Inspired By Challenge Three piece ball valves
Floating Valves General Fire safe Graphite-free fire-safe Ordering code system Introduction Habonim -piece ball valves 7 series Habonim line of -piece ball valves is engineered for endurance and meet the most demanding industrial and international standards. The 7 series, is designed and manufactured for applications with high-flow capacity and tight shutoff, to ensure reliability and functionality. The -piece body construction allows for in-line maintenance and replacement of internal parts. Its sturdy construction is in compliance with ANSI B. (wall thickness) and API D standards. Technical summary 7 Series Standard and full port Size range ¼"- " (DN8 - DN0) Pressure range ANSI Class 900 Vacuum 0 - Tor to bar (0 psi) Size range /"-" (DN - DN0) Pressure range ANSI Class 00 Vacuum 0 - Tor to 70 bar (000 psi) Temperature range -0 C to +0 C (-7 F to +00 F) Materials Stainless steel A CF8M, carbon steel A WCB, bronze, alloy C, alloy C7, duplex, super duplex, SMO, inconel, monel 00, titanium and more End connections Threaded, welded, flanged Operation Lever or gear operated, pneumatic or electric actuated Service Chemical, petrochemical, oil and gas, energy, pulp & paper and others Standards of compliance Factory certification ISO 900:0 Quality management system Valve design & tests ASME B. :0 Valve design API D / ISO :007 ISO79 :00 ANSI B.0. :0 NPT - National Pipe Taper thread EN 0- :00, ISO 7- :007, JIS B00 :999 BSPT - British Standard Pipe Taper thread DIN8:0 BSPP ANSI B.:0, EN 70:0 Socket weld end connection ASME B.-07, EN7:999 Buttweld end connection (schedule, 0, 0, 80) ASME B.:07, EN 09 -:997 Flange dimensions ASME B.0:07, EN 8:07 Face-to-Face dimensions NACE MR-07 :0/ISO - :0 Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments NACE MR00/ISO 79 :0 Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments EN - :0, API 98 :0 Testing of metallic valves - pressure tests, test procedures and acceptance criteria API 07 :0, ISO 097 :00 Testing of valves - fire type-testing requirements ISO 88-:0 Industrial valves - measurement, test and qualification procedures for fugitive emissions Certifications PED 0/8/EU Module H Pressure equipment directive ATEX 0//EU Equipment and protective systems intended for use in potentially explosive atmospheres (optional for actuated unit only) IEC 08-/ :00 SIL/ Safety integrity level - functional safety of electrical/ electronic/ programmable electronic safety-related systems (optional for actuated unit only) Documentation EN 00 :00././. Metallic materials - types of inspection documents
General Habonim standard valves that include the stem seal have passed the rigorous test dictated by ISO 88- with great success. Third party certifications for the complete standard product line are published on the Habonim website. The stem seal is named for its distinctive X shaped design. The flexible X shape creates a dynamic sealing arrangement that allows the stem seal to adjust itself as pressure builds. In the event of pressure buildup or side load, the stem seal dynamically adjusts to prevent fugitive emissions, making a superior design compared with the conventional flat stem seals currently available in the market. The stem seal also includes a tough thrust bearing (CF PEEK by default) located between the stem and the valve body, and an anti-abrasion ring (CF PEEK by default) located between the soft stem seal and the stainless steel follower. Both elements minimize erosion and loss of preload, thus keeping the stem components in their original condition and extending their service life above 00,000 cycles. Stem Stem seal Seals Seats Ends Design features Body Three piece design Forged or cast body Full compliance with ASME B. (wall thickness) and API D Easily serviced in-line with swing-out body Large range of end connections for full or standard port valves Rugged top mounting ISO compliant platform for easy mounting of actuator and other accessories Carbon steel valves are black oxidized to MIL-DTL-9 standard or available in epoxy paint finish upon request Stainless steel and high alloy valves provided with natural finish Steam jacket - upon request Mirror polished solid ball Bidirectional as standard High flow capacity with low pressure drop at full opening Floating ball concept for positive shutoff Pressure equalizing hole in the stem slot Stem One piece solid stem Blowout proof design Antistatic device Fire lip Stem seal ISO 88- certified High endurance up to 00 thousand cycles Anti-abrasion mechanism Live loaded Seats and seals Flexible seat design Reduced wear Low torque Rate A leakage tightness Self-relief seats (SRS) - upon request Handle Rigid handle indicating flow direction Optional locking devices Body
Floating Valves General Fire safe Graphite-free fire-safe Ordering code system Graphite-free fire-safe stem seal Continuous development of the technology led to Habonim s revolutionary graphite-free fire-safe stem seal design. A polymer stem seal and a unique trim construction hold the stem aligned and preloaded even after a fire. The stem seal is well-suited for use in hazardous industries such as chemical, petrochemical and oil & gas, where it improves the performance of the valve stem seal up to 00,000 cycles compared to conventional porous graphite fire-safe stem seals. The fire-safe valve offers the ultimate solution with its exclusive graphite-free stem seal that eliminates the risk of graphite disintegration even after prolonged stem wear, protecting both line materials and air quality. Durable polymer anti-abrasion ring TF slide bearing stem seal Durable polymer thrust seal Tongue & groove design One size up short bolts minimizes thermal expansion Unique design features Encapsulated graphite body seal Fugitive emission certified to ISO 88- Fire safe design to API 07 and ISO 097 Habonim design Patent No. D98,988 Designed to operate for 00,000 cycles without refurbishment Prevents media contamination from graphite particles Ensures uninterrupted production Increases site safety
General Graphite-free fire-safe valve A premium line of products based on the fire safe technology. This unique fire safe valve design includes a graphite-free stem seal consisting of a virgin PEEK thrust bearing and anti-abrasion ring, and stem seal made of TFM material. Both virgin PEEK and TFM are FDA approved. A double body seal set is comprised of an internal PTFE body seal facing the media, and an external graphite seal to withstand the fire. This configuration effectively isolates the graphite secondary seal in a dry cavity, preventing it from coming into contact with the media, ensuring a high level of purity for high-value media. FDA approved Virgin PEEK thrust seal stem seal Secondary graphite seal Primary PTFE seal FDA approved seat material Tongue & Groove design Unique design features FDA approved Virgin PEEK anti-abrasion ring Prevents media contamination from graphite particles FDA approved polymer materials Animal Derivative Free (ADF) assembly Ensures uninterrupted production Fugitive emission certified to ISO 88- Fire safe design to API 07 and ISO 097 Cleaned, assembled and packed for Biopharma / API service Designed to operate for 00,000 cycles without refurbishment Increases site safety Self-Relieving Seats (SRS) - upon request Habonim design Patent No. D98,988
Floating Valves General Fire safe Graphite free - fire safe Ordering code system Size/ - / DN8-DN Class 900 () 7X/7P () Series Valve dimensions S H D C ø port B A Preparation for actuation P P W ½, ¾ & ½ without nut - with nut TxL thread F PCD M Stem flats show valve ball position N thread Std. port Full port Unit port Weight Kv A B C D H S W M N P F TxL kg/ib Cv. (F0).00 0.0. MX0 DN8 mm..00 0.0 9.00 7.9.0 0.00 7.00. /8 /" inch 0..0 0.8..9..9.8 0. 0....0 DN DN0 mm..00 0.0 9.00 7.9.0 0.00 7.00. /8. (F0).00 0.0.9 MX0 /" /8" inch 0..0 0.8..9..9.8 0. 0... 8.0 DN0 DN mm.0 70.0.0.0 0.0.90 0.00.70. /8. (F0).00 0.80 0 MX0 /" /" inch 0..78 0.97..9..9. 0. 0...77 DN DN0 mm 0.0 9.70.70 8.0.0 79.0 7.00.70 7. 7/ 7.0 (F0).00.0 8 MX0 " /" inch 0.8.9..0.9. 7.. 0.0 0.9.. DN DN mm.0 08.00.0.70 0.0 8.0 7.00 7.70 7. 7/ 7.0 (F0).00.0 9 MX0 /" " inch.00...8.7. 7..8 0.0 0.9.. 7 DN0 DN mm.80.0 8.0.0 7.00 97.00 7.00 8.70 8.7 9/ 8.0 (F0) 0.00.0 9 MX /" /" inch...9.7.87.8 9.. 0. 0..97 7.9 80 DN0 DN0 mm 8.0.00.0 8.0 77.80 0.80 7.00 9.90 8.7 9/ 8.0 (F0) 0.00.0 0 MX " /" inch.0.0..90.0.0 9..8 0. 0..97 9.9 DN DN0 mm 0.80 8.00 7.0 70.00 88.0.0 7.00 08.00 8.7 9/.0 (F07) 70.00 9.0 08 M8X /" " inch.00..8.7.7. 9.. 0. 0..7.00
Size/ - / DN8-DN Class 900 () 7X/7P () Series Components & materials 7 0 7a 9 8 9 A A 7 0 Body A CF8M, A WCB, A0, A CN7M, A9 M-, A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A Ends A CFM, A WCB, A0, A CN7M, A9 M-, A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A A CF8M, B7 N0800, B N000, B7 N00, B7 N07, A79 S, A79 S0, A79 S70 Stem A79 L, A Gr.0 H0D 7-PH, B7 N0800, B N000, B7 N00, B7 N07, A79 S, A79 S0, A79 S70 * Seat PTFE, RPTFE, CF PTFE, PEEK, CF PEEK, TFM, UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F) * Body seal PTFE, RPTFE, UHMWPE, Graphite Support ring A79 L, B7 N0800, B N000, B7 A*** N00, B7 N07, A79 S, A79 S0, A79 S70 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin A8 0 () 7P Series is Habonim's standard valve design without the stem seal construction. () This material can only be used as part of the 7P design. () ½" (DN) size maximum pressure rating is Class 00. 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower B78 L, B N000 Disc spring A9 7-7PH Stem nut EN0- A-80, A9 Gr 8M Locking clip A7 0 Handle C.St. A9 G000 zinc plated, A0 0 Serrated washer A0 0 Handle nut A9 Gr 8M, EN0- A-80 7 Sleeve PVC Body bolt EN 0- A-70 / A-80, A9 Gr B8, ISO 898- Gr 8.8 zinc plated, A9 Gr B7 zinc plated, A0 Gr A7 zinc plated 9 Body nut EN 0- A-80, A9 Gr 8M, ISO 898- Gr 8 zinc plated, A9 Gr H zinc plated 0 Anti-static spring A 0 Anti-static plunger A79 0 Tag (not shown) A7 0 * Repair kit components ** Only with stem seal *** Only with graphite body seal 7
Floating Valves General Fire safe Graphite free - fire safe Ordering code system Size - DN80-DN0 Class 00 7X/7P () Series Valve dimensions S H D C ø port B A Preparation for actuation P ø W Stem groove shows valve Q M ball position M N thread N thread M TxL thread F PCD DD Square Std. Full Unit Weight Kv A B C D H S W M M-DD N P Q F TxL port port port kg/lb Cv DN80 DN mm.0 9.00 8.0 98.0.90.00 00.00 0.00.90.90 "-.70.70 (F0) 0.00.70 00 M0x0 " /" inch.0..8.87.7 7.9.7.0 0.7 0. UNS-A 0. 0.89.0 0.0 8 DN00 DN80 mm 8.0.00 08.80.0 0.70 00.00 00.00 77.00.90.90 "-.70.70 (F0) 0.00.70 M0x0 " " inch. 8..8.9. 7.89..97 0.7 0. UNS-A 0. 0.89.0.0 7 DN00 mm 00.00 9.00.00.00 70.0.00 00.00 7.00.90.90 "-.70.70 (F0) 0.00 0.00 7 M0x0 " inch.9 9..8.88.7 8.0. 8. 0.7 0. UNS-A 0. 0.89.0.0 8 DN0 mm.0.00.00 7.00.00 8.00 9.00.00 8..7 ½"-.0.0 (F).00.00 87 Mx0 " inch.7..7. 8.90..0 0.7. 0.9 -A.0.9.9 8.90 0 8
Size - DN80-DN0 Class 00 7X/7P () Series Components & materials 7 B A 0 7a 9 8 9 A 7 Preparation for actuation 0 Body A CF8M, A WCB, A CN7M, A9 M-, A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A " Ends A CFM, A WCB, A0, A CN7M, A9 M-, A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A " A CF8M, B7 N0800, B N000, B7 N00, B7 N07, A79 S, A79 S0, A79 S70 Stem A79 L, A Gr.0 H0D 7-PH, B7 N0800, B N000, B7 N00, B7 N07, A79 S, A79 S0, A79 S70 * Seat PTFE, RPTFE, CF PTFE, PEEK, CF PEEK, TFM, UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F) * Body seal PTFE, RPTFE, UHMWPE, Graphite A Support ring A CFM, A WCB, A0, A CN7M, A9 M-,A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A " 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin A8 0 () 7P Series is Habonim's standard valve design without the stem seal construction. () This material can only be used as part of the 7P design. 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower B78 L, B N000 Disc spring A9 7-7PH Stem nut C.st B ZP Tab lock washer A0 0 Handle C.St. zinc plate, A0 L A Stop plate C.St..00 zinc plate, A0 0 B Wrench head Ductile iron A Gr. --, A WCB, A CF8M Wrench bolt EN0- A-70/A-80, A9 Gr B8/B8M 7 Sleeve PVC Body bolts EN 0- A-70 / A-80, A9 Gr B8, ISO 898- Gr 8.8 zinc plated, A9 Gr B7 zinc plated, 8- A0 Gr A7 zinc plated 9 Body nut EN 0- A-80, A9 Gr 8M, ISO 898- Gr 8 zinc plated, A9 Gr H zinc plated 8-0 Anti-static spring A 0 Anti-static plunger A79 0 Tag (not shown) A7 0 * Repair kit components ** Only with stem seal 9
Floating Valves General Fire safe Graphite free - fire safe Ordering code system Size/ - / DN8-DN Class 900 () F7W/F7P () Series Valve dimensions S H D C ø port B A Preparation for actuation P P ø W ½, ¾ & ½ without nut - with nut M Stem flats show valve ball position TxL thread F PCD N thread Std. port Full port Unit port Weight Kv A B C D H S W M N P F TxL kg/lb Cv. (F0).00 0.0. MX0 DN8 mm..00 0.0 9.00 7.90.0 0.00 7.00. /8 /" inch 0..0 0.8..9..9.8 0. 0....0 DN DN0 mm..00 0.0 9.00 7.90.0 0.00 7.00. /8. (F0).00 0.0.9 MX0 /" /8" inch 0..0 0.8..9..9.8 0. 0... 8.0 DN0 DN mm.0 70.0.0.0 0.0.90 0.00.70. /8. (F0).00 0.80 0 MX0 /" /" inch 0..78 0.97..9..9. 0. 0...77 DN DN0 mm 0.0 9.70.70 8.0.0 79.0 7.00.70 7. 7/ 7.0 (F0).00.0 8 MX0 " /" inch 0.8.9..0.9. 7.. 0.0 0.9.. DN DN mm.0 08.00.0.70 0.0 8.0 7.00 7.70 7. 7/ 7.0 (F0).00.0 9 MX0 /" " inch.00...8.7. 7..8 0.0 0.9.. 7 DN0 DN mm.80.0 8.0.0 7.00 97.00 7.00 8.70 8.7 9/ 8.0 (F0) 0.00.0 9 MX /" /" inch...9.7.87.8 9.. 0. 0..97 7.9 80 DN0 DN0 mm 8.0.00.0 8.0 77.80 0.80 7.00 9.90 8.7 9/ 8.0 (F0) 0.00.0 0 MX " /" inch.0.0..90.0.0 9..8 0. 0..97 9.9 DN DN0 mm 0.80 8.00 7.0 70.00 88.0.0 7.00 08.00 8.7 9/.0 (F07) 70.00 9.0 08 M8X /" " inch.00..8.7.7. 9.. 0. 0..7.00 0
Size/ - / DN8-DN Class 900 () F7W/F7P () Series Components & materials 7 0 0A 7a 9 8 7 0 Body A CF8M, A WCB, A0, A CN7M, A9 M-, A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A Ends A CFM, A WCB, A0, A CN7M, A9 M-, A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A A CF8M, B7 N0800, B N000, B7 N00, B7 N07, A79 S, A79 S0, A79 S70 Stem A79 L, A Gr.0 H0D 7-PH, B7 N0800, B N000, B7 N00, B7 N07, A79 S, A79 S0, A79 S70 Seat PTFE, RPTFE, CF PTFE, PEEK, CF PEEK, TFM, * UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F) * Body seal Graphite 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a* Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () () This material can only be used as part of the 7P design. () ½" (DN) size maximum pressure rating is Class 00. () F7P Series is Habonim's firesafe valve design without the Graphite free stem seal construction. 8 Stop pin A8 0 9* Stem seal CF PTFE, TFM,Graphite () 0 Follower B78 L, B N000 0A* Slide bearing TF Disc spring A9 7-7PH Stem nut EN0- A-80, A9 Gr 8M Locking clip A7 0 Handle C.St. A9 G000 zinc plated, A0 0 Serrated washer A0 0 Handle nut A9 Gr 8M, EN0- A-80 7 Sleeve PVC Body bolt EN 0- A-70 / A-80, A9 Gr B8, ISO 898- Gr 8.8 zinc plated, A9 Gr B7 zinc plated, 8 A0 Gr A7 zinc plated 0 Anti-static spring A 0 Anti-static plunger A79 0 Tag (not shown) A7 0 * Repair kit components
Floating Valves General Fire safe Graphite free - fire safe Ordering code system Size - DN80-DN0 Class 00 F7W/F7P () Series Valve dimensions S D C H ø port Preparation for actuation B A P ø W Stem groove shows valve Q M ball position M N thread N thread M TxL thread F PCD DD Square Std. Full Unit Weight Kv A B C D H S W M M-DD N P Q F TxL port port port kg/lb Cv DN80 DN mm.0 9.00 8.0 98.0.90.00 00.00 0.00.90.90 "-.70.70 (F0) 0.00.70 00 M0x0 " /" inch.0..8.87.7 7.9.7.0 0.7 0. UNS-A 0. 0.89.0 0.0 8 DN00 DN80 mm 8.0.00 08.80.0 0.70 00.00 00.00 77.00.90.90 "-.70.70 (F0) 0.00.70 M0x0 " " inch. 8..8.9. 7.89..97 0.7 0. UNS-A 0. 0.89.0.0 7 DN00 mm 00.00 9.00.00.00 70.0.00 00.00 7.00.90.90 "-.70.70 (F0) 0.00 0.00 7 M0x0 " inch.9 9..8.88.7 8.0. 8. 0.7 0. UNS-A 0. 0.89.0.0 8 DN0 mm.0.00.00 7.00.00 8.00 9.00.00 8..7 ½"-.0.0 (F).00.00 87 Mx0 " inch.7..7. 8.90..0 0.7. 0.9 -A.0.9.9 8.90 0
Size - DN80-DN0 Class 00 F7W/F7P () Series Components & materials B 7 A 8 0 0A 7a 9 A 7 0 Body A CF8M, A WCB, A CN7M, A9 M-, A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A Ends A CFM, A WCB, A CN7M, A9 M-, A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A A CF8M, B7 N0800, B N000, B7 N00, B7 N07, A79 S, A79 S0, A79 S70 Stem A79 L, A Gr.0 H0D 7-PH, B7 N0800, B N000, B7 N00, B7 N07, A79 S, A79 S0, A79 S70 * Seat PTFE, RPTFE, CF PTFE, PEEK, CF PEEK, TFM, UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F) * Body seal Graphite A Support ring A CFM, A WCB, A0, A CN7M, A9 M-, A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a* Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin A8 0 () This material can only be used as part of the 7P design. () F7P Series is Habonim's firesafe valve design without the Graphite free stem seal construction. 9* Stem seal CF PTFE, TFM,Graphite () 0 Follower B78 L, B N000 0A* Slide bearing TF Disc spring A9 7-7PH Stem nut C.st B ZP Tab lock washer A0 0 Handle C.St. zinc plate, A0 L A Stop plate C.St..00 zinc plate, A0 0 B Wrench head Ductile iron A Gr. --, A WCB, A CF8M Wrench bolt EN0- A-70/A-80, A9 Gr B8/B8M 7 Sleeve PVC Body bolts EN 0- A-70 / A-80, A9 Gr B8, ISO 898- Gr 8.8 zinc plated, A9 Gr B7 zinc plated, 8- A0 Gr A7 zinc plated 9 Body nut EN 0- A-80, A9 Gr 8M, ISO 898- Gr 8 zinc plated, A9 Gr H zinc plated 8-0 Anti-static spring A 0 Anti-static plunger A79 0 Tag (not shown) A7 0 * Repair kit components
Floating Valves General Fire safe Graphitefree fire-safe Ordering code system Size/ - / DN8-DN Class 900 () 7G Series Valve dimensions S H D C ø port B A Preparation for actuation P P ø W ½, ¾ & ½ without nut - with nut M Stem flats show valve ball position TxL thread F PCD N thread Std. port Full port Unit port Weight Kv A B C D H S W M N P F TxL kg/lb Cv. (F0).00 0.0. MX0 DN8 mm..00 0.0 9.00 7.90.0 0.00 7.00. /8 /" inch 0..0 0.8..9..9.8 0. 0....0 DN DN0 mm..00 0.0 9.00 7.90.0 0.00 7.00. /8. (F0).00 0.0.9 MX0 /" /8" inch 0..0 0.8..9..9.8 0. 0... 8.0 DN0 DN mm.0 70.0.0.0 0.0.90 0.00.70. /8. (F0).00 0.80 0 MX0 /" /" inch 0..78 0.97..9..9. 0. 0...77 DN DN0 mm 0.0 9.70.70 8.0.0 79.0 7.00.70 7. 7/ 7.0 (F0).00.0 8 MX0 " /" inch 0.8.9..0.9. 7.. 0.0 0.9.. DN DN mm.0 08.00.0.70 0.0 8.0 7.00 7.70 7. 7/ 7.0 (F0).00.0 9 MX0 /" " inch.00...8.7. 7..8 0.0 0.9.. 7 DN0 DN mm.80.0 8.0.0 7.00 97.00 7.00 8.70 8.7 9/ 8.0 (F0) 0.00.0 9 MX /" /" inch...9.7.87.8 9.. 0. 0..97 7.9 80 DN0 DN0 mm 8.0.00.0 8.0 77.80 0.80 7.00 9.90 8.7 9/ 8.0 (F0) 0.00.0 0 MX " /" inch.0.0..90.0.0 9..8 0. 0..97 9.9 DN DN0 mm 0.80 8.00 7.0 70.00 88.0.0 7.00 08.00 8.7 9/.0 (F07) 70.00 9.0 08 M8X /" " inch.00..8.7.7. 9.. 0. 0..7.00
Size/ - / DN8-DN Class 900 () 7G Series Components & materials 7 0 0A 7a 9 8 B B 7 0 Body A CF8M, A WCB, A0, A CN7M, A9 M-, A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A Ends A CFM, A WCB, A0, A CN7M, A9 M-, A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A A CF8M, B7 N0800, B N000, B7 N00, B7 N07, A79 S, A79 S0, A79 S70 Stem A79 L, A Gr.0 H0D 7-PH, B7 N0800, B N000, B7 N00, B7 N07, A79 S, A79 S0, A79 S70 * Seat TFM, PTFE, Virgin PEEK, PCTFE (KEL-F) * Primary body seal PTFE B* Secondary body seal Graphite 7* Stem thrust seal VIRGIN PEEK, PCTFE (KEL-F) 7a* Anti-abrasion ring VIRGIN PEEK, PCTFE (KEL-F) () ½" (DN) size maximum pressure rating is Class 00. 8 Stop pin A8 0 9* Stem seal CF PTFE, TFM 0 Follower B78 L, B N000 0A* Slide bearing TF Disc spring A9 7-7PH Stem nut EN0- A-80, A9 Gr 8M Locking clip A7 0 Handle C.St. A9 G000 zinc plated, A0 0 Serrated washer A0 0 Handle nut A9 Gr 8M, EN0- A-80 7 Sleeve PVC Body bolt EN 0- A-70 / A-80, A9 Gr B8, ISO 898- Gr 8.8 zinc plated, A9 Gr B7 zinc plated, 8 A0 Gr A7 zinc plated 0 Anti-static spring A 0 Anti-static plunger A79 0 Tag (not shown) A7 0 * Repair kit components
Floating Valves General Fire safe Graphite-free fire-safe Ordering code system Size - DN80-DN0 S Class 00 7G Series Valve dimensions H C ø port Preparation for actuation B P A W Stem groove shows valve Q M ball position M N thread N thread M TxL thread F PCD DD Square Std. Full Unit Weight Kv A B C D H S W M M-DD N P Q F TxL port port port kg/lb Cv DN80 DN mm.0 9.00 8.0 98.0.90.00 00.00 0.00.90.90 "-.70.70 (F0) 0.00.70 00 M0x0 " /" inch.0..8.87.7 7.9.7.0 0.7 0. UNS-A 0. 0.89.0 0.0 8 DN00 DN80 mm 8.0.00 08.80.0 0.70 00.00 00.00 77.00.90.90 "-.70.70 (F0) 0.00.70 M0x0 " " inch. 8..8.9. 7.89..97 0.7 0. UNS-A 0. 0.89.0.0 7 DN00 mm 00.00 9.00.00.00 70.0.00 00.00 7.00.90.90 "-.70.70 (F0) 0.00 0.00 7 M0x0 " inch.9 9..8.88.7 8.0. 8. 0.7 0. UNS-A 0. 0.89.0.0 8 DN0 mm.0.00.00 7.00.00 8.00 9.00.00 8..7 ½"-.0.0 (F).00.00 87 Mx0 " inch.7..7. 8.90..0 0.7. 0.9 -A.0.9.9 8.90 0
Components & materials B 7 Size - DN80-DN0 Class 00 7G Series A 8 0 0A 7a 9 A B B 7 0 Body A CF8M, A WCB, A CN7M, A9 M-, A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A Ends A CFM, A WCB, A CN7M, A9 M-, A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A A CF8M, B7 N0800, B N000, B7 N00, B7 N07, A79 S, A79 S0, A79 S70 Stem A79 L, A Gr.0 H0D 7-PH, B7 N0800, B N000, B7 N00, B7 N07, A79 S, A79 S0, A79 S70 * Seat TFM, PTFE, Virgin PEEK, PCTFE (KEL-F) * Primary body seal PTFE A Support ring A CFM, A WCB, A0, A CN7M, A9 M-, A9 CW-MW, A9 CX-MW, A CKMCuN, A99 CDMN A, A99 CEMN A B* Secondary body seal Graphite 7* Stem thrust seal VIRGIN PEEK, PCTFE (KEL-F) 7a* Anti-abrasion ring VIRGIN PEEK, PCTFE (KEL-F) 8 Stop pin A8 0 9* Stem seal CF PTFE, TFM 0 Follower B78 L, B N000 0A* Slide bearing TF Disc spring A9 7-7PH Stem nut C.st B ZP Tab lock washer A0 0 Handle C.St. zinc plate, A0 L A Stop plate C.St..00 zinc plate, A0 0 B Wrench head Ductile iron A Gr. --, A WCB, A CF8M Wrench bolt EN0- A-70/A-80, A9 Gr B8/B8M 7 Sleeve PVC Body bolts EN 0- A-70 / A-80, A9 Gr B8, ISO 898- Gr 8.8 zinc plated, A9 Gr B7 zinc plated, 8- A0 Gr A7 zinc plated 9 Body nut EN 0- A-80, A9 Gr 8M, ISO 898- Gr 8 zinc plated, A9 Gr H zinc plated 8-0 Anti-static spring A 0 Anti-static plunger A79 0 Tag (not shown) A7 0 * Repair kit components 7
Floating Valves General Fire safe Graphite-free fire-safe Ordering code system Ordering code system The HABONIM three piece ball valve identification code 7 8 9 0 7 9 0.. 0 0 F 7 W - A T / N P T Size Features Series Design Body / Ends / Stem Seat Seal End connections Special features Size Code inch mm 0 / 8 0 /8 0 0 / 07 / 0 0 / / 0 0 0 / 0 80 0 00 0 0 80 8 00 Features A Anti-Static F Fire safe B Full port High purity Class 0000 I assembly room Q Cavity filler seats R Flush tank Clean assembly for O O () service M Ammonia service K Chlorine service V Vacuum service Series ANSI #900 std. port up to " size 7 ANSI #00 for /" and above Design P Basic design X stem seal graphite-free W fire safe stem seal graphite-free G fire safe FDA compliant valve () 7G series is cleaned for O service as standard, no need for extra prefix () material only () Stem material only In some applications the available options above are limited to specific sizes please consult with Habonim for details Body / Ends Bronze B C800 C. steel A WCB / A0 R C. steel A LC 9 C. steel A LCB S. steel A CF8M / CFM 8 S. steel A CF8 7 Monel A9 M-- I Inconel A9 CW-MC A Alloy-0 A CN7M C Alloy-C7 A9 CW-MW W Alloy-C A9 CX-MW D Duplex A99 CDMN A K Super duplex A99 CEMN A S SMO A CKMCuN / Stem S. steel A79 \L 8 S. steel A79 0\0L M 7-PH A Gr 0 H0D I () Inconel A9 CW-MC Z () Inconel 7 B7 N077 7 Monel B N000 A Alloy-0 B7 N0800 C Alloy-C7 B7 N07 W Alloy-C B7 N00 D Duplex A79 S0 K Super duplex A79 S70 S SMO A79 S Seat A TFM C PCTFE K CF PEEK L Virgin PEEK P CF PTFE R % Glass filled RPTFE S VESPEL T PTFE U UHMWPE Y Delrin W PVDF Seal G Expanded graphite I Impregnated graphite R % glass filled RPTFE T PTFE U UHMWPE V Viton B NBR End connections Welded BW Buttweld schd. BW0 Buttweld schd. 0 BW Buttweld schd. 0 BW80 Buttweld schd. 80 XBW Extended buttweld schd. 0 SW Socket weld XSW Extended socket weld BWO Buttweld tube OD ETO Extended tube OD SWO Socket weld tube OD BWD Buttweld DIN 0 ETJ Extended Tube JIS FT Flush Tank adaptive plate FP Flush Pipe adaptive plate KLM Copper tube (Imperial) XYZ Copper tube (Metric) ETB Extended copper tube Threaded NPT ANSI B.0. - National Pipe Taper thread MNPT Male NPT BSPT EN 0- - British Standard Pipe Taper thread MBSPT Male BSPT EN 0- - British Standard DIN999 Pipe parallel thread EN 0- - British Standard DIN8 Pipe parallel thread AS0 SAE internal straight thread Clamp LL Compression fitting (Imperial) LM Compression fitting (metric) TC Tri-Clamp GR Graylock Flanged 0 ANSI B. #0 RF 00 ANSI B. #00 RF 00 ANSI B. #00 RF 900 ANSI B. #900 RF PN EN09 PN RF PN0 EN09 PN0 RF PN EN09 PN RF PN00 EN09 PN00 RF PN0 EN09 PN0 RF Special features RTJ Ring Type Joint Body made from B rolled bar EP Electropolished Jacketed valve - number of ports JN0 (), type (NPT) and size ( /") SRS Self relief seat with upstream P0 pressure relief hole with LTPN PN surface treatment R DD stem Internal surface G.. finish (G, G) 7P valve special stem seals HC High cycle service ORV Viton O-ring based ORB NBR O-ring based ORE EPDM O-ring based FDA compliant, stem seal, Virgin LAX PEEK thrust and TFM, X shape, gasket CF PTFE thrust and PPX X shape gasket
9
w w w. h a b o n i m. c o m Habonim USA Toll Free Phone: -8--800 Toll Free Fax: -8--999 sales_usa@habonim.com Habonim EUROPE Tel: + 0 8 79 sales_eu@habonim.com sales_international@habonim.com Habonim AUSTRALIA Tel: + 00 00 988 sales_au@habonimau.com Habonim CHINA Tel: + 8 90 * sales_china@habonim.com Habonim ISRAEL Tel: +97--99 Fax: +97--99 sales_international@habonim.com Habonim UK Tel: +--8 Fax: +--8 sales_uk@habonim.com Habonim SINGAPORE Tel: + 9 788 Fax: + 99 sales_singapore@habonim.com www.habonim.com Cat. 0/ REV.0