THE MOST FAMOUS NAME IN HOISTS.

THE MOST MOUS NME IN HOISTS.

Global King TM THE MOST MOUS NME IN HOISTS. Yale s leadership in the hoisting industry has stood for quality for 00 years! It all began in 875, when Linus Yale invented the Differential Hoist launching the monorail hoist industry. Since then, the Yale company has contributed numerous advancements, as well as a continued introduction of safety-oriented accessories like the Weston Screw Load rake, first introduced way back in 879. Quality engineered and performance tested, Yale products, like the company itself, are built to last. YLE ELETRI HIN HOISTS are designed for H4 duty (00 starts/hour, 0 minutes/hour on time), which meets most heavy-duty industrial applications. YLE s range of specifications and features have made it the perfect solution for thousands of hoists sold in industries such as: utomotive hemical Plants Pulp and Paper abricating Shops/Machine Shops Lumber Mills Marine Manufactured Housing oundries and Steel Mills onstruction Shipping Receiving and Warehousing Textile Plastics Yale also offers special hoists for specific industries ood Handling and Pharmaceutical Options include clean hoist (no paint) or D approved epoxy enamel paint, stainless steel lower block, hooks and chain and food grade oil for gear transmission. orrosion Resistant / Plating pplications Options include zinc-plated load chain and hooks, zinc-plated or anodized lower block, motor shaft seal and sealing of electrical joints. Explosion Proof and Spark Resistant eatures Hoist options allow for use in lass, Div., Group & D applications and lass, Div., Group & G Options include NEM 7 panel for lass, Div. and NEM 4/ panel for lass, Div., stainless steel load chain, hook & lower block and intrinsically safe relays. Precision Handling Yale offers a wide range of hoisting speeds to suit your application. Optional -speed control (: speed ratio) or variable frequency control (0: speed ratio) will offer precision handling control of loads. Outdoor Service Weather resistant options such as zinc plated load chain, water resistant covers and sealing of electrical joints make the hoist a good choice for use in outdoor applications. There s a YLE HOIST for every job. Think Safety, Think Yale Standard safety features: Overload lutch prevents and protects operator, hoist and supporting structure from lifting excessive loads. Electronic Upper & Lower Limit Switch utomatically shuts down power to the hoist, preventing lower block from two-blocking into hoist frame. Easy adjustment with a press of a button. Designed to meet SME/NSI 0.6, S, NE electrical codes and is ISO900 certified.

Yale Model KEL Electric Hoist utaway NEW Heavy-Duty Motor rake spring set disc brake for positive braking action and long life with minimal maintenance. Easy -step adjustment procedure. Overload Protection Prevents lifting loads beyond the hoist s load range, which may damage the hoist or supporting structure. Optional mechanical load brake available. Suspension Hook suspension permits portability of the hoist while lug suspension reduces headroom and can be used with any of our rigid-mount trolleys. New design allows easy change out of either hook or lug suspension. Gearing Totally enclosed, oil-bath lubricated for long life. High-Torque, Heavy-Duty Hoist Motor Motors are H4 0-minute rated with class insulation and include a thermal actuated switch (TS) embedded in the motor winding for protection. Load Sprocket & hain Guide Provided with a full floating chain guide that assures proper engagement of chain on sprocket. Lower lock Provided with a 60 rotating hook riding on thrust bearings. The hook is provided with a spring-loaded latch as standard. Push-utton ontrols Standard push-button control station is contoured for operator comfort allowing easy one-handed sure grip control and provided with a weatherproof NEM-4X enclosure. The push-button cable is provided with built-in strain relief to help prevent cable damage. Specifications apacity Range Lift Lifting Speed /4 thru tons 0 feet standard, additional lifts available. 5 to 64 PM Power Supply 5/0-60 HZ; 0/460--60 reconnectable or 08 and 575--60 single voltage ontrol Suspension Push-button control voltage of 5-volts standard on all models. 4-volt control optional. Hook and Lug Paddle Limit Switch Paddle upper & lower control limit switch standard on all hoists. Hoist ontrols Single speed (standard) or optional two speed and variable frequency for precision handling is located under a removable cover for easy access. Powder oat inish Provides a long lasting durable finish and added resistance to corrosive environments. hain ontainer Included as standard for lifts up to 0' (/4- ton capacities) or 0' for & ton capacities. Die-ast luminum lloy Housing and rame Lightweight & rugged. Housing is precision machined for accurate gear and bearing alignment. ll hoists are built in compliance to SME/NSI 0.6 standards and NE electrical codes. Yale Model KEL electric hoists and motor-driven trolleys are S approved and are ISO900 certified.

Global King Model KEL Hook & Lug Mounted Electric Hoists TM Single speed standard. Optional -speed or variable frequency control available for precision load spotting. Heavy-duty spring set motor brake with easy -step adjustment procedure. Gearing totally enclosed in oil-bath lubrication for long life. High-torque H4 rated heavy-duty motor with lass insulation with thermal actuated switches embedded in the motor winding for protection from overheating. Weatherproof NEM-4x enclosed push-button control station specially contoured for operator comfort allowing easy one-handed sure grip control. Paddle upper & lower hoist travel limit switch. Powder coat finish provides long lasting durable finish and added resistance to corrosive environments. Overload protection prevents lifting excessive loads. hoice of either hook suspension permitting portability of the hoist or lug suspension which reduces valuable headroom. ll hoists are built in compliance to SME/NSI 0.6 & S standards, ISO certified and NE electrical codes. Hook Mount E 0 5/6 D E Lug Mount 0 5/6 G Tread Line X X D /6 Y 5 /8 Specifications & Dimensions /6 Y 5 /8 This dimension becomes -5/6" for speed and -/ HP models only. apacity Hoist Lift Parts of Net X*** Motor E** atalog # Speed hain Weight Hook Lug Hook Lug D Max. G Hook Lug Y tons PM H.P. lbs in in in in in in in in in in in in KEL56 6 /4* 77 /4 KEL5 / 80 6-/4 6-/6 -/8 -/6 5 6-5/6 4-/4-9/6 5/6 7-/ 7-5/8 9-/ KEL564 64 77 / KEL506 6 / 80 KEL50 8 6-/4 6-/6 -/8 -/6 5 6-5/6 4-/4-9/6 5/6 7-/ 7-5/8 9-/ KEL008 8 / 88 KEL06 6 89 7-/ 7-/8-7/6 -/8 5-/8 6-5/6 4-/4-5/6 -/8 7-7/8 7-/4 9-/ KEL0 -/ 95 KEL004 4 / 0 KEL008 8 -/6 -/8 -/6 6-/8 5-/6 4-/4 4-9/6 -/6 -/ -5/8 0-/4 KEL06 6 -/ KEL005 5 6 KEL00 0 -/ 46 5-7/8 6-5/6 4-/8 4-7/8 7-7/8 7-/8 4-/4 5-7/8 8-7/8 9-/4 -/4 * Two speed hoist has a / H.P. motor ** Maximum length between one & two speed model hoists. onsult factory for exact dimensions. *** Dimensions based on lifts thru 0 ft (/4 - Ton capacities), thru 5 ft lift ( Ton capacity) and thru 0 ft lift ( Ton capacity) 4

Model KEL Lug Mounted Electric Hoists with Motor Driven Trolleys One & Two Speed Hoists Single speed standard. Optional -speed or variable frequency control available for precision load spotting for both hoist and trolley motions. Heavy-duty spring set hoist motor brake with easy -step adjustment procedure. Trolley worm gear design provides smooth stopping performance. Hoist gearing totally enclosed in oil-bath lubrication for long life. Weatherproof NEM-4x enclosed push-button control. Paddle upper & lower hoist travel limit switch. Hoist overload protection prevents lifting excessive loads. ll hoists and trolleys are built in compliance to SME/NSI 0.6 & S standards, NE electrical codes and are ISO 900 certified. /4, /, & Ton Trolley Ton Trolley 4-7/8 G min E K 0-5/6 -/6 5-/8 J TRED LINE X (dia 4) Wheel L Y M H D 4-7/8 K G min E 0-5/6 -/6 5-/8 J TRED LINE (dia 4) Wheel X Y M TON H L D Specifications & Dimensions This dimension becomes -5/6" for speed and -/ HP models only. apacity Hoist Parts Lift Net atalog Speed Motor of Weight G Number hain E** D Max. Max. Max. J K L Max. M Max. X*** Y H tons PM H.P. lbs. in in in in in in in in in in in in in in KEL56 6 /4* 6 /4 KEL5 / 65 7-/6 0-/6 KEL564 64 64 / KEL506 6 / 65 KEL50 66 KEL008 8 / 7 KEL06 6 74 KEL0 -/ 8 KEL004 4 / 07 KEL008 8 09 KEL06 6 -/ 0 KEL005 5 96 KEL00 0 -/ 04 5 6-5/6 4-/4 4-/8 0-/8 7-/6 0-/6 5 6-5/6 4-/4 4-/8 0-/8 -/4 -/6 -/4 -/6 -/4 -/8 6-/8 7-/6 4-/4 4-/ 0-/ 4-/8 -/4 -/4 7-9/6 5-9/6-7/8 7-7/8 7-/8 4-/4 4-/4 8-/ 4-/6 -/4 -/4 6-/6 -/4 6-/6 -/ 7-/6 7-7/8 9-/ 7/6 7-7/8 9-/ 7/6 7-7/6 0-/6 5 6-5/6 4-/4 4-5/6 0-/8 -/6 -/6 -/4 6-/6 7-7/8 9-/ 7/6 * Two speed hoist has a / H.P. motor ** Maximum length between one & two speed model hoists. onsult factory for exact dimensions. *** Dimensions based on lifts thru 0 ft (/4 - Ton capacities), thru 5 ft lift ( Ton capacity) and thru 0 ft lift ( Ton capacity) 5 8-/4 0-/4 /6 0-/ -/4 7/

Global King Model KEL - VD Electric Hoists TM Variable speed control with single speed motor. Minimizes high-starting current on motor which helps keep it cool extending life of motor and also permits increase in motor run-time and starts/stops over standard contactor control. Electronic reversing, multispeed operation (up to steps) eliminates conventional magnetic contactors which are wearable components. Voltages available are 80-460//60, 08-0//60 and 08-0//60. 0: speed ratio permits precise positioning for load spotting. H4 duty rating. -step infinitely variable push-button control standard. -step also available. Thermal overload protection. ault recorder helps troubleshoot various problems. such as power related issues. programmable outputs. Hook Mount E 7/6 D Lug Mount E 7/6 TRED LINE X H X H D 5 /8 /6 Specifications & Dimensions Y apacity Hoist Lift Parts of Net X** Motor E* atalog # Speed hain Weight Hook Lug Hook Lug D Max. G Hook Lug Y tons PM H.P. lbs in in in in in in in in in in in in KEL56V 6 /4 77 /4 KEL5V / 80 6-/4 6-/6 -/8 -/6 5 6-5/6 4-/4-9/6 5/6 7-/ 7-5/8 9-/ KEL564V 64 77 / KEL506V 6 / 80 KEL50V 8 6-/4 6-/6 -/8 -/6 5 6-5/6 4-/4-9/6 5/6 7-/ 7-5/8 9-/ KEL008V 8 / 88 KEL06V 6 89 7-/ 7-/8-7/6 -/8 5-/8 6-5/6 4-/4-5/6 -/8 7-7/8 7-/4 9-/ KEL0V -/ 95 KEL004V 4 / 0 KEL008V 8 -/6 -/8 -/6 6-/8 5-/6 4-/4 4-9/6 -/6 -/ -5/8 0-/4 KEL06V 6 -/ KEL005V 5 6 KEL00V 0 -/ 46 5-7/8 6-5/6 4-/8 4-7/8 7-7/8 7-/8 4-/4 5-7/8 8-7/8 9-/4 -/4 5 /8 /6 ** Maximum length for phase model hoists. onsult factory for exact dimensions. *** Dimensions based on lifts thru 0 ft (/4 - Ton capacities), thru 5 ft lift ( Ton capacity) and thru 0 ft lift ( Ton capacity) Y 6

Model KEL Electric Hoist Options & ccessories Weather Resistant Weather resistant options such as water resistant covers, zincplated load chain, upper & lower hooks and sealing of electrical joints permit the hoist to be used for outdoor applications. Heavy-Duty rigid mount trolleys for heavy-duty service traverse applications Designed for use specifically with YLE lug mounted electric chain hoists. The wheels are heat treated forged steel with dual tread design for operation on either S or wide flange beams. Sealed precision ball bearings and heavy gauge steel side plates provide a heavy-duty unit. Optional drop lugs available. Electronic Limit Switch Electronic upper & lower limit switch only requires a press of a button to set your hook travel limits. Lug suspension brackets Used to convert hoists from hook to lug suspensions. Must be used to accommodate rigid mount push, handgeared and motor-driven trolleys. ood & pharmaceutical Service Options lean hoist (no paint) or D approved epoxy enamel paint, stainless steel load chain, hooks & lower block, and food grade lubrication. Push-button station ll motions can be controlled from a convenient, easy to operate NEM 4X push-button station. Push-button stations are available for one and two speed, or variable frequency applications. able Reels Spring loaded reels keep power conductor cables taut and out of the way. Suitable for use with YLE and other electric hoists and trolleys. able reel is stationary type with a 40 pivot base. 7

Model XL Electric hain Hoists Global King TM Packed with power. Introducing the new Yale Electric hain Hoist for to 7/-ton lifting applications. Ideal for automotive, heavy manufacturing, paper mills, and other industries. The heavy-duty motor and gearing assure reliable load lifting, day after day, even under tough conditions. The Yale XL Electric hain Hoist features: orged 0-pocket oblique-lay liftwheel for smooth chain operation, constant chain speed and reduced chain wear. Gearing operates in oil bath. Designed for exceptionally long life and quiet operation. Heavy-duty multiple disc braking system. Hardened, forged steel, latch type hooks. Hoistaloy load chain for long, dependable service. Thermally protected heavy-duty hoist motor. Standard Protector overload device. Standard screw-type limit switches. Easy installation and maintenance. Provides high reliability and long life. Rated H-4, heavy duty. actory tested at 5% of rated capacity prior to shipment. Oblique-lay liftwheel 0-pocket liftwheel orged alloy steel, machined and heattreated for additional strength and durability Smooth chain flow True vertical lift Heavy-duty hoist motor with regenerative braking Hoist motor designed for industrial applications. Integral motor design: Meets and exceeds HMI (Hoist Manufacturers Institute) duty cycle rating for heavy-duty service (H-4) Provides efficiency and cooler operation for longer life Gives substantially higher duty cycle for greater productivity Uses efficient regenerative braking that avoids heat generation or power reduction in power train Thermally protected Single speed or : two speed option Low voltage 0V control circuit 0-minute rated motor ast acting brake Machined and heat-treated, case-hardened gears Triple reduction helical gear system operates in oil bath and provides: Superior service and maintenance characteristics Smooth operation/reduced wear Extremely long life Multiple-disc electric hoist brake Heavy-duty electric hoist brake provides positive load control. Performance features: Eliminates heat buildup found in mechanical type braking systems Securely holds load, even in event of power failure Requires little maintenance, minimal adjustments Extra long-lift adjustable screw limit switches are standard equipment. Tailor hoist operation to suit your specific application. djustable screw limit switches: ome factory set for full hook travel, but easily adjust for any desired position Prevent overtravel of hoist load chain Hold settings even after engaging YLE XL Protector ast aluminum alloy housing and covers. Integral frame and housing design provides lightweight low-profile hoist for: Minimum headroom/maximum lift etter heat dissipation from motor and gear train for increased longevity actory weatherproofing or acid protection available for use in adverse conditions Standard overload protection. YLE XL Protector takes the worry out of hoist operation through: actory calibration Positive overload protection that prevents lifting of dangerous loads Extra security in the event of limit switch mis-adjustment or mis-phasing of power leads 8

XL-Hook Suspension XL-Plain Trolley and Geared Trolly XL-Motor Driven Trolley ( Ton) XL-Motor Driven Trolley (-7.5 Ton) TLOG NUMERS, SPEIITIONS & DIMENSIONS apacity Parts Hoist Lift Dimensions (in.) Motor of Net Speed atalog hain # ** D E H J K L M N P S T*** U*** V W Y**** tons PM H.P lbs in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. YXL08.5 YXL04 68 8 /6 9 /4 8 7/6 8 /8 9 / / 5 /4 0 /6 4 /6 / / 5 /4 7/6 4 /6 6 - / /8 5/6 YXL00 4 5 6 7 /* 8 4 0 9 5 9 5 6 8 9 5 6 8 0 6 0.5.5 5.5.5 5.5.5 5.5 5.5 YXL009 YXL0 YXL05 YXL0409 YXL04 YXL045 YXL0506 YXL0508 YXL0509 YXL05 YXL055 YXL0606 YXL0608 YXL060 YXL07.506 YXL07.50 44 44 474 474 484 5 5/6 5 5/6 5 5/6 5 5/6 6 /6 6 /6 0 7/6 0 /6 0 /6 0 /6 0 /6 0 /6 /8 /8 /8 /8 /8 /8 5 / 5 / 5 / 5 / 5 / 5 / 9 /8 /4 4 /6 4 /6 4 /6 4 /6 4 /6 5 /6 /6 /6 /6 /6 /6 9 0 / 4 5/8 /6 5/8 *Hook mount not available on 7 / ton capacity, ** '' dimension represents largest dimension between hook and lug suspension. onsult factory for exact dimensions. *** Dimension based on 0' lift. **** Geared trolley dimension only. Standard beam flange adjustable range - -Ton (." - 5.55"); - 7 / Ton (4.00" - 6.5"). Minimum radius curve - & Ton (4 ft.); 4-7 / Ton (6 ft.). Dimensions listed are for minimum size 'S' beams. 7 / 7 / 7 / 7 / 7 / 6 / 6 / 6 / 6 / 6 / 5/8 5/8 5/8 5/8 5/8 0 0 0 0 0 7/8 7/8 7/8 7/8 7/8 /8 7/6 7/6 7/6 7/6 7/6 /8 /6 /6 /6 /6 /6 4 /6 4 /6 4 /6 4 /6 4 /6 4 /6 6-6 - 6-6 - 6-6 - /4 /4 /4 /4 /4 /4 5/8 5/8 5/8 5/8 5/8 5/8 7/8 /8 /8 /8 /8 /8

Model YJL Electric Hoists Global King TM Yale YJL Models Designed for industrial-duty performance. ompact in size, the YJL has standard features such as a multiple disc motor brake, overload clutch, and adjustable limit switches. eatures ive-pocket Load Sheave Increased chain and sheave engagement 5% over hoists with conventional fourpocket sheaves. Provides smoother lifting and reduces chain wear. Mechanical Overload Protection Device Helps protect hoist, operator, and supporting structures from damaging overloads, chain jamming and reverse phasing. Limit Switches djustable to regulate upper and lower load travel. Multiple Disc Motor rake Heavy-duty design for reliable operation. Direct acting for positive load holding and spotting. Lug Mount Oil ath Transmission Precision machined alloy steel gears run in oil bath for longer, quieter operation. Manual and Motorized trolleys Single and Dual Speed Models. Precision Trolley Wheels Dual tread trolley wheels fit either flat or tapered I-eams. lso available in bronze or stainless steel. Patented track wheels are available. Lifetime warranty. Specifications apacities & Lifts Rated loads from /4 to Tons Metric Rated. Standard lifts of 0, 5, and 0 feet. Other lifts available. S approved. Voltages 5/0 single phase; 0/460, 08, 80, 45, 575 three phase 60 Hertz standard, 50 Hertz available. Hoist Motor Steel housing and lass Insulation for longer life. -speed with to speed ratio available. H4 Duty Rating Handles heavy duty work environments. Weather Resistant Hoist is NEM R enclosure. Motorized Trolley Hook Mount YJL with Motorized Trolley Specifications & Dimensions Hoist apacity Lift Part of Net E** atalog # Motor Speed hain Weight max. N L M X*** * tons PM H.P. lbs. in. in. in. in. in. in. in. /4 YJL/4-MT6 6 / 75 YJL/4-MT / 89 7 7/8 5/8 / 0 /8 / 9 7/8 / YJL/-MT6 6 / 89 YJL/-MT 0 7 7/8 5/8 / 0 /8 / 9 7/8 YJL-MT6 YJL-MT8 6 8 04 4 7 7/8 0 5/8 5/8 /6 / / 0 /8 0 /8 / / 7/8 9 7/8 9 7/8 Easy hange Top Suspension Quick onnect hain ontainer * Weight for 0 ft. lift, lug suspension units with motorized trolley. ** Maximum length for two speed model hoist. E Dimension changes to 0 5/8 for single speed model hoists. *** Dimension based on standard chain container for 0 ft. lift (single part chain units) and 0 ft. lift (-part chain units). YJL with Hook & Lug Specifications & Dimensions IE ontrols Hoist Lift apacity Part of Net E**max X*** atalog # Speed Motor hain Weight Hook Lug Hook Lug N O P Q R S Dia. T Dia. Hook Lug * tons PM H.P. lbs. in. in. in. in. in. in. in. in. in. in. in. in. in. in. /4 YJL/4-6 6 / 65 YJL/4- / 79 8 /8 7 /4 /6 / / 0 /8 / 9 7/8 5 /8 / /4 /8 0 /6 9 /4 / YJL/-6 6 / 79 YJL/- 9 8 /8 7 /4 /6 / / 0 /8 / 9 7/8 5 /8 / /4 /8 0 /6 9 /4 YJL-6 6 94 8 /8 7 /4 /6 / / 0 /8 / 9 7/8 5 /8 / /4 /8 0 /6 9 /4 YJL-8 8 04 0 7/8 0 / /4 / / 0 /8 6 7/6 /4 5 7/8 5/6 4 /8 /8 0 /6 9 5/6 * Weight for 0 ft. lift, top hook and lug suspension units. ** Maximum length for two speed model hoist. E Dimension changes to 0 5/8 for single speed model hoists. *** Dimension based on standard chain container for 0 ft. lift (single part chain units) and 0 ft. lift (-part chain units). 0

Yale ir Hoists Yale ir hain Hoist may be the best solution to your material-handling needs. ir hoists are ideal for many conditions that make electric hoists impractical. Yale ir hain Hoists feature variable speed control, so expensive electrical controls are unnecessary. Yale ir Hoist dvantages Precise Load Spotting Lifting and lowering speeds are continuously variable from zero to maximum. Operates In Extreme Heat The air hoist motor is designed for operation under conditions of relatively high ambient temperatures without need for special protection. Higher Speeds or applications where speed is a critical factor in production, Yale air hoists provide very fast lowering speeds. ree rom Hazard of Electrical Shock Since compressed air is the power source, Yale ir Hoists have a distinct advantage over electrical shock hazards especially in wet locations. Spark Resistant eatures Spark resistant options allow air hoists to be used in areas where danger of combustion or explosion from atmospheric conditions exist. Easier To Maintain There are no contactors, transformers, motor windings, fuses, etc. that are typical in electric hoists that need to be checked or replaced. s long as air going into the air motor is good and lubrication is supplied to the air motor, the Yale ir Hoist is very easy to maintain. The most famous name in hoists.

Global King Model KL ir Hoists TM Die-cast aluminum frame - lightweight, rugged, holds shafts and bearings in close alignment. Gearing - combination of precision cut, heat-treated helical and spur gears for quiet, efficient operation. Mechanical load brake - positive action, spring biased Weston type load brake holds the load and provides exact load spotting and control. Overload protection device protects against excessive overloads...clutch also acts at upper and lower limits. Multi-vane rotary air motor - eight vanes provide high torque smooth operation, positive starting and excellent control. Internal Muffler - reduces sound level. Pendant control - pendant throttle handle is of the full flow design for excellent load spotting capabilities. Throttle valve - precision throttle valves meter the air for smooth operation. asic Hoist Data Rated Loads,, and -ton (Spark resistant models are rated at /, and -ton). ir Pressure Recommended 90 PSI Hook & Lug Suspension Specifications apacity Model Hoist atalog # ull Load Lift Speed ull Load Parts of Lowering Speed hain Net Weight tons *PM *PM in Hook / Spark 968 95 / 6 Lug / Spark 969 0 9644 8 9 Hook / Standard 964 0 4 95 Hook / Spark 9684 8 9654 8 06 Lug / Standard 965 0 4 08 Lug / Spark 9694 8 0 9645 6 9 0 Hook / Standard 964 5 Hook / Spark 9685 5 7 46 9655 6 9 6 Lug / Standard 965 5 8 Lug / Spark 9695 5 7 70 9646 4 6 44 Hook / Standard 964 0 4 46 9656 4 6 64 Lug / Standard 965 0 4 66 *Hoist speeds based on 90 PSI line pressure with full rated hoist load ir onsumption 70 SM (full load-full speed) slow speed model; 80 SM (full load-full speed) fast speed model. Pendant ontrol Hose 6 foot pendant hose standard for 0 foot lift hoist, longer hose assemblies up to 6 foot available. Lift 0 foot lifts are standard. Longer lifts are available. Net Weight (asic Hoist) 00 lbs. Suspension Hook or lug ir Inlet Size /4 NPT ir Supply Hose Size /4 I.D. min.

Hook Suspension Specifications & Dimensions apacity Model Hoist atalog # H X Y tons in in in in in in in in / Hook / Spark 968 6-/ -7/6 6-5/8-5/6 6-/8 7/6 7-/6 9-/6 9644 Hook / Standard 964 6-/ -7/6 6-5/8-5/6 6-/8 7/6 7-/6 9-/6 Hook / Spark 9684 -/8 7-5/6 4-9/6 5-/6 /6 9-/ 9645 Hook / Standard 964 -/8 7-5/6 4-9/6 5-/6 /6 9-/ Hook / Spark 9685 4-7/8 4-/8 9-/8 5-7/8 7-/8 /4 0-/4 Hook / Standard 9646 964 4-7/8 4-/8 9-/8 5-7/8 7-/8 /4 0-/4 D E Hook Suspension Lug Suspension 8 D 0 5/6 E J 8 N 0 5/6 N L K E K G Dia X X H 5/8 H 5 /4 5/8 5 /4 Y Y Lug Suspension Specifications & Dimensions apacity tons in in in in in in in in in in in in / Lug / Spark 969 5-/4 6-5/8 6-/8-9/6 -/6 0-/6 -/6 5/8 7/6 6-9/6 9-/6 9654 Lug / Standard 965 5-/4 6-5/8 6-/8-9/6 -/6 0-/6 -/6 5/8 7/6 6-9/6 9-/6 Lug / Spark 9694 7-5/6 5-/6 -/6 -/ -7/8 -/8 -/6 /6 7-/ Model Lug / Standard 9655 965 Lug / Spark 9695-5/6 9-/8 7-/8 -/6 -/4-7/8 -/4 /4 9-/4 Lug / Standard Hoist atalog # 9656 965 E J K L M 7-5/6 5-/6 -/6 -/ -7/8 -/8-5/6 9-/8 7-/8 -/6 -/4-7/8 N -/6 G -/4 H X Y /6 7-/ /4 9-/4 Spark Resistant Models Spark resistant hoists offer greater protection in hazardous environments. omponents for spark resistance includes bronze alloy hooks with stainless steel hook latches, lower blocks of stainless steel on single part chain and aluminum on and part chain, chrome nickel non-magnetic stainless steel alloy load chain, bronze limit stop with aluminum limit actuators and modified sprocket and guide. spark resistant chain container is recommended on 0 foot lift spark resistant hoists. Spark resistant chain containers are stainless steel. The spark resistant KL air hoists have lower speeds and are derated due to the use of stainless steel load chain. The lower wear life of stainless steel chain limits applications to medium-duty service. When specifying lug suspended spark resistant hoists, care must be taken in the trolley selection to assure that the trolley fits the derated hoist lug. If this is your first purchase, consult the factory for assistance.

Global King Model YL ir Hoists TM Pull cord control provides a lightweight, economical hoist for accurate control of loads. Pendant throttle control hoists offer ergonomic one-handed controls, for ease of operation. Inlet air swivel with built-in strainer provides free hoist movement. luminum frame and end cover contributes to the lightweight, easily portable, and rugged design. Heavy-duty shoe type brake is a proven design for stopping and holding loads in heavy-duty applications. External adjustment screws for decreased lift and lower speeds. External brake adjustment. Limit stops prevent over-travel in upper and lowering directions. Planetary gearing of alloy steel, heat-treated spur gears is accurately machined to provide a close meshed, compact gear reduction. Eight-vane motor provides high torque, smooth starting and excellent control. Tapped exhaust port / NPT...for LEN applications or to add a supplemental muffler in addition to the built-in muffler for even quieter operation. Type Pull ord ontrol apacity Model # Pendant Throttle ontrol Net Weight Model # asic Hoist Data Rated Loads /4, /, and -ton (Spark resistant models are rated at /8 and /4-ton). ir Pressure Recommended 90 PSI Hook & Lug Suspension Specifications Net Weight Parts of Load hain Lifting Speed Max** Lowering Speed Max** tons tons lbs. lbs. in in in Hook Mount Trolleys Standard Models /4 0 7 0 47 65 95 Roller hain / 0 7 04 47 45 0 05 5 06 6 60 /4 6 46 65 95 Link hain / 5 6 6 46 45 0 9 49 0 59 60 Spark Resistant Models Link hain /8 4 6 4 46 60 00 /4 4 49 44 59 9 5 Lug Mount Trolleys Standard Models /4 5 6 5 46 65 95 Link hain / 55 6 56 46 45 0 59 49 60 59 60 Spark Resistant Models Link hain /8 8 6 8 46 60 00 /4 8 49 84 59 9 5 ir onsumption 48 SM at 90 PSI Pendant ontrol Hose 6 foot length is standard. Longer lengths are available up to 7 ft. of lift. ontrol Pull cord or pendant throttle Lift 0 foot lifts are standard. Longer lifts are also available. Net Weight (asic Hoist) 6 lbs. Suspension Hook or lug ir Inlet Size /8 NPT ir Supply Hose Size / I.D. min. ir Exhaust / NPT 4

M J E Exhaust / N.P.T. Inlet /8 N.P.T. M J E Exhaust / N.P.T. Inlet /8 N.P.T. X X Y W Z Y W Z /4 and / ton ton Hook Suspension Specifications & Dimensions Type apacity Pull ord ontrol Model # Pendant Throttle ontrol Model # E J M W X Y Z tons tons in in in in in in in in in in in Standard Models /4 0 0 5-/4 0-/4 4-/4 7-/6 5-/6 6-5/6 0-/6-5/8 0-/8 8-9/6 5-/4 Roller hain / 0 04 5-/4 0-/4 4-/4 7-/6 5-/6 6-5/6 0-/6-5/8 0-/8 8-9/6 5-/4 05 06 8 0-/4 5-/4 7-/6 5-/6 6-5/6 0-/6-5/8 0-/8 9-/6 5-/4 /4 5-/4 0-/4 4-/4 7-/6 5-/6 6-5/6 0-/6-5/8 0-/8 8-9/6 5-/4 Link hain / 5 6 5-/4 0-/4 4-/4 7-/6 5-/6 6-5/6 0-/6-5/8 0-/8 8-9/6 5-/4 9 0 8 0-/4 5-/4 7-/6 5-/6 6-5/6 0-/6-5/8 0-/8 9-/6 5-/4 Spark Resistant Models Link hain /8 4 4 5-/4 0-/4 4-/4 7-/6 5-/6 6-5/6 0-/6 * * * * /4 4 44 8 0-/4 5-/4 7-/6 5-/6 6-5/6 0-/6 * * * * * Spark resistant chain container dimensions can be found in the ir Hoist ccessories section of this brochure 9/6 5/8 dia K M J 7/8 TRED LINE 9/6 G X W 5/8 E Exhaust / N.P.T. Inlet /8 N.P.T. J 7/8 TRED LINE 9/6 9/6 5/8 dia K M Y X 5/8 W Z E Exhaust / N.P.T. Inlet /8 N.P.T. Y Z /4 and / ton ton Lug Suspension Specifications & Dimensions Pull ord Pendant Type apacity ontrol Throttle ontrol Model # Model # E G J K M W X Y Z tons tons in in in in in in in in in in in in in Standard Models /4 5 5-7/8 9-5/8 4-/4 7-/6 5-/6 -/4 6 /6 0-/6-5/8 9-/4 8-9/6 5-/4 Link hain / 55 56-7/8 9-5/8 4-/4 7-/6 5-/6 -/4 6 /6 0-/6-5/8 9-/4 8-9/6 5-/4 59 60 7 9-/4 5-/4 7-/6 5-/6 /4 6 -/6 0-/6-5/8 9-/4 9-/6 5-/4 Spark Resistant Models Link hain /8 8 8-7/8 9-5/8 4-/4 7-/6 5-/6 -/4 6 /6 0-/6 * * * * /4 8 84 7 9-/4 5-/4 7-/6 5-/6 /4 6 -/6 0-/6 * * * * * Spark resistant chain container dimensions can be found in the ir Hoist ccessories section of this brochure 5

Global King L ir hain Hoists TM Rated loads: /4, /,,, and 6 Tons The Yale L air chain hoist is light and portable enough to be carried (the / ton unit weighs only 7 lbs.). This makes it ideally suited for maintenance type operations because it is easily moved from one job to another one hoist can do the work of several. Optional hain ontainers Optional Yale L chain containers are made of tough reinforced PV sheeting for long life. The containers are available for a variety of chain lengths. apacity Lift Part # tons ft in 0 ft. lift ft. lift 40 ft. lift 60 ft. lift / ft. lift 0 ft. lift 0 ft. lift 0 ft. lift /4 & / /4 & / /4 & / /4 & / 6 6 9 ft. lift 0 ft. lift 9 ft. lift 645074 645075 645076 645077 645075 645076 645077 64597000 66400 64597000 646500 s asic Hoist eatures apacities /4 to 6 tons. Lightweight and portable. Economical. ompact dimensions. Disc type motor brake. Efficient planetary gearing. hoose from standard pull cord or optional twist rod or lever pendant controls. Lifetime lubricated gears. Variable speed control. xially located rotary vane type motor. Twin high ratio planetary gear assembly. Top and bottom hooks are drop forged with safety latches. convenient pull control is standard. n optional lever pendant control is available. for the Yale L and offers excellent control for load inching. Pendants are available in lengths of 6.6 feet, feet, 7 feet, feet, and feet. asic Hoist Data ir Pressure Recommended: 90 PSI Lift: 0 foot lifts are standard Trolley Dimensions: ll given for min. I-beam Pull ord Drop: 7 foot drop is standard L HOOK TYPE Outline Dimensions (in) djustment apacity Model # Lifting Speed D Net Wt. Ship Wt. tons fpm lbs. lbs. /4 / 6 L /4 L / L L L6 6 4 / 0 / 5 /4 4 /6 4 /6 7 / 5/8 0 7/8 4 5/6 4 5/6 4 5/8 8 5/6 9 /6 5 /8 5 /8 5 /8 / / /6 /6 /6 7/6 7 7 46 09 75 4 4 5 9 85 L WITH PLIN TROLLEY * & 6 TON L WITH T MOTORIZED TROLLEY Outline Dimensions (in) apacity E G H J its lange Width Min. Rad. urve Net Wt. Ship Wt. tons Min. Max. Min. lbs. lbs. /4 & / 6 4 /6 4 9/6 6 5/6 9 /8 /4 / 4 /4 4 / /4 / 4 /4 4 / 9 /4 0 /6 9 /4 /4 / 9 /.66.00. 4.00 5.00 5.5 6.00 7.00 0 6 60 8 5 60 40 0 8 64 45 Trolley only. * /4 through ton shown with Yale W trolley. 6 ton shown with Yale TP trolley. Many other fine Yale trolleys are available. Outline Dimensions (in) apacity E G H J K its lange Width Rad. urve Net Wt. Ship Wt. tons Min. Max. Min. lbs. lbs. /4 / 6 5/6 5/6 5 5.0 0.0 55 9 99 6 4 5/8 5/8 7 /8 4 7/6 6 5/8 /8 5.70 0.0 70 0 Trolley only. NOTE: Motorized trolley speed at full rated load is 60 fpm at 90 psi and 89 cfm. 6

TMM - 40 ir Manipulator Hoist The TMM-40 is an ideal workstation hoist. Lightweight and portable, the unit weighs less than 0 pounds and operates at 00% duty cycle..75 apacity: Rated loads 00 lbs./40 kg. Efficient rotary vane motor provides high uniform torque for quick response and smooth, quiet operation. Handle-mounted pendant control for one-handed operation and load positioning. Precise and infinite speed control for accurate load spotting. Self-winding lifting cable stores conveniently inside unit. Swivel top and bottom hooks with safety latches standard, for portability and quick installation. Secures load and eliminates drift when pendant is released. /8 NPT air filter-regulator-lubricator is needed for effective operation. Spark resistant features are not available. Lifetime Warranty Ideal pplications - ssembly Lines - Machine Shops - leaning and/or Dipping Operations - Manufacturing Plants - Power Generating Stations - Shipping Departments - hemical acilities - abricating Shops - Repetitive Lifting pplications - uto/truck Repair - Handling ixtures and Dies 4.49.9 7.68.9.58 4. 7.8.6.4 Note: Dimensions are in inches. Specifications & Dimensions Standard Lift Speed w/ load Lift Speed w/o load apacity Model # ir Housing Dimensions Max ir Net Lift Up Down Up Down onsump. Headroom D W L Pressure Weight lbs. ft. PM M in in. psi lbs. 00 TMM-40 6' 6" 6 59 49 9. -/4 7-/ 7-7/8 -/4 70-95 8.7 7

Global King Model XL - ir Hoists TM ontinuous Duty Service Yale XL Model - to 7 / Tons ir hain Hoists features continuous duty service for precise, infinitely variable speed and accurate load spotting. Ideal for use in hazardous areas where electricity is not an option. apacities & Lift - Rated loads from to 7 / Tons.0-foot lifts are standard. Longer lifts are available. Speeds - 9 to feet per minute (PM) at 90 PSI air operating pressure. ontrols - Pendant controls provide precise load spotting. Hook and lug suspension available. Lug suspension is for use with plain, geared and air motor drive trolleys. Motor - 6-vane air motor produces high, uniform torque for smooth, easy lifting. Spool Valve - Precision spool valves meter air for smooth starts. rake - ir actuated motor brake for positive load control. Transmission Gears - Precision machined steel run in oil bath for longer quieter operation. orged Ten-pocket Oblique-lay Liftwheel - or smooth chain operation, constant chain speed, and reduced chain wear. Overload lutch - Protects hoist, operator, and supporting structures from damaging overloads. lutch acts as upper and lower travel limits. Spark Resistant Models - or hazardous environments, includes copper plated hooks and lower bottom blocks, stainless steel hook latch, and plated load chain. Lifetime Warranty Specifications & Dimensions lbs. 4,400 6,600,000,00 6,500 apacity Model # tons 5 6 7 / YXL0 YXL0 YXL05 YXL060 YXL07.509 # of hains Lift Speed* PM 0 9 ir Pressure PSI 90 90 90 90 90 Wt. lbs. 47 4 4 45 45 Metric Rated * Speeds based on 90 PSI line pressure and with full rated load. 8

XL IR WITH HOOK SUSPENSION XL IR WITH HND GERED TROLLEY XL IR WITH IR MOTOR DIVEN TROLLEY Specifications & Dimensions apacity Hoist atalog # ** D E H J K L M N P S T*** U*** V tons in in in in in in in in in in in in in in in in in in YXL0 8 /6 9 /4 8 7/6 8 9 / / 5 /4 0 /6 4 /6 / / 5 /4 5 9/6 4 /6 6 - / 5/6 YXL0 5 5/6 0 7/6 /8 5 / 9 /8 /4 5 /6 0 / 4 5/8 /6 5/8 /8 5 9/6 4 /6 6 - /4 7/8 5 YXL05 5 5/6 0 /6 /8 5 / 4 /6 /6 7 / 6 / 5/8 7 /4 6 /4 /6 5 9/6 4 /6 6 - /4 /8 6 YXL060 6 /6 0 /6 /8 5 / 4 /6 /6 7 / 6 / 5/8 7 /4 6 /4 /6 5 9/6 4 /6 6 - /4 /8 7 /* YXL07.509 6 /6 0 /6 /8 5 / 4 /6 /6 7 / 6 / 5/8 7 /4 6 /4 /6 5 9/6 4 /6 6 - /4 /8 *Hook mount not available on 7 / ton capacity, ** '' dimension represents largest dimension between hook and lug suspension. onsult factory for exact dimensions. *** Dimension based on 0' lift. **** Geared trolley dimension only. Standard beam flange adjustable range - -Ton (." - 5.55"); - 7 / Ton (4.00" - 6.5"). Minimum radius curve - & Ton (4 ft.); 4-7 / Ton (6 ft.). Dimensions listed are for minimum size 'S' beams. Y**** 9

Global King ir Hoists ccessories TM ilter-lubricator Unit ir hoists must have a supply of clean, lubricated air for their operation. filter and lubricator must be installed in the air supply line, as close as practical to the hoist. The recommended operating air pressure for all capacities of YLE air hoists is 90 psi. When air line pressure exceeds 5 psi, it is required that a pressure regulator be provided in the supply line to maintain proper pressure. ilter - Lubricator Units ilter - Regulator - Lubricator Units atalog # Inlet / Outlet Size owl Size. Shipping Weight atalog # Inlet / Outlet Size owl Size. Shipping Weight in oz. lbs. 90960 /8 8 9096 / 8 9096 /4 4 9096 4 in oz. lbs. 90966 /8 4 90967 / 4 90968 /4 4 8 90969 4 8 ullard hooks ll hoists are furnished as standard with hooks equipped with hook latches. ullard Hooks with rugged cast swing gate locking member that provides greater assurance of load containment are available at additional cost. Spark resistant ullard Hooks are not available. Redundant support Hoist suspension redundant support for Series 00 hoist is available for additional cost. This redundant support features a cable that inserts through the hoist frame and around the initial support. Pendant throttle conversion kit Kits for converting the pull cord Model YL ir Hoist to pendant throttle operation has standard 6-foot pendant hose assembly. Longer hose assemblies available. Order atalog No. 69. Shipping weight is 8 pounds. hain containers hain containers provide an ideal means for eliminating hanging tail chains. They are easily installed and accept the chain in such a way that chains tend not to kink or twist. State codes are more frequently calling for use of chain container with each hoist. hain ontainer for YL ir Hoist atalog # hain Type Maximum Lift Shipping Dimension /4, /8, / Ton /4, Ton Weight R S ft ft lbs. in in 906 Link hain 5 4-/ 4-/ 9065 Link hain 45 9 4-/ 7 9064 Spark Resistant 5 5 4-/ 9066 Spark Resistant 45 0 4-/ 7 906 Roller hain 5-6-/ 9 7-/ 906 Roller hain 0 5 -/ -/4 YL KL hain ontainer for Standard KL ir Hoist hain ontainer for Spark Resistant KL ir Hoist atalog # Maximum Lift Shipping Dimension Maximum Lift Shipping Dimension atalog # Ton Ton Ton Weight R S / Ton Ton Ton Weight R S ft ft ft lbs. in in ft ft ft lbs. in in 90544 5 do not use do not use 4 4-/ 0 905444 5 do not use do not use 4 4-/ 0 90545 0 5 0 8 4-/ 5 905445 0 5 0 8 4-/ 5 90546 45 5 0 4-/ 9 905446 45 5 0 4-/ 9 90547 60 0 0 4 4-/ 905447 60 0 0 4 4-/ 90548 75 7 5 5 4-/ 8 905448 75 7 5 5 4-/ 8 90549 90 45 0 6 4-/ 905449 90 45 0 6 4-/ 0

ir Hose ssembly ssembly requires atalog Number for both hose and fittings. ir Supply Hose ittings* Male Swivel at One End - Standard Male at Opposite End atalog # ID OD raid Max. PSI Width atalog # Hose ID Thread Size M-NPT ittings with Quick Disconnect* Quick Disconnect on One End - Standard Male at Opposite End atalog # Hose ID in in ft in in in in 9060 / 5/6 00 0. 9064 / /8 9068 / /8 906 /4 -/4 5 0.5 9065 /4 /4 9069** /4 /4 906 -/ 00 0.65 9066 /4 9060** /4 Thread Size M-NPT * itting installed on above hose. * itting installed on above hose. ** /4 NPT Quick disconnect is without check valve. ir hose trolleys catalog no. 54 (or use with YL and KL ir Hoists) These trolleys are used to support air hose and are installed on the same track as a hoist. The hose clamp swivels and fits 5/8 to -/ inch diameter hoses. Shipped from factory in cartons of six only. Recoil air hose with fitting or application where air hose trolleys with looped hose is impractical; coil type self-storing hose is recommended. Self Storing ir Hose with ittings atalog # Hose Size x Working Length itting Each End I.D. in x ft 906 / x 5 906 / x 5 9064 /4 x 5 9065 /4 x 5 9066 /4 x 50 /8 NPT Male Swivel ittings /4 NPT Male Swivel ittings Nylon oated able with Eyebolt ittings Each End for Supporting Recoil ir Hose (Supports by Others) atalog # Length 9069 5 9060 50 ft Wire ropes festoon systems for air supply hose System includes (note numerical key in illustration at right): () end clamp assemblies; () hardware kit consisting of eye-bolts, 5 clamps and ball stop; () Intermediate carriers - see specified quantity in last column of chart below; (4) Nylon covered wire rope per required length. Hose System (from 0.9 to.5 O.D.) atalog # D 9060 9060 9060 Maximum ombine able Wt. lamp Distance ft ft ft ft lbs. / ft ft No. of arriers (item ) 6 8.5 0.84. 6.87 4.5 0.84.0 8.87 8..40. 6.87 4 7 4 40..40.0 8.87 4 40 4.6.97. 6.87 6 5 4 55.6.97.0 8.87 6 Note: estooning hose and connectors are not included in the system.

Rigid Mount Trolleys Global King TM Designed especially for use with lug suspended KEL, KL and YL Models. Ideal for low head room applications where distance from floor to I-beam is limited. Trolley side plates are of all-steel construction providing maximum strength. Wheels have hardened dual treads ensuring long life and operate on ball bearings for easy travel. Pressure fittings are provided in wheel axles to simplify lubrication. Dual treads allow trolley to run on both I-beam and wide flange type beam applications. Optional patent type wheels available for patent track systems. Hand-geared models, the hand chain operated wheel turns a pinion which meshes with steel gears for ease of operation and accurate spotting. hain guide provided to ensure chain alignment with wheel. nti-tilt rollers are provided on hand-geared trolleys to eliminate the tilting of trolley on beam when operating with a light load or without a load. Optional drop stops and bumpers available. Spark resistant models available, heavy-duty rigid mount trolleys. Rigid Mount Trolleys TRED LINE J J WD G PIN DI H D N TRED LINE WD D H N G PIN DI TRED LINE M J WD H PIN DI Push Trolley /4, / & ton Push Trolley & ton Hand-Geared Trolley /,, & ton Heavy Duty Rigid Mount Trolleys M G N D J WD J WD H D N G PIN DI H Specifications & Dimensions Push Trolley apacity Model # Hand Geared* Net Weight Model # Net Weight lange widths Min. Min. eam Radius Depth** urve tons lbs. lbs. in in in in in in in in in in in in in in Rigid Mount Trolleys / 90540 5 - - -5/8 to 4-5/8 4 ' 6" 4-/8-5/8 -/6 /6 -/8-5/8 5/8 8-/8 -/6 - -/8 90540 - - to 5 8-7/8 - -9/6 905405 4 - - 5-/4 to 7-/8 -/8-5 ' 6" 6-/8-7/8 /6 4-7/8 5/8 5 - - 9054 40 to 5 8-7/8 9-/4-9/6 - - 9054 4 5-/4 to 7-/8 -/8 -/8 90540 4 9054 57 -/8 to 6 0-/8 0-/4 6 5' 0" 6-7/8 -/6 4-7/6 4-5/6 5-/6 905406 44 90544 58 6-/4 to 8-7/8-7/8 -/8 5 905404 50 90547 65 -/8 to 6 -/4 8-/8 905407 5 90548 67 6-/8 to 8-7/8 6 5' 0" 6-7/8 4-/6 5-/4 -/8 4-5/6 -/4 -/4 5-/4 5-/6 9-7/8 6 905408 54 90549 69 9 to 7-7/8 -/8 Heavy Duty Rigid Mount Trolleys 900 5 9006 50 to 5 8-7/8 0-9/6 900 8 9006 5 5-/8 to 7-/4 6 ' 0" 7-5/8-7/8 /4 4-7/8 5/8 -/4 4-7/8 -/6 -/8 900 4 9006 56 7-/ to 9-/8 -/4-5/8 900 45 9007 60 -/8 to 6 9-/ 0-/6 900 48 9007 6 6-/4 to 8-5/8 6 5' 0" 9-/8 4-/8-5/6 4 -/8 -/8 4-7/8 -/8 5 900 5 9007 66 8-7/8 to -/4 4-/4 -/6 900 55 9008 70 4 to 6-/4 6-/ 900 58 9008 7 6-/8 to 8-5/8 6 5' 0" 9-/8 -/4 4-/ -/8 4 -/ -/4 4-/8 4-7/8 7-/6 900 6 9008 77 8-/4 to 6-/4 8-7/8 * Hand-geared trolleys have standard hand chain drop of 9-6. Longer chain available. ** When used on smallest I-eam size, beam must be free of all obstructions such as clips, suspension bolts and nuts. or /4 and / ton applications on wider flange beams, mount on ton trolleys. Dimension is based on largest size beam on which trolley will operate. Dimension increases slightly for each of the smaller beam sizes. D WD Max. G J Dia. H Max. M Max. N 6

Hook Suspension Trolleys apacities from /4 to 5 ton (metric rated). Trolley sides are of all-steel construction for maximum strength. Wheels are steel with hardened treads and roller bearings for easy traversing and long life. Self aligning frames keep the load equally distributed, and are adjustable to fit several sizes of beams. Wrap-around side plates provide additional security to increase operator safety and act as a bumper to protect wheels. Push trolleys are an economical alternative for low duty cycle, lighter capacity applications with lifts under 0 feet. Hand geared trolleys are designed for applications requiring close control of horizontal movement of the hoist and its load. Hand geared trolleys are ideal for those applications where an operator shouldn t be near or touch the load to move or position it. Specifications & Dimensions apacity* Model # ** Standard eam Height I-eam Width Min. Radius urve Wheel Tread Diameter D (TG) J K (TG) K L M N P in in in tons in in in in in in in in in in in in in lbs. Push Trolley /4 TP-005 4 to 4.0 to 8.7 7.6.94.54.8.8 -.6.8-0. 7.56 0.7-9 / TP-0050 4 to 4.0 to 8.7 7.6.94.54.8.8 -.6.8-0. 7.56 0.7-9 TP(G)-000 5 to 4. to 8.7 6.6 4. 5..8.0.60.6.8.0 0. 9.84 0.7 4. 6 -/ TP(G)-050 6 to 4. to 8.7 45.5 5. 5.9.89.60.56.5.78.86 0.47.8 0.79 4. 46 TP(G)-000 6 to 4. to 8.7 45.5 5. 5.9.89.60.56.5.78.86 0.47.8 0.79 4. 46 TP(G)-000 8 to 4.0 to 8.7 55 4.4 6.8 7.09.6.9 4. 4.4 5.0 5.4 0.55 4.57.4 4. 86 5 TP(G)-0500 0 to 4.5 to 8.7 70 4.9 7.09 8..76.78 5.89 4.9 5.6 5.87 0.79 7..6 4. 0 * Metric rated ** When ordering specify P for plain trolley or G for geared trolley Net Weight

Hook Suspension Trolleys Global King TM ompact lose Radius Trolley With revolutionary advances, this shorter, more compact trolley is 50% lighter than competitive trolleys, yet every bit as tough. Series 6 lose Radius Trolley Negotiates radius curves as tight as 7-0. Made of the highest quality rolled steel. Unique double row, ball bearing wheel design provides five times greater wear capacity. Larger V-bars available for wider flange adjustment. or low headroom applications. earings prepacked with lifetime lubricant. Exclusive Dial-it collar quickly adapts trolley to a wide range of beams and patented rails. Dust covers shield and protect bearings. Trolleys available for larger beams, rails and tracks; contact YLE. ast iron trolley guards available (except for ton). Lifetime Warranty. Specifications & Dimensions apacity* Model # dj. for standard S-beam Depth of eam lange width Tread diameter Net weight Ship Weight Min. Radius urve tons in in in lbs lbs in /4 & / 4- -5/8 to 5-/6 -/4 9 7 4 4- -5/8 to 5-/6 -/4 0 7 -/ & 6 6-5 -/8 to 5-5/8 -/ 5 0 0 8-8 4 to 6-/4 -/ 9 0 apacity** Model # D E G H J K L M N P Q R tons in in in in in in in in in in in in in in /4 & / 4-/4 5-7/8 /6 /6 -/4 -/8 7 -/8 -/8 -/6 -/6 7/8 - - 4 4-/8 6 /6 /6 -/4 -/8 7 -/8 -/ -5/8 7/8 -/8 - - -/ & 6 5-5/8 7-/ /8 -/6 -/ 4-/ 9 -/ 4-/8 -/8 -/4-7/8 - - 0 6-/6 8-/6 /6 4-/6 -/ 4-/ 9-5/8 4-/6-5/8 -/8 -/4 4-5/6 /8-7/8 * ll capacities can be supplied for S-beams larger than listed and also for wide flange beams, rails or track with approximately equivalent flange widths ** Dimensions given are for minimum S-beam and will vary with larger beams 4

Hook Suspension Trolleys Push and Hand-Geared Trolleys apacities /4-5 tons. Heavy rolled steel side frames extend beyond the wheels providing superior strength and added protection for trackwheels. Thick section steel clevis suspended from steel equalizer pin. lloy steel axles and equalizer pins are heat treated for maximum strength and wear life. Trolley wheels are fully machined from alloy cast iron and hardened for high strength and long service life. Units /4 through 6 tons employ universal wheel treads for use on flat or tapered beam flanges. 5 ton model operates on merican Standard I-beams with tapered flanges. or patented track, consult factory. Lifetime lubricated, precision ball bearings standard on units through ton capacity. 4 ton trolleys and greater feature eight, sealed Timken, tapered roller bearings and grease fittings. On hand-geared models, a hand chain operated wheel turns a machined steel drive pinion, engaging the two geared wheels. apacity Model # eam lange Width Minimum Radius Net Weight Plain Geared Height urve Plain Geared tons in in in lbs /4 64-005 64-005 4-.66-5.00 0 8 / 64-0050 64-0050 4-.66-5.00 0 8 64-000 64-000 5-.00-6.00 4 4 6 -/ 64-050 64-000 5-.00-6.00 4 45 65 64-000 64-000 6-8.-6.5 0 67 90 64-000 64-0400 6-8.-6.5 0 70 9 4 64-0400 64-0500 8-4 4.00-7.00 6 55 84 5 64-0500 64-0600 8-4 4.00-7.00 6 60 88 6 64-0600 64-0800 8-4 4.00-7.00 6 60 88 8 64-0800 64-000 0-4 4.6-8.00 60 00 47 0 64-000 64-00 0-4 4.6-8.00 60 0 60 64-00 64-600 0-4 4.6-8.00 60 0 60 6 64-600 64-600 8-4 6.00-8.00 96 800 895 0 64-000 64-000 8-4 6.00-8.00 96 845 955 5 6-500 6-500 8-4 6.00-8.00 0 045 00 Note: Wheels with convex treads are standard on all capacities /4-0. 0, 5, 0 and 40 ton trolleys can be furnished in tandem construction - Dimensions for 0 thru 50 ton upon request. Dimensions shown are for minimum beam size and will vary proportionately for larger beams. apacity D E G H I J K L M N O P tons in in in in in in in in in in in in in in in in /4 -/ 6-7/8 4-7/8 7/8 -/4 -/4 6-7/8 4-7/8 /4 4-/8 / -/ 6-7/8 4-7/8 7/8 -/4 -/4 6-7/8 4-7/8 /4 4-/8 -/4 6-/4 -/4 5-/8 -/4 6-/8 - -/8 5 -/4 -/4 /4 -/4 4-/4 -/ -/4 6-/4 -/4 5-/8 -/4 6-/8 - -/8 5 -/4 -/4 /8 -/4 4-/4 5-5/8 7-5/8-5/8 6-/4 -/8 -/8-5/8 6-/8 - -/8 6 4-/ -/ /8 -/8 5-/4 5-5/8 7-5//8-5/8 6-7/8 -/8 -/4 4 6-/8 - -/8 6 4-/ -/ / -/8 5-/4 4 8-/4 8-/ -/4 8-/8 -/4 -/4 4-/4 8-/8 /8 -/8 8 6-/8 5/8-5/8 6-/8 5 8-/4 8-/ -/4 8-5/8 -/4 5-/ 8-/8 /8 -/8 8 6-/8 5/8-5/8 6-/8 6 8-/4 8-/ -/4 8-5/8 -/4 5-/ 8-/8 /8 -/8 8 6-/8 5/8-5/8 6-/8 8-5/8 0-5/8-7/8 0-5/8 -/8 -/ 6-/ 9 /8 -/6 0 8-/4 -/ /4 -/4 6-7/8 0-5/8 0-5/8-7/8 -/8 -/8 4-/ 8 9 /8 -/6 0 8-/4 -/ -/4 6-7/8-5/8 0-5/8-7/8 -/8 -/8 4-/ 8 9 /8 -/6 0 8-/4 -/ -/4 6-7/8 6 8 4-/4 -/4-7/6 4 9 0-/6 /4 -/4 -/6 9-/4 -/4 -/4 4-5/8 7-5/8 0 8 4-/4 6-/4-7/6 4-/ 0 0-/6 /4 -/4 -/6 9-/4 -/4 -/4 4-5/8 7-5/8 5 8-/4 4 5-7/8 6-/4 -/8 4 0 4-/ 5/6 -/ -/4 -/4 -/4 7 8-/4 Note: or wide flange beam adaptation, patented track or for beams larger than standard consult factory or geared trolley, weight is shown less chain. 8ft standard zinc plated hand chain drop on geared trolley. Specify curve on order. 5

IRST USED ON GENERL TOLERNES DIMENSIONS RE IN INHES 0" TO 60" OVER 60".XX ±.00 ±.05.XXX ±.005 ±.00 RTION ± / ± /6 NGLE ±.5 ±.5 N0. HNGE DTE //08 ITL. S. D. DR. K. P. SHEET MTERIL ND WEIGHT O MTERIL SOURE SHEETS Global King Electric Motor Driven Trolleys TM Steel frame side plates extend beyond the wheels for end stop contacts. Side plates have tapped holes for collector bracket attachment. Optional drop stops and bumpers. Wheels are forged heat-treated steel with contour tread for use on merican Standard I-beam or wide flange beams. Traverse motor is 0-minute rated, totally enclosed nonventilated with class insulation with thermal switches as standard to protect the motor from over-heating. Traverse gearing is housed in a heavy duty right angle drive reducer with output pinion meshing with machine cut wheel gears. Trolley controls are housed in a NEM enclosed panel mounted on the trolley side for easy access. The controls include a reversing contractor, terminal strip and NEM 4X pendant station with hoist and trolley push-button controls as standard. /4- & ton V U V U 8 /4 WD W G Y Z PRT NUMER QUN. ITEM DESRIPTION N V G PIN DI TRED LINE G W /6 V U V WD TRED LINE 8 /4 Z Y U V G DI. N Specifications & Dimensions ton Motor Driven Trolley apacity Model # Standard Width djustment Optional lange Extended djustment PROJETNO st Extension nd Extension Trolley Speed Optional Standard Speeds Special Speed Motor tons in in in PM PM PM HP /4 to MDT0 to 5 5-/8 to 7-/4 7-/ to 9-/8 75 50 & 00 5, 50 /4 MDT0-5/8 to 6 6-/4 to 8-5/8 8-7/8 to -/4 60 40 & 80 0, 0 /4 MDT0 4 to 6-/4 6-/8 to 8-5/8 8-/4 to 50 75 & 00 5, 5 /4 dded and Y dimensions fa LERNE DIGRM MDT0 MOTOR DRIVER TROLLEY TON 6"=" YL E LI T-T E H 9/0/07 P.KRY apacity Model # Max G Max U V Y Max G Dia N U V W Max Z WD tons in in in in in in in in in in in in in in in in /4 to MDT0 6-7/8 -/ -7/8 /4-9/6 -/8 -/6 5/8 -/8 7-/4 -/ 4-7/8 4 MDT0 6-7/8 -/ 4-/8-5/6-5/6 -/6-7/6 5 9-/8 -/4 4-7/8 4 5 MDT0 -/6 7-/6 -/ 4-/ -/8 - - -/8 -/4 6 9-/8 -/4 -/ 4-7/8 4 5 lways specify voltage when ordering. Voltages available: 5/0--60, 08-0/460--60, 575--60 5/0--60 is not available on trolleys for two speed hoists or two speed trolley. Two speed trolleys have a : speed ratio. Standard pendant drop from trolley is 7 feet. Longer cables are available. Trolleys are equipped with -foot length power supply cable. Longer lengths are available. Min Radius 6

ir Motor Driven Trolleys Steel frame side plates extend beyond the wheels for end stop contacts. Side plates have tapped holes for collector bracket attachment. Wheels are forged heat-treated steel with contoured tread for use on merican Standard tapered or wide flange beams. Wheel bearings are sealed lifetime lubricated precision ball bearings Traverse gear reducer is rugged right angle drive reducer with output pinion meshing with machine cut wheel gears. The drive units are shipped with high-grade synthesized hydrocarbon oil for excellent gear protection and wide temperature range capacities. Eight vane air motor provides high torque, smooth starting and excellent control. Pendant throttle control provides precise, controlled spotting and efficient load handling. Spark resistant models are available for those areas where protection is needed in a hazardous environment. They contain all the same features except for the introduction of a spark resistant bronze wheel. YL /6 /6 /6 0 9/6 Min Min /4 Min KL R D W E 4 DI WHEEL 5/8 DI /8 4 /8 TREDLINE 8 5/8 4 7/8 7/8 /6 WD Dia. G Dia. P TRED LINE H J Specifications & Dimensions apacity Model # lange Width djustment Traverse Speed Max D Max E Min Dia G H Max J Max L tons in PM in in in in in in in in in in Standard Trolleys /4, /, 9706 to 5 50 7-5/8 -/8-9/6 4-/ -7/6 5/8 8-7/8 5-/8 -/6 9707-5/8 to 6 60 9-/8 5 -/6 5-5/8 9-/ 5-/6-5/8 9708 4 to 6-/4 60 9-/8 -/4 6 -/ 5-7/8 -/4 5-5/8 -/ Spark Resistant Trolleys /8, /, /4 970 to 5 50 7-5/8 -/8-9/6 4-/ -7/6 5/8 8-7/8 5-/8 -/6 97-5/8 to 6 60 9-/8 5 -/6 5-5/8 9-/ 5-/6-5/8 97 4 to 6-/4 60 9-/8 -/4 6 -/ 5-7/8 -/4 5-5/8 -/ lange djustment apacity Model # Min eam Net P R Min W WD Min Radius Depth Standard st Extension nd Extension Weight in in in in in in in in in lbs Standard Trolleys /4, /, 9706 4-/8 7-/8 / 4 '-0" 6 to 5 5-/8 to 7-/4 7-/ to 9-/8 95 9707 4-/8 6-5/8 -/6 4 5 7-5/8 to 6 6-/4 to 8-5/8 8-7/8 to -/4 05 9708 4-/8 6-5/8 -/8 4 5 8 4 to 6-/4 6-/8 to 8-5/8 8-/4 to 50 Spark Resistant Trolleys /8, /, /4 970 4-/8 7-/8 / 4-0 6 to 5 5-/8 to 7-/4 7-/ to 9-/8 95 97 4-/8 6-5/8 -/6 4 5 7-5/8 to 6 6-/4 to 8-5/8 8-7/8 to -/4 05 97 4-/8 6-5/8 -/8 4 5 8 4 to 6-/4 6-/8 to 8-5/8 8-/4 to 50 Equipped with 7 foot pendant control hose. lways specify the hoist catalog number that will operate with the trolley. Models for patented track with narrow flat tread steel wheels are available. Models with extended beam flange adjustment are available. 7

olumbus McKinnon rand To void Injury: Do no exceed working load limit, load rating, or capacity. Do not use to lift people or loads over people. Read and follow all instructions. or additional information contact your Yale representative or Yale headquarters direct. 44 West roadway ve. P.O. ox 769 Muskegon, Michigan 4944-0769 PHONE (800) 74-969 X (800) 74-970 www.yalehoists.net Printed in U.S.. / OPYRIGHT 008, LIT-TEH INTERNTIONL, DIVISION O OLUMUS MKINNON ORPORTION / ULLETIN NO. Y/L-0-0608