2
SPECIFICAIONS Power Plant Model: HINO J08E-UV ype: 4 cycle, water-cooled, vertical in-line 6, direct injection, turbo-charger, intercooler Complies with US EPA ier Interim ier IV and NRMM (Europe) Stage IIIB Displacement: 469 cu in (7.684 liters) Power: 2 HP/2,00 rpm (23 kw/2,00 min - ) Max. torque: 7 lbf ft /,0 rpm (,07 N m/,0 min - ) Cooling system: Water-cooled Starter: 24V-5kW Radiator: Corrugated type core, thermostatically controlled Air cleaner: Dry type with replaceable paper element hrottle: wist grip type hand throttle, electrically actuated Fuel filter: Replaceable paper element Batteries: wo 2V x 36 Ah/5HR capacity batteries, series connected Fuel tank capacity: 06 US gal. (0 liters) Hydraulic System Main pumps: 3 variable displacement piston pumps Control: Full-flow hydraulic control system for infinitely variable pressure to all winches, propel and swing. Controls respond instantly to the touch, delivering smooth function operation. Cooling: Oil-to-air heat exchanger (plate-fin type) Filtration: Full-flow and bypass type with replaceable element Electrical system: All wiring corded for easy servicing, individual fused branch circuits. Max. relief valve pressure: hoist, boom hoist and propel system: 4,626 psi (3.9 MPa) Swing system: 3,989 psi (27.5 MPa) Control system: 783 psi (5.4 MPa) Hydraulic tank capacity: 4.3 US gal. (535 liters) Hoisting System Powered by a hydraulic motor through a planetary reducer. Brake: A spring-set, hydraulically released multiple-disc brake is mounted on the boom hoist motor and operated through a counter-balance valve. Drum lock: External ratchet for locking drum Drum: Single drum, grooved for 25/32 inch ( mm) dia. wire rope Line speed: Single line on first drum layer Hoisting/Lowering: 57 to 6.6 ft/min (48 to 2 m/min) Diameter of wire rope Main winch: -/32 in. x 3 ft (26 mm x 2 m) Aux. winch: -/32 in. x 7 ft (26 mm x 235 m) hird winch: -/32 in. x 623 ft (22 mm x m) hoisting/lowering: 25/32 in. x 9 ft ( mm x m) guy line: -/32 in. (34 mm) backstops: Required for all boom length Hoist System Front and rear drums for load hoist powered by a hydraulic variable plunger motors, driven through planetary reducers. Negative brake: A spring-set, hydraulically released multipledisc brake is mounted on the hoist motor and operated through a counter-balance valve. (Positive free fall brake is optional) Drum lock: External ratchet for locking drum Drums: Front drums: 2 ft 3/6 inch (64 mm) P.C.D x 2ft 9/32 inch (67 m) Lg., grooved for -/32 inch (26 mm) wire rope. Rope capacity is 3 ft (2 m) working length and,8 ft (36 m) storage length. Rear drums: 2 ft 3/6 inch (64 mm) P.C.D x 2ft 9/32 inch (67 m) Lg., grooved for -/32 inch (26 mm) wire rope. Rope capacity is 7 ft (230 m) working length and,8 ft (36 m) storage length. Line speed: Single line on the first layer Hoisting/Lowering: 394 to 0 ft Line pull: Max. line pull (Single line): 46,0 lbs (8 kn) line pull: 25,000 lbs (08 kn) Swing System Swing unit is powered by hydraulic motor driving spur gears through planetary reducers (2 set), the swing system provides 3 rotation. Swing parking brakes: A spring-set, hydraulically released multiple-disc brake is mounted on swing motor. Swing circle: Single-row ball bearing with an integral internally cut swing gear. Swing lock: Manually, four position lock for transportation Swing speed: 3.2 rpm (min - ) Upper Structure orsion-free precision machined upper frame. All components are located clearly and service friendly. Engine will with low noise level. Counter weight: 7 lbs Cab & Control otally enclosed, full vision cab with safety glass, fully adjustable, high backed seat with a headrest and armrests, and intermittent wiper and window washer (skylight and front window). 3
Cab fittings: Air conditioner, convenient compartment (for tool), cup holder, ashtray, cigarette lighter, sun visor, roof blind, tinted glass, floor mat, footrest, shoe tray, and foot acceleration pedal. Controls: Four adjustable levers for front drum, rear drum, boom drum and swing controls. Lower Structure Steel-welded carbody with axles. Crawler assemblies are designed with quick disconnect feature for individual removal as a unit from axles. Crawler belt tension is maintained by hydraulic jack force on the track adjusting bearing block. Carbodyweight: 4,300 lbs Crawler drive: Independent hydraulic propel drive is built into each crawler side frame. Each drive consists of a hydraulic motor propelling a driving tumbler through a planetary gear box. Hydraulic motor and gear box are built into the crawler side frame within the shoe width. Crawler brakes: Spring-set, hydraulically released parking brakes are built into each propel drive. Steering mechanism: A hydraulic propel system provides both skid steering (driving one track only) and counter-rotating steering (driving each track in opposite directions). rack rollers: Sealed track rollers for maintenance-free operation. Shoe (flat): 2 ft in wide each crawler Max. gradeability: % Weight Including upper and lower machine, 7 lbs counterweight and 4,300 lbs carbody weight, basic boom (or basic boom + basic jib), hook, and other accessories. Weight: 2,300 lbs (02 t) Ground pressure: 3.6 psi (.4 kpa) Attachment and Jib: Welded lattice construction using tubular, high-tensile steel chords with pin connections between sections. and Jib Length Min. Length Max. Length (Min. Combination) (Max. Combination) Crane ft 230 ft Fixed Jib ft + 30 ft 0 ft + ft Main Specifications (Model: CK0G) Crane Max. Lifting Capacity Length Fixed Jib Max. Lifting Capacity Max. Length Max. Combination Power Plant Model Engine Output Fuel ank Capacity Main & Aux. Winch Max. Line Speed Line Pull (single Line) Wire Rope Diameter Brake ype 2,000 lbs ~ 230 ft 24,000 lbs ft 0 ft + ft HINO J08E-UV 2 HP/2,00 rpm 06 US gal. (0 liters) 3 ft/min ( m/min): st layer 25,000 lbs (08 kn) -/32 in (26 mm) Spring set hydraulically released (Negative) Working Speed Swing Speed ravel Speed Hydraulic System Main pumps Max. Pressure Hydraulic ank Capacity Weight Operating Weight Ground Pressure Counterweight ransport Weight 3.2 rpm (min - ) 0.86/0.62 mph 3 variable displacement 4,626 psi (3.9 MPa) 4.3 US gal. (535 liters) 2,300 lbs (02 t) 3.6 psi (.4 kpa) 7 lbs 74,6 lbs 4
GENERAL DIMENSIONS Unit: ft-in (mm) 9 0 (2,9) 4 (,4) 3 (9) 24 2 (7,3) 6 (3,0) 4 2 (,2) 6 8 (2,030) 7 3 (2,0) 4 6 (4,430) 2 (0) R5 (4,8) (6,0) (3,3) 3 7 (,00) Basic : (5,2) 6 (4) 9 (5,0) 22 3 (6,7) 6 (3,0) (Crawler Retracted) 7 5 (5,300) (Crawler Extended) 5
BOOM AND JIB ARRANGEMENS Crane Arrangements length ft (m) arrangement length ft (m) arrangement (5.2) B (48.8) B 0 A (8.3) (2.3) B 0 B 0 0 B (5.8) B 0 0 A B A B A (24.4) B 0 (54.9) B 0 B 0 A A (27.4) B 0 0 B (57.9) B 0 0 A B 0 0 A B A B A 00 (30.5) B 0 0 (6.0) B 0 A B 0 A 0 (33.5) B 0 0 B 0 0 B A A (64.0) 2 (67.) B 0 0 A B A B 0 A (36.6) B 0 A 230 (.) B 0 0 A 30 (39.6) (42.7) (.7) B 0 0 A B B B 0 B 0 A A A B 0 0 A B 0 0 A B A A Symbol 0 A B Length 25.0 ft (7.6 m) 25.0 ft (7.6 m) 0.0 ft (3. m).0 ft (6. m).0 ft (2.2 m).0 ft (2.2 m) Remarks Base op Insert Insert Insert Insert for Luffing mark shows the guy line installing position when the fixed jib is used. indicates the most flexible combination of insert luffing booms, which can be modified to form all shorter luffing boom arrangements. Fixed Jib Arrangements Fixed Jib Crane boom length Jib length ft (m) 30 (9.) Jib arrangement B ft (27.4 m) (2.2) B 0 0 ft (6.0 m) (5.2) (8.3) (2.3) B B 0 B 0 0 B Symbol B 0 Jib Length 5 ft (4.6 m) 5 ft (4.6 m) 0 ft (3.0 m) ft (6. m) Remarks Jib Base Jib op Insert Jib Insert Jib 6
WORKING RANGES Main 7
Fixed Jib 0 8
WORKING RANGES Fixed Jib 30 9
SUPPLEMENAL DAA. loads included in the charts are the maximum allowable freely suspended loads at a given boom length, boom angle and load radius, and have been determined for the machine standing level on firm supporting surface under ideal operating conditions. he user must limit or de-rate rated loads to allow for adverse conditions (such as soft or uneven ground, out-oflevel conditions, wind, side loads, pendulum action, jerking or sudden stopping of loads, inexperience of personnel, multiple machine lifts, and traveling with a load). 2. Capacities do not exceed % of minimum tipping loads. Capacities based on factors other than machine stability such as structural competence are shown by asterisk * in the charts. 3. he machine must be reeved and set-up as stated in the operation manual and all the instruction manuals if these manuals are missing, obtain replacements. backstops are required for all boom lengths. Gantry must be fully raised position for all operations. Crawlers must be fully extended and be locked in position. he crane must be leveled to within % on a firm supporting surface. 4. Do not attempt to lift where no ratings are shown as crane may tip or collapse. 5. Attempting to lift more than rated loads may cause machine to tip or collapse. Do not tip machine to determine capacity. 6. Weight of hooks, hook blocks, slings and other lifting devices are a part of the total load. heir total weight must be subtracted from the rated load to obtain the weight that can be lifted.. he boom should be erected over the front of the crawlers, not laterally. When electing and lowering the boom at length of 0 ft (6.0 m) with jib, the blocks for erection must be placed at the end of the crawlers. 2. Least stable position is over the side. 3. Maximum hoist load for number of reeving parts of line for hoist rope. Main Hoist s No. of Parts of Line 2 3 4 5 Maximum s 25,000,000,000 00,000 25,000 No. of Parts of Line 6 7 8 9 0 Maximum s,000,000 0,000 225,000 2,000 Jib Hoist s No. of Parts of Line Maximum s 24,000 Auxiliary Hoist s No. of Parts of Line 2 Maximum s 25,000,000 4. Lifting capacities listed apply only to the machine as originally manufactured and designed by KOBELCO CRANES CO.,LD. Modifications to this machine or use of equipment other than that specified can reduce operating capacity. 5. Designed and rated to comply with ANSI Code B30.5. Operation of this equipment in excess of rated loads or disregard of instruction voids the warranty. 7. When lifting over boom point with jib or auxiliary sheave, rated loads for the boom must be deducted as shown below. Jib length Aux. 30' ' ' ' ' Deduct 0 2,0 3,0 4,0 5,0 6,0 8. he total load that can be lifted over a jib is limited by rated jib loads. 9. lengths for jib mounting are ft (27.4 m) to 0 ft (6.0 m). 0. lengths that can attach auxiliary sheave are from ft (5.2 m) to 2 ft (67. m). 0
LIFING CAPACIY Crane Lifting Capacity Unit: lbs Counterweight: 7 lbs, Carbody weight: 4,300 lbs 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0.0 22.0 24.0 26.0 28.0.0 ' ' ' 8.4.2 79.0 76.7.5 74.3 73. 7.9 69.5 67.0 64.4 6.8 59.2 56.4 53.6.7 47.6 44.3 35.2 3 2,000 * 2,000 * 6,000 * * 7 * 63,000 *,000 * 42,00 * 35,000 * 22,0 *,0 99,0 89,0 8,00 74,0 6 63,0 58,0,00 47,00 3.5 4.0 5.0 6.0 7.0 8.0 9.0.0 22.0 24.0 26.0 28.0.0.0.0 8.4.9 79.9 78.9 78.0 76.0.0 73.0 7.0 69.0 66.9 64.8 62.6.4 58.2.9 53.5 47.2.2 3.9 3,000 * 4,000 *,000 * 7 * 63,000 *,000 * 42,00 * 35,000 * 22,0 *,0 99,0 89,0,0 73,0 68,00 63,000 58,0 54,0 46,0,0 36,00 5.0 6.0 7.0 8.0 9.0.0 22.0 24.0 26.0 28.0.0.0.0 8.4.5 78.9 78.0 77.2.5 73.8 72..3 68.6 66.8.0 63.2 6.3 59.4 54.5 49.2 43.5 37. 3,000 * 7 * 63,000 *,000 * 42,00 * 35,000 * 22,0 *,0 99,0 8,0 73,0 67,0 62,0 58,0 54,0 46,0,0 35,0 32,00 6.5 7.0 8.0 9.0.0 22.0 24.0 26.0 28.0.0.0.0.0.0 ' ' 8.4 8.0.3 78.8 77.4.9 74.4 72.9 7.4 69.9 68.3 66.8.2 63.6 59.5.2.7.8.5 34.6 3 * 63,000 *,000 * 42,00 * 35,000 * 22,0 *,0 98,0 88,0,0 73,0 67,0 62,300 57,0 54,0 46,0,00 35,0 3,0 28,0 26,000 8.0 9.0.0 22.0 24.0 26.0 28.0.0.0.0.0.0.0.0 8.4.7. 78.8 77.5 76.2 74.8 73.5 72.2.8 69.5 68. 66.7 63.2 59.5.8 5.8 47.6 43.0 38. 32.5 3,000 *,000 * 35,000 * 22,0 *,0 98,0 88,0,0 73,0 67,0 62,300 57,0 54,000 46,000,00 35,0 3,0 28,0 25,0 23,0 2,0 9.5.0 22.0 24.0 26.0 28.0.0.0.0.0.0.0.0.0.0 0 9 8 7 6 00' 0' ' 30' ' 8.4 8. 79.9 78.8 77.6 76.4.2 74.0 72.8 7.6.4 69.2 66. 62.9 59.6 56.2 52.6 48.9.7 30.8 3 37,0 * 35,000 * 22,0 *,300 98,0 88,0,0 73,00 67,0 62,00 57,0 53,0,0 39,0 35,000 3,300 27,0 25,300 23,00 2,00 9,0.9 22.0 24.0 26.0 28.0.0.0.0.0.0.0.0.0.0.0 8.4.8 79.8 77.7 76.6.5 74.4 73.3 72.3 7.2 68.4.5 62.6 59.6 56.5 53.3.0 46.5 42.7 38.7 34.3 3 28,0 * 22,000 *,300 98,0 88,0,000 72,0 6 6,0 57,0 53,0,0 39,0 34,0 3,000 27,0 25,00 22,0,0 9,00 7,0 6,0 22.4 24.0 26.0 28.0.0.0.0.0.0.0.0.0.0.0 00.0 05.0 8.4.6 77.7 76.7.8 74.8 73.8 72.8.3 67.7. 62.4 59.7 56.8 53.9.9 47.7 44.4.8 37.0 32.8 3 2,000 *,00 98,0 88,0,000 72,0 6 6,0 57,0 53,0,0 39,0 34,0 30,0 27,0 25,00 22,0,0 9,00 7,0 5,0 4,00 23.9 24.0 26.0 28.0.0.0.0.0.0.0.0.0.0.0 00.0 05.0 0.0 5.0 8.4 8.4.5 77.8 76.9 76.0. 74. 7.8 69.5 67. 62.2 59.7 57. 54.4 5.6 48.8.7 42.5 39. 35.5 3.4 3 00,000 * 00,000 * 9 88,00 79,0 72,0 66,0 6,0 57,300 53,300,0 39,0 34,0 30,0 27,0 24,0 22,0,0 8,0 7,0 6,000 4,0 3,0 3,000 2,00 25.4 26.0 28.0.0.0.0.0.0.0.0.0.0.0 00.0 05.0 0.0 5.0.0 25.0 8.4 8.2.3 79.5 77.8 76..3 73.2 7.0 68.8 66.6 64.4 62. 59.7 57.3 54.8 52.3 49.6 46.9 44.0.9 37.7 34. 30.3 3 6 6 5 4 4 00,000 * 98,00 87,0 79,0 72,0 66,0 6,0 5 53,00,00 3 34,300 30,0 27,00 24,0 22,0,0 8,0 6,0 5,0 4,0 3,0 2,0,0,000 0,300 Note: Designed and rated to comply with ANSI Code B30.5. Capacities based on factors other than machine stability such as structural competence are shown by asterisk * in the charts. Refer to notes P0.
Crane Lifting Capacity Unit: lbs Counterweight: 7 lbs, Carbody weight: 4,300 lbs ' ' ' ' ' 26.9 28.0.0.0.0.0.0.0.0.0.0.0 00.0 05.0 0.0 5.0.0 25.0 34.4.0.0.0.0.0.0.0.0.0.0 00.0 05.0 0.0 5.0.0 25.0 35.0.0.0.0.0.0.0 8.4 8.0.2 77. 76.3 74.3 72.3.3 68.3 66.2 64. 6.9 59.7 57.5.2 52.8.4 47.8.2 42.4 39.5 36.3 32.9 3 92,0 87,0 79,300 72,300 6 6,000 56,0 52,0 44,0 38,0 33,0 29,0 26,0 24,0 2,0 9,0 6,0 5,0 4,00 3,0 2,00,0 0,0 9,0 9,0 3 28.4.0.0.0.0.0.0.0.0.0.0 00.0 05.0 0.0 5.0.0 25.0 35.0.0 8.4.8. 78.6 77.2.3 73.5 7.6 69.7 67.8.8 63.8 6.8 59.7 57.6.5 53.3 5.0 48.6 46.2 43.7 4.0 38. 35. 3.8 3,000 *,000 * 72,300 6 6,0 56,0 52,0 44,0 38,0 33,0 30,0 26,0 24,0 2,0 9,0 8,0 6,0 5,0 4,00 3,0 2,00,0 0,0 9,0 9,0 8,0 7,0 3 29.9.0.0.0.0.0.0.0.0.0.0 00.0 05.0 0.0 5.0.0 25.0 35.0.0.0 8.4 8.4.7.0 79.3 78.6 76.2 74.5 72.7.9 69. 67.3.5 63.6 6.7 59.8 57.8.8 53.7 5.6 49.4 47. 44.7 42.3 39.7 37.0 30.9 3,000 *,000 * 72,000 66,00,0 56,0 52,0 44,0 38,0 33,0 29,0 26,0 23,0 2,0 9,0 7,0 4,0 3,0 2,0,0,000 0,00 9,0 8,0 8,00 7,0 6,0 3 3.4.0.0.0.0.0.0.0.0.0.0 00.0 05.0 0.0 5.0.0 25.0 35.0.0.0.0 8.4 8.2.6 79.9 79.3 78.6.4 73.7 72.0.3 68.6 66.9.2 63.4 6.6 59.8 57.9 56.0 54. 52..0 47.9.7 43.4 4.0 38.5 35.9 33.0 3 73,0 7,0,0,0 56,0 52,0 44,300 38,00 33,0 29,0 26,0 23,0 2,00 9,00 7,0 6,000 4,0 3,0 2,300,0 0,0 9,0 7,0 7,0 6,0 6,00 5,0 5,0 3 8.4,000 * 35.9 8.4,000 * 37.4 8.4 48,0 * 38.9 8.4.9,000 * 8.4,000 * 8.2 47,0 *.0 8..4,000 *.8,000 *.0.7 46,0 * 79.9 79.8,000 *.0.3,000 * 43,0.0 78.6 78.3 44,000 78.9 43,0.0 78. 37,0.0 77.3 76.8 37,0.0 77.5 37,0.0 76.7 32,0 76.0.4 33,000.0 76. 32,0.4 28,0.0 74.7 73.9 29,300 74.7 28,0.0 74.0 25,300.0 73.4 72.4 26,000.0 73.2 25,0.0 72.7 22,0.0 72..9 23,300.0 7.8 22,0.0 7.3,0.0.8 69.3,0.0.4,0.0 69.9 8,0.0 69.5 67.8 8,0.0 68.9 8,0.0 68.5 6,0.0 68.2 66.2 7,00.0 67.4 6,0.0 67. 5,0.0 66.8 5,0.0 66.0 5,0.0.7 3,0 00.0.4 63. 4,300.0 64.4 4,00 00.0 64.2 2,0 05.0 64. 6.4 3,0 00.0 62.9 2,0 05.0 62.8,0 0.0 62.7 59.8 2,00 05.0 6.4,0 0.0 6.3 0,0 5.0 6.3 58.,0 0.0 59.8 0,0 5.0 59.8 9,0.0 59.8 56.4 0,300 5.0 58.2 9,0.0 58.3 8,0 25.0 58.4 54.7 9,0.0 56.6 25.0 56.7 7,0 56.9 52.9 8,0 25.0 54.9.2 7,0 35.0.4 5. 7,0 53.2 7,0 35.0 53.6 6,0.0 53.9 49.2 7,0 35.0 5.5 6,0.0 5.9 5,0 52.3 47.3 6,0.0 49.7.2 5,0.0.7.3 6,00 47.9 5,0.0 48.5 4,0.0 49. 43.2 5,0.0 46. 5,0.0 46.8 4,0 47.4 4. 5,000.0 44. 4,0 44.9 3,0 38.8 4,0 42. 4,00.0 43.0 3,0 36.5 4,00.0.0 3,0 3,0.0 37.8 3,0 3.3 3,0 2 2 2 2 43,0 * 42,0 *,00 * 3 32,00 28,0 25,00 22,0,000 4,0 3,0 2,300,0 0,00 9,0 7,0 6,0 6,00 5,0 4,0 4,0 3,0 3,0 32.9.0.0.0.0.0.0.0.0.0.0 00.0 05.0 0.0 5.0.0 25.0 35.0.0.0.0.0 8.4 8..5 79.8 79.2 77.7 76. 74.6 73.0 7.4 69.8 68.2 66.6 64.9 63.2 6.5 59.8 58.0 56.2 54.4 52.5.6 48.6 46.5 44.4 42.2 39.9 37.4 34.9 32. 3 4 3 3 3 3 0' ' 2' 230' Note: Designed and rated to comply with ANSI Code B30.5. Capacities based on factors other than machine stability such as structural competence are shown by asterisk * in the charts. Refer to notes P0. 6 *,0,0,0 52,000 44,000 37,0 33,000 29,00 26,000 23,00,0 8,0 7,00 5,0 4,300 3,0 2,00,000 0,00 9,0 8,0 7,0 7,0 6,0 6,00 5,0 5,0 4,0 4,0 2
LIFING CAPACIY 30 32 34 36 38 00 05 0 5 25 30 35 32 34 36 38 00 05 0 5 25 30 35 3 ' 79.9 78.9 76.9.9 74.9 72.4 69.9 67.3 6.9 59. 56.3 53.3. 46.8 43.3 39.6 35.4 30.8 Fixed Jib Lifting Capacity 30 ft Jib Offset 23,0 2,0,0 8,0 7,300 6,00 5,00 4,00 00' 79.8 78.9 76. 73.8 7.5 69.2 66.8 64.3 6.8 59.2 56.6 53.8 5.0 48.0 44.8 4.5 37.9 33.9 23,0 2,0 9,0 8,0 5,0 4,0 3,0 2,0 76.8 74.2 7.5 68.8 66.0 63.. 57.0 53.7.5 73..6 68..5 62.8. 57.3 54.3 5.2,0* 9,0* 8,0* 30 ft Jib Offset,300* 9,0* 8,0 7,300 ft Jib Offset 77.8 76.9 74.6 72.3 69.9 67.5.0 62.5 57.3 54.6 5.7 48.7.6 42.2 38.6 34.6 79.5 77.8.7 73.6 7.4 69.2 67.0 62.4 57.5.0 52.3 49.6 46.8 43.7.5 37. 33.2 23,300* 2,0*,0 9,0 8,0 7,0 6,0 5,300 4,300 3,0 23,00 2,0,0 8,0 7,0 6,000 5,000 4,000 3,00 2,300,0 77.7.2 72.8.2 67.6.0 62.2 59.3 56.3 53.2 78.6 76.4 74. 7.8 69.5 67.0 64.6 62.0 59.4 56.6 53.8 5,00* 4,0* 3,0* 3,0* 3,00* 2,0* ft Jib Offset 4,0* 4,300* 3,0* 3,0* 3,00* 2,0* ft Jib Offset 78.5 76.4 74.3 72. 69.9 67.7.4 63.0.7 58.2.7 53.0.3 47.4 44.4 4.2 37.7 33.9 79.3 77.4.4 73.4 7.3 69.3 67.2.0 62.8.6 58.3 56.0 53.5 5.0 48.4.6 42.7 39.6 36.3 32.6 7,0* 6,0 5,0 5,00 4,300 3,0 3,000 2,0,0,0,00 8,0* 7,0 6,0 5,0 5,00 4,0 3,0 3,0 2,0 2,00,0,00 0,0 78.5 76.2 73.9 7.5 69. 66.6 64.0 6.4 58.6.7 52.7 79.3 77.2. 72.9.7 68.4 66. 63.7 6.3 58.7 56. 53.3,0* 0,0* 0,0* 0,00* 9,0* 9,0* ft Jib Offset,00* 0,0* 0,0* 0,00* 9,0* 9,0* ft Jib Offset 78.0 76.0 74.0 72.0 69.9 67.8.7 63.5 6.3 59.0 56.6 54.2 5.7 49.0 46.3 43.4.3 36.9 33.3 78.8 76.9. 73.2 7.2 69.3 67.3.3 63.3 6.2 59.0 56.8 54.6 52.2 49.8 47.3 44.6 4.8 38.8 35.6 7,0* 6,0* 5,0* 4,0 3,0 3,000 2,300,0,00 0,0 0,00 9,0 9,0 8,0 Unit: lbs Counterweight: 7 lbs, Carbody weight: 4,300 lbs 7,0* * 5,300 4,0 3,0 2,0 2,300,0,0 0,0 0,300 9,0 9,0 9,0 8,0 8,0 79.2 74.8 72.6.4 68.0.6 63.2.6 58.0.2 52.2.9 73.9 7.8 69.6 67.5.2 62.9.6 58..5 52.9 9,00* 8,0* 8,0* 7,0* 7,0* 7,0* ft Jib Offset 8,0* 8,0* 8,0* 7,0* 7,0* 7,0* ft Jib Offset 77.6.7 73.8 7.9 69.9 67.9.9 63.9 6.8 59.7 57.5.2 52.9.4 47.9.2 42.4 39.4 36.2 32.6.0 78.3 76.6 74.8 73.0 7.2 69.3 67.5.6 63.7 6.7 59.7 57.6.5 53.3 5. 48.7 46.3 43.7 4.0 38. 35.0 3.5 5,0* 5,00* 4,0* 4,0* 4,300* 3,0* 3,000 2,0,0 0,0 0,300 9,0 9,0 8,0 8,0 8,0 7,0 7,0 7,300 7,00 5,0* 5,0* 5,0* 4,0* 4,0* 4,0* 4,0* 3,0 2,0 2,00,0 0,0 0,300 9,0 9,0 8,0 7,0 7,0 7,0 79.8 77.8.7 73.6 7.5 69.3 67. 64.8 62.4 59.9 57.3 54.6 5.8 78.6 76.7 74.7 72.8.8 68.7 66.6 64.4 62.2 59.9 57.5.0 52.4 7,0* 7,0* 7,0* * 6,0* 6,0* * 6,0* 6,000* ft Jib Offset * 7,0* 7,0* 7,0* 6,0* 6,0* 6,0* * 6,0* 6,000* 30 32 34 36 38 00 05 0 5 25 30 35 32 34 36 38 00 05 0 5 25 30 35 Note: Designed and rated to comply with ANSI Code B30.5. Capacities based on factors other than machine stability such as structural competence are shown by asterisk * in the charts. Refer to notes P0.
34 36 38 00 05 0 5 25 30 35 36 38 00 05 0 5 25 30 35 0' 78.8 78.0 77..0 72.9.7 68.5 66.3 64.0 6.7 59.3 56.8 54.3 5.7 48.9 46. 43. 39.9 36.4 32.6 Fixed Jib Lifting Capacity 30 ft Jib Offset 23,300 2,300 9,0 8,00 6,0 5,0 4,0 3,0 2,0,0,000 ' 78.8 78.0 76. 74. 72..0 68.0.9 63.7 6.6 59.3 57.0 54.7 52.3 49.7 47. 44.4 4.5 38.4 35. 3.4 23,00 2,00 9,0 7,0 6,0 5,300 4,0 3,300 2,300,0 0,0 0,0 9,0 78.8 76.6 74.4 72. 69.8 67.5. 62.6. 57.5 54.8 5.9 77.5.5 73.4 7.3 69.2 67.0 62.4. 57.7.2 52.6,0*,0* 9,0 8,0 5,0 30 ft Jib Offset,0* 9,0 6,0 5,0 4,0 ft Jib Offset 79.5 76.7 74.7 72.7.7 68.6 66.5 64.4 62.2 57.7.3 52.9.4 47.8 42. 39.0 35.7 77.6.7 73.8 7.9.0 68. 66. 64. 62. 57.8.6 53.4 5.0 48.6 46. 43.4.6 37.7 34.4 23,0 2,0 9,0 6,0 5,0 4,0 3,0 2,0,0,0 0,0 0,000 23,0 2,0 9,0 8,0 6,0 5,0 4,0 3,0 2,0,0,000 0,0 9,0 9,0 77.4.3 73.2 7.0 68.8 66.5 64.2 6.9 59.4 56.9 54.3 78.2 76.3 74.3 72.3.3 68.2 66. 64.0 6.7 59.5 57. 54.7 52.2 5,0* 4,0* 4,300* 3,0* 3,0* 3,00* 2,0 ft Jib Offset 5,00* 4,0* 4,0* 3,0* 3,0* 3,00 2,0 2,0 ft Jib Offset 78.2 76.3 74.4 72.6.6 68.7 66.7 62.7.6 58.4 56.2 54.0 5.6 49.2 46.7 44.0 4.2 38.2 35.0 3.5 78.9 77..4 73.6 7.8.0 68.2 66.3 64.4 62.5.5 58.5 56.5 54.4 52.2 49.9 47.6. 42.6 39.9 37.0 33.8 9,0 8,0 7,0 6,0 5,0 5,00 4,0 3,0 2,0 2,00,0 0,0 0,00 9,0 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0,0,0 0,0 9,0 9,300 8,0 78. 76. 74. 72..0 67.9.7 63.5 6.2 58.8 56.4 53.8 78.8. 73.2 7.3 69.4 67.4.3 63.2 6. 58.9 56.6 54.3 5.8,300*,000* 0,0* 0,300* 0,000* 9,0* 9,0* ft Jib Offset,0* 0,0* 0,0* 0,300* 0,000* 9,0* 9,0* 9,0* ft Jib Offset 79.5 77.7 76.0 74.2 72.4.6 68.8 66.9.0 63. 6. 59. 57.0 54.9 52.7.5 48..7 43..4 37.5 34.4 3.0 78.4 76.8. 73.4 7.7.0 68.3 66.5 62.9 6.0 59.2 57.2.2 53.2 5. 48.9 46.6 44.3 4.8 39.2 36.3 33.3 * 6,000 5,00 4,300 3,0 2,0 2,300,0,300 0,0 0,0 0,000 9,0 9,300 9,00 8,0 8,00 7,0 6,0 5,0 5,000 4,0 3,0 2,0 2,0,0,300 0,0 0,0 0,000 9,0 8,0 8,0 7,0 7,0 76.8 74.9 73.0 7.0 69.0 67.0 64.9 62.7.5 58.2.9 53.4 77.6.9 74. 72.2.4 68.5 66.6 64.6 62.6.5 58.4 56. 53.8 5.4 8,0* 8,0* * 7,0* 7,0* 7,0* ft Jib Offset Note: Designed and rated to comply with ANSI Code B30.5. Capacities based on factors other than machine stability such as structural competence are shown by asterisk * in the charts. Refer to notes P0. Unit: lbs Counterweight: 7 lbs, Carbody weight: 4,300 lbs 9,00* 8,0* 8,0* * 7,0* 7,0* 7,0* 7,0* ft Jib Offset 79.0 77.3.7 74.0 72.3.6 68.8 67..3 63.4 6.6 59.7 57.8.8 53.7 5.6 49.4 47.2 44.8 42.3 39.7 36.9 33.8 30.5 78.0 76.4 74.9 73.3 7.7.0 68.4 66.7.0 63.3 6.5 59.7 57.9 56.0 54. 52.. 47.9.7 43.5 4.0 38.5 35.8 32.8 5,0* 5,300* 5,000* 4,0* 4,0* 4,300* 4,00 3,0 2,0 2,000,0 0,0 0,0 9,0 9,0 9,00 8,0 8,0 8,00 7,0 7,0 7,300 7,00 6,0 5,0* 5,00* 4,0* 4,0* 4,0 4,0 4,000 3,300 2,0,0,0 0,0 0,0 9,0 9,0 9,0 8,0 8,0 8,0 7,0 7,0 7,0 7,0 6,0 79.3 77.5.7 73.9 72.0. 68.2 66.2 64.2 62. 59.9 57.7.4 53.0 79.9 78.2 76.5 74.8 73. 7.3 69.5 67.7.8 63.9 6.9 59.9 57.8.7 53.5 5. 7,0* 7,0* 7,0* 7,00* 6,0* 6,0* 6,0* * 6,0* 6,000* ft Jib Offset 7,0* 7,0* 7,300* * 6,0* 6,0* 6,0* * 6,0* 6,000* 5,0* 34 36 38 00 05 0 5 25 30 35 36 38 00 05 0 5 25 30 35 4
30' 30 ft Jib Offset 38 00 05 0 5 25 30 35 38 00 05 0 5 25 30 35 79.5 78.8 76.9. 73.2 7.3 69.4 67.5.5 63.5 6.5 59.4 57.2.0 52.8.4 48.0.5 42.8. 37. 33.9 22,0,0 9,00 7,0 6,0 5,000 3,0 2,0 2,000,0 0,0 9,0 9,0 8,0 Fixed Jib Lifting Capacity 78.4 76.5 74.5 72.6.6 68.6 66.5 64.4 62.3. 57.8.5 53. 9,0 6,0 5,300 4,0 3,0 ft Jib Offset 78.3 76.6 74.8 73.0 7.3 69.4 67.6.8 63.9 6.9 58.0.9 53.8 5.6 49.4 47.0 44.6 42.0 39.3 36.4 33.3 23,00 2,00 9,0 7,0 6,0 5,0 4,00 3,0 2,0,0 0,0 0,000 9,0 8,0 7,0 79.0 77..3 73.5 7.6 69.7 67.7.7 63.7 6.6 59.5 57.3. 52.7 5,000* 4,0* 4,00* 3,0* 3,0 3,00 2,0,0 ft Jib Offset 79.5 76.2 74.6 72.9 7.2 69.5 67.7 66.0 64.2 62.4.5 58.6 56.7 54.7 52.6.5 48.4 46. 43.7 4.2 38.6 35.8 32.8 9,300 8,00 6,0 5,0 4,300 3,0 2,0,0 0,0 0,0 9,0 8,0 7,0 79.5 77.8 76.0 74.3 72.5.7 68.8 66.9.0 63.0 6.0 59.0 56.8 54.6 52.3,00* 0,0* 0,0* 0,300* 0,000* 9,0* 9,0 9,0 ft Jib Offset 79.0 77.5.9 74.3 72.7 7. 69.5 67.9 66.2 64.5 62.7 6.0 59.2 57.4.5 53.6 5.6 49.5 47.4.2 42.9.5 35.3 32.3 7,0 6,0 5,0 4,0 4,00 3,0 2,0 2,0,0,000 0,300 9,0 9,00 8,0 8,00 7,0 7,0 6,0 6,0 78.3 76.7.0 73.3 7.6 69.8 68.0 66.2 64.3 62.4.5 58.5 56.4 54.2 52.0 * 8,0* 8,0* 8,0* * 7,0* 7,0* 7,0* 7,0* ft Jib Offset 78.6 77..6 74. 72.6 7. 69.5 68.0 66.4 63. 6.4 59.7 58.0 56.2 54.4 52.5.6 48.6 46.6 44.4 42.2 39.9 37.4 34.7 3.9 5,0* 5,0* 5,000* 4,0* 4,0 4,300 4,00 3,0 3,00 2,0,0,300 0,0 0,0 0,000 9,0 9,0 8,0 8,0 8,0 7,0 7,0 6,0 6,0 6,00 5,0 78.9 77.3.7 74.0 72.4.7 69.0 67.3.5 63.7 6.8 59.9 58.0 56.0 53.9 5.7 7,0* 7,0* 7,0* 7,0* * 6,0* 6,0* 6,0* * 6,0* 6,000 5,0 ' 30 ft Jib Offset 00 05 0 5 25 30 35 00 05 0 5 25 30 35 77.7 76.0 74.2 72.5.7 68.9 67.0.2 63.3 6.4 59.4 57.4.3 53.2 5.0 48.8 46.5 44.0 4.5 38.8 35.9 32.8 22,0,0 8,0 7,300 5,0 4,0 3,0 2,0,0 0,0 0,0 9,0 8,0 7,0 7,300 79. 77.3.5 73.7 7.8.0 68. 66. 64.2 62.. 58.0.8 53.6 5.2 9,0 7,0 5,00 4,000 3,000 2,000,0 ft Jib Offset 79.0 77.3.7 74.0 72.3.6 68.9 67.2.4 63.6 6.8 58. 56. 54.2 52..0 47.8.6 43.2.7 38. 35.3 32.3 22,0,0 9,00 7,0 6,00 4,0 3,0 2,0,0,00 0,0 9,0 9,00 8,0 7,0 6,0 76.2 74.5 72.7.9 69. 67.3.4 63.5 6.5 59.5 57.5.4 53.2 5,300* 4,0* 4,0* 4,00* 3,0 3,0 2,0,0 0,0 ft Jib Offset 78.5.4 73.8 72.2.6 69.0 67.3.7 64.0 62.2.5 58.7 56.9.0 53. 5. 49.0 46.9 44.7 42.4.0 37.5 34.8 3.8 9,0 7,0 6,0 5,0 4,00 3,00 2,00,300 0,0 9,0 9,300 8,0 8,0 7,0 7,0 6,0 6,000 78.5 76.8.2 73.5 7.8. 68.3 66.5 62.9 6.0 59.0 57.0.0 52.8,300*,000* 0,0* 0,0* 0,0* 0,000* 9,0 9,0 9,0 ft Jib Offset 78. 76.6.2 73.6 72..6 69.0 67.5.9 64.3 62.6.9 59.2 57.5.7 53.9 52.0. 48. 46. 44.0 4.7 39.4 36.9 34.3 3.4 7,00 5,0 4,0 4,00 3,0 2,300,0 0,0 0,000 9,0 8,0 7,0 7,300 6,0 6,0 6,00 5,0 5,0 79.0 77.4.8 74.2 72.6 7.0 69.3 67.6.9 64. 62.3.4 58.5 56.6 54.6 52.5 9,00* 8,0* 8,0* 8,0* 8,0* * 7,0* 7,0* 7,0* 7,0 ft Jib Offset 79.2 77.8 76.4 74.9 73.5 72.0.6 69. 67.6 66. 64.5 62.9 6.4 59.7 58. 56.4 54.7 52.9 5. 49.2 47.3.3 43.2 4. 38.8 36.4 33.8 3.0 5,0* 5,300* 5,00* 4,0* 4,0 4,0 4,0 4,00 3,0 2,0 2,300,0,300 0,0 0,0 0,000 9,0 8,0 8,0 7,0 7,0 6,0 6,0 6,00 5,0 5,0 5,00 4,0 76.4 74.9 73.3 7.8.2 68.5 66.9.2 63.5 6.7 59.9 58. 56.2 54.2 52.2 * 7,0* 7,0* 7,300* 7,00* 6,0* 6,0* 6,0* 6,0* * 6,0 6,00 5,0 5 Note: Designed and rated to comply with ANSI Code B30.5. Capacities based on factors other than machine stability such as structural competence are shown by asterisk * in the charts. Refer to notes P0. Counterweight: 7 lbs, Carbody weight: 4,300 lbs Unit: lbs LIFING CAPACIY
6 ' 30 ft Jib Offset 00 05 0 5 25 30 35 00 05 0 5 25 30 35 78.4 76.8. 73.5 7.8. 68.4 66.7 64.9 63. 6.3 59.4 57.5.6 53.6 5.6 49.5 47.3 42.7.2 37.6 34.8 3.8 22,0,0 8,0 6,0 5,0 4,300 3,0 2,300,300 0,0 9,0 9,00 8,0 7,0 7,0 6,0 6,0 6,000 Fixed Jib Lifting Capacity 78.0 76.3 74.6 72.9 7.2 69.4 67.6.8 63.9 62.0. 58. 56. 54.0 5.8,0 7,0 6,000 4,0 3,0 2,0,0 0,0 0,00 ft Jib Offset 78.0 76.5 74.9 73.3 7.7. 68.5 66.8.2 63.5 6.7 58.2 56.4 54.5 52.6.6 48.5 46.4 44.2 42.0 39.5 37.0 34.3 22,0,0 8,0 7,0 5,0 4,0 3,0 2,0,0 0,0 0,000 9,0 8,0 8,00 7,0 7,00 6,0 6,0 5,0 78.6.3 73.7 72.0.3 68.6 66.9. 63.3 6.4 59.6 57.6.6 53.6 5,00* 4,0* 4,300 4,000 3,000 2,00,0 0,0 9,0 ft Jib Offset 79. 77.6 76.2 74.7 73.2 7.6. 68.5 67.0.4 63.8 62..5 58.8 57.0.2 53.4 5.6 49.7 47.7.6 43.5 4.3 38.9 36.4 33.8,000,000 7,0 6,000 4,0 3,0 2,0,0,000 0,0 9,0 8,0 7,0 7,300 6,0 6,0 6,000 5,0 5,00 79. 77.5 76.0 74.4 72.8 7.2 69.5 67.9 66.2 64.5 62.7.9 59. 57.2.3 53.3,300*,000* 0,0* 0,0* 0,0* 0,000 9,0 9,0 8,0 ft Jib Offset 77.3.9 74.5 73.0 7.6. 68.6 67..6 64.0 62.5.9 59.3 57.6.9 54.2 52.5.7 48.8 46.9 44.9 42.8.6 38.3 35.9 33.3 7,0 6,0 6,000 5,000 3,0 2,0,0,00 0,0 9,0 9,00 8,0 7,0 7,0 6,0 6,0 6,00 5,0 5,300 4,0 4,0 79.5 78. 76.6. 73.5 72.0.4 68.8 67.2.6 63.9 62.2.4 58.6 56.8 54.9 52.9 * 8,0* 8,0* 8,0* 8,0* * 7,0* 7,0 7,0 7,0 ft Jib Offset 78.3.6 74.3 72.9 7.5. 68.7 67.2.8 64.3 62.8 6.3 59.8 58.2 56.6 54.9 53.3 5.6 49.8 48.0 46. 44.2 42..0 37.8 35.4 32.9 5,0* 5,0* 4,0* 4,0 4,0 4,300 4,0 4,000 3,0 2,0 2,300,0,0 0,0 9,0 9,0 8,0 7,0 6,0 6,0 5,0 5,0 5,000 4,0 4,0 3,0.0 78.5 77..7 74.2 72.7 7.2 69.7 68. 66.6.0 63.3 6.6 59.9 58.2 56.4 54.5 52.6.6 7,0* 7,0* 7,0* 7,300* 7,00* 6,0* 6,0* 6,0* 6,0 6,0 6,00 5,0 5,0 ' 30 ft Jib Offset 00 05 0 5 25 30 35 0 00 05 0 5 25 30 35 0 79.0 77.5.9 74.4 72.8 7.2 69.6 68.0 66.3 64.6 62.9 6.2 59.5 57.7.8 54.0 52.. 48.0.9 43.7 4.5 39. 36.5 33.8 30.9 22,00,00 6,0 5,0 4,0 3,00 2,00,0 0,0 9,0 8,0 7,0 7,300 6,0 5,0 5,0 4,0 77..5 73.9 72.2.6 68.9 67.2.5 63.7 6.9. 58.2 56.3 54.3 52.3,0 7,0 5,0 4,0 3,0 2,0,0 0,0 0,000 9,300 ft Jib Offset 78.6 77..7 74.2 72.7 7. 69.6 68. 66.5 64.9 63.3 6.6 58.3 56.5 54.8 53.0 5. 49.2 47.2.2 43.0.8 38.5 33.3 22,0,0 8,0 7,00 5,0 4,0 3,0 2,0,0 0,0 9,0 9,0 8,0 7,0 6,0 6,00 5,0 5,00 4,0 79.2 77.7 76. 74.6 73.0 7.4 69.8 68.2 66.5 64.8 63. 6.4 59.6 57.8.9 54.0 52.0 5,000* 4,0 4,000 2,0,0,00 0,300 9,0 ft Jib Offset 78.2 76.8.4 74.0 72.5 7. 69.6 68. 66.6. 63.6 62.0.4 58.8 57.2.5 53.8 52.0.2 48.3 46.4 44.4 42.3.2 37.9 35.5 32.9 8,0 7,0 5,0 4,0 3,0 2,0,0 0,0 0,00 9,0 8,0 8,0 7,0 7,00 6,0 6,0 5,0 5,300 4,0 4,0 4,00 78.2 76.7.2 73.7 72.2.6 69. 67.5.9 64.2 62.6.9 59. 57.3.5 53.6 5.7,0* 0,0* 0,0* 0,0* 0,0 9,0 9,300 8,0 7,0 ft Jib Offset 79.2 76.5.2 73.8 72.4 7. 69.6 68.2 66.8.3 63.9 62.4.9 59.3 57.7 56. 54.5 52.8 5. 49.4 47.5.7 43.7 4.7 39.6 37.4 35.0 32.5 7,0 6,00 4,0 3,0 2,0,0,000 0,0 9,0 8,0 7,0 7,300 6,0 5,0 5,0 5,00 4,0 4,300 3,0 3,0 78.6 77.2.8 74.3 72.9 7.4 69.9 68.4 66.8.3 63.7 62..4 58.7 57.0.2 53.3 5.4 * 8,0* 8,0* * 8,0* * 7,0 7,0 7,0 7,0 6,0 ft Jib Offset 78.9 77.6 76.3.0 73.7 72.3 7.0 69.7 68.3 66.9.5 64. 62.7 6.2 59.8 58.3 56.7.2 53.6 52.0.3 48.6 46.8 43. 4. 39.0 36.9 34.6 5,0* 5,000* 4,0 4,0 4,0 4,300 4,00 3,0 3,300 2,0,0,00 0,0 9,0 8,0 7,0 7,0 6,0 6,0 6,000 5,0 5,0 4,0 4,0 4,000 3,0 3,300 79. 77.7 76.3.0 73.5 72..7 69.2 67.7 66.2 63.2 6.6 59.9 58.3 56.6 54.8 53.0 5.2 * 7,0* 7,0* 7,0* 7,0* * 6,0* 6,0* 6,0 6,0 6,0 6,00 5,0 5,0 Note: Designed and rated to comply with ANSI Code B30.5. Capacities based on factors other than machine stability such as structural competence are shown by asterisk * in the charts. Refer to notes P0. Counterweight: 7 lbs, Carbody weight: 4,300 lbs Unit: lbs
' 30 ft Jib Offset 00 05 0 5 25 30 35 00 05 0 5 25 30 35 78. 76.7.2 73.7 72.2.7 69. 67.6 66.0 64.4 62.8 6.2 59.5 57.8 56. 54.3 52.5.6 48.7 46.7 44.7 42.6.3 35.5 32.9 2,0 9,0 6,0 5,000 3,0 2,0,0 0,0 0,000 9,300 8,0 7,0 6,0 6,0 5,0 5,300 4,0 4,0 4,000 Fixed Jib Lifting Capacity 79.3 77.8 76.3 74.7 73.2 7.6.0 68.4 66.8.2 63.5 6.8. 58.3 56.5 54.6 52.7,0 8,0 7,00 5,0 4,300 3,0 2,0,0 0,0 9,0 8,0 ft Jib Offset 79.2 77.8 76.4 74.9 73.5 72..6 69.2 67.7 66.2 63. 6.6 58.4 56.7.0 53.3 5.6 49.7 47.9 46.0 44.0 4.9 39.7 37.5 35. 32.5 22,00,00 6,0 5,300 4,00 3,000 2,00,00 0,300 9,0 8,0 7,0 7,00 6,0 6,00 5,0 5,00 4,0 4,0 3,0 3,0 78.3 76.8.4 73.9 72.4.9 69.3 67.8 66.2 64.6 63.0 6.3 59.6 57.9 56. 54.3 52.4 5,0* 4,0 3,0 2,0,0 0,0 0,000 9,300 8,0 7,0 ft Jib Offset 78.8 77.4 76. 74.7 73.4 72.0.6 69.2 67.8 66.3 64.9 63.4 6.9.4 58.9 57.3.7 54. 52.4.7 48.9 47..2 43.3 4.3 39.2 36.9 34.6 8,0 5,0 4,0 3,300 2,300,300 0,0 9,0 9,00 8,0 7,0 7,300 6,0 5,0 5,300 4,0 4,0 4,000 3,0 3,300 77.3.9 74.5 73. 7.6. 68.6 67..6 64.0 62.4.8 59.2 57.5.7 54.0 52.,300*,00* 0,0* 0,0 0,0 9,0 7,0 7,0 6,0 ft Jib Offset 78.4 77..9 74.5 73.2 7.9.6 69.2 67.9 66.5. 63.7 62.3.8 59.3 57.8 56.3 54.8 53.2 5.5 49.9 48.2 46.4 44.6 42.7.7 38.6 7,0 5,0 4,0 3,0 2,0,0 0,0 9,0 9,0 8,0 7,0 6,0 6,0 5,0 5,0 5,000 4,0 4,0 3,0 3,0 79.2 77.8 76.5. 73.7 72.3.9 69.5 68.0 66.5.0 63.5 62.0.4 58.8 57..4 53.7 5.9 9,00* 8,0* 8,0* 8,0* * 7,0 7,0 6,0 6,0 6,000 ft Jib Offset 79.3 78. 76.9.6 74.4 73. 7.8.6 69.3 68.0 66.6.3 63.9 62.6 6.2 59.8 58.3 56.9.4 53.9 52.3.7 49. 47.4.7 43.9 42. 5,0* 5,300* 5,00* 4,0 4,0 4,0 4,300 4,0 4,000 3,0 2,0,0 0,0 0,000 9,300 8,0 8,00 7,0 6,0 6,00 5,0 5,00 4,0 4,300 3,0 3,0.9 78.3.6 74.3 73.0 7.6.2 68.8 67.4 66.0 64.5 63.0 6.5 59.9 58.4 56.7. 53.4 5.6 7,0* 7,0* 7,0* 7,300* 7,00* * 6,0* 6,0 6,0 6,0 6,00 6,00 5,0 5,300 ' 30 ft Jib Offset 00 05 0 5 25 30 35 00 05 0 5 25 30 35 77.3.9 74.5 73. 7.6.2 68.7 67.2.7 64.2 62.7 6. 59.5 57.9 56.3 54.6 52.9 5. 49.3 47.4.5 43.5 4.5 39.3 37.0 23,0 2,0 9,0 7,0 6,0 4,0 3,0 2,0,0 0,0 9,0 7,0 7,00 6,0 5,0 5,0 4,0 4,0 4,000 3,0 79.8 78.4.5 74.0 72.6 7. 69.6 68.0 66.5 64.9 63.3 6.7. 58.4 56.7 54.9 53. 5.2,0 8,0 6,0 5,0 4,00 3,000 2,000,000 0,0 9,0 8,0 7,0 6,0 ft Jib Offset 78.3.7 74.3 72.9 7.6.2 68.8 67.3.9 64.5 63.0 6.5 58.4 56.9.3 53.6 52.0.3 48.5 46.7 44.8 42.9.9 38.7 2,0 9,0 6,0 5,00 3,0 2,0,0 0,0 0,000 9,300 8,0 7,300 6,0 6,0 5,0 5,00 4,0 4,0 3,0 3,0 78.8 77.5 76. 74.7 73.2 7.8.4 68.9 67.4.9 64.4 62.8 6.2 59.6 58.0 56.3 54.6 52.8 4,0 3,0 2,0,0 0,0 9,0 9,00 8,0 7,0 7,0 6,0 ft Jib Offset 79.3 78.0 76.7.4 74. 72.8 7.5.2 68.8 67.4 66. 63.3 6.8.4 58.9 57.4.9 54.3 52.8 5. 49.5 47.7 46.0 44.2 42.3 6,0 5,300 4,00 3,000 2,000,000 0,0 9,0 8,0 8,0 7,0 6,0 5,0 5,0 4,0 4,0 4,000 3,0 79.3 76.6.2 73.9 72.5 7. 69.7 68.3 66.8.3 63.8 62.3.8 59.2 57.6 56.0 54.3 52.5,300*,000* 0,0 0,00 9,0 8,0 8,00 7,0 6,0 6,0 5,0 ft Jib Offset 78.9 77.7 76.5.2 74.0 72.7 7.4.2 68.9 67.5 66.2 64.9 63.5 62.2.8 59.4 57.9 56.5.0 53.5 5.9.3 48.7 47.0.3 43.5 5,0 4,300 3,0 2,0,0 0,0 9,0 8,0 7,0 7,00 6,0 6,00 5,0 5,00 4,0 4,0 3,0 3,0 78.4 77..8 74.5 73. 7.8.4 69.0 67.7 66.2 64.8 63.4 6.9.4 58.8 57.2.6 54.0 52.3 * 8,0* 8,0* 8,0* 8,00 7,0 7,0 6,0 6,0 5,0 5,0 ft Jib Offset 79.8 78.6 77.4 76.2.0 73.8 72.6 7.4. 68.9 67.6 66.4. 63.8 62.5 6. 59.8 58.4 57.0.6 54. 52.7 5. 49.6 48.0 46.4 5,0* 5,0* 5,000 4,0 4,0 4,0 4,300 4,00 3,300 2,300,300 0,0 9,0 9,00 8,0 7,0 7,0 6,0 5,0 5,0 4,0 4,300 3,0 3,0.0 78.8 77.5 76.3.0 73.7 72.4 7. 69.8 68.4 67..7 64.3 62.9 6.4 59.9 58.4 56.9.3 53.7 52.0 * 7,0* 7,0* 7,0* 7,0* 7,00* 6,0* 6,0 6,0 6,0 6,0 6,000 5,0 5,000 4,0 7 LIFING CAPACIY Note: Designed and rated to comply with ANSI Code B30.5. Capacities based on factors other than machine stability such as structural competence are shown by asterisk * in the charts. Refer to notes P0. Counterweight: 7 lbs, Carbody weight: 4,300 lbs Unit: lbs
8 ' 30 ft Jib Offset 00 05 0 5 25 30 35 00 05 0 5 25 30 35 79.2 76.6.2 73.9 72.5 7. 69.7 68.3 66.9.5 64.0 62.5 6. 59.5 58.0 56.4 54.8 53.2 5.5 49.8 48. 46.3 44.4 42.5 23,0 2,00 9,00 7,0 5,0 4,0 3,0 2,00,00 0,0 9,0 8,0 7,0 6,0 6,000 5,0 4,0 4,0 3,0 3,0 Fixed Jib Lifting Capacity 78.9 77.6 76.2 74.8 73.4 72.0.6 69. 67.7 66.2 63.2 6.6. 58.5 56.8.2 53.4 5.7 9,0 8,00 6,0 5,00 3,0 2,0,0 0,0 9,0 9,00 7,0 6,0 5,0 ft Jib Offset 78.9 77.6 76.3.0 73.7 72.4 7. 69.7 68.4 67.0.7 64.3 62.9 6.4 58.5 57.0.5 53.9 52.3.7 49.0 47.3.6 43.7 2,0 9,0 7,0 6,0 4,0 3,0 2,0,0 0,0 9,0 8,0 8,0 7,0 5,0 5,0 4,0 4,0 3,0 3,300 78.0 76.7.4 74.0 72.7 7.3 69.9 68.5 67..6 64.2 62.7 6.2 59.6 58. 56.5 54.8 53.2 4,300 3,0 2,00,00 0,0 9,0 8,0 8,00 7,0 6,0 6,0 5,0 ft Jib Offset 78.5 77.3 76.0 74.8 73.6 72.3 7.0 69.7 68.5 67..8 64.5 63. 6.8.4 59.0 57.5 56. 54.6 53. 5.5 49.9 48.3 46.6 9,0 6,0 5,000 3,0 2,0,0 0,0 9,0 9,00 8,0 7,0 7,0 6,0 6,000 5,0 4,0 4,0 3,0 3,0 78.5 77.2.9 74.6 73.3 72.0.6 69.3 67.9 66.5. 63.7 62.2.8 59.2 57.7 56. 54.5 52.9,0* 0,0 9,0 9,00 8,0 7,0 7,0 6,0 6,00 5,0 4,0 ft Jib Offset 78.2.8 74.6 73.4 72.2 7.0 69.8 68.5 67.3 66.0 63.4 62..7 59.4 58.0 56.6.2 53.8 52.3.8 49.2 47.6 6,0 5,0 3,0 2,0,0 0,0 0,000 9,300 8,0 7,300 6,0 6,0 5,0 5,00 4,0 4,00 3,0 3,300 78.9 77.6 76.4. 73.9 72.6 7.3.0 68.7 67.3 66.0 64.6 63.2 6.8.3 58.9 57.4.8 54.3 52.6 9,00* 8,0* 8,0* 8,0* 8,0 7,0 6,0 6,0 5,0 5,300 4,0 4,300 ft Jib Offset 79.0 76.8.6 74.5 73.3 72. 7.0 69.8 68.6 67.4 66. 64.9 63.6 62.4 6. 59.8 58.5 57..8 54.4 53.0 5.5.0 5,0* 5,000 4,0 4,0 4,0 4,300 4,00 3,000 2,000,000 0,0 9,0 8,0 8,00 7,0 6,0 5,0 5,0 4,0 4,0 3,0 3,0.4 79.2 78.0 76.8.6 74.4 73.2 7.9.7 69.4 68. 66.8.5 64. 62.8 6.4 58.5 57.0.5 54.0 52.4.8 7,0* 7,0* 7,0* 7,0* 7,0* 6,0 6,0 6,0 6,0 6,00 5,0 5,00 4,0 4,00 3,0 3,300 0' 30 ft Jib Offset 00 05 0 5 25 30 35 00 05 0 5 25 30 35 78.4 77.2.9 74.6 73.3 72.0.6 69.3 68.0 66.6.2 63.8 62.4 6.0 59.6 58. 56.6. 53.5 5.9.3 48.6 46.9.2 23,0 2,000 7,300 5,0 4,300 3,00 2,000,000 0,00 9,300 8,0 7,0 7,0 6,0 5,0 5,300 4,0 4,0 3,0 3,300 78. 76.8.5 74.2 72.8 7.5. 68.7 67.3.9 64.5 63.0 6.6. 58.5 57.0.4 53.8 52. 9,0 8,00 6,0 5,000 3,0 2,0,0 0,0 9,0 7,0 5,0 5,00 ft Jib Offset 79.3 78. 76.9.6 74.4 73. 7.9.6 69.3 68.0 66.7.4 64. 62.7 6.4 58.6 57..7 54.2 52.7 5. 49.5 47.9 23,0 2,0 9,0 7,0 6,00 4,0 3,0 2,300,300 0,0 9,0 8,0 8,00 7,0 6,0 6,0 5,0 5,000 4,0 4,000 3,0 79.8 78.6 77.3 76.0 74.7 73.4 72..8 69.5 68. 66.8.4 64.0 62.6 6. 59.7 58.2 56.6. 53.5 5.9 4,0 3,00 2,000,000 0,0 9,0 8,0 7,300 6,0 6,00 5,0 4,0 4,0 ft Jib Offset 79.0 77.8 76.6.4 74.2 73.0 7.8.6 69.4 68. 66.9.6 64.3 63.0 6.7.4 59.0 57.6 56.2 54.8 53.4 5.9.4 48.8 9,0 7,0 6,0 4,0 3,0 2,0,0 0,0 9,0 7,0 7,00 6,0 5,0 5,300 4,0 4,0 3,0 3,300 79.0 77.7 76.5.3 74.0 72.7 7.5.2 68.9 67.6 66.2 64.9 63.5 62..7 59.3 57.8 56.3 54.8 53.2 5.6,300* 0,0 9,0 7,0 7,00 6,0 5,0 5,300 4,0 4,300 3,0 ft Jib Offset 79.8 77.5 76.4.2 74. 72.9 7.8.6 69.4 68.2 67.0.8 64.5 63.3 62.0.7 59.4 58. 56.8.4 54.0 52.6 5. 6,0 5,00 3,0 2,0,0 0,0 9,0 9,0 8,0 7,0 7,0 6,0 6,000 5,0 4,0 4,0 3,0 3,0 79.3 78. 76.9.8 74.5 73.3 72..8 69.6 68.3 67.0.7 64.4 63. 6.7.3 58.9 57.5 56.0 54.5 53.0 9,00* 8,0* 8,0* 8,0 7,0 6,0 5,0 5,00 4,0 4,00 3,0 ft Jib Offset.5 79.5 78.4 77.3 76.2. 73.9 72.8 7.7.6 69.4 68.3 67..9 63.5 62.3 6. 59.8 58.5 57.2.9 54.6 53.2 5,0* 5,0* 5,300* 5,00 4,0 4,0 4,0 4,0 4,000 2,0,0 0,0 0,000 9,300 8,0 7,300 6,0 6,0 5,0 5,000 4,0 4,00 3,0 78.5 77.4 76.2.0 73.9 72.7 7.5.3 69.0 67.8 66.5.3 64.0 62.6 6.3 58.6 57.2.7 54.2 * 7,0* 7,0* 7,0* 7,300* 7,00 6,0 6,0 6,0 6,000 5,0 4,0 4,0 3,0 3,0 Note: Designed and rated to comply with ANSI Code B30.5. Capacities based on factors other than machine stability such as structural competence are shown by asterisk * in the charts. Refer to notes P0. Counterweight: 7 lbs, Carbody weight: 4,300 lbs Unit: lbs
RANSPORAION PLAN 9
PARS AND AACHMENS 2
22
Note: his catalog may contain photographs of machines with specifications, attachments and optional equipment not certified for operation in your country. Please consult KOBELCO for those items you may require. Due to our policy of continual product improvements all designs and specifications are subject to change without advance notice. Copyright by KOBELCO CRANES CO., LD. No part of this catalog may be reproduced in any manner without notice. 7-, Higashigotanda 2-chome, Shinagawa-ku,okyo 4-8626 JAPAN el: +8-3-5789-230 Fax: +8-3-5789-3372 URL: http://www.kobelco-cranes.com/ Inquiries o : 08 rain Court, Houston, exas 74, USA el: +-73-6-57 Fax: +-73-6-72 URL: http://www.kobelcocranesnorthamerica.com/ Bulletin No. CK0G_SPEC_US 03025IF Printed in Japan