ChemWell Replacement Parts & Accessories

Similar documents
Physiological Calibration Standard II Calibration standard physiological fluid CALIBRATION STANDARD PROTEIN

2900 Series Service Manual

EPOND SA CP 389 CH Vevey Switzerland.

Autoplex Specifications

PARTS MANUAL. American Dish Service ADS CONVEYOR DISHWASHER MODELS: ADC-66 L-R/R-L EFFECTIVE: MAY, 2011

M9/D (-020 thru -022) M11/D (-020 thru -022)

PARTS MANUAL. American Dish Service MODELS: ADC-44 L-R/R-L ADS CONVEYOR DISHWASHER EFFECTIVE: MAY, 2008

Washer-Extractor Refer to Page 3 for Model Numbers

KEY PART # DESCRIPTION KEY PART # DESCRIPTION

DSX and DS-2 Parts List (Engineering) INOVA pn OEM pn Description

SECTION 8. PARTS INFORMATION

KEY PART # DESCRIPTION KEY PART # DESCRIPTION

Washer-Extractor. Parts. Pocket Hardmount. Refer to Page 3 for Model Numbers. Models UW60P2 and UW60P3.

SECTION 3. PARTS INFORMATION INTRODUCTION This section list the replaceable parts of the Henny Penny OFE/OFG- 32X Open Fryers.


Washer-Extractor. Parts. Pocket Hardmount. Refer to Page 3 for Model Numbers. Models UW35P2 and UW35P3.

Washer-Extractor Pocket Hardmount

cos-8e & cos-8eds combi ovens cnv-8e convection oven

NEW INSTRUMENT. 08th November / MKT. We announce the launching of the new member of the Biokit Elisa Instrumentation family: DS2

KEY PART # DESCRIPTION KEY PART # DESCRIPTION

SECTION 7. PARTS INFORMATION

CL22 SPARE PARTS MANUAL. Spengler_CL22_SPM_EN. Part No.: _03

COS-8G & COS-8GDS COMBI OVENS BCS-G STEAMER CNV-8G CONVECTION OVEN REPLACEMENT PARTS LIST

CATALOG OF REPLACEMENT PARTS

Repair Parts List WASHER MODEL NUMBER MAF25MC4VW. When requesting service or ordering parts, always provide the following information:

SVG SERIES 8600 SPARE PARTS LIST



Illustrated Parts Guide DSD EDGE 120VAC. Page 1 of 32


TESTO 350 Upgrades / Accessories / Spare Parts. Replacement Sensors

Contents. New: "C" column in sparepart tables indicates consumable parts. Edition 9 February 2006 Service Manual DPX System Page 10.

SECTION 3. PARTS INFORMATION

hv-100e hydrovection oven

Cascade. Aqua-Aire. Standard & Swivel Lift Spas, Optional Reservoir. Parts Breakdown & Assemblies Right, Left, and End Tub Access Door Systems

COMPACT RACK TYPE DISHWASHER

Retriever 5800G/P/D. revised 2/01 Form Number

Parts List GoPump C-series & R-series, Spec 2000 or Higher

Retriever PARTS LIST Advance MODEL 5200G(OBSOLETE)

Effective june 11, 2015

REPLACEMENT PARTS MANUAL

Control Panel Interface Upgrade Installation Guide For Model 200i and 250i Motorcycle Dynamometers Serial Number 202xxxx.

refrigeration SHAKE #15-77CMT ICE CREAM MACHINE ELECTRO FREEZE 21 SHAKE DISPENSE HEAD ASSEMBLY SHAKE BEATER SEAL ASSEMBLY 9

CATALOG OF REPLACEMENT PARTS

215E. Operator and Parts Manual MM158

Washer-Extractor. Parts. Twin Tub. Refer to Page 3 for Model Numbers. UM100 UM202 UM1202 U061C_F232115

www MK-Electronic de Parts and Diagrams7

CATALOG OF REPLACEMENT PARTS C24EA SERIES STEAMER 3-PAN BASIC. ML /240 V. 8.5kW ML V. 8.5kW 3-PAN PRO

Washer-Extractor Pocket Hardmount

Overview Spare Parts Manual Update: 3/11/04

Repair Parts List WASHER MODEL NUMBER MFR35MCATS. When requesting service or ordering parts, always provide the following information:

Stapler Folder Model 82 Spare Parts List

MTI SPARE PARTS LIST FOR 86XX

HV-100E HYDROVECTION OVEN REPLACEMENT PARTS LIST

MODEL CMA-44 PARTS MANUAL Rev 2.13

Repair Parts List DISHWASHER MODEL NUMBER MDB5600AWW. When requesting service or ordering parts, always provide the following information:

SECTION 3. PARTS INFORMATION

CATALOG OF REPLACEMENT PARTS

Repair Parts List DISHWASHER MODEL NUMBER JDB6510AWP. When requesting service or ordering parts, always provide the following information:

PACIFIC Recumbent Height-Adjustable Bath System Parts Breakdown and Assembly Manual

Washer-Extractor Pocket Hardmount

Repair Parts List CABINET DRYER MODEL NUMBER MCG8000AWW. When requesting service or ordering parts, always provide the following information:

Washer-Extractor Pocket Hardmount

MFR35MCATS : 01 - CONTROL PANEL (MC) [1/25] Ref # Part Number Qty. Description PLATE, BACK-UP (COIN METER) PANEL, CONTROL 3

Troubleshooting. This section outlines procedures for troubleshooting problems with the operation of the system:

We recommend that when you need spare parts, you should use only original parts.

Automated Liquid Handling Station

For system diagrams and component identification

CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS PRIOR MLS COVERED IN THIS MANUAL

Toaster TX-208BK. PRINCE CASTLE Toaster TX-208BK NO ONE WORKS HARDER TO KEEP YOU COOKING. WHALEY FOODSERVICE REPAIRS ITEM PART NO. NO.

SECTION 7. PARTS INFORMATION

Giotto and Cellini Evoluzione machine range

RVDW324 : CABINET AREA [1/8]

Washer-Extractor Pocket Hardmount

SECTION 5 PARTS LISTS & EXPLODED VIEWS

Eclipse 2000 Service Parts

Parts List. Stackable Crescent Cuber. Models KM-1601MRJ/3. hoshizakiamerica.com

SECTION 3. PARTS INFORMATION

Washer-Extractor. Parts. Pocket Hardmount. Refer to Page 3 for Model Numbers. Model UW125PV. Models UW125AV and UW125VV

DIG-220. Single System Manifold. Power Supply. Digital Power Supply CE Version. Single System Manifold Types Manifold Assy with 5 Blade Cell 5

SECTION 7. PARTS INFORMATION

Spare Parts List - DUO 500 & DUO 2

Parts Catalog SLICING MACHINES

M O D E L S E S T / E S T T A L L PARTS MANUAL Rev 1.08 C M A D I S H M A C H I N E S K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841

Commercial Dryers. Parts. Metered and Nonmetered. Refer to Page 3 for Model Numbers. DRY727C_515207

Service Lev. Parts - - KEA KIT, WIRE HARNESS 03-CRS, EXHAUST SIDE STARTER 1 A 1 -- KEA INS WIRE HARNESS KIT INSTRUCTIONS

Repair Parts List WASHER MODEL NUMBER MFR35PCAVS. When requesting service or ordering parts, always provide the following information:

SC D, 20R Advance

Milkshake Machine Taylor C606: Overview

Solstice Electric Fryers SE Series Service Manual

PARTS LIST WRANGLER 2625 DB

DCM24 Convection Microwave. Oven and Cabinet Control Panel Door

XLR-8 60 Extended Rack Autosampler

Washer-Extractor Pocket Hardmount

CABINET LINER AND DOOR PARTS For Models: KUIS15NRTW1, KUIS15NRTT1, KUIS15NRTB1, KUIS15NRTS1 (White) (Biscuit) (Black) (Stainless Steel)

Service Quantity Lev. 2 A FOR P-CLAMP

CHAPTER 4 PARTS PARTS BY PICTORIAL. This chapter describes assemblies/subassemblies/parts considered replaceable at on-site field installation.

Repair Parts List DISHWASHER MODEL NUMBER MDB9150AWS. When requesting service or ordering parts, always provide the following information:

STEAM N HOLD PARTS MANUAL S/N to 35389

Model : WSN11. Refrigerant SPARE PARTS LIST FOR EXPORT Specifications : 2 Doors No Frost Refrigerator. Specific parts for specific countries

Transcription:

ChemWell Replacement Parts & Accessories Description ChemWell Duffle Bag ChemWell Mouse Pad Photometer Calibration Kit Reagent Cooling Accessory Ordered with New ChemWell - RCA (230V) Reagent Cooling Accessory Ordered with New ChemWell - RCA (115V) Part No. SN Accessories: 002900 029200 029034 029040 029041 Reagent Cooling Accessory (add RCA to ChemWell without RCA; requires new reagent rack mover assembly - S/N required) RCA Ready Kit Installed at Factory PC Software Upgrades DVD, Service & Maintenance RCA Kit for RCA Ready Machine Installed in Field - 220V RCA Kit for RCA Ready Machine Installed in Field - 110V 029085 029014 029064 029087 029086 Belts: Plate "X/Y" Mover Drive Belt 132050 Probe "X" Mover, Small Drive Belt 132048 Probe "X" Mover, Large Drive Belt 132049 Probe "Z" Mover Pulley Belt - New Style (s/n) 132060 Probe "Z" Mover Pulley Belt - Old Style (s/n) 132063 Rack "Y" Mover Pulley Belt 132060 Washer Pulley Belt 132060 Bottles: Picture

Bottle Stand for 3 Bottles 994073 Bottle Stand for 4 Bottles Prime Bottle (1L) Prime Bottle Cap Assembly (1L) Prime Bottle Seal 994074 994040 029053 132055 Rinse Bottle (1L) with Sensor Cap 994080 Wash Bottle (2L) with Sensor Cap 994081 Waste Bottle (2L) with Sensor Cap 994075 Prime Bottle (1L) with Plain Cap 187104 RCA Air Trap Bottle Kit 029054

Rinse Bottle (1L) with Plain Cap 187108 Wash/Waste Bottle (2L) with Plain Cap 187107 Wash/Waste Bottle (2L) with Plain Cap - Set of 3 Waste Bottle Cap w/sensors Wash 2 Bottle Assembly 187107x3 994060 994066 Cables: Serial Cable - from Computer to ChemWell Additional Cables (description and Serial Number Required) ChemWell Cable Chart Label Cable Adaptor USB to RS-232 USB Cable 104460 Aerosol Shield with Hinges - Model 2900/2901 (Serial No.) Aerosol Shield 2910 Cover left side 2910 Cover right side 2910 Cover top 2910 Cover lower front 2910 Cover Plate "X/Y" 2902 Cover left side 2902 Cover right side 2902 Cover top 2902 Cover lower front 2902 Cover Plate "X/Y" 2910 Probe Shield Assembly - Model 2900/2902 Probe Shield Assembly - Model 2910 990101 990102 962930 962931 962932 962933 990116 962962 962963 962964 962965 990121 990112 990119 140210 104410 104455 Covers: Cover Coil 963023 Cover Probe Z Actuator 963024 Firmware: Firmware Upgrade Kit for Main and COP Boards (Model No.) 029023 Heads and probes: (Note most items are SN specific) Floating Probe Upgrade Kit - includes new Probe & Z Mover Assys 029037

8 Probe Wash Head 997425 Sample Probe Assembly for long tip (Serial Number Required) 994217 Sample Probe Replacement Tip - 33mm 102215 Sample Probe Replacement Tip - 53mm 102217 Sample Probe Replacement Tip - 100mm 102220 Sample Probe Tip Retaining Ferrule 188295 Sample Probe Brace for 100mm Tip 188656 Replacement Coil Assembly with Probe Assy (S/N required) 994116 Probe "Z" Actuator w/igus Chain & Coil ((after SN: 1750) 029072 Probe "Z" Actuator (after SN: 1750) Coil Replacement w/igus Chain w/o Actuator (after SN: 1750) s/n 1270+ s/n 1270+ 029062 029063 Microwell Work Station: Carrier Insert for Microwells 188171 Heat Block 188057 IGUS Chain Assembly - Old IGUS Chain Assembly - New Plate Cover (plastic) Plate Carrier Upgrade (Must order Main & COP Eproms) 994138 994238 990113 029090

Plate Carrier w/o Carrier Insert 994237 Plate "Y" Mover Assembly Plate "Y" Mover Assembly with Heater Assembly Plate "X" Actuator Assembly Plate "X/Y" Cover (2900) Plate Diffuser 994234 994236 994133 990115 110113 Pulley for Plate X ( big hole) 188165 Plumbing Components: Complete Bottle Set with Sensor Caps and Tubing Harness - 3 Bottle Set (does not include Prime Bottle) 994008 Diluter Pump Jumper Cable Diluter Resistor Upgrade Kit Drip Tray Assembly 029047 164724 994135 Orange O-Ring for Probe Assembly 132070 Pressure Sensor 100101

Wash Cup for Sample Probe (long) 994098 Wash Cup for Sample Probe (short) 994101 Wash System (8-Probe) Waste Trough Assembly 994124/994150 994103 Printed Circuit Assemblies & IC's: M82c54 M82c55 Mosjet, IRF Z 14 163006 163062 163531 PCA, Coprocessor (Serial Number required) 995320 PCA, Daughter (Serial Number required) PCA, DC Junction PCA, Lamp Junction PCA, LED Display 995330 995333 995322 995336 PCA, Main (Serial Number required) 995310 PCA, Main 3400 PCA, Opto A 995350 995314 PCA, Opto E Phototransistor 995318 PCA, Photometer (Serial Number required) PCA, Photometer LED 995321 995323

PCA, Plate Interface 995337 PCA, Plate Junction 995331 PCA, Power Supply, 12v - UPS65 PCA, Power Supply, 24v - UPS110 PCA, Probe "X" Junction (Serial Number required) PCA, Probe "Z" Sense Heat Control - 75mm 995338 101101 995312 029056 PCA, Probe "Z" Sense Heat Control Upper-100mm 995345 PCA, Probe "Z" Sense Heat Control Lower-100mm 995346 PCA, Probe "Z" Junction - 75mm 995313 PCA, Probe "Z" Junction - 100mm 995344 PCA, Rack Juntion PCA, Relay Junction Processor, Z180 IC, 24LC08B Microchip ULN2003 Small PCA Kit (Lamp Junction, Opto A, Opto B, Photometer LED) Serial Number Required 995311 995334 163090 163082 163007 Impellar 110V Impellar 220V RCA Pump 110V RCA Pump 220V Syringe Actuator for 34XX Syringe Pump Assembly for 2900 (w/o syringes) 105142 105139 105141 105140 994107 3400SP 029029 Pumps:

Syringe Pump Assembly for 2910/2902 (w/o syringes) 3410SP Syringe, 50uL 105184 Syringe, 2.5mL 105185 Syringe Pump Manifold Tip seal for 50uL Syringe Tip seal for 2.5mL Syringe Tool for installing seals Vacuum Pump, Washer System (S/N Required) 994142 105186 105187 188066 105160 Tubing: Diluter Tubing Replacement Kit 029020 Drain Tube Tee RCA Tubing Kit Valve Tubing Kit Washer Tubing Kit - External Washer Tubing Kit - Internal Waste Tubing (6 Feet) 137154 029055 029057 026120 029058 135237 Valve Tubing Repair Kit 29071 Bleed Valve Assembly Replacement Kit 029008 Check Valve 137150 Control Pressure Valve Assembly Replacement Kit Diluter Valve (solenoid style) Diluter Valve Upgrade Kit (convert rotary style to solenoid style includes Main PCA Dispense Valve Kit (wash, rinse) T Connector Valve (Black) 029007 994142 Valves: 029006 029009 188141 Racks: Reagent Rack, Standard Combo (15 Round & 12 Square bottle spaces) 994111 Reagent Rack, Custom Combo (44 Misc. size bottle spaces)* Reagent Rack, 24 Round (30mL) spaces* Reagent Rack, 27 Round (15mL) spaces* RCA Insulated Reagent Rack (27 Round/Square spaces) RCA Insulated Reagent Rack (44 misc. spaces)* 994118 994115 994119 029050 029051 Sample Rack, 96 Round sample spaces (12 mm) 994113

Sample Rack, 96 Round sample spaces (13 mm) Sample Rack, 54 Round sample spaces (16mm) Quantity Discount - 5 or more of same style ordered at once Custom Racks (specify requirements)* 994121 994199 Call for Quotation *These Racks require custom rack files for use Consumables: Blanking Solution Kit 029018 Exhaust (Aerosol) Filter 137140 Lamp, Photometer, Xenon 112007-29 Lamps for chassis (set of 2) 112080 Performance Check Kit 029019 Plate Wash Kit 029017 Reagent Bottle (15mL) 12 per package 187110 Reagent Bottle (30mL) 12 per package 157409 Sample Vial Caps (500 per pkg) 157335 Sample Vials (500 per pkg) 157333 Strip Tray (box of 10) Uncoated Microwell Strips (320 per box) Wash Head Vacuum Check Pad Kit Wash Head Cleaning Wire -.035/.018 Accessory Tool Kit Distributor Kit (1 each of the kits below, plus: Temp. Cal. Probe, 37C Ref. Plug, Temp Probe Block, Sample Probe, Accessories Bag, Service Manual, and SyringeTool) Fitting Kit (3 washers, 3 "O" rings, 3 fittings, 1 coupling 157201 157202 029011 185895/96 Tools & Parts Kits: 29010 029015 029016

Flange Bearing Kit for Diluter Pump Flaring Tool Kit Flexible Cables Upgrade Kit Fuse Kit (2 ChemWell, 2 power supply) Jack Shaft Pulley Assembly Kit O-Ring Insertion Tool 034001 029088 029035 029022 029052 188660 Opto-Sensor Kit (S/N Required) 029021 Photometer Spares Kit (2 lamps, 2 diffusers, 1 belt, 1 felt pad) 029024 Plate Cable Upgrade Kit Spare Parts Kit (misc. screws, washers, nuts, connectors) Tool Kit (lubricant, hex keys, clean-out wires) Temperature Calibration Probe Temperature Calibration Plug Vacuum Pressure Gauge Kit 029033 029025 029026 993950 993951 029012 Misc. Items: Aperture Block (holds diffusers) 188256 Channel Block Chemwell Label Filter, Replacement for originally installed wavelength ("XXX" = nm) Filter Wheel, 8 position with standard filters Flexible Plate Shaker Supports Hex Keys (set of 3) 188251 183829 111XXX 996040 029061 153022, 023, 024 Lubrication Oil 029031 Motor, 12V DC for Probe Z Mover 029059 Motor, Filter Wheel 105127 Motor, Plate / Rack, "X / Y" 105129 Motor, Shaker 994083

Motor, Washer Probe Operators Manual, additional copy Photometer Assembly Power Cord, European Style Power Cord, US Style Probe Shield Velcro Fasteners (pack=8 each) 105131 Manual OP 997029 137221 137521 188179 Probe "X" Drive Motor Assembly for 33mm or 53mm Probe 029027 Probe "X" Drive Motor Assembly for 100mm Probe 029073 Probe "Z" Mover Assembly (entire assembly with coil) 994214 Probe "Z" Rod & Shuttle Assembly 029032 Shipping Parts Kit 029028 Shuttle for Rack Mover 188363 Shuttle for "X" Plate Mover 188352 Shuttle for "Y" Plate Mover & Rod (Serial Number Required) USB Port Kit USB Cable "Y" Rack Mover Actuator "Y" Rack Mover Assembly - New 188152 996410 104455 994126 994128 PCA, Plate Heater 995368