SECTION 1 SCOPE, SPECIFIC TECHNICAL REQUIREMENT AND QUANTITIES

Similar documents
BHARAT HEAVY ELECTRICALS LIMITED Industrial Valves Plant Goindwal (AMRITSAR) Enquiry Date:

(High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU, INDIA MATERIALS MANAGEMENT / CAPITAL EQUIPMENT. Enquiry Date:

Bharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU, INDIA CAPITAL EQUIPMENT / MATERIALS MANAGEMENT

SPECIFICATIONS OF Ni-Cd BATTERY BANK

Bharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU, INDIA CAPITAL EQUIPMENT / MATERIALS MANAGEMENT

4.1 Type of the valve and materials of construction of body and trim shall be as specified in valve Data sheet.

TECHNICAL SPECIFICATION FOR 11 KV AUTOMATIC CAPACITOR SWITCH

020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB)

SPECIFICATIONS FOR 50 V, 600 AH LEAD ACID BATTERY

Bharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU. INDIA CAPITAL EQUIPMENT/ MATERIALS MANAGEMENT

Bharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU, INDIA CAPITAL EQUIPMENT / MATERIALS MANAGEMENT

TECHNICAL SPECIFICATIONS

VOLUME -III TECHNICAL SPECIFICATION FOR MISCELLANEOUS PUMPS (HORIZONTAL)

TECHNICAL SPECIFICATION FOR 11 KV CAPACITOR BANK

TECHNICAL SPECIFICATION FOR 11 KV AIR BREAK (A.B.) SWITCHES:

NLC INDIA LIMITED (formerly Neyveli Lignite Corporation Limited) ('NAVARATNA'-Government of India Enterprise) MATERIALS MANAGEMENT COMPLEX

Inviting Tenders for Supply, Installation, Testing and Commissioning of 500 KVA DG Set for Temperature Controlled Warehouse at Medchal, Hyderabad.

Net +Plus Connection Code

SPECIFICATIONS FOR MOTOR OPERATED VALVES

BHAVNAGAR ENERGY CORPORATION LIMITED 2X250 MW CFBC LIGNITE BASED TPP

BHARAT HEAVY ELECTRICALS LIMITED, JHANSI

Technical Specification for 33 KV 200 AMPs,H.G,Fuse set.

Technical Specifications

Technical Specification of 11KV 200Amp. (3-Pole/2-Pole) Air Break Switch Scope Description of the materials Standards Insulator make

GUJARAT ENERGY TRANSMISSION CORPORATION LTD. TECHNICAL SPECIFICATIONS. 110 V, 100 Ah / 250 Ah & 220 V, 250 Ah / 350Ah TUBULAR LEAD ACID BATTERY SETS

NIT No.:-10/WEX/MCR/HYD. PRESS/2-303/ /Dt

TECHNICAL SPECIFICATIONS FOR LT DISTRIBUTION BOX MADE FROM THERMOSETTING PLASTIC HAVING 200 /400 AMP CAPACITY.

DETAILED NOTICE INVITING TENDER WEST BENGAL STATE ELECTRICITY TRANSMISSION COMPANY LIMITED. (A Govt of West Bengal Enterprise)

GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED SARDAR PATEL VIDYUT BHAVAN RACE COURSE, VADODARA TENDER FOR

TECHNICAL SPECIFICATIONS

Supply of 63 kva DIESEL GENERATOR SET WITH AMF

SPECIFICATION FOR REWIRABLE FUSES (KITKAT FUSES) 100A & 200A SPECIFICATION NO.: DIST/ A- KIT /

TECHNICAL SPECIFICATION OF 11KV SF6 / VCB METAL ENCLOSED, INDOOR (PANEL TYPE) / OUTDOOR RING MAIN UNIT (RMU). (IEC standard equipment)

Extension of EoI Due Date

TECHNICAL SPECIFICATION FOR SHACKLE HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV LINE

TECHNICAL SPECIFICATIONS FOR HARDWARE & ACCESSORIES -ACSR DOG CONDUCTOR FOR TRANSMISSION LINE

TECHNICAL SPECIFICATION

SPECIFICATION FOR HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV/22KV LINE

TENDER DOCUMENT BHARAT HEAVY ELECTRICALS LIMITED, HEEP, RANIPUR, HARIDWAR

MAHARASHTRA NATURAL GAS LIMITED

DIESEL GENERATOR NO.9 OVER HAUL SERVICE AND MAINTENACE LOCATION: TATA CHEMICLAS MAGADI POWER STATION (LAKE MAGADI)

TENDER NO. MGVCL / PP / D2 / 4017/Metal LTDB

Appendix Item Addendum

TECHNICAL SPECIFICATIONS FOR 11KV AIR BREAK (A.B.) SWITCHES :

TECHNICAL SPECIFICATIONS OF HARDWARE & ACCESSORIES ACSR MOOSE CONDUCTOR FOR TRANSMISSION LINE

013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS

TECHNICAL SPECIFICATIONS OF HARDWARE & ACCESSORIES-AL 59 CONDUCTOR FOR 220 KV TRANSMISSION LINE

66 kv SF6 CIRCUIT BREAKER (SPRING OPERATED)

TECHNICAL SPECIFICATIONS OF HARDWARE & ACCESSORIES-ACSR PANTHER CONDUCTOR FOR TRANSMISSION LINE

TECHNICAL SPECIFICATION FOR 11 KV DROP OUT (D.O.) FUSE with Polymeric Insulators:

ANNEXURE XI. (Ni Cd Battery Bank) TECHNICAL SPECIFICATIONS OF 125V STATION BATTERY BANK OF GTG I.

MGVCL//11KV D.O.FUSE/SPECIFICATIONS -:11KV DROP OUT FUSE CUTOUTS:-

Dakshin Gujarat Vij Company Limited

Amendments in Technical Specification No. S-137/DD-177 July 2007 for 11KVAutomatic Switched Capacitor bank at Sub-Stations (33/11KV).

CITY OF LOMPOC UTILITIES DEPARTMENT ELECTRICAL DIVISION SPECIFICATION NO. ELE-112 SUBSTATION CLASS VACUUM CIRCUIT BREAKERS OCTOBER 2008

Request for Quotation (RFQ) for the provision of electrical construction services to the CSIR CSIR RFQ:

PRICE BID - PART: I I

STR-1415 SPECIFICATION FOR BATTERY CHARGERS 220V, 30A FOR SUBSTATIONS ANNEXURES B

D.C. DISTRIBUTION BOARD

S.No. Tender Queries BRPL Reply 1 For 11KV(E) 3Cx300sqmm A2XWY High Ampacity cable conductor details specification not

Tamil Nadu Handicrafts Development Corporation Ltd, Chennai. (Government of Tamil Nadu Undertaking)

CENTER BREAK GROUP OPERATED AIR BREAK SWITCHES RATED 15.5kV THROUGH 170kV EFFECTIVE DATE: 10/25/16 REV B

SPECIFICATIONS FOR 220KV OUT DOOR CIRCUIT BREAKERS. The networks are mainly of outdoor type. The basic parameters are set out below:

Q10. What are the payment terms? A10. Payment terms vary per participating agency. Refer to Page 16 of bid document.

COUNTY OF BERKS Purchasing Department Berks County Services Center, 633 Court Street, Reading, PA Tel: Fax:

: Material Description Quantity UOM

TECHNICAL SPECIFICATIONS OF HARDWARE & ACCESSORIES TWIN AL59 CONDUCTOR FOR TRANSMISSION LINE

Tender documents for supply, erection & commissioning of Plante Type Battery to 2x210 MW IB Thermal Power Station.

TECHNICAL SPECIFICATIONS OF HARDWARE & ACCESSORIES ACSR MOOSE CONDUCTOR FOR 400 KV TRANSMISSION LINE WITH QUAD ACSR MOOSE

026-2 : 1996 CEB STANDARD

CORRIGENDUM/ ADDENDUM 09 ADDITIONAL REQUIREMENT OF ELEVATOR.

NATIONAL CENTER FOR COMBUSTION RESEARCH AND DEVELOPMENT (NCCRD) INDIAN INSTITUTE OF TECHNOLOGY MADRAS CHENNAI , INDIA

City of Storm Lake Fire Department Heavy Rescue Specifications

TECHNICAL BID T 3627

Publication No.: PSG

ARAI/TA(4G_RV)/HORIBA/MEXA 584L/ Dated 25 Mar 2014

SKID MOUNTED PORTABLE DIESEL ENGINE DRIVEN CENTRIFUGAL SUMP PUMP SET INSTALLATION& COMMISSIONING 10 INSTALLATION& COMMISSIONING 1 AU

SAN ANTONIO WATER SYSTEM PURCHASING DEPARTMENT

شركة كهرباء محافظة القدس المساهمة المحدودة

Bharat Heavy Electricals L mited (Seamless steel Tube Plant) Iiruchirappalli , TAMIL NADU, INDIA,

Section V DC Nickel Cadmium Alkaline BATTERY

GUJARAT ENERGY TRANSMISSION CORPORATION LTD. TECHNICAL SPECIFICATIONS FOR 220 V BATTERY CHARGER

High voltage products PASS M0S 252 kv Innovative solution for transmission substation up to 252 kv

CITY AND COUNTY OF SAN FRANCISCO. SPECIFICATION FOR Copier Lease Agreement Last revision 03/03/2016

OUTDOOR OFF LOAD DISCONNECTORS HCB/HDB Range

TECHNICAL SPECIFICATIONS FOR BATTERY OPERATED HEAVY DUTY FORK LIFT TRUCK - 20 T

THE ORIENTAL INSURANCE CO.LTD. REGIONAL OFFICE: IDA Building 4 th Floor, 7,Race Course Road, Indore (M.P.) REQUIREMENT

Tender No:- MTL/PUR/213/Elect/ (K)/9. 2 NEW Moulded case Circuit Breaker with O/L & S/C No 02

SPECIFICATIONS OF SINGLE GIRDER UNDER SLUNG E.O.T. CRANE CAPACITY: 5 MT


Supply of Batteries

Total Ex. Tax/VAT. (Rs.) (if any) in Rs. (Bought out/direct) length 587M 226M

TENDER DOCUMENT PART-II

TENDER. Enq. No. IIITMK/ 0648/18 Date: 07/09/18 Due on:17/09/20183pm

31-SDMS-02 REV. 01 SPECIFICATIONS FOR

34-SDMS-02 SPECIFICATIONS FOR

SAVE ENERGY FOR BENEFIT OF SELF AND NATION

12-SDMS-02 REV. 05 ( )

QUOTATION REF NO: CBK/019/2013/2014 SUPPLY, INSTALLATION, TESTING AND COMMISSIONING A 20 KVA UNINTERRUPTIBLE POWER SUPPLY UNIT (UPS) FOR

WESTERN ELECTRICITY SUPPLY COMPANY OF ORISSA, WESCO. GUARANTEED TECHNICAL PARTICULARS 1 of 2

Transcription:

Tamil Nadu Transmission Corporation Limited Bharat Heavy Electricals Limited 400/110 KV Substation at Thappagundu & 400/230-110 KV Substation at Anikadavu, Technical specification for 420/245/132kV Isolators & 420kV Bus Earth Switch TB-363-316-002 Section-1 Rev-01 SECTION 1 1. SCOPE SCOPE, SPECIFIC TECHNICAL REQUIREMENT AND QUANTITIES This technical specification covers the requirements of design, manufacture, testing at works, packing and dispatch of 420kV 245kV & 132kV Isolators without support insulators, terminal connectors and structure to site. This section covers the scope and quantities of 420kV 245kV & 132kV Isolators. The offered equipment shall also comply with the General Technical Requirements for the project as detailed under section-3 of this specification. For environmental conditions, refer Section-3 carefully. The specification comprise of following sections: Section-1: Scope, specific technical requirements & Bill of Quantities. Section-2: Equipment specifications Section-3: General technical requirements for all equipments under the project. Section-4: Guaranteed Technical Particulars (to be filled at contract stage) Section-5: Checklist (to be filled during tender stage.) In case of any conflict between various sections, order of precedence shall be in the same order as listed above. The equipment is required for the following projects: Name of the Customer : M/s Tamil Nadu Transmission Corporation Limited Name of the Project : 400/110kV Substation at Thappagundu 400/230-110 KV Substation at Anikadavu 2. SPECIFIC TECHNICAL REQUIREMENTS As per Section-2. 3. BILL OF QUANTITIES As per Annexure-1. 4. TYPE TESTING Page 1 of 2

Tamil Nadu Transmission Corporation Limited Bharat Heavy Electricals Limited 400/110 KV Substation at Thappagundu & 400/230-110 KV Substation at Anikadavu, Technical specification for 420/245/132kV Isolators & 420kV Bus Earth Switch TB-363-316-002 Section-1 Rev-01 The Type Test for offered equipments/materials used for this project should have been conducted in any approved Government/Govt. recognized laboratories conforming to latest IS/IEC. The above type test certificates should accompany the drawings of the materials equipments, duly signed under seal by the Institution, who have issued the type test certificate. The above type test should have been conducted not earlier than five (05) years as on the date of technical bid opening, which is 05/4/13 for Anikadavu & 10/4/13 for Thappagundu substations. The original type test certificates shall be furnished for verification at detailed Engineering stage. 5. TECHNICAL QUALIFYING REQUIREMENT The qualified manufacturer should have manufactured, Type tested and supplied at least 50% of the required quantity (for each project) of the Isolator (of the same voltage level as offered and short Circuit Rating of at least 40kA for 3s for 420kV and 40kA for 3s for 245kV & 132kV) to Electricity Boards/Power Utilities in India in any one year during the last five years as on 05/4/13 for Anikadavu & 10/4/13 for Thappagundu substations. The same should have been in satisfactory operation for a minimum period of two years as on date 05/4/13 for Anikadavu & 10/4/13 for Thappagundu substations. Further the qualified manufacturer should have type tested the Isolator from Government / Government recognized laboratories confirming to IS/IEC only. 6. Inspection & Testing All the equipments shall be inspected prior to dispatch in line with relevant IS, approved GTP/ drawing and technical specification, BHEL/ customer approved QAP. Page 2 of 2

Tamil Nadu Transmission Corporation Limited Bharat Heavy Electricals Limited 400/110 KV Substation at Thappagundu & 400/230-110 KV Substation at Anikadavu, Technical specification for 420/245/132kV Isolators & 420kV Bus Earth Switch TB-363-316-002 Annexure-1 Rev-01 Annexure-1 Bill of Quantities A. 400/110kV Thappagundu Substation A.1 420kV Isolator & 420kV Bus Earth Switch S. No. Description Unit Quantity 1 420 KV, 3150 A, 63KA for 1s Isolator with double earth Switch,(3 phase, Horizontal Centre Break, both Isolator & Earth Switch Electrically ganged with accessories, complete in all respects) 2 420 KV, 3150 A, 63 KA for 1s Isolator with single earth Switch, (3 phase, Horizontal Centre Break, both Isolator & Earth Switch Electrically ganged with accessories, complete in all respects) 3 420 KV Bus Earth Switch (Single phase),( 3150 A, 63KA for 1s, with accessories, complete in all respects) 4 Lump Sum Supervision Charges for Erection Testing & commissioning of one No. of 420kV Isolator 5 Supervision charges for erection, testing and commissioning of 420kV Isolator (on man-day basis) Set 7 Set 22 Set 6 No# 1 Day* 1 A.2 132kV Isolators S. No. Description Unit Quantity 1 132 KV, 2000 A, 40 KA for 3s Isolator with single earth Switch (3 phase, Double Break mechanically ganged Isolator with manual Earth Switch with accessories, complete in all respects) 2 132 KV, 2000 A, 40 KA for 3s Isolator without earth Switch (3 phase, Double Break mechanically ganged Isolator with accessories, complete in all respects) Total quantity is bifurcated in following groups [42 No. Isolators are mounted on structure +4 No. Isolators are gantry Mounted at a height of 10m + 8 No. Isolators are gantry mounted at a height of 8m] Set 8 Set 54 3 Lump Sum Supervision Charges for Erection Testing & commissioning of one No. of 132kV Isolator 4 Supervision charges for erection, testing and commissioning of 132kV Isolator (on man-day basis) No.# 1 Day* 1 1

Tamil Nadu Transmission Corporation Limited Bharat Heavy Electricals Limited 400/110 KV Substation at Thappagundu & 400/230-110 KV Substation at Anikadavu, Technical specification for 420/245/132kV Isolators & 420kV Bus Earth Switch TB-363-316-002 Annexure-1 Rev-01 B. 400/230-110kV Anikadavu Substation B.1 420kV Isolators & 420kV Bus Earth Switch S. No. Description Unit Quantity 1 420 KV, 3150 A, 63KA for 1s Isolator with double earth Switch,(3 phase, Horizontal Centre Break, both Isolator & Earth Switch Electrically ganged with accessories, complete in all respects) 2 420 KV, 3150 A, 63 KA for 1s Isolator with single earth Switch, (3 phase, Horizontal Centre Break, both Isolator & Earth Switch Electrically ganged with accessories, complete in all respects) 3 420 KV Bus Earth Switch (Single phase),( 3150 A, 63KA for 1s, with accessories, complete in all respects) 4 Mandatory Spare: 420 KV, 3150 A, 63KA for 1s Isolator with double earth Switch,(3 phase, Horizontal Centre Break, both Isolator & Earth Switch Electrically ganged with accessories, complete in all respects) 5 Lump Sum Supervision Charges for Erection Testing & commissioning of one No. of 420kV Isolator 6 Supervision charges for erection, testing and commissioning of 420kV Isolator (on man-day basis) Set 9 Set 28 Set 6 Set 1 No.# 1 Day* 1 B.2 245kV Isolator S. No. Description Unit Quantity 1 245 KV, 2000A, 40 KA for 3s Isolator with single earth Switch (3 phase, Double Break mechanically ganged Isolator with manual Earth Switch with accessories, complete in all respects) 2 245 KV, 2000A, 40 KA for 3s Isolator without earth Switch (3 phase, Double Break mechanically ganged Isolator with accessories, complete in all respects) Total quantity is bifurcated in following groups [32 No. Isolators are mounted on structure +9 No. Isolators are gantry Mounted at a height of 9.5m] Set 6 Set 41 3 Lump Sum Supervision Charges for Erection Testing & commissioning of one No. of 245kV Isolator 4 Supervision charges for erection, testing and commissioning of 245kV Isolator (on man-day basis) No.# 1 Day* 1 B.3 132kV Isolator 2

Tamil Nadu Transmission Corporation Limited Bharat Heavy Electricals Limited 400/110 KV Substation at Thappagundu & 400/230-110 KV Substation at Anikadavu, Technical specification for 420/245/132kV Isolators & 420kV Bus Earth Switch TB-363-316-002 Annexure-1 Rev-01 S. No. Description Unit Quantity 1 132 KV, 2000 A, 40 KA for 3s Isolator with single earth Switch (3 phase, Double Break mechanically ganged Isolator with manual Earth Switch with accessories, complete in all respects) 2 132 KV, 2000 A, 40 KA for 3s Isolator without earth Switch (3 phase, Double Break mechanically ganged Isolator with accessories, complete in all respects) Total quantity is bifurcated in following groups [22 No. Isolators are mounted on structure +2 No. Isolators are gantry Mounted at a height of 10m +4 No. Isolators are gantry mounted at a height of 8m] Set 4 Set 28 3 Lump Sum Supervision Charges for Erection Testing & commissioning of one No. of 132kV Isolator 4 Supervision charges for erection, testing and commissioning of 132kV Isolator (on man-day basis) No.# 1 Day* 1 Notes: 1. # Supervision charges shall be quoted on lump sum basis only. Bidder shall estimate required no. of man-days for supervision based on his own experience & shall submit a checklist for input wrt site readiness. It will be the sole responsibility of the bidder to obtain site readiness checklist before deputing any of his personnel at site. 2. * - In case of any delay on account of BHEL, after deputing personnel at site, bidder shall also quote supervision charges for one man-day. 3. The insulators, terminal connectors and structure will be supplied by BHEL. Equipment mounting hardware on structure shall be supplied by vendor. Inter pole cables and glands shall be supplied by BHEL. 3