PEOPLE Our team at Airport Show Dubai 2017 Our team taking part in another successful exhibition Our people at the opening of the new factory Our product assemblers
FACILITIES Our headquarters and production facility
FACILITIES Our warehouse from inside and outside
CLIENTS WE HAVE OVER 300 CLIENTS ALL OVER THE WORLD MAIN FACILITIES Estonia Russia Cuba Indonesia Singapore UAE Austria Azerbaijan Belarus Bulgaria Canada Chile Croatia Cuba Cyprus Czech Republic Estonia Finland Germany Greece Indonesia Kazakhstan Latvia Lebanon Libya Lithuania Malaysia Morocco Nigeria Nicaragua Panama Poland Russia Senegal Singapore South Africa South Korea Spain Sweden Thailand UAE USA Ukraine Uzbekistan Vietnam
ElectroAir singles out the main priorities of work in the field of quality, ecology and safety: Norms, standards and directives that we follow: ISO6858, ISO1540, BS 2G 219, MIL-STD-704F, EN 61000-6-4, EN 61000-6-2, EN 50082-2, EN 61558-2-6, EN12312-20, EN2282, EN1915-1, SAEARP 5015, IEC 60529, DFS400, GOST 54073-2010, ISO 9001:2008, ISO 14001:2004, OHSAS 18001, 73/23/ EEC, 2004/108/EC, EN124 F900
WORKFLOW Adjusted as per client requirements At our factory or at the clients PoU Training and certification Minimizing cost of ownership Special execution Extraordinary features and performance Team of professionals Technical support 24/7/365 Certified engineers all over the world 24 hours for problem solving Best materials and components Reliable suppliers Following the standards Complete test of every unit Highest quality 15 years stock of spare parts Stock at client s facility Initial spare parts with units
PRODUCTS
Very stable frequency Possibility to regulate from 320Hz to 440Hz Absolute voltage quality according to ISO 6858 standard Max. phase is less than 2V Automatic voltage drop compensatio n on the cable (up to 200m) Any power rate according to client needs Up to 4 output channels Simultaneous work of output channels No CO2 emissions Maximum usage of recycle materials Extraordinary personnel safety features Easy to operate Noise level <60dB(A) @ 1m Modular system easy to replace Time to repair is less than 15 minutes Standard (-20 C to + 40 C) Tropical (-10 to + 60 C) Nordic (-50 to +40 C) Alpine up to 15000m a.s.l. Relative humidity up to 100 %
Current up to 1200 A with overloads up to 2500 A Very stable voltage Automatic voltage drop compensation on the cable (up to 50m) A NEW LIGHTWEIGHT COMPACT DESIGN OF THE UNIT IS NOW AVAILABLE! Dual independent output channel option Ability to work on a 28V/56V* mode No CO2- emissions Maximum usage of recycle materials Extraordinary personnel features Easy to operate Noise level <60dB(A) @1m Modular system easy to replace Time to repair takes less than 15 minutes Energy consumption monitoring system Power log an black box mode IN ORDER TO ATTAIN THE PARAMETERS REQUIRED BY THE NEW GENERATION OF AIRCRAFT, WE CAN ALSO PROPOSE A COMPLETE SOLUTION FOR REPLACING OLD VERSIONS OF TRUs FOR 400 Hz DIESEL ENGINE DRIVEN GPUs WITH OUR CONVERTER RECTIFIER UNITS EAR-800C
Combination of frequency converter and rectifier Independent AC and DC outputs Possibility of simultaneous work of both channels Power supply for several aircrafts Located on top Low noise fans Special 400Hz 36V output Ability to work on a 28V/56V mode
Opening counterweight system Certified to EN 124 F900 standard 400 Hz, 28,5VDC, PCA, compressed air, water, fuel, utility, sockets The hatch is equipped with remote control ON/OFF, regulations, emergency stop Construction supervision during installation Sump dump Anticondensation heater Microclimate system option WE STRONGLY RECOMMEND USING ELECTROAIR GPUs WITH ELECTROAIR HATCH PIT SYSTEMS. BY USING THEM AS A COMPLETE SOLUTION, IT IS POSSIBLE TO INSTALL GPUs FAR FROM THE LOCATION OF THE PIT SYSTEM.
MORE: INCOME STABLE FREQUENCY STABLE VOLTAGE LESS: POLLUTION NOISE TRAFFIC WAITING TIME
Optional 50/60Hz output to 250A Possibility to work with 50/60Hz 3ph 400V mains power Controls and monitors position and work of GPU Low CO2 emissions Low noise Solid state Mobile On truck Up to 10 hours of continuous work with overload up to 200% USING OUR DIESEL ENGINE GPUs WITH ELECTRICAL POWER OUTPUTs, YOU WILL MINIMIZE THE COST OF OWNERSHIP. WITH OUR TECHNOLOGY OF 1500 RPM DURING A LONGER PERIOD OF EXPLOITATION YOU WILL HAVE A HUGE REDUCE ON CONSUMPTION OF FUEL!
Air cooling system with low noise fans USB connection Test report Engine start simulation 6 steps (35sec) Continuous test Voltmeter, ammeter, frequency meter Touch screen 23 kg Compact (can be carried as luggage in aircraft) Comfortable carrying case AVAILABLE FOR AC AND DC! FOR AC 400Hz UP TO 180 KVA FOR DC UP TO 2500A
The extender is equipped with remote control Storing and moving of cables from GPU to aircraft Consists up to 4 cables for AC 400Hz or 28,5VDC Bolt connections of few sections The maximum angle between the adjacent is 270 degrees
Supply cable of voltages up to 1000V DC and AC current Two bearings drum rotation Free end cable storing Up to 100m cable section 4x 70mm2
Ability to print the results of chargingdischarging Connection to computer Monitoring function 47 programs installed Ability to create your own program Simultaneous charge and discharge of two batteries Can be used as DC power supply Memorizes last function Restore function EAR-CH CAN BE USED WITH ALL TYPES OF AIRCRAFT BATTERIES!
SOLAR INVERTER EAI EAI is intended to transform DC voltages generated by solar modules to 3-phase AC voltage 115V, 400Hz or 220V 50Hz.
TOOLBOX EAKIT EAKIT includes a necessary set of special tools and measuring devices for conducting commissioning works, periodic maintenance and repair of ground support equipment.
ONE-STOP SOLUTION LOOKING FORWARD TO COOPERATE WITH YOU!