Slab Riders Quick-Release Bit Guide ease in changing bits & drill steel Oil Injection individual oiling from a single reservoir extends drill life and reduces downtime Hole Spacing Guide ensures quick re-positioning Model 210-4 SRA Automatic Drill Shutoffs extends drill life & reduces downtime Patented Roller Bearing Feed for friction free drilling 2
Model 210-3 SRA Model 210-4 SRA Model 210-4 SRA Model 210-5 SRA Slab Riders with optional On-Grade Conversion Kit with optional Tow Bar Package Standard Features of the 210-3, 210-4 & 210-5 SRA s Self-propelled - powerful enough to tow the air compressor Multi-point oil injection - provides individual oiling from a single reservoir Automatic drill shut offs - extends drill life; reduces downtime Totally pneumatic - requires a minimum of 100 cfm (PER DRILL) Standard drill depth - operates in a 4 patch and drills within of a corner Adjustable spacing - up to 3 or more Easily adjusted to drill into the center of a 24 slab Patented tri-steering feature - allows one operator to maneuver unit with ease Internal regulator - protects drill motors from high pressure Optional tow bar kit - attaches the air compressor to the drill Optional on-grade conversion kit - unit is more versatile; fits more applications All slab-riders can drill vertically and can be adjusted to drill at angles Standard skew feature on all Model 210B SRA s Optional on all other Slab-Rider Models Model 210B-2 SRA Standard drill depth - fits in a 4 patch and drills within of a corner. Adjustable spacing - up to 3 or more Totally pneumatic - requires a minimum of 200 cfm Oil injection - individual oiling from a single reservoir Optional on-grade conversion kit - provides greater versatility Patented tri-steering feature - allows one operator to maneuver with ease Includes 25 of 1 1/4 Air Hose Model 210B SRA Totally pneumatic - requires a minimum of 100 cfm Production and speed - can drill 1 5/8 diameter hole 9 deep in approximately 25 seconds Standard drill depth - fits in a 4 patch and drills within of a corner Adjustable to drill into center of concrete slab - from to 24 thick concrete 3
On-Grade Models Model 5B Smallest E-Z Drill available - fits in a 2 patch and drills up to 8 deep Also available in a 1 drill depth Totally pneumatic - requires a minimum of 20 cfm Drills from 1/ to 7/8 diameter holes Vertical conversion kit available Model 85B A small drill system with a heavy duty drill Totally pneumatic - requires only 32cfm of air Fits in a 30 patch - drills up to 9 deep with 1 UC bit Drills from 5/8 to diameter holes Optional mobile system available Vertical conversion kit available Model 110B Downsized version of the Model 210B - designed to fit in 3 patches Totally pneumatic - requires a minimum of 50 cfm Standard 1 drill depth Includes mobile system - for easy positioning Drills from 5/8 to diameter holes Vertical conversion kit available Model 210B-2 Totally pneumatic - requires a minimum of 200 cfm Inexpensive multi-gang system - ideal for lane additions, airport work, and other straight line on-grade applications Standard drill depth Mobile system included - can be configured to fit in a 4 area Dual Purpose Guide Wheels can also be used as transport wheels - easily moved by one person Model 210B Totally pneumatic - requires a minimum of 100 cfm Standard drill depth - fits in a 4 patch and drills within of a corner Includes mobile system - for easy positioning Production and speed - can drill a diameter hole 9 deep in approximately 15 seconds Vertical conversion kit available 4
Model 210-3 EQ MT Model 210-5 EQ MT Model 210-5 EQ MT Model 210 Twin Vertical Standard Features of the 210-3, 210-4 & 210-5 EQ MT Totally pneumatic - requires a minimum of 100 cfm (PER DRILL) Available with up to six drills Standard side shift feature - drill two sets of holes without repositioning the carrier Multi-point oil injection - individual oiling from a single reservoir Balanced frame and mounting system - fits most backhoes, excavators, etc. Internal regulator - protects drill motors from high pressure Safety swivel lock - safer during transport Automatic drill shut offs - extends drill life; reduces downtime Extra height adjustment - for extreme overlay conditions Swivel mounting - drill unit can swivel 30º Optional air tank - can be used with a much smaller air compressor to provide sufficient air to the drills with Air Tank Floating Bucket Curl Pin for fast repositioning Skid loader or wheel loader quick attachment Totally pneumatic - requires a minimum of 20 cfm Heavy duty 50 lb. class rock drill - 1 x 4 1/4 chuck (standard) Standard 17 drill depth Adjustable drill centers - from 5 to 10 Air operated remote controls - does not require any electrical or hydraulic hook up Versatile - ideal for slab jacking, mud jacking, or drilling straight or angled holes for pulling patches, etc. Equipment Mounted Easy to use Operator Control Panel finger tip controls Automatic Safety Swivel Lock keeps drill in locked position while transporting Model 210-4 EQ MT 5
Special Design Models to Fit Any Drilling Application Model 20 UTL The Model 20 UTL is a single vertical drill system designed for gas utility companies to drill through streets to pinpoint gas leaks, but can be used for most any vertical drilling application. It is lightweight and includes wheels for easy maneuverability and allows for one person to load and unload the unit. It requires a minimum of 100 cfm of air, and has an standard drill depth. Air Motor/Gear Box Drill Designed for drilling up to ʼ deep. Custom designed to fit any application Model 110-3 SL This unit can drill off of either side, or off the front using automatic swivel; includes remote controls. Availiable from 2 - drills Extended Vertical System Shown on a special cart, designed for drilling straight up; with vacuum attachment Model 210B Shown with special mounting on a man lift for drilling horizontally into bridge deck Model 210B SRA w/ Modified Mast Used for drilling into the top of a parapet wall 4-Gang Core Drill System Shown mounted on a parapet wall for drilling into concrete and rebar Deeper drill depths are available. 54 drill depth shown above.
Vertical Conversion Kits Accessories and Other Products Model 210B with Vertical Conversion Kit E-Z Drill Trailer For hauling one Model 210B-2 SRA, or any two single models. Includes a winch for easier loading. Also includes ramps, ball hitch, 13 wheels and a light kit. Cure Trailer Sprayer Heavy duty design for a wide variety of concrete cures. Self loading, pump the cure directly from the barrel into the tank. Includes 5hp Honda engine and Roper pump; 40ʼ of 1/ sprayer hose. Pin-Puller Our custom designed pin-puller attaches to a lifting device to pull paving form or string line pins safely and quickly. E-Z Drill Pin-Pullers result in reduced labor costs and the risk of injuries. Model 5B with Vertical Conversion Kit Vacuum Systems Our vacuum systems are available to fit any E-Z Drill system; includes vacuum, hoses and adapter. Totally pneumatic - operates from the same air compressor as the drill unit. Rock Drill Oil Recommended for all E-Z Drill models. Available in 1-gallon and 5-gallon containers. E-Z Drill stocks a complete line of drill bits and drill steel 7
Specifications for Standard Models - variations available upon request Model 5B 85B 110B 210B 210B-2* 210B SRA 210B-2 SRA 210-3 SRA 210-4 SRA 210-5 SRA 210-3 EQ MT 210-4 EQ MT 210-5 EQ MT 210- EQ MT Min Patch Size 1 (cm) 24 & 30 (0.9 & 7.2) 30 (7.2) 3 (91.4) 20 UTL N/A 210 TWIN VERTICAL N/A Drill Depth 2 (cm) 8 & 12 (20.3 & 30.5) 9 (22.9) 12 (30.5) Hole Dia. (mm) 1/2-7/8 (12.7-22.2) 5/8-2 (15.9-50.8) 5/8-2 (15.9-50.8) (15.9-3.5) (15.9-3.5) (15.9-3.5) (15.9-3.5) (15.9-3.5) (15.9-3.5) (15.9-3.5) (15.9-3.5) (15.9-3.5) (15.9-3.5) (15.9-3.5) (15.9-3.5) 3/4-2 1/2 (19.0-3.5) Drill Dist. From Corner (cm) N/A N/A Air Req. cfm (m3) 20 (0.5) 32 (0.90) 50 (1.40) 100 (2.80) 200 (5.0) 100 (2.80) 200 (5.0) 300 (8.40) 400 (11.20) 500 (14.00) 300 (8.40) 400 (11.20) 500 (14.00) 00 (17.00) 100 (2.80) 20 (7.28) Hose Size - (ID) 3 (mm) 1 1/4 (31.8) 1 1/4 (31.8) 1 1/2 - (38.1-50.8) 1 1/2 - (38.1-50.8) 1 1/4 (31.8) Drill Motor CP 9C CP 14 CP 22 CP 9 Chuck Size (mm) 3/4 RD X 3-3/4 (19.0 X 95.2) (22.2 X 82.) (22.2 X 82.) (22.2 X 82.) (22.2 X 82.) (22.2 X 82.) (22.2 X 82.) (22.2 X 82.) (22.2 X 82.) (22.2 X 82.) (22.2 X 82.) (22.2 X 82.) (22.2 X 82.) (22.2 X 82.) (22.2 X 82.) 1 X 4-1/4 (25.4 X 107.9) Weight lb. (kg) 5 (29.5) 85 (38.) 170 (77.2) 230 (104.4) 710 (322.3) 385 (174.8) 1040 (404.1) 2000 (908.0) 2200 (988.8) 2400 (1089.) 1400 (35.) 1700 (771.8) 1900 (82.) 2100 (953.4) 207 (94.0) 930 (422.2) 1. Minimum patch size is the smallest area the unit will fit in and drill the depth listed 2. Drill depths given are standard - other drill depths available upon request 3. All sizes shown are for 25ʼ of hose or less * Back wheels must be configured in order to fit in a area E-Z Drill, Inc. Stillwater, Oklahoma International: 405-372-0121 Toll Free: 800-272-0121 E-Mail: sales@ezdrill.com Fax: 405-372-1429 07/03