Angle & Vertical Grinders Lightweight aluminium housing to help reduce operator fatique. Designed to handle a variety of applications from fine deburring to heavy grinding. Equipped for Type 27 depressed centre wheels.. Updated Comfort Grip & Spindle Lock. (831-L only) 519 4 Angle Grinder 911I 5 Angle Grinder 831-L 7 Angle Grinder Ergonomic cushion grip handle for greater comfort and minimal vibration. Swivel side exhaust directs exhaust air away from work area. Stall torque resistance superior than regular tools and out performs the competition.. Powerful twin chamber motor for higher torque and working efficiency. 5190 4 Angle Grinder 9110 5 Angle Grinder Wheel Spindle Thread 519 11,000 4 Type 27 3/8-24 6 9 4 1/4 3/8 911I 11,000 5 Type 27 5/8-11 6 10-1/4 4-2/5 1/4 3/8 831-L 7,000 7 Type 27 5/8-11 6.5 13-1/2 8 1/4 3/8 5190 11,000 4 Type 27 3/8-24 5 9-3/5 3-1/3 1/4 3/8 9110 10,000 5 Type 27 5/8-11 5 9-3/5 3-1/3 1/4 3/8 1
Angle Grinders. Excellent power-to-weight ratio.. Non friction govenor system allows constant grinding performance. SG-414A 4 Angle Grinder SG-511A 5 Angle Grinder SG-776A 7 Angle Grinder Ergonomic Vibration Reduced Handle Spindle Lock. Rear Exhaust Low Noise - (83 dba) Accepts Type 1 Cut-off and Type 27 grinding wheels. Safety Throttle Lever. Optional Piped Away Exhaust. Swivel Guard, adjustable in nine(9) steps. 6192 4-1/2 & 5 Angle Grinder Wheel Spindle Thread Consumptio n SG-414A 13,600 4 Type 27 3/8-24 34 9-11/16 2-9/10 1/4 3/8 SG-511A 10,900 5 Type 27 5/8-11 34 9-11/16 3-1/10 1/4 3/8 SG-776A 7,600 7 5/8-11 57 11-13/16 6-2/5 3/8 1/2 6192-4-1/2 10,000 4-1/2 5/8-11 4 9.4 4.4 1/4 3/8 6192-5 10,000 5 5/8-11 4 9.4 4.4 1/4 3/8 2 Pneutool Parts & Service Co. Ltd. 33 Haas Road, Toronto, On M9W 3A1 Tel: 416-748-1200 Toll Free: 1-888-748-1201 Fax: 416-748-2695 E-mail: sales@pneutool.com www.pneutool.com
Die Grinders 1/4 Die Grinders. Heavy duty, lightweight construction for general high speed polishing and grinding.. Ball bearing construction for longer tool life.. High quality cylinder construction.. Rear exhaust. (Except 501). Grooved handle design for firm grip. (Except 501) 501 Steel Housing - Front Exhaust 512 512-K Kit c/w 11 Accessories 512-E Extended 522 Angled No Gears, Direct Drive. 529 Angled. Ergonomic cushion grip handle for operator comfort.. Built-in speed regulator for versatile applications.. Swivel rear exhaust directs air away from the work area. 5120 5120-E Extended 5220 Angled Collet 501 22,000 1/4 4 6-1/2 1-1/4 1/4 3/8 512 22,000 1/4 4 6-3/4 1-1/8 1/4 3/8 512-K 22,000 1/4 4 6-3/4 1-1/8* 1/4 3/8 512-E 22,000 1/4 4 13-1/5 2-3/5 1/4 3/8 522 22,000 1/4 4 6-1/3 1 1/4 3/8 529 22,000 1/4 4 6-1/3 9/10 1/4 3/8 5120 22,000 1/4 4 6-3/4 1-1/8 1/4 3/8 5220 22,000 1/4 4 7 1-7/10 1/4 3/8 5120-E 22,000 1/4 4 11 1-4/5 1/4 3/8 * of Tool only. 1
Die Grinders 1/8 Micro Die Grinders These Ergonomic Micro Grinders performs a variety of jobs - Grinding and finishing of metal molds, aluminum die castings, plastic molds, cast iron molds and metal presses. Polishing, deburring and finishing of metals, ceramics and other materials. Finishing and surfacing grinding of welds.. Ideal for quick removal of sharp burrs on precision parts. 516 541 20-G Collet 516 54,000 1/8 5-1/4.25 4 1/4 5 mm 541 60,000 1/8 6-1/8.3 2.8 1/4 3/8 20-G 60,000 1/8 4.9.3 10 1/8 3/16 Collet Inserts & Adaptor Fits Pro 501, 512, 522, 529, 5120, 5220, 5120E, IR-301, and most "import" die grinders. Converts any 1/4 Die Grinder to 1/8. 51224-1/8 1/8" Collet Insert 51224-1/4 1/4" Collet Insert 67956 1/8 Collet Adaptor Pneutool Parts & Service Co. Ltd. 33 Haas Road, Toronto, On M9W 3A1 Tel: 416-748-1200 Toll Free: 1-888-748-1201 Fax: 416-748-2695 E-mail: sales@pneutool.com www.pneutool.com 4
Sanders Specialty Sanders Designed for finishing flat or contoured surfaces. Ideal for touch-up, feather-edging. This heavy duty sander is ideal for body and paint shops. Constant orbital stroke provides a swirl-free finish. Powerful, fully enclosed motor. Balanced for vibration free performance. Ideal for wet or dry sanding. Ball bearing construction, balanced counterweights and built-in speed regulator makes this sander ideal for metal preparation. 402 5" High Sander 416 Jitterbug Sander 420 Dual Action Sander These lightweight and easy to handle Sander/Polisher have a ball bearing construction, allowing vibration-free performance. Quality bevelled gears for long, useful life. regulator provides speed control. Powerful 1 hp motor for the toughest sanding and polishing jobs. New Spindle Lock and Easy Grip handle. Extra heavy gearing for heavy duty operation. Adjustable speed control allows delicate feather-edging to full speed Sanding. 470 7" Angle Sander 472 7" Angle Polisher 821 7" Vertical Sander VP-70042 7 Plastic Backing Pad for Sanders & Polishers with a 5/8-11 spindle thread. Pad Spindle Thread (lbs,) 402 18,000 2, 4-1/2, 5-1/2 7/16-20 1/4 4 7-1/2 2-1/5 3/8 416 8,000 3-2/3 x 6-1/2 N/A 1/4 4 7-3/8 4 3/8 420 10,000 6 5/16-24 1/4 4 8-3/4 3-4/5 3/8 470 4,500 7 5/8-11 1/4 4.2 16 5 3/8 472 2,500 7 5/8-11 1/4 4.2 16 5 3/8 821 4,200 7 5/8-11 1/4 6 7-1/2 4-2/5 3/8 1
Specialty Sanders & Belt Sanders Pro Belt Sanders have an all surface capability and can easily work on steel, cast iron, aluminium, plastic, plywood, hardwoods, stone and other materials. Hot spots are eliminated due to extra belt length. These lightweight highly efficient tools greatly reduces arm fatigue. The swing position grip is 360 0 adjustable for up, down and all-around positioning for operator comfort and convenience. Equipped with silencer. Rear exhaust directs air away from work surface. Standard accessories includes two sandling belts and a hex key wrench.. New Comfort Grip and Safety Lock-off Lever - 610, 620 & 630. 606 610 612 620 630 Rated Power (hp) Noise Lever db(a) Pressure - 85 psi (folded) Max Belt Height 606 16,000 14.2 1/4 x 13.37 80 1-7/10 1-63/64 7-1/2 13 610 16,000 14.2 3/8 x 13.37 80 1-7/10 1-63/64 7-1/2 13 612 16,000 14.2 1/2 x 24.37 80 1-7/10 1-63/64 12 18-1/4 620 16,000 18.4 3/4 x 20-1/2.45 82 3-1/10 2-23/64 10 15 630 12,000 24 1-3/16 x 21-1/4.7 79 4-9/10 4-9/64 10 16 2
Belt Sander Kit Sanding on Flat and Curved Surfaces..5 Interchangeable Contact Arms..Silencer.Uses both Normal Abrasive Belt and Surface Prep Belt..Dead Handle for easy operation..swivel..comfort Grip.Carrying Case 620K Kit Kit includes: 620 Belt Sander Contact Arms 6T6201 6U6201 6V6201 Contact Arm Contact Arm Contact Arm 20mm / 3/4 13mm / 1/2 10mm / 3/8 6W6201 6X6201 Contact Arm Contact Arm 10mm / 3/8 6mm / 1/4 Arms interchangeable with other popular manufacturers. Surface Prep Belt 1/2 x 18, #300 grit Fine Surface Prep Belt 3/4 x 18 #80 grit Coarse Normal Abrasive Belts 1 x 18, #60 grit 1 x 18, #80 grit 3/4 x 18, # 60 grit 3/4 x 18, #80 grit 1/2 x 18, #60 grit 1/2 x 18, #120 grit 3/8 x 18, #120 grit 3/8 x 18, #150 grit 1/4 x 18, #150 grit Free Rec. Pressure (psi) Approx. (mm/in) Approx. (kg/lbs.) 620K 18,000 1/4 3/8 90 4 390 / 15.4 1.3 / 2.9 85 Noise (dba) 3
Palm Sanders These little Palm Sanders have a wide variety of uses - custom woodwork, furniture fixtures, sheet metal, computer frame, outdoor signs, autobody work, painted parts and many more. Solid aluminum alloy housing. Well balanced 3/16 Orbit.. s available at 12,000 rpm - Special order. 6050N-5 & 6050N-6 5" & 6 Random Orbital Sanders. Lightweight composite housing.. Low Vibration. Well balanced. 3/16 Orbit. 3/32 available by special order.. Low Noise - 76 db(a) 6309N-5 & 6309N-6 5" & 6" Random Orbital Sanders Pad Spindle Thread 6309V-5 & 6309V-6 5" & 6 Random Orbital Sanders - c/w Central Vacuum Pick-up (lbs,) 6050N-5 10,000 5 5/16-24 1/4 16 6 1-15/16 3/8 6050N-6 10,000 6 5/16-24 1/4 16 6 1-15/16 3/8 6309N-5 10,000 5 5/16-24 1/4 3 6-7/16 1.7 3/8 6309N-6 10,000 6 5/16-24 1/4 3 6--7/16 1.7 3/8 6309V-5 10,000 5 5/16-24 1/4 3 8-3/8 1.7 3/8 6309V-6 10,000 6 5/16-24 1/4 3 8-3/8 1.7 3/8 When ordering, advise Velcro or Vinyl Pad. Backing Pads Economic replacement Sanding Pads. High quality replacement Sanding Pads. 603-5P-PSA 603-6P-PSA 5" & 6 Econo Vinyl Sanding Pad 603-5V-PSA 603-6V-PSA 5" & 6 Econo Vac. Vinyl Sanding Pad 00-5501-PSA 00-6501-PSA 5" & 6 Vinyl Sanding Pad 00-5502 00-6502 5" & 6 Velcro Sanding Pad 00-5551-PSA 00-6561-PSA 5" & 6 Vacuum Vinyl Sanding Pad Pneutool Parts & Service Co. Ltd. 33 Haas Road, Toronto, On M9W 3A1 Tel: 416-748-1200 Toll Free: 1-888-748-1201 Fax: 416-748-2695 E-mail: sales@pneutool.com www.pneutool.com 00-5552 00-6562 5" & 6 Vacuum Velcro Sanding Pad 4