MEDIUM DUTY DISC PADS

The Fleet s First Choice Because Medium Duty is Not Moderate Duty Medium duty is not moderate duty. Medium duty applications which include stop-andgo delivery vehicles, utility trucks and school buses are the most severe applications for hydraulic pads. So fleets need pads engineered to deliver the best braking and longest life under the most rigorous conditions. wwww} MULTIPLE GRADES LOW NOISE HIGH ENDURANCE FMVSS105 COMPLIANT MEDIUM DUTY DISC PADS

A-LINE GC Series Pads Engineered for Medium Duty } Manufactured with a proprietary high endurance semi-metallic and Resilient Graphite Carbon (RGC) formulation, A-LINE pads are designed for superior performance in heavy load, stop-and-go, and rough terrains. A-LINE knows that different applications require different friction grades. That s why we have created the GC1 and GC2 friction formulations. For lighter vehicles and less rigorous terrain, specify GC1. For heavier vehicles with demanding stop and go on severe terrain, specify our GC2 friction. Our broad coverage of part numbers makes A-LINE pads the fleet s preferred choice for applications like: Utility Trucks School Buses Delivery Vans Cargo Trucks Emergency Vehicles Two-Year Warranty All A-LINE pads come with a two-year limited warranty protection against defects in parts and workmanship. Ask your distributor for more details. The Fleet s First Choice

The Fleet s First Choice GC1 Brake Effectiveness Torque (lb*ft) 12000 10000 8000 6000 4000 GC Series Medium Duty Hydraulic Pads Yield Higher Torque A-Line s GC series medium duty hydraulic pads are engineered for high torque and immediate stopping in even the most severe conditions. 2000 0 0 500 1000 1500 Pressure (psi) Pre-Burnish Effectiveness 30 mph Pre-Burnish Effectiveness 60 mph Post-Burnish Effectiveness 30 mph Post-Burnish Effectiveness 60 mph Post-Fade Effectiveness 30 mph Light Load Effectiveness 60 mph Heavy Load Effectiveness 60 mph Post-Fade Effectiveness 60 mph GC2 Brake Effectiveness 2000 2500 At Left Top: A-LINE GC1 friction produces torque output of up to 8,400 lb-ft of torque when lightly loaded at 30 mph. GC1 pads yielded more than 6,500 lb-ft of torque when heavily loaded at 60 mph. This shows that GC1 is ideal for medium duty vehicles that need high torque in demanding road conditions. Torque (lb*ft) 12000 10000 8000 6000 4000 2000 0 0 500 1000 Pressure (psi) 1500 2000 2500 At Left Bottom: A-LINE GC2 friction produces nearly 10,000 lb-ft of torque when lightly loaded at 60 mph, and 7,800 lb-ft of torque when heavily loaded at 60 mph. These performance characteristics are perfect for extreme medium duty loads operating in extreme terrains and stop and go conditions. Pre-Burnish Effectiveness 30 mph Post-Burnish Effectiveness 30 mph Post-Fade Effectiveness 30 mph Pre-Burnish Effectiveness 60 mph Post-Burnish Effectiveness 60 mph Light Load Effectiveness 60 mph Heavy Load Effectiveness 60 mph Post-Fade Effectiveness 60 mph

A-Line GC1 Standard Duty For Superior Brake Life, Dependable Stopping A-LINE s GC1 friction formulations are a proprietary blend of semi-metallic and Resilient Graphite Carbon (RGC) for the medium duty fleet that wants dependable stopping without compromising brake or rotor life. GC1 is positive molded with a high Nothing tests a medium duty friction like the severe applications of steep terrain and stop-and-go traffic. A-LINE s GC2 uses the same foundation of RGC formulation and then ups the ante with a high thermal-resistant phenolic resistant to withstand the A-Line Part Number ALP184-GCx D184-7806 ALP224-GCx D224-7807 ALP225-GCx D225-7808 ALP236-GCx D236-7809 ALP769-GCx D769-7636 ALP786-GCx D786-7655 ALP786A-GCx FMSI # Description Manufacturer Model Years D786A-7654 ALP825-GCx D825-7697 ALP827-GCx D827-7699 ALP1062-GCx D1062-7968 ALP1066-GCx D1066-7972 yield strength Q354 backing plate to support the high temperature resistant GC formulation. Recommended for all Class 4-7 vehicles, including: school buses, cargo trucks, delivery vans, emergency vehicles, and utility vehicles. rigors of heavy loads compounded by stop-and-go traffic and steep terrain. This severe duty friction delivers 22% more torque than GC1 and ranks among the best in the industry. Bendix-style 2.6 single piston hydraulic caliper 55314. Dayton-style 2.5 single piston hydraulic caliper 55251. Bendix-style 2.88 single piston hydraulic caliper 55250. Bendix-style 2.88 single piston hydraulic caliper 55252. Meritor-style 70mm quad piston hydraulic caliper. Complete Axle Set of Medium Duty Hydraulic Pads (Thick Friction). Fits Bosch-style 73mm dual piston hydraulic caliper 55850. Complete Axle Set of Medium Duty Hydraulic Pads (Thin Friction). Fits Bosch-style 66mm dual piston hydraulic caliper 55849. Complete Axle Set of Medium Duty Hydraulic Pads (Thin Friction). Fits Bosch-style 54mm dual piston hydraulic caliper. Complete Axle Set of Medium Duty Hydraulic Pads (Thin Friction). Fits Bosch-style 57mm dual piston hydraulic caliper. TRW-style twin piston 60mm hydraulic caliper. LRG714 (right), LRG715 (Left) TRW-style twin piston 60mm caliper E14670076 (Right), E14670077 (Left) Premium Duty GC1 Severe Duty GC2 Freightliner, IHC, Thomas 1990-2004 4 4 Ford, GM, Meritor 1979-2008 4 Freightliner, IHC, Thomas 1979-2008 4 Ford 1983-1999 4 Bluebird, Ford, Freightliner, GM, Hino, IHC, Sterling, Thomas Freightliner, IHC, Sterling, Thomas Freightliner, IHC, Sterling, Thomas Suggested Terrain Flat Terrain Stop-and-go A-Line GC2 Premium Duty for Rough Terrain, Demanding Loads Flat Terrain Stop-and-go 2009-2017 4 4 1998-2017 4 4 1985-2017 4 4 Chevrolet, GMC, Isuzu 1998-2015 4 Chevrolet, GMC, Isuzu 1998-2015 4 Hino 145, 165, 185 2003-2010 4 Ford, IHC TerraStar 2005-2017 4 4 ALP1683-GCx D1683-7699 Complete Axle Set of Medium Duty Hydraulic Pads. Hino 195 2013-2017 4 ALP1695-GCx D1695-7697 Complete Axle Set of Medium Duty Hydraulic Pads. Hino 155 (Canada) 2012-2017 4 Hilly Terrain Suggested Terrain Hilly Terrain Mountain Terrain In the above A-LINE Part Numbers, replace the x in GCx with the proper friction grade designation GC1 for premium duty or GC2 for severe duty.

The Fleet s First Choice A-LINE GC2 Hydraulic Pads 100% Canadian Made For Superior Performance Medium duty brakes are not just a category between light duty and heavy duty, they are the most severe duty applications for hydraulic brake pads. So A-LINE teamed up with the experts in North America s harshest environments to engineer our superior GC semi-metalsemi-metallic formulation for the most severe hydraulic pads. Using 100% North American source materials, our Canadian manufacturers not only created a formulation designed to provide excellent braking and reduced wear, but will also remain quieter with every application. Quality brake pads are manufactured as a braking system not as a component. A-LINE GC2 pads start with premium high endurance formulations, then add a patented NuCap NRS backing plate with patented high-torque retention systems, and finish with precision compression and grinding so you receive the highest standards in brake geometry. Quality engineering and manufacturing is why A-LINE is the Fleet s First Choice. NuCap NRS Superior Retention Systems Superior friction is not enough! A-LINE GC2 pads are engineered to withstand the most rigorous torque and temperature applications without shear or friction peel that leads to premature failure. Every GC2 backing plate uses the NuCap patented NRS retention system that allows our positive molded pads to completely surround the multi-directional hook retainers so the fric-tion and backing plate remain an integrated unit even in the most severe applications. Bendix, Bluebird, Bosch, Dayton, Ford, Freightliner, GM, Hino, IHC, Isuzu, Meritor, Sterling, Terrastar, Thomas, TRW and any other brand names are the respective intellectual property of their repsective parent corporations and are used for reference purposes only. A-LINE is a registered trademark of Ascent Tranz Group, LLC. The user of this information should not infer any ownership or affiliation of A-LINE with any of the aforementioned companies or brands. 2017 Ascent Tranz Group, LLC. The material in this document is copyrighted any may not be distributed in any form without the express written permission of Ascent Tranz Group, LLC.

A-LINE Medium-Duty Hydraulic Pad ID Chart 184 Mold Pad ALP184-GCx ALP225-GCx Fits Bendix-style 2.6 single piston hydraulic caliper 55314 Freightliner - International - Thomas Fits Bendix-style 2.88 single piston hydraulic caliper 55250 Freightliner - International - Thomas 254mm 10.03 in. 269.5mm 10.61 in. 184 Tab 97.5 mm 3.83 in. 100 mm 3.93 in. 80 mm 3.15 in. 20.83 mm 22.3mm 8.07 in..87 in. 205.0 mm 16mm 0.63 in. 225 Tab 205.0 mm 8.07 in. 80 mm 3.15 in. 20.83 mm 1.04 in. Fits Meritor-style 70mm quad piston hydraulic caliper Bluebird - Freightliner - GM - Sterling - Thomas 26.5 mm ALP769-GCx.85 in. ALP224-GCx Fits Dayton-style 2.5 single piston hydraulic caliper 55251 Ford - GMC - Meritor 21.8mm D769 Large House 240.0 mm 8.55 in. 101.58 mm 3.96 in. 88.64 mm 3.49 in. 213.4mm Fits Bendix-style 2.88 single piston hydraulic caliper 55252 Ford 25.2 mm D786A Wing Thick ALP236-GCx 1.0 in..73 in. ALP786-GCx (Thick Friction) Fits Bosch-style 73mm dual piston hydraulic caliper 55850 Freightliner - International - Sterling -Thomas 244.1 mm 9.61 in. 102.6 mm R10 4.04 in. 85.09 mm 3.35 in. R130.3 228.6 mm 25.1 mm.98 in. 9.00 in. 1.05 in. 786 Thick 26.8 mm R10 R10 D236 Small house 18.5 mm 8.40 in.

D786A Wing Thick ALP786A-GCx (ThinFriction) Fits Bosch-style 66mm dual piston hydraulic caliper 55849 Freightliner - International - Sterling -Thomas Spec Your A-Line Friction After you identify your part number, replace the x in GCx with the proper friction grade number. 244.1 mm 9.61 in. GC1 Premium Medium Duty applications in light to demanding terrain. GC2 Severe Medium Duty applications in the most severe terrain. 85.09 mm 3.35 in. D825 20.3 mm 0.80 in. 786A Thin 26.8 mm 1.05 in. 786 Thick ALP825-GCx D1066 Claw ALP1066-GCx Fits Bosch-style 54mm twin piston hydraulic caliper Chevrolet - GMC - Hino Fits TRW-style single piston 60mm hydraulic caliper E14670076-7 International Terrastar - Ford 222.0 mm 8.74 in. 75.0 mm 2.95 in. 64.5 mm 2.54 in. D1683 206.1 mm D1695 20 mm ALP827-GCx 0.78 in. D827 19.8 mm.77 in. 8.11 in. ALP1683-GCx Fits Meritor-style four piston hydraulic caliper Hino 195 Fits Bosch-style 57mm twin piston hydraulic caliper Chevrolet - GMC - Hino 210.0 mm 8.25 in. 76.6 mm 3.01 in. D1062 WIng Thin 76.6 mm 3.02 in. 210.3 mm 0.78 in. ALP1062-GCx 19.8 mm 19.8 mm.77 in. 8.28 in. Fits Meritor-style double piston 60mm hydraulic caliper Hino 145, 165, 185 ALP1695-GCx Fits double piston hydraulic caliper Hino 155 (Canada) 206.25 mm 174.5 mm 6.87 in. 8.121 in. 74.8 mm 2.95 in. 86.0 mm 0.783 in. 19.9 mm.84 in. 21.5 mm 3.38 in.

Durable Engineering For All Your Medium Duty Braking Needs Class 4-7 Delivery Vehicles Cargo Trucks School Bus Emergency Vehicles Utility Vehicles The Fleet s First Choice 5620 West 51st Street Forest View, IL 60638 225 Sheldon Drive, Unit 13 Cambridge, Ontario N1T 1A1 Toll Free 844-4AIR DISC (424-7347) www.a-lineparts.com Pub. ALHP71014 Reorder Part No. ALHDPB9