Poly-Stainless MP+3 Multi-Purpose Applicator Fertilize, seed or apply granular chemicals with just one applicator. Comes with three sets of Full-Rate metering wheels. Standard Equipment: 2.3 cu.ft (140 lb capacity for fertilizer at 60 lb per cu ft density /100 lbs capacity for seed and chemical) polyethylene hopper with stainless steel housing to resist corrosion. Includes u-frame mount with 1/2 pre-drilled holes and slots for mounting. Includes four full-rate black metering wheels for small seeds like alfalfa, canola and granular chemicals: four re metering wheels for small grains such as oats, wheat, rice, barley and fertilizer; four yellow hi-output fertilizer metering wheels. Operator can install from one to four outlets on a single applicator depending upon field requirements. Note: for chemical and fertilizer applications requiring less that 4 lb./acre, customer will need to order half-rate metering wheels. Product is fed under the metering wheel to dispense particles down the tube. Positive shutoff when metering stops. Speed compensated rate if ground driven Gandy ground drive or a user-made sprocket and chain drive from a parent implement shaft. Sprocket cluster package, ordered separately, sets the rates and can control several hoppers set up in line through the use of connector tubes Requires 1.5 ID tubing with hose clamps to secure tubing to outlet. 7/8 tubing with hose clamps are required when spout adapters are used. Order separately as needed. SPECIFICATIONS: Neutral polyethylene hopper, heat reflective silver lid with strap latches, positive displacement applicator assembly. Includes red (F) fertilizer, black (C) chemical and yellow (V) hi-output fertilizer metering wheels with open stainless steel housing and see-through weather-guard shield. U-frame mounting bracket with 1/2 holes and slots included. Internal agitator standard. EXTRA EQUIPMENT: Rate control sprocket package, drop tubing, hose clamps ordered separately. Purchaser will have to provide chain and drive sprocket to hopper input shaft from the parent implement s live shaft to provide 2 or 4 rpm in 88ft ground travel to the Gandy input shaft depending on chemical rate, or purchase the Gandy ground drive package OPTIONS: Agitator that secures to internal drive shaft is standard equipment; however, if multiple hoppers are mounted in line, connector tubes will be needed to connect each hopper s drive and agitator shafts. Number of in-line hoppers possible will depend on torque created by product being applied. WEIGHT 39 lbs 1,087.00 8 1,080.00 1. CHOOSE AN APPLICATOR PACKAGE 09PDMS Multi-Purpose poly stainless applicator with four black metering wheels for small seeds & granular chemicals; four red metering wheels for small grains and fertilizer, four yellow hi-output fertilizer metering wheels. Includes four spout adapters for use with granular chemical U-frame mounted bracket with 1/2 pre-drilled holes and slots for mounting and internal agitators. Operators can configure applicator from one to four outlets. Blank plates included to block off unused outlets. Non-speed compensated electric drive available Factory rate charts are based on a drive input to the hopper shaft of 2 or 4 revolutions in 88 feet provided by 2. CHOOSE A GROUND OR ELECTRIC DRIVE PACKAGE BELOW 9094903 9099934 9004956 Speed-compensated ground drive package with 480/400x8, 4-ply tire. Attaches to diamond or flat tool bar, includes drive sprockets and chain. 12-volt, 4 amp, 1/64 hp electric motor with on/off switch, drive sprockets, chain and guard. Drives up to two hoppers 12-volt, 25 amp, 1/4 hp heavy-duty electric motor complete with on/off switch, drive sprockets, chain and guard. Drives up to eight hoppers. 419.00 1,534.00
Poly-Stainless MP+3 Multi-Purpose Applicator WEIGHT 3. RATE CONTROL SPROCKET PACKAGE 9099930 Set of 12 sprockets to regulate application rates when electric or ground drive is chosen. Includes sprockets, stub connector, chain and guard. 6 lbs 258.00 per foot price 4.00 2.00 5.00 2.00 93.00 4 lbs 108.00 39.00 23.00 4. SELECT TUBING M06-1500-010 1-1/2 I.D clear flexible tubing. Order in foot lengths. M11-0024-000 Hose Clamp, 1-2 M06-0875-000 per foot price M11-0012-010 Hose Clamp, 5/8-1 1/4. For use with 7/8 ID tubing 5. OPTIONAL CONNECTOR PKG s WHEN MOUNTING MULTIPLE HOPPERS IN-LINE 9074321 9074323 Connector drive tube used to connect metering shaft or drive shaft in line, up to 42 spacing. Note: If agitators used, separate connector drive tubes will be needed to connect the drive shafts and agitator shafts. Connector drive tube, used to connect metering shaft or drive shat in line, up to 80 spacing. Note: If agitators used, separate connector drive tubes will be needed to connect the drive shafts and agitator shafts. 7. FIELD INSTALLED OPTIONS AND WEAR S 9099931 Agitator package, 2 piece, option for all 2.3 cubic foot top feed PDA hoppers. 62851-75 Black C full0rate wheel with cavity inserts to be used for granular chemicals and small seed. Order number required M10-0001-020 Replacement full-rate black C wheel - does not included cavity inserts. Order number required. 12.00 9096918 Electric clutch package to provide shutoff on existing installations. 438.00 9099946 Latch package for poly hopper lid (replacement) 6 oz 51.00 M05-0000-008 Rubber replacement latch only, 4 24.00 09094899-9 Adapter to insert into metering cup to accept.875 tubing 7.00 C08-0138-030 #6-32 sheet metal screw 1.00 7/8 I.D. clear flexible tubing. Order in foot lengths. For use with hopper when seeding or applying low rates of granular chemicals and requires smaller tube for opener placement. Note: this tubing is used with spout adapter, no. 09094899-9 for granular chemical applications.
2.3 cu ft capacity poly hoppers OPTIONAL Lock n Load lid available U-frame bracket included with holes and slots for mounting 2, 3 or 4 openings per hopper WEIGHT 1. SELECT A 100 LB CAP. POLY CAM-GAUGE APPLICATOR PKG WITH RUBBER ROTOR BAR, HOSES, HOSE CLAMPS, STABILIZERS AND CLAMP STRAPS 09PC02EM-R 100 lb row crop applicator pkg consisting of hopper with two outlets, twin rubber rotor bar, U frame mounting brackets, two 42 flexible tubes, hose clamps, stabilizers and clamp straps. 29 lbs 909.00 09PC03EM-R 100 lb row crop applicator pkg consisting of hopper with three outlets, twin rubber rotor bar, U frame mounting brackets, two 42 flexible tubes, hose clamps, stabilizers and clamp straps. 31 lbs 941.00 09PC04EM-R 100 lb row crop applicator pkg consisting of hopper with four outlets, twin rubber rotor bar, U frame mounting brackets, two 42 flexible tubes, hose clamps, stabilizers and clamp straps. 3 977.00 2. OPTIONAL GROUND OR ELECTRIC DRIVE PACKAGES 09069286-C1 Ground-drive, non-speed compensating with steel wheel. Attaches to diamond or flat tool bar. Comes with driven sprocket and chan. 69 lbs 1,090.00 09069286R-C1 Ground-drive, non-speed compensating with rubber wheel. Attaches to diamond or flat tool bar. Comes with driven sprocket and chan. 5 1,081.00 9099928 12-volt, 1/64 hp motor with mounting, motor, chain, guard. May drive up to 2 hoppers 434.00 9099929 12-volt, 1/32 hp motor with mounting, motor, chain, guard. May drive up to 3 hoppers 622.00 Lock N Load lid in lieu of standard lid. Deduct M10-0001-115 from above package, and add price to whole goods price. 32.00 Lock N Load valve for attachments to Lock N Load Lid. 124.00 SPECIFICATIONS: 100 lb (46 kg) capacity low density polyethylene hopper (approximate, with clay ag chemical granules at 45 lb per cu ft), with bolt-on stainless steel hopper bottom and slide; bolt-n mounting for easy removal; precision cam-type rate gauge; five-bladed Flo-Control rotor; sealed bearings. Color, natural, with silver lid and latch straps. Note: this bottom & slide is not interchangeable with the snap-on bottom & slide used with steel hoppers. Uframe mounting bracket with 1/2 holes and slots included. 3. OPTIONAL LOCK N LOAD COVER M10-0002-116 09LLV 4. OPTIONAL CONNECTOR PACKAGES WHEN MOUNTING MULTIPLE HOPPERS IN-LINE 9074321 Connector drive tube for hoppers spaced up to 42 apart 93.00 9074323 Connector drive tube for hoppers spaced up to 80 apart 108.00
POLY HOPPER WITH CAM GAUGE FOR INSECTICIDES & HERBICIDES WEIGHT 5. OPTIONAL TUBING AND RO-BANDERS M06-0875-000.875 inch ID clear flexible tubing. Order by the foot. 5.00 2406224-36.810 inch ID clear tubing - 36 length (available in lengths up to 108 ) Per Foot 14.00 M11-0012-010 Mini-hose clamp, 5/8 x 1 1/4 (secures tube to spout) 2.00 5 ro-bander 42.00 09107D 7 ro-bander 39.00 09110D 10 ro-bander 47.00 14 ro-bander (comes with mounting brackets) 90.00 Attaching bracket for single ro-bander to tool bar 79.00 14 lbs 184.00 9114 9073673 6. FIELD INSTALLED MOUNTING OPTIONS 09073649EMS Adjustable tol bar mount (12-24 ) fits up to a 5 diamond or 7 square tool bar 09105D
JUMBO PDM ROW APPLICATOR PKG WITH FULL-RATE CHEMICAL WHEEL Positive Displacement Packages for Pesticides Steel PDM hoppers provide positive displacement metering and rate control by sprocket SPECIFICATIONS: Steel hopper, PDM metering bottom, full-rate black ( C) chemical metering wheels, metering cups, full length and half slide closures. U-frame bracket with 1/2 holes and slots for mounting. Order separately: Rate control sprocket package, drop tubing, hose clamps. USER FABRICATED GROUND-DRIVE: Will have to provide chain and drive sprocket to hopper input shaft from the parent implement s live shaft to provide 2 or 4 rpm to the Gandy input shaft depending on chemical rate, or purchase the Gandy ground drive package. OPTIONS: Lock n Load lid and valves. Agitators that pin to internal drive shafts are available for materials which do not flow well. Order according to number of outlets. If multiple hoppers are mounted in line, connector tubes will be needed to connect each hopper s drive. WEIGHT 1. SELECT A FULL-RATE JUMBO PDM APPLICATOR (approximately 45 lb capacity) 09M4PDM Jumbo hopper, 4-outlet PDM bottom, full-rate black ( C) chemical metering wheel in place. Includes slide closures to block off unused outlets 36 lbs 657.00 258.00 379.00 8 1,080.00 11 lbs 207.00-10.00 2. SELECT A RATE CONTROL SPROCKET 9095917 Set of 12 sprockets to regulate application rates on Gandy PDM systems for ground drive, electric motor drive or hydraulic motor drive. Includes stub connector, chain and guard. cluster Absolute shutoff when metering stops and, if ground driven, compensates for changes in field speeds Feeds material under the metering wheel, down delivery tube Includes slide closures to block off unused outlets Factory rate charts based on input to the hopper shaft of 2 or 4 revolutions in 88 feet either from a Gandy ground drive or a sprocket and chain drive from the parent implement s live shaft Electric, not speed compensating and speed-compensated ground drive available Sprocket cluster package, ordered separately, used to set the rates, can control several hoppers connected in line PDM metering available as attachments to convert Gandy hoppers with cam gauge You must have a rate control sprocket set in order to adjust application rates for your individual applicator. If you are mounting multiple hoppers in-line, you only need one (!) rate control sprocket set. If you are ordering multiple hoppers and they cannot be placed in-line, you will need to order a rate control sprocket set for each individual applicator. 3. OPTIONAL ELECTRIC OR GROUND DRIVE PACKAGES 9094907 9094903 12-volt electric motor drive, complete with switch, drive sprocket, chain and guard. 4 amp 1/64 hp to drive up to tow hoppers. Other motors will deliver different rpm s and not follow calibration rate guides ( Non-speed compensated electric motor drive pkg) Ground drive with 480-8 tire. Attaches to diamond or flat tool bar, includes drive sprockets and chain. (speed-compensated ground drive pkg) 4. OPTIONAL HOPPER EXTENSION 9176744 Hopper extension for Jumbo applicator to add 4 additional capacity If ordered as original equipment, deduct price of 09173668/40 lid from hopper pkg.
JUMBO PDM ROW APPLICATOR PKG WITH FULL-RATE CHEMICAL WHEEL 5. OPTIONAL LOCK N LOAD COVER LL 09LLV By adding the letters LL to the end of the any model row hopper, the hopper will have the lid die cut to accept a Lock N Load valve. Add amount to the price in price list. 28.00 Lock N Load valve for attachment to row applicator 124.00 9074321 6. OPTIONAL CONNECTOR PACKAGES WHEN MOUNTING MULTIPLE HOPPERS INLINE Connector drive tube for hoppers spaced up to 42 apart 93.00 9074323 Connector drive tube for hoppers spaced up to 80 apart 108.00 5.00 2406224-36.810 inch ID clear tubing 36 length (available in lengths up to 108 inches) 14.00 M11-0012-010 Mini-hose clamp, 5/8 x 1 1/4 (secures tube to spout) 2.00 09105D 5 ro-bander 42.00 09107D 7 ro-bander 39.00 09110D 10 ro-bander 47.00 14 ro-bander (comes with mounting brackets) 90.00 Attaching bracket for single ro-bander to tool bar 79.00 14 lbs 184.00 09094901-1 Agitator for 1-outlet PDM applicator 62.00 09094901-2 Agitator for 2-outlet PDM applicator 71.00 09094901-3 Agitator for 3-outlet PDM applicator 69.00 09094901-4 Agitator for 4-outlet PDM applicator 79.00 9114 9073673 8. FIELD INSTALLED MOUNTING OPTIONS 09073649EMS Adjustable tool bar mount (14 to 24 fiits up to 5 diamond or 7 square tool bar 9. FIELD INSTALLED OPTIONS 09MPDM-1 1-outlet PDM replacement bottom, Jumbo, full-rate chemical wheel in place 332.00 09MPDM-2 2-outlet PDM replacement bottom, Jumbo, full-rate chemical wheel in place 374.00 09MPDM-3 3-outlet PDM replacement bottom, Jumbo, full-rate chemical wheel in place 415.00 09MPDM-4 4-outlet PDM replacement bottom, Jumbo, full-rate chemical wheel in place 465.00 9096918 Electric clutch package to provide shutoff on existing PDM installations 538.00 9094906 Conversion pkg to mount existing 1/64 hp 12-volt electric motor to right side of hopper so PDM metering wheels rotate in underfed direction. Electric motor drive is not speedcompensated. Package includes chain guard, 36 T sprocket and 48-link #41 chain. Note: if high rates of certain chemicals are required, you may need to substitute the 32T sprocket in existing 1/64 hp 12V motor pkg #09075589, or order 32T sprocket #0907158916 separately. Check rate chart for sprocket used. 89.00 7. OPTIONAL TUBING AND RO-BANDERS M06-0875-000.875 inch ID clear flexible tubing. Order by the foot.
JUMBO PDM ROW APPLICATOR PKG WITH FULL-RATE CHEMICAL WHEEL 9. FIELD INSTALLED OPTIONS 4 oz 68.00 M10-0001-022.230 black metering wheel used for low alfalfa rates. Order two.50 spacers per wheel 3 oz 20.00 62851-40.50 spacer. Order two spacers per outlet using.230 seed wheel (alfalfa) 6 oz 39.00 9096921 Package of half-rate chemical ( C) metering wheel and two spacers for 1 1/4 outlet 4 lbs 49.00 4 lbs 57.00 Hopper lid lock package for attachment to existing Super or Jumbo applicator 8 oz 40.00 Jumbo hopper lid and hinge only, opening for one Lock N Load valve 4 lbs 73.00 Suspender for placement inside hopper to keep granules suspended and create even flow of materials around rotor bar 35.00 09072654-3 U-frame lid lock package for attachment to existing Super of Jumbo applicator 9078765 09MLL 9178768 09096921R Half-rate red (F) wheel with two spacers for seeds at high rates. Order number required
JUMBO PDM ROW APPLICATOR PKG WITH HALF-RATE CHEMICAL WHEEL Positive Displacement Packages for Pesticides Half-rate ( C) chemical wheel installed for low application rates for pesticides Available with up to four outlets Includes shutoff slides to individually close unused outlets U-frame mounting bracket included Jumbo applicator with approximately 4 capacity SPECIFICATIONS: Steel hopper, PDM metering bottom; package suffix of T indicates half rate black ( C) chemical metering wheels and spacers in place, metering cups, full length and half slide closures. Rate chart included. OPTIONS: Agitators that pin to internal drive shafts are available for materials that do not flow well. Order according to number of outlets. If multiple hoppers are mounted in line, connector tubes will be needed to connect each hopper s drive. A stub shaft connector will be needed for connection to the parent hopper. 1. SELECT A HALF-RATE JUMBO PDM INDIVIDUAL APPLICATOR OR PACKAGE 09M4PDM-T Jumbo hopper, 4-outlet PDM bottom, half-rate black ( C) chemical wheel in place. Includes slide closures to block off unused outlets. 820.00 258.00 379.00 8 1,080.00 1 207.00-10.00 By adding the letters LL to the end of any model row hopper, the hopper will have the lid die cut to accept a Lock N Load valve. Add amount to price in the price list 28.00 Lock N Load valve for attachment to row applicator 124.00 2. SELECT A RATE CONTROL SPROCKET 9095917 Set of 12 sprockets to regulate application rates on Gandy PDM systems for ground drive, electric motor drive, or hydraulic motor drive; stub connector, chain and guard included. You must have a rate control sprocket set in order to adjust application rates for your individual applicator. If you are mounting multiple hoppers in-line, you only need one (!) rate control sprocket set. If you are ordering multiple hoppers and they cannot be placed in-line, you will need to order a rate control sprocket set for each individual applicator. 3. CHOOSE A DRIVE PACKAGE 9094907 12-volt electric motor drive, complete with switch, drive sprockets, chain and guard. 4 amp 1/64 hp to drive up to two hoppers. Other motors will deliver different rpm s and not follow calibration rate guides. 9094903 Ground drive package with 480-8 tire. Attaches to diamond or flat tool bar, includes drive sprockets and chain. EXTRA EQUIPMENT: Purchaser will have to provide chain and drive sprocket to hopper input shaft from the parent implement s live shaft to provide 2 or 4 rpm to the Gandy input shaft, or purchase the Gandy ground drive package. U-frame is included in Jumbo packages. If existing hopper is equipped with standard 1 1/4 black ( C) chemical wheels, half rate chemical wheels and spacers can be ordered per outlet as package 09096921. 4. OPTIONAL HOPPER EXTENSION 9176744 Hopper extension for Jumbo applicator to add 4 of additional capacity If ordered as original equipment, deduct price of 09173668/40 lid from hopper package 5. OPTIONAL LOCK N LOAD COVER LL 09LLV
JUMBO PDM ROW APPLICATOR PKG WITH HALF-RATE CHEMICAL WHEEL 6. OPTIONAL CONNECTOR PACKAGES WHEN MOUNTING MULTIPLE HOPPERS INLINE 9074321 Connector drive tube for hoppers spaced up to 42 apart. 93.00 9074323 Connector drive tube for hoppers spaced up to 80 apart 108.00 7. OPTIONAL TUBING AND RO-BANDERS M06-0875-000.875 inch ID clear flexible tubing. Order by the foot. 5.00 2406224-36.810 inch ID clear tubing 36 length (available up to 108 ) 14.00 M11-0012-010 Mini-hose clamp, 5/8 x 1 1/4. (secures tube to spout) 2.00 5 ro-bander 42.00 09107D 7 ro-bander 39.00 09110D 10 ro-bander 47.00 9114 14 ro-bander 90.00 Attaching bracket for single ro-bander to tool bar 79.00 14 lbs 184.00 09094901-1 Agitator for 1-outlet Jumbo, Super or Junior PDM applicator 62.00 09094901-2 Agitator for 2-outlet Jumbo, Super or Junior PDM applicator 71.00 09094901-3 Agitator for 3-outlet Jumbo, Super or Junior PDM applicator 69.00 09094901-4 Agitator for 4-outlet Jumbo, Super or Junior PDM applicator 9073673 8. FIELD INSTALLED MOUNTING OPTIONS 09073649EMS Adjustable tool bar mount (14 to 24 ) fits up to 5 diamond or 7 square tool bar 9. FIELD INSTALLED OPTIONS 79.00 09MPDM-1T 1-outlet PDM replacement bottom, Jumbo hopper, half-rate chemical wheel in place 397.00 09MPDM-2T 2-outlet PDM replacement bottom, Jumbo hopper, half-rate chemical wheel in place 465.00 09MPDM-3T 3-outlet PDM replacement bottom, Jumbo hopper, half-rate chemical wheel in place 612.00 09MPDM-4T 4-outlet PDM replacement bottom, Jumbo hopper, half-rate chemical wheel in place 637.00 9096918 Electric clutch package to provide shutoff on existing PDM installations 538.00 9094906 Conversion package to mount existing 1/64 hp 12-volt electric motor to right side of hopper so PDM metering wheels rotate in underfed direction. Electric motor drive is not speed-compensating. Package includes chain guard, 36-T sprocket and 49-link, #41 chain. Note: if high rates of certain chemicals are required, you may need to substitute the 32T sprocket in existing 1/64 hp 12V motor package #09075589, or order 32T sprocket #09071589-16 separately. Check rate chart for sprocket used. 89.00 4 oz 68.00 3 oz 20.00 6 oz 39.00 49.00 09096921R Half-rate red (F) wheel with two spacers for seeds at high rates. Order number required M10-00001-022.230 black metering wheel used for low alfalfa rates. Order two.50 spacers per wheel 62851-40.50 spacers. Order tow spacers per outlet using.230 seed wheel (alfalfa) 9096921 Package of half-rate chemical ( C) metering wheel and tow spacers for 1 1/4 outlet 09072654-3 U-frame replacement for Jumbo applicators 9078765 09MLL 9178768 4 lbs 57.00 Hopper lid lock package for attachment to existing Super or Jumbo applicator 8 oz 40.00 Jumbo hopper lid and hinge only, opening for one Lock N Load valve 4 lbs 73.00 Suspender for placement inside hipper to keep granules suspended and create even flow of materials around rotor bar. 35.00 09105D
JUMBO INDIVIDUAL CAM-GAUGE APPLICATORS AND PACKAGES Cam Gauge Metering of Herbicides and insecticides 45 lb capacity of granular chemicals at density of 45 lb/cu. ft. Choice of 2, 3 or 4 openings per hopper Hopper lid measures 13 1/2 x 12 3/4 (Lock n Load Lids Available) Rubber rotor bar U-frame mounting bracket with 1/2 pre-drilled holes and slots for mounting Specifications: 4 (20.5 kg) capacity hopper with snap-on stainless steel hopper bottom & slide for easy cleaning; sight window bolt-on mounting for easy removal cam-type rate gauge; rubber rotor blade and sealed bearings. 1. SELECT A 45 LB CAPACITY JUMBO APPLICATOR PKG-COMPLETE WITH RUBBER ROTOR BAR, HOSES, HOSE CLAMPS, STABILIZERS & CLAMP STRAPS 09M902EM-R 45 lb. row crop applicator package consisting of hopper with twin rubber rotor bar for heavy core granules & two outlets, U frame mounting bracket, two 42 flexible tubes, stabilizers, and clamp straps. 29 lbs 601.00 09M903EM-R 45 lb. row crop applicator package consisting of hopper with twin rubber rotor bar for heavy core granules & two outlets, U frame mounting bracket, two 42 flexible tubes, stabilizers, and clamp straps. 31 lbs 646.00 09M904EM-R 45 lb. row crop applicator package consisting of hopper with twin rubber rotor bar for heavy core granules & two outlets, U frame mounting bracket, two 42 flexible tubes, stabilizers, and clamp straps. 3 703.00 9075589 12-Volt, 4 amp, 1/64 hp electric motor drive for use up to (2) hoppers. Complete with switch, drive sprockets, chain and guard. 11 lbs 346.00 9082843 12-Volt, 6 amp, 1/32 hp electric motor drive for use on up (3) hoppers. Complete with switch, drive sprockets, chain and guard. 1 602.00 9093895 Heavy-duty 12-volt, 25 amp, 1/4 hp electric motor drive for use on up to (12) hoppers. Complete with switch, drive sprockets, chain and guard. 4 1,595.00 69 lbs 1,090.00 1 207.00-10.00 84.00 By adding the letters LL to the end of any model row hopper, the hopper will have the lid die cut to accept a Lock n Load valve. Add amount to price in price list. 28.00 Lock n Load valve for attachment to row applicator 124.00 2. Optional Drive Packages Ground-drive, rubberl wheel. Attaches to diamond or flat tool bar. Complete with driven 09069286R-C1 sprocket and chain. Use with hopper mounts 09072649EMS & 09073649EMS. Drives up to 12 hoppers. 3. OPTIONAL HOPPER EXTENSION 9176744 Hopper extension for Jumbo applicator to add 4 additional capacity. If ordered as original equipment, deduct price of 09173668/40 lid from hopper package 09177744-3 Screen for jumbo hopper extension 4. OPTIONAL LOCK N LOAD COVER LL 09LLV
JUMBO INDIVIDUAL CAM-GAUGE APPLICATORS & PACKAGES 5. OPTIONAL CONNECTOR PKG WHEN MOUNTING MULTIPLE HOPPERS IN-LINE Connector drive tube for hoppers spaced up to 42 apart 93.00 9074323 Connector drive tube for hoppers spaced up to 80 apart 108.00 Per foot 5.00 2.00 6. OPTIONAL TUBING AND RO-BANDERS M06-875-000.875 in ID clear flexible tubing. Order by the foot. M11-0012-010 Mini-hose clamp, 5/8 x 1-1/4. (secures tube to spout) 09105D 5 ro-bander 42.00 09107D 7 ro-bander 39.00 09110D 10 ro-bander 47.00 14 ro-bander (comes with mounting brackets) 90.00 Attaching bracket for single ro-bander to tool bar. 79.00 9114 9073673 7. FIELD INSTALLED MOUNTING OPTIONS 09073649EMS Adjustable tool bar mount (14 to 24 ) fits up to 5 diamond or 7 square tool bar 9078765 09MLL 9178768 14 lbs 184.00 Hopper lid lock package for attachment to existing Jumbo or Super applicator 8 oz 40.00 Jumbo hopper lid and hinge only, opening for one Lock n Load valve 4 lbs 73.00 Suspender for placement inside hopper to keep granules suspended and create even flow of materials around rotor bar 35.00 4 lbs 57.00 09072654-3 U-frame mounting bracket for Jumbo applicator 9074321
JUNIOR STEEL CAM-GAUGE APPLICATORS PACKAGES CAM GAUGE METERING OF HERBICIDES AND INSECTICIDES 20 lb capacity of granular ag chemicals at density of 45 lb/cu ft Choice of 1, 2 or 3 openings per hopper Hopper lid measures 9 x 10 3/4 Includes rubber rotor bar OPTIONS: Extension to double capacity. Lock n Load lids, Lock n Load valve. 1. SELECT A 20 LB CAPACITY JUNIOR APPLICATOR PACKAGE 0901JR-R 20 lb row applicator consisting of hopper with rubber rotor bar and one outlet. 1 356.00 0902JR-R 20 lb row applicator consisting of hopper with rubber rotor bar and two outlet. 1 370.00 0903JR-R 20 lb row applicator consisting of hopper with rubber rotor bar and three outlet. 16 lbs 389.00 2. CHOOSE A DRIVE PACKAGE 9075589 12-volt, 4 amp, 1/64 hp electric motor drive for use on up two hoppers. Complete with switch, drive sprockets, chain and guard. 11 lbs 346.00 9082843 12-volt, 6 amp, 1/32 hp electric motor for use on up three hoppers. Complete with switch, drive sprockets, chain and guard. 1 602.00 9093895 Heavy-duty 12 volt, 25 amp, 1/4 hp electric motor drive for use on up to twelve hoppers. Complete with switch drive sprockets, chain and guard. 4 1,595.00 69 lbs 1,090.00 10 lbs 151.00-10.00 By adding the letters LL to the end of any model row hopper, the hopper will have the lid die cut to accept a Lock n Load valve. Ad amount to price in price list. 28.00 Lock n Load valve for attachment to row applicator. 124.00 09069286R- Ground drive, steel wheel. Attaches to diamond or flat tool bar. Complete with driven sprocket and chain. Use with hopper mounts #09072649EMS and #09073649EMS. C1 Drives up to 12 hoppers. 3. OPTIONAL HOPPER EXTENSION TO INCREASE CAPACITY 9070535 Hopper extension for Junior applicator to add 2 additional capacity. If ordered as original equipment, deduct price of #09074142/50 lid from hopper package SPECIFICATIONS: 20lb (9.9 kg) capacity hopper (approximate, with clay granules), with snap-on stainless steel hopper bottom and slide for easy cleaning; bolt-n mounting for easy removal; precision cam-type rate gauge; rubber rotor and sealed bearings. 4. OPTIONAL LOCK N LOAD COVER LL 09LLV 5. OPTIONAL CONNECTOR PACKAGES WHEN MOUNTING MULTIPLE HOPPERS IN-LINE 9074321 Connector drive tube for hoppers spaced up to 42 apart 93.00 9074323 Connector drive tube for hoppers spaced up to 80 apart 108.00
JUNIOR STEEL CAM-GAUGE APPLICATORS PACKAGES 6. OPTIONAL TUBING AND RO-BANDERS M06-875-000.875 in ID clear flexible tubing. Order by the foot. Per Foot M11-0012-010 Mini-hose clamp, 5/8 x 1-1/4. (secures tube to spout) 5.00 2.00 5 ro-bander 42.00 09107D 7 ro-bander 39.00 09110D 10 ro-bander 47.00 14 ro-bander (comes with mounting brackets) 90.00 Attaching bracket for single ro-bander to tool bar. 79.00 14 lbs 184.00 4 lbs 57.00 9114 9073673 7. FIELD INSTALLED MOUNTING OPTIONS 09073649EMS Adjustable too bar mount (14 to 24 ) fits up to a 5 diamond or 7 square tool bar 09072624-3 U-frame replacement for super or junior applicators. 09105D
INDIVIDUAL ITEMS FOR APPLICATORS SUSPENDER, Super hopper 9074321 9178768 CONNECTOR DRIVE TUBE 35.00 93.00 Use for up to 42 hopper spacing. Weight. 09073649EMS Weight. 180.00 9074323 108.00 TOOL BAR MOUNTING CONNECTOR DRIVE TUBE Adjustable 14 to 24 high. Fits up to 5 diamond Use for up to 80 hopper spacing. to 5 diamond or 7 square tool bar. Weight. Weight 14 lbs. SUSPENDER, Jumbo hopper
DRIVES FOR ROW CROP CAM GAUDE APPLICATORS 9075589 12-VOLT ELECTRIC MOTOR DRIVE -complete with switch, drive speakers, chain and guard. 4 amp. 1/64 HP. Use on two hoppers. Silver or black color 346.00 281.00 4 lbs 243.00 1 602.00 6 lbs 419.00 4 1,595.00 9 lbs 755.00 HYDRAULIC MOTOR DRIVE -Complete with Flo-Control valve, drive sprockets, chain and bracket. 24 lbs 1,288.00 HYDRAULIC C7K MOTOR -With 09076691 Flo-Control. 19 lbs 960.00 GROUND DRIVE, RUBBER TIRE attaches to diamond or flat tool bar. Complete with driven sprocket and chain. Use with hipper mounts 09072649EMS and 09073649EMS 69 lbs 1,090.00 09075589-4 12-VOLT ELECTRIC MOTOR only 12-VOLT ELECTRIC MOTOR DRIVE -complete with switch, sprockets, chain and guard. 6 amp, 1/32 HP for use with up to three hoppers. Not for use on PDM or PDA applicators. 09082842-4 12-VOLT SERVICE MOTOR -only with drive sprocket. 9093895 HEAVY DUTY ELECTRIC MOTOR DRIVE -Complete with switch and drive parts. May be used in place of hydraulic. 25 amp, 1/4 HP for up to 12 hoppers L01-0012-007 HEAVY DUTY ELECTRIC MOTOR only. 9074678 09076679-C1 09069286R-C1 11 lbs 09075589-4SM 12-VOLT SERVICE MOTOR -with mount 9082843
ACCESSORIES FOR APPLICATORS 09072624-3 32.00 U FRAME or Super or Junior applicators 09105D 42.00 47.00 90.00 65.00 207.00 151.00 207.00 5 INCH RO-BANDER Weight. 09072645-3 53.00 U FRAME for Jumbo applicators 09107D 36.00 Weight 4 lbs. 7 INCH RO-BANDER Weight 09W1 153.00 DRIVE PACKAGE 5 to 1 ratio. Same as above with one pair 3/4R insert only. Use 09110D 10 INCH RO-BANDER with line shaft (50-100 RPM) available f Weight 2 lb Weight 09069507P 113.00 RESILIENT RUBBER ROTOR, 3 inch for single outlet. Super or Junior applicator. 9114 Use with heavy-core granules. 14 INCH RO-BANDER complete with mounting brackets Includes washers. Weight 2 lb. Weight 2 lb. 09076719P 111.00 M10-2539-200 TWIN RESILIENT RUBBER ROTOR for two outlet Super or Junior WYE CONNECTOR for use on two outlets or to combine chemicals from two hoppers applicator. Use with heavy core to one tube. granules. Includes washer Weight 1 lb Weight. *09069508P 111.00 9176744 RESILIENT RUBBER ROTOR, 8, for Super or Junior applicators. Use with heavy core HOPPER EXTENSION FOR Jumbo applicator granules. Includes 09177744-3 washers. SCREEN 78.00 for above Weight 12 lb. Weight. Weight 2 lb. *09076719-C1P 120.00 TWIN RESILIENT RUBBER ROTOR, for two outlet Jumbo applicator. Use with heavy 9070535 m planter. HOPPER EXTENSION for Junior applicator. Weight 10 lbs. core granules (16 3/4" shaft). Includes washers. Weight 2 lb. *09070534P RESILIENT RUBBER ROTOR, 10 for Jumbo applicator. Use with heavy core 109.00 9093896 HOPPER EXTENSION for Super applicator. Weight 11 lbs granules (16-3/4" shaft). Includes washers. Weight 2 lb.
ACCESSORIES FOR APPLICATORS 1200 gallon tank & frame Powder coat paint Top operated tank drain Drawbar with swivel hitch Remote sight gauge Clean water dispenser (4.5 gal) 3 Main & 2 rinse tank quick fill Inline boom filters Road traffic lights Flush system 130 gallon
ACCESSORIES FOR APPLICATORS
POLY FORAGE PRESERVITIVE APPLICATOR PACKAGES Cam Gauge Metering of Forage Preservatives 2.3 cu ft capacity polyethylene hopper Approx. 100 lb capacity at 45 lb per cu ft density Cam gauge metering, 2, 3 or 4 outlets U-frame mounting bracket with 1/2 holes and slots included Tubing and hose clamps are optional Note: Gandy Company does not supply rate charts for these additive or preservative products. Purchaser must consult the manufacturer for suggested rates and perform a field calibration check. 1. SELECT POLY FORAGE PRESERVATIVE APPLICATOR 100 lbs capacity hopper with four-outlets on stainless steel bottom and slide, straight 09PC04WP12 spouts, 8 rubber rotor, U frame mounting bracket and two spout caps. 1/64 hp 12 volts 4 1,294.00 motor assembled in place 2. SELECT DROP TUBE AND SPRING CLIPS 2406224-12 Plastic drop tube, 12 inches 1 lbs 6.00 2406224-108 Plastic drop tube, 9 ft 36.00 E09-06137 Spring clip to fasten tubing to spouts 1 oz 1.00 3. FIELD INSTALLED OPTIONS AND WEAR S 9099948 Mounting for forage preservative applicator, hitch placement on round balers 178.00 9072661 110-Volt replacement motor drive, complete 975.00 09075589-4 12-volt, 4 amp, 1/64 hp replacement motor only 243.00 09099923-2 Bottom and slide with two openings. Spouts angled toward cam gauge. 4 lbs 155.00 09099926-2C1 Bottom and slide with two openings. Straight spouts. 155.00 09099926-2C2 Bottom and slide with two openings. Spouts angles away cam gauge 155.00 09099926-3 Bottom and slide with three openings. Spouts angles toward cam gauge 163.00 09099926-3C1 Bottom and slide with three openings. Straight spouts 163.00 09099926-3C2 Bottom and slide with three openings. Spouts angles away from cam gauge 163.00 09099926-4 Bottom and slide with four openings. Spouts angles toward cam gauge 178.00 09099926-4C1 Bottom and slide with four openings. Straight spouts 178.00 09099926-4C2 Bottom and slide with four openings. Spouts angles away from cam gauge 178.00 Cam gauge 7.00 09076719PC Twin rubber rotor replacement pkg for two-outlet hopper. Use with heavy-core granules. Includes washers & O-rings. 109.00 09069508PC Rubber 8 rotor bar replacement pkg. Includes washers, O-rings & spacers. 113.00 0908012-6 Replacement straight spout 7.00 09073636-6 Replacement angled spout 9.00 906375
JUMBO STEEL FORAGE ADDITIVE APPLICATOR PACKAGES Cam Gauge Metering of Forage Preservatives 45 lb capacity 1/64 hp 12 volt electric motor drive Steel applicators with cam gauge metering U-frame mounting bracket with 1/2 holes and slots included Optional extensions to double capacity can be ordered for factory Note: Gandy Company does not supply rate charts for these additive or preservative products. Purchaser must consult the manufacturer for suggested rates and perform a field calibration check. Mounting locations vary on implements and user may be required to fabricate mounting brackets. 1. SELECT A 45 LB CAPACITY JUMBO APPLICATOR 45 lb capacity Jumbo hopper with two-outlet stainless steel bottom and slide, straight 09M902WP12 spout, an 10 rubber rotor, U frame mounting bracket and two spout caps. 1 6/4 hp 12-41 lbs 847.00 4 857.00 4 883.00 10 lbs 207.00-10.00 2. OPTIONAL HOPPER EXTENSION TO INCREASE CAPACITY 9176744 Hopper extension for Junior applicator to add 11 cu ft or approx 4 additional capacity If ordered as original equipment, deduct price of #09173668/40 lid for hopper pkg 3. SELECT DROP TUBE AND SPRING CLIPS 2406224-12 Plastic drop tube, 12 inches 6.00 36.00 1 oz 1.00 09177744-3 Screen for Jumbo hopper 4 lbs 84.00 M10-0005-011 Rain cover for Jumbo hopper with 12-volt electric motor 69.00 975.00 243.00 09173669-2 Bottom and slide with two openings. Spouts angled toward cam gauge. 122.00 09173669-2C1 Bottom and slide with two opening. Straight spout 122.00 09173669-2C2 Bottom and slide with two opening. Spout angled away from cam gauge 122.00 2406224-108 Plastic drop tube, 9 ft E09-06137 Spring clip to fasten tubing to spouts 4. FIELD INSTALLED OPTIONS AND WEAR S 9072661 110-volt replacement motor drive, complete 09075589-4 12-volt, 4 amp, 1/64 hp replacement motor only 4 lbs 09173669-3 Bottom and slide with three openings. Spouts angled toward cam gauge 130.00 09173669-3C1 Bottom and slide with three opening. Straight spout 130.00 09173669-3C2 Bottom and slide with three opening. Spout angled away from cam gauge 130.00 09173669-4 Bottom and slide with four openings. Spouts angled toward cam gauge 138.00 09173669-4C1 Bottom and slide with four openings. Straight spouts 138.00 09173669-4C2 Bottom and slide with four openings. Spouts angled away cam gauge 138.00 7.00 906375 Cam gauge 09076719-C1P Twin rubber rotor replacement package. Includes washers, O-rings and bushings. 120.00 09070534P 10-inch rubber rotor replacement package. Includes washers and O-rings. 109.00 0908012-6 Replacement individual straight spout. 7.00 9.00 09073636-6 Replacement individual angled spout volt motor assembled. 45 lb capacity Jumbo hopper with three-outlet stainless steel bottom and slide, straight 09M903WP12 spout, an 10 rubber rotor, U frame mounting bracket, and two spout caps. 1 6/4 hp 12volt motor assembled. 45 lb capacity Jumbo hopper with four-outlet stainless steel bottom and slide, straight 09M904WP12 spout, an 10 rubber rotor, U frame mounting bracket, and two spout caps. 1 6/4 hp 12volt motor assembled.
ADJUSTABLE SLOTTED BOTTOM HOPPER Developed for Humus, Peat-Based Inoculants and Talc 2.3 cu. ft. capacity poly hopper U-frame mounting bracket with 1/2 pre-drilled holes and slots Special versions suitable for talcum powder application Adjustable slotted bottom gives application across the hopper s 14 width Developed for application of humus or peat-based inoculants in the field or at seed production facilities 1. SELECT HUMUS OR PEAT-BASED INOCULANT APPLICATOR BELOW 9099937 Adjustable slotted bottom poly applicator for humus or peat based inoculants. Includes 110 volt motor 7 2,143.00 CHOOSE TALC APPLICATOR BELOW: 9008961 Adjustable slotted bottom poly applicator for talc. Includes 12 volt motor 7 1,587.00 9008962 Adjustable slotted bottom poly applicator for talc. Includes 110 volt motor 7 2,088.00 51.00 24.00 2. WEAR S 9099946 Latch package for poly hopper lid (replacement) M05-0000-008 Rubber replacement latch only, 4 Note: Testing of material is always recommended for materials of uncertain flow characteristics. Rates can be adjusted by cam gauge, but unit is not recommended for critical or fine rates. SPECIFICATIONS: 2.3 cu. ft. polyethylene hopper, lid with latches, three internal agitators, slotted bottom adjusted for size with cam gauge to meter material the width of the hopper. U-frame bracket with 1/2 holes and slots for mounting is included.
10T SERIES 6,8,10,12 FT Tractor Tow Hitch Standard Equipment: Hot rolled steel removable hopper bottom and hinged rate-control slide Shur-feed rotors; hand-removable stub drive for rotor Adjustable spread plate Hand lever shutoff standard (optional hydraulic or electric available) Weather-tight removable and reversible covers with spill-guards and dual lock-down latches for each cover 15 x 5k 6 rims standard Powder angles included Low speed bearings standard; high-speed bearings for road speeds optional Heavy-duty tractor hitch with extension at rear for trailing non-ground engaging machines 1.5 cubic feet per ft. of hopper length; approx 100 lbs/ft Diamond-shaped openings 1-1/2 long, spaced 4 apart 36 90 13 above ground; approx 6 with spread plate 15 x 5K 6-bolt rims included; 15 x 10k rims optional for floatation tires Optional 1. CHOOSE A SPREADER 1006T 6-foot Spreader. Approx. hopper capacity, 600 pounds. 9 cu ft. Wheel tread 86 (with wheels dished in ). Overall width, 99. 18 openings 51 5,553.00 1008T 8-foot Spreader. Approx. hopper capacity, 800 pounds. 12 cu ft. Wheel tread 110 (with wheels dished in ). Overall width, 123. 24 openings 598 lbs 6,019.00 1010T 10-foot Spreader. Approx. hopper capacity, 1,000 pounds. 15 cu ft. Wheel tread 134 (with wheels dished in ). Overall width, 147. 30 openings 648 lbs 6,585.00 1012T 12-foot Spreader. Approx. hopper capacity, 1,200 pounds. 18 cu ft. Wheel tread 158 (with wheels dished in ). Overall width, 171. 36 openings 75 7,172.00 332.00 1,019.00 1,138.00-789.75 30 lbs 155.00 NET - 101.25 2. CONVERT HAND LEVER SHUTOFF TO OPTIONAL HYDRAULIC OR ELECTRIC SHUTOFF 3209743A 101104 Hydraulic shutoff cylinder and mounting in lieu of hand lever. Factory installed. (user supplies 1/4 hydraulic hoses from tractor to shutoff cylinder and 1/4 NPT fittings) Electric actuator shutoff and mounting in lieu of hand lever. Factory installed Specifications: Capacity: Bottom/Slide: Overall Height: Overall Length: Clearance: Rims: Tires: 3. LOW SPEED BEARING BEARINGS INCLUDED IN BASE; OPTIONAL HIGH-SPEED BEARING BELOW 102105 Heavy-duty hub/axle for road speeds 10207 Deduct std. hub & axle when ordering HD hub and axle NET 4. 15 X 5K 6-BOLT RIMS INCLUDED IN BASE PRICE; OPTIONAL 15 X 10K BELOW R01-0015-030 Rim only 15 x 10K (for high-floatation tire-no. 11L15) two required R01-0015-020 Deduct 2 15 x 5K rims when ordering #R01-0015-030
10T SERIES 6,8,10,12 FT Tractor Tow Hitch 5. 10T SERIES SHIPS WITHOUT TIRES - OPTIONAL TIRES LISTED BELOW R02-0015-010 6.75 x 15, 4 ply rib implement tubeless tire. Uses standard 15 x 5K rims included in base. Order two tires per spreader R02-0015-020 11L115, 6 ply tubeless tire. Requires R01-0015-030 rim. Order tow tires per spreader. 18 lbs 218.00 30 lbs 254.00 6. FIELD INSTALLED OPTIONS Calibration pan, 4 ft for 8 ft spreader (order 2 per unit) 6 lbs 93.00 Calibration pan, 5 ft for 10 ft spreader (order 2 per unit) 8 lbs 97.00 1125214 Calibration pan, 6 ft for 12 ft spreader (order 2 per unit) 11 lbs 101.00 108013 Clamp on hole closure 17.00 108190 Deflectors, side-dressing or banding 96.00 101103 Electric actuator shutoff 1,148.00 3209743 Hydraulic cylinder & mounting as an extra when hopper has hand lever in place 542.00 3209742 Hydraulic cylinder only 430.00 Hydraulic cylinder repair kit 58.00 58.00 3209742R 197102 Manual holder pkg option for units not so equipped 0566394-T Powder angle pkg for 6ft T series standard equipment, as an extra 109.00 0586394-T Powder angle pkg for 8ft T series standard equipment, as an extra 2. 131.00 05106394-T Powder angle pkg for 10ft T series standard equipment, as an extra 141.00 05127694-T Powder angle pkg for 12ft T series standard equipment, as an extra 3. 153.00 1 lbs 24.00 5708210 Spout holder pkg, centered angle spout only, order one per outlet RETROFIT KITS Conversion pkg to T-series for discontinued spreaders are listed below. To ensure correct rate chart usage, please note that: current production Model 10T series has 1-1/2 openings spaced 4 apart - 10 series has 2 openings spaced 6 apart - 10A series has 11/2 openings spaced 3-3/8 apart - 10S series has 1-1/2 openings spaced 6 apart 0568011 & 12PKG Retrofit 10T bottom, slide & rotor pkg, 6ft for discontinued 1006 & 1006A models 10 1,280.00 0588011 & 12PKG Retrofit 10T bottom, slide & rotor pkg, 8ft for discontinued 1008 & 1008A models 12 1,481.00 05108011 & Retrofit 10T bottom, slide & rotor pkg, 10ft for discontinued 1010 & 1010A models 12PKG 14 1,723.00 05128011 & Retrofit 10T bottom, slide & rotor pkg, 12ft for discontinued 1012 & 1012A models 12PKG 164 lbs 1,963.00 185214 1105214
10TR SERIES 6,8,10,12ft 3 POINT HITCH, END-WHEEL DRIVE WITH HYDRAULIC SHUTOFF & STAND Standard Equipment: Cat ll, 3 pt hitch 10TR series Hydraulic shutoff (user supplies 1/4 hyd hoses and 1/4 NPT fitting) Parking stand End wheel drive turns rotor in each side Powder angles and adjustable spread plate Hot rolled steel removable hopper bottom and hinged rate-control slide Shur-feed rotors; hand-removable stub drive for rotor Weather-tight removable and reversible covers with spill-guards and dual lock-down latches for each cover Low speed bearings standard; high-speed bearings for road speeds optional Tires: 1.5 cubic feet per ft. of hopper length; approx 100 lbs/ft Diamond-shaped openings 1-1/2 long, spaced 4 apart 36 90 13 above ground; approx 6 with spread plate 15 x 5K 6-bolt rims included; 15 x 10k rims optional for floatation tires Rims can be dished-out for 5-inch wider wheel spacing Optional 1006TR 6-foot Spreader. Cat ll 3 pt hitch. Hydraulic shut off (hyd hoses not included user supplies 1/4 hoses and 1/4 NPT fitting) Parking stand. Approximately hopper capacity, 600 pounds 9 cu ft. Wheel tread 87 (with wheels dished in ). Overall width 100. 18 openings 61 7,143.00 1008TR 8-foot Spreader. Cat ll 3 pt hitch. Hydraulic shut off (hyd hoses not included user supplies 1/4 hoses and 1/4 NPT fitting) Parking stand. Approximately hopper capacity, 800 pounds 12 cu ft. Wheel tread 87 (with wheels dished in ). Overall width 124. 24 openings 70 7,496.00 1010TR 10-foot Spreader. Cat ll 3 pt hitch. Hydraulic shut off (hyd hoses not included user supplies 1/4 hoses and 1/4 NPT fitting) Parking stand. Approximately hopper capacity, 1,000 pounds 15 cu ft. Wheel tread 87 (with wheels dished in ). Overall width 148. 30 openings 80 7,849.00 1012TR 112-foot Spreader. Cat ll 3 pt hitch. Hydraulic shut off (hyd hoses not included user supplies 1/4 hoses and 1/4 NPT fitting) Parking stand. Approximately hopper capacity, 1,200 pounds 18 cu ft. Wheel tread 87 (with wheels dished in ). Overall width 172. 36 openings 90 8,202.00 1. CHOOSE A SPREADER Specifications: Capacity: Bottom/Slide: Overall Height: Overall Length: Clearance: Rims: 2. 10TR SERIES SHIPS WITHOUT TIRES OPTIONAL TIRES LISTED BELOW R02-0015010 6.75 x 15, 4 ply rib implement tubeless tire. Uses standard 15 x 5K rims included in base. Order two tires per spreader 18 lbs 218.00 R02-0015020 11L115, 6 ply tubeless tire. Requires R01-0015-030 rim. Order tow tires per spreader. 30 lbs 254.00
10TR SERIES 6,8,10,12ft 3 POINT HITCH, END-WHEEL DRIVE WITH HYDRAULIC SHUTOFF & STAND 3. FIELD INSTALLED OPTIONS Calibration pan, 4 ft for 8 ft spreader (order 2 per unit) 6 lbs 93.00 Calibration pan, 5 ft for 10 ft spreader (order 2 per unit) 8 lbs 97.00 1125214 Calibration pan, 6 ft for 12 ft spreader (order 2 per unit) 11 lbs 101.00 108013 Clamp on hole closure 17.00 108190 Deflectors, side-dressing or banding 96.00 3209743 Hydraulic cylinder & mounting as an extra when hopper has hand lever in place 542.00 3209742 Hydraulic cylinder only 430.00 Hydraulic cylinder repair kit 58.00 3209742R 197102 Manual holder pkg option for units not so equipped 58.00 0566394-T Powder angle pkg for 6ft T series standard equipment, as an extra 109.00 0586394-T Powder angle pkg for 8ft T series standard equipment, as an extra 2. 131.00 05106394-T Powder angle pkg for 10ft T series standard equipment, as an extra 141.00 05127694-T Powder angle pkg for 12ft T series standard equipment, as an extra 3. 153.00 1 lbs 24.00 5708210 Spout holder pkg, centered angle spout only, order one per outlet RETROFIT KITS Conversion pkg to T-series for discontinued spreaders are listed below. To ensure correct rate chart usage, please note that: current production Model 10T series has 1-1/2 openings spaced 4 apart - 10 series has 2 openings spaced 6 apart - 10A series has 11/2 openings spaced 3-3/8 apart - 10S series has 1-1/2 openings spaced 6 apart 0568011 & 12PKG Retrofit 10T bottom, slide & rotor pkg, 6ft for discontinued 1006 & 1006A models 10 1,280.00 0588011 & 12PKG Retrofit 10T bottom, slide & rotor pkg, 8ft for discontinued 1008 & 1008A models 12 1,481.00 05108011 & Retrofit 10T bottom, slide & rotor pkg, 10ft for discontinued 1010 & 1010A models 12PKG 14 1,723.00 05128011 & Retrofit 10T bottom, slide & rotor pkg, 12ft for discontinued 1012 & 1012A models 12PKG 164 lbs 1,963.00 185214 1105214
10T-PTH SERIES 6,8,10,12 ft Spreaders with 3 pt Hitch & Hydraulic Shutoff Specifications: Capacity: Bottom/Slide: Overall Height: Overall Length: Clearance: 1.5 cubic feet per ft. of hopper length; approx 100 lbs/ft Diamond-shaped openings 1-1/2 long, spaced 4 apart 36 90 13 above ground; approx 6 with spread plate 1. CHOOSE A SPREADER 6-foot Spreader. Bottom with 1-1/2 holes spaced 4 apart, powder angles, mounting 1006T-PTH brackets, parking stand and *hydraulic shutoff. Approximately hopper capacity, 600 pounds 9 cu ft. 18 openings 8-foot Spreader. Bottom with 1-1/2 holes spaced 4 apart, powder angles, mounting 1008T-PTH brackets, parking stand and *hydraulic shutoff. Approximately hopper capacity, 800 pounds 12 cu ft. 24 openings 10-foot Spreader. Bottom with 1-1/2 holes spaced 4 apart, powder angles, mounting 1010T-PTH brackets, parking stand and *hydraulic shutoff. Approximately hopper capacity, 1,000 pounds 15 cu ft. 30 openings 12-foot Spreader. Bottom with 1-1/2 holes spaced 4 apart, powder angles, mounting 1012T-PTH brackets, parking stand and *hydraulic shutoff. Approximately hopper capacity, 1,200 pounds 18 cu ft. 36 openings 61 6,043.00 70 6,439.00 80 6,983.00 90 7,336.00 Standard Equipment: 3 pt hitch Parking stand Powder angles and adjustable spread plate included Hot rolled steel removable hopper bottom and hinged rate-control slide Shur-feed rotors; hand-removable stub drive for rotor Weather-tight removable and reversible covers with spill-guards and dual lock-down latches for each cover Hydraulic shutoff (user supplies 1/4 hyd hoses and 1/4 NPT fitting) Operators manual and rate charts included 2. CHOOSE A HYDRAULIC OR ELECTRIC DRIVE PACKAGE 57082100 *Hydraulic drive pkg, less hoses, 15 gal flow (*user supplies 1/2 hydraulic hoses from tractor to drive and 1/2 NPT fittings) 2 1,092.00 57094108 Electric drive pkg, 12V, 11-13 amps 54 lbs 1,751.00
10T-PTH SERIES 6,8,10,12 ft Spreaders with 3 pt Hitch & Hydraulic Shutoff 3. FIELD INSTALLED OPTIONS 185214 Calibration pan, 4 ft for 8 ft spreader (order 2 per unit) 6 lbs 1105214 Calibration pan, 5 ft for 10 ft spreader (order 2 per unit) 8 lbs 97.00 1125214 Calibration pan, 6 ft for 12 ft spreader (order 2 per unit) 11 lbs 101.00 108013 Clamp on hole closure 17.00 108190 Deflectors, side-dressing or banding 96.00 101103 Electric actuator shutoff 1,148.00 3209742 Hydraulic cylinder only 430.00 3209742R Hydraulic cylinder repair kit 58.00 57082105 Hydraulic hose pkg-connects hydraulic shutoff cylinder to hydraulic drive motor 301.00 197102 Manual holder pkg option for units not so equipped 58.00 0566394-T Powder angle pkg for 6ft T series standard equipment, as an extra 109.00 0586394-T Powder angle pkg for 8ft T series standard equipment, as an extra 2. 131.00 05106394-T Powder angle pkg for 10ft T series standard equipment, as an extra 141.00 05127694-T Powder angle pkg for 12ft T series standard equipment, as an extra 3. 153.00 1 lbs 24.00 Retrofit 10T bottom, slide & rotor pkg, 6ft for discontinued 1006 & 1006A models 10 1,280.00 Retrofit 10T bottom, slide & rotor pkg, 8ft for discontinued 1008 & 1008A models 12 1,481.00 Retrofit 10T bottom, slide & rotor pkg, 10ft for discontinued 1010 & 1010A models 14 1,723.00 Retrofit 10T bottom, slide & rotor pkg, 12ft for discontinued 1012 & 1012A models 164 lbs 1,963.00 5708210 RETROFIT KITS 0568011 & 12PKG 0588011 & 12PKG 05108011 & 12PKG 05128011 & 12PKG Spout holder pkg, centered angle spout only, order one per outlet Conversion pkg to T-series for discontinued spreaders are listed below. To ensure correct rate chart usage, please note that: current production Model 10T series has 1-1/2 openings spaced 4 apart - 10 series has 2 openings spaced 6 apart - 10A series has 11/2 openings spaced 3-3/8 apart - 10S series has 1-1/2 openings spaced 6 apart 93.00
10T-TBM SERIES 6,8,10,12 ft Spreaders for Implement Mount Specifications: Capacity: Bottom/Slide: Overall Height: Overall Length: Clearance: 1.5 cubic feet per ft. of hopper length; approx 100 lbs/ft Diamond-shaped openings 1-1/2 long, spaced 4 apart 36 90 13 above ground; approx 6 with spread plate 1006T-TBM 6-foot Spreader. Bottom with 1-1/2 holes spaced 4 apart with 18 outlets. Powder angles and mounting brackets. Approximately hopper capacity, 600 pounds 9 cu ft 61 4,370.00 1008T-TBM 8-foot Spreader. Bottom with 1-1/2 holes spaced 4 apart with 24 outlets. Powder angles and mounting brackets. Approximately hopper capacity, 800 pounds 12 cu ft. 70 4,717.00 1010T-TBM 10-foot Spreader. Bottom with 1-1/2 holes spaced 4 apart with 30 outlets. Powder angles and mounting brackets. Approximately hopper capacity, 1,000 pounds 15 cu ft. 80 5,073.00 1012T-TBM 12-foot Spreader. Bottom with 1-1/2 holes spaced 4 apart with 36 outlets. Powder angles and mounting brackets. Approximately hopper capacity, 1,200 pounds 18 cu ft. 90 5,427.00 1. CHOOSE A SPREADER 2. SELECT ONE: HAND LEVER, HYDRAULIC OR ELECTRIC SHUTOFF-FACTORY INSTALLED 3408236 Hand lever shutoff 7 lbs 102.00 3209742 *Hydraulic cylinder shutoff 6+ lbs 430.00 101103 Electric shutoff 1,148.00 Standard Equipment: Implement mount Powder angles and adjustable spread plate included Hot rolled steel removable hopper bottom and hinged rate-control slide Shur-feed rotors; hand-removable stub drive for rotor Weather-tight removable and reversible covers with spill-guards and dual lock-down latches for each cover Electric or hydraulic drive Operators manual and rate charts included 3. OPTIONAL MOUNTING LEG PACKAGE 57082102 Mounting leg pkg of 2 of 5 x 7 implement tool bar, straight 76 lbs 364.00 57082104 Mounting leg pkg of 2 of 5 x 7 implement tool bar, offset 69 lbs 364.00 5708424 Mounting leg pkg of 21 for center leg of 10ft, or longer span 18 lbs 196.00
10T-PTH SERIES 6,8,10,12 ft Spreaders with 3 pt Hitch & Hydraulic Shutoff 4. OPTIONAL TOOL BAR 5768330 6 ft tool bar 90 lbs 341.00 5788660 8 ft tool bar 120 lbs 387.00 57108330 10 ft tool bar 150 lbs 503.00 57128330 12 ft tool bar 180 lbs 560.00 5. CHOOSE A HDRAULIC OR ELECTRIC DRIVE PACKAGE *Hydraulic drive pkg., less hoses, 15 gallon flow (user supplies 1/2 hyd hoses from tractor to drive & 1/2 NPT fitting) 2 1,092.00 57094108 Electric drive pkg, 12V, 11-13 amps 54 lbs 1,751.00 6. FIELD INSTALLED OPTIONS 185214 Calibration pan, 4 ft for 8 ft spreader (order 2 per unit) 6 lbs 93.00 1105214 Calibration pan, 5 ft for 10 ft spreader (order 2 per unit) 8 lbs 97.00 1125214 Calibration pan, 6 ft for 12 ft spreader (order 2 per unit) 11 lbs 101.00 108013 Clamp on hole closure 17.00 108190 Deflectors, side-dressing or banding 101103 Electric actuator shutoff 3209742 Hydraulic cylinder only 3209742R 57082105 197102 96.00 1,148.00 430.00 Hydraulic cylinder repair kit 58.00 Hydraulic hose pkg-connects hydraulic shutoff cylinder to hydraulic drive motor 301.00 58.00 Manual holder pkg option for units not so equipped 0566394-T Powder angle pkg for 6ft T series standard equipment, as an extra 109.00 0586394-T Powder angle pkg for 8ft T series standard equipment, as an extra 2. 131.00 05106394-T Powder angle pkg for 10ft T series standard equipment, as an extra 141.00 05127694-T Powder angle pkg for 12ft T series standard equipment, as an extra 3. 153.00 1 lbs 24.00 0568011&12 Retrofit 10T bottom, slide & rotor pkg, 6ft for discontinued 1006 & 1006A models PKG 10 1,280.00 0588011&12 Retrofit 10T bottom, slide & rotor pkg, 8ft for discontinued 1008 & 1008A models PKG 12 1,481.00 05108011&12 Retrofit 10T bottom, slide & rotor pkg, 10ft for discontinued 1010 & 1010A models PKG 14 1,723.00 05128011&12 Retrofit 10T bottom, slide & rotor pkg, 12ft for discontinued 1012 & 1012A models PKG 164 lbs 1,963.00 5708210 RETROFIT KITS Spout holder pkg, centered angle spout only, order one per outlet 57082100 Conversion pkg to T-series for discontinued spreaders are listed below. To ensure correct rate chart usage, please note that: current production Model 10T series has 1-1/2 openings spaced 4 apart - 10 series has 2 openings spaced 6 apart - 10A series has 11/2 openings spaced 3-3/8 apart - 10S series has 1-1/2 openings spaced 6 apart
6500 SERIES 4,5 & 6 ft Drop Spreader With Tractor Tow Hitch Spreads Fertilizer, Granular Chemicals, Lime & Seed Standard Equipment: Precision-mated bottom & slide of cold milled steel Hand lever shutoff standard (optional hydraulic or electric available) Adjustable angle spread plate Optional jigglers to aid flow of material Choice of 16, 18, 20 & 26 tires Polyester powder-coated baked-n finish, green 1. CHOOSE A DROP SPREADER 6504T16 4 ft spreader with tractor hitch, hand-lever shutoff and 16 pneumatic tires on steel rim. Approx 260 lbs of capacity 230 lbs 2,217.00 6504T18 4 ft spreader with tractor hitch, hand-lever shutoff and 18 high floatation pneumatic tires on steel rim. Approx 260 lbs of capacity 234 lbs 2,379.00 6505T16 5 ft spreader with tractor hitch, hand-lever shutoff and 16 pneumatic tires on steel rim. Approx 32 of capacity 27 2,299.00 6505T18 5 ft spreader with tractor hitch, hand-lever shutoff and 18 high floatation pneumatic tires on steel rim. Approx 32 of capacity 277 lbs 2,457.00 6506T16 6 ft spreader with tractor hitch, hand-lever shutoff and 16 pneumatic tires on steel rim. Approx 390 lbs of capacity 288 lbs 2,379.00 6506T18 6 ft spreader with tractor hitch, hand-lever shutoff and 18 high floatation pneumatic tires on steel rim. Approx 390 lbs of capacity 31 2,538.00 31 lbs 558.00 1,141.00 2. OPTIONAL FACTORY INSTALLED HYDRAULIC OR ELECTRIC SHUT OFF 659711 6522 Hydraulic shut-off attachment in lieu of hand lever (factory installed-hydraulic hoses not included) (user supplies 1/4 hydraulic hoses from tractor to shutoff cylinder & 1/4 NPT fittings) Electric shutoff attachment, ordered in lieu of hand shutoff ( factory installed) Specifications: Tires: Choice of 16 pneumatic tires with steel rim, 18 high-flotation pneumatic tires with steel rim, or 20 or 26 diameter semipneumatic tires on steel disc rims. Capacities: 4-ft., 4 cubic foot (113 dm3) or approx. 260 lbs. (116 kg); 5-ft., 5 cubic foot (142 dm3 ) or approx. 32. (145 kg); 6-ft, 6 cu ft (170 dm³) or approx 390 lbs (174 kg) 6504 Wheel Spacing: 16 tires=51, 18 tires=58-1/2, 20 & 26 tires=53-1/2 : 6506 Wheel Spacing: 16 tires=75, 18 tires=80-1/2, 20 & 26 tires=77-1/2 : 6504 Overall Width: 16 tires=59, 18 tires=66, 20 & 26 tires=58-1/4 6505 Overall Width: 16 tires=71, 18 tires=78, 20 & 26 tires=70-1/4 6506 Overall Width: 16 tires=83, 18 tires=90, 20 & 26 tires=82-1/4 3. FIELD INSTALLED OPTIONS 6521 Electric actuator shut-off attachment, retrofit 6 lbs 1,204.00 17 lbs 298.00 21.00 69242 Tractor hitch bundle with lever shut-off 107813 Bolt-on hole closures, one per opening. 107890 Deflectors for side dressing or bending. 4 oz 94.00 185214 4-ft. calibration pan 1 lb 93.00 1105214 5-ft. calibration pan. 6 lbs 97.00 1125214 6-ft. calibration pan. 7 lbs 101.00 657 Jiggler package, 4-ft. 8 lbs 171.00 658 Jiggler package, 5-ft. 8 lbs 195.00 659 Jiggler package, 6-ft. 9 lbs 218.00
6500 SERIES 4,5 & 6 ft Drop Spreader With TractorTow Hitch Spreads Fertilizer, Granular Chemicals, Lime & Seed 4. REPLACEMENT TIRE PACKAGES, HUB & RIM 65A16 16 Wheel Package of two: Steel hub and rims, pneumatic tire 1 295.00 65A18 18 Wheel package of two: Steel hub and rims, 1 bore with 18 x 8.5 x 8 4-ply tubeless pneumatic tires (standard on 6-ft. spreader). 4 549.00 65A20 20 Wheel package of two: Steel hub and rims with 1-3/4 wide semi-pneumatic tires for higher clearance. 26 lbs 393.00 65A26 26 Wheel package of two: Steel hub and rims with 2 wide semi-pneumatic tires for higher clearance. 50 lbs 527.00 6518-4 Hub to adapt 15 x 15K rim for 6.70 x 15 tire for 6500 Series spreader. 2 required 6 lbs 261.00 R01-0015020 Rim only, 15 x 5K for 6.70 x 15 tire for greater clearance 19 lbs 104.00 R02-0015010 Tire only, 6.70 x 15, 4-ply rib tubeless for greater clearance. Order (2) per spreader 18 lbs 218.00 73.00 5. WEAR S 654-5 Bearing, end & center
6500 SERIES 5 & 6 ft Drop Spreader With 3PT Hitch End Wheel Drive System Standard Equipment: Hand lever shutoff standard (optional hydraulic or electric available) Parking stand Precision-mated bottom & slide of cold milled steel Adjustable angle spread plate Optional jigglers to aid flow of material Choice of 16, 18, 20 & 26 tires Specifications: Tires: Choice of 16 pneumatic tires with steel rim, 18 high-flotation pneumatic tires with steel rim, or 20 or 26 diameter semi-pneumatic tires on steel disc rims. Hole Size: 1 openings on all spreaders. 25 openings spaced 2.260 (5.7cm) on 5ft model; 30 openings spaced 2.188 (5.5cm) on 6 ft. Capacities: 5-ft., 5 cubic foot (142 dm3 ) or approx. 32. (145 kg); 6-ft, 6 cu ft (170 dm³) or approx 390 lbs (174 kg) Ground Clearance: 16 tires=6 ; 18 tires=7 ; 20 tires=8 ; 26 tires=11 (for greater ground clearance 6.75 x 15 tires can be ordered) 6505 Wheel Spacing: 16 tires=63, 18 tires=70-1/2, 20 & 26 tires=65-1/2 : 6506 Wheel Spacing: 16 tires=75, 18 tires=80-1/2, 20 & 26 tires=77-1/2 : 6505 Overall Width: 16 tires=71, 18 tires=78, 20 & 26 tires=70-1/4 6506 Overall Width: 16 tires=83, 18 tires=90, 20 & 26 tires=82-1/4 1. CHOOSE A DROP SPREADER 6505TR16 5 ft spreader with tractor hitch, end-wheel drive, 16 pneumatic tires on steel rim. 361 lbs 3,008.00 6505TR18 5 ft spreader with tractor hitch, end-wheel drive, 18 high floatation pneumatic tires on steel rim. 386 lbs 3,165.00 6506TR16 6 ft spreader with tractor hitch, end-wheel drive, 16 pneumatic tires on steel rim. 381 lbs 3,165.00 406 lbs 3,203.00 31 lbs 558.00 1,141.00 6506TR18 659711 6522 6 ft spreader with tractor hitch, end-wheel drive, 18 high floatation pneumatic tires on steel rim. 2. OPTIONAL FACTORY INSTALLED HYDRAULIC OR ELECTRIC SHUTOFF Hydraulic shut-off attachment in lieu of hand lever (factory installed-hydraulic hoses not included) (user supplies 1/4 hydraulic hoses from tractor to shutoff cylinder & 1/4 NPT fittings) Electric shutoff attachment, ordered in lieu of hand shutoff ( factory installed) 3. FIELD INSTALLED OPTIONS 107813 Bolt-on hole closures, one per opening. 21.00 107890 Deflectors for side dressing or bending. 4 oz 94.00 93.00 185214 4-ft. calibration pan. 1 lbs 1105214 5-ft. calibration pan. 6 lbs 97.00 1125214 6-ft. calibration pan. 7 lbs 101.00 Electric actuator shut-off attachment, retrofit. 6 lbs 1,204.00 Hydraulic shutoff attachment 31 lbs 558.00 657 Jiggler package, 4-ft. 8 lbs 171.00 658 Jiggler package, 5-ft. 8 lbs 195.00 659 Jiggler package, 6-ft. 9 lbs 218.00 1 295.00 4 549.00 26 lbs 393.00 50 lbs 527.00 6521 659711 4. REPLACEMENT TIRE PACKAGES, HUB & RIM 65A16 65A18 65A20 65A26 Apr-18 16 Wheel Package of two: Steel hub and rims, pneumatic tire 18 Wheel package of two: Steel hub and rims, 1 bore with 18 x 8.5 x 8 4-ply tubeless pneumatic tires (standard on 6-ft. spreader). 20 Wheel package of two: Steel hub and rims with 1-3/4 wide semi-pneumatic tires for higher clearance. 26 Wheel package of two: Steel hub and rims with 2 wide semi-pneumatic tires for higher clearance. Hub to adapt 15 x 15K rim for 6.70 x 15 tire for 6500 Series spreader. 2 required 6 lbs 261.00 R01-0015-020 Rim only, 15 x 5K for 6.70 x 15 tire for greater clearance 19 lbs 104.00 R02-0015-010 Tire only, 6.70 x 15, 4-ply rib tubeless for greater clearance. Order (2) per spreader 18 lbs 218.00 73.00 5. WEAR S 654-5 Bearing, end & center
6500 SERIES 4,5 & 6 ft Drop Spreader With 3PT Hitch Spreads Fertilizer, Granular Chemicals, Lime & Seed Standard Equipment: Hand lever shutoff standard (optional hydraulic or electric available) Precision-mated bottom & slide of cold milled steel Parking stand Adjustable angle spread plate Optional jigglers to aid flow of material Choice of 16, 18, 20 & 26 tires Polyester powder-coated baked-n finish, green 1. CHOOSE A SPREADER 6504PTH 4 ft spreader with 3 pt hitch and hand-lever shutoff. Choose a hydraulic or electric drive system in step #3 319 lbs 2,288.00 605PTH 5 ft spreader with 3 pt hitch and hand-lever shutoff. Choose a hydraulic or electric drive system in step #3 354 lbs 2,387.00 6506PTH 6 ft spreader with 3 pt hitch and hand-lever shutoff. Choose a hydraulic or electric drive system in step #3 39 2,457.00 31 lbs 558.00 1,141.00 2. OPTIONAL FACTORY INSTALLED HYDRAULIC OR ELECTRIC SHUTOFF 659711 6522 Hydraulic shut-off attachment in lieu of hand lever (factory installed-hydraulic hoses not included) (user supplies 1/4 hydraulic hoses from tractor to shutoff cylinder & 1/4 NPT fittings) Electric shutoff attachment, ordered in lieu of hand shutoff ( factory installed) 3. SELECT A HYDRAULIC OR ELECTRIC DRIVE SYSTEM 6512 *hydraulic drive package, less hoses for 3 pt hitch. (user supplies 1/4 hydraulic hoses from tractor to shutoff cylinder and 1/4 NPT fittings. 28 lbs 1,270.00 6513 Electric drive package, 12V for 3 pt hitch 28 lbs 1,446.00 21.00 4 oz 94.00 3. FIELD INSTALLED OPTIONS 107813 Bolt-on hole closures, one per opening. 107890 Deflectors for side dressing or bending. 6521 Electric actuator shutoff attachment, retrofit 1,204.00 185214 4-ft. calibration pan. 1 lbs 93.00 1105214 5-ft. calibration pan. 6 lbs 97.00 1125214 6-ft. calibration pan. 7 lbs 101.00 657 Jiggler package, 4-ft. 8 lbs 171.00 658 Jiggler package, 5-ft. 8 lbs 195.00 659 Jiggler package, 6-ft. 9 lbs 218.00 73.00 Specifications: Hole Size: 1 openings on all spreaders. 25 openings spaced 2.260 (5.7cm) on 5ft model; 30 openings spaced 2.188 (5.5cm) on 6 ft. Capacities: 4 ft, 4 cu ft (113 dm³) or approx 260 lbs (116 kg); 5-ft., 5 cubic foot (142 dm3 ) or approx. 32. (145 kg); 6-ft, 6 cu ft (170 dm³) or approx 390 lbs (174 kg) 6504 Overall Width: 16 tires=59, 18 tires=66, 20 & 26 tires=58 1/4 : 6505 Overall Width: 16 tires=71, 18 tires=78, 20 & 26 tires=70-1/4 6506 Overall Width: 16 tires=83, 18 tires=90, 20 & 26 tires=82-1/4 5. WEAR S 654-5 Bearing, end & center
6500 SERIES ASB 4,5 & 6 ft Drop Spreader With Adjustable Slotted Bottom For Spreading Agricultural Lime & Crumb Rubber Standard Equipment: Slotted, stainless steel bottom Specially designed rotor bar to agitate lime Choice of push-handle or tow-hitch on 4ft models Tow-hitch on 6ft model Choice of 16 or 18 pneumatic tirestires 1. CHOOSE A DROP SPREADER 6504ASB16H 4ft spreader, 260 lb approximate capacity with stainless steel adjustable slotted bottom, push-handle and 16 pneumatic tires on steel rims 230 lbs 2,790.00 6504ASB18H 4ft spreader, 260 lb approximate capacity with stainless steel adjustable slotted bottom, push-handle and 18 high floatation tires on steel rims 234 lbs 2,951.00 6504ASB16T 4ft spreader, 260 lb approximate capacity with stainless steel adjustable slotted bottom, tow-hitch and 16 pneumatic tires on steel rims 218 lbs 2,927.00 6504ASB18T 4ft spreader, 260 lb approximate capacity with stainless steel adjustable slotted bottom, tow-hitch and 18 high floatation tires on steel rims 24 3,088.00 6506ASB16T 6ft spreader, 390 lb approximate capacity with stainless steel adjustable slotted bottom, tow-hitch and 16 pneumatic tires on steel rims 27 3,232.00 6506ASB18T 6ft spreader, 390 lb approximate capacity with stainless steel adjustable slotted bottom, tow-hitch and 18 floatation tires on steel rims 277 lbs 3,407.00 2. REPLACEMENT TIRE PACKAGES, HUB AND RIM 65A16 16 Wheel package of two: steel hub and rims, pneumatic tire 1 295.00 65A18 18 Wheel package of two: steel hub and rims, 1 bore with 18 x 8.5 x 8 4-ply tubeless high-flotation pneumatic tires 4 549.00 Apr-18 Hub to adapt 15 x 5K for 6.70 x 15 tire for greater clearance 6 lbs 261.00 R01-0015-020 Rim only, 15 x 5K for 6.70 x 15 tire for greater clearance 19 lbs 104.00 R02-0015-010 Tire only, 6.70 x 15, 4-ply rib tubeless for greater clearance. Order 2 per spreader. 18 lbs 218.00 Bearing, center 73.00 Bearing, end 166.00 654-5 Aug-24 Specifications: Tires: Choice of 16 pneumatic tires or 18 high-flotation pneumatic tires on steel rim. Slot Size: 3-3/4 x 3/4 slotted openings spaced 1-inch apart and angled at 30-degrees. 12 openings on 4ft model and 19 openings on 6ft model. Capacities: 4 ft, 4 cu ft (113 dm³) or approx 260 lbs (116 kg); 6-ft, 6 cu ft (170 dm³) or approx 390 lbs (174 kg) Ground Clearance; 16 tires = 6, 18 tires = 7 6504 Wheel Spacing: 16 tires=51, 18 tires=58-1/2 6506 Wheel Spacing: 16 tires=75, 18 tires=87-1/2 3. JIGGLER OPTIONS 657 Jiggler package, 4-ft. 8 lbs 171.00 659 Jiggler package, 6-ft. 9 lbs 218.00 4. RETROFIT KITS FOR EXISTING 4 AND 6-FT SERIES 6524 Adjustable slotted bottom retrofit kit for existing 4-ft variable rate drop spreaders 1,364.00 6526 Adjustable slotted bottom retrofit kit for existing 6-ft variable rate drop spreaders 1,680.00
Turf Tender 24 Variable Rate Lawn Spreader Spreads fertilizer, granular chemicals, granular lime, seed & granular ice melts Standard Equipment: Adjustable stainless steel snap-off bottom and slide with triangular openings spaced 1 1/8 apart Positive shutoff lever closes shutter slide, stopping flow Steel tri-bar rotor gives internal agitation Spread plates on all models Bottom & slide snaps off for quick removal and cleaning Porous, oil-impregnated bearings Rate chart included Specifications: 24 hopper, 1.2 cu ft (33 dm³) volume, approx. 78 lbs (35 kg) capacity with fertilizer weighting 6 per cu ft. 20 openings, 30-1/2 wide with 12 tires and 35 wide with 13 tires. Powder coated steel hopper with stainless steel bottom and slide. Rate chart included. 1. CHOOSE A DROP SPREADER 24H12 24 drop spreader with push-handle, spread plate and 12 solid rubber tires 4 655.45 24H13 24 drop spreader with push-handle, spread plate and 13 pneumatic tires 4 755.00 4 lbs 35.00 2. FIELD INSTALLED OPTIONS & WEAR S 28128657 12 semi-pneumatic tire, carton of (1) 2813896 13 pneumatic tire package of (2) 10 lbs 184.00 28248584 Calibration pan, 24 spreader 4 lbs 91.00 2807953 Center bearing replacement 27.00 7 oz End bearing replacement 3 oz 9.00 28248725 Handle assembly, 24 spreader - replacement 138.00 90693 5508214 Hole closure 3 oz 6.00 28247259 Jigglers for 24 spreaders to eliminate bridging. Order (2) per spreader 104.00 28248785 Spread plate assembly, 24 spreader replacement 4 lbs 86.00 28248713 Tow hitch assembly, 24 spreader conversion pkg 137.00 28247968 Variable-rate bottom and slide for 24 spreader 144.00
Turf Tender 36 Variable Rate Lawn Spreader Spreads fertilizer, granular chemicals, granular lime, seed & granular ice melts www.gandy.com Standard Equipment: Adjustable stainless steel snap-off bottom and slide with triangular openings spaced 1 1/8 apart Positive shutoff lever closes shutter slide, stopping flow Steel tri-bar rotor gives internal agitation Spread plates on all models Bottom & slide snaps off for quick removal and cleaning Porous, oil-impregnated bearings Rate chart included 1. CHOOSE A DROP SPREADER 36H12 36 drop spreader with push-handle, spread plate and 12 solid rubber tires 5 741.00 36H13 36 drop spreader with push-handle, spread plate and 13 pneumatic tires 5 836.00 36T13 36 drop spreader with tractor hitch, spread plate and 13 semi-pneumatic tires 5 836.00 4 lbs 35.00 2. FIELD INSTALLED OPTIONS & WEAR S 28128657 12 semi-pneumatic tire, carton of (1) 2813896 13 pneumatic tire package of (2) 10 lbs 184.00 28368584 Calibration pan, 36 spreader 4 lbs 91.00 2807953 Center bearing replacement 27.00 7 oz End bearing replacement 3 oz 9.00 28368725 Handle assembly, 36 spreader 140.00 5508214 Hole closure 3 oz 6.00 28368759 Jigglers for 36 spreaders to eliminate bridging. Order (2) per spreader 113.00 56.00 90693 M10-0005-014 Plastic rain cover with elastic band for 36 spreader 28368785 Spread plate assembly, 36 spreader -replacement 90.00 28368713 Tow hitch assembly, 36 spreader replacement 4 lbs 138.00 28368768 Variable-rate bottom and slide for 36 spreader 178.00 Specifications: 36 hopper, 1.8 cu ft (49 dm³) volume, approx. 120 lbs (53 kg) capacity with fertilizer weighting 6 per cu ft. 30 openings, 30-1/2 wide with 12 tires and 35 wide with 13 tires. Powder coated steel hopper with stainless steel bottom and slide. Rate chart included.
Turf Tender 36 Fixed Rate Lawn Spreader Spreads granular lime, commercial compost & seed Standard Equipment: Choice of fixed-rate bottoms for spreading materials such as granulated lime & commercial compost Positive shutoff lever closes shutter slide, stopping flow Steel tri-bar rotor gives internal agitation Bottom & slide snaps off for quick removal and cleaning Porous, oil-impregnated bearings Specifications: 36 hopper, 1.8 cu ft (49 dm³) volume, approx. 120 lbs (53 kg) capacity. 46 wide. Powder 1. CHOOSE A DROP SPREADER 36H13FR 36 drop spreader with fixed-rate shutoff, push-handle and 13 pneumatic tires 5 730.00 28368752-16S Fixed-rate bottom, 1/4 slot, entire length, 36 spreader 4.2 64.00 28368752-20S Fixed-rate bottom, 5/16 slot, entire length, 36 spreader 4.2 64.00 28368752-28S Fixed-rate bottom, 7/16 slot, entire length, 36 spreader 4.2 64.00 28368752-32S Fixed-rate bottom, 1/2 slot, entire length, 36 spreader 4.2 64.00 28368752-48S Fixed-rate bottom, 3/4 slot, entire length, 36 spreader 4.2 64.00 28368752-64S Fixed-rate bottom, 1 slot, entire length, 36 spreader 4.2 64.00 28368752-96S Fixed-rate bottom, 1-1/2 slot, entire length, 36 spreader 4.2 64.00 2. CHOOSE A 36 FIXED-RATE SPREADER BOTTOM 3. FIELD INSTALLED OPTIONS & WEAR S 2813896 13 pneumatic tire package of (2) - replacement 10 lbs 184.00 28368584 Calibration pan, 36 spreader 4 lbs 91.00 2807953 Center bearing replacement 7 oz 27.00 End bearing replacement 3 oz 9.00 28368725 Handle assembly, 36 spreader 140.00 28368713 Tow hitch assembly, 36 spreader replacement 138.00 5508214 Hole closure 3 oz 6.00 28368759 Jigglers for 36 spreaders to eliminate bridging. Order (2) per spreader 113.00 34.00 56.00 90693 28114 Lever rate pkg to convert a 24 or 36 fixed-rate spreader to a variable rate spreader (requires bottom and slice - #28368768) M10-0005-014 Plastic rain cover with elastic band for 36 spreader 28368741 Shutoff spread plate and crank attachment for 36 spreader when used with a fixed-rate bottom 6 lbs 178.00 28368768 Variable-rate bottom and slide for 36 spreader 178.00
42 TURF TENDER SPREADER 42 Variable-Rate Lawn Spreader with Push Handle or Tractor Hitch Spreads fertilizer, granular chemical, granular lime, seed and granular ice melt Specifications: Capacity: 3.5cu ft (98 dm³), 22 (102 kg), with fertilizer weighing 6 per cu ft Openings: 36 triangular openings spaced 1 apart Overall Width: center-to-center wheel spacing 45-3/4 ; 48-1/2 with semi-pneumatic tire; 53-1/2 with pneumatic tire Overall Height: 30 Clearance: approx. 3-3/4 beneath spread plate with 16 tires 8-1/2 to hopper bottom approx 5-3/4 beneath spread plate with 20 tires 10-1/2 to hopper bottom 1. CHOOSE A DROP SPREADER 42H16 42 Turf Tender with push-handle, spread plate & 16 pneumatic wheels 9 1,302.00 42T16 42 Turf Tender with tractor hitch, spread plate & 16 pneumatic wheels 80 lbs 1,302.00 16 pneumatic wheel pkg of two with adapters-replacement 18 lbs 254.00 28A20716 20 semi-pneumatic wheels of two with adapters-replacement 29 lbs 360.00 28A26716 26 semi-pneumatic wheels of two with adapters-replacement 50 lbs 518.00 28428584 Calibration pan, 42 6 lbs 90.00 2807953 Center bearing 70 oz 27.00 28A426919 Cover assembly for 42 Turf Tender 9 lbs 186.00 090633-C1 End bearing 5 oz 38.00 Handle assembly 1 207.00 Handle for use in place of tractor hitch (uses existing holes) 7 lbs 155.00 Hole closure 3 oz 6.00 28427159-1 Jigglers, left to eliminate bridging (requires left & right) 75.00 28427159-2 Jigglers, right, to eliminate bridging (requires left & right) 75.00 Tow hitch assembly 17 lbs 200.00 284295108 Tractor hitch for use in place of handle 7 lbs 155.00 2808942-7 Variable-rate bottom and slide, for 42 spreader 207.00 2. FIELD INSTALLED OPTIONS AND WEAR S 2816896 42H-A 284295109 5508214 42T-A Standard Equipment: Adjustable variable-rate stainless steel bottom and slide with triangular openings Bottom& slide snaps off for quick removal and cleaning Positive shutoff lever closes slide Spread plates on all models Steel tri-bar rotor gives internal agitation Porous, oil-impregnated bearings
TURF TENDER 42 Variable-Rate Lawn Spreader with Optional 3PT Hitch Spreads fertilizer, granular chemicals, granular lime, seed & granular ice melts 1. CHOOSE A DROP SPREADER 2842PTH 42 drop spreader with parking stand and two, 12-volt electric motor drives 2. CHOOSE A 3PT HITCH OPTIONS 20 2,206.00 (NOT REQUIRED IF YOU WANT TO JUST USE PARKING STANDS) 2892 Cat 0, 3pt hitch (2842PTH only) 3 195.00 2305880 Cat 1, 3pt hitch (2842PTH only) 5 350.00 6 lbs 90.00 3. FIELD INSTALLED OPTIONS AND WEAR S 28428584 Calibration pan, 42 2807953 Center bearing 7 oz 27.00 Cover (2842PTH only) 9 lbs 164.00 090633-C1 End bearing 5 oz 38.00 5508214 Hole closure 2891-D 3 oz 6.00 28427159-1 Jigglers, left to eliminate bridging (requires left & right). 75.00 28427159-2 Jigglers, right, to eliminate bridging (requires left & right) 75.00 207.00 2808942-7 Variable-rate bottom and slide, for 42 spreader Standard Equipment: Adjustable variable-rate stainless steel bottom and slide with triangular openings Bottom& slide snaps off for quick removal and cleaning Hand-lever shutoff Steel tri-bar rotor gives internal agitation Two, 12-volt electric motors provide internal agitation Porous, oil-impregnated bearings Disassembles for easy cleaning
Turf Tender 42 Fixed Rate Lawn Spreader Spreads granular lime, commercial compost & seed Standard Equipment: Spread-plate shutoff mechanism Porous, oil-impregnated bearings All models disassemble for easy cleaning 42H16FR 42 drop spreader with push-handle, spread plate and 16 pneumatic tires 9 1,247.00 42T16FR 42 drop spreader with tow hitch, spread plate and 16 pneumatic tires 9 1,237.00 28427852-12S Fixed-rate bottom, 3/16 slot, entire length 5.2 64.00 28428752-16S Fixed-rate bottom, 1/4 slot, entire length 5.2 64.00 28428752-20S Fixed-rate bottom, 5/16 slot, entire length 5.2 64.00 28427852-24S Fixed-rate bottom, 3/8 slot, entire length 5.2 64.00 28427852-28S Fixed-rate bottom, 7/16 slot, entire length (mulched seeds) 5.2 64.00 28427852-32S Fixed-rate bottom, 1/2 slot, entire length 5.2 64.00 28427852-40S Fixed-rate bottom, 5/8 slot, entire length 5.2 64.00 28427852-48S Fixed-rate bottom, 3/4 slot, entire length 5.2 64.00 28427852-64S Fixed-rate bottom, 1 slot, entire length 5.2 64.00 28427852-96S Fixed-rate bottom, 1-1/2 slot, entire length 5.2 64.00 2. CHOOSE A 36 FIXED-RATE SPREADER BOTTOM 3. FIELD INSTALLED OPTIONS & WEAR S 28428584 Calibration pan, 42 6 lbs 90.00 2807953 Center bearing replacement 7 oz 27.00 28A426919 Cover assembly for 42 Turf Tender 9 lbs 186.00 284294102 Crank attachment for fixed-rate bottoms, 42H spreaders 7 lbs 73.00 28494101 Crank attachment for fixed-rate bottoms, 42T spreaders 5 oz 90.00 090633-C1 End bearing, 42 spreader 5 oz 38.00 28427225 Handle for use in place of tow hitch with fixed-rat bottom. Note: must have pole on spreader. 10 lbs 204.00 5508214 Hole closure 3 oz 6.00 28427159-1 Jigglers for 42 spreaders to eliminate bridging. Order (2) per spreader 75.00 28427159-2 Jigglers for 42 spreaders to eliminate bridging. Order (2) per spreader 75.00 71.00 28113 Lever pkg for rate adjustment of 42 variable rate bottom & slide when used with fixed-rate shutoff models ending in FR. (requires variable rate bottom & slide, #2808942-7) 28427013 Tractor hitch for used in place of handle with fixed-rate bottom 7 lbs 152.00 2808942-7 Variable-rate bottom and slide, ordered as an option for 42 FR spreader 207.00 1. CHOOSE A DROP SPREADER
www.eurospand.it EUROSPAND (O.M.B.) BROADCAST FERTILIZER & SALT SPREADER Capacity: 200 lt / 53 gal Steel hopper with powder coat paint Spreading width, up to 30 ft Independent levers for spreading Adjustable spreading vanes 490 & 890 PXT Ercole Capacity: 800 lt - 1200 LT stainless steel hopper (fertilizer version) - hot S273L galvanized chassis plus two powder coatings layers (salt version) Spreading width 18 meters Hydraulic control Note: Fertilizer Tank Capacity is based on fertilizer that has a density of 64 lbs/cubic ft A different density will change what the fertilizer tank can hold. Model Number Description List Price Single Disc Spreader 3-point hitch steel fertilizer spreader with PTO shaft - 200 lt capacity, approx 440 lbs Spreading disc has adjustable vanes to allow accurate & uniform spread for all types of fertilizer. 675.00 A002.001 Agitator for S273L 64.00 G006.005 Deflector to limit the spreading width for S273L 228.00 S273L A002.019 Ercole, 3-point - single disc - stainless steel spreader with filtering grid to brake up lumps, with hydraulic control - 800 lt (approx 1,760 lbs), 1,000 lt (approx 2,200 lbs & 1,200 lt (approx 2,640 lbs ) ft capacity Agitator for Ercole fertilizer spreader 85.00 R002.089 200 lt Stainless Steel extension 369.00 S935.002 3,497.00 Capacity: 400 lt, 800 lt Stainless Steel hopper Spreading width: from 4 to 12 meters Opening: Manual or Hydraulic Linkage: Cat l and ll Single Disc Salt Spreader S935.004 Ercole, 3-point - single disc spreader with 420 rpm reduced gearbox - hot galvanized chassis plus two powder coating layers, with filtering grid to brake up lumps, with hydraulic control - 800 lt (approx 1760 lbs), 1,000 lt (approx 2200 lbs), & 1,200 lt (approx 2640 lbs), capacity. 4,871.00 A002.023 Agitator for Ercole salt spreader 103.00 Pendulum Spreaders 490PXT INOX Pendulum type 3-point spreader with stainless steel hopper & filtering grid to brake up lumps - a capacity of 400 lt (approx 880 lbs), spread width 4 to 12 meters 890PXT INOX Same as above but with a 800 lt approx 1760 lbs) stainless steel tank. 3,813.00 A002.009 Agitator for 490-890PXT 87.00 G010.044 Hydraulic remote control for 490 890PXT 329.00 2,398.00
www.eurospand.it EUROSPAND (O.M.B.) BROADCAST FERTILIZER SPREADER & SEEDER Capacity: 600 lt,- 1,000 lt Powder coat or stainless steel hopper Spreading width: row-localized distribution David Note: Fertilizer Tank Capacity is based on fertilizer that has a density of 64 lbs/cubic ft A different density will change what the fertilizer tank can hold. Model Number Description List Price Double Disc Spreaders Twin disc spreader with 600-1000 lt capacity (approx 1,320-2,200 lbs), powder coated paint, Vibro System, left & right hydraulic control - made for narrow passages between plants in rows David spreading width up to 15 meters S926.003 Stainless Steel - Twin disc spreader with 600-1000 lt capacity (approx 1,320-2,200 lbs),, powder coated paint, Vibro System, left & right hydraulic control - made for narrow passages between David Inox plants in rows- spreading width up to 15 meters S926.001 Twin disc spreader with 600-1000 lt capacity (approx 1,320-2,200 lbs),, powder coated paint, Vibro System, left & right hydraulic control - made for narrow passages between plants in rows David Fruit row localized distribution from 2 - up to 5 meters - open field distribution up to 12 meters S926.007 Stainless Steel - Twin disc spreader with 600-1000 lt capacity (approx 1,320-2,200 lbs),, powder David Fruit coated paint, Vibro System, left & right hydraulic control - made for narrow passages between plants in rows - localized distribution from 2 - up to 5 meters - open field distribution up to 12 meters Inox S926.006 Jolly 28 Twin disc spreader with 1600 lt - 3000 lt capacity (approx 3,520-6,600 lbs), stainless steel grid, Vibro System, left & right hydraulic control, tilting hopper working width up to 28 meters, 540 RPM Stainless Steel - Twin disc spreader with 1600 lt - 3000 lt capacity (approx 3,520-6,600 lbs),, Jolly 28 Inox stainless steel grid, Vibro System, left & right hydraulic control, tilting hopper working width up to 28 meters, 540 RPM. Jolly 32 Twin disc spreader with 1600 lt - 3000 lt capacity (approx 3,520-6,600 lbs),, stainless steel grid, Vibro System, left & right hydraulic control, tilting hopper working width up to 32 meters, 1000 RPM Stainless Steel - Twin disc spreader with 1600 lt - 3000 lt capacity (approx 3,520-6,600 lbs),, Jolly 32 Inox stainless steel grid, Vibro System, left & right hydraulic control, tilting hopper working width up to 32 meters, 1000 RPM.. SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER Capacity: 600 lt,- 1,000 lt Powder coat or stainless steel hopper Spreading width: up to 15 meters Left & right hydraulic control Linkage: Cat ll from 2-5 meters or open filed distribution up to 12 meters Left & right hydraulic control Jolly Linkage: Cat ll David Fruit Capacity: 1600 lt - 3000 lt Powder coat or stainless steel hopper Spreading width: 28 to 32 meters Left and right hydraulic control Linkage: Cat ll SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER These Spreaders Are Special Order only Not Regular Stock Items Please Call for More Information