Vertical Machining Center V.Plus-550
V.Plus-550 From the pioneers of the Vertical Machining Center, Matsuura introduce our latest; the all New V.Plus-550 Features New V.Plus-550; the pinnacle of Matsuura vertical technology. Our first VMC was launched in 974. Incorporating 40 years of Matsuura VMC design & construction know-how, delivering high-rigidity and sustained accuracy. Fast, reliable and versatile; offering class leading machining performance in all materials, in all industry sectors. ATC BT40 Spindle Line up From high speed aluminium machining to pre-hardened steels; the spindle options offered with the V.Plus-550 are the pinnacle of 70 years of prestigious Matsuura spindle technology. A 5000min - with 65.Nm of torque is installed as standard. A high-power 5000min - with 9.3Nm and a high-speed 20000 min - with 8.4Nm are available as options. 30 tool station as standard, 60 and 90 tool stations available as options. Matsuura G-Tech 3i as standard Equipped with a large 5-inch touch screen display, the Matsuura G-Tech 3i offers genuine ergonomic comfort & sustained operator performance from FANUCs ihmi. Machine Specifcations Rapid traverse rate X / Y / Z Working surface Loading capacity 40m/min (.57ipm) 860 400mm (33.85 5.74in.) 400kg (880lb.) 2
New! Movement and Ranges X-axis travel mm (in.) 550 (2.65) Y-axis travel mm (in.) 4 (6.4) Z-axis travel mm (in.) 560 (22.04) Cutting test resultsbt40 5000min -,65.Nm Part material Tool size Cutting width Cutting depth Spindle speed Cutting feed rate Cutting capacity Part material Tool size Spindle speed Cutting feed rate Cutting capacity Face mill Aluminum Ø80mm (3.4) 3 blades W=70mm (2.75) D=3mm (0.) 5500 3500 (37.79) 735 Drill Aluminum Ø27mm (.06) 500 500 (9.68) 286 Steel Ø80mm (3.4) 5 blades W=70mm (2.75) D=2mm (0.07) 0 400 (55.) 96 Steel Ø27mm (.06) 500 240 (9.44) 37 End mill Aluminum Ø25mm (0.98) 2 blades W=22mm (0.86) D=6mm (0.23) 5000 4500 (77.6) 594 Tap Aluminum M30 P3.5 20 420 (6.53) Steel Ø20mm (0.78) 4 blades W=2mm (0.07) D=30mm (.8) 5000 3200 (25.98) 92 Steel M20 P2.5 0 250 (9.84) * The above data is based on actual cases. Depending on conditions, actual results may differ. 3
BT40 Spindles; The Industry Standard, Designed and Developed by Matsuura the pioneers of highly rigid CNC Spindle Technology Three State of the Art Spindle Lineup; Built upon 70 years of Matsuura excellence Standard 5000min - (5.5/7.5kW,65.Nm) 30 Power (kw) 65.Nm 47.7Nm 300 Torque (Nm) 0 7.5kW 5.5kW 0.34kW 0.25kW 30 min. rating Continuous rating 4.7Nm 3.5Nm 0. 50 0 00 0 3000 000 5000 In built reliability by superior design and sustained spindle performance from Matsuuras engineering heritage. From high speed aluminum machining to pre-hardened steels; the exceptional performance in all machining environments is assured. A 5000min - with 65.Nm of torque is installed as standard. A high-power 5000min - with 9.3Nm and a high-speed 20000 min - & 8.4Nm are available as options. Matsuura control every aspect of our Spindles creation; from design concept, to precision in-house component manufacture, to clean room assembly, to rigorous testing, to fi nal installation & commission. Quality assurance & sustained Spindle performance every time. Maintenance free Spindle technology; grease lubricated, low noise, environmentally friendly. 50 Power (kw) 0. Option 9.3Nm 95.4Nm 47.7Nm 0.62kW 0.50kW 0.25kW High-power type spindle 5000min - (7.5/5kW,9.3Nm) 50 5 min. rating 5 min. rating Continuous rating 200 0 00 500 500 Torque (Nm) 5kW 0 7.5kW 9.5Nm 4.8Nm 000 5000 30 Power (kw) Option 8.4Nm 79.5Nm High-speed type spindle 20000min - (/5,5/8.5kW,8.4Nm) 5kW kw 500 8.5kW Torque (Nm) 5kW 0 3.9kW 3.8Nm 23.9Nm 29.4Nm 0.45kW 0.33kW 50% ED rating Continuous rating 8.8Nm 7.2Nm 0. 6000 40 0 00 320 4500 000 20000 4
Options; Tailored to Your Process 30-tool drum magazine 60-tool chain magazine 90-tool chain magazine Tool specifi cation BT40 HSK-A63 kg (22lb.) 300mm (.8in.) 0mm (3.4in.) 50mm (5.90in.) Rapid Metal Removal Requires Ultra Efficient Chip Flow & Swarf Clearance Smooth and Efficient Swarf management by Design Steep angle gradients on telescopic guard covers & internal surfaces & powerful coolant wash system facilitate the rapid despatch of chips and swarf from the machining enclosure, delivering maintenance free extended machining without the need for manual intervention. For environments where vast amounts of metal removal take place, the options below are available. Coolant tank Lift-up chip conveyor Chip-fl ush coolant Chip-fl ow coolant Spiral chip conveyor Chip bucket 5
Operating Convenience Allowing Even Beginners to Use it With Confidence Matsuura Intelligent Meister System Combining Craftsmanship, Skill and Ingenuity Matsuuras original interface with uncompromising pursuit of usability Eco mode Power savings Power cut-off function Energy-saving devices installed Eco-operation Stable accuracy Spindle thermal displacement compensation Environmental thermal displacement compensation Reduced machine downtime Hassle-free, simple operation Tool setup support Workpiece setup support Preventive maintenance support function Machine recovery support function Electronic manual function E-mail transmission function New Operation Panel Matsuura G-Tech 3i Equipped with a large 5-inch touch screen display, the Matsuura G-Tech 3i offers genuine ergonomic comfort & sustained operator performance Icons required for operation, setup and maintenance are displayed on screen. Screen icons required for each task - Operation, Setup, Maintenance- are displayed. Screen switching response time is improved by 50% compared to conventional panels. USB thumb drives and CF cards are also supported for data input/output. Customization is possible according to tasks to be performed. Program management Tool offset Electronic manual display 6
Standard Machine Specifcations Movement and Ranges X-axis stroke mm (in.) 550 (2.65) Y-axis stroke mm (in.) 4 (6.4) Z-axis stroke mm (in.) 560 (22.04) Table Working surface mm (in.) 860400 (33.855.74) Loading capacity kg (lb.) 400 (880) Spindle Spindle speed min - 50 5000 (auto grease lubrication) Spindle speed change command S5 digits direct command Type of spindle taper hole 7/24 taper #40 (BT double contact type) Spindle bearing inner diameter mm (in.) 70 (2.75) Spindle motor output kw AC 5.5/7.5 Max. spindle torque Nm 65. Feedrate Rapid traverse ratex / Y / Z mm/min (ipm) 40000 (574.8) Feedrate X / Y / Z mm/min (ipm) 40000 (0.03 574.8) Automatic Tool Changer Type of tool shank JIS B 6339 tool shank 40T Pullstud JIS B 6339 pullstud 40P Tool storage capacity tools 30 (Drum magazine) Max. tool diameter mm (in.) 80 (3.4) adjacent tools) 50 (5.90) (Without adjacent tools) Max. tool length mm (in.) 300 (.8) Max. tool mass kg (lb.) (22.05) Method of tool selection Memory random system Power Sources Electrical power supply kva 29 (Depends on the options provided) Power supply voltage V AC 200 / 220% Transformer required for the voltage except adove Power supply frequency Hz 50 / 60 Tank Capacity Coolant tank capacity L 350 Oil cooler tank capacity L 4 (Total capacity: 6) Machine Size Machine weight kg (lb.) 6200 (3640) NC System Control system Matsuura G-Tech 3i Standard Accessories 0. Total splash guard 02. Synchronized tapping function 03. AD-TAP function 04. IPC function 05. Spindle oil cooler 06. Coolant unit 07. Auto grease supply unit for feed axes 08. Spindle overload protection function 09. M-code counter (9kinds). Work light. Indicator lamp 2. Service tools and tool box 3. Machine color paint 4. Leveling bolts, leveling plates 5. Chip flow 6. ATC auto door 7. Chip flush 8. MIMS (Matsuura Intelligent Meister System) 9. Software tool for memory card program operation & editing 20. Integrating spindle run hour meter 2. Integrating auto run hour meter 22. Electronic manual 23. E-mailing function 24. Fault diagnosis function 25. Spindle thermal displacement compensation system * 2 years spindle warranty List of Fittings Spindle 5000min - (BT40 auto grease lubrication) 5000min - (BT40 auto grease lubrication) Spindle motor output kw Low: 7.5/5High: 7.5/5 Max. spindle torque Nm 9.3 20000min - (BT40 auto grease lubrication) Spindle motor output kw Low: /5High: 5/8.5 Max. spindle torque Nm 8.4 ATC 30 tools (Drum magazine) 60 tools (Chain magazine) 90 tools (Chain magazine) High Accuracy Control Scale feedback X-/Y-/Z-axis (HEIDENHAIN) Environmental thermal displacement compensation (5000min - spindle) Environmental thermal displacement compensation (20000min - spindle) Coolant Vacuum type coolant through A Vacuum type coolant through B Vacuum type coolant through C 2MPa Vacuum type coolant through C 7MPa Mist separator (without fire dampe/with fire dampe) Coolant temperature controller with tank 0L Automatic Measurement, Tool Breakage Detection Automatic measurement/automatic alignment (optical, RENISHOW/BLUM) Tool breakage/full automatic tool length measurement (contact) Tool breakage/full automatic tool length measurement (laser, RENISHOW/BLUM) External tool breakage (contact) Chip Removal Chip bucket Lift-up chip conveyor (scraper) Air blow for chip removal Workpiece cleaning gun (machine side) Operation/Maintenance Support Reliability Meister Plus Additional eight M functions Spindle load monitoring function Weekly timer 3-color signal light (red, yellow, green from top) External manual pulse generator Rotary wiper (Air/Electric) Optional Package High-speed, high-precision package Table Top View Unit: mm (in.) 860 (33.85) StandardOption 25 (5) 25 (5) 200 (7.87) 400 (5.74) +0.027 +0.00 8 0 (/6 0 ) 3 +0. 0 9 2 Floor plan Unit: mm (in.) 26 (44.33) 504 (59.2) External view Unit: mm (in.) Left side view Front view 365 (24.60) 600 (23.62) 865 (73.42) (700 (27.55)) LEVELING BOLTS 6-M32P2 OPERATOR PANEL 20 (40.5) 60 (2.36) (#40 30TOOL MAGAZINE) 60 (6.29) 705 (27.75) 825 (32.48) 65 (24.2) 430 (6.92) 430 (6.92) 2775 (9.25) OIL COOLER COOLANT TANK 59 (20.43) N/C UNIT 260 (.23) AIR SUPPLY POWER SUPPLY 307 (2.08) 848 (33.38) (0 (3.93)) (SPACE FOR PULLING OUT COOLANT TANK) COOLANT THROUGH C 2MPa OP 2635 (3.74) 2497 (98.30) (HEIGHT AT SHIPMENT) #40 30TOOL MAGAZINE 205 205 (8.07) (8.07) Y-AXIS TRAVEL 220276 (86.658.70) 2200 (86.6) 50 (.96) 560 (22.04) 850 (33.46) Z-AXIS TRAVEL 275 275 (.82) (.82) X-AXIS TRAVEL 5050 (98.8) 342 (23.70) 865 (73.42) 7
URL : http://www.matsuura.co.jp/ E-MAIL : webmaster@matsuura.co.jp MATSUURA MACHINERY CORPORATION - Urushihara-cho Fukui City 9-8530, Japan TEL : +8-776-56-86 FAX : +8-776-56-85 MATSUURA EUROPE GmbH Berta-Cramer-Ring 2 D-65205 Wiesbaden-Delkenheim, Germany TEL : +49-622-7803-80 FAX : +49-622-7803-33 URL : http://www.matsuura.de/ E-MAIL : info@matsuura.de MATSUURA MACHINERY Ltd. Gee Road, Whitwick Business Park, Coalville Leicestershire, LE67 4NH, England TEL : +44-530-5-400 FAX : +44-530-5-440 URL : http://www.matsuura.co.uk/ E-MAIL : sales@matsuura.co.uk Facebook : www.facebook.com/pages/matsuura-machinery-ltd/427006380682983 MATSUURA MACHINERY GmbH Berta-Cramer-Ring 2 D-65205 Wiesbaden-Delkenheim, Germany TEL : +49-622-7803-0 FAX : +49-622-7803-33 URL : http://www.matsuura.de/ E-MAIL : info@matsuura.de ELLIOTT MATSUURA CANADA INC. 220 Buckingham Road Oakville Ontario L6H 5X2, Canada TEL : +-905-829-22 FAX : +-905-829-5600 URL : http://www.elliottmachinery.com/ E-MAIL : sales@elliottmachinery.com MATSUURA MACHINERY USA INC. 325 Randolph Ave., St.Paul, MN 552, U.S.A. TEL : +-65-289-9700 URL : http://www.matsuurausa.com/ E-MAIL : info@matsuurausa.com Product specifications and dimensions are subject to change without prior notice. The photos may show optional accessories. This product is subject to all applicable export control laws and regulations FZ-E.0 20608 3000 B N