable loader tractor to the utility tractor market with just the right blend of features and functionality. To aid in selling the MF4600 series against the JD 5E series, this bulletin will provide in-depth comparisons of the major features of each brand, as well as a quick reference of product specifications. For your assistance, the marketing team is available to answer any questions you may have about Massey Ferguson tractors, as well as competitive products. Please do not hesitate to take advantage of this valuable resource. Thanks and good selling! AGCO Under 100HP Marketing Team 1
*Manufacturer s Published Estimates MODEL COMPARISON MF4600 Series John Deere 5E Series MF4608 @ 63.5* PTO hp (47.4 kw) JD 5083E @ 69 PTO hp (51.5 kw) MF4609 @ 72* PTO hp (53.7 kw) JD 5085E @ 70 PTO hp (52.2 kw) MF4610 @ 80* PTO hp (59.7 kw) JD 5093E @ 79 PTO hp (58.9 kw) JD 5100E @ 85 PTO hp (63.4 kw) JD5101E @ 86 PTO hp (64.1 kw) MASSEY FERGUSON KEY SELLING FEATURES Engine - All MF4600 Series tractors boast an all-new 3.3L 3-cylinder water cooled diesel engine from AGCO Power that is EPA Tier 4i complaint. Each engine features turbocharging and intercooling, a Bosch high pressure common rail (HPCR) fuel injection system, and the SisuTronic EEM4 electronic engine controls system. External exhaust gas recirculation (EGR) and a diesel oxidation catalyst (DOC) help the engine to meet the tough emissions requirements. Transmission - All MF4600 series tractors have a power shuttle transmission as standard equipment. There are no other options. 6 synchronized gears and 2 ranges allow for 12 forward and 12 reverse speeds. The shuttle lever is located near the steering wheel for simple left hand operation. A wet multi-disc clutch is electronically actuated via shuttle lever or foot pedal. Hydraulics - The MF4600 has a hefty 17.1 gpm of hydraulic flow available to the loader and implements. An integrated loader joystick is available as a factory option for easy, clean loader installation. 540/1000 RPM PTO - All MF4600 models have both 540 and 1000 RPM capability with interchangeable shafts (both shafts are included with the tractor). The PTO is electronically engaged via push button. Benefit - The engines are smaller, lighter, and have fewer moving parts to keep manufacturing costs down while improve maneuverability and visibility. And, engine power and performance has been increased using state-of-the -art manufacturing materials and technologies and computerized engine control systems. This new 3-cylinder engine generates more power and more torque than the 4-cylinder engines used in the prior MF2600 HD series, yet emit less pollution. Benefit - The 12x12 transmission offers a wide range of working speeds to accommodate operation in many different applications. The power shuttle makes loader operation smooth and convenient without having to use the foot clutch to change direction. Positioning the shuttle lever near the steering wheel allows the left hand to steer and change direction while the right hand runs the loader. The wet multi-disc main clutch is durable for years of trouble-free performance. Benefit - The higher hydraulic flow results in faster operation of hydraulic implements. Cycle times of the loader and other implements will be reduced, allowing more work to be done, improving productivity. Benefit - Having both PTO speeds allows the tractor to drive a wider range of implements for greater job site capability. Including both shafts reduces the numbers of optional accessories that must be ordered. Configurations - All MF4600 models are available in either 2wd or 4wd configurations, and either open platform or cab. Multiple tire options are available, and the customer can select the number of rear remote valves, up to three. 2 Benefit - Having a wide range of configurations allows the end user to customize the tractor to the operation at hand. The many different options means the tractor can be tailored to fit a specific task, or loaded up to handle multiple roles.
KEY POINTS COMPARISON Engine and Hood Durable single-piece composite hood opens widely for full engine access. 3.3L 3-cylinder direct injection diesel engine designed and built by AGCO Power. 2,200 RPM rated engine speed means fewer revolutions over the life of the tractor, saving fuel and wear and tear. Common engine for all tractor models. Bosch HPCR fuel injection system with electronic engine management for precise control of engine operation and performance. Wastegate turbocharger and intercooler forces cool, dense air into cylinders for better power. External EGR and DOC - no maintenance emissions system. EPA Tier 4i compliant all models. Electronic engine diagnostics and service. Modern look and aggressive styling. Transmission 12x12 power shuttle transmission is standard equipment. Electro-hydraulic direction and shuttle capability, mechanical levers for gear selection. 6 synchronized gears and 2 ranges allow for shift-onthe-go through all 6 gears (no ranges), from a low speed to max speed, for easy heavy transport operations. Power shuttle has wet multi-disc clutch for durability. Convenient left hand shuttle lever near steering wheel. Two right hand shift levers near seat. Engine and Hood Single-piece composite hood opens for full engine access. 4.5L 4-cylinder PowerTech direct injection diesel engine designed and built by John Deere. 2,400 RPM rated engine speed means more revolutions over the life of the tractor, using more fuel and generating greater wear and tear. Common engine size for all tractor models. John Deere fuel injection system with mechanical operation and management is less precise and cannot monitor and then react to changing conditions. Turbocharged only means the engine gets pressurized hot air with less oxygen, reducing power. DOC and DPF (Tier 4i) - requires maintenance. DPF must regenerate, using extra fuel and building heat. EPA Tier III and Tier 4i compliant models. No electronic diagnostics and service. Simple, plain style. Transmission 12x12 power reverser transmission is standard equipment. Electro-hydraulic direction and shuttle capability, mechanical levers for gear selection. Only 4 synchronized gears means the tractor must somehow shift ranges when accelerating to reach transport speeds. This reduces start-up load capacity in heavy-load transport operations. Power shuttle has wet Multi-disc clutch for durability. Convenient left hand shuttle lever near steering wheel. Two right hand shift levers near seat. 3
KEY POINTS COMPARISON Rear Axle Heavy duty solid steel rear axle with flange hub. Internal planetary final drives for exceptional low-end pulling power. Internal wet multi-disc brakes are mechanically actuated for stopping power. Mechanical differential lock operated by foot pedal. 4wd Front Axle Heavy duty solid cast steel front axle can handle heavy loads and support tough loader work. Bevel gear design offers high ground clearance and exceptional steering angle without worrying about universal joints locking up at high angle. Bevel gear housings incorporate planetary reduction gears for low-end torque and durability. Hydraulic steering uses a single double-end cylinder placed behind the axle for protection. 3-point Hitch Category II rear 3-point linkage with position control and top link draft sensing. Electronic operation via hand lever or rotary dial for precise operation. Extendable ball ends for convenient hook-up of implements. Dual turn-buckle adjustments for raising or lowering draft arms for implement connection. 3,417 lbs lift capacity at 24 behind the ball ends. Rear Axle Heavy duty solid steel rear axle with flange hub. Internal planetary final drives for low end torque and pulling power. Internal wet multi-disc brakes are mechanically actuated for stopping power. Mechanical differential lock operated by foot pedal. 4wd Front Axle Heavy solid cast steel front axle to handle heavy loads. Outboard planetary reduction design reduces the ground clearance of the front axle. Reduced steering angles due to U-joint pinch and binding. Outboard planetary units offers low-end torque and durability. Hydraulic steering uses a single double-end cylinder placed behind the axle for protection. 3-point Hitch Category II rear 3-point linkage with position control and top link draft sensing. Mechanical operation via two hand levers to the right side of the operator. Extendable ball ends for convenient hook-up of implements. Single turn-buckle adjustment for raising or lowering draft arms for implement connection. 3,213 lbs lift capacity at 24 behind the ball ends. 4
KEY POINTS COMPARISON Power Take Off 540 and 1000 RPM PTO capability to power a wide range of implements. Both 540 and 1000 RPM (1 3/8 diameter) shafts included with the tractor. Electronic engagement via simple push-button. Hydraulics Open center system with single gear-type pump driven by the engine for constant hydraulic flow to the remote valves and rear 3-point hitch. 17.1 gpm of hydraulic flow for fast hydraulic response and quick loader cycle times. 1 rear remote valves standard on 2wd tractors, and 2 standard on 4wd tractors. Up to 3 remote valves available all models. Mechanical hand levers conveniently located in the right hand console. Factory loader joystick integrated into the right hand console for a clean look. Factory installed mid valves with couplers for simple loader installation and connection. Open Platform Large open station area with folding ROPS and completely flat foot deck with rubber mat. Tilt steering wheel for comfort. Weather-resistant vinyl seat with retractable seatbelt and mechanical spring suspension. Vertical exhaust from the right side of the hood, offset for improved visibility. 27 gallon fuel tank under platform for ground-level fueling. Power Take Off 540 and 540 economy PTO capability means only 540 -type implements can be driven. Only 540 shaft is included with the tractor. Machine cannot support 1000 RPM shaft. Electronic engagement via simple push-button. Hydraulics Open center system with single gear-type pump driven by the engine for constant hydraulic flow to the remote valves and rear 3-point hitch. 15.9 gpm of hydraulic flow for slower hydraulic response and loader cycle times. 2 rear remote valves standard on all tractors. Up to 3 remote valves available all models. Mechanical hand levers conveniently located in the right hand console. Loader joystick is a clumsy, bolt-on design mounted to the side of the operator s area. Factory installed mid valves with couplers for simple loader installation and connection. Open Platform Large open station area with folding ROPS and straddle-mount steel foot deck. Tilt steering wheel for comfort. Weather-resistant vinyl seat with retractable seatbelt and mechanical spring suspension. Vertical exhaust from the left side of the hood, offset for improved visibility. 25 gallon fuel tank behind the operator s seat is difficult to fill. Spilled fuel is hazardous to operator. 5
KEY POINTS COMPARISON Cab 6-post cab structure is spacious and inviting. High position offers exceptional visibility in all directions. Completely flat foot deck with rubber mat. Right and left doors with steps for entry and exit on either side of the tractor. Rear window and corner windows open for ventilation. Front window wiper standard, rear wiper available as field installed. Tilt steering wheel for comfort. Manual adjust HVAC system for a comfortable working environment in all weather conditions. Radio ready with wiring already installed. Adjustable cloth seat with retractable seatbelt and mechanical spring suspension. Front and rear roof-mounted lights for working at night. 27 gallon fuel tank under platform for ground-level fueling. Cab 6-post cab structure is spacious and inviting. High position offers visibility in all directions. Completely flat foot deck with rubber mat. Single door and set of entry/exit steps on the left side of the tractor. Rear window and corner windows open for ventilation. Front window wiper standard, rear wiper available as field installed. Tilt steering wheel for comfort. Manual adjust HVAC system for a comfortable working environment in all weather conditions. Radio ready with wiring and speaks already installed. Adjustable cloth seat with retractable seatbelt and mechanical spring suspension. Front and rear roof-mounted lights for working at night. 30 gallon fuel tank under platform for ground-level fueling. 6
COMPETITIVE SPECIFICATIONS Specifications MF4608 John Deere 5083E Rated Engine HP (kw) 80 (60) 83 (60.5) Rated Engine Speed 2,200 2,400 Max. Engine HP 84 (63) N/A Rated PTO HP 63.5 (47.4) 69 (51.0) Engine Size / # of Cylinders 3.3 L / 3-cylinders 4.5 L / 4-cylinders Aspiration Wastegate Turbocharged and Intercooled Turbocharged EPA Compliance Tier 4i Tier 3 Emissions Control System External EGR, Diesel Oxidation Catalyst None Standard Transmission 12x12 Power Shuttle 12x12 Power Reverser Gears / Ranges 6 Synchronized Gears, 2 Ranges 4 Synchronized Gears / 3 Ranges Optional Transmission None None Gears / Ranges None None Rear Axle Type Solid Cast Steel with Flange Solid Cast Steel with Flange Rear Axle Final Drives Internal Planetary Reduction Internal Planetary Reduction Brakes Internal Hydraulic Wet Disc Internal Hydraulic Wet Disc Diff. Lock Mechanical via Foot Pedal Mechanical via Foot Pedal 4wd Front Axle Type Solid Cast Steel, Center Differential Solid Cast Steel, Center Differential Front Axle Final Drives Combination Bevel Gear and Planetary Outboard Planetary Reduction 3-point Category Cat II Cat II 3-point Control Electronic Mechanical 3-point Lift Capacity lbs (kg) 3,417 (1550) at 24 3,213 (1457) at 24 Hydraulics System Type Open Center Open Center Hydraulic Flow @ Remotes 17.1 gpm (65 Lpm) 15.9 gpm (60.1 Lpm) Rear Remote Valves Up to 3 Up to 3 Factory Loader Ready Optional with Mid Valves and Joystick Optional with Mid Valves and Joystick PTO Speeds 540 and 1000 standard 540 and 540 economy Steering Wheel Tilt Tilt Seat Suspension Mechanical, Adjustable Mechanical, Adjustable Fuel Capacity gal (L) 27 (105) 25 (94.6) ROPS; 30 (113.6) Cab Tractor Length in (mm) 150.2 (3815) 147.6 (3749) Wheelbase in (mm) 88.5 (2250) 85.8 (2178) Height over ROPS in (mm) 109.4 (2779) 99.5 (2527) Height over Cab in (mm) 100.4 (2550) 99.7 (2532) 2wd ROPS Weight lbs (kg) TBA N/A 4wd ROPS Weight lbs (kg) 6,063 (2750) 5,315 (2411) 2wd Cab Weight lbs (kg) TBA N/A 4wd Cab Weight lbs (kg) 6,504 (2950) 7,385 (3350) 7
COMPETITIVE SPECIFICATIONS Specifications MF4608 John Deere 5085E Rated Engine HP (kw) 80 (60) 85 (63.4) Rated Engine Speed 2,200 2,400 Max. Engine HP 84 (63) N/A Rated PTO HP 63.5 (47.4) 70 (52.2) Engine Size / # of Cylinders 3.3 L / 3-cylinders 4.5 L / 4-cylinders Aspiration Wastegate Turbocharged and Intercooled Turbocharged EPA Compliance Tier 4i Tier 4i Emissions Control System External EGR, Diesel Oxidation Catalyst DOC, Diesel Particulate Filter Standard Transmission 12x12 Power Shuttle 12x12 Power Reverser Gears / Ranges 6 Synchronized Gears, 2 Ranges 4 Synchronized Gears / 3 Ranges Optional Transmission None None Gears / Ranges None None Rear Axle Type Solid Cast Steel with Flange Solid Cast Steel with Flange Rear Axle Final Drives Internal Planetary Reduction Internal Planetary Reduction Brakes Internal Hydraulic Wet Disc Internal Hydraulic Wet Disc Diff. Lock Mechanical via Foot Pedal Mechanical via Foot Pedal 4wd Front Axle Type Solid Cast Steel, Center Differential Solid Cast Steel, Center Differential Front Axle Final Drives Combination Bevel Gear and Planetary Outboard Planetary Reduction 3-point Category Cat II Cat II 3-point Control Electronic Mechanical 3-point Lift Capacity lbs (kg) 3,417 (1550) at 24 3,213 (1457) at 24 Hydraulics System Type Open Center Open Center Hydraulic Flow @ Remotes 17.1 gpm (65 Lpm) 15.9 gpm (60.1 Lpm) Rear Remote Valves Up to 3 Up to 3 Factory Loader Ready Optional with Mid Valves and Joystick Optional with Mid Valves and Joystick PTO Speeds 540 and 1000 standard 540 and 540 economy Steering Wheel Tilt Tilt Seat Suspension Mechanical, Adjustable Mechanical, Adjustable Fuel Capacity gal (L) 27 (105) 25 (94.6) ROPS; 30 (113.6) Cab Tractor Length in (mm) 150.2 (3815) 147.6 (3749) Wheelbase in (mm) 88.5 (2250) 85.8 (2178) Height over ROPS in (mm) 109.4 (2779) 99.5 (2527) Height over Cab in (mm) 100.4 (2550) 99.7 (2532) 2wd ROPS Weight lbs (kg) TBA N/A 4wd ROPS Weight lbs (kg) 6,063 (2750) 5,315 (2411) 2wd Cab Weight lbs (kg) TBA N/A 4wd Cab Weight lbs (kg) 6,504 (2950) 7,385 (3350) 8
COMPETITIVE SPECIFICATIONS Specifications MF4609 John Deere 5093E Rated Engine HP (kw) 90 (67) 93 (68.0) Rated Engine Speed 2,200 2,400 Max. Engine HP 95 (71) N/A Rated PTO HP 72 (53.7) 79 (59.0) Engine Size / # of Cylinders 3.3 L / 3-cylinders 4.5 L / 4-cylinders Aspiration Wastegate Turbocharged and Intercooled Turbocharged EPA Compliance Tier 4i Tier 3 Emissions Control System External EGR, Diesel Oxidation Catalyst None Standard Transmission 12x12 Power Shuttle 12x12 Power Reverser Gears / Ranges 6 synchronized gears, 2 ranges 4 Synchronized Gears / 3 Ranges Optional Transmission None None Gears / Ranges None None Rear Axle Type Solid Cast Steel with Flange Solid Cast Steel with Flange Rear Axle Final Drives Internal Planetary Reduction Internal Planetary Reduction Brakes Internal Hydraulic Wet Disc Internal Hydraulic Wet Disc Diff. Lock Mechanical via Foot Pedal Mechanical via Foot Pedal 4wd Front Axle Type Solid Cast Steel, Center Differential Solid Cast Steel, Center Differential Front Axle Final Drives Combination Bevel Gear and Planetary Outboard Planetary Reduction 3-point Category Cat II Cat II 3-point Control Electronic Mechanical 3-point Lift Capacity lbs (kg) 3,417 (1550) at 24 3,213 (1457) at 24 Hydraulics System Type Open Center Open Center Hydraulic Flow @ Remotes 17.1 gpm (65 Lpm) 15.9 gpm (60.1 Lpm) Rear Remote Valves Up to 3 Up to 3 Factory Loader Ready Optional with Mid Valves and Joystick Optional with Mid Valves and Joystick PTO Speeds 540 and 1000 standard 540 and 540 economy Steering Wheel Tilt Tilt Seat Suspension Mechanical, Adjustable Mechanical, Adjustable Fuel Capacity gal (L) 27 (105) 25 (94.6) ROPS; 30 (113.6) Cab Tractor Length in (mm) 152.6 (3875) 147.6 (3749) Wheelbase in (mm) 88.5 (2250) 85.8 (2178) Height over ROPS in (mm) 109.4 (2779) 99.5 (2527) Height over Cab in (mm) 102.4 (2600) 99.7 (32) 2wd ROPS Weight lbs (kg) TBA N/A 4wd ROPS Weight lbs (kg) 6,394 (2900) 5,315 (2411) 2wd Cab Weight lbs (kg) TBA N/A 4wd Cab Weight lbs (kg) 6,835 (3100) 7,385 (3350) 9
COMPETITIVE SPECIFICATIONS Specifications MF4609 John Deere 5100E Rated Engine HP (kw) 90 (67) 100 (74.6) Rated Engine Speed 2,200 2,400 Max. Engine HP 95 (71) N/A Rated PTO HP 72 (53.7) 85 (63.4) Engine Size / # of Cylinders 3.3 L / 3-cylinders 4.5 L / 4-cylinders Aspiration Wastegate Turbocharged and Intercooled Turbocharged EPA Compliance Tier 4i Tier 4i Emissions Control System External EGR, Diesel Oxidation Catalyst DOC, Diesel Particulate Filter Standard Transmission 12x12 Power Shuttle 12x12 Power Reverser Gears / Ranges 6 synchronized gears, 2 ranges 4 Synchronized Gears / 3 Ranges Optional Transmission None None Gears / Ranges None None Rear Axle Type Solid Cast Steel with Flange Solid Cast Steel with Flange Rear Axle Final Drives Internal Planetary Reduction Internal Planetary Reduction Brakes Internal Hydraulic Wet Disc Internal Hydraulic Wet Disc Diff. Lock Mechanical via Foot Pedal Mechanical via Foot Pedal 4wd Front Axle Type Solid Cast Steel, Center Differential Solid Cast Steel, Center Differential Front Axle Final Drives Combination Bevel Gear and Planetary Outboard Planetary Reduction 3-point Category Cat II Cat II 3-point Control Electronic Mechanical 3-point Lift Capacity lbs (kg) 3,417 (1550) at 24 3,213 (1457) at 24 Hydraulics System Type Open Center Open Center Hydraulic Flow @ Remotes 17.1 gpm (65 Lpm) 15.9 gpm (60.1 Lpm) Rear Remote Valves Up to 3 Up to 3 Factory Loader Ready Optional with Mid Valves and Joystick Optional with Mid Valves and Joystick PTO Speeds 540 and 1000 standard 540 and 540 economy Steering Wheel Tilt Tilt Seat Suspension Mechanical, Adjustable Mechanical, Adjustable Fuel Capacity gal (L) 27 (105) 25 (94.6) ROPS; 30 (113.6) Cab Tractor Length in (mm) 152.6 (3875) 147.6 (3749) Wheelbase in (mm) 88.5 (2250) 85.8 (2178) Height over ROPS in (mm) 109.4 (2779) 99.5 (2527) Height over Cab in (mm) 102.4 (2600) 99.7 (32) 2wd ROPS Weight lbs (kg) TBA N/A 4wd ROPS Weight lbs (kg) 6,394 (2900) 5,315 (2411) 2wd Cab Weight lbs (kg) TBA N/A 4wd Cab Weight lbs (kg) 6,835 (3100) 7,385 (3350) 10
COMPETITIVE SPECIFICATIONS Specifications MF4610 John Deere 5101E Rated Engine HP (kw) 99 (74) 101 (74.1) Rated Engine Speed 2,200 2,400 Max. Engine HP 100 (75) N/A Rated PTO HP 80 (59.7) 86 (64.0) Engine Size / # of Cylinders 3.3 L / 3-cylinders 4.5 L / 4-cylinders Aspiration Wastegate Turbocharged and Intercooled Turbocharged EPA Compliance Tier 4i Tier 3 Emissions Control System External EGR, Diesel Oxidation Catalyst None Standard Transmission 12x12 Power Shuttle 12x12 Power Reverser Gears / Ranges 6 synchronized gears, 2 ranges 4 Synchronized Gears / 3 Ranges Optional Transmission None None Gears / Ranges None None Rear Axle Type Solid Cast Steel with Flange Solid Cast Steel with Flange Rear Axle Final Drives Internal Planetary Reduction Internal Planetary Reduction Brakes Internal Hydraulic Wet Disc Internal Hydraulic Wet Disc Diff. Lock Mechanical via Foot Pedal Mechanical via Foot Pedal 4wd Front Axle Type Solid Cast Steel, Center Differential Solid Cast Steel, Center Differential Front Axle Final Drives Combination Bevel Gear and Planetary Outboard Planetary Reduction 3-point Category Cat II Cat II 3-point Control Electronic Mechanical 3-point Lift Capacity lbs (kg) 3,417 (1550) @ 24 3,213 (1457) at 24 Hydraulics System Type Open Center Open Center Hydraulic Flow @ Remotes 17.1 gpm (65 Lpm) 15.9 gpm (60.1 Lpm) Rear Remote Valves Up to 3 Up to 3 Factory Loader Ready Optional with Mid Valves and Joystick Optional with Mid Valves and Joystick PTO Speeds 540 and 1000 standard 540 and 540 economy Steering Wheel Tilt Tilt Seat Suspension Mechanical, Adjustable Mechanical, Adjustable Fuel Capacity gal (L) 27 (105) 25 (94.6) ROPS; 30 (113.6) Cab Tractor Length in (mm) 152.6 (3875) 147.6 (3749) Wheelbase in (mm) 88.5 (2250) 85.8 (2178) Height over ROPS in (mm) 109.4 (2779) 99.5 (2527) Height over Cab in (mm) 102.4 (2600) 99.7 (32) 2wd ROPS Weight lbs (kg) TBA N/A 4wd ROPS Weight lbs (kg) 6,503 (2950) 5,315 (2411) 2wd Cab Weight lbs (kg) TBA N/A 4wd Cab Weight lbs (kg) 6,945 (3150) 7,385 (3350) 11
COMPETITIVE SPECIFICATIONS Specifications MF DL250 Loader MF DL260 Loader JD 553 Loader JD H260 Loader Tractor Compatibility MF4608 4609, 4610 5083E, 5093E, 5101E 5083E, 5093E, 5101E Max. Lift Capacity @ Pivot Pins lbs (kg) 3,250 (1474) 3,625 (1644) 3,133 (1421) 3,879 (1763) Max. Lift Capacity @ 31 Forward lbs (kg) 1,990 (903) 2,536 (1150) 1,956 (887) 2,666 (1212) Max. Lift Height @ Pivot Pins In (mm) 123 (3124) 128 (3251) 122 (3099) 137 (3482) Max. Breakout Force @ 31 Forward lbs (kg) 3,075 (1395) 3,540 (1606) 3,604 (1635) 4,756 (2162) Rated Hydraulic Pressure 2,800 psi 2800 psi 2900 psi 2900 psi NOTES 12