MOL HYDRO HYDRAULIC OILS EXTRA CLEANLINESS, MORE EFFICIENT OPERATION
EFFICIENT SOLUTIONS FOR ALMOST ALL APPLICATIONS Your hydraulic system achieves its maximum productivity when it gets the right lubricants, providing extra cleanliness and. IMPROVED SYSTEM CLEANLINESS Increase the lifetime of your filter and your operational efficiency, and ensure reliable operation using MOL Hydro hydraulic oils! Our products meet not just the DIN and Bosch Rexroth RE90235 cleanliness requirements, but our own, even stricter limits. They help prevent valve sticking and filter clogging through their excellent deposit control. MOL HYDRO OFFERS EXTRA CLEANLINESS 1000 PARTICLES/100 ML 65 60 55 50 45 40 35 30 25 20 15 10 5 1000 PARTICLES/100 ML 500 400 300 200 50 1000 PARTICLES/100 ML 2000 1800 1600 1400 1200 1000 800 600 400 200 >14 MICRON >6 MICRON >4 MICRON DIN 51524 and Bosch Rexroth RE90235 (by ISO 4406:1999 cleanliness) max. 21/19/16 MOL Hydro HLPD AL KM (by ISO 4406:1999 cleanliness) max. 18/15/11 MOL Hydro HME 46 HP (by ISO 4406:1999 cleanliness) max. 17/15/12 OUTSTANDING WEAR PROTECTION Due to their well-balanced additives, MOL Hydro hydraulic oils provide excellent wear for pumps, valves, cylinders, etc. over a wide temperature range and even in equipment exposed to heavy loads at high pressure. Thanks to this protective property, they extend pump life and decrease maintenance! EXTRA WEAR PROTECTION FOR LONGER LIFE WEIGHT LOSS, MG 150 100 50 In the conventional vane pump test MOL Hydro HM AL resulted in minimal wear. Eaton Vickers V104C pump test Vane+ring wear total
LONG OIL DRAINS Extend oil life with MOL Hydro products, which help you optimise operations and maintain maximum cost efficiency. Our oils offer more than double the industrial average, even without the need for a new load. Regular LubCheck oil diagnostics can extend this period even longer. SYSTEM EFFICIENCY, HIGH PERFORMANCE Our oils provide top performance due to their extremely good filterability, even in the presence of a small amount of water, in a wide range of industrial and mobile hydraulic systems operating under severe conditions. MOL hydraulic oils are formulated to ensure excellent thermal and hydrolytic stability, which results in less sludge formation and deposits on servo valves and actuators. They are compatible with fine filtration, due to their outstanding filterability, which is essential in modern hydraulic systems. OUR SERVICES MOL LUBCHECK OIL AND MACHINE DIAGNOSTICS OPTIMISE YOUR OPERATIONAL COST EFFICIENCY Regular oil analysis helps quantify oil deterioration and identify any possible damage to your hydraulic system before it results in any serious production losses and maintenance. The LubCheck diagnostic system also helps to define the optimal oil change interval. The MOL LubCheck laboratory has been a member of WearCheck International since 1997. Our LubCheck services are covered in separate brochures. LUBRICATION TECHNOLOGY CONSULTING Our team of experts will be pleased to help you with any questions or issues related to lubrication. With many years of experience, we will be able to advise you in relation to hydraulic oils, including the selection of the best product for a specific technology or a technical problem. We will test the selected products under actual operating conditions and our development laboratory will then adjust the product parameters to your individual needs.
MOL HYDRAULIC OILS MOL HYDRO HM AL MOL Hydro HM AL is a high-quality hydraulic fluid meeting the requirements of the Denison HF-O specification, which is excellent for hydraulic systems operating at high pressure and under heavy operating conditions or at low temperatures (pumps, servo system). It s also recommended for use in hydraulic systems in machinery (tools in the plastic industry, in turbo screws and vane compressors) and in circulation systems. MOL HYDRO HME SERIES The MOL Hydro HME series are premium-quality hydraulic fluids meeting the requirements of the Denison HF-O specification for industrial and mobile applications. excellent performance even under heavy loads increased equipment life and decreased maintenance resistance, its anti-wear performance close to that of gear oils (FZG 12) zinc, calcium, silicon free excellent thermal and hydrolytic stability, oxidation resistance extremely good filterability, even in the presence of a small amount of water high cleanliness long equipment life exceeding performance than conventional zinc containing hydraulic oils extended service life stick-free operation of servo and control valves, low deposit formation more efficient and high cleanliness MOL HYDRO HME HP It is a premium-quality, high purity (ISO cleanliness: 17/15/12), zinc-based hydraulic fluid for hydraulic systems in the plastic industry, servo systems and machines under high-pressure. strong anti-wear properties extra purity more efficient operation long hydraulic system life which lowers maintenance It can be filled in without extra prefiltering. MOL HYDRO HM SERIES These are general-purpose hydraulic work fluids exceeding the ISO HM requirements and providing reliable performance for a wide range of industrial and mobile hydraulic equipment. efficient wear low deposit formation improved equipment life and lower maintenance long oil-drain intervals high cleanliness more efficient and
MOL HYDRO HV SERIES MOL Hydro HV series are multigrade hydraulic oils with performances substantially exceeding ISO HV requirements. Due to their outstanding thermal and mechanical stability, they are excellent for outdoor applications, in hydraulic systems operating in a wide temperature range. outstanding thermal and mechanical stability lower deposit formation longer equipment life and lower maintenance in high and low temperatures, even under heavy loads long drain intervals MOL HYDRO ARCTIC A premium quality MOL Hydro Arctic ensures optimum lubrication and in extreme environments and widely fluctuating temperatures. excellent low temperature properties for cold start-up of hydraulic systems outstanding thermal and hydrolytic stability MOL HYDRO HLPD no or minimal heating of the system is required, saving start-up time, operating and energy consistently high performance even in an environment with widely fluctuating temperatures Premium quality detergent hydraulic fluid containing a zinc based additive for outdoor mobile applications and CNC machines. powerful detergent effect lower sticky residues and deposits MOL HYDRO HLPD-AL A high purity, ash-free hydraulic oil, MOL Hydro HLPD- AL provides consistently high performance, even in an environment affected by water and dust and in industrial and mobile hydraulic systems working under heavy load conditions. outstanding ISO cleanliness (max. 17/15/12) excellent against wear even at high loads and low speeds (Brugger value >50 N/mm 2 ). Its anti-wear performance is close to that of gear oils (FZG 12). Its balanced additive system does not contain zinc, calcium, silicon. It prevents jamming of system elements. There isn t need for any extra filtration before filling. longer equipment life appropriate cleanliness of equipment, reduced environmental impact long equipment life and lower maintenance
OUR WIDE PORTFOLIO OFFERS SOLUTIONS FOR ALMOST ALL NEEDS PRODUCT NAME CLASSIFICATION TECHNOLOGY GRADE ISO VISCOSITY GRADES SPECIFICATIONS AND APPROVALS SPECIAL FEATURES MOL Hydro HM AL MOL Hydro HM 46 AL Extra Zn-free, ashless Premium 22-32-46-68 Special 46 Parker Denison HF-0, Cincinnati, Bosch Rexroth, ENGEL, Eaton-Vickers and many other OEMs, Bosch Rexroth, US Steel, SEB, Long life, extra, FZG 12 Special anti-wear: Brugger ~35 N/mm 2, FZG 12 extra cleanliness: max.18/16/13 MOL Hydro HME ISO: HM DIN: HLP Zn-based Premium 10-15-22-32-46-68-100 Parker Denison HF-0, Cincinnati, Bosch Rexroth, ENGEL, Eaton-Vickers and many other OEMs MOL Hydro HM Standard 22-32-46-68 MOL Hydro HME 46 HP Special 46 Parker Denison HF-0, Cincinnati, Bosch Rexroth, ENGEL, Eaton-Vickers and many other OEMs MOL Hydro HM 46 CONT 46 Long life, extra, FZG 11 better value vs price ratio FZG 10 HME with improved cleanliness: max.17/15/12 FZG 11 HM with improved cleanliness: max.18/16/13 FZG 10 MOL Hydro HV Premium 15-22-32-46-68-100 Parker Denison HF-0, Bosch Rexroth, Eaton-Vickers and many other equipment manufacturers ISO 11158, DIN 51524-3 MOL Hydro HVLP Zn-based ISO: HV DIN: HVLP Standard 32-46 ISO 11158, DIN 51524-3 HME with viscosity index ~150 FZG 11 better value vs price ratio FZG 10 MOL Hydro HV Extra 15 exceeds ISO 11158, DIN 51524-3 higher viscosity index (270) Special MOL Hydro Arctic Zn-free 32 exceeds ISO 11158, DIN 51524-3 viscosity index>300 MOL Hydro HLPD Zn-based Premium 32-46-68 detergent function, FZG 11 MOL Hydro HLPD AL DIN: HLPD Zn-free, ashless Premium 46 MOL Hydro HLPD AL KM Special 46 MOL Hydro HVD DIN: HVLPD Zn-based Premium 46 Mueller Weingarten Mueller Weingarten, Krauss Maffei ISO 11158, DIN 51524-3 special anti-wear: Brugger >50 N/mm 2, FZG 12 extra cleanliness: max.17/15/12 as HLPD 46AL with improved air release: LAV max. 6 extra cleanliness: max.18/15/11 FZG 12 HV with detergent function Corrosion Enhanced lifetime Wear Operation in wide temperature range Detergent/dispergent function APPROVALS AND CLAIMS WILL VARY BY VISCOSITY GRADE. FOR PROPER LUBRICANT SELECTION, FULL DETAILS ON THEIR APPROVALS AND SPECIAL PRODUCTS, PLEASE CONTACT OUR EXPERTS. HM/HLP HV/HVLP HLPD HVLPD Zn-free, ashless: VI (Viscosity Index): Detergent performance: Parker Denison HF-0: Mueller Weingarten, Brugger-test: longer lifetime, better anti-wear performance, better stability, lower environmental impact (e.g. in wastewater) wider application range, minimized temperature dependence contamination control, jamming of system elements can be eliminated, ensures appropriate cleanliness of system the highest performance level of mineral oil-based hydraulic oils, over a longer lifetime excellent against wear, even at high load / low speed conditions
Our lubricant services: A Lubrication technology consulting A LubCheck oil and machine diagnostics A On-site lubricant maintenance A Lubrication assessment A Lubrication technology audit A Fluid management A Training courses YOUR PARTNER: