195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated stem Double Viton O-ring stem seal Self lubricating Teflon seats Chrome plated brass ball 3 Year Warranty Description Size Pressure Rating 195C41 F. NPT x F. NPT 3/8 FNPT 125 195D41 F. NPT x F. NPT 1/2 FNPT 125 195E41 F. NPT x F. NPT 3/4 FNPT 125 195F41 F. NPT x F. NPT 1 FNPT 125 F.NPT x F.NPT 195C30 Flare x Flare 3/8 Flare 125 195D30 Flare x Flare 1/2 Flare 125 195D32 Flare x Flare 1/2 x 3/8 Flare 125 195S30 Flare x Flare 5/8 Flare 125 195D31 F. NPT x Flare 1/2 FNPT x 1/2 Flare 125 FLARE x FLARE M.NPT x FLARE F.NPT x FLARE 195D33 F. NPT x Flare 1/2 FNPT x 3/8 Flare 125 195C34 M. NPT x Flare 1/2 MNPT x 3/8 Flare 125 195D34 M. NPT x Flare 1/2 MNPT x 1/2 Flare 125 S80 Series Gas Cocks Female x Female hot forged brass gas meter cock valves with tamper proof locking covers, full port design, blow-out proof stem with double Viton O-ring stem seals. CSA, cul and UL approved for 600 psi, -40 to + 350. S80F41 S80F43 Size Description S80E41G 3/4 FNPT Non-insulated, S80F41G 1 FNPT painted grey S80E41 3/4 FNPT S80F41 1 FNPT S80G41 1 1/4 FNPT Non-insulated, unplated brass S80H41 1 1/2 FNPT S80I41 2 FNPT Size Description S80E43 S80F43 S80G43 3/4 FNPT 1 FNPT 1 1/4 FNPT Self lubricating Teflon seats Chrome plated brass ball Three year warranty Dielectric Union Gas cock S95 Series Ball Valves Size Pressure Rating S95B41 1/4 600 S95B41N 1/4 600 S95C41 3/8 600 S95C41N 3/8 600 S95D41 1/2 600 S95D41N 1/2 600 S95E41 3/4 600 S95F41 1 600 S95G41 1 1/4 600 S95H41 1 1/2 600 S95I41 2 600 CSA,, CGA 9.1 and FM Approved. UL and cul approved for Vapor and Liquid LPG service to 600 PSI. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass ball valve Blow-out nickel plated stem Double Viton O-ring stem seal N = Nickel Plated Brass Precision Needle Valves These instrumentation valves have knurled brass hand wheels, and are for use with air, LP gases (such as torch applications) and liquids. Each valve is pressure tested at the factory. The valve body is machined from brass bar stock. The stem is stainless steel with a fine thread for controlling flow. O-ring packing assures leak proof trouble free service. They are CSA Certified for LP gas to 350 PSI max. Temp. range is -40 to 130 F (-40 to 54 C). Certifications can expire, so they should be confirmed with the approving agencies. Pipe 852-B 1/4 F X 1/4 F 850-B 1/4 M x 1/4 F 851-B 1/4 M x 1/4 M 853-L 9/16-18 LH X 9/16-18 LH X Canada s Leader in Energy Products Equipment 125
BRONZE & STAINLESS STEEL BALL VALVES Apollo Bronze Ball Valves - Regular Port UL listed for LP Gas, Natural Gas and Heated Oils. 80-101-01 Thread Size 1/4" Valve 2 1/16" Port Diameter PSI Adjustable gland packing Reinforced TFE stem packing & seats Blow-out proof stem Large ports for reduced pressure drop Chrome plated ball 80-102-01 80-103-01 80-104-01 1/2" 3/4" 2 1/16" 2 1/4" 3" 1/2" 5/8" 80-105-01 1" 3 7/8" 80-106-01 1 1/4" 4" 1" 80-107-01 1 1/2" 4 1 1/4" 80-108-01 2" 4 5/8" 1 1/2" Two Piece Stainless Steel Ball Valves PSI Thread Size Valve Port Diameter 720-01-01 600 1/4 2.21 0.43 720-01-03 600 1/2 2.46 0.59 720-01-04 600 3/4 3.02 0.79 720-01-05 600 1 3.61 0.98 Emico Ball Valves are CRN Registered in every province, UL and cul approved for use in Liquid LPG and NH3 Applications, as well as a wide range of other chemical applications. Three Piece 4-Bolt Stainless Steel Ball Valves PSI Thread Size Designed for commercial and industrial use on a wide range of fluid handling applications. Ideal for fluid systems requiring a union. Maximum working pressure 600 PSIG up to 2 inch, PSI over 2 inch. Available with Threaded Ends (730 Series), Socket Weld Ends (731 Series) and Butt Weld Ends (732 Series). 316 cast stainless steel body and ball Blow-out proof stem Safe and easy locking handle Corrosion resistant low operating torque handle Reinforced PTFE seats Valve Port Diameter Body Handle Height PTFE Packing/Stem seals Three piece construction for convenient in-line repairs Full port 100% Factory Tested Manufactured under ISO 9000 Approved Quality System Handle 730-01-03 600 1/2 2.76(2.88) 0.59 2.88 2.12 4.06 17 730-01-04 600 3/4 3.03(3.38) 0.79 0.79 3.38 2.49 34 730-01-05 600 1 3.62(3.85) 0.98 3.85 3.08 5.71 57 730-01-06 600 1 1/4 4.13(4.47) 1.26 4.47 3.24 5.71 80 730-01-07 600 1 1/2 4.72(5.00) 1.5 5.00 3.66 7.09 143 730-01-08 600 2 5.43(5.80) 1.97 5.80 3.89 7.09 245 731-01-10 3 7.52(8.71) 3.15 8.71 5.59 11.81 700 731-01-11 4 8.5(9.49 3.94 9.49 6.52 15.75 1200 CV Accessories for 730 Series 730-HDL-010 730-HDL-05 730-HDL-06 730-HDL-07 730-HDL-08 Description Handle For 3.0 730 Series Handle For 1.0 730 Series Handle For 1.25 730 Series Handle For 1.50 730 Series Handle For 2.0 730 Series 126 NATIONAL TOLL FREE DIRECTORY 1-866-574-5100 I ON THE WEB www.nee.ca
flanged BALL VALVES Velan Flanged Ball Valves Velan flanged ball valves are avialable in full port or standard port configurations with 300 or 150 Lbs connection ends. These valves are UL certified and tagged, Firesafe API1601 4th edition and CRN registered in all provinces. RF Flanged split body design Glass reinforced PTFE seats Lever operated with actuator pad Cast Carbon Steel Body Memory seal seats that compensate for wear Stem Bearings to reduce side thrust Blow-out proof stem Compliance to API 607 and BS6755 Fire safe standards 300 Lb. valves are approved for pressures up to 400 psi Contact NEE for detailed specifications Description Cv Flow rate F0810402SSGAUL 2, Standard port, 300 Lbs Flanged 125 usgpm F1010402SSGAUL 3, Standard port, 300 Lbs Flanged 430 usgpm F1210402SSGAUL 4, Standard port, 300 Lbs Flanged 600 usgpm F1011402SSGAUL 3, Full port, 300 Lbs Flanged 1020 usgpm F1211402SSGAUL 4, Full port, 300 Lbs Flanged 2000 usgpm Note: Cv Flow rate is the amount of water that will flow at 60º F at a 1 psi pressure drop. Canada s Leader in Energy Products Equipment 127
ELECTRIC SOLENOID VAVES Electric Solenoid Valves - AC & DC - 7000 Series 7000 Series products have been designed to offer customers the ultimate in performance, versatility and quality. Every valve is engineered for optimal operation, is constructed with modern machinery that uses stringent processes, and provides standard features not offered in any competitive line. The 7000 Series is truly a world class product offering. Thread Size Description Voltage 73212BN52NP1NOH148P3 3/4 NPT Normally Closed, NEMA 7 Hazardous duty 120 VAC coil at 10 watts, with 48 leads 7321KBN2RN00N0H111P3 1/4 NPT Normally Closed, NEMA 7 Hazardous duty 120 VAC coil, at 10 watts, with 18 leads 7321GBN99N00H111P3 2 NPT Normally Closed, NEMA 7 Hazardous duty 120 VAC coil, at 10 watts, with 18 leads 71315SN2GNJ1N0H111P3 1/4 NPT Normally Closed, NEMA 7 Hazardous duty 120 VAC coil, at 10 watts, with 18 leads 7221GBN4VN00N0H111P3 1/2 NPT Normally Closed, NEMA 7 Hazardous duty 120 VAC coil, at 10 watts, with 18 leads 73218BN75N00N0H111P3 1-1/4 NPT Normally Closed, NEMA 7 Hazardous duty 120 VAC coil, at 10 watts, with 18 leads 73212BN52NPINOH111Q3 3/4 NPT - Hazardous duty 220 VAC coil at 10 watts, with 18 leads 128 NATIONAL TOLL FREE DIRECTORY 1-866-574-5100 I ON THE WEB www.nee.ca
SOLENOID VALVES Jefferson Solenoid Valves Typically used as an emergency isolation between the outlet of a storage tank and the inlet of a pump to allow remote shut-down of propane flow in compliance with local gas authorities in some regions. Size Body Material Piston Material Seals Operation Z1314BV06AT-120V/60.75" Bronze Bronze Viton Hung Piston Z1314BV08AT-120V/60 1.0" Bronze Bronze Viton Hung Piston Z1314BV12AT-120V/60 1.5" Bronze Bronze Viton Hung Piston Z1314BV16AT-120V/60 2.0" Bronze Bronze Viton Hung Piston Z1314BV24AT-120V/60 3.0" Bronze Bronze Viton Hung Piston Specifications: 2-way, normally closed, semi-direct acting piston solenoid valve Brass, stainless-steel or carbon stewdy construction 3/4 NPT through 3 NPT female end connections ANSI Flanged valves available Automatic pressure relief back to tank Maximum operating pressure differential to 105 PSI (7.25 bar) Vacuum applications available Flow coefficients (CV) to 94.00 Non-molded coil with 18 leads housed in a NEMA 7 hazardous location enclosure supplied as standard CSA certified for both general purpose and hazardous locations Canada s Leader in Energy Products Equipment 129