The Garador Range Price List

The Garador Range Price List 3rd October 2016 Garage Doors, Front Entrance Doors and Automatic Operators

GARADOR General Information All prices are quoted in Sterling, ex-works and exclusive of VAT. Please ensure that you order the correct size door to fit your opening as we are unable to accept the return of incorrectly ordered goods. Please contact Garador on 01935 443722 if you need assistance in calculating the correct size. A comprehensive range of the less common accessories and all spare parts are available either online or ask for a current spares price list if required. Since the company s policy is one of continuous improvement of its products, we reserve the right to make any alterations in design, manufacture or price. All business is governed by the Company s Standard Conditions and this document does not form any part of any contract with the company and statements contained in it should not be construed as representations or warranties. For more information please visit www.garador.co.uk 2

GARADOR Contents Steel Panel Doors 4 Guardian Range 16 Design Range 18 PVC Panel Doors 20 GRP Premier Panel Doors 22 Timber Panel Doors 28 Steel and Timber Garage Side Doors 38 Steel and Timber Side-hinged Doors 40 Steel Panel Doors - Specifications 46 Steel Sectional Garage Doors 50 Automation and Accessories 64 GaraRoll Roller Doors 70 GaraRoll Lite Roller Doors 74 FrontGuard Entrance Doors 78 User Information / Care 86 Warranty 88 Extracts from DHF consumer advice 90 3

GARADOR Steel Panel Doors Steel Panel Doors Surface High quality powder or foil coated finish. Please note: panel doors are produced with appearance in mind. This may result in some small gaps which could allow water ingress especially in exposed locations. Colours Traffic White (RAL 9016) and Terra Brown (RAL 8028) as standard, other optional colours of Moss Green (RAL 6005), Ruby Red (RAL 3003), Signal Blue (RAL 5005), Jet Black (RAL 9005), Steel Blue (RAL 5011), Light Ivory (RAL 1015), Pigeon Blue (RAL 5014) Fir Green (RAL 6009), Anthracite Grey (RAL 7016), Titan Metallic (CH 703) 1, Pastel Green (RAL 6019), Rosewood (solid) and Golden Oak (solid) are available on an approximate 4 week lead-time. Stone Grey (RAL 7030), Light grey (RAL 7035), Clay Brown (RAL 8003) and Window Grey (RAL 7040) are available on an approximate 6 week lead-time. 1 Only available on Design Range doors. Handle Black handle as standard, optional handles are available. Doors can be supplied undrilled and without handle and locking mechanism for use with electric operator (not available on Wentwood or Sherwood doors). This option makes the door purpose made and will therefore increase lead-time, please specify clearly on order. Terminology : This is the actual door panel size plus the fitting tolerances. The nominal door size should be used for internal dimensions of a timber frame. Size Code: This has traditionally been used to order doors. This may not be the actual door size. Packaging White, brown and timber effect doors are supplied unwrapped as standard with optional poly-wrapping available. Coloured doors are supplied wrapped and - also - include a touch up stick as standard. Side-hinged doors are provided wrapped as standard. Stock availability Prices in bold show stock doors on a standard lead-time (approx 1 week) in white unless specified. All other prices relate to non-stock doors on an approximately two to four week lead-time. Brown (RAL 8028 only) finished doors available ex-stock in 7066 and 7070 in Horizon, Carlton, Georgian, Beaumont and Cathedral. Some other doors are available in Jet Black (RAL 9005), please see individual pages. All other sizes in brown are non stock doors. Canopy gearing (shown as C) Canopy gear is available for all single doors providing a reliable and afforable gearing solution, with no tracks running back into the garage. Retractable gearing (shown as R) Retractable gear is available for all single and double doors providing a reliable and affordable gearing solution, with tracks running back into the garage. 4

GARADOR Steel Panel Doors Standard Sizes Single door Size Code Horizon Carlton Ascot Windsor C R C R C R C R 1984 x 1830 531 574 603 646 - - - - 6660 1984 x 1905 531 574 603 646 - - - - 6663 1984 x 1931 531 574 603 646 - - - - 6664 1984 x 1981 503 546 573 616 - - - - 6666 1984 x 2136 503 546 573 616 - - - - 6670 2084 x 1931 513 556 572 615 - - - - 61064 2084 x 1981 525 568 572 615 - - - - 61066 2084 x 2136 544 587 584 627 - - - - 61070 2134 x 1830 545 588 618 661 - - - - 7060 2134 x 1905 545 588 618 661 - - - - 7063 2134 x 1931 519 562 575 618 - - - - 7064 2134 x 1981 481 524 556 599 586 629 686 729 7066 2134 x 2136 526 569 579 622 655 698 707 750 7070 2134 x 2286-672 - 719 - - - - 7076 2170 x 1931 519 562 575 618 - - - - 7164 2170 x 1981 481 524 556 599 586 629 686 729 7166 2170 x 2136 526 569 579 622 655 698 707 750 7170 2170 x 2286-744 - 782 - - - - 7176 2224 x 1931 565 608 602 645 - - - - 7364 2224 x 1981 568 611 605 648 - - - - 7366 2224 x 2136 576 619 612 655 - - - - 7370 2259 x 1931 561 604 608 651 - - - - 7564 2259 x 1981 565 608 608 651 673 716 734 777 7566 2259 x 2136 643 686 685 728 763 806 795 838 7570 2259 x 2286-800 - 782 - - - - 7576 2284 x 1931 565 608 625 668 - - - - 7664 2284 x 1981 565 608 625 668 673 716 734 777 7666 2284 x 2136 644 687 685 728 753 796 795 838 7670 2284 x 2286-804 - 782 - - - - 7676 2439 x 1931 653 696 740 783 - - - - 8064 2439 x 1981 653 696 740 783 747 790 851 894 8066 2439 x 2136 666 709 764 807 773 816 876 919 8070 2439 x 2286-783 - 852 - - - - 8076 2590 x 1981-753 - 849 - - - - 8666 2590 x 2136-780 - 884 - - - - 8670 2590 x 2286-861 - 961 - - - - 8676 2744 x 1981-900 - 912 - - - - 9066 2744 x 2136-947 - 961 - - - - 9070 2744 x 2286-983 - 998 - - - - 9076 3049 x 1981-1063 - 1026 - - - - 1066 3049 x 2136-1075 - 1037 - - - - 1070 Prices in bold show stock doors in Traffic White on a one-week lead-time. All other prices are non-stock standard doors on a two to four week lead-time. Stock doors also available in Jet Black (based on RAL 9005). For further options please see page 15. 5

GARADOR Steel Panel Doors Standard Sizes Single door Size Code Sutton Chevron Salisbury 1 C R C R C R 1984 x 1830 - - - - - - 6660 1984 x 1905 - - - - - - 6663 1984 x 1931 - - - - - - 6664 1984 x 1981 - - 594 637 - - 6666 1984 x 2136 - - 594 637 - - 6670 2084 x 1931 - - - - - - 61064 2084 x 1981 - - - - - - 61066 2084 x 2136 - - - - - - 61070 2134 x 1830 - - - - - - 7060 2134 x 1905 - - - - - - 7063 2134 x 1931 629 672 629 672 958 1001 7064 2134 x 1981 594 637 594 637 958 1001 7066 2134 x 2136 634 677 634 677 969 1012 7070 2134 x 2286 - - - - - - 7076 2170 x 1931 - - - - - - 7164 2170 x 1981 - - - - - - 7166 2170 x 2136 - - - - - - 7170 2170 x 2286 - - - - - - 7176 2224 x 1931 - - - - - - 7364 2224 x 1981 - - - - - - 7366 2224 x 2136 - - - - - - 7370 2259 x 1931 690 733 690 733 996 1039 7564 2259 x 1981 690 733 690 733 996 1039 7566 2259 x 2136 759 802 759 802 1006 1049 7570 2259 x 2286 - - - - - - 7576 2284 x 1931 697 740 697 740 996 1039 7664 2284 x 1981 662 705 662 705 996 1039 7666 2284 x 2136 731 774 731 774 1006 1049 7670 2284 x 2286 - - - - - - 7676 2439 x 1931 768 811 - - 1057 1100 8064 2439 x 1981 768 811 - - 1057 1100 8066 2439 x 2136 782 825 - - 1067 1110 8070 2439 x 2286 - - - - - - 8076 2590 x 1981 - - - - - - 8666 2590 x 2136 - - - - - - 8670 2590 x 2286 - - - - - - 8676 2744 x 1981 - - - - - - 9066 2744 x 2136 - - - - - - 9070 2744 x 2286 - - - - - - 9076 3049 x 1981 - - - - - - 1066 3049 x 2136 - - - - - - 1070 1 Salisbury windows ( ) come as white or brown as standard, colour match windows are available to order as an option, see page 15. Prices in bold show stock doors on a one-week lead-time. All other prices are non-stock standard doors on a two to four week lead-time. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. Stock doors also available in Jet Black (based on RAL 9005). For further options please see page 15. 6

GARADOR Steel Panel Doors Standard Sizes Single door Size Code Georgian Beaumont Cathedral Beaumont with Windows 1 C R C R C R C R 1984 x 1830 - - - - - - - - 6660 1984 x 1905 - - - - - - - - 6663 1984 x 1931 737 780 737 780 737 780 1004 1047 6664 1984 x 1981 698 741 698 741 698 741 1008 1051 6666 1984 x 2136 708 751 708 751 708 751 977 1020 6670 2084 x 1931 705 748 705 748 705 748 973 1016 61064 2084 x 1981 706 749 706 749 706 749 975 1018 61066 2084 x 2136 758 801 758 801 758 801 1025 1068 61070 2134 x 1830 - - - - - - - - 7060 2134 x 1905 - - - - - - - - 7063 2134 x 1931 706 749 706 749 706 749 975 1018 7064 2134 x 1981 706 749 706 749 706 749 975 1018 7066 2134 x 2136 749 792 749 792 749 792 1015 1058 7070 2134 x 2286-891 - 891-891 - 1158 7076 2170 x 1931 706 749 706 749 706 749 975 1018 7164 2170 x 1981 706 749 706 749 706 749 975 1018 7166 2170 x 2136 749 792 749 792 749 792 1015 1058 7170 2170 x 2286-965 - 965-965 - 1232 7176 2224 x 1931 786 829 786 829 786 829 1054 1097 7364 2224 x 1981 791 834 791 834 791 834 1058 1101 7366 2224 x 2136 796 839 796 839 796 839 1063 1106 7370 2259 x 1931 786 829 786 829 786 829 1054 1097 7564 2259 x 1981 786 829 786 829 786 829 1054 1097 7566 2259 x 2136 906 949 906 949 906 949 1174 1217 7570 2259 x 2286-1100 - 1100-1100 - 1366 7576 2284 x 1931 786 829 786 829 786 829 1054 1097 7664 2284 x 1981 786 829 786 829 786 829 1054 1097 7666 2284 x 2136 906 949 906 949 906 949 1174 1217 7670 2284 x 2286-1100 - 1100-1100 - 1366 7676 2439 x 1931 932 975 932 975 932 975 1199 1242 8064 2439 x 1981 932 975 932 975 932 975 1199 1242 8066 2439 x 2136 970 1013 970 1013 970 1013 1238 1281 8070 2439 x 2286-1079 - 1079-1079 - 1389 8076 2590 x 1981-993 - 993-993 - 1303 8666 2590 x 2136-1004 - 1004-1004 - 1315 8670 2590 x 2286-1113 - 1113-1113 - 1423 8676 2744 x 1981-1009 - 1009-1009 - 1320 9066 2744 x 2136-1021 - 1021-1021 - 1330 9070 2744 x 2286-1130 - 1130-1130 - 1440 9076 3049 x 1981-1048 - 1048-1048 - 1358 1066 3049 x 2136-1069 - 1069-1069 - 1380 1070 1 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if clear or crystal panes, see page 15. Prices in bold show stock doors on a one-week lead-time. All other prices are non-stock standard doors on a two to four week lead-time. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 15. 7

GARADOR Steel Panel Doors Standard Sizes Single door Size Code Wentwood Sherwood Georgian Timber Effect Beaumont Timber Effect Cathedral Timber Effect C R C R C R C R C R 1984 x 1830 - - - - - - - - - - 6660 1984 x 1905 - - - - - - - - - - 6663 1984 x 1931 - - - - 847 890 847 890 847 890 6664 1984 x 1981 - - - - 847 890 847 890 847 890 6666 1984 x 2136 - - - - 887 930 887 930 887 930 6670 2084 x 1931 - - - - 847 890 847 890 847 890 61064 2084 x 1981 - - - - 847 890 847 890 847 890 61066 2084 x 2136 - - - - 887 930 887 930 887 930 61070 2134 x 1830 - - - - - - - - - - 7060 2134 x 1905 - - - - - - - - - - 7063 2134 x 1931 - - - - 847 890 847 890 847 890 7064 2134 x 1981 619 662 718 761 847 890 847 890 847 890 7066 2134 x 2136 688 731 740 783 887 930 887 930 887 930 7070 2134 x 2286 - - - - - 984-984 - 984 7076 2170 x 1931 - - - - 847 890 847 890 847 890 7164 2170 x 1981 - - - - 847 890 847 890 847 890 7166 2170 x 2136 - - - - 887 930 887 930 887 930 7170 2170 x 2286 - - - - - 984-984 - 984 7176 2224 x 1931 - - - - 847 890 847 890 847 890 7364 2224 x 1981 - - - - 847 890 847 890 847 890 7366 2224 x 2136 - - - - 887 930 887 930 887 930 7370 2259 x 1931 - - - - 941 984 941 984 941 984 7564 2259 x 1981 704 747 765 808 941 984 941 984 941 984 7566 2259 x 2136 785 828 826 869 941 984 941 984 941 984 7570 2259 x 2286 - - - - - 1144-1144 - 1144 7576 2284 x 1931 - - - - 941 984 941 984 941 984 7664 2284 x 1981 704 747 765 808 941 984 941 984 941 984 7666 2284 x 2136 785 828 826 869 1091 1134 1091 1134 1091 1134 7670 2284 x 2286 - - - - - 1186-1186 - 1186 7676 2439 x 1931 - - - - 1109 1152 1109 1152 1109 1152 8064 2439 x 1981 779 822 882 925 1109 1152 1109 1152 1109 1152 8066 2439 x 2136 807 850 910 953 1148 1191 1148 1191 1148 1191 8070 2439 x 2286 - - - - - 1243-1243 - 1243 8076 2590 x 1981 - - - - - 1163-1163 - 1163 8666 2590 x 2136 - - - - - 1173-1173 - 1173 8670 2590 x 2286 - - - - - 1227-1227 - 1227 8676 2744 x 1981 - - - - - 1176-1176 - 1176 9066 2744 x 2136 - - - - - 1186-1186 - 1186 9070 2744 x 2286 - - - - - 1240-1240 - 1240 9076 3049 x 1981 - - - - - 1208-1208 - 1208 1066 3049 x 2136 - - - - - 1220-1220 - 1220 1070 Prices in bold show stock doors on a one-week lead-time. All other prices are non-stock standard doors on a three to four week lead-time. For further options please see page 15. 8

GARADOR Steel Panel Doors Purpose-made Sizes Single door Horizon Carlton Georgian Beaumont Cathedral C R C R C R C R C R 1830-1930 x 1830-1930 701 744 728 771 - - - - - - 1830-1930 x 1931-1981 727 770 755 798 - - - - - - 1830-1930 x 1982-2136 783 826 799 842 - - - - - - 1830-1930 x 2137-2286 - 881-911 - - - - - - 1830-1930 x 2287-2439 - 945-970 - - - - - - 1931-1984 x 1830-1930 705 748 737 780 - - - - - - 1931-1984 x 1931-1981 733 776 761 804 - - - - - - 1931-1984 x 1982-2136 777 820 804 847 - - - - - - 1931-1984 x 2137-2286 - 881-911 - - - - - - 1931-1984 x 2287-2439 - 945-970 - - - - - - 1985-2134 x 1830-1930 733 776 760 803 - - - - - - 1985-2134 x 1931-1981 777 820 804 847 1107 1150 1107 1150 1107 1150 1985-2134 x 1982-2136 839 882 856 899 1175 1218 1175 1218 1175 1218 1985-2134 x 2137-2286 - 945-970 - 1291-1291 - 1291 1985-2134 x 2287-2439 - 1004-1023 - 1245-1245 - 1245 2135-2284 x 1830-1930 777 820 794 837 - - - - - - 2135-2284 x 1931-1981 839 882 856 899 1186 1229 1186 1229 1186 1229 2135-2284 x 1982-2136 891 934 920 963 1186 1229 1186 1229 1186 1229 2135-2284 x 2137-2286 - 1004-1023 - 1281-1281 - 1281 2135-2284 x 2287-2439 - 1068-1094 - 1457-1457 - 1457 2285-2499 1 x 1830-1930 839 882 866 909 - - - - - - 2285-2499 1 x 1931-1981 891 934 920 963 1258 1301 1258 1301 1258 1301 2285-2499 1 x 1982-2136 899 942 970 1013 1280 1323 1280 1323 1280 1323 2285-2499 x 2137-2286 - 1026-1048 - 1361-1361 - 1361 2285-2499 x 2287-2439 - 1069-1080 - 1416-1416 - 1416 2500-2590 x 1830-1930 - 961-979 - - - - - - 2500-2590 x 1931-1981 - 1004-1023 - 1350-1350 - 1350 2500-2590 x 1982-2136 - 1069-1069 - 1372-1372 - 1372 2500-2590 x 2137-2286 - 1080-1080 - 1403-1403 - 1403 2500-2590 x 2287-2439 - 1145-1145 - 1448-1448 - 1448 2591-2722 x 1830-1930 - 1021-1021 - - - - - - 2591-2722 x 1931-1981 - 1063-1063 - 1355-1355 - 1355 2591-2722 x 1982-2136 - 1138-1138 - 1421-1421 - 1421 2591-2722 x 2137-2286 - 1208-1208 - 1463-1463 - 1463 2591-2722 x 2287-2439 - 1289-1289 - - - - - - 2723-3049 x 1830-1930 - - - 1243 - - - - - - 2723-3049 x 1931-1981 - - - 1288-1448 - 1448-1448 2723-3049 x 1982-2136 - - - 1420-1503 - 1503-1503 1 Canopy gear only available up to 2439 wide. Orders for purpose made sizes will only be accepted as nominal door size for unframed version and overall frame size when ordering a framed version. Orders for purpose made framed doors will not be accepted as nominal door size. For further options please see page 15. 9

GARADOR Steel Panel Doors Purpose-made Sizes Single door Beaumont with Windows 2 Georgian Timber Effect Beaumont Timber Effect Cathedral Timber Effect C R C R C R C R 1830-1930 x 1830-1930 - - - - - - - - 1830-1930 x 1931-1981 - - - - - - - - 1830-1930 x 1982-2136 - - - - - - - - 1830-1930 x 2137-2286 - - - - - - - - 1830-1930 x 2287-2439 - - - - - - - - 1931-1984 x 1830-1930 - - - - - - - - 1931-1984 x 1931-1981 - - - - - - - - 1931-1984 x 1982-2136 - - - - - - - - 1931-1984 x 2137-2286 - - - - - - - - 1931-1984 x 2287-2439 - - - - - - - - 1985-2134 x 1830-1930 - - - - - - - - 1985-2134 x 1931-1981 1374 1417 1256 1299 1256 1299 1256 1299 1985-2134 x 1982-2136 1443 1486 1325 1368 1325 1368 1325 1368 1985-2134 x 2137-2286 - 1559-1441 - 1441-1441 1985-2134 x 2287-2439 - 1513-1513 - 1513-1513 2135-2284 x 1830-1930 - - - - - - - - 2135-2284 x 1931-1981 1454 1497 1325 1368 1325 1368 1325 1368 2135-2284 x 1982-2136 1454 1497 1325 1368 1325 1368 1325 1368 2135-2284 x 2137-2286 - 1548-1686 - 1686-1686 2135-2284 x 2287-2439 - 1725-1596 - 1596-1596 2285-2499 1 x 1830-1930 - - - - - - - - 2285-2499 1 x 1931-1981 1526 1569 1387 1430 1387 1430 1387 1430 2285-2499 1 x 1982-2136 1547 1590 1408 1451 1408 1451 1408 1451 2285-2499 x 2137-2286 - 1629-1490 - 1490-1490 2285-2499 x 2287-2439 - 1684-1544 - 1544-1544 2500-2590 x 1830-1930 - - - - - - - - 2500-2590 x 1931-1981 - 1617-1467 - 1467-1467 2500-2590 x 1982-2136 - 1639-1490 - 1490-1490 2500-2590 x 2137-2286 - 1671-1521 - 1521-1521 2500-2590 x 2287-2439 - 1715-1566 - 1566-1566 2591-2722 x 1830-1930 - - - - - - - - 2591-2722 x 1931-1981 - 1623-1467 - 1467-1467 2591-2722 x 1982-2136 - 1689-1533 - 1533-1533 2591-2722 x 2137-2286 - 1731-1576 - 1576-1576 2591-2722 x 2287-2439 - - - - - - - - 2723-3049 x 1830-1930 - - - - - - - - 2723-3049 x 1931-1981 - 1715-1555 - 1555-1555 2723-3049 x 1982-2136 - 1769-1610 - 1610-1610 1 Canopy gear only available up to 2439 wide. 2 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if clear or crystal panes. Orders for purpose made sizes will only be accepted as nominal door size for unframed version and overall frame size when ordering a framed version. Orders for purpose made framed doors will not be accepted as nominal door size. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 15. 10

GARADOR Steel Panel Doors Standard Sizes Double door Horizon Carlton Chevron Salisbury Size Code R R R R 3049 x 2286 1376 1376 - - 1076 3354 x 1981 1288 1288 - - 1166 3354 x 2136 1298 1298 - - 1170 3354 x 2286 1331 1441 - - 1176 3659 x 1981 1353 1353 - - 1266 3659 x 2136 1363 1363 - - 1270 3659 x 2286 1459 1459 - - 1276 3964 x 1981 1472 1472 - - 1366 3964 x 2136 1483 1483 - - 1370 3964 x 2286 1626 1626 - - 1376 4269 x 1981 1418 1418 1862 1964 1466 4269 x 2136 1418 1418 1862 1964 1470 4574 x 1981 1526 1526 - - 1566 4574 x 2136 1550 1550 - - 1570 4879 x 1981 1615 1615 - - 1666 4879 x 2136 1636 1636 - - 1670 Double door Ascot Windsor Wentwood Sherwood Size Code R R R R 3049 x 2286 - - - - 1076 3354 x 1981 - - - - 1166 3354 x 2136 - - - - 1170 3354 x 2286 - - - - 1176 3659 x 1981 - - - - 1266 3659 x 2136 - - - - 1270 3659 x 2286 - - - - 1276 3964 x 1981 - - - - 1366 3964 x 2136 - - - - 1370 3964 x 2286 - - - - 1376 4269 x 1981 1498 1498 1789 1832 1466 4269 x 2136 1498 1498 1789 1832 1470 4574 x 1981 - - - - 1566 4574 x 2136 - - - - 1570 4879 x 1981 - - - - 1666 4879 x 2136 - - - - 1670 Prices in bold show stock doors on a one-week lead-time. All other prices are non-stock white standard doors on a two to three week lead-time. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 15. 11

GARADOR Steel Panel Doors Standard Sizes Double door Georgian Beaumont Cathedral Beaumont with Windows 1 R R R R 3049 x 2286 1376 1376 1376 1776 1076 3354 x 1981 1353 1353 1353 1755 1166 3354 x 2136 1353 1353 1353 1755 1170 3354 x 2286 1441 1461 1461 1863 1176 3659 x 1981 1441 1441 1441 1841 1266 3659 x 2136 1441 1441 1441 1841 1270 3659 x 2286 1506 1506 1506 1907 1276 3964 x 1981 1484 1484 1484 1885 1366 3964 x 2136 1484 1484 1484 1885 1370 3964 x 2286 1506 1506 1506 1885 1376 4269 x 1981 1526 1526 1526 2061 1466 4269 x 2136 1526 1526 1526 2061 1470 4574 x 1981 1658 1658 1658 2059 1566 4574 x 2136 1658 1658 1658 2059 1570 4879 x 1981 1746 1746 1746 2148 1666 4879 x 2136 1746 1746 1746 2148 1670 1 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if clear or crystal panes. Size Code Double door Georgian Timber Effect Beaumont Timber Effect Cathedral Timber Effect Size Code R R R 3049 x 2286 1498 1498 1498 1076 3354 x 1981 1475 1475 1475 1166 3354 x 2136 1475 1475 1475 1170 3354 x 2286 1582 1582 1582 1176 3659 x 1981 1562 1562 1562 1266 3659 x 2136 1562 1562 1562 1270 3659 x 2286 1646 1646 1646 1276 3964 x 1981 1646 1646 1646 1366 3964 x 2136 1646 1646 1646 1370 3964 x 2286 1668 1668 1668 1376 4269 x 1981 1657 1657 1657 1466 4269 x 2136 1657 1657 1657 1470 4574 x 1981 1796 1796 1796 1566 4574 x 2136 1796 1796 1796 1570 4879 x 1981 1924 1924 1924 1666 4879 x 2136 1924 1924 1924 1670 Prices in bold show stock doors on a one-week lead-time. All other prices are non-stock standard doors on a two to three week lead-time, timber effect finishes are on a four to six week lead time. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 15. 12

GARADOR Steel Panel Doors Purpose-made Sizes Double door Carlton Horizon R R 2745-3049 x 2137-2286 1593-2745-3049 x 2287-2439 - - 3050-3354 x 1886-1981 1506 1526 3050-3354 x 1982-2136 1516 1538 3050-3354 x 2137-2286 1658 1680 3050-3354 x 2287-2439 - - 3355-3659 x 1886-1981 1550 1571 3355-3659 x 1982-2136 1581 1603 3355-3659 x 2137-2286 1658 1680 3355-3659 x 2287-2439 - - 3660-3967 x 1886-1981 1691 1713 3660-3967 x 1982-2136 1724 1746 3660-3967 x 2137-2286 1844 1865 3660-3967 x 2287-2439 - - 3968-4269 x 1886-1981 1636 1658 3968-4269 x 1982-2136 1658 1680 3968-4269 x 2137-2286 - - 3968-4269 x 2287-2439 - - 4270-5000 x 1886-1981 1812 1832 4270-5000 x 1982-2136 1854 1877 Double door Georgian Beaumont Cathedral Beaumont with Windows 1 R R R R 2745-3049 x 2137-2286 1593 1593 1593 1868 2745-3049 x 2287-2439 - - - - 3050-3354 x 1931-1981 1571 1571 1571 1973 3050-3354 x 1982-2136 1593 1593 1593 1994 3050-3354 x 2137-2286 1680 1680 1680 2083 3050-3354 x 2287-2439 - - - 2059 3355-3659 x 1931-1981 1658 1658 1658 2059 3355-3659 x 1982-2136 1702 1702 1702 2103 3355-3659 x 2137-2286 1724 1724 1724 2124 3355-3659 x 2287-2439 - - - - 3660-3967 x 1931-1981 1702 1702 1702 2235 3660-3967 x 1982-2136 1724 1724 1724 2258 3660-3967 x 2137-2286 1746 1746 1746 2280 3660-3967 x 2287-2439 - - - - 3968-4269 x 1931-1981 1746 1746 1746 2280 3968-4269 x 1982-2136 1746 1746 1746 2280 3968-4269 x 2137-2286 - - - - 3968-4269 x 2287-2439 - - - - 4270-5000 x 1931-1981 1964 1964 1964 2632 4270-5000 x 1982-2136 1964 1964 1964 2632 1 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if clear or crystal panes. Orders for purpose made sizes will only be accepted as nominal door size for unframed version and overall frame size when ordering a framed version. Orders for purpose made framed doors will not be accepted as nominal door size. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 15. 13

GARADOR Steel Panel Doors Purpose-made Sizes Double door Georgian Timber Effect Beaumont Timber Effect Cathedral Timber Effect R R R 2745-3049 x 2137-2286 1754 1754 1754 2745-3049 x 2287-2439 - - - 3050-3354 x 1886-1981 1731 1731 1731 3050-3354 x 1982-2136 1754 1754 1754 3050-3354 x 2137-2286 1840 1840 1840 3050-3354 x 2287-2439 - - - 3355-3659 x 1886-1981 1829 1829 1829 3355-3659 x 1982-2136 1874 1874 1874 3355-3659 x 2137-2286 1894 1894 1894 3355-3659 x 2287-2439 - - - 3660-3967 x 1886-1981 1884 1884 1884 3660-3967 x 1982-2136 1906 1906 1906 3660-3967 x 2137-2286 1926 1926 1926 3660-3967 x 2287-2439 - - - 3968-4269 x 1886-1981 1938 1938 1938 3968-4269 x 1982-2136 1938 1938 1938 3968-4269 x 2137-2286 - - - 3968-4269 x 2287-2439 - - - 4270-5000 x 1886-1981 2156 2156 2156 4270-5000 x 1982-2136 2156 2156 2156 Timber effect finishes are on a four to six week lead time. Orders for purpose made sizes will only be accepted as nominal door size for unframed version and overall frame size when ordering a framed version. Orders for purpose made framed doors will not be accepted as nominal door size. For further options please see page 15. 14

GARADOR Steel Panel Doors Options Options Single doors add Double doors add Factory pre-framed standard single doors 107 - Steel frame for standard double doors - 160 Factory pre-framed purpose-made single doors (framed retractable purpose made doors require a 4 week lead-time) 118 - Steel frame for purpose made double doors - 176 Additional Lock Kit, C-type/ R-type (fitted onto door) 48 - Retractable plus gear available on 1931, 1981 and 2136 mm high doors up to 2744 mm wide 31 - For powder-coated doors 1 : Brown (RAL 8028) 1 30 58 For powder-coated doors 1 : Moss Green (RAL 6005), Ruby Red (RAL 3003), Signal Blue (RAL 5005), Jet Black (RAL 9005), Steel Blue (RAL 5011), Light Ivory (RAL 1015), Pigeon Blue (RAL 5014), Fir Green (RAL 6009), Pastel Green (RAL 6019), Anthracite Grey (RAL 7016), Stone Grey (RAL 7030), Light Grey (RAL 7035), Clay Brown (RAL 8003), Window Grey (RAL 7040), Rosewood (Solid) and Golden Oak (Solid). Coloured window frames to match door colour Beaumont doors (price per window). Beaumont doors up to 3049 wide = 4 windows, between 3050 to 3964 = 6 windows, between 3965 to 4860 = 8 windows and over 4860 = 10 windows. 103 163 36 each 36 each Coloured window frames to match door colour Salisbury doors (price per door) 130 260 Black window panes for Salisbury doors (price per door) 27 54 Poly-wrapping (available on white and brown) 21 37 Diecast metal handles: brass effect, chrome effect, brushed steel and white 27 27 Bottom weatherseal, 2405 mm length (suitable for gaps up to 15 mm between the door and the floor level) Bottom weatherseal, 3000 mm length (suitable for gaps up to 15 mm between the door and the floor level) 31 31 35 35 1 Please state coloured windows required on order. Coloured Beaumont with windows and Salisbury doors are supplied with white or brown window frames as standard. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. 15

GARADOR Guardian Range Guardian Range New Secured By Design certified Up & Over doors These doors have been tested to the STS 202 Security Technical Specification and achieve Secured By Design accreditation. New lock body protection, anti-snap cylinder, high security bracing and improved lock security make these doors even more secure. Information Guardian Range doors come with a pre-fitted steel frame and cannot be fitted to a custom made timber frame. There is no mechanism to unlock Guardian range doors from the inside. Guardian Range doors are not suitable for automation. Window panes on Secured by Design Salisbury doors are black non-translucent. Stock availability All doors from the Guardian Range have an expected lead-time of four to six weeks. Single door - standard sizes Size Code Horizon Carlton Salisbury C R C R C R 1984 x 1830 897 940 971 1014 - - 6660 1984 x 1905 897 940 971 1014 - - 6663 1984 x 1931 897 940 971 1014 - - 6664 1984 x 1981 871 914 941 984 - - 6666 2084 x 1931 881 924 941 984 - - 61064 2084 x 1981 893 936 941 984 - - 61066 2084 x 2136 913 956 951 994 - - 61070 2134 x 1830 914 957 986 1029 - - 7060 2134 x 1905 914 957 986 1029 - - 7063 2134 x 1931 886 929 943 986 1327 1370 7064 2134 x 1981 826 869 924 967 1327 1370 7066 2134 x 2136 894 937 947 990 1337 1380 7070 2170 x 1931 936 979 983 1026 - - 7164 2170 x 1981 826 869 924 967 - - 7166 2170 x 2136 951 994 1012 1055 - - 7170 2224 x 1931 933 976 970 1013 - - 7364 2224 x 1981 936 979 973 1016 - - 7366 2224 x 2136 944 987 980 1023 - - 7370 2259 x 1931 962 1005 1002 1045 1363 1406 7564 2259 x 1981 933 976 977 1020 1363 1406 7566 2259 x 2136 1011 1054 1053 1096 1374 1417 7570 2284 x 1931 933 976 992 1035 1363 1406 7664 2284 x 1981 933 976 992 1035 1363 1406 7666 2284 x 2136 1012 1055 1053 1096 1374 1417 7670 2439 x 1931 - - - 1151-1467 8064 2439 x 1981 - - - 1151-1467 8066 2439 x 2136 - - - 1175-1478 8070 2590 x 1981 - - - 1216 - - 8666 2590 x 2136 - - - 1253 - - 8670 2744 x 1981 - - - 1278 - - 9066 2744 x 2136 - - - 1328 - - 9070 16

GARADOR Guardian Range Single door - purpose-made sizes Horizon Carlton C R C R 1985-2134 x 1830-1930 1100 1143 1128 1171 1985-2134 x 1931-1981 1144 1187 1172 1215 1985-2134 x 1982-2136 1208 1251 1223 1266 2135-2284 x 1830-1930 1144 1187 1161 1204 2135-2284 x 1931-1981 1208 1251 1208 1251 2135-2284 x 1982-2136 1259 1302 1287 1330 2285-2499 x 1830-1930 - 1251-1276 2285-2499 x 1931-1981 - 1302-1330 2285-2499 x 1982-2136 - 1299-1381 2500-2590 x 1830-1930 - 1347-1347 2500-2590 x 1931-1981 - 1390-1390 2500-2590 x 1982-2136 - 1438-1438 2591-2722 x 1830-1930 - 1388-1388 2591-2722 x 1931-1981 - 1432-1432 2591-2722 x 1982-2136 - 1506-1506 Orders for purpose made sizes will only be accepted as nominal door size for unframed version and overall frame size when ordering a framed version. Orders for purpose made framed doors will not be accepted as nominal door size. Options for single doors add For powder-coated doors: Brown (RAL 8028) 30 For powder coated doors: Moss Green (RAL 6005), Ruby Red (RAL 3003), Signal Blue (RAL 5005), Jet Black (RAL 9005), Steel Blue (RAL 5011), Light Ivory (RAL 1015), Pigeon Blue (RAL 5014), Fir Green (RAL 6009), Pastel Green (RAL 6019), Anthracite Grey (RAL 7016), Stone Grey (RAL 7030), Light Grey (RAL 7035), Clay Brown (RAL 8003), Window Grey (RAL 7040), Rosewood (Solid) and Golden Oak (Solid). 103 Coloured window frames on Salisbury to match door colour 130 Retractable plus gear (available up to 80 (2439) wide but in standard heights only - 64 (1931), 66 (1981) and 70 (2134)) 31 Secured by Design is an association focusing on the design of more secure homes and commercial properties. Secured by Design is owned by the ACPO (Association of Chief Police Officers) and awards the Secured by Design status to products that pass their extensive testing procedures. 17

GARADOR Design Range Design Range Surface and finish The Series 100 Design Range skins are built from four horizontal skins, whilst the Series 200 range is constructed from three vertical skins. Stainless steel elements on Garador design range doors are manufactured from high grade 2 mm thick steel with a brushed finish. The series 100 and 200 design range doors are also available without stainless steel elements. On Design Range doors a choice of any standard colour comes free of charge, please see page 19 for a choice of the 19 standard RAL colours available. The Titan Metallic colour is a structured metallic finish is only available on Design Range doors. Please note: panel doors are produced with appearance in mind. This may result in some small gaps which could allow water ingress especially in exposed locations. Handle and Packaging A new perfectly matched handle offers a quality feel everytime you open the door. Design Range doors come wrapped as standard. Terminology : This is the actual door panel size plus the fitting tolerances. The nominal door size should be used for internal dimensions of a timber frame. Size Code: This has traditionally been used to order doors. This may not be the actual door size. Single door Size Code 100 101 102 103 104 C R C R C R C R C R 2134 x 1981 818 861 982 1025 982 1025 982 1025 982 1025 7066 2134 x 2136 873 916 1036 1079 1036 1079 1036 1079 1036 1079 7070 2259 x 1981 900 943 1064 1107 1064 1107 1064 1107 1064 1107 7566 2259 x 2136 954 997 1119 1162 1119 1162 1119 1162 1119 1162 7570 2284 x 1981 917 960 1079 1122 1079 1122 1079 1122 1079 1122 7666 2284 x 2136 971 1014 1134 1177 1134 1177 1134 1177 1134 1177 7670 2439 x 1981 1036 1079 1199 1242 1199 1242 1199 1242 1199 1242 8066 2439 x 2136 1091 1134 1254 1297 1254 1297 1254 1297 1254 1297 8070 Single door Size Code 105 106 107 108 109 C R C R C R C R C R 2134 x 1981 982 1025 982 1025 982 1025 982 1025 982 1025 7066 2134 x 2136 1036 1079 1036 1079 1036 1079 1036 1079 1036 1079 7070 2259 x 1981 1064 1107 1064 1107 1064 1107 1064 1107 1064 1107 7566 2259 x 2136 1119 1162 1119 1162 1119 1162 1119 1162 1119 1162 7570 2284 x 1981 1079 1122 1079 1122 1079 1122 1079 1122 1079 1122 7666 2284 x 2136 1134 1177 1134 1177 1134 1177 1134 1177 1134 1177 7670 2439 x 1981 1199 1242 1199 1242 1199 1242 1199 1242 1199 1242 8066 2439 x 2136 1254 1297 1254 1297 1254 1297 1254 1297 1254 1297 8070 18

GARADOR Design Range Single door Size Code 200 201 202 203 204 C R C R C R C R C R 2134 x 1981 818 861 982 1025 982 1025 982 1025 982 1025 7066 2134 x 2136 873 916 1036 1079 1036 1079 1036 1079 1036 1079 7070 2259 x 1981 900 943 1064 1107 1064 1107 1064 1107 1064 1107 7566 2259 x 2136 954 997 1119 1162 1119 1162 1119 1162 1119 1162 7570 2284 x 1981 917 960 1079 1122 1079 1122 1079 1122 1079 1122 7666 2284 x 2136 971 1014 1134 1177 1134 1177 1134 1177 1134 1177 7670 2439 x 1981 1036 1079 1199 1242 1199 1242 1199 1242 1199 1242 8066 2439 x 2136 1091 1134 1254 1297 1254 1297 1254 1297 1254 1297 8070 Single door Size Code 205 207 210 211 212 C R C R C R C R C R 2134 x 1981 982 1025 982 1025 982 1025 982 1025 982 1025 7066 2134 x 2136 1036 1079 1036 1079 1036 1079 1036 1079 1036 1079 7070 2259 x 1981 1064 1107 1064 1107 1064 1107 1064 1107 1064 1107 7566 2259 x 2136 1119 1162 1119 1162 1119 1162 1119 1162 1119 1162 7570 2284 x 1981 1079 1122 1079 1122 1079 1122 1079 1122 1079 1122 7666 2284 x 2136 1134 1177 1134 1177 1134 1177 1134 1177 1134 1177 7670 2439 x 1981 1199 1242 1199 1242 1199 1242 1199 1242 1199 1242 8066 2439 x 2136 1254 1297 1254 1297 1254 1297 1254 1297 1254 1297 8070 Options for single doors add Factory pre-fitted steel frame 107 Additional Lock Kit, C-type/ R-type (fitted onto door) 48 Retractable plus gear 31 Titan metallic paint finish (exclusive to Design Range doors) 54 Please specify on order if you would like the design elements on the right or the left hand side of the door panel (viewed from outside). Colour options on Design Range doors are free of charge. Available options are: White (RAL 9016), Terra Brown (RAL 8028), Moss Green (RAL 6005), Ruby Red (RAL 3003), Signal Blue (RAL 5005), Jet Black (RAL 9005), Steel Blue (RAL 5011), Light Ivory (RAL 1015), Pigeon Blue (RAL 5014), Fir Green (RAL 6009), Pastel Green (RAL 6019), Anthracite Grey (RAL 7016), Stone Grey (RAL 7030), Light Grey (RAL 7035), Clay Brown (RAL 8003), Window Grey (RAL 7040), Rosewood (Solid) and Golden Oak (Solid). Design Range doors come wrapped as standard 19

GARADOR PVC Panel Doors PVC Panel Doors Surface Low gloss white finish panels fixed as an infill into a rigid box section chassis in Traffic White (RAL 9016). Please note: panel doors are produced with appearance in mind. This may result in some small gaps which could allow water ingress especially in exposed locations. Handle Black handle as standard, optional handles are available. Doors can be supplied without handle holes but will increase the lead time. Terminology : This is the actual door panel size plus the fitting tolerances. The nominal door size should be used for internal dimensions of a timber frame. Size Code: This has traditionally been used to order doors. This may not be the actual door size. Packaging These doors are provided with a film on the front face to protect the door, this must be removed when fitted. Stock availability Standard sized doors are ex-stock on a one-week lead-time. Purpose made sizes on a 4 week lead-time. Canopy gearing (shown as C) Canopy gear is available for all single doors providing a reliable and afforable gearing solution, with no tracks running back into the garage. Retractable gearing (shown as R) Retractable gear is available for all single and double doors providing a reliable and afforable gearing solution, with tracks running back into the garage. 20

GARADOR PVC Panel Doors Single door - standard sizes Size Code Chatsworth Sherborne C R C R 2134 x 1981 798 841 798 841 7066 2134 x 2136 798 841 798 841 7070 2259 x 1981 862 905 862 905 7566 2259 x 2136 862 905 862 905 7570 2284 x 1981 869 912 869 912 7666 2284 x 2136 869 912 869 912 7670 2439 x 1981 938 981 938 981 8066 2439 x 2136 938 981 938 981 8070 Single door - purpose made sizes Chatsworth Sherborne C R C R 2084-2134 x 1981-2136 1015 1058 1015 1058 2135-2284 x 1981-2136 1087 1130 1087 1130 2285-2439 x 1981-2136 1156 1199 1156 1199 Orders for purpose made sizes will only be accepted as nominal door size for unframed version and overall frame size when ordering a framed version. Orders for purpose made framed doors will not be accepted as nominal door size. Options for single doors add Factory pre-framed standard door size finished in white to match door chassis 107 Factory pre-framed purpose made doors 118 Retractable plus gear option on 1981 mm and 2136 mm high doors 31 Diecast metal handles: brass effect, chrome effect, brushed steel and white 27 Poly-wrapping 21 Bottom weatherseal, 2405 mm length (suitable for gaps up to 15 mm between the door and the floor level) 31 Bottom weatherseal, 3000 mm length (suitable for gaps up to 15 mm between the door and the floor level) 35 Additional Lock Kit, C-type / R-type (fitted onto door) 48 21

GARADOR GRP Premier Panel Doors GRP Premier Panel Doors Surface High gloss or woodgrain finish depending on door style. GRP Premier doors are constructed as an infill panel and are fixed into a rigid box section chassis. The infill has a flow coat to the inside face for a smoother finish and reduced translucency. Doors without flow coat are available. Please note: panel doors are produced with appearance in mind. This may result in some small gaps which could allow water ingress especially in exposed locations. Colours Ashurst, Arden and Stamford are available in Gloss White finish only. All other doors are available in the following range of woodgrain colours: Ebony, Matt White, Cherry Oak, Light Oak, Golden Oak, Rosewood, Honey, Golden Brown and Dark Oak. Due to the production processes door colours may vary. Should you require matching doors please specify on your order. Chassis colour - Traffic White (RAL 9016) for Gloss White Doors, Black (RAL 9005) for Ebony coloured doors and Brown (RAL 8028) for all other timber effect GRP doors. Handle Black handle and base plate as standard, optional handles available. Doors can be supplied undrilled and without handle and locking mechanism for use with electric operator. This must be requested at the time of order. Certain panel configurations may only be available without handle or locking, therefore only suitable for electric operation (consult Garador sales office for exact details). Terminology : This is the actual door panel size plus the fitting tolerances. The nominal door size should be used for internal dimensions of a timber frame. Size Code: This has traditionally been used to order doors. This may not be the actual door size. Packaging Supplied with front surface protection as standard. Stock availability All GRP doors are made to order and thus require an approximate lead-time of 4 weeks. Canopy gearing (shown as C) Canopy gear is available for all single doors providing a reliable and afforable gearing solution, with no tracks running back into the garage. Retractable gearing (shown as R) Retractable gear is available for all single and double doors providing a reliable and afforable gearing solution, with tracks running back into the garage. 22

GARADOR GRP Premier Panel Doors Standard Sizes Single door Size Code Arden Ashurst Kenmore Stamford Penshurst C R C R C R C R C R 2134 x 1981 1640 1683 1640 1683 1674 1717 1721 1764 1776 1819 7066 2134 x 2136 1640 1683 1640 1683 1674 1717 1721 1764 1776 1819 7070 2259 x 1981 1715 1758 1715 1758 1760 1803 1792 1835 1914 1957 7566 2259 x 2136 1715 1758 1715 1758 1760 1803 1792 1835 1914 1957 7570 2284 x 1981 1729 1772 1729 1772 1776 1819 1811 1854 1932 1975 7666 2284 x 2136 1729 1772 1729 1772 1776 1819 1811 1854 1932 1975 7670 2439 x 1981 1888 1931 1888 1931 1909 1952 1961 2004 2057 2100 8066 2439 x 2136 1888 1931 1888 1931 1909 1952 1961 2004 2057 2100 8070 2744 x 1981-2105 1-2105 1-2154 1-2171 1 - - 9066 2744 x 2136-2105 1-2105 1-2154 1-2171 1 - - 9070 3049 x 1981-2312 1-2312 1-2385 1-2413 1-2530 1066 3049 x 2136-2312 1-2312 1-2385 1-2413 1-2530 1070 1 Doors only available with electric operation (Handle and Locking not available). Single door Size Code Hartfield 2 Lingfield Swinton Hazelbury Derwent C R C R C R C R C R 2134 x 1981 1776 1819 1776 1819 1776 1819 1912 1955 1963 2006 7066 2134 x 2136 1776 1819 1776 1819 1776 1819 1912 1955 1963 2006 7070 2259 x 1981 1914 1957 1914 1957 1914 1957 2019 2062 2103 2146 7566 2259 x 2136 1914 1957 1914 1957 1914 1957 2019 2062 2103 2146 7570 2284 x 1981 1932 1975 1932 1975 1932 1975 2035 2078 2120 2163 7666 2284 x 2136 1932 1975 1932 1975 1932 1975 2035 2078 2120 2163 7670 2439 x 1981 - - 2057 2100 2057 2100 2170 2213 2243 2286 8066 2439 x 2136 - - 2057 2100 2057 2100 2170 2213 2243 2286 8070 2744 x 1981 - - - - - - - - - - 9066 2744 x 2136 - - - - - - - - - - 9070 3049 x 1981 - - - - - - - - - - 1066 3049 x 2136 - - - - - - - - - - 1070 2 Hartfield doors not available in Matt White colour option. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 26. 23

GARADOR GRP Premier Panel Doors Purpose-made Sizes Single door Arden Ashurst 2 Kenmore Stamford Penshurst 3 C R C R C R C R C R Up to 2133 x 1931-1980 - - - - - - - - 1961 2004 Up to 2133 x 1981-2136 - - 1809 1852 - - - - 1961 2004 Up to 2133 x 2137-2286 - - 2077 2120 - - - - - 2265 2134-2439 x 1931-1980 - - - - - - - - 2251 2294 2134-2439 x 1981-2136 2069 2112 2069 2112 2093 2136 2151 2194 2251 2294 2134-2439 x 2137-2286 - - - 2451 - - - - - 2606 2440-2590 x 1931-1980 - - - - - - - - - - 2440-2590 x 1981-2136 - 2362 1-2362 1-2411 1-2486 1 - - 2440-2590 x 2137-2286 - - - 2704 - - - - - - 2591-2744 x 1931-1980 - - - - - - - - - - 2591-2744 x 1981-2136 - 2362 1-2362 1-2411 1-2430 1 - - 2591-2744 x 2137-2286 - - - 2704 1 - - - - - - 2745-2896 x 1931-1980 - - - - - - - - - - 2745-2896 x 1981-2136 - 2565 1-2565 1-2636 1-2729 1 - - 2745-2896 x 2137-2286 - - - 2932 1 - - - - - - 2897-3049 x 1931-1980 - - - - - - - - - 2799 2897-3049 x 1981-2136 - 2565 1-2565 1-2636 1-2729 1-2799 2897-3049 x 2137-2286 - - - 2890 1 - - - - - 3124 1 Doors only available with electric operation (Handle and Locking not available). 2 Ashurst width available from 2016 mm. 3 Penshurst width available from 2083 mm. Single door Hartfield 4 Lingfield Swinton Hazelbury Derwent C R C R C R C R C R Up to 2133 x 1931-1980 - - - - - - - - - - Up to 2133 x 1981-2136 - - - - - - - - - - Up to 2133 x 2137-2286 - - - - - - - - - - 2134-2439 x 1931-1980 - - - - - - 2251 2294 - - 2134-2439 x 1981-2136 2251 2294 2251 2294 2251 2294 2251 2294 2393 2436 2134-2439 x 2137-2286 - - - - - - - - - - 2440-2590 x 1931-1980 - - - - - - - - - - 2440-2590 x 1981-2136 - - - - - - - - - - 2440-2590 x 2137-2286 - - - - - - - - - - 2591-2744 x 1931-1980 - - - - - - - - - - 2591-2744 x 1981-2136 - - - - - - - - - - 2591-2744 x 2137-2286 - - - - - - - - - - 2745-2896 x 1931-1980 - - - - - - - - - - 2745-2896 x 1981-2136 - - - - - - - - - - 2745-2896 x 2137-2286 - - - - - - - - - - 2897-3049 x 1931-1980 - - - - - - - - - - 2897-3049 x 1981-2136 - - - - - - - - - - 2897-3049 x 2137-2286 - - - - - - - - - - 4 Hartfield doors not available in Matt White colour option and only upto 2286 mm wide. Orders for purpose made sizes will only be accepted as nominal door size for unframed version and overall frame size when ordering a framed version. Orders for purpose made framed doors will not be accepted as nominal door size. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 26. 24

GARADOR GRP Premier Panel Doors Standard Sizes Double door Arden Ashurst Kenmore Penshurst Size Code R R R R 3354 x 1981 2312-2404 2532 1166 3354 x 2136 2312-2404 2532 1170 3659 x 1981 2502 1-2612 1 2745 1266 3659 x 2136 2502 1-2612 1 2745 1270 3964 x 1981 2688 1-2822 1 2954 1366 3964 x 2136 2688 1-2822 1 2954 1370 4269 x 1981 2876 2876 3038 3165 1466 4269 x 2136 2876 2876 3038 3165 1470 1 Doors only available with electric operation (Handle and Locking not available). Double door Hartfield 2 Stamford Swinton Hazelbury Size Code R R R R 3354 x 1981 - - - - 1166 3354 x 2136 - - - - 1170 3659 x 1981 - - - - 1266 3659 x 2136 - - - - 1270 3964 x 1981 - - - - 1366 3964 x 2136 - - - - 1370 4269 x 1981-3177 1 3177 3332 1466 4269 x 2136 3165 3177 1 3177 3332 1470 1 Doors only available with electric operation (Handle and Locking not available). 2 Hartfield doors not available in Matt White colour option. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 26. 25

GARADOR GRP Premier Panel Doors Purpose-made Sizes Double door Arden Ashurst Kenmore Penshurst R R R R 3050-3355 x 1981-2136 2470-2571 3753 3050-3355 x 2137-2286 - - - 3111 3356-3660 x 1981-2136 2655 1-2778 1 2912 3356-3660 x 2137-2286 - - - 3346 3661-3965 x 1981-2136 2840 1-2988 1 2705 3661-3965 x 2137-2286 - - - 3590 3966-4117 x 1981-2136 3026 1 3026 2 3188 1 3320 3966-4117 x 2137-2286 - 3482 2-4111 4118-4269 x 1981-2136 3026 3026 3188 3320 4118-4269 x 2137-2286 - 3482-3820 1 Doors only available with electric operation (Handle and Locking not available). 2 Only available from 4000 mm. Double door Stamford Hazelbury R R 3050-3355 x 1981-2136 - - 3050-3355 x 2137-2286 - - 3356-3660 x 1981-2136 - - 3356-3660 x 2137-2286 - - 3661-3965 x 1981-2136 - - 3661-3965 x 2137-2286 - - 3966-4117 x 1981-2136 3343 1-3966-4117 x 2137-2286 - - 4118-4269 x 1981-2136 3343 1 3373 4118-4269 x 2137-2286 - - 1 Doors only available with electric operation (Handle and Locking not available). Orders for purpose made sizes will only be accepted as nominal door size for unframed version and overall frame size when ordering a framed version. Orders for purpose made framed doors will not be accepted as nominal door size. Options Single doors add Double doors add Factory pre-framed standard single doors 107 - Steel frame for standard double doors - 160 Factory pre-framed purpose-made single doors 118 - Steel frame for purpose-made double doors - 176 Additional Lock Kit, C-type/ R-type (fitted onto door) 48 - Retractable plus gear available on 1931, 1981 and 2136 mm high doors up to 2744 mm wide 31 - Diecast metal handles with matching base plates: brass effect, chrome effect and white 34 34 Door without inside flow-coat deduct 100 deduct 100 26

GARADOR GRP Premier Panel Doors Options GRP Window options Additional Cost (Width mm) for standard and purpose-made single doors Stamford Arden Ashurst Kenmore Hazelbury up to 2743 2744-3049 Derwent Semi-translucent, no leading Semi-translucent, diamond leading Semi-translucent, square leading Smoked, no leading Smoked, diamond leading Smoked, square leading Imitation black, sunrise Imitation black, no leading Imitation black, square leading Imitation black, diamond leading Please state window code on order. A A A A A 145 217 no on-cost - B B B B 242 358 Add 94 - C C C C 242 358 Add 94 D D - D D 146 217 no on-cost - E - E E 242 358 Add 94 - F - F F 242 358 Add 94 G - - - - 35 55 - - H H H H 146 217 no on-cost - I I I I 242 358 Add 94 - J J J j 242 358 Add 94 GRP Window options for standard and purpose-made double doors Stamford Arden Ashurst Kenmore Hazelbury Semi-translucent, no leading Semi-translucent, diamond leading Semi-translucent, square leading Smoked, no leading Smoked, diamond leading Smoked, square leading Imitation black, sunrise Imitation black, no leading Imitation black, square leading Imitation black, diamond leading Please state window code on order. Additional Cost (Width mm) 3354-3963 3964-4269 A A A A A 257 291 - B B B B 418 502 - C C C C 418 502 D D - D D 257 291 - E - E E 418 502 - F - F F 418 502 G - - - - 77 101 - H H H H 257 291 - I I I I 418 502 - J J J J 418 502 Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. 27

GARADOR Timber Panel Doors Timber Panel Doors Surface Timber doors are supplied untreated and require immediate on-site finishing unless fully finished option specified. Timber is a natural material and therefore Garador cannot guarantee to be able to produce matching timber garage doors. Chassis colours will be Brown (RAL 8028) on all timber doors Please note: panel doors are produced with appearance in mind. This may result in some small gaps which could allow water ingress especially in exposed locations. Handle Black handle and base plate supplied as standard, optional handles available. Doors can alternatively be supplied undrilled and without handle and locking mechanism for use with electric operator. Packaging Supplied with front surface protection as standard. Stock availability Timber doors are generally made to order and thus require an approximate lead-time of 4 weeks. Terminology : This is the actual door panel size plus the fitting tolerances. The nominal door size should be used for internal dimensions of a timber frame. Size Code: This has traditionally been used to order doors. This may not be the actual door size. Canopy gearing (shown as C) Canopy gear is available for all single doors providing a reliable and afforable gearing solution, with no tracks running back into the garage. Retractable gearing (shown as R) Retractable gear is available for all single and double doors providing a reliable and afforable gearing solution, with tracks running back into the garage. 28

GARADOR Timber Panel Doors Standard Sizes Single door Size Code Vertical Cedar Horizontal Cedar Countryman Hampton Chevron Cedar C R C R C R C R C R 2134 x 1981 1293 1336 1360 1403 1614 1657 1614 1657 1923 1966 7066 2134 x 2136 1305 1348 1372 1415 1628 1671 1628 1671 1954 1997 7070 2134 x 2286-1476 - 1552-1831 - 1831-2063 7076 2259 x 1981 1360 1403 1431 1474 1699 1742 1699 1742 2052 2095 7566 2259 x 2136 1373 1416 1445 1488 1713 1756 1713 1756 2062 2105 7570 2284 x 1981 1360 1403 1568 1611 1699 1742 1699 1742 2052 2095 7666 2284 x 2136 1373 1416 1445 1488 1713 1756 1713 1756 2062 2105 7670 2284 x 2286-1533 - 1611-1838 - 1838-2164 7676 2439 x 1981 1440 1483 1516 1559 1796 1839 1796 1839 2120 2163 8066 2439 x 2136 1451 1494 1526 1569 1810 1853 1810 1853 2131 2174 8070 2439 x 2286-1626 - 1706-1946 - 1946-2222 8076 2744 x 1981-1697 - 1783-2027 - 2027-2364 9066 2744 x 2136-1708 - 1794-2049 - 2049-2399 9070 2744 x 2286-1865 - 1960-2194 - 2194-2477 9076 3049 x 1981-1965 - 2062-2289 - 2289-2656 1066 3049 x 2136-1983 - 2084-2309 - 2309-2676 1070 Single door Size Code Barrington Kingsbury Adlington Ashton 1 Rochdale 1 C R C R C R C R C R 2134 x 1981 1642 1685 1628 1671 1479 1522 1923 1966 1945 1988 7066 2134 x 2136 1653 1696 1641 1684 1479 1522 1954 1997 1957 2000 7070 2134 x 2286-1830 - 1815-1636 - 2063-2088 7076 2259 x 1981 1707 1750 1693 1736 1543 1586 2052 2095 2014 2057 7566 2259 x 2136 1718 1761 1706 1749 1543 1586 2062 2105 2026 2069 7570 2284 x 1981 1707 1750 1693 1736 1543 1586 2052 2095 2014 2057 7666 2284 x 2136 1718 1761 1706 1749 1543 1586 2062 2105 2026 2069 7670 2284 x 2286-1892 - 1878-1708 - 2164-2127 7676 2439 x 1981 1767 1810 1752 1795 1699 1742 2120 2163 2079 2122 8066 2439 x 2136 1777 1820 1765 1808 1699 1742 2131 2174 2097 2140 8070 2439 x 2286-1946 - 1930-1742 - 2222-2181 8076 2744 x 1981-2016 - 1949-1811 - 2364-2379 9066 2744 x 2136-2033 - 1965-1811 - 2399-2418 9070 2744 x 2286-2193 - 2127-1954 - 2477-2494 9076 3049 x 1981-2282 - 2214-1958 - 2656-2675 1066 3049 x 2136-2301 - 2232-1958 - 2676-2693 1070 1 Ashton and Rochdale doors may have cross bracing and/or locking rods behind the windows depending upon the size and gear type. For further options please see page 37. 29

GARADOR Timber Panel Doors Standard Sizes Single door Size Code Sandhurst 1 Shaftesbury Grantham Seymour C R C R C R C R 2134 x 1981 1884 1927 1459 1502 981 1024 1394 1437 7066 2134 x 2136 1896 1939 1469 1512 981 1024 1405 1448 7070 2134 x 2286-2026 - 1578 1043 1086-1514 7076 2259 x 1981 1953 1996 1487 1530 1047 1090 1423 1466 7566 2259 x 2136 1965 2008 1498 1541 1047 1090 1435 1478 7570 2284 x 1981 1953 1996 1487 1530 1047 1090 1423 1466 7666 2284 x 2136 1965 2008 1498 1541 1047 1090 1435 1478 7670 2284 x 2286-2066 - 1600 1117 1160-1536 7676 2439 x 1981 2018 2061 1512 1555 1085 1128 1448 1491 8066 2439 x 2136 2034 2077 1524 1567 1085 1128 1459 1502 8070 2439 x 2286-2120 - 1614-1202 - 1550 8076 2744 x 1981-2287 - 1830-1233 - 1752 9066 2744 x 2136-2326 - 1845-1233 - 1765 9070 2744 x 2286-2403 - 1931-1319 - 1839 9076 3049 x 1981-2582 - 2059-1340 - 1976 1066 3049 x 2136-2601 - 2078-1340 - 1977 1070 1 Sandhurst doors may have cross bracing and/or locking rods behind the windows depending upon the size and gear type. Single door Size Code Tudor Bosworth Wolsey Hinton 2 C R C R C R C R 2134 x 1981 1459 1502 1477 1520 1457 1500 2023 2066 7066 2134 x 2136 1469 1512 1488 1531 1467 1510 2035 2078 7070 2134 x 2286-1578 - 1597-1576 - 2146 7076 2259 x 1981 1487 1530 1507 1550 1485 1528 2149 2192 7566 2259 x 2136 1498 1541 1519 1562 1496 1539 2161 2204 7570 2284 x 1981 1487 1530 1507 1550 1485 1528 2149 2192 7666 2284 x 2136 1498 1541 1519 1562 1496 1539 2161 2204 7670 2284 x 2286-1600 - 1621-1598 - 2262 7676 2439 x 1981 1512 1555 1531 1574 1510 1553 2213 2256 8066 2439 x 2136 1524 1567 1542 1585 1522 1565 2227 2270 8070 2439 x 2286-1614 - 1633-1612 - 2315 8076 2744 x 1981-1830 - 1850-1785 - 2500 9066 2744 x 2136-1845 - 1863-1798 - 2513 9070 2744 x 2286-1931 - 1950-1873 - 2597 9076 3049 x 1981-2059 - 2078-1995 - 2825 1066 3049 x 2136-2078 - 2097-1997 - 2842 1070 2 Hinton doors may have cross bracing and/or locking rods behind the windows depending upon the size and gear type. For further options please see page 37. 30

GARADOR Timber Panel Doors Purpose-made Sizes Single door Vertical Cedar Horizontal Cedar Countryman Hampton C R C R C R C R 1930-1984 x 1931-1981 1406 1449 1478 1521 1970 2013 1970 2013 1930-1984 x 1982-2136 1416 1459 1490 1533 2027 2070 2027 2070 1930-1984 x 2137-2286 - 1586-1667 - 2195-2195 1930-1984 x 2287-2439 - 1626-1706 - 2355-2355 1985-2284 x 1931-1981 1472 1515 1548 1591 2077 2120 2077 2120 1985-2284 x 1982-2136 1483 1526 1560 1603 2141 2184 2141 2184 1985-2284 x 2137-2286 - 1642-1725 - 2306-2306 1985-2284 x 2287-2439 - 1680-1764 - 2496-2496 2285-2439 x 1931-1981 1550 1 1593 1631 1 1674 1 2106 1 2149 1 2106 1 2149 2285-2439 x 1982-2136 1560 1 1603 1642 1 1685 1 2170 1 2213 1 2170 1 2213 2285-2439 x 2137-2286 - 1732 - - - - - - 2285-2439 x 2287-2439 - 1798 - - - - - - 2440-2744 x 1931-1981 - 1802 - - - - - - 2440-2744 x 1982-2136 - 1815 - - - - - - 2440-2744 x 2137-2286 - 1969 - - - - - - 2440-2744 x 2287-2439 - 2023 - - - - - - 2745-3049 x 1931-1981 - 2064 - - - - - - 2745-3049 x 1982-2136 - 2085 - - - - - - 1 These doors are not available over 2438 mm wide. Single door Barrington Kingsbury Adlington Ashton C R C R C R C R 1930-1984 x 1931-1981 1780 1823 1768 1811 1519 1562 2068 2111 1930-1984 x 1982-2136 1791 1834 1779 1822 1529 1572 2079 2122 1930-1984 x 2137-2286 - 1970-1953 - 1699-2253 1930-1984 x 2287-2439 - 2007-1997 - 1737-2297 1985-2284 x 1931-1981 1845 1888 1833 1876 1585 1628 2133 2176 1985-2284 x 1982-2136 1857 1900 1844 1887 1596 1639 2144 2187 1985-2284 x 2137-2286 - 2032-2016 - 1755-2316 1985-2284 x 2287-2439 - 2070-2059 - 1792-2359 2285-2439 x 1931-1981 1905 1 1948 1891 1 1934 1662 1 1705 2191 2234 2285-2439 x 1982-2136 1915 1 1958 1903 1 1946 1673 1 1716 2203 2246 2285-2439 x 2137-2286 - 2086-2069 1802 1845-2369 2285-2439 x 2287-2439 - 2138-2127 1868 1911-2427 2440-2744 x 1931-1981 - 2156-2089 1872 1915-2389 2440-2744 x 1982-2136 - 2171-2103 1883 1926-2403 2440-2744 x 2137-2286 - 2334-2267 2038 2081-2567 2440-2744 x 2287-2439 - 2386-2320 2091 2134-2620 2745-3049 x 1931-1981 - 2420-2352 2134 2177-2652 2745-3049 x 1982-2136 - 2440-2371 2152 2195-2671 1 These doors are not available over 2438 mm wide. Orders for purpose made sizes will only be accepted as nominal door size for unframed version and overall frame size when ordering a framed version. Orders for purpose made framed doors will not be accepted as nominal door size. For further options please see page 37. 31

GARADOR Timber Panel Doors Purpose-made Sizes Single door Shaftesbury Grantham Seymour C R C R C R 1930-1984 x 1931-1981 1532 1575 1286 1329 1532 1575 1930-1984 x 1982-2136 1543 1586 1297 1340 1543 1586 1930-1984 x 2137-2286 - 1653-1407 - 1653 1930-1984 x 2287-2439 - 1704-1458 - 1704 1985-2284 x 1931-1981 1562 1605 1316 1359 1562 1605 1985-2284 x 1982-2136 1574 1617 1328 1371 1574 1617 1985-2284 x 2137-2286 - 1676-1430 - 1676 1985-2284 x 2287-2439 - 1726-1480 - 1726 2285-2439 x 1931-1981 1587 1 1630 1341 1 1384 1587 1 1630 2285-2439 x 1982-2136 1597 1 1640 1351 1 1394 1597 1 1640 2285-2439 x 2137-2286 - 1689-1443 - 1689 2285-2439 x 2287-2439 - 1761-1515 - 1761 2440-2744 x 1931-1981 - 1890-1644 - 1890 2440-2744 x 1982-2136 - 1905-1658 - 1905 2440-2744 x 2137-2286 - 1978-1732 - 1978 2440-2744 x 2287-2439 - 2032-1786 - 2032 2745-3049 x 1931-1981 - 2115-1869 - 2115 2745-3049 x 1982-2136 - 2116-1870 - 2116 1 These doors are not available over 2438 mm wide. Single door Tudor Bosworth Wolsey C R C R C R 1930-1984 x 1931-1981 1597 1640 1616 1659 1595 1638 1930-1984 x 1982-2136 1607 1650 1627 1670 1605 1648 1930-1984 x 2137-2286 - 1717-1736 - 1715 1930-1984 x 2287-2439 - 1768-1788 - 1772 1985-2284 x 1931-1981 1626 1669 1646 1689 1624 1667 1985-2284 x 1982-2136 1639 1682 1657 1700 1636 1679 1985-2284 x 2137-2286 - 1740-1759 - 1737 1985-2284 x 2287-2439 - 1791-1811 - 1795 2285-2439 x 1931-1981 1651 1 1694 1670 1 1713 1649 1 1692 2285-2439 x 1982-2136 1662 1 1705 1682 1 1725 1660 1 1703 2285-2439 x 2137-2286 - 1753-1771 - 1751 2285-2439 x 2287-2439 - 1851-1870 - 1829 2440-2744 x 1931-1981 - 1970-1988 - 1923 2440-2744 x 1982-2136 - 1983-2003 - 1938 2440-2744 x 2137-2286 - 2070-2090 - 2011 2440-2744 x 2287-2439 - 2123-2143 - 2064 2745-3049 x 1931-1981 - 2199-2218 - 2134 2745-3049 x 1982-2136 - 2218-2235 - 2136 1 These doors are not available over 2438 mm wide. Orders for purpose made sizes will only be accepted as nominal door size for unframed version and overall frame size when ordering a framed version. Orders for purpose made framed doors will not be accepted as nominal door size. 32 For further options please see page 37.

GARADOR Timber Panel Doors Standard Sizes Double door Vertical Cedar Horizontal Cedar Countryman Hampton R R R R 3049 x 2286 2231 2261 2889 2889 1076 3354 x 1981 2231 2262 2859 2859 1166 3354 x 2136 2294 2325 2920 2920 1170 3354 x 2286 2480 2513 3168 3168 1176 3659 x 1981 2515 2549 3182 3182 1266 3659 x 2136 2578 2611 3245 3245 1270 3659 x 2286 2807 2843 3544 3544 1276 3964 x 1981 2973 3015 3508 3508 1366 3964 x 2136 3067 3109 3603 3603 1370 3964 x 2286 3329 3373 3918 3918 1376 4269 x 1981 2909 2952 3613 3613 1466 4269 x 2136 2973 3015 3676 3676 1470 4574 x 1981 3284 3330 - - 1566 4574 x 2136 3379 3423 - - 1570 4879 x 1981 3584 3631 - - 1666 4879 x 2136 3614 3662 - - 1670 Size Code Double door Barrington Kingsbury Adlington Ashton 1 R R R R 3049 x 2286 2655 2531 2477 2949 1076 3354 x 1981 2634 2524 2430 2861 1166 3354 x 2136 2697 2587 2492 2924 1170 3354 x 2286 2924 2804 2700 3171 1176 3659 x 1981 2933 2822 2691 3288 1266 3659 x 2136 2996 2886 2753 3351 1270 3659 x 2286 3270 3163 3002 3659 1276 3964 x 1981 3414 3341 3260 3856 1366 3964 x 2136 3508 3434 3354 3951 1370 3964 x 2286 3813 3734 3646 4300 1376 4269 x 1981 3351 3278 3197 3794 1466 4269 x 2136 3414 3341 3260 3856 1470 4574 x 1981 3725 3677-4181 1566 4574 x 2136 3819 3771-4274 1570 4879 x 1981 4022 3976-4527 1666 4879 x 2136 4055 4008-4557 1670 1 Ashton doors may have cross bracing and/or locking rods behind the windows depending upon the size and gear type. Size Code For further options please see page 37. 33

GARADOR Timber Panel Doors Standard Sizes Double door Rochdale 1, 2 Sandhurst 1 Shaftesbury Size Code R R R 3049 x 2286 3121 2742 2154 1076 3354 x 1981 3017 2725 2127 1166 3354 x 2136 3080 2787 2190 1170 3354 x 2286 3344 3023 2367 1176 3659 x 1981 3444 3074 2361 1266 3659 x 2136 3508 3137 2424 1270 3659 x 2286 3831 3423 2637 1276 3964 x 1981 4013 3587 2751 1366 3964 x 2136 4109 3680 2844 1370 3964 x 2286 4470 4005 3080 1376 4269 x 1981 3951 3524 2688 1466 4269 x 2136 4013 3587 2751 1470 4574 x 1981 4473 4008 3080 1566 4574 x 2136 4567 4103 3174 1570 4879 x 1981 4778 4447 3426 1666 4879 x 2136 4808 4479 3458 1670 1 Rochdale and Sandhurst doors may have cross bracing and/or locking rods behind the windows depending upon the size and gear type. 2 Rochdale doors up to 3659 mm wide will be manufactured with one arch not the two as shown above. Double door Grantham Seymour Tudor Wolsey Size Code R R R R 3049 x 2286 1886 2132 2154 2420 1076 3354 x 1981 1846 2065 2127 2395 1166 3354 x 2136 1909 2127 2190 2458 1170 3354 x 2286 2056 2297 2367 2634 1176 3659 x 1981 2088 2331 2361 2628 1266 3659 x 2136 2151 2392 2424 2691 1270 3659 x 2286 2336 2605 2637 2904 1276 3964 x 1981 2336 2718 2751 3018 1366 3964 x 2136 2430 2813 2844 3112 1370 3964 x 2286 2625 3049 3080 3348 1376 4269 x 1981 2274 2655 2688 2955 1466 4269 x 2136 2336 2718 2751 3018 1470 4574 x 1981 - - 3080 3348 1566 4574 x 2136 - - 3174 3441 1570 4879 x 1981 - - 3426 3694 1666 4879 x 2136 - - 3458 3725 1670 For further options please see page 37. 34

GARADOR Timber Panel Doors Purpose-made Sizes Double door Vertical Cedar Horizontal Cedar Countryman Hampton R R R R 2745-3049 x 2137-2286 2455 2488 3080 3080 2745-3049 x 2287-2439 2578 2612 3235 3235 3050-3659 x 1931-1981 2766 2804 3396 3396 3050-3659 x 1982-2136 2835 2873 3464 3464 3050-3659 x 2137-2286 3087 3128 3783 3783 3050-3659 x 2287-2439 3241 3285 3972 3972 3660-4269 x 1931-1981 3373 3420 4023 4023 3660-4269 x 1982-2136 3478 3524 4128 4128 3660-4269 x 2137-2286 3652 3700 4333 4333 3660-4269 x 2287-2439 3826 3877 4541 4541 4270-5000 x 1931-1981 3942 3993 - - 4270-5000 x 1982-2136 3976 4028 - - Double door Barrington Kingsbury Adlington Ashton 1 R R R R 2745-3049 x 2137-2286 2923 2782 2724 3242 2745-3049 x 2287-2439 3067 2924 2862 3405 3050-3659 x 1931-1981 3226 3105 2959 3616 3050-3659 x 1982-2136 3295 3174 3028 3685 3050-3659 x 2137-2286 3596 3478 3301 4023 3050-3659 x 2287-2439 3776 3652 3467 4226 3660-4269 x 1931-1981 3858 3780 3690 4346 3660-4269 x 1982-2136 3961 3883 3793 4449 3660-4269 x 2137-2286 4160 4076 3983 4671 3660-4269 x 2287-2439 4358 4270 4172 4895 4270-5000 x 1931-1981 4425 4374-4978 4270-5000 x 1982-2136 4461 4408-5012 1 Ashton doors may have cross bracing and/or locking rods behind the windows depending upon the size and gear type. Orders for purpose made sizes will only be accepted as nominal door size for unframed version and overall frame size when ordering a framed version. Orders for purpose made framed doors will not be accepted as nominal door size. For further options please see page 37. 35

GARADOR Timber Panel Doors Purpose-made Sizes Double door Rochdale 1, 2 Sandhurst 1 Shaftesbury R R R 2745-3049 x 2137-2286 3432 3015 2368 2745-3049 x 2287-2439 3605 3166 2487 3050-3659 x 1931-1981 3789 3382 2597 3050-3659 x 1982-2136 3858 3452 2665 3050-3659 x 2137-2286 4214 3765 2900 3050-3659 x 2287-2439 4424 3953 3046 3660-4269 x 1931-1981 4519 4049 3129 3660-4269 x 1982-2136 4622 4152 3233 3660-4269 x 2137-2286 4853 4359 3395 3660-4269 x 2287-2439 5084 4567 3555 4270-5000 x 1931-1981 5255 4893 3768 4270-5000 x 1982-2136 5290 4926 3803 1 Rochdale and Sandhurst doors may have cross bracing and/or locking rods behind the windows depending upon the size and gear type. 2 Rochdale doors up to 3659 mm wide will be manufactured with one arch not the two as shown above. Double door Grantham Seymour Tudor Wolsey R R R R 2745-3049 x 2137-2286 2074 2347 2368 2635 2745-3049 x 2287-2439 2178 2465 2487 2754 3050-3659 x 1931-1981 2295 2562 2597 2865 3050-3659 x 1982-2136 2365 2631 2665 2933 3050-3659 x 2137-2286 2569 2867 2900 3168 3050-3659 x 2287-2439 2697 3010 3046 3312 3660-4269 x 1931-1981 2673 3094 3129 3397 3660-4269 x 1982-2136 2776 3198 3233 3499 3660-4269 x 2137-2286 2916 3358 3395 3662 3660-4269 x 2287-2439 3055 3519 3555 3823 4270-5000 x 1931-1981 - - 3768 4035 4270-5000 x 1982-2136 - - 3803 4070 Orders for purpose made sizes will only be accepted as nominal door size for unframed version and overall frame size when ordering a framed version. Orders for purpose made framed doors will not be accepted as nominal door size. For further options please see page 37. 36

GARADOR Timber Panel Doors Options Timber door window options Prices in stated per door Standard Georgian 1 Diagonal 1 Single doors Double doors Single doors Double doors Single doors Double doors Plain no on-cost no on-cost 96 133 96 133 Crystal no on-cost no on-cost 96 133 96 133 1 Only available on Sandhurst. Windows are manufactured from 4 mm acrylic panes. Please state on order if clear or stippled panes required. Options Single doors add Double doors add Factory pre-framed standard single doors 107 - Steel frame for standard double doors - 160 Factory pre-framed purpose-made single doors 118 - Steel frame for purpose-made double doors - 176 Additional Lock Kit, C-type/ R-type (fitted onto door) 48 - Retractable plus gear available on 1931, 1981 and 2136 mm high doors up to 2744 mm wide Factory fully finished stain in Light Oak, Antique Oak, Mahogany, Walnut, Chestnut and Ebony 31-115 171 Factory white primer ready for on-site painting 156 240 Factory fully finished painting (any RAL colour) 260 453 Diecast metal handles with matching base plates: brass effect, chrome effect, brushed steel and white Bottom weatherseal, 2405 mm length (suitable for gaps up to 15 mm between the door and the floor level) Bottom weatherseal, 3000 mm length (suitable for gaps up to 15 mm between the door and the floor level) Steel chassis and frame if applicable finished in RAL colour Moss Green (RAL 6005), Ruby Red (RAL 3003), Signal Blue (RAL 5005), Jet Black (RAL 9005), Steel Blue (RAL 5011), Light Ivory (RAL 1015), Pigeon Blue (RAL 5014), Fir Green (RAL 6009), Pastel Green (RAL 6019), Anthracite Grey (RAL 7016), Stone Grey (RAL 7030), Light Grey (RAL 7035), Clay Brown (RAL 8003), Window Grey (RAL 7040), Rosewood (Solid) and Golden Oak (Solid). Additional lead time may apply. 34 34 31 31 35 35 103 163 37

GARADOR Steel and Timber Garage Side Doors Steel and Timber Garage Side Doors Surface Steel doors constructed around a strong steel box section chassis in Traffic White (RAL 9016) as standard. Timber doors constructed using solid red cedar, built around a strong steel box section chassis. A range of stain options are available. Handle Supplied with lever/ lever handle on left side (viewed outside) Terminology : This is the actual door panel size plus the fitting tolerances. The nominal door size should be used for internal dimensions of a timber frame. Size Code: This has traditionally been used to order doors. This may not be the actual door size. Stock Availability Four to six week week lead time on standard and purpose made sizes. Steel door - standard sizes Nominal Door Size Overall frame size (between fix) 1 Georgian Beaumont Cathedral Beaumont with Windows 2 Carlton Size Code 762 x 1931 882 x 1989 551 3 551 3 551 3 617 3 436 2664 762 x 1981 882 x 2039 563 3 563 3 563 3 629 3 449 2666 762 x 2136 882 x 2194 580 3 580 3 580 3 646 3 465 2670 914 x 1931 1034 x 1989 574 3 574 3 574 3 640 3 459 3064 914 x 1981 1034 x 2039 585 3 585 3 585 3 651 3 470 3066 914 x 2136 1034 x 2194 604 3 604 3 604 3 670 3 488 3070 1067 x 1931 1187 x 1989 596 596 596 664 482 3664 1067 x 1981 1187 x 2039 609 609 609 675 495 3666 1067 x 2134 1187 x 2194 626 626 626 692 512 3670 1209 x 1931 1320 x 1989 619 619 619 685 505 4064 1209 x 1981 1320 x 2039 631 631 631 698 517 4066 1209 x 2136 1320 x 2194 637 637 637 703 533 4070 1 No fitting clearance allowed. 2 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if plain or crystal panes. 3 Doors under 1000 mm width only have one vertical column of pressings. These doors vary from images shown. 38

GARADOR Steel and Timber Garage Side Doors Steel door - purpose-made sizes Overall frame size (between fix) 1 Georgian Beaumont Cathedral Beaumont with Windows 2 Carlton 700-1066 x 1931-2136 820-1186 x 1989-2194 711 4 711 4 711 4 778 4 609 2067-1209 x 1931-2136 1187-1320 x 1989-2194 757 757 757 824 653 1 No fitting clearance allowed. 2 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if plain or crystal panes. 4 Only available from 755 mm wide. Overall frame size is 875 mm wide for Cathedral, Beaumont and Georgian only. All doors come factory pre-framed, right hand hinged with the handle on the left as standard (viewed from outside). Supplied with lever / lever handle set. Doors only available to open outwards. Timber door - standard sizes Nominal Door Size Overall frame size (between fix) 1 Vertical Cedar Horizontal Cedar Kingsbury Seymour Half Chevron (Left) Half Chevron (Right) Size Code 762 x 1931 882 x 1989 999 1023 1085 999 1197 1197 2664 762 x 1981 882 x 2039 1011 1034 1096 1011 1207 1207 2666 762 x 2136 882 x 2194 1028 1050 1112 1028 1225 1225 2670 914 x 1931 1034 x 1989 1034 1055 1117 1034 1230 1230 3064 914 x 1981 1034 x 2039 1045 1067 1130 1045 1241 1241 3066 914 x 2136 1034 x 2194 1061 1085 1145 1061 1258 1258 3070 1067 x 1931 1187 x 1989 1067 1090 1152 1067 1264 1264 3664 1067 x 1981 1187 x 2039 1078 1101 1163 1078 1274 1274 3666 1067 x 2134 1187 x 2194 1096 1117 1179 1096 1292 1292 3670 1209 x 1931 1320 x 1989 1101 1122 1184 1101 1297 1297 4064 1209 x 1981 1320 x 2039 1112 1135 1197 1112 1309 1309 4066 1209 x 2136 1320 x 2194 1130 1152 1212 1130 1325 1325 4070 1 No fitting clearance allowed. Timber door - purpose-made sizes Overall frame size (between fix) 1 Vertical Cedar Horizontal Cedar Kingsbury 2 Seymour Half Chevron (Left) Half Chevron (Right) 700-1066 x 1931-2136 820-1186 x 1989-2194 1207 1230 1292 1207 1403 1403 2067-1209 x 1931-2136 1187-1320 x 1989-2194 1274 1297 1359 1274 1471 1471 1 No fitting clearance allowed. 2 Minimum overall frame width for Kingsbury is 826 mm. 39

GARADOR Steel and Timber Side-hinged Doors Steel and Timber Side-hinged Doors Surface Steel Side-hinged doors are constructed around a strong steel box section chassis in Traffic White (RAL 9016) as standard. Timber doors constructed using solid red cedar, built around our steel box section chassis. A range of stain options are available. Handle Supplied with black lever/ lever handle on right side (viewed outside) Terminology : This is the actual door panel size plus the fitting tolerances. The nominal door size should be used for internal dimensions of a timber frame. Size Code: This has traditionally been used to order doors. This may not be the actual door size. Packaging All steel side-hinged doors are poly-wrapped as standard. Stock Availability Four to six week lead time on standard and purpose made sizes. Steel door - standard sizes Nominal Door Size Overall frame size (between fix) 1 Georgian Beaumont Cathedral Beaumont with Windows 2 Carlton Size Code 1810 x 1830 1930 x 1890 - - - - 929 6060 1964 x 1830 2084 x 1890 - - - - 947 6660 1964 x 1931 2084 x 1991 - - - - 967 6664 1964 x 1981 2084 x 2041 - - - - 967 6666 1964 x 2136 2084 x 2196 - - - - 988 6670 2114 x 1830 2234 x 1890 - - - - 988 7060 2114 x 1931 2234 x 1991 1084 1084 1084 1343 1006 7064 2114 x 1981 2234 x 2041 1084 1084 1084 1343 1006 7066 2114 x 2136 2234 x 2196 1104 1104 1104 1362 1027 7070 2239 x 1931 2359 x 1991 1143 1143 1143 1403 1067 7564 2239 x 1981 2359 x 2041 1143 1143 1143 1403 1067 7566 2239 x 2136 2359 x 2196 1165 1165 1165 1425 1084 7570 2264 x 1931 2384 x 1991 1165 1165 1165 1425 1084 7664 2264 x 1981 2384 x 2041 1165 1165 1165 1425 1084 7666 2264 x 2136 2384 x 2196 1182 1182 1182 1442 1104 7670 2419 x 1931 2539 x 1991 1224 1224 1224 1483 1143 8064 2419 x 1981 2539 x 2041 1224 1224 1224 1483 1143 8066 2419 x 2136 2539 x 2196 1242 1242 1242 1503 1165 8070 1 No fitting clearance allowed. 2 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if plain or crystal panes. Prices in bold show stock doors (50/50 configuration) on a one week lead time. All doors come factory pre-framed, right hand door leaf leading as standard (viewed from the outside) with lever / lever handle set. Door stays are recommended in windy locations. The above doors are shown as 50/50 door leaves configuration. Up to 2234 mm overall frame width these doors are also available as a 1/3 2/3 door configuration. Prices are the same but please be aware panel configurations on Georgian, Beaumont & Cathedral doors will have 3 pressing columns with increased spacing between the pressing (1/3 2/3 is a term used to describe these doors but please note the 1/3 door leaf is always 800 mm wide with the 2/3 element varying to make the desired overall width). 1/3 leaf is always leading. 40

GARADOR Steel and Timber Side-hinged Doors Steel door - purpose-made sizes Overall frame size (between fix) 1 Georgian Beaumont Cathedral Beaumont with Windows 2 Carlton 1930-2234 x 1890-2041 - - - - 1077 1930-2234 x 2042-2196 - - - - 1110 2235-2384 x 1890-1990 - - - - 1124 2235-2384 x 1991-2041 1233 1233 1233 1493 1165 2235-2384 x 2042-2196 1246 1246 1246 1507 1190 2385-2539 x 1890-1990 - - - - 1179 2385-2539 x 1991-2041 1312 1312 1312 1570 1232 2385-2539 x 2042-2196 1329 1329 1329 1588 1248 1 No fitting clearance allowed. 2 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if plain or crystal panes. All doors come factory pre-framed, right hand door leaf leading as standard (viewed from the outside) with lever / lever handle set. Door stays are recommended in windy locations. The above doors are shown as 50/50 door leaves configuration. Up to 2234 mm overall frame width these doors are also available as a 1/3 2/3 door configuration. Prices are the same but please be aware panel configurations on Georgian, Beaumont & Cathedral doors will have 3 pressing columns with increased spacing between the pressing (1/3 2/3 is a term used to describe these doors but please note the 1/3 door leaf is always 800 mm wide with the 2/3 element varying to make the desired overall width). 1/3 leaf is always leading. 41

GARADOR Steel and Timber Side-hinged Doors Standard Sizes Timber door - standard sizes Nominal Door Size Overall frame size (between fix) 1 Vertical Cedar 2 Horizontal 3 Kingsbury 3 Seymour 3 Tudor Cedar 2 Size Code 1810 x 1830 1930 x 1890 1550 1585 1752 1459 1459 6060 1964 x 1830 2084 x 1890 1572 1609 1752 1482 1482 6660 1964 x 1931 2084 x 1991 1572 1609 1752 1482 1482 6664 1964 x 1981 2084 x 2041 1588 1626 1758 1500 1500 6666 1964 x 2136 2084 x 2196 1588 1626 1780 1500 1500 6670 2114 x 1830 2234 x 1890 1617 1653 1780 1526 1526 7060 2114 x 1931 2234 x 1991 1624 1658 1796 1533 1533 7064 2114 x 1981 2234 x 2041 1629 1665 1819 1538 1538 7066 2114 x 2136 2234 x 2196 1629 1665 1830 1538 1538 7070 2239 x 1931 2359 x 1991 1645 1682 1892 1556 1556 7564 2239 x 1981 2359 x 2041 1650 1688 1904 1562 1562 7566 2239 x 2136 2359 x 2196 1661 1698 1943 1572 1572 7570 2264 x 1931 2384 x 1991 1645 1682 1898 1556 1556 7664 2264 x 1981 2384 x 2041 1650 1688 1925 1562 1562 7666 2264 x 2136 2384 x 2196 1661 1698 1966 1572 1572 7670 2419 x 1931 2539 x 1991 1718 1755 2089 1629 1629 8064 2419 x 1981 2539 x 2041 1724 1760 2100 1634 1634 8066 2419 x 2136 2539 x 2196 1729 1765 2162 1639 1639 8070 1 No fitting clearance allowed. 2 The above doors are shown as 50/50 door leaves configuration. Up to 2234 mm overall frame width these doors are also available as a 1/3 2/3 door configuration on Vertical Cedar and Horizontal Cedar doors. Prices are the same but please be aware panel configurations may be different from those shown above (1/3 2/3 is a term used to describe these doors but please note the 1/3 door leaf is always 800 mm wide with the 2/3 element varying to make the desired overall width). 1/3 leaf is always leading. 3 Not available in 70/30 configuration. Only Vertical Cedar and Horizontal Cedar Side Hinged doors are available in 70/30 configuration up to 7 0 wide. All doors come factory pre-framed, right hand door leaf leading as standard (viewed from the outside) with lever / lever handle set. Door stays are recommended in windy locations. 42

GARADOR Steel and Timber Side-hinged Doors Standard Sizes Timber door - standard sizes Nominal Door Size Overall frame size (between fix) 1 Chevron 3, 4 Ashton Ashton Cedar 3 Chevron 3, 4 Size Code 1810 x 1830 1930 x 1890 1752 1898 1993 6060 1964 x 1830 2084 x 1890 1752 1898 1993 6660 1964 x 1931 2084 x 1991 1752 1898 1993 6664 1964 x 1981 2084 x 2041 1758 1904 1998 6666 1964 x 2136 2084 x 2196 1780 1925 2022 6670 2114 x 1830 2234 x 1890 1780 1925 2022 7060 2114 x 1931 2234 x 1991 1796 1943 2038 7064 2114 x 1981 2234 x 2041 1819 1966 2060 7066 2114 x 2136 2234 x 2196 1830 1976 2072 7070 2239 x 1931 2359 x 1991 1892 2038 2132 7564 2239 x 1981 2359 x 2041 1904 2049 2146 7566 2239 x 2136 2359 x 2196 1943 2089 2184 7570 2264 x 1931 2384 x 1991 1898 2043 2140 7664 2264 x 1981 2384 x 2041 1925 2072 2167 7666 2264 x 2136 2384 x 2196 1966 2110 2208 7670 2419 x 1931 2539 x 1991 2089 2234 2331 8064 2419 x 1981 2539 x 2041 2100 2245 2342 8066 2419 x 2136 2539 x 2196 2162 2307 2403 8070 1 No fitting clearance allowed. 3 Not available in 70/30 configuration. Only Vertical Cedar and Horizontal Cedar Side Hinged doors are available in 70/30 configuration up to 7 0 wide. 4 On doors with windows, please state on order if plain or crystal panes. All doors come factory pre-framed, right hand door leaf leading as standard (viewed from the outside) with lever / lever handle set. Door stays are recommended in windy locations. 43

GARADOR Steel and Timber Side-hinged Doors Purpose-made Sizes Timber door - purpose-made sizes Overall frame size (between fix) 1 Vertical Cedar 2 Horizontal 3 Kingsbury 3 Seymour 3 Tudor Cedar 2 1930-2234 x 1890-2041 1660 1698 1852 1577 1577 1930-2234 x 2042-2196 1698 1736 1891 1616 1616 2235-2384 x 1890-2041 1736 1776 1930 1654 1654 2235-2384 x 2042-2196 1786 1825 2079 1704 1704 2385-2539 x 1890-2041 1891 1930 2189 1809 1809 2385-2539 x 2042-2196 1924 1963 2223 1842 1842 1 No fitting clearance allowed. 2 On doors with windows, please state on order if plain or crystal panes. Timber door - purpose-made sizes Overall frame size (between fix) 1 Chevron 3, 4 Ashton Ashton Cedar 3 Chevron 3, 4 1930-2234 x 1890-2041 1852 1996 2090 1930-2234 x 2042-2196 1891 2035 2128 2235-2384 x 1890-2041 1930 2073 2167 2235-2384 x 2042-2196 2079 2230 2327 2385-2539 x 1890-2041 2189 2340 2438 2385-2539 x 2042-2196 2223 2374 2473 1 No fitting clearance allowed. 2 The above doors are shown as 50/50 door leaves configuration. Up to 2234 mm overall frame width these doors are also available as a 1/3 2/3 door configuration on Vertical Cedar and Horizontal Cedar doors. Prices are the same but please be aware panel configurations may be different from those shown above (1/3 2/3 is a term used to describe these doors but please note the 1/3 door leaf is always 800 mm wide with the 2/3 element varying to make the desired overall width). 1/3 leaf is always leading. 3 Not available in 70/30 configuration. Only Vertical Cedar and Horizontal Cedar Side Hinged doors are available in 70/30 configuration up to 7 0 wide. 4 On doors with windows, please state on order if plain or crystal panes. All doors come factory pre-framed, right hand door leaf leading as standard (viewed from the outside) with lever / lever handle set. Door stays are recommended in windy locations. 44

GARADOR Steel and Timber Garage Side and Side Hinged Doors Options Options Garage side doors add Side-hinged doors add For powder-coated steel doors 1 : Terra Brown (RAL 8028) 23 30 For powder-coated steel doors 1 : Moss Green (RAL 6005), Ruby Red (RAL 3003), Signal Blue (RAL 5005), Jet Black (RAL 9005), Steel Blue (RAL 5011), Light Ivory (RAL 1015), Pigeon Blue (RAL 5014), Fir Green (RAL 6009), Pastel Green (RAL 6019), Anthracite Grey (RAL 7016), Stone Grey (RAL 7030), Light Grey (RAL 7035), Clay Brown (RAL 8003), Window Grey (RAL 7040), Rosewood (Solid) and Golden Oak (Solid) 78 103 Door stays (pair) - 59 Handles for steel and timber doors: knob/lever black plastic 23 23 For timber doors: factory fully finished in Light Oak, Antique Oak, Mahogany, Walnut, Chestnut and Ebony 74 115 Factory white primer ready for on-site painting 126 156 Factory fully finished painting (any RAL colour) 211 263 Anodised Aluminium lever/lever handles: white 96 96 Anodised Aluminium lever/lever handles: chrome effect 119 123 Left hand hinged 69 69 For steel door polywrapping (free of charge on colour doors) 20 20 1 Coloured Beaumont with windows doors are supplied with white or brown window frames as standard (for colour window frames see page 15). For timber side-hinged doors chassis is either white or brown regardless of exact colour of timber finishing, except when Ebony finishing is ordered and then the chassis will be supplied in black. 45

GARADOR Steel Panel Doors - Specifications Steel Panel Doors - Specifications Canopy Gear Specifications The canopy gear allows the door to travel in vertical tracks and is counterbalanced by an overhead torsion spring. The nominal drive through is 40 mm less than the opening width and 130 mm less than the opening height. In the open position, the door projects approximately one third of the door height, forming a canopy. A (Projection) 1240 mm 60 mm kick-up Height A 6'4" 633 6'6" 683 7'0" 838 For doors fitted with an operator, please respect operator specifications. On-site timber frame Behind brickwork fixing Between brickwork fixing Plan view Plan view Opening width 55 min. 55 min. Opening width 55 min. 55 min. Side view min. distance of headroom 1240 mm min. distance of headroom 1240 mm 55 mm min. 55 mm min. Side view Factory pre-framed with steel box frame The garage door is supplied factory fitted to a steel box section frame and is secured to the brickwork by using just 7 fixings. Behind brickwork fixing Between brickwork fixing 5 mm min. Plan view 5 mm min. Plan view 65* 55 Overall frame width 55 65* 55 55 Overall frame width Side view min. distance of headroom 1240 mm min. distance of headroom 1240 mm 60 mm Nominal door height * width of anchor brackets in this position 60 mm 10 mm required for kick-up Nominal door height Side view 46

GARADOR Steel Panel Doors - Specifications Single & Double Retractable Gear Specifications The retractable gear allows the door to be retracted inside the garage when open by means of horizontal overhead tracks supported by wall or ceiling mounted suspension brackets. This gear is available as an option for single doors and comes as standard with double garage doors. The nominal drive through clearance is 105 mm less than the opening width and 110 mm less than the opening height for single doors and 140 mm less than the opening height for double doors. A (Projection) Opening height 50 mm Height A 6'4" 910 6'6" 935 7'0" 1010 7'6" 1085 8'0" 1162.5 40 mm kick-up For doors fitted with an operator, please respect operator specifications. On-site timber frame Behind brickwork fixing Between brickwork fixing Plan view Plan view Opening width Opening width 70 min. 70 min. 70 min. 70 min. Side view Opening height 50 mm Side view Opening height 50 mm min. headroom required 70 mm 70 min. Factory pre-framed with steel box frame The garage door is supplied factory fitted to a steel box section frame and is secured to the brickwork by using just 7 fixings. Behind brickwork fixing Between brickwork fixing Plan view 5 mm min. 5 mm min. Plan view 65* 70 Overall frame width 70 65* 70 70 Overall frame width Side view Opening height 50 mm Opening height 50 mm 60 mm Nominal door height * width of anchor brackets in this position 60 mm Nominal door height Side view Retractable Plus Gear Door height Clear height below lifting arms For any door up to a width of 2744 mm in any of the three 7 0 1260 standard heights Retractable Plus Gear is available. 6 6 1105 This gear type creates clear drive through width at the crucial wing mirror height. 6 4 1055 47

GARADOR Steel Panel Doors - Specifications Garage Side Door & Side-hinged Door Specifications Door leaves supplied factory pre-framed ready for site installation. Fixed leaf (RH side when viewed from inside) fitted with tower bolts at top and bottom of inner leading edge. The floor will need to be finished and level for the bottom tower bolts to engage. Garage Side door factory pre-framed Behind brickwork fixing Between brickwork fixing 10 min. 60 60 10 min. 10 min. H H 60 60 60 60 Overall frame width Overall frame width Plan view Side view Plan view Side view The nominal clear passage clearance is 74 mm less than the opening width and 12 mm less than the opening height. Side-hinged door factory pre-framed Behind brickwork fixing Between brickwork fixing 10 min. 60 60 10 min. 10 min. H H 60 Overall frame width 60 60 Overall frame width 60 Plan view Side view Plan view Side view The nominal drive through clearance is 124 mm less than the opening width and 12 mm less than the opening height. 48

GARADOR Steel Panel Doors - Specifications Frame Dimensions for Panel Doors Internal frame size Pre-framed canopy door Pre-framed retractable door Frame kit for double door On-site timber frame overall frame sizes shown 1 overall frame sizes shown 1 overall frame sizes shown 1 Size Code 1984 x 1830 2094 x 1888 2124 x 1888 6660 1984 x 1905 2094 x 1964 2124 x 1964 6663 1984 x 1931 2094 x 1989 2124 x 1989 6664 1984 x 1981 2094 x 2039 2124 x 2039 6666 1984 x 2136 2094 x 2194 2124 x 2194 6670 2084 x 1931 2194 x 1989 2224 x 1989 61064 2084 x 1981 2194 x 2039 2224 x 2039 61066 2084 x 2136 2194 x 2194 2224 x 2194 61070 2134 x 1830 2244 x 1888 2274 x 1888 7060 2134 x 1905 2244 x 1963 2274 x 1963 7063 2134 x 1931 2244 x 1989 2274 x 1989 7064 2134 x 1981 2244 x 2039 2274 x 2039 7066 2134 x 2136 2244 x 2194 2274 x 2194 7070 2134 x 2286 2274 x 2344 7076 2170 x 1931 2280 x 1989 2310 x 1989 7164 2170 x 1981 2280 x 2039 2310 x 2039 7166 2170 x 2136 2280 x 2194 2310 x 2194 7170 2170 x 2286 2310 x 2344 7176 2224 x 1931 2334 x 1989 2364 x 1989 7364 2224 x 1981 2334 x 2039 2364 x 2039 7366 2224 x 2136 2334 x 2194 2364 x 2194 7370 2259 x 1931 2369 x 1989 2399 x 1989 7564 2259 x 1981 2369 x 2039 2399 x 2039 7566 2259 x 2136 2369 x 2194 2399 x 2194 7570 2259 x 2286 2399 x 2344 7576 2284 x 1931 2394 x 1989 2424 x 1989 7664 2284 x 1981 2394 x 2039 2424 x 2039 7666 2284 x 2136 2394 x 2194 2424 x 2194 7670 2284 x 2286 2424 x 2344 7676 2439 x 1931 2549 x 1989 2579 x 1989 8064 2439 x 1981 2549 x 2039 2579 x 2039 8066 2439 x 2136 2549 x 2194 2579 x 2194 8070 2439 x 2286 2579 x 2344 8076 2590 x 1981 2730 x 2039 8666 2590 x 2136 2730 x 2194 8670 2590 x 2286 2730 x 2344 8676 2744 x 1981 2884 x 2039 9066 2744 x 2136 2884 x 2194 9070 2744 x 2286 2884 x 2344 9076 3049 x 1981 3189 x 2039 1066 3049 x 2136 3189 x 2194 1070 3049 x 2286 3189 x 2344 1076 3354 x 1981 3494 x 2039 1166 3354 x 2136 3494 x 2194 1170 3354 x 2286 3494 x 2344 1176 3659 x 1981 3799 x 2039 1266 3659 x 2136 3799 x 2194 1270 3659 x 2286 3799 x 2344 1276 3964 x 1981 4104 x 2039 1366 3964 x 2136 4104 x 2194 1370 3964 x 2286 4104 x 2344 1376 4269 x 1981 4409 x 2039 1466 4269 x 2136 4409 x 2194 1470 4574 x 1981 4714 x 2039 1566 4574 x 2136 4714 x 2194 1570 4879 x 1981 5019 x 2039 1666 4879 x 2136 5019 x 2194 1670 1 No fitting clearance allowed. If door is fitted between the brickwork a minimum of 10 mm clearance over the width and 5 mm over the height should be added to the overall frame size when selecting the door. 49

GARADOR Steel Sectional Garage Doors Steel Sectional Garage Doors Door sections Made of galvanized steel. Available as Premium (42 mm thick insulated panel) and Classic (single skinned panel) versions. Premium doors are PU-foam insulated (100% CFC-free). Bottom door section comes with floor seal. Surface Outside: Woodgrain embossed, Sandgrain or Silkgrain textures with painted or foil coated finishes. Inside: pebble texture. Spring arrangement All doors up to 3049 mm wide come with tension springs as standard and torsion springs are available at extra cost. All doors over 3050 mm wide come with torsion springs as standard. Low headroom application available at extra cost. Side frames & Fascia Sectional doors are designed to be fitted behind the reveals and side frames are supplied white in colour. Cover profiles are available for use with coloured or foil coated door finishes. A single skin fascia is supplied with all doors which is finished in the same colour as the door sections. Colours Steel Woodgrain and Silkgrain doors can be ordered in almost any colour from the RAL colour chart. Standard colours are: - Light Ivory (RAL 1015) - Moss Green (RAL 6005) - Light Grey (RAL 7035) - Terra Brown (RAL 8028) - Ruby Red (RAL 3003) - Fir Green (RAL 6009) - Window Grey (RAL 7040) - Jet Black (RAL 9005) - Steel Blue (RAL 5011) - Anthracite Grey (RAL 7016) - Ochre Brown (RAL 8001) - White Aluminium (RAL 9006) - Pigeon Blue (RAL 5014) - Stone Grey (RAL 7030) - Clay Brown (RAL 8003) - Grey Aluminium (RAL 9007) Special RAL colours are: - Black Red (RAL 3007) - Black Grey (RAL 7021) - Signal Black (RAL 9004) - Traffic Black (RAL 9017) - Black Blue (RAL 5004) - Black Brown (RAL 8022) - Graphite Black (RAL 9011) Non standard RAL colours are: Based on full RAL colour chart excluding Traffic Purple (RAL 4006), Purple Violet (RAL 4007), Sapphire Blue (RAL 5003) and pearlescent or florescent options. Timber effect foil coated doors are available in the following five finishes: Golden Oak, Dark Oak, Night Oak, Rosewood and Winchester Oak. Foil coated finish also available in Titan Metallic (CH 703) Handle Sectional doors in shaded boxes are generally supplied ex-works for automatic operation, i.e. without handle hole and lock. Factory-fitted handle and lock are available with an increased lead-time. All other doors are on a 4-6 week lead time. For electrical operation of a garage with no other personal access, an emergency release kit must be fitted. Packaging Sectional doors are provided in a palleted format shrink wrapped for easy handling. Stock availability Popular sectional doors are generally ex-stock in Traffic White (RAL 9016) and Terra Brown (RAL 8028) in some sizes, other sizes and colour options require up to 6 weeks lead-time. Contact sales office for further details. Gears Tension spring Torsion spring Low headroom torsion spring fitting 50

GARADOR Steel Sectional Garage Doors Standard Sizes Window options Prices stated per window Georgian Standard Georgian Cross Georgian Diamond Georgian Sunrise Linear Standard XS Linear Standard 1 X Linear Cross 1 X Linear Standard 2 XL Standard colour - Add Non standard colour - Add Special RAL colour - Add Woodgrain Georgian Premium 91 106 96 106 - - - - 25 44 88 Classic 79 88 88 88 - - - - 25 44 88 Woodgrain, Sandgrain and Silkgrain Linear Premium - - - - 106 91 106 106 23 42 84 Classic - - - - 84 79 88 88 23 42 84 Timber effect 3 Premium 114 128 128 128 129 114 128 128 - - - 1 Linear Standard X and Cross X windows only available on Linear Medium and Linear Large Designs. 2 Linear Standard XL windows only available on Linear Large Designs 3 Window frames are painted in a colour to best match the colour of the foil coat. Georgian windows Doors up to 2070 mm wide have 3 windows, 2075 mm to 2740 mm wide have 4 windows, 2895 mm to 3353 mm wide have 5 windows, 3657 mm to 3962 mm wide have 6 windows, 4267 mm to 4725 mm have 7 windows and doors over 4877 mm wide have 8 windows (except Classic panels of 2080 mm wide which have 4 and then 2743 mm wide which have 5). Linear Standard XS Doors up to 2438 mm wide have 2 windows, 2591 mm to 3353 mm wide have 3 windows, 3657 mm to 4420 mm wide have 4 windows and doors over 4572 mm wide have 5 windows. Linear Standard X & Cross X Doors up to 2080 mm wide have 3 windows, 2134 mm to 2743 mm wide have 4 windows, 2895 mm to 3353 mm wide have 5 windows, 3657 mm to 3962 mm wide have 6 windows, 4267 mm to 4725 mm wide have 7 windows and doors of 4877 mm wide have 8 windows. Linear Standard XL Doors up to 2134 mm wide have 2 windows, 2286 mm to 2895 mm wide have 3 windows, 3048 mm to 3962 mm wide have 4 windows, 4267 mm to 4420 mm wide have 5 windows and doors over 4725 mm have 6 windows. Please state on order if clear or crystal panes. 51

GARADOR Steel Sectional Garage Doors Standard Sizes Woodgrain Timber effect Georgian design Brickwork opening Surcharge for Standard Colours Surcharge for Non-Std. Colours Surcharge for Special RAL Size Code Premium Classic Premium 2080 x 1875 1007 763 1317 154 212 424 61062 2080 x 2000 1053-1342 164 226 453 61066 2080 x 2080 1066 790-172 236 470 610610 2134 x 2000 1090 777 1342 169 232 464 7066 2134 x 2125 1105 790 1357 180 247 494 7070 2250 x 1875 1182 970 1525 165 227 453 7462 2250 x 2000 1216 988 1550 175 242 482 7466 2250 x 2125 1216 987 1548 186 256 512 7470 2286 x 2000 1090 777 1342 182 249 497 7666 2286 x 2125 1105 790 1357 192 265 528 7670 2286 x 2250 1104 823 1482 204 279 560 7674 2286 x 2375 1177 948 1515 214 295 591 7679 2286 x 2500 1174 946 1570 226 311 622 7682 2375 x 1875 1182 970 1525 173 239 478 7962 2375 x 2000 1183 971 1526 185 255 509 7966 2375 x 2125 1181 971 1525 196 271 541 7970 2375 x 2250 1238 1006 1574 208 287 573 7974 2438 x 2000 1150 804 1424 193 266 530 8066 2438 x 2125 1168 818 1444 205 281 563 8070 2438 x 2250 1162 856 1630 216 298 597 8074 2438 x 2375 1237 977 1652 229 315 630 8079 2438 x 2500 1235 975 1682 242 332 664 8082 2500 x 1875 1182 970 1525 183 252 503 8362 2500 x 2000 1183 971 1526 194 268 536 8366 2500 x 2125 1181 971 1525 207 285 569 8370 2500 x 2250 1238 1006 1574 219 301 603 8374 2500 x 2375 1297 1127 1649 231 318 636 8379 2500 x 2500 1297 1127 1650 244 335 670 8383 2500 x 2750 - - - - - - 8390 2591 x 2000 1150 804 1424 205 281 564 8666 2591 x 2125 1168 818 1444 217 299 600 8670 2625 x 2125 1282 1087 1814 217 299 597 8770 2740 x 2000 1250 932 1561 216 297 596 9066 2740 x 2125 1268 949 1589 230 317 634 9070 2750 x 2000 1433 1163 1790 214 295 589 9166 2750 x 2125 1461 1187 1814 228 313 626 9170 2750 x 2250 1517 1232 1894 240 332 664 9174 2750 x 2375 1527 1255 1933 254 351 700 9179 2750 x 2500 1578 1322 2013 268 369 737 9183 2750 x 2750 - - - - - - 9191 2896 x 2000 1311 980 1649 229 315 630 9666 2896 x 2125 1338 995 1677 244 335 670 9670 3000 x 2000 1507 1224 1866 233 321 643 91066 3000 x 2125 1506 1222 1866 248 342 684 91070 3000 x 2250 1553 1316 2063 315 362 723 91074 3000 x 2375 1579 1388 2106 277 382 763 91079 3000 x 2500 1578 1436 2187 292 402 803 91083 3000 x 3000 2126 1772 2806 350 482 964 910910 3048 x 2000 1260 980 1649 242 332 664 1066 3048 x 2125 1284 995 1677 256 352 706 1070 As standard with tension spring gear. Torsion spring fitting available for Premium doors at 70 surcharge. 52

GARADOR Steel Sectional Garage Doors Standard Sizes Woodgrain Timber effect Georgian design Brickwork opening Surcharge for Standard Colours Surcharge for Non-Std. Colours Surcharge for Special RAL Size Code Premium Classic Premium 3250 x 2000 1565-2179 253 349 696 10866 3250 x 2125 1605-2191 269 371 740 10870 3250 x 2250 1660-2212 285 392 783 10874 3353 x 2000 1502-1959 266 364 730 1166 3353 x 2125 1529-1992 281 387 776 1170 3500 x 2000 1705-2343 272 375 750 11666 3500 x 2125 1749-2399 290 399 797 11670 3500 x 2250 1805-2465 307 422 844 11674 3658 x 2000 1770-2216 289 398 796 1266 3658 x 2125 1800-2252 308 422 846 1270 3750 x 2000 1840-2546 292 402 803 12466 3750 x 2125 1890-2575 310 427 854 12470 3750 x 2250 1950-2638 329 453 904 12474 3962 x 2000 1841-2287 314 431 862 1366 3962 x 2125 1866-2321 333 458 917 1370 4000 x 2000 1971-2565 311 428 857 13266 4000 x 2125 2023-2612 331 456 910 13270 4000 x 2250 2087-2768 350 482 964 13274 4250 x 2000 2033-2678 331 456 910 131166 4250 x 2125 2090-2747 352 484 968 131170 4250 x 2250 2157-2819 372 512 1025 131174 4267 x 2000 1913-2357 337 464 928 1466 4267 x 2125 1944-2395 358 492 987 1470 4420 x 2000 1983-2420 350 481 962 14666 4420 x 2125 2015-2460 372 511 1022 14670 4500 x 2000 2090-2728 350 482 964 14966 4500 x 2125 2150-2793 372 512 1025 14970 4500 x 2250 2221-2879 394 543 1085 14974 4572 x 2000 2018-2451 361 497 995 1566 4572 x 2125 2053-2485 384 528 1057 1570 4725 x 2000 2118-2496 374 515 1028 15666 4725 x 2125 2150-2535 397 546 1092 15670 4750 x 2000 2154-2786 370 509 1017 15766 4750 x 2125 2216-2844 393 541 1082 15770 4750 x 2250 2284-2907 416 573 1146 15774 4877 x 2000 2118-2544 385 530 1062 1666 4877 x 2125 2150-2584 410 564 1128 1670 5000 x 2000 2395-2838 389 536 1071 16566 5000 x 2125 2498-2894 414 569 1138 16570 5000 x 2250 2643-3132 438 603 1205 16574 As standard with torsion spring gear. Low headroom fitting available at 105 surcharge. Purpose-made sizes available upon request. Non standard colours also available upon request. Doors supplied without locking as standard (see options on page 60 for handles). For window options please see page 51. 53

GARADOR Steel Sectional Garage Doors Standard Sizes Woodgrain Linear small design Brickwork opening Surcharge for Standard Colours Surcharge for Non-Std. Colours Surcharge for Special RAL Size Code Premium Classic 1 2080 x 1875 802 680 154 212 424 61062 2080 x 2000 837-164 226 453 61066 2080 x 2080 868 712 172 236 470 610610 2134 x 2000 865 693 169 232 464 7066 2134 x 2125 896 712 180 247 494 7070 2250 x 1875 967 835 165 227 453 7462 2250 x 2000 996 851 175 242 482 7466 2250 x 2125 996 849 186 256 512 7470 2286 x 2000 865 693 182 249 497 7666 2286 x 2125 896 712 192 265 528 7670 2286 x 2250 909 751 204 279 560 7674 2286 x 2375 979 866 214 295 591 7679 2286 x 2500 977 865 226 311 622 7682 2375 x 1875 967 835 173 239 478 7962 2375 x 2000 968 835 185 255 509 7966 2375 x 2125 968 835 196 271 541 7970 2375 x 2250 988 872 208 287 573 7974 2438 x 2000 910 721 193 266 530 8066 2438 x 2125 944 748 205 281 563 8070 2438 x 2250 951 786 216 298 597 8074 2438 x 2375 1024 902 229 315 630 8079 2438 x 2500 1021 901 242 332 664 8082 2500 x 1875 967 835 183 252 503 8362 2500 x 2000 968 835 194 268 536 8366 2500 x 2125 968 835 207 285 569 8370 2500 x 2250 988 872 219 301 603 8374 2500 x 2375 1041 984 231 318 636 8379 2500 x 2500 1042 984 244 335 670 8383 2500 x 2750 - - - - - 8390 2591 x 2000 910 721 205 281 564 8666 2591 x 2125 944 748 217 299 600 8670 2625 x 2125 1097 954 217 299 597 8770 2740 x 2000 985 813 216 297 596 9066 2740 x 2125 1017 838 230 317 634 9070 2750 x 2000 1112 952 214 295 589 9166 2750 x 2125 1147 979 228 313 626 9170 2750 x 2250 1154 1024 240 332 664 9174 2750 x 2375 1182 1065 254 351 700 9179 2750 x 2500 1238 1107 268 369 737 9183 2750 x 2750 - - - - - 9191 2896 x 2000 1029 840 229 315 630 9666 2896 x 2125 1068 872 244 335 670 9670 3000 x 2000 1248 1070 233 321 643 91066 3000 x 2125 1246 1067 248 342 684 91070 3000 x 2250 1259 1124 315 362 723 91074 3000 x 2375 1290 1141 277 382 763 91079 3000 x 2500 1345 1204 292 402 803 91083 3000 x 3000 1637 1609 350 482 964 910910 3048 x 2000 993 840 242 332 664 1066 3048 x 2125 1028 872 256 352 706 1070 As standard with tension spring gear. Torsion spring fitting available for Premium doors at 70 surcharge. 54

GARADOR Steel Sectional Garage Doors Standard Sizes Woodgrain Linear small design Brickwork opening Surcharge for Standard Colours Surcharge for Non-Std. Colours Surcharge for Special RAL Size Code Premium Classic 1 3250 x 2000 1258 1176 253 349 696 10866 3250 x 2125 1293 1199 269 371 740 10870 3250 x 2250 1322 1231 285 392 783 10874 3353 x 2000 1171 1173 266 364 730 1166 3353 x 2125 1216 1215 281 387 776 1170 3500 x 2000 1343 1276 272 375 750 11666 3500 x 2125 1374 1300 290 399 797 11670 3500 x 2250 1407 1325 307 422 844 11674 3658 x 2000 1373 1296 289 398 796 1266 3658 x 2125 1424 1350 308 422 846 1270 3750 x 2000 1418 1365 292 402 803 12466 3750 x 2125 1457 1390 310 427 854 12470 3750 x 2250 1489 1418 329 453 904 12474 3962 x 2000 1423 1325 314 431 862 1366 3962 x 2125 1476 1378 333 458 917 1370 4000 x 2000 1494 1453 311 428 857 13266 4000 x 2125 1537 1477 331 456 910 13270 4000 x 2250 1572 1507 350 482 964 13274 4250 x 2000 1577 1526 331 456 910 131166 4250 x 2125 1623 1552 352 484 968 131170 4250 x 2250 1660 1580 372 512 1025 131174 4267 x 2000 1475 1436 337 464 928 1466 4267 x 2125 1533 1512 358 492 987 1470 4420 x 2000 1524 1468 350 481 962 14666 4420 x 2125 1586 1546 372 511 1022 14670 4500 x 2000 1659 1638 350 482 964 14966 4500 x 2125 1708 1666 372 512 1025 14970 4500 x 2250 1743 1695 394 543 1085 14974 4572 x 2000 1551 1475 361 497 995 1566 4572 x 2125 1612 1552 384 528 1057 1570 4725 x 2000 1619 1520 374 515 1028 15666 4725 x 2125 1681 1597 397 546 1092 15670 4750 x 2000 1710 1697 370 509 1017 15766 4750 x 2125 1760 1721 393 541 1082 15770 4750 x 2250 1834 1751 416 573 1146 15774 4877 x 2000 1619 1518 385 530 1062 1666 4877 x 2125 1681 1597 410 564 1128 1670 5000 x 2000 1760 1747 389 536 1071 16566 5000 x 2125 1935 1770 414 569 1138 16570 5000 x 2250 1986 1799 438 603 1205 16574 1 Only Linear Standard XS windows available. As standard with torsion spring gear. Low headroom fitting available at 105 surcharge. Purpose-made sizes available upon request. Non standard colours also available upon request. Doors supplied without locking as standard (see options on page 60 for handles). For window options please see page 51. 55

GARADOR Steel Sectional Garage Doors Standard Sizes Linear medium design Woodgrain Sandgrain 1 Silkgrain Timber Effect / Titan (CH 703) 56 Brickwork opening Premium Classic 2 Premium Premium Premium Surcharge for Standard Colours Surcharge for Non-Std. Colours Surcharge for Special RAL Anthr. Grey, Traffic White Terra Brown, White Alum. 2080 x 1875 802 680 875 981 981 1076 154 212 424 61062 2080 x 2000 837-916 1025 1025 1126 164 226 453 61066 2080 x 2080 868 712 950 1065 1064 1170 172 236 470 610610 2134 x 2000 865 693 916 1025 1025 1126 169 232 464 7066 2134 x 2125 896 712 950 1065 1064 1170 180 247 494 7070 2250 x 1875 967 835 1020 1306 1181 1306 165 227 453 7462 2250 x 2000 996 851 1040 1328 1203 1328 175 242 482 7466 2250 x 2125 996 849 1042 1328 1203 1328 186 256 512 7470 2286 x 2000 865 693 916 1025 1025 1126 182 249 497 7666 2286 x 2125 896 712 950 1065 1064 1170 192 265 528 7670 2286 x 2250 909 751 996 1117 1116 1226 204 279 560 7674 2286 x 2375 979 866 1038 1162 1163 1279 214 295 591 7679 2286 x 2500 977 865 1078 1209 1209 1330 226 311 622 7682 2375 x 1875 967 835 1020 1306 1181 1306 173 239 478 7962 2375 x 2000 968 835 1025 1308 1185 1308 185 255 509 7966 2375 x 2080 968 - - - - - 203 265 529 79661 2375 x 2125 968 835 1026 1305 1183 1305 196 271 541 7970 2375 x 2250 988 872 1067 1359 1232 1359 208 287 573 7974 2438 x 2000 910 721 965 1082 1084 1194 193 266 530 8066 2438 x 2125 944 748 1007 1129 1131 1245 205 281 563 8070 2438 x 2250 951 786 1041 1164 1166 1283 216 298 597 8074 2438 x 2375 1024 902 1086 1217 1219 1342 229 315 630 8079 2438 x 2500 1021 901 1133 1269 1274 1404 242 332 664 8082 2500 x 1875 967 835 1020 1306 1181 1306 183 252 503 8362 2500 x 2000 968 835 1025 1308 1185 1308 194 268 536 8366 2500 x 2080 968 - - - - - 203 279 558 83661 2500 x 2125 968 835 1026 1305 1183 1305 207 285 569 8370 2500 x 2250 988 872 1067 1359 1232 1359 219 301 603 8374 2500 x 2375 1041 984 1131 1444 1308 1444 231 318 636 8379 2500 x 2500 1042 984 1132 1444 1308 1444 244 335 670 8383 2500 x 2750 - - - - - - - - - 8390 2591 x 2000 910 721 965 1082 1084 1194 205 281 564 8666 2591 x 2125 944 748 1007 1129 1131 1245 217 299 600 8670 2625 x 2125 1097 954 1168 1503 1358 1503 217 299 597 8770 2740 x 2000 985 813 1054 1181 1188 1310 216 297 596 9066 2740 x 2125 1017 838 1095 1227 1235 1362 230 317 634 9070 2750 x 2000 1112 952 1149 1478 1336 1478 214 295 589 9166 2750 x 2125 1147 979 1195 1538 1389 1538 228 313 626 9170 2750 x 2250 1154 1024 1222 1573 1421 1573 240 332 664 9174 2750 x 2375 1182 1065 1262 1623 1466 1623 254 351 700 9179 2750 x 2500 1238 1107 1319 1699 1533 1699 268 369 737 9183 2750 x 2750 - - - - - - - - - 9191 2896 x 2000 1029 840 1109 1242 1251 1382 229 315 630 9666 2896 x 2125 1068 872 1152 1290 1299 1437 244 335 670 9670 3000 x 2000 1248 1070 1306 1694 1526 1694 233 321 643 91066 3000 x 2125 1246 1067 1305 1692 1524 1692 248 342 684 91070 3000 x 2250 1259 1124 1321 1708 1540 1708 315 362 723 91074 3000 x 2375 1290 1141 1379 1784 1608 1784 277 382 763 91079 3000 x 2500 1345 1204 1439 1864 1680 1864 292 402 803 91083 3000 x 3000 1637 1609 1742 2265 2038 2265 350 482 964 910910 3048 x 2000 993 840 1109 1242 1251 1382 242 332 664 1066 3048 x 2125 1028 872 1152 1290 1299 1437 256 352 706 1070 Size Code As standard with tension spring gear. Torsion spring fitting available for Premium doors at 70 surcharge.

GARADOR Steel Sectional Garage Doors Standard Sizes Linear medium design Woodgrain Sandgrain 1 Silkgrain Timber Effect / Titan (CH 703) Brickwork opening Premium Classic 2 Premium Premium Premium Surcharge for Standard Colours Surcharge for Non-Std. Colours Surcharge for Special RAL Anthr. Grey, Traffic White Terra Brown, White Alum. 3250 x 2000 1258-1380 1797 1616 1797 253 349 696 10866 3250 x 2125 1293-1418 1845 1659 1845 269 371 740 10870 3250 x 2250 1322-1461 1901 1709 1901 285 392 783 10874 3353 x 2000 1171-1316 1473 1491 1656 266 364 730 1166 3353 x 2125 1216-1365 1530 1550 1720 281 387 776 1170 3500 x 2000 1343-1465 1913 1719 1913 272 375 750 11666 3500 x 2125 1374-1505 1964 1764 1964 290 399 797 11670 3500 x 2250 1407-1551 2023 1819 2023 307 422 844 11674 3658 x 2000 1373-1478 1657 1682 1871 289 398 796 1266 3658 x 2125 1424-1536 1721 1748 1945 308 422 846 1270 3750 x 2000 1418-1498 1958 1759 1958 292 402 803 12466 3750 x 2125 1457-1545 2020 1814 2020 310 427 854 12470 3750 x 2250 1489-1593 2082 1870 2082 329 453 904 12474 3962 x 2000 1423-1521 1705 1733 1928 314 431 862 1366 3962 x 2125 1476-1578 1768 1798 2001 333 458 917 1370 4000 x 2000 1494-1574 2062 1850 2062 311 428 857 13266 4000 x 2125 1537-1613 2113 1896 2113 331 456 910 13270 4000 x 2250 1572-1670 2185 1961 2185 350 482 964 13274 4250 x 2000 1577-1639 2151 1930 2151 331 456 910 131166 4250 x 2125 1623-1689 2218 1989 2218 352 484 968 131170 4250 x 2250 1660-1740 2284 2048 2284 372 512 1025 131174 4267 x 2000 1475-1565 1754 1784 1987 337 464 928 1466 4267 x 2125 1533-1628 1824 1855 2066 358 492 987 1470 4420 x 2000 1524-1603 1797 1829 2038 350 481 962 14666 4420 x 2125 1586-1670 1870 1905 2121 372 511 1022 14670 4500 x 2000 1659-1721 2265 2029 2265 350 482 964 14966 4500 x 2125 1708-1776 2335 2092 2335 372 512 1025 14970 4500 x 2250 1743-1817 2389 2141 2389 394 543 1085 14974 4572 x 2000 1551-1617 1811 1845 2056 361 497 995 1566 4572 x 2125 1612-1683 1886 1922 2141 384 528 1057 1570 4725 x 2000 1619-1645 1844 1878 2094 374 515 1028 15666 4725 x 2125 1681-1712 1917 1953 2178 397 546 1092 15670 4750 x 2000 1710-1757 2313 2072 2313 370 509 1017 15766 4750 x 2125 1760-1812 2387 2138 2387 393 541 1082 15770 4750 x 2250 1794-1867 2458 2202 2458 416 573 1146 15774 4877 x 2000 1619-1675 1876 1912 2132 385 530 1062 1666 4877 x 2125 1681-1740 1949 1988 2216 410 564 1128 1670 5000 x 2000 1760-1824 2406 2325 2406 389 536 1071 16566 5000 x 2125 1797-1871 2469 2387 2469 414 569 1138 16570 5000 x 2250 1834-1923 2534 2451 2534 438 603 1205 16574 1 Sandgrain surface available in Traffic White (RAL 9016), Terra Brown (RAL 8028), Anthracite Grey (RAL 7016) and White Aluminium (RAL 9006). 2 Only Linear Standard XS windows available. Size Code As standard with torsion spring gear. Low headroom fitting available at 105 surcharge. Purpose-made sizes available upon request. Non standard colours also available upon request. Doors supplied without locking as standard (see options on page 60 for handles). For window options please see page 51. 57

GARADOR Steel Sectional Garage Doors Standard Sizes Linear large design Sandgrain 1 Silkgrain Timber Effect / Titan (CH 703) Brickwork opening Premium Premium Premium Surcharge for Standard Colours Surcharge for Non-Std. Colours Surcharge for Special RAL Size Code Anthr. Grey, Traffic White Terra Brown, White Alum. 2080 x 1875 1038 1162 1119 1227 154 212 424 61062 2080 x 2000 1065 1193 1148 1258 164 226 453 61066 2080 x 2080 1077 1208 1161 1273 172 236 470 610610 2134 x 2000 1065 1193 1148 1258 169 232 464 7066 2134 x 2125 1077 1208 1161 1273 180 247 494 7070 2250 x 1875 1149 1314 1279 1407 165 227 453 7462 2250 x 2000 1171 1346 1302 1431 175 242 482 7466 2250 x 2125 1172 1358 1302 1431 186 256 512 7470 2286 x 2000 1065 1193 1148 1258 182 249 497 7666 2286 x 2125 1077 1208 1161 1273 192 265 528 7670 2286 x 2250 1127 1262 1214 1329 204 279 560 7674 2286 x 2375 1131 1267 1218 1334 214 295 591 7679 2286 x 2500 1160 1301 1250 1368 226 311 622 7682 2375 x 2125 1149 1322 1279 1407 173 239 478 7962 2375 x 2000 1154 1339 1282 1409 185 255 509 7966 2375 x 2125 1155 1351 1282 1409 196 271 541 7970 2375 x 2250 1193 1401 1323 1453 208 287 573 7974 2438 x 2000 1124 1259 1212 1330 193 266 530 8066 2438 x 2125 1143 1281 1236 1355 205 281 563 8070 2438 x 2250 1202 1347 1297 1424 216 298 597 8074 2438 x 2375 1232 1381 1329 1458 229 315 630 8079 2438 x 2500 1267 1420 1366 1499 242 332 664 8082 2500 x 1875 1149 1331 1279 1407 183 252 503 8362 2500 x 2000 1154 1348 1282 1409 194 268 536 8366 2500 x 2125 1155 1362 1282 1409 207 285 569 8370 2500 x 2250 1193 1412 1323 1453 219 301 603 8374 2500 x 2375 1247 1478 1385 1523 231 318 636 8379 2500 x 2500 1250 1493 1387 1524 244 335 670 8383 2500 x 2750 - - - - - - - 8390 2591 x 2000 1124 1259 1212 1330 205 281 564 8666 2591 x 2125 1143 1281 1236 1355 217 299 600 8670 2625 x 2125 1329 1547 1481 1632 217 299 597 8770 2740 x 2000 1233 1382 1332 1466 216 297 596 9066 2740 x 2125 1250 1400 1349 1484 230 317 634 9070 2750 x 2000 1341 1555 1496 1651 214 295 589 9166 2750 x 2125 1369 1597 1526 1683 228 313 626 9170 2750 x 2250 1442 1682 1608 1773 240 332 664 9174 2750 x 2375 1471 1725 1640 1809 254 351 700 9179 2750 x 2500 1506 1773 1681 1854 268 369 737 9183 2750 x 2750 - - - - - - - 9191 2896 x 2000 1297 1453 1404 1547 229 315 630 9666 2896 x 2125 1318 1476 1425 1570 244 335 670 9670 3000 x 2000 1401 1634 1563 1726 233 321 643 91066 3000 x 2125 1401 1649 1561 1723 248 342 684 91070 3000 x 2250 1456 1719 1625 1793 315 362 723 91074 3000 x 2375 1525 1802 1703 1880 277 382 763 91079 3000 x 2500 1549 1841 1728 1907 292 402 803 91083 3000 x 3000 2094 2094 2347 2598 350 482 964 910910 3048 x 2000 1297 1453 1404 1547 242 332 664 1066 3048 x 2125 1318 1476 1425 1570 256 352 706 1070 As standard with tension spring gear. Torsion spring fitting available for Premium doors at 70 surcharge. 58

GARADOR Steel Sectional Garage Doors Options Linear large design Sandgrain 1 Silkgrain Timber Effect / Titan (CH 703) Brickwork opening Premium Premium Premium Surcharge for Standard Colours Surcharge for Non-Std. Colours Surcharge for Special RAL Size Code Anthr. Grey, Traffic White Terra Brown, White Alum. 3250 x 2000 1398 1856 1794 1987 253 349 696 10866 3250 x 2125 1436 1896 1822 2016 269 371 740 10870 3250 x 2250 1468 1946 1860 2057 285 392 783 10874 3353 x 2000 1537 1722 1668 1845 266 364 730 1166 3353 x 2125 1560 1748 1694 1871 281 387 776 1170 3500 x 2000 1494 1911 1838 2034 272 375 750 11666 3500 x 2125 1530 1959 1871 2071 290 399 797 11670 3500 x 2250 1566 2006 1903 2104 307 422 844 11674 3658 x 2000 1733 1940 1884 2086 289 398 796 1266 3658 x 2125 1763 1976 1918 2124 308 422 846 1270 3750 x 2000 1580 1960 1870 2071 292 402 803 12466 3750 x 2125 1623 1990 1883 2084 310 427 854 12470 3750 x 2250 1659 2051 1929 2135 329 453 904 12474 3962 x 2000 1787 2001 1945 2155 314 431 862 1366 3962 x 2125 1812 2030 1972 2184 333 458 917 1370 4000 x 2000 1667 2104 2013 2231 311 428 857 13266 4000 x 2125 1716 2170 2064 2289 331 456 910 13270 4000 x 2250 1752 2233 2115 2344 350 482 964 13274 4250 x 2000 1761 2230 2134 2368 331 456 910 131166 4250 x 2125 1813 2288 2175 2413 352 484 968 131170 4250 x 2250 1853 2347 2219 2461 372 512 1025 131174 4267 x 2000 1841 2061 2003 2220 337 464 928 1466 4267 x 2125 1870 2095 2036 2256 358 492 987 1470 4420 x 2000 1891 2119 2059 2283 350 481 962 14666 4420 x 2125 1920 2150 2091 2318 372 511 1022 14670 4500 x 2000 1854 2285 2175 2414 350 482 964 14966 4500 x 2125 1910 2367 2244 2491 372 512 1025 14970 4500 x 2250 1949 2438 2297 2549 394 543 1085 14974 4572 x 2000 1911 2140 2081 2308 361 497 995 1566 4572 x 2125 1940 2175 2115 2345 384 528 1057 1570 4725 x 2000 1946 2180 2120 2351 374 515 1028 15666 4725 x 2125 1979 2217 2155 2391 397 546 1092 15670 4750 x 2000 1913 2387 2269 2520 370 509 1017 15766 4750 x 2125 1969 2457 2323 2580 393 541 1082 15770 4750 x 2250 2007 2531 2378 2641 416 573 1146 15774 4877 x 2000 1979 2217 2157 2393 385 530 1062 1666 4877 x 2125 2014 2256 2196 2436 410 564 1128 1670 5000 x 2000 1970 2484 2358 2621 389 536 1071 16566 5000 x 2125 2011 2552 2408 2674 414 569 1138 16570 5000 x 2250 2052 2627 2464 2737 438 603 1205 16574 1 Sandgrain surface available in Traffic White (RAL 9016), Terra Brown (RAL 8028), Anthracite Grey (RAL 7016) and White Aluminium (RAL 9006). As standard with torsion spring gear. Low headroom fitting available at 105 surcharge. Purpose-made sizes available upon request. Doors supplied without locking as standard (see options on page 60 for handles). For window options please see page 51. 59

GARADOR Steel Sectional Garage Doors Options Options for sectional doors add Special anchor set (required if you fix the door between brickwork and fasten the frame on the side). If using special anchor set 90 mm cover profiles will be required to cover fixing holes. 42 Please note: Frame legs for brown and any coloured doors come in white as standard, matching cover profiles are available. Silkgrain, Foil Coated Timber Effect and Titan Metallic (CH 703) are available exstock. Please however note Colours and RAL to choose must be ordered with the door and cannot be ordered as a spare part at a later time. Cover Profiles Woodgrain White Colour RAL to choose Foil Coated Timber Effect / Sandgrain/ Silkgrain Woodgrain Sandgrain/ Silkgrain Woodgrain Silkgrain Titan (CH 703) Door height 55 90 55 90 55 90 55 90 55 90 55 90 55 90 1875-2000 47 62 51 68 60 88 64 92 82 125 88 134 72 101 2001-2125 50 65 54 72 63 93 68 97 86 133 93 142 76 107 2126-2250 53 69 57 76 67 99 71 104 91 141 99 150 82 114 2251-2375 55 72 60 81 70 104 75 110 96 148 104 158 86 120 2376-2500 58 76 63 85 73 110 80 115 101 155 110 166 90 125 ThermoFrame set ThermoFrame set 1 ThermoFrame set 2 ThermoFrame set 3 Door height up to 3000 mm (length 3210 mm) Door width up to 3250 mm (length 3250 mm) per set 210 Door height up to 3000 mm (length 3210 mm) Door width from 3250 mm up to 6000 mm (length 6000 mm) per set 249 For doors with track application H (length 6000 mm) (length 5500 mm) per set 249 Set consists of Lintel seal (1x) with 2 lip seals Plastic angle profiles (2x) black, 84 x 22.5 mm with lip seal (frame covering may be required to match the colours) 66 Purpose-made width cut-down service (check for size limitations). Cut-down service not available on Classic Doors. 89 Purpose-made height cut-down service (check for size limitations). Cut-down service not available on Classic doors. 110 Classic black handle set and lock for on-site installation 51 White finish cast aluminium handle set and lock for on-site installation 126 Silver finish cast aluminium handle set and lock for on-site installation 126 Chrome effect stainless steel handle set and lock for on-site installation 147 Brushed chrome effect stainless steel handle set and lock for on site installation 169 Factory-fitted handle and lock available with a 2 week increase in lead-time (complete with classic black handle as standard) 76 Standard headroom torsion spring for sectional door less than 3050 mm wide 70 Low headroom tracks arrangement for torsion spring door over 3050 mm wide (when purchased with door) 105 60

GARADOR Steel Sectional Garage Doors Specifications Sectional doors up to 3050 mm wide and/or 2625 mm high: These doors come with tension spring fitting. With doors from the Premium range the tension springs can be replaced by torsion springs as an option. Tension springs are suitable for low headroom installations. For a low headroom installation with torsion springs please order low headroom track set separately (changing to a low headroom option is not available as a retrofit). Sectional garage door with tension spring fitting Minimum garage dimensions for manually operated doors Headroom: Sideroom: 100 mm 90 mm (each side) min. depth into garage = opening height + 510 opening height + 470 1000 Depth into garage: garage door height + 510 mm Clear passage height for manually operated doors: garage door height 80 mm Minimum garage dimensions for doors with GaraMatic operator Headroom Sideroom: Depth into garage: Clear passage height for doors with GaraMatic operator: 115 mm 90 mm (each side) for doors up to 2125 mm high: 3200 mm for doors up to 2500 mm high: 3450 mm for doors up to 3000 mm high: 4125 mm garage door height 30 mm min. ceiling height = opening height + 100 opening height clear drive through height 490 155 opening height 400 Side view INSIDE FFL opening height 65 clear drive through width 155 125 min. 90 INSIDE min. garage inside dimension Plan view min. 90 61

GARADOR Steel Sectional Garage Doors Specifications Sectional doors wider than 3050 mm wide and/or 2625 mm high: These doors come with torsion springs as standard. For a low headroom installation with torsion springs please order low headroom track pack (changing to a low headroom option is not available as a retrofit). Sectional garage door with torsion spring fitting Minimum garage dimensions for manually operated doors min. depth into garage = opening height + 510 opening height + 470 Headroom: 210 mm 1000 Sideroom: 90 mm (each side) Depth into garage: garage door height + 510 mm Clear passage height for manually operated doors: garage door height 50 mm Minimum garage dimensions for doors with GaraMatic operator Headroom: Sideroom: Depth into garage: 210 mm 90 mm (each side) for doors up to 2125 mm high: 3200 mm for doors up to 2500 mm high: 3450 mm for doors up to 3000 mm high: 4125 mm min. ceiling height = opening height + 210 opening height + 155 opening height clear drive through height 490 155 opening height 285 INSIDE FFL opening height + 45 Clear passage height for doors with GaraMatic operator: full garage door height Side view clear drive through width 155 125 min. 90 INSIDE min. garage inside dimension Plan view min. 90 62

GARADOR Steel Sectional Garage Doors Specifications Sectional doors wider than 3050 mm wide and/or 2625 mm high: These doors come with torsion springs as standard. For a low headroom installation with torsion springs please order low headroom track pack (changing to a low headroom option is not available as a retrofit). Sectional garage door with low headroom torsion spring fitting Minimum garage dimensions for manually operated doors min. depth into garage = opening height + 750 Headroom: Sideroom: 100 mm 90 mm (each side) 1000 opening height + 670 opening height + 550 Depth into garage: garage door height + 510 mm Clear passage height for manually operated doors: garage door height 100 mm Minimum garage dimensions for doors with GaraMatic operator Headroom: Sideroom: Depth into garage: 115 mm 90 mm (each side) for doors up to 2125 mm high: 3200 mm for doors up to 3000 mm high: 4125 mm min. ceiling height = opening height + 100 opening height clear drive through height 490 155 opening height 400 FFL INSIDE opening height 65 Clear passage height for doors with GaraMatic operator: for doors up to 3000 mm wide: garage door height 30 mm for doors wider than 3000 mm: garage door height 80 mm Side view clear drive through width 155 125 min. 90 INSIDE min. garage inside dimension Plan view min. 90 63

GARADOR Automation and Accessories Automation and Accessories Operators GaraMatic operators are an ideal match for all current Garador up & over and sectional doors. As a tried and tested unit hardware on both the door and the operator are perfectly matched and prepared for easy installation. Safety in compliance with the latest European standards Security integral anti-burglar device Convenience super-smooth and maintenance-free All operators come as a complete set as standard, including operator head, operator rail and two hand transmitters (one 4-channel hand transmitter and one 4-channel micro hand transmitter with GaraMatic 10 and 20 operator units. Two 4-channel micro hand transmitters are supplied with the GaraMatic 9). All operators perfectly match all current standard Garador up-and-over and sectional garage doors. BS 13241 Compliant The combination of Garador garage doors with GaraMatic operators complies with the latest European safety standards. Operators GaraMatic 9 GaraMatic 10 GaraMatic 20 Peak forces 750 N Peak forces 800 N Peak forces 1000 N Simple to operate Soft start and soft stop Automatic safety reversal Integral light Streamlined plastic cover Partial open function 50% faster than other operators Half-open function for ventilation Adjustable soft start and soft stop Automatic safety reversal Adjustable integral halogen light Self-closing timer option (light beam device required) 50% faster than other operators Half-open function for ventilation Adjustable soft start and soft stop Automatic safety reversal Adjustable integral halogen light Self-closing timer option (light beam device required) Complete with Light Beam Device as standard Canopy Doors 1 471 546 617 Standard short boom 2 Retractable and Sectional Doors up to 2125 mm high 374 449 520 Medium boom 2 391 467 537 Long boom 2 481 556 627 1 Canopy door price includes bow arm system. GaraMatic 9 supplied with two 2-channel hand transmitters. 2 For exact boom requirements see grid on page 69. Supplied with two hand transmitters as standard. 64

GARADOR Automation and Accessories Accessories Article Hand transmitter 5-channel (Bi-directional) in matt black Hand transmitter 4-channel (Bi-directional) in matt black Hand transmitter 5-channel (Bi-directional) in white Hand transmitter 2-channel (Bi-directional) in white Reference No. 7471 7470 6713 6711 Price 68 54 74 59 Accessories Article Hand transmitter 1-channel (Bi-directional) in black Hand transmitter 4-channel (Bi-directional) in black Hand transmitter station in black Hand transmitter station in white Reference No. 6710 6779 6719 6720 Price 54 56 11 11 Accessories Article Hand transmitter sun visor/ wall holder 1-channel (Bi-directional) transmitter for car cigarette lighter 2-channel (Bi-directional) transmitter for car cigarette lighter 4-channel (Bi-directional) key ring transmitter Reference No. 6784 6782 6783 6795 Price 9 51 51 62 65

GARADOR Automation and Accessories Accessories Article Hand transmitter 2-channel (Bi-directional) Burl wood Hand transmitter 2-channel (Bi-directional) Aluminium Hand transmitter 2-channel (Bi-directional) Carbon Hand transmitter 4-channel (Bi-directional) in matt black Reference No. 6968 6967 6966 6712 Price 73 73 73 56 Accessories Article Hand transmitter 2-channel (Bi-directional) Green Hand transmitter 2-channel (Bi-directional) Red Aluminium designer 2-channel transmitter 868 mhz Chrome designer 2-channel transmitter 868 mhz Reference No. 6965 6964 4879 4880 Price 73 73 76 76 Accessories Article IT3B Wired wall console FIT2 Bi-directional wireless wall console IT1B Wired illuminated push button FCT3 Bi-directional wireless code switch Reference No. 2873 6718 2875 6717 Price 36 56 26 91 66

GARADOR Automation and Accessories Accessories Article FCT10 Bi-directional wireless code switch (slide lid) FFL12 Bi-directional wireless finger scan (scan lid) IT1 Wired push button Reference No. 6716 6796 695 Price 149 193 16 Accessories Article ESA40 Face fixed key switch ESU40 Recessed key switch EL101 Internal light beam device Reference No. 2876 2877 6786 Price 47 69 62 Accessories Article EL301N External light beam device HE3 (Bi-directional) External receiver Reference No. 2884 6785 Price 107 101 67

GARADOR Automation and Accessories Options Additional options De-latching kit Reference No. 705 for up & over doors (required to maintain mechanical locking system retractable doors only) Emergency release Reference No. 704 for retractable up & over doors only (required if door is electrically operated and has no other personal access) Emergency release Reference No. 703 for sectional door without handle and lock, or canopy up & over doors (required if door is electrically operated and has no other personal access) Emergency release Reference No. 702 for sectional door with handle and lock (required if door is electrically operated and has no other personal access) Lintel extension bracket Reference No. 709 for canopy doors (required if door is fitted between brickwork under the lintel) 42 38 42 42 37 68

GARADOR Automation and Accessories Specifications Operator Specifications Boom for canopy door including canopy bow arm 105 min. 3200 short boom max. 300 mm 195 On horizontal doors the bow arm is to be fitted off centre. Lintel extension bracket required for canopy doors fitted between the brickwork and under the lintel head. Boom for retractable door 105 min. 3200 short boom 70 Boom for sectional door 210 (torsion spring) 125 (torsion spring &low headroom) A (3200, 3450 or 4125) 68 * min. * 80 with low headroom kit Maximum Door Height to suit Operator Booms Torsion Spring Tension and Low Headroom Spring Short Boom 2250 mm 2125 mm Medium Boom 2500 mm 2375 mm Long Boom 3000 mm 3000 mm 69

GARADOR GaraRoll Roller Doors GaraRoll Roller Doors GaraRoll Insulated Roller Doors Spring-compensated, automated roller garage door for domestic applications only. All doors are made to suit the opening with the actual door size relating to the structural opening width x height and the guides fitting on the reveals to maintain a full opening size. The GaraRoll is the only roller garage door to include the cover hood, which the curtain rolls into at the head of the garage door opening, as standard. Door curtain 77 mm rolled aluminium profile filled with 100% CFC-free polyurethane rigid foam. Integrated windlocks fitted as standard. Surface Colour finish with double layer coil coating quality paint system or foil-coated timber effect finish. Frame Aluminium extrusion profile side guides with integrated plastic runners. Lintel and cover box made of steel. Colour of side guides and lintels supplied to match the door as standard. On timber effect doors inside is dark brown. Cover box coated Grey White (RAL 9002). Counterbalance Tension spring technology with lateral integral double tension springs and double cables encased within a transparent cover. Colours Available in Traffic White (RAL 9016), Ruby Red (RAL 3003), Steel Blue (RAL 5011), Moss Green (RAL 6005), Terra Brown (RAL 8028), Jet Black (RAL 9005), Anthracite Grey (RAL 7016), White Aluminium (RAL 9006), Light Ivory (RAL 1015), Cream (RAL 9001), Light Grey (RAL 7035), same colour inside and outside. Deco paint doors available in Golden Oak and Rosewood with the same finish inside and out. Foil-coated doors available in Golden Oak and Rosewood, with the inside of the lath in dark brown. Operator and Control Garador operator and control included. 24 V DC gear drive, mains voltage 230-240 V AC, 0.5 kw, opening speed approx. 11 cm/s, integrated door security kit, operator always located on left (viewed from inside), plastic housing. Micro-processor control in separate plastic housing, automatic teaching of auto safety cut-out and travel limits, soft start and soft stop, light, impulse control, adjustable automatic timer (hold-open time 30 sec. after activation, additional photocell required). Included: 2 hand transmitters and integral receiver, connecting lead with CEE plug, control buttons in cover of the control unit, integrated 2-minute garage light in control housing, quick release (operated from inside). Windows Window size approx. 120 x 40 mm, number of windows per door section depends on door width. Windows made of clear synthetic pane with black window frame on exterior, transparent frame on interior. Maximum of 10 window sections per door. Window arrangement: 120 x 40 min. 300 60 180 Packaging GaraRoll doors are supplied in a palleted format shrink wrapped as a complete package. Stock availability All GaraRoll doors are made to order with no standard sizes. Lead-time for all doors is 3 to 4 weeks. 70

GARADOR GaraRoll Roller Doors Remember the GaraRoll door is measured as opening size and not as overall guide width. This not only makes it the same as all other Garador doors for sizing but also will probably reduce the price against other doors as most other door manufacturers calculate the price as over guide width thus making the actual door around 200 mm smaller! Minimum product dimension is 1000 mm x 1600 mm. Smooth Paint Finish Door width Door height 1600 1875 2000 2125 2250 2375 2500 2625 2670 2750 2875 3000 3100 1000 1250 1500 1750 1900 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 1355 1355 1381 1381 1394 1472 1523 1576 1599 1682 1735 1956 2006 2097 2147 2197 2250 1355 1355 1381 1381 1394 1472 1523 1576 1599 1682 1735 1956 2006 2097 2147 2197 2250 1355 1355 1381 1381 1446 1539 1566 1610 1655 1744 1802 2041 2062 2190 2241 2293 2345 1355 1355 1381 1381 1472 1587 1627 1662 1724 1834 2031 2111 2132 2253 2304 2356 2407 1355 1355 1381 1381 1472 1587 1627 1662 1724 1834 2031 2111 2132 2253 2304 2356 2407 1448 1448 1502 1502 1522 1614 1668 1731 1782 1898 2109 2152 2238 2333 2384 2436 2486 1448 1448 1502 1502 1574 1663 1717 1783 1851 2102 2193 2274 2352 - - - - 1448 1448 1502 1502 1574 1663 1717 1783 1851 2102 2193 2274 2352 - - - - - - - - 1574 1663 1717 1783 1851 2102 2193 2274 2352 - - - - - - - - 1596 1735 1782 1839 1885 2166 2244 2339 2385 - - - - - - - - 1596 1735 1782 1839 1885 2166 2244 2339 2385 - - - - - - - - 1596 1735 1782 1839 1885 2166 2244 2339 2385 - - - - Deco Paint Finish Door width Door height 1600 1875 2000 2125 2250 2375 2500 2625 2670 2750 2875 3000 3100 1000 1250 1500 1750 1900 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 1399 1408 1443 1448 1464 1552 1612 1672 1704 1795 1858 2088 2146 2246 2304 2364 2425 1403 1414 1449 1455 1472 1561 1622 1684 1716 1809 1872 2102 2161 2262 2320 2382 2444 1407 1417 1453 1459 1529 1633 1669 1723 1779 1878 1948 2196 2228 2366 2427 2490 2552 1410 1421 1457 1463 1561 1687 1735 1783 1855 1976 2184 2276 2307 2439 2501 2564 2625 1414 1424 1461 1469 1565 1692 1742 1789 1862 1984 2192 2285 2317 2449 2511 2574 2636 1510 1521 1587 1594 1621 1723 1790 1864 1927 2056 2280 2335 2432 2539 2603 2666 2728 1512 1524 1591 1599 1677 1779 1844 1923 2005 2269 2372 2465 2556 - - - - 1513 1526 1593 1600 1678 1781 1847 1925 2008 2272 2375 2469 2560 - - - - - - - - 1682 1784 1850 1930 2012 2277 2380 2474 2565 - - - - - - - - 1708 1861 1921 1992 2053 2348 2439 2549 2610 - - - - - - - - 1713 1867 1927 1999 2059 2355 2447 2557 2619 - - - - - - - - 1717 1872 1932 2005 2065 2362 2455 2564 2626 - - - - Deco paint only available in Golden Oak or Rosewood finish. 71

GARADOR GaraRoll Roller Doors Timber effect Finish Door width Door height 1600 1875 2000 2125 2250 2375 2500 2625 2670 2750 2875 3000 3100 1000 1250 1500 1750 1900 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 1605 1630 1682 1695 1719 1828 1907 1988 2037 2150 2233 2498 2574 2698 2776 2858 2937 1619 1644 1699 1715 1740 1851 1933 2017 2068 2183 2270 2537 2616 2743 2822 2904 2988 1628 1655 1710 1726 1810 1940 1996 2071 2149 2273 2365 2654 2705 2873 2957 3041 3125 1635 1664 1722 1738 1851 2007 2079 2147 2244 2393 2637 2756 2808 2969 3054 3140 3225 1643 1674 1732 1752 1863 2022 2095 2164 2262 2415 2661 2780 2834 2997 3083 3171 3258 1755 1786 1878 1896 1932 2064 2156 2257 2346 2504 2770 2848 2973 3110 3201 3289 3374 1762 1795 1888 1908 2001 2132 2226 2333 2440 2750 2886 3006 3127 - - - - 1766 1799 1892 1913 2008 2139 2232 2340 2447 2758 2894 3016 3137 - - - - - - - - 2014 2148 2242 2350 2460 2771 2906 3029 3150 - - - - - - - - 2051 2242 2331 2428 2516 2862 2983 3125 3214 - - - - - - - - 2063 2256 2346 2445 2535 2883 3007 3149 3240 - - - - - - - - 2074 2269 2358 2460 2551 2899 3024 3169 3261 - - - - Timber Effect Foil Coat only available in Golden Oak and Rosewood finish. Options for GaraRoll doors add Manually operated version Price reduction 161 Removal of barrel casing (optional only on door height 2500 mm and over) Price reduction per m 14 External fit (reverse rolled) 61 Chamfered bottom profile available only in White or Colour. Not available in timber effect finish Ventilation grilles or Glazing element with clear synthetic pane, window section 120 x 40 mm, black glazing frame on exterior, transparent on interior (maximum of 10 sections per door, number of glazing elements dependent on the door width) per m 184 per m 21 Accessories for GaraRoll operator add Bi-directional hand transmitter, 4-channel in black 59 Bi-directional hand transmitter mini, 2-channel in black 57 Motor connection line, 10 m - Reference No. 5498 30 Acoustic door security kit - Reference No. 5499 52 Emergency battery HNA 18 - Reference No. 5500 132 Exterior emergency release - Reference No. 5501 82 Additional fascia panel required when fitting a door within the opening, ordering size will need to be door size plus guide width (price per metre) supplied in colour to match the door / guides 45 All other operator accessories can be combined with GaraRoll roller doors. Please see page 65 to page 68. 72

GARADOR GaraRoll Roller Doors Specifications Roller door fitting dimensions Fitting behind the opening Operator at left inside Required headroom 290 (LH 2300) 335 (LH 2301) Fitting depth = required headroom 275 Clear passage width = clear width (ordering size) Clear passage height = clear height (ordering size) 60 mm for automated version, 140 mm for manually operated version Clear height (LH) = ordering size Exterior 230 FFL At least 110 At least 110 Clear width (LB) = ordering size Exterior 35 75 Fitting in the opening Fitting depth = required headroom Clear passage width = clear width (ordering size) Operator at left inside 290 (LH 2300) 335 (LH 2301) 5 Clear passage height = clear height (ordering size) 60 mm for automated version, 140 mm for manually operated version Clear height (LH) = ordering size 275 Exterior 230 FFL 5 110 Clear width (LB) = ordering size 110 5 Exterior 35 75 73

GARADOR GaraRoll Lite Roller Doors GaraRoll Lite Roller Doors GaraRoll Lite Insulated Roller Doors A motor driven, roller garage door combining tubular drive motor and manual hand crank for emergencies. Designed for domestic use only with built-in integral safety catch and closing edge safety device. All doors are built to suit the opening, with the actual door size relating to the structural opening width x height and the guides fitting on the reveals to maintain a full opening size. Please refer to sizing tables over leaf for full range of size options. Door curtain 77 mm rolled aluminium profile with 100% CFC-free polyurethane rigid foam. There are two linear indentations on each profile. Surface Lintel and cover box constructed from galvanised steel. Colour of side guides and lintels supplied in Traffic White (RAL 9016) as standard. Colours Available in Traffic White (RAL 9016), Anthracite Grey (RAL 7016) and Deco Paint Golden Oak. Operator and Control Garador operator and control included. 24 V DC gear drive, mains voltage 230-240 V AC, 0.5 kw, opening speed approx. 11 cm/s, integrated door security kit, operator always located on left (viewed from inside), plastic housing. Micro-processor control in separate plastic housing, automatic teaching of auto safety cut-out and travel limits, soft start and soft stop, light, impulse control, adjustable automatic timer (hold-open time 30 sec. after activation, additional photocell required). Included: 2 x 433 MHz hand transmitters and integral receiver, connecting lead with CEE plug, control buttons in cover of the control unit, integrated 2-minute garage light in control housing, quick release (operated from inside). Windows Window size approx. 120 x 40 mm, number of windows per door section depends on door width. Windows made of clear synthetic pane with black window frame on exterior, transparent frame on interior. Maximum of 10 window sections per door. Window arrangement: 120 x 40 min. 300 60 180 Packaging GaraRoll Lite doors are supplied in a palleted format shrink wrapped as a complete package. Stock availability All GaraRoll Lite doors are made to order with no standard sizes. Lead-time for all doors is 3 to 4 weeks. 74

GARADOR GaraRoll Lite Roller Doors Minimum product dimension is 1000 mm x 1250 mm. Smooth Paint Finish Door width Door height 1250 1500 1750 2000 2125 2300 1000 1250 1500 1750 1900 2000 2250 2500 2750 3000 1086 1086 1111 1111 1124 1199 1249 1300 1323 1086 1086 1111 1111 1124 1199 1249 1300 1323 1086 1086 1111 1111 1124 1199 1249 1300 1323 1086 1086 1111 1111 1161 1254 1307 1341 1385 1086 1086 1111 1111 1199 1310 1349 1383 1443 Paint finish available in Traffic White (RAL 9016) and Anthracite Grey (RAL 7016). Deco Paint Finish Door width Door height 1250 1500 1750 2000 2125 2300 1000 1250 1500 1750 1900 2000 2250 2500 2750 3000 1121 1128 1161 1165 1181 1262 1320 1378 1409 1127 1136 1169 1174 1190 1273 1331 1391 1423 1134 1143 1177 1182 1200 1284 1344 1404 1438 1136 1147 1182 1188 1242 1344 1407 1452 1508 1140 1151 1187 1193 1286 1408 1457 1502 1575 Deco Paint finish only available in Golden Oak. Additional Hand Transmitter add GaraRoll Lite 433 MHz 2-button hand transmitter 42 Please note: GaraRoll Lite uses different radio equipment to the standard Garador products and therefore with the exception of some hard wired accessories, all other accessories are not compatible with the GaraRoll Lite roller door. Please consult the Garador technical department for further information. 75

GARADOR GaraRoll Lite Roller Doors Specifications Roller door fitting dimensions Fitting behind the opening LB + 145 Fitting depth = required headroom OFF 1500 Clear height (LH) = ordering size Exterior Min. 75 Clear width (LB) = ordering size Exterior Min. 75 40 Required headroom 290 OFF Min. LB + 150 72 72 Clear passage width = clear width (ordering size) Clear passage height = clear height (ordering size) 60 mm for automated version, 140 mm for manually operated version 76

GARADOR For your Notes 77

GARADOR FrontGuard Entrance Doors FrontGuard Entrance Doors FrontGuard Steel Door FGS Steel door leaf with foam filled core and thermal break, exterior and interior overlapping the leaf, 46 mm thick, in classic, contemporary and modern designs. Standard polyester primer coating White (RAL 9016) in a smooth finish (inside and out). Surface Flush fitting door leaf on the interior and exterior of the door, with a leaf frame on the inside and a thick rebate. The flush fit on the interior gives the impression of a residential internal door can be optimally integrated into your house s interior. Colours White (RAL 9016) as standard. Optional colours available for all doors: White Aluminium (RAL 9006), Terra Brown (RAL 8028), Clay Brown (RAL 8003), Ochre Brown (RAL 8001), Window Grey (RAL 7040), Light Grey (RAL 7035), Anthracite Grey (RAL 7016), Moss Green (RAL 6005), Ruby Red (RAL 3003), Light Ivory (RAL 1015), Pigeon Blue (RAL 5014) and Titan Metallic finish (CH 703). Timber Effect Optional surface finishes available for FGS 010, FGS 015, FGS 700 and FGS 900: Foil-coated timber effect in Golden Oak, Dark Oak, Night Oak and Winchester Oak and foil coated Titan Metallic finish. Seals 4-sided double, black EPDM seals. Brush seal at the bottom, 20 mm high plastic threshold with thermal break. Locks & bolts 11-point security: 2 conical swing bolts engage with 2 additional security bolts and 1 deadbolt in the frame s lock plates. 3 further security bolts on the hinge side and three barrel hinges. Drip angle Optional, Traffic White (RAL 9016). Invisible fastening and plastic cover cap at each end. Hinges Three 2-piece 3-way adjustable hinges with hinge caps in aluminium look. Handles / Letter plates Lever/lever handle set and letter plate in silver to choose as standard on classic designs. Contemporary and modern designs all have fixed bar handles on the outside and therefore a key is required to open these doors from the outside at all times. Profile cylinder and keys Cylinder length with fixed bar handles: 27.5 x 35.5 mm. Cylinder length with standard lever/lever or lever/knob handle set: 31.5 x 40.5 mm. 5 keys supplied as standard, 8 or 10 keys available as an option. Packaging FrontGuard doors are packed with polystyrene around the door and then shrink wrapped. Side elements are transported with glass already fitted. Stock availability Made to order. Approximately 8 weeks lead time. 78

GARADOR FrontGuard Entrance Doors Contemporary FGS 010 FrontGuard FrontGuard Plus Size (W x H) RAL 9016 Colour T-Effect RAL 9016 Colour T-Effect 1000 x 2100 1100 x 2100 918 1105 1140 1271 1458 1494 from 875 x 1875 up to 1250 x 2250 1216 1402 1439 1570 1757 1792 U D -value for size 1230 x 2180 mm: approx. 0.87 W/(m 2 K) for FrontGuard Plus FGS 015 1000 x 2100 1100 x 2100 986 1173 1209 1339 1526 1564 from 875 x 1990 up to 1250 x 2250 1286 1472 1509 1639 1826 1862 U D -value for size 1230 x 2180 mm: approx. 0.87 W/(m 2 K) for FrontGuard Plus FGS 020 1000 x 2100 1100 x 2100 1257 1666 1703 - - - from 875 x 1990 up to 1250 x 2250 1555 1965 2001 - - - U D -value for size 1230 x 2180 mm: approx. 1.4 W/(m 2 K) FGS 025 1000 x 2100 1100 x 2100 1324 1733 1770 - - - from 875 x 1900 up to 1250 x 2250 1624 2033 2070 - - - U D -value for size 1230 x 2180 mm: approx. 1.4 W/(m 2 K) FGS 030 1000 x 2100 1100 x 2100 1327 1736 1773 - - - from 875 x 1990 up to 1250 x 2250 1627 2036 2073 - - - U D -value for size 1230 x 2180 mm: approx. 1.2 W/(m 2 K) FGS 040 1000 x 2100 1100 x 2100 1232 1641 1678 - - - from 875 x 1875 up to 1250 x 2250 1531 1941 1977 - - - U D -value for size 1230 x 2180 mm: approx. 1.2 W/(m 2 K) 79

GARADOR FrontGuard Entrance Doors Modern FrontGuard FrontGuard Plus Size (W x H) RAL 9016 Colour T-Effect RAL 9016 Colour T-Effect FGS 700 1000 x 2100 1100 x 2100 1641 1828 1864 1995 2182 2219 from 875 x 1990 up to 1250 x 2250 1941 2127 2164 2294 2481 2518 U D -value for size 1230 x 2180 mm: approx. 0.98 W/(m 2 K) for FrontGuard Plus FGS 750 1000 x 2100 1100 x 2100 1641 1828 1864 1995 2182 2219 from 875 x 1990 up to 1250 x 2250 1941 2127 2164 2294 2481 2518 U D -value for size 1230 x 2180 mm: approx. 0.95 W/(m 2 K) for FrontGuard Plus FGS 800 1000 x 2100 1100 x 2100 - - - 2143 2331 2367 from 875 x 1990 up to 1250 x 2250 - - - 2441 2628 2665 U D -value for size 1230 x 2180 mm: approx. 0.96 W/(m 2 K) for FrontGuard Plus FGS 810 1000 x 2100 1100 x 2100 - - - 2143 2331 2367 from 875 x 1990 up to 1250 x 2250 - - - 2441 2628 2665 U D -value for size 1230 x 2180 mm: approx. 0.96 W/(m 2 K) for FrontGuard Plus FGS 850 1000 x 2100 1100 x 2100 - - - 2317 2504 2540 from 875 x 1990 up to 1250 x 2250 - - - 2617 2804 2839 U D -value for size 1230 x 2180 mm: approx. 0.96 W/(m 2 K) for FrontGuard Plus FGS 900 1000 x 2100 1100 x 2100 1789 1976 2013 2143 2331 2367 from 875 x 1990 up to 1250 x 2250 2088 2275 2311 2441 2628 2665 U D -value for size 1230 x 2180 mm: approx. 0.96 W/(m 2 K) for FrontGuard Plus 80

GARADOR FrontGuard Entrance Doors Classic FrontGuard FrontGuard Plus Size (W x H) RAL 9016 Colour T-Effect RAL 9016 Colour T-Effect FGS 100 1000 x 2100 1100 x 2100 943 1130 - - - - from 875 x 1990 up to 1100 x 2186 1242 1429 - - - - U D -value for size 1230 x 2180 mm: approx. 1.1 W/(m 2 K) FGS 200 1000 x 2100 1100 x 2100 1039 1448 - - - - from 875 x 1990 up to 1100 x 2186 1337 1748 - - - - U D -value for size 1230 x 2180 mm: approx. 1.2 W/(m 2 K) FGS 400 1000 x 2100 1100 x 2100 1111 1520 - - - - from 875 x 1990 up to 1100 x 2186 1409 1819 - - - - U D -value for size 1230 x 2180 mm: approx. 1.4 W/(m 2 K) Windows FGS 200, FGS 400: 24 mm double pane insulated safety glass. Hammered glass design on the inside, clear on the outside. Composite glazing frame, surface-mounted composite rails. FGS 020, FGS 025, FGS 030: 24 mm double pane insulated safety glass. Mastercarré glass design in matt finish on the inside, clear on the outside. Roundstyle composite frame, bonded. FGS 040: FGS 700, FGS 750, FGS 850, FGS 900: 24 mm double pane insulated safety glass. Ornamental glass design on the inside, clear on the outside. Roundstyle composite frame, bonded. Triple pane insulated safety glass, 44 mm thick. Sand-blasted with matt/clear finish stripes inside, clear outside. Flush-fitting glazing frames in stainless steel, bonded. Side elements/transom lights FGS 100, FGS 200: 46 mm thick side element comes with 3 raised panels. FGS 400: 24 mm double pane insulated safety glass Hammered glass design on the inside, clear on the outside. Composite glazing frame, surface-mounted composite rails. FGS 020, FGS 025, FGS 030: 24 mm double pane insulated safety glass. Mastercarré glass design in matt finish on the inside, clear on the outside. FGS 040: FGS 700, FGS 750, FGS 850, FGS 900: Roundstyle composite frame, bonded. 24 mm double pane insulated safety glass. Ornamental glass design on the inside, clear on the outside. Roundstyle composite frame, bonded. Triple pane insulated safety glass, 44 mm thick. Sand-blasted with matt/clear finish inside, clear outside. Flush-fitting glazing frames in stainless steel, bonded. 81

GARADOR FrontGuard Entrance Doors Side elements All FrontGuard doors are available with side elements. Side elements may be on the left and/or right hand side of the door. Side elements come in Traffic White, RAL 9016 as standard. Side element standard sizes Ordering sizes in mm (W x H) Glass RAL 9016 Colour Timber Effect 400 x 2100 Mastercarré Clear glass Sandblasted float Ornamental glass 504 Cathedral glass 633 734 769 Decors: Golden Oak, Dark Oak, Night Oak, Winchester Oak and Titan Metallic (CH 703). Side element special sizes for modern and contemporary designs Ordering sizes in mm (W x H) Glass RAL 9016 Colour Timber Effect From 300 x 1875 Glass in accordance with 742 852 880 to 500 x 2250 the overview on page 83 to 1000 x 2250 2 1036 1170 1173 2 Only possible without transom light. Door set with side element does not have a statics function. Statics must be ensured by the building structure. Decors: Golden Oak, Dark Oak, Night Oak, Winchester Oak and Titan Metallic (CH 703). Side element special sizes for classic designs Ordering sizes in mm (W x H) Panel / glass RAL 9016 Colour From 450 x 1960 to 450 x 2186 From 450 x 1960 to 450 x 2186 Panel without glass in accordance with the overview on page 83 Panel with glass in accordance with the overview on page 83 546 648 604 706 Transom lights Our FrontGuard doors are availabe with a transom light. It can be arranged above the door or above door and side element(s). Transom lights come in Traffic White, RAL 9016 as standard. Transom light Ordering sizes in mm (W x H) Glass RAL 9016 Colour Timber Effect From 875 x 300 to 1250 x 500 Glass in accordance with 594 698 732 to 1750 x 500 the overview on page 83 746 851 884 to 2250 x 500 895 997 1031 Decors: Golden Oak, Dark Oak, Night Oak, Winchester Oak and Titan Metallic (CH 703). For dimensions please see specifications on page 85. 82

GARADOR FrontGuard Entrance Doors Modern Glass Side element Transom light 1. Clear laminated safety glass / sand-blasted laminated safety glass (without clear stripes) 2. Clear laminated safety glass / clear laminated safety glass Width 300-1000 mm Height 1990-2250 mm Width 875-2250 mm Height 300-500 mm FGS 700 FGS 750 FGS 850 FGS 900 Contemporary Glass Side element Transom light FGS 010 FGS 015 1. Clear laminated safety glass / Mastercarré single-pane safety glass 2. Clear laminated safety glass / single-pane safety ornamental glass 504 3. Clear laminated safety glass / sand-blasted laminated safety glass (without clear stripes) 4. Clear laminated safety glass / clear laminated safety glass Width 300-1000 mm Height 1875-2250 mm Width 875-2250 mm Height 300-500 mm 1. Clear laminated safety glass / Mastercarré single-pane safety glass 2. Clear laminated safety glass / clear laminated safety glass Width 300-1000 mm Height 1990-2250 mm Width 875-2250 mm Height 300-500 mm FGS 020 FGS 025 FGS 030 1. Clear laminated safety glass / single-pane safety ornamental glass 504 2. Clear laminated safety glass / clear laminated safety glass Width 300-1000 mm Height 1875-2250 mm Width 875-2250 mm Height 300-500 mm FGS 040 Classic Glass Side element Transom light FGS 100 FGS 200 1. Element with 3 panels 2. Clear laminated safety glass / clear laminated safety glass 3. Clear laminated safety glass / single-pane safety cathedral glass Width panel 450 mm, width glass 300-1000 mm Height 1990-2186 mm Width 875-2250 mm Height 300-500 mm FGS 400 1. Element with 1 panel and glazing cut-out with clear laminated safety glass / single-pane safety cathedral glass 2. Clear laminated safety glass / clear laminated safety glass 3. Clear laminated safety glass / single-pane safety cathedral glass Width panel 450 mm, width glass 300-1000 mm Height 1990-2186 mm Width 875-2250 mm Height 300-500 mm 83

GARADOR FrontGuard Entrance Doors Options Optional extras Article Aluminium letter plate in gold or silver 1 Outside knob / inside lever in gold or silver 1 Stainless steel embellishments for FGS 015 Price 37 42 150 1 Only available on Classic Range Optional extras Article Spyhole in brass or chrome (for fitting on site, door leaf supplied undrilled) Profile cylinder complete, supplied with 8 keys Profile Cylinder Complete, supplied with 10 keys Price 18 44 65 The hole for the spyhole needs to be drilled onsite and the kit needs to be fitted manually. Optional extras Article Electric strike with day catch (separate) Large brushed stainless steel handle Surcharge for standard bar handle Stainless steel cleaner and care product (150 ml) Price 66 107 26 84

GARADOR FrontGuard Entrance Doors Specifications FrontGuard Door Specifications Width of transom light Plan view of door with side element Height of transom light Structural opening Overall frame dimension Clear passage Height of door / side element Plan view of door with side element Width of side element Width of door Width of side element Clear passage Overall frame dimension Structural opening All dimensions are overall frame dimensions Plan view of door Roundstyle frame Structural opening Overall frame dimension 64 34 60,5 31,5 Clear passage 45 Side view of door Quadrangular frame 64 Clear passage = RAM 84 Overall frame dimension (RAM) Structural opening = RAM + 10 45 31,5 60,5 85

GARADOR User Information / Care User Information / Care A Garador garage door needs only a minimum level of preparation and maintenance to give years of trouble-free service. Below is a guide to how to get the best from your garage door. Operation For opening the door in manual operation use only the outside handle or inside handle. Never use the pull rope during the opening cycle of the door. For closing the door from the outside the pull rope fixed to the internal handle is only designed to pull the door towards you whilst standing within the entrance of the garage until the door can be pushed down by hand, then using the external handle for final closing. For closing the door from the inside the pull rope already mentioned is designed to be pulled away from you, when facing the front entrance of the garage, until the internal handle is able to be reached, by hand, and used for final closing. The pull rope is not designed to be used for any other part of the operating cycle, or any other purpose. Failure to comply with the above instructions may result in injury to persons or property. When the door is operated from either outside or inside, check the area through which the door will travel is clear from people and objects. Failure to do so may result in injury to persons or property. When closing, ensure the latches engage properly. If the door is power-operated always try to ensure you match the door with a GaraMatic electric operator. Power Operated Garage Doors It is against the Law to install a power operated garage door in the UK without complying with The Machinery Directive. To comply with the Machinery Directive both the door and the operator used in the Installation must have a declaration of Incorporation from the manufacturer. On completion of the installation the Installer must provide a Declaration of conformity and apply a CE mark giving details of the installation to the door/operator combination, which is now classed as a machine. The Installer must issue to the Customer a declaration of conformity on the completion of the installation. The Installer must hold copies of both the Declarations of Incorporation and the Declaration of Conformity on a technical file for inspection by the relevant authorities. If any of the above requirements are not fulfilled the Installation is illegal. Please ensure for your own safety and peace of mind that whoever installs your electric operator is both willing and able to fulfil these requirements; if they are not do not use them!! Members of the DHF CAN and WILL install your operator safely and legally. Cleaning The door and frame if applicable, should be washed with a mild soap-based solution on a regular basis to prevent the build up of dirt, salts and other corrosive substances and help maintain the aesthetic appearance of the product. If the door is installed in a coastal location, the door panel and frame should be cleaned in this way at least every two months. We also suggest that all other components be brushed down on a regular basis to prevent the build up of dirt and dust etc. On GaraRoll roller doors regular removal of dirt and debris is required to avoid damage to laths when the curtain rolls. Locking If the key is turned completely, the door is then locked or unlocked; when unlocked it is then possible to open and close the door by turning the handle. If the key is turned 1 4 of the way, the door opened and then the key returned to its start position, the door will re-lock when closed. By moving the internal locking snib, it is possible to lock and unlock the door from the inside without using the key, except on SBD doors where there is no internal snib/locking system. 86 Maintenance If in doubt about any of these maintenance procedures below always consult a Garador specialist. Garador Ltd. has a nationwide network of installers who will be able to offer you a regular maintenance service on your garage door. Please call Garador or refer to the Garador website for further details of your nearest installer. Immediately after the door is fitted and after every 5,000 operations of the door, or at least once a year, oil all pivot points, check screws and clamped connections for tightness, keep the running tracks clean (do not grease them), check parts and replace any worn components where necessary. The springs should be replaced after approx. 25,000 operations by an experienced door fitter (see fitting and operation instructions). Do not oil the lock cylinder; if it is sticking, only lubricate with graphite dust. For canopy doors only, check the cable every 6 months with normal usage (8 operations per day). Have the cables replaced by an expert if any wear is found.

GARADOR User Information / Care Finish Steel Doors The coating process applied to the door and chassis is environmentally friendly. Minor scratches or marks are not covered under the conditions of our warranty and should be repaired immediately to prevent corrosion and deterioration of the panel. Corrosive substances such as acids, alkalines, and salts, etc. should be cleaned from the door immediately; failure to do so will result in deterioration of the finish, which will not be covered under our warranty. Garador steel doors are finished products. They do not require painting on-site. They are however not immune to damage, which can occur at any stage of the handling of the product from factory to site. Should deterioration of the finish start to occur you will need to repaint your door immediately. Prepare the surface lightly with wet and dry. Then treat with solvent based 2 pack epoxy wash primer and a normal commercial paint (cellulose paint must not be used). Minor surface damage can easily be repaired using touch up sprays or paint sticks without invalidating your warranty. Finish Timber Doors Timber panels are coated with a neutralising base-stain. Doors must be stored upright, under cover in a dry location, with wrapping intact, until wrapping is removed. As soon as the door is unwrapped, one coat of a good quality basecoat primer must be applied to both sides of the door. Immediately after installation, your timber doors require a further two coats of a good quality exterior wood finish on both sides. Initial application and periodic treatment should be carried out strictly in accordance with the woodstain manufacturer s instructions. Failure to follow these instructions will result in early deterioration of the timber panel which would not be covered under our warranty. Finish GRP Doors GRP door panels should be periodically washed down using water. This should be done more frequently if fitted in a coastal location. Bird droppings will bleach the finish on GRP and should be removed using water as soon as possible. GRP doors should not be painted over. 87

GARADOR Warranty Warranty Garador products are manufactured to the highest quality standards and leave our factory only after rigorous quality testing. However, if you should have grounds for complaint, this section tells you what our door warranty offers, and how to go about making your claim. In the unlikely event of a warranty claim becoming necessary, please contact the dealer or distributor who originally supplied your garage door. Your dealer should then supply details of the claim, together with a copy of the warranty card provided with the door and proof of purchase to the Warranty Department at Garador Ltd. To enable your claim under warranty to be processed as quickly as possible, you should provide the following details: 1 Your name, address and telephone number 2 Original invoice with date of purchase 3 Product description/door type and product number 4 Description of defect An assessment of the claim will then be made. This may require Garador to inspect the product in-situ. In the event that there is no legitimate warranty claim under the terms specified herein, you may be liable for the costs of the inspection visit. We strongly recommend that you take note of the care and usage instructions displayed on the stickers on the back of your garage door and on the previous page and that you follow these instructions throughout. Garador installers Garador Ltd. has a nationwide network of recommended installers who will be able to offer you a regular maintenance service on your garage door. Please call us on 01935 443722 or refer to the Garador website for further details of your nearest installer. Garador Garage Door Warranty Warranty Period The purchaser is granted a warranty covering the safe and reliable function of the Garador garage door for a period of 10 years from the date of purchase. A 5 year warranty applies to springs, wire cables, track rollers, hinges and guide rollers. The warranty period for replacement parts is 6 months or to the end of the current warranty period, whichever is longer. In the case of foil-coated timber effect and PVC doors, a warranty of 5 years is granted, for timber and GRP doors a warranty of 2 years is granted on the door panels alone under the terms and conditions specified herein. The door mechanism and steel frame (if applicable) is covered by the 10 year warranty period. Requirements Warranty claims are only applicable in the country where the garage door was purchased. The product must have been purchased through our authorised distribution channels. The warranty only covers damage to the contract object. The fully completed warranty card together with the receipt of purchase correspondingly dated substantiates your right to claim under the warranty. Performance During the warranty period we undertake to rectify any and all defects to the Garador product which can be proved to be attributed to a material or manufacturing fault. We pledge at our discretion either to exchange the defective merchandise for faultless merchandise, repair it or allow a reduction in price. We do not accept costs for dismantling and installation nor for carriage. Replaced parts become our property. The warranty does not cover damage caused through: normal wear and tear improper installation negligent care and maintenance improper initial and subsequent operation negligent or wanton destruction external influences such as fire, water, salts, alkaline solutions, acids, abnormal environmental influences mechanical damage through improper transport and fitting priming and other surface protection treatments incorrect or too late applied surface protection treatments repair by non-qualified persons using non-garador parts without the approval of the manufacturer Removal of the product number or making it unidentifiable 88

GARADOR Warranty Warranty GaraRoll GaraRoll roller doors are subject to a limited 10 year warranty. The design of these doors represents state of the art technology. Pressure marks and abrasive wear, particularly on the top profiles are a condition of the design and cannot be avoided. They are not considered a reason for complaint. In order to avoid excessive friction, remove any dirt and debris from the door curtain at regular intervals. For motors and controls, see warranty below. Warranty GaraRoll Lite GaraRoll Lite doors are subject to a 2-year warranty. Pressure marks and abrasive wear, particularly on the top profiles are a condition of the design and cannot be avoided. They are not considered a reason for complaint. In order to avoid excessive friction, remove any dirt and debris from the door curtain at regular intervals. Electric Operator Warranty A separate 5 year warranty is granted on our electric operators. This includes operator mechanics, motor and motor control systems. A 2 year warranty is granted on radio equipment, accessories and system controls. There is no warranty on consumables (e. g. fuses, batteries, bulbs etc.). For further details please contact us on 01935 443722, or through our website on www.garador.co.uk Garador FrontGuard Warranty Warranty Period The purchaser is granted a warranty covering mechanical parts for a period of 5 years from the date of purchase. The warranty period for replacement parts is 6 months, however, at least the current warranty period. Requirements Warranty claims are only applicable in the country where the entrance door was purchased. The product must have been purchased through our authorised distribution channels. The warranty only covers damage to the contract object. The receipt of purchase correspondingly dated and signed by the dealer substantiates your right to claim under warranty. Performance During the warranty period we undertake to rectify any and all defects to the Garador product which can be proved to be attributed to a material or manufacturing fault. We pledge at our discretion to either exchange the defective merchandise for faultless merchandise, repair it or allow a reduction in price. We do not accept costs for dismantling and installation nor for carriage. Replaced parts become our property. The warranty does not cover damage caused through: improper installation and negligent care and maintenance improper initial and subsequent operation negligent or wanton destruction external influences such as fire, water, salts, alkaline solutions, acids, abnormal environmental influences, force majeure removal of the product number making it unidentifiable mechanical damage through improper transport and fitting priming and other surface protection treatment repair by non-qualified persons using non-garador parts without the approval of the manufacturer 89

Extracts from DHF consumer advice GARADOR Extracts from DHF consumer advice The following document has been created by the Door and Hardware Federation (DHF) and endorsed by all major UK garage door manufacturers, as a guide for purchasers and domestic garage doors. Visual Appearance of Garage Doors A new garage door can be a significant investment that will transform the appearance of your home. This information is a guide to the quality you can expect. The Quality Check The quality check should be carried out in natural daylight, not direct sunlight. Stand at a distance of 3 metres from the door to view the overall appearance. The door is acceptable if, taking into account the facts below, none of the following are readily visible on the face of the door: Marks or distortion associated with the manufacturing process Minor indentations, marks or scuffs on the surface Paint or stain blemishes The Facts Steel Doors Panel Distortion The rolling or pressing of steel panels during manufacture will cause distortion in the steel and while every effort is made to keep this to a minimum, inevitably some visible distortion will remain. The application of high gloss paints will make this slight distortion more apparent, especially under certain lighting conditions, such as car headlamps, or bright sunshine. Paint Finish Primed doors the primer coating is applied as a base coat only and as such requires additional finishing with a good quality exterior paint. Any marks or scratches on the primer coat should be rubbed down and repainted as part of this finishing process. Finished doors the factory application of the paint finish is an automated process and this may result in minor blemishes or slight inconsistencies in the paint, particularly in the area of panel joints. Timber Doors Timber Timber is a natural product and there will be variations in pattern, colour, shading and grains. No two doors will be the same. Wood naturally expands and contracts according to environmental conditions, joints will open and close and some minor curvature may occur. Finishing It is vital that timber doors are fully finished as per the manufacturers instructions before exposure to the elements. GRP and composite Plastic Doors Mould Marks GRP doors are individually handcrafted in a mould and are then hand finished. Some minor marks and blemishes will inevitably remain after this process. Translucency When viewed from the inside, it is often possible to see variations in the translucency of the door, particularly around and between areas of relief. Such variations do not detract from the overall strength or build quality of the door. All Doors Colour Match Pairs of doors should be ordered together to obtain the best colour match, bearing in mind the limitations of the materials used in the construction. Timber garage doors cannot be ordered as matching sets. 90

GARADOR Extracts from DHF consumer advice Size Variations As the size of a door changes in height and/or width, the panel frequency and profile can change, therefore doors of the same style but of different sizes can be significantly different in appearance. Clearances All doors require operating clearances, i.e. the gap between the door panel and the frame opening, these are inbuilt during manufacture and should not be reduced by means of infills, or draughtproofing. Deflection When in the open position, all doors will display a level of vertical deflection or sag across the width of the panel. Individual manufacturers specifications should be consulted for exact tolerances. 91

Bunford Lane, Yeovil, Somerset, BA20 2EJ Tel: (01935) 443722 Fax: (01935) 443744 www.garador.co.uk Garador is the UK s leading manufacturer of garage doors and operators, with an ultra-modern production facility located in Somerset. We use German engineering expertise to produce highly sophisticated doors and operators. By purchasing a Garador product you can be assured of the highest level of quality, safety and security. With a nationwide network of stockists, installers and service technicians we are an ideal partner for your project. Issue 10.16 / Print 10.16 / HFGD-20000