EN dynamos Automation for sliding gates up to 1000 Kg
Dynamos Automation for sliding gates up to 1000 kg 1. VERSIONSPRECISE AND SILENT MECHANICS TWIN SMART TRADITIONAL ELECTRONICS Reliability and safety are at the base of the mechanical components: produced with sturdy materials, they turn on large ball bearings that are attached to die-cast aluminium roller housings. The internal gear has involute teeth. This special construction allows maximum contact between the worm screw and the gear. The tooth wraps around the screw whereas in traditional construction the parts in contact add up to just a few millimetres. The result: quiet movement, high performance, no wear. Dynamos Twin is the kit solution for sliding gate installation with double wings. Two operators, one with control unit for a perfect synchronization of the motors and accessories. STARG8 control units radically simplify the installer s job, guaranteeing high levels of performance in terms of safety, time and speed of installation. A single programming method speeds up the activation of the automatic devices and managing maintenance operations becomes simple and practical. STARG8 1 control unit 24 Vdc and 1 control unit 230 Vac, for all gate motors. 2. 3. 4 kg of die cast aluminium, ABS plastic parts with anti-uva ray treatment and pure polyester painting make Dynamos a solid automation that can stand up to any sort of weather. Practical regulation using trimmers, self-learning gate travel programming using a single key, diagnostic LEDs and dip-switches for setting operating modes. Management of slow-down options, speed regulation and obstacle control in all versions. Plastic cover with explanatory labels and spare fuses. 1. BUILT-IN CONTROL UNIT The new STARG8 control unit, with built in receiver, guarantees the highest performance 2. STURDY FRAME Sturdy die-cast aluminium frame, designed to last long 3. KEY RELEASE SYSTEM Aluminium release handle with protected lock and customized release key 6 5 4 7 1 BASIC INSTALLATION 1. Operator Dynamos 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light 6. Key or digital switch 7. Rack 3 READY FOR 2
Compartment for an easy access to control unit Built-in Smart Traditional electronics Die-cast aluminium frame Key release system TECHNICAL DATA Code DYN24/400 DYN24/600 DYN24/600F DYN24/1000 DYN230/500 DYN230/1000 Mains power supply (Vac 50 Hz) 230 Motor supply (Vac 50 Hz / Vdc) 24 Vdc 230 Vac Maximum power draw (W) 250 375 400 300 400 Speed (m/s) 0.34 0.25 0.34 0.25 0.17 Force max (N) 400 600 600 850 450 850 Working cycle (%) 90 70 80 30 Protection level (IP) 44 Operating temperature ( C) -20 +55 Weight (kg) 9 11 10 12 Operator dimensions (mm) 325x185x274 h Also available in 110 V / 60 Hz version
Code Motor Control unit Radio receiver Fixing kit Gate max weight Dynamos 500 230 Vac STARG8 AC 500 kg Dynamos 1000 230 Vac STARG8 AC 1000 kg Dynamos 24/400 24 Vdc STARG8 24 400 kg Dynamos 24/600 24 Vdc STARG8 24 600 kg Dynamos 24/600F 24 Vdc STARG8 24 600 kg Dynamos 24/1000 24 Vdc STARG8 24 1000 kg TWIN Code Dynamos 500 with control unit STARG8 AC Dynamos 500 without electronics Dynamos 1000 with control unit STARG8 AC Dynamos 1000 without electronics Gate max weight Dy Twin 500 500 kg Dy Twin 1000 1000 kg KIT Code 500 24/400 24/600 STYLO 4K IDEA PLUS NOVO LT 24 PLUS VIKY 30 NOVO PH 180 TAB Gate max weight Dy Kit 230/500 (2) 500 kg Dy Kit 230/500 LT (1) 500 kg Dy Kit 24/400 (2) 400 kg Dy Kit 24/400 LT (1) 400 kg Dy Kit 24/600 (2) 600 kg Dy Kit 24/600 LT (1) 600 kg Dy Kit 24/400 NV (2) 400 kg Dy Kit 24/600 NV (2) 600 kg 24 V version also available for markets with 110 V / 60 Hz mains power supply STYLO 4K IDEA PLUS VIKY 30 TAB NOVO LT 24 PLUS NOVO PH 180
ACCESSORIES CRIS 100 Nylon rack with metal inserts. 28x20x1000 mm CRIS 200 Rack in galvanized steel with screws and spacers. 30x12x1000 mm CRIS 400 Rack in galvanized steel. 22x22x1000 mm to be welded PDY 100 Foundation plate for ground level mounting BAT M 016 24 V 1.6 Ah battery BAT K3 Battery charge card for BAT M 016 IND 100 Inductive limit switch. To be specified when ordering the Dynamos STARG8 24 24 Vdc spare control unit STARG8 AC 230 Vac spare control unit
the king specialist KINGspecialist app for installers The KINGspecialist app allows you to complete all installation setup phases directly from your smart phone or tablet. Thanks to the wifi module, which can be coupled to STARG8 central units, every professional can now manage all the functions offered by the KING Smart Traditional electronic device simply and intuitively. The App also introduces new functions, such as scheduling of periodical system maintenance, central unit check-ups and remote control management. KINGgates relies on a network of expert professional installers. KINGspecialist is a programme available only to installers: KINGgates quality in the form of a service. Installer-friendly innovations and continuous updates to keep growing together. www.king-gates.com KING GATES srl Via A. Malignani 42 33077 Sacile (PN) Italy Ph. +39 0434 737082 Fax +39 0434 786031 info@king-gates.com