Parts / Spares Reference Sheet Graco Husky 3300 Parts 3300A, Aluminum 3 3 5 1a see page 3 1 1 13 1b see page 30 1b 1a 11 1 13 1c 1 1d 3 1 1 15 0 see page 35 3 5 1 Not used on some models. ti1a 3A011H For more information: 1300 35 / www.burwell.com.au Copyright 01 Burwell Technologies
3300P, Polypropylene 3 3 3 5 1a see page 1b see page 30 1b 1c 1a 1 1 13 11 1 13 15 0 see page 35 305 1 1 1d 3 5 3 1 Not used on some models. ti1a 3A011H 3 of 1
3300S, Stainless Steel 3 3 3 3 5 1b see page 30 3 1b 1a 1 1 13 11 1 13 1 1c 1a see page 1d 1 1 15 0 see page 35 305 3 3 3 3 5 1 Not used on some models. ti13a 3A011H 3 of 1
Parts/Kits Quick Reference Use this table as a quick reference for parts/kits. See pages indicated in table for full description of kit contents. Ref. Part/Kit Description 1a CENTER SECTION, not sold separately, see page ----- Aluminum ----- Polypropylene 1b AIR VALVE; see page 30 FLUID COVER KITS; K1 Aluminum K3 Polypropylene K Stainless Steel 3 MANIFOLD, outlet elbow kits;. K5 Aluminum K Polypropylene K Stainless Steel MANIFOLD, inlet elbow kits;. K Aluminum K Polypropylene K3 Stainless Steel 5 MANIFOLD, center kits,. K Aluminum, npt K Aluminum, bspt K0 Polypropylene K Stainless Steel, npt K0 Stainless Steel, bspt SEAL, manifold joint, see page 3 K0 Buna-N, for aluminum poly K PTFE, for aluminum poly K PTFE, for stainless steel BOLTS, manifold elbows to center; not used on stainless steel, K Aluminum K1 Polypropylene FASTENERS, manifold to fluid cover, see page 33 K5 Aluminum K3 Polypropylene K Stainless Steel ----- WASHER, included with fastener kits ----- NUT, included with refs 3 3 Ref. Part/Kit Description 11 SEATS; -pack, see page 3 K Acetal K Aluminum K30 Buna-N K3 FKM Fluoroelastomer K31 Geolast K33 Polypropylene K3 Santoprene K35 Stainless Steel K3 TPE 1 CHECK BALLS; -pack, see page 3 K3 Acetal K3 Buna-N K1 Polychloroprene, stard K Polychloroprene, weighted K5 FKM Fluoroelastomer K3 Geolast K3 PTFE K Santoprene K0 TPE 13 O-RING, seat (not used on some models); -pack, see page 3 K0 Buna-N K PTFE 1 K5 PLATE, air side diaphragm, includes o-ring (1) washer () 15 PLATE, fluid side diaphragm, see page 3 K0 Aluminum K0 Polypropylene K0 Stainless steel 1 ----- SCREW, hex washer head, 3/-11x 3 in., carbon steel, included with Ref. 15 1 ----- O-RING, included with Refs. 1 15 ----- WASHER, included with Refs. 1 15 0 DIAPHRAGM Kits; see page 35 K Buna-N Stard K03 FKM Stard K00 Geolast Stard K Polychloroprene Overmolded K0 Polychloroprene Stard K PTFE Overmolded K05 PTFE/Santoprene Two-Piece K0 Santoprene Stard K01 TPE Stard Continued 3A011H 5 of 1
Ref. Part/Kit Description 1a- 1d P3 MUFFLER, includes o-ring mounting hardware 3 BRACKET, mounting, see page 3 K3 Aluminum K Polypropylene Stainless Steel ----- BOLT, mounting, 1/-13, included in bracket kit 5 1 LABEL, warning (not shown) 33 TAG, warning, retorque (not shown) 1F33 Aluminum 1F33 Polypropylene 1F Stainless Steel 3 K5 KIT, manifold clamp, used on stainless steel 3 3 FASTENERS, fluid cover to air cover, see page 33 K Aluminum K Polypropylene, with poly center K5 Polypropylene, with alum center K Stainless Steel with alum center K Stainless Steel with poly center 3 3 LABEL, warning, multilingual (not shown) Replacement Warning labels, signs, tags, cards are available at no cost. 3A011H 5 of 1
Air Covers O-rings Apply lithium-based grease. Aluminum Lips must face out of housing. * Aluminum: Torque to 30-0 ft-lb. (1-5 N m). Torque to 0-5 in.-lb (.3-. N m). 111 113* * 5 * 3 3 * 11* 1* 1* tia Aluminum Ref. Description Qty. 1* U-CUP, center shaft SCREW, ground 3 BOLT, socket head, /1-1 x.5, zinc-plated carbon steel * SCREW, M x 5, stainless steel 5 COVER, air HOUSING, center, not sold separately 1 * GASKET, air cover * SHAFT, center 1 * BEARING, shaft 1* VALVE, pilot, assembly Ref. Description Qty. 111 VALVE, air, see page 31 1 11* PIN, dowel, stainless steel 113* GASKET, air valve 1 11 LUBRICANT, thread, not shown 1 115 SEALANT, anaerobic, not shown 1 * Included in Rebuild Kit. The center housing () is not sold separately. 3A011H of 1
Air Covers O-rings Apply lithium-based grease. Lips must face out of housing. 11* Polypropylene Torque to 5-35 ft-lb. (3- N m). 111 Torque to 0-5 in.-lb (.3-. N m). 113* 1 11 11 5 11* 1* * 1* * * 3 11 ti1a Polypropylene s Ref. Description Qty. 1* U-CUP, center shaft 3 BOLT, hex head, /1-1 x.5, stainless steel 5 COVER, air HOUSING, center, not sold separately 1 * GASKET, air cover * SHAFT, center 1 * BEARING, shaft 1* VALVE, pilot, assembly 111 VALVE, air, see page 31 1 11* PIN, dowel, stainless steel 113* GASKET, air valve 1 Ref. Description Qty. 11 LUBRICANT, thread, not shown 1 11* NUT, serrated 11 SCREW, hi-lo stud 1 NUT, jam, /1, stainless steel 11 WASHER, /1, stainless steel * Included in Rebuild Kit. The center housing () is not sold separately. 3A011H of 1
Air Covers O-rings Rebuild Kits (*) Shaft Bearing Kits A01A, P01A K50 A01A, P01A, A01G, P01G K5 A01E K55 A01E K51 A01G, P01G K51 Kit includes: center shaft u-cups (1) center shaft bearings () center shaft u-cups (1) screws, M x 5, for A01x pumps () air cover gaskets () 1 center shaft () center shaft bearings () pilot valve assemblies (1) dowel pins (11) 1 air valve gasket (113) nuts, serrated, for P01x pumps (11) 1 grease packet Air Cover Kits A01x P01x 1 air cover (5) 1 air cover gasket () dowel pins (11) K K Pilot Assembly Kits Air Cover Bolt Kits A01A, P01A, A01G, P01G A01E A3 K Aluminum Polypropylene K K0 pilot valve assemblies (1) Aluminum Kit includes: bolts (3), /1-1 x.5 in. Shaft Kits A01A, P01A K5 Polypropylene Kit includes: bolts (3), /1-1 x.5 in. jam nuts (1) washers (11) A01E K50 A01G, P01G K53 Kit includes: center shaft u-cups (1) 1 center shaft () center shaft bearings () 3A011H of 1
Air Air Covers O-rings 0 1 3 Apply lithium-based grease. U-cup lips must face Apply lithium-based grease to contact surface. These parts are not used in air valve V31 05 3 1 3 1 1 11 1 03 13 1 0 1 0 0 1 0 1 0 01 1 0 1 0 ti15a Ref. Description Qty. 01 HOUSING, not sold separately 1 0 PISTON 1 03 DETENT PISTON ASSEMBLY 1 0 CAM, detent 1 05 PLATE, air valve 1 0 O-RING 0 CAP, end 0 U-CUP 0 SCREW RETAINING RING 11 DETENT SPRING 1 Ref. Description Qty. 1 BASE, cup 1 13 CUP 1 1 O-RING, cup 1 Parts included in Air Repair Kit. See page 31. Parts included in Air Seals Kit. See page 31. Parts included in Air End Cap Kit. See page 31. 30 3A011H of 1
Air Covers O-rings Air Seal Kits ( ) A01A, P01A, A01G, P01G A01E K5 K Kit includes: end cap o-rings (0) piston u-cups (0) screws, M3, shorter (0, for metal pumps) screws, #, longer (0, for plastic pumps) 1 air valve gasket (113) 1 grease packet 1 solenoid release button o-ring (not shown), used only with optional DataTrak kit. Air Repair Kits ( ) A01A, P01A, A01G, P01G K0 A01E K5 1 air valve piston (0) 1 detent piston assembly (03*) 1 detent cam (0*) 1 air valve plate (05) end cap o-rings (0) piston u-cups (0) screws, M3, shorter (0, for metal pumps) screws, #, longer (0, for plastic pumps) 1 detent spring (11*) 1 air cup base (1) 1 air cup (13) 1 air cup o-ring (1) 1 solenoid release button o-ring (not shown), used only with optional DataTrak kit. 1 air valve gasket (113) 1 grease packet Air Replacement Kits A01A, A01G K55 A01E K P01A K5 P01G V31 1 air valve assembly (1b) 1 air valve gasket (113) screws (; models with aluminum centers) OR nuts (11; models with plastic centers) Air End Cap Kits ( ) A01x A31 P01x C053 end caps (0) retaining rings () o-rings (0) NOTE: If you have the optional DataTrak on your pump, see Accessories, page 3, for Air Replacement kits. *Not used in air valve V31, for models with PTFE overmolded diaphragms. 3A011H 31 of 1
Covers Air Covers O-rings Cover Kits A1, A K1 P1 K3 S1, S K Manifold Kits A1 K P1 K0 S1 K A K S K0 ti00a ti03a tia 1 fluid cover () ti0a ti05a ti3a 1 manifold center (5) Outlet Manifold Elbow Kits A1, A K5 P1 K S1, S 1 outlet manifold elbow (3) Inlet Manifold Elbow Kits A1, A K P1 K S1, S K ti1a ti0a tia K3 Manifold Fastener Kits A1, A K P1 K1 S1, S K5 Aluminum kit includes: bolts (), hex head with flange base, 3/-1 x 1.5 in., zinc-plated carbon steel Polypropylene kit includes: bolts (), hex head, 1/-13 x.5 in., stainless steel 1 washers () nuts () Stainless steel kit includes: clamps (a), in., tri-clamp gaskets (b), in., PTFE ti01a ti0a ti30a 1 inlet manifold elbow () 3 3A011H 11 of 1
Air Covers O-Rings Manifold to Cover Fastener Kits A1, A K5 P1 K3 S1, S K Aluminum kit includes: bolts (), hex head with flange base, 1/-13 x 1.5 in., zinc-plated carbon steel Polypropylene kit includes: 1 bolts (), hex head, 1/-13 x in., stainless steel 3 washers, 1/ in., stainless steel 1 nuts, 1/ in., stainless steel Stainless steel kit includes: bolts, hex head, 1/-13 x 1.5 in., stainless steel washers, 1/ in., stainless steel nuts, 1/ in., stainless steel Cover to Air Cover Fastener Kits A1, A K P1, with poly center K P1, with aluminum center K5 S1, S, with poly center K S1, S, with aluminum center K Aluminum kit Includes: 1 bolts (3 3), hex head with flange, 1/-13 x in., zinc-coated carbon steel Polypropylene with Poly kit includes: bolts (3), hex head, 1/-13 x in., stainless steel bolts (3, hex head, 1/-13 x.5 in., stainless steel 0 washers (), stainless steel nuts (), hex, stainless steel Polypropylene with Aluminum kit includes: bolts (3), hex head, 1/-13 x 3.5 in., stainless steel bolts (3), hex head, 1/-13 x.5 in., stainless steel 1 washers (), stainless steel Stainless Steel with Aluminum Kit includes: bolts (3), hex head, 1/-13 x 1.5 in., stainless steel bolts (3), hex head, 1/-13 x.5 in., stainless steel 1 washers (), stainless steel Stainless Steel with Polypropylene Kit includes: 1 bolts (3 3), hex head, 1/-13 x.5 in., stainless steel 0 washers (), stainless steel nuts, hex, 1/ in., stainless steel 3A011H 33 1 of 1
Seats Check Balls Air Covers O-Rings Seat Kits AC* AL* BN FK GE* PP* SP* SS* TP K K K30 K3 K31 K33 K3 K35 K3 Check Ball Kits AC K3 BN K3 CR K1 CW K FK K5 GE K3 PT K3 SP K TP K0 seats (), material indicated in table * These seats require o-rings, which are sold separately. See page 3. NOTE: Some kits may not be available for your model. See the selector tool at www.graco.com or speak with your distributor. Kits Include: balls (11), material indicated in table NOTE: Some kits may not be available for your model. See the selector tool at www.graco.com or speak with your distributor. 3 3A011H 13 of 1
. Graco Husky 3300 Diaphragms Air Covers O-Rings NOTE: Some kits may not be available for your model. See the selector tool at www.graco.com or speak with your distributor. Stard Diaphragm Kits BN K CR K0 FK K03 GE K00 SP K0 TP K01 diaphragms (0, material indicated in table) o-rings (1) for the bolt (used only on metal pumps) 1 diaphragm install tool (30), not included with rubber diaphragms NOTE: Diaphragm plates (1, 15), washer () diaphragm shaft bolts (1) are sold in separate kits. See page 3. The shaft () is part of Kit K50, the Rebuild Kit. Overmolded Diaphragm Kits CO K PO K overmolded diaphragms (0, material indicated in table) diaphragm set screws, stainless steel (1) 1 diaphragm install tool (30) I Loctite packet NOTE: Air plates (1) washer () are sold in a separate kit. See page 3. The shaft () is part of Kit K51, the Rebuild Kit. NOTE: Air Replacement Kit V31 is recommended for use with PTFE Overmolded diaphragm for maximum diaphragm life. See Air Replacement Kits, page 31. 1 0 15 30 (not to scale) 1 1 (Metal pumps) 15 (Plastic pumps) ti11a 1 30 (not to scale) 1 0 ti13a 3A011H 35 1 of 1
Diaphragms (continued) Air Covers O-Rings Two-Piece Diaphragm Kits PT K05 diaphragms (0), PTFE backup diaphragms (305), Santoprene o-rings for the bolt (1, used only on metal pumps) 1 diaphragm install tool. NOTE: Diaphragm plates (1, 15), washer () diaphragm shaft bolts (1) are sold in separate kits. See page 3. The shaft () is part of Kit K50, the Rebuild Kit. 1 305 0 15 1 1 15 (Metal pumps) (Plastic pumps) ti1a Plate Kits 3300A K0 3300P K0 3300S K0 Kits for aluminum stainless steel pumps include: 1 fluid side diaphragm plate (15) 1 washer () 1 o-ring (1) 1 bolt (1) Kits for polypropylene pumps include: 1 air side diaphragm plate (1) 1 fluid side diaphragm plate (15) 1 washer () Air Plate Kits All Models K5 1 air side diaphragm plate (1) 1 washer () 1 o-ring (1) 30 (not to scale) 3 3A011H 15 of 1
Manifold Seat Seals Manifold Seal Kits Air Aluminum Poly s Stainless Steel s PT K K BN K0 not available FK K1 Covers O-Rings Kits for Aluminum or Polypropylene pumps include: o-rings () 1 grease packet Kit for Stainless Steel pumps includes: gaskets () Seat O-Ring Kits PT BN FK K K0 K Kit Includes: o-rings (13) Mounting Bracket Kits Aluminum Polypropylene Stainless Steel K3 K Kit Includes: mounting brackets (3) bolts () nuts () washers (), polypropylene or stainless steel pumps 3A011H 3 1 of 1