1/9 Description IP66, Class I. IK07. Marine-grade die-cast aluminium alloy. 5CE superior corrosion protection including PCS hardware. Silicone CCG Controlled Compression Gasket. Safety glass lens. PMMA-LED lens array. Beam Type Lamp Type Gear Type symmetric, medium beam LED-12/24W / 700 ma - 3000 K EC Nominal Luminous Flux (lm) LED Lumens 245.9 lm LEDs 12 Total Lumens 2951 lm Tj 85 C Rated Luminous Flux (lm) LED Lumens Total Lumens 211.9 lm 2542.8 lm Ta 25 C Rated Input Power 28 W
2/9 Additional Specifications Material Specification Body: Marine grade die cast aluminium alloy Weight: 2.5 kg Lens: Toughened glass Gasket: CCG controlled compression gasket, one piece moulded silicone Fasteners: PCS polymer coated #304 grade stainless steel Ingress protection: IP66 Impact protection: IK09 Corrosion protection: 5CE corrosion protection system Finish: Exterior grade polyester powdercoat in RAL9004, RAL9016, RAL9006, RAL9007 fine texture Electrical Specification Power supply: 240V 50Hz Power factor: >0.9 Ballast: LED controller, constant current, 4/2 KV surge protection Cable Entry: Single IP68 compression gland to suit 3core circular or flat twin Earth Termination: 1x2.5mm² 3 pole terminal block
3/9 Mounting Accessories Ground spike EF Ground spike made from stainless steel. Including 5 m of flexible cable and plug. H1 146-0251 Ground spike EF1-2/M8 for FL31/141 270 0.40 JB1 Junction box All mounting accessories are made from marine-grade, die-cast aluminium alloy unless otherwise noted. IP55. D1 D2 M1 310-9000 JB1 Junction box 135 67 9 1.60 Pipe clamp SP Pipe clamps made from die-cast aluminium with stainless steel hardware. For mounting of one or two floodlights. Max. permissible weight per installed floodlight 15.0 kg. D1 146-0245 SP1-2/M8 Pipe clamp, single 38-60 1.00
4/9 D1 146-0246 SP1-2/M8 Pipe clamp, single 76-89 1.20 D1 146-0247 SP2-2/M8 Pipe clamp, double 38-60 1.00 D1 146-0248 SP2-2/M8 Pipe clamp, double 76-89 1.20 Planted root Planted root made from hot dipped galvanized steel. Includes mounting hardware. Supports installation of EM short post in landscaped areas. H1 H2 300-0461 Planted root ESV4 400 350 4.40
5/9 Short post EM Short posts made from die-cast aluminium with concealed stainless steel hardware. For mounting of one floodlight. D1 D2 H1 M1 146-0253 EM1-2/M8 160 130 200 9 1.10
6/9 Optical Accessories Colour filter Dichroic colour filters available in red, green, blue, yellow. Custom colours or conversion filters to change colour temperature are available on request. Internal component. 146-9413 Colour filter IF green 146-9414 Colour filter IF yellow 146-9416 Colour filter IF red Colour filter Dichroic colour filters available in red, green, blue, yellow. Custom colours or conversion filters to change colour temperature are available on request. Internal component. A D1 D2 H1 M1 L1 146-9411 Colour filter IF blue 0.00 - - - - 0.00 0 Surface wash lens IO-360 Broadens light distribution in all planes. Does not fit in combination with [B] lens. 146-0419 Flood lens IO-360 ideally suitable for [EE] [EES] 110 Glare shield Glare shield made from corrosion resistant aluminium.
7/9 A 146-0156 Glare shield ES 100 110 Honeycomb louvre IW Honeycomb louvre, matt black Teflon coated. For luminaires equipped with [M] [EE] [EES] light distribution. 146-0625 Honeycomb Louvre IW 110 Linear louvre Linear louvre, matt black Teflon coated. For luminaires equipped with a wide, medium or very narrow beam versions. 146-9055 Linear louvre IL 110 Linear spread lens IO-180 Broadens light distribution in one plane only. Does not fit in combination with [B] lens. 146-0418 Linear spread lens IO-180 ideally suitable for [M] [EE] [EES]
8/9 Snoot Framing snoot made from corrosion resistant aluminium. Provides all-round glare cut-off as well as effective framing of beam. Inner surfaces matt black powdercoated. A 146-0397 Snoot ET 126 95,5 Wallwash lens IO-20 Specifically developed for the lighting of architectural surfaces, in combination with WE-EF [M] symmetric medium beam LED optics. Luminaires fitted with the I0-20 wallwash lens are typically positioned at 0.125 x h away from the target surface and spaced up to 1.75 x d apart: h = height of wall/target surface d = 0.125 x h = distance from the wall/target surface s = 1.75 x d = spacing between luminaires The IO-20 LED wallwash lens is factory-installed within the luminaire. The factory-sealed qualities and advantages of the luminaire are fully maintained. 146-0645 Wallwash lens IO-20 110 Wire guard Wire guard made from corrosion resistant aluminium. Provides protection for the lens and acts as a safety barrier against accidental skin contact. External bayonet mounting system.
9/9 146-0158 Wire guard EG 126 Colour correction filter A D1 D2 H1 M1 L1 on request IF-3000K > 2400K - - - - - 0.00 0