CIXI TECHNOLOGY CO., LTD.
Content Material / Accuracy / Tolerance Tolerance / Radial Clearance / Shield And Seal Vibration Lubricating Grease And Specifications Inch Size Bearings Miniature Ball Bearings Deep Groove Ball Bearings Products Show P10 P11 P12 P13 P17 P18 P20 P22
Cixi ATF Company mainly produces deep groove ball bearings, special bearings, and other mechanical parts. We have the ability to develop customer s bearing for their special applications, and our all staff of engineers ensure that our quality and testing standards can meet and exceed customer s requirements. All components and final assembled products quality and life testing according to QC request. We are ISO9001 certified. Our products are sold worldwide and we are recognized for our commitment to quality, service and competitive price.
Manufacturing Equipment Production Line 02 03 04 01 0 06 07 Automatic Assembly Line Inspection Appliance 01 Assembly Line 02 Heat Treatment 03 Assembly Line 04 Assembly Line 0 Greasing 06 Washing Station 07 Laser Marking Machine 10 11 08 09 12 13 08 Hardness Durometer 09 Hardness Durometer 10 Roundness Measuring Equipment 11 Metalloscope 12 Profilometer 13 Projectionmeter
ATF BEARING
Material The rings and steel balls of ATF bearings are made of vacuum degassed GCrl bearing steel (equivalent to AISI2100 and 100Cr6), the cage is made of punched cold rolled steel (#08 or #10) or in reinforced plastic upon request. Shields are made of imported SPCC steel or stainless steel (1 Crl 8Ni9) upon request. Seals are made of nitrile robber, or oil-proof refractory rubber, with steel bone frame (#08 or #10), or stainless steel (1 Cr18Ni9) upon request. The chemical composition of bearing steel and stainless steel are shown in following table. Steel No. C% Si% Mn% S% P% Cr% GCr1 0.9-1.0 0.1-0.3 0.2-0.4 0.02 0.02 1.40-1.6 9Cr18 0.90-1.00 0.80 0.80 0.030 0.03 17.0-19.0 Accuracy The accuracy of bearings is classified as P2, P3, P4, P, P6 and P0 according to Chinese Standards GB/T307.1-94 and GB/T307-84, equivalent to IS0492 and ANSI / AFBMA as shown in following table. Standard Accuracy Class GB307-84 B C D E G GB/T307.1-94 P2 P4 P P6 P0 ISO 2 4 6 0 ANSI ABEC9 ABEC7 ABEC ABEC3 ABEC1 SKF P2 P4 P P6 P0 Tolerance ATF bearing are generally P6 class. Allowable tolerances are shown in following tables. Allowable Tolerances of Radial Bearing (Inner Ring) Accuracy class P0 (ABEC-1) P6 (ABEC-3) P (ABEC-) P4 (ABEC-7) d (mm) From To dmp Upper deviation Lower deviation Vdp Diameter Series 9 0.1 2,3,4 Vdmp Kia Sia Sd Bs VBs max max max max max Upper deviation Lower deviation 2. 10 0-8 10 8 6 6 10 20 10 0-120 1 10 18 0-8 10 8 6 6 10 20 14 0-120 20 18 30 0-10 13 10 8 8 13 24 16 0-120 20 30 0 0-12 1 12 9 9 1 - - 0-120 20 0 80 0-1 19 19 11 11 20 - - 0-10 2 2. 10 0-7 9 7 6 10 8 0-120 1 10 18 0-7 9 7 7 10 8 0-120 20 18 30 0-8 10 8 6 6 8 12 9 0-120 20 30 0 0-10 13 10 8 8 10 - - 0-120 2 0 80 0-12 1 1 9 9 10 - - 0-10 2. 10 0-4 4 3 4 7 7 0-40 10 18 0-4 4 3 4 7 7 0-80 18 30 0-6 6 3 4 8 8 0-120 30 0 0-8 8 6 6 4 8 8 0-120 0 80 0-9 9 7 7 8 8 0-10 6 2. 10 0-4 4 4 4 2 2. 3 3 0-40 2. 10 18 0-4 4 4 4 2 2. 3 3 0-80 2. 18 30 0-4 4 2. 3 4 4 0-120 2. 30 0 0-6 6 4 4 3 4 4 4 0-120 3 0 80 0-7 7 4 4 3. 4 4 0-10 4 max Allowable Tolerances of Radial Bearing (Outer Ring) Accuracy class P0 (ABEC-1) P6 (ABEC-3) P (ABEC-) P4 (ABEC-7) d (mm) From To dmp Upper Lower deviation deviation Open Vdp Diameter Series Closed 9 0.1 2,3,4 2,3,4 VDmp Kea Sea SD Cs VCs max max max max max max 6 18 0-8 10 8 6 10 6 1 30 10 18 30 0-9 12 9 7 12 7 1 36/40 14 Same 30 0 0-11 14 11 8 16 8 20 40 16 with 0 80 0-13 16 13 10 20 10 2 40 - Bs of 80 6 120 18 0 0-1 -7 19 9 19 7 11 26 9 11 3 8 4 1-10 inner ring 18 30 0-8 10 8 6 10 6 9 20 10 of the Same 30 0 0-9 11 9 7 13 7 10 20 10 same with bearing 0 80 0-11 14 11 8 16 8 13 20 - Bs of 80 6 18 120 18 30 0 0 0-13 - -6 16 6 16 4 10 4 20 4 10 3 3 18 6 22 8 8-8 8 inner ring of the 30 0 0-7 7 4 7 8 8 same bearing 0 80 0-9 9 7 7 7 8 10 8 6 80 120 0-10 10 8 8 8 10 11 9 8 6 18 0-4 4 3 3 3 2 3 4 2. 18 30 0-4 4 4 2. 4 4 2. 30 0 0-6 6 3 4 2. 0 80 0-7 7 3. 4 3 80 120 0-8 8 6 6 6 4 6 6 4 Radial Clearance The radial clearance of bearings is specified in groups from C2 (smallest) to C (biggest) as per following table Bearing bore (mm) group 2-C2 Standard group-c0 group 3-C3 group 4-C4 group -C From To min max min max min max min max min max 2. 6 0 7 2 13 8 23 - - - - 6 10 0 7 2 13 8 23 14 29 20 37 10 18 0 9 3 18 11 2 18 33 2 4 18 24 0 10 20 13 28 20 36 28 48 24 30 1 11 20 13 28 23 41 30 3 30 40 1 11 6 20 1 33 28 46 40 64 40 0 1 11 6 23 18 36 30 1 4 73 0 6 1 1 8 28 23 43 38 61 90 Shield And Seal ATF bearings can be supplied in various types, as open, with single or double shields (Z or 2Z), and with single or double seals (RS or 2RS). Double shielded (2Z) and double sealed (2RS) bearings are supplied with. So, they can be used directly after being unpacked at temperature -40 ~ + 200. Special Volume and type can also be supplied. P10 P11
Vibration Vibration of bearings is represented by Z, Z1, Z2, Z3, and Z4. It is tested by S0910 instrument on acceleration basis. For special requirement of speed vibration control, the bearings are tested by BVT-1 instrument and divided into V1, V2, V3, and V4. Bearing bore d(mm) Diameter Series(0) Vibration(Acceleration) db Vibration(Speed) um/s Diameter Series(2) Diameter Series(3) V1 V2 V3 V4 Z Z1 Z2 Z3 Z Z1 Z2 Z3 Z4 Z Z1 Z2 Z3 Z4 Low 37 36 34 30 38 37 34 32-39 37 3 33-74 48 40 8 36 30 3 21 18 32 11 11 6 37 36 34 30 38 37 34 32-39 37 3 33-74 48 40 8 36 30 3 21 18 32 11 11 7 39 38 3 31 40 38 36 34 - - - - - - 92 66 4 72 48 40 44 28 24 38 12 12 8 39 38 3 31 40 38 36 34 - - - - - - 92 66 4 72 48 40 44 28 24 38 12 12 9 41 40 36 32 42 40 37 3 - - - - - - 92 66 4 72 48 40 44 28 24 38 12 12 10 43 42 38 33 44 42 39 3 30 46 44 40 37 32 120 80 70 90 60 0 3 30 4 14 14 12 44 43 39 34 4 43 39 3 30 47 4 40 37 32 120 80 70 90 60 0 3 30 4 14 14 1 4 44 40 3 46 44 41 36 31 48 46 42 38 33 10 110 8 110 78 60 6 46 3 2 18 18 17 46 44 40 3 47 4 41 36 31 49 47 42 38 33 10 110 8 110 78 60 6 46 3 2 2 2 20 47 4 41 36 48 46 42 38 33 0 48 43 39 34 180 12 100 130 100 7 80 60 4 60 30 32 2 48 46 42 38 49 47 43 40 36 1 49 44 41 37 180 12 100 130 100 7 80 60 4 60 30 32 28 49 47 43 39 0 48 44 41 37 2 0 4 42 38 180 12 100 130 100 7 80 60 4 60 3 40 30 49 47 43 39 0 48 44 41 37 2 0 4 42 38 200 10 130 10 120 100 90 7 60 70 3 40 32 0 48 44 40 1 49 4 42 38 3 1 46 43 39 200 10 130 10 120 100 90 7 60 70 3 40 3 1 49 4 41 2 0 46 43 39 4 2 47 44 40 200 10 130 10 120 100 90 7 60 70 42 4 40 3 1 46 42 4 2 47 44 40 6 4 49 4 41 240 180 160 180 10 130 110 90 80 82 0 0 4 3 48 4 6 4 49 46 43 8 6 1 47 44 240 180 160 180 10 130 110 90 80 82 60 60 Medium High Low Medium High Low Medium High Low Medium High Lubricating Grease And Specifications Manufacturer Brand Viscosity Base oil Exxon Kyodo Yushi Drop point Consistency Operating temperature Selection criteria NMB Code Beacon32 (Lithium ) (Diester) 193 290-60~+120 LG20 AC20 (Nathium ) (Mineral) -2~+120 Andok B (Nathium ) (Mineral) 260 280-40~+120 LG38 Andok 260 (Nathium ) (Mineral) 200 20-30~+10 LG71 Arapen RB300 (Lithium ) (Mineral) 200 20-30~+100 * Polyrex EM (Diurea) (Mineral) 260 288-40~+180 low noise * Polyrex EP2 (Urea) (Mineral) 280 280-40~+180 low noise UNIREX N2 (Lithium low (Mineral) 20 280-40~+180 Comple) noise UNIREX N3 (Lithium low (Mineral) 20 23-40~+180 Comple) noise Multemp PS2 (Lithium ) (Diester) 189 280-0~+110 LY72 * Multemp SRL (Lithium ) (Ester) 191 24-40~+10 low noise LY121 Multemp (Urea ) (Mineral) 260 280-10-+160 ET10 Adrex (Lithium ) (Mineral) 198 300-10~+120 Emalube 1130 (Urea) (Mineral) 260 300-10~+130 Multemp LTS (Lithium) (Ester) 20 201-60~+130 Multemp SRH (Lithium ) (Ester) 20 201-40~+10 LY30 * Multemp high (Diurea) (Synthetic oil) 220 260-40~+200 SB-M speed Multem SC-C (Diurea) (Synthetic oil) 280 300-40~+200 water-pump Oneluba (Lithium) (Diester 198 270-10~+110 Mineral) Unilube DL1 (Lithium) (Mineral) 18 332-10~+110 Note: * indicates the commonly-used of ATF. 0 7 4 0 47 8 1 48 4 60 7 3 49 46 280 200 200 210 160 160 12 100 100 9 70 70 P12 P13
Lubricating Grease And Specifications Manufacturer Brand Viscosity Base oil Kyodo Yushi Kluber Drop point Consistency Operating temperature Selection criteria ET-K (Diurea) high (Synthetic oil/ 260 300-40~+200 speed alternators Grease) ET-100K (Synthetic oil) 260 280-40~+200 high temperture ET-R (Synthetic oil) 260 280-40~+200 high temerature, low temperature torque good Multemp FF- SL Multemp FF- RM Staburags NBU12 (PTFE ) (Fluoinated) 300-30~+20 (PTFE ) (Fluoinated) 290-30~+20 (Barium) (Mineral) 220 270-3~+10 lsoflex NBU1 (Barium ) (Dlester Mineral) 220 280-30~+130, corrosion resisting, corrosion resisting high-low temperature high-low temperature Isoflex Super LDS18 (Lithium) (Diester) 190 280-60~+130 Isoflex Super TEL (Lithium) (Ester Mineral) -6~+70 Isoflex LDS18 Special A (Lithium) (Diester) 190 280-60~+130 Isoflex PDB38 CX100 (Lithium) (Ester) -70~+120 Isoflex Topas (Synthetic (Barium) NB2 hydrocarbon) 240 280-60~+170 Unisilikon TK44N2 Na-Komplex (Phlorosilicon) -60~+230 lsoflexnca1 (Ester Mineral oil) 180 26-29 -40~+130 high speed * Asonic (Lithium ) (Synthetic) 190 26-29 -0~+140 GLY32 * Asonic low Polyhamstoff (Ester Mineral) 20 20-280 -40~+180 GHY72 noise Asonic high-low temperature (Polyurea) (Ester) 240 20-280 -40~+180 HQ72-102 and low noise Petamo (Synthetic (Polyurea) 240 20-280 -2~+10 GHY133 Mineral oil) Petamo ligh temperature (Polyurea) (Ester) 20 20-280 -20~+180 GHY443 longevity Note: * indicates the commonly-used of ATF. NMB Code LY218 Lubricating Grease And Specifications Manufacturer Brand Viscosity Base oil Dow Corning Shell Lubcon Drop point Consistency Operating temperature Selection criteria NMB Code Molykote 33M (Lithium) (Silicone) 210 260-70~+180 high-low temperature LY81 Molykote 44M (Lithium) (Silicone) 204 260-40-+200 LY13 Molykote M (Lithium) (Silicone) -~+16 LY2 Molykote BR2plus (Lithium) (Mineral) 280-30~+10 high speed Molykote FS1292 (PTFE) (Phlorosilicon) 232 310-40~+200 LY9 Molykote FS341 (PTFE) (Phlorosilicon) 260 28-40~+230 anti-chemical solcent Molykote EM0L (Lithium) (Synthetic oil) 19 32-40~+10 low noise Molykote BG20 (Lithium) (Synthetic oil) 230 26-29 -0~+180 high speed *Alvania RL2 (Lithium) (Mineral) 182 272-2~+120 LY83 Alvania No.3 (Lithium) (Mineral) 183 233-20~+13 LY84 Alvania RA (Lithium) (Mineral) 183 22-2~+120 LY18 Alvania EP2 (Lithium) (Mineral) 18 276-10~+100 *Alvania RLQ2 (Lithium) (Mineral) 19 266-0~+10 lownoise high speed Sunlight 2 (Lithium) (Mineral) 196 273-20~+120 Dolium R (Mineral) 238 281-20~+140 LY119 Aero shell No. Microgel (Mineral) 260 282-10~+130 LG3 Aero shell No.7 Microgel (Mineral) 260 288-70~+10 LG49 Aero shell No.1A (PTFE) (Diester) 260 280-70~+260 high-low temperature Lubteksonic BQg (Lithium) (Mineral) 20 280-3~+10 low noise Turmo N2 (Polyurea) (PAO/Ester) 20 280-40~+160 commonly-used bearing Turmo low temperature high speed (Lithium) (PAO/Ester) 20 280-70~+130 SHL182 greas Turmo SHL22 (Lithium) (PAO/Ester) 220 280-40~+120 high speed Turmoplex high speed (Lithium) (Ester) 290 280-3~+160(180) TML1 Turmo (Mineral oil/ (Lithium) CX112K Synthetic) 190 26-29 -3~+140(160) low noise Turmo NB1300 Note: * indicates the commonly-used of ATF. (Polyurea) (PAO/Ester) 20 280-40~+180 high load P14 P1
Lubricating Grease And Specifications Manufacturer Brand Viscosity Base oil Mobil Oil Du Pont Toray Silicone Caltex Drop point Consistency Mobilux 2 (Lithium) (Mineral) 280-20~+120 Mobil 22 (Lithium) (Diester Mineral) 192 274-0~+140 *Mobil 28 (Bentonite) (Synthetic hydrocarbon) 260 280-60~+180 Mobilplex 47 (Mineral) 260 280-20~+120 Mobilth SHC100 Mobilth SHC220 Mobilitemp SHC22 Mobilitemp SHC100 Operating temperature Selection criteria NMB Code high-low temperature (Lithium) (Synthetic oil) 20 26-29 -40~+170 high speed (Lithium) (Synthetic oil) 20 26-29 -40~+170 multiple use (glue-earth) (Synthetic oil) 20 26-29 -0~+180 (glue-earth) (Synthetic oil) 20 26-29 -0~+200 Krytox240AC (PTFE) (PFAE) 282-34~+288 Krytox283AC (PTFE) (PFAE) 229-34~+288 Krytox GPL20 Krytox GPL223 Krytox GPL224 Krytox GPL22 Krytox GPL226 Krytox GPL227 (PTFE) (PFAE) -36~+204 high speed, high temperature high speed, high temperature (av') (av') (PTFE) (PFAE) -60~+14, alternator, fan, clutch (PTFE) (PFAE) -1~+179 bearing (PTFE) (PFAE) -36~+204 air pump bearing (PTFE) (PFAE) -36~+260 Cv joint (PTFE) (PFAE) -30~+288 SH44M (Lithium) (Phlorosilicon) 210 260-40~+180 SH33L (Lithium) (Phlorosilicon) 210 300-70~+140 SH41 (Lithium) (Phlorosilicon) 280-10~+200 Chevron SRI-2 Polystar Synthetic 2# RPM Greas SRI-2 RPM Greas SRI OEM Starplex EP2 (Urea) (Mineral) 243 280-30~+10 (Urea) (Mineral) 24 288-30~+180 (Polyurea) (Mineral) 243 280-30~+10 (Polyurea) (Mineral) 243 280-30~+10 (Complex Lithium), corrosion resisting high speed low temperature high speed greas (Mineral) 290 280-2~+130 EP LY48 LY11 LY7 Bearing No. Open type (Shielded type) (Sealed type) Inside Diameter d Outside Diameter D Width B Open type (Shielded type) (Sealed type) Flange Dimensions Open Closed D1/D2 C1 C2 Radius r min Basic Load Rating Dynamic Cr mm in mm in mm in mm in mm in mm mm in 1b 1b Static Cor R144 3.17.120 6.30.200 2.38.0937 2.779.1094 7.18.296 0.84 0.787.004 283 9 R2-3.17.120 7.938.312 2.779.1094 3.71.1406 9.119.39 0.84 0.787.004 60 179 R2-6 3.17.120 9.2.370 2.779.1094 3.71.1406 10.719.422 0.84 0.787.006 640 22 R2 3.17.120 9.2.370 3.967.162 3.967.162 11.176.440 0.762 0.762.012 630 218 R2A 3.17.120 12.700.000 4.366.1719 4.366.1719 - - - -.004 640 22 R1 3.969.162 7.938.312 2.779.1094 3.17.120 9.119.39 0.84 0.914.004 360 149 R16 4.763.187 7.938.312 2.779.1094 3.17.120 9.119.39 0.84 0.914.004 360 149 R166 4.763.187 9.2.370 3.17.120 3.17.120 10.719.422 0.84 0.787.004 710 270 R3 4.763.187 12.700.000 3.967.162 4.978.1960 14.31.6 1.067 1.067.012 1300 48 R3A 4.763.187 1.87.620 4.978.1960 4.978.1960 - - - -.012 1480 61 R168 6.30.200 9.2.370 3.17.120 3.17.120 10.719.422 0.84 0.914.004 37 173 R188 6.30.200 12.700.000 3.17.120 4.762.187 13.894.47 0.84 1.143.006 1080 440 R4 6.30.200 1.87.620 4.978.1960 4.978.1960 17.26.690 1.067 1.607.012 1480 61 R4A 6.30.200 19.00.700.8.2188 7.142.2812 - - - -.016 2340 88 R6 9.2.370 22.22.870.8.2188 7.142.2812 24.613.969 1.7 1.7.016 330 1410 R8 12.700.000 28.7 1.12 6.3.200 7.938.312 31.12.2 1.7 1.7.016 11 241 Note: * indicates the commonly-used of ATF. P16 P17
Open type (Shielded type) (Sealed type) Open type (Shielded type) (Sealed type) Open type (Shielded type) (Sealed type) Open type (Shielded type) (Sealed type) Bearing No. Inside Diameter d Outside Diameter D Open Width B Closed Flange Dimensions Open Closed D1 C1 D2 C2 Radius r min Basic Load Rating Dynamic Cr Static Cor Bearing No. Inside Diameter d Outside Diameter D Open Width B Closed Flange Dimensions Open Closed D1 C1 D2 C2 Radius r min Basic Load Rating Dynamic Cr Static Cor mm mm mm mm mm mm mm mm mm N N 673 L630 3 6 2 2. 7.2 0.6 7.2 0.6 0.0 208 74 683 L730 3 7 2 3 8.1 0. 8.1 0.8 0.1 310 111 693-3 8 3 4 9. 0.7 9. 0.9 0.1 60 179 603-3 9 3 10. 0.7 10. 1.0 0.1 70 187 623-3 10 4 4 11. 1.0 11. 1.0 0.1 630 218 674 L740 4 7 2 2. 8.2 0.6 8.2 0.6 0.1 310 11 - L840 4 8 2 3 9.2 0.6 9.2 0.6 0.1 39 139 684 L940 4 9 2. 4 10.3 0.6 10.3 1.0 0.1 640 22 - L1040 4 10 3 4 11.3 0.6 11.6 0.8 0.1 8 204 694-4 11 4 4 12. 1.0 12. 1.0 0.1 960 34 604-4 12 4 4 13. 1.0 13. 1.0 0.2 960 34 624-4 13 1 1.0 1 1.0 0.2 1300 48 634-4 16 18 1.0 18 1.0 0.2 1340 1 67 L80 8 2 2. 9.2 0.6 9.2 0.6 0.08 310 120 - L90 9 2. 3 10.2 0.6 10.2 0.6 0.1 430 168 - L100 10 3 4 11.2 0.6 11.2 0.8 0.1 430 168 68 L110 11 3 12. 0.8 12. 1.0 0.2 71 281 69-13 4 4 1 1.0 1 1.0 0.2 1080 430 60-14 16 1.0 16 1.0 0.2 1330 0 62-16 18 1.0 18 1.0 0.3 1880 680 63-19 6 6 22 1.2 22 1.2 0.3 2340 88 mm mm mm mm mm mm mm mm mm N N 676 L1060 6 10 2. 3 11.2 0.6 11.2 0.6 0.1 49 218 - L1260 6 12 3 4 13.2 0.6 13.6 0.8 0.1 71 292 686 L1360 6 13 3. 1 1.0 1 1.1 0.2 1080 440 696-6 1 17 1.2 17 1.2 0.2 1340 1 606-6 17 6 6 19 1.2 19 1.2 0.3 2260 83 626-6 19 6 6 22 1. 22 1. 0.3 2340 88 677 L1170 7 11 2. 3 12.2 0.6 12.2 0.6 0.1 4 201 - L1370 7 13 3 4 14.2 0.6 14.6 0.8 0.1 40 276 687 L1470 7 14 3. 16 1.0 16 1.1 0.2 1170 10 697-7 17 19 1.2 19 1.2 0.2 1610 710 607-7 19 6 6 22 1. 22 1. 0.3 2340 88 627-7 22 7 7 2 1. 2 1. 0.3 3300 1370 678 L1280 8 12 2. 3. 13.2 0.6 13.6 0.8 0.1 4 27 - L1480 8 14 3. 4 1.6 0.8 1.6 0.8 0.1 820 38 688 L1680 8 16 4 18 1.0 18 1.1 0.3 160 71 698-8 19 6 6 22 1. 22 1. 0.3 2240 910 608-8 22 7 7 2 1. 2 1. 0.3 3300 1370 628-8 24 8 8 27 1. 27 1. 0.3 330 1430 689 L1790 9 17 4 19 1.0 19 1.1 0.2 1330 66 699 L2090 9 20 6 6 23 1. 23 1. 0.3 2470 1080 609-9 24 7 7 27 1. 27 1. 0.3 330 1430 629-9 26 8 8 28 2.0 28 2.0 0.3 40 1970 P18 P19
Open type (Shielded type) (Sealed type) Open type (Shielded type) (Sealed type) Basic Dimensions Basic Load Rating Limit Rotational Speed d D B Cr Cor Grease Lubrication Oill Lubrication Weight Bearing No. Basic Dimemsions Basic Load Rating Limit Rotational Speed d D B Cr Cor Grease Lubrication Oill Lubrication Weight Bearing No. mm kn r/min Kg - mm kn r/min Kg - 10 12 1 17 20 2 19 1400 70 26000 34000 0.00 61800 22 6 3300 1400 2000 32000 0.011 61900 26 8 480 1980 20000 28000 0.019 6000 30 9 100 2380 19000 26000 0.032 6200 3 11 760 3480 18000 24000 0.03 6300 21 1400 900 22000 30000 0.007 61801 24 6 3380 1480 20000 28000 0.013 61901 28 7 080 2380 19000 26000 0.019 16001 28 8 100 2380 19000 26000 0.022 6001 32 10 6820 300 18000 24000 0.03 6201 37 12 9720 080 17000 22000 0.01 6301 24 1920 1180 20000 28000 0.008 61802 28 7 4000 2020 19000 26000 0.018 61902 32 8 600 20 18000 24000 0.02 16002 32 9 80 280 18000 24000 0.031 6002 3 11 760 3720 17000 22000 0.04 6202 42 13 1100 420 16000 20000 0.080 6302 26 2180 1280 19000 26000 0.008 61803 30 7 4300 2320 18000 24000 0.020 61903 3 8 6820 3380 17000 22000 0.027 16003 3 10 6000 320 17000 22000 0.040 6003 40 12 980 4780 16000 20000 0.064 6203 47 14 1300 680 1000 19000 0.109 6303 62 17 2200 10800 11000 1000 0.268 6403 32 7 340 220 17000 22000 0.020 61804 37 9 60 3600 17000 22000 0.040 61904 42 8 7900 440 1000 19000 0.00 16004 42 12 9380 020 1000 19000 0.068 6004 47 14 12800 660 14000 18000 0.103 6204 2 1 1800 7880 13000 17000 0.142 6304 72 19 31000 1200 900 13000 0.400 6404 37 7 3700 260 1000 19000 0.022 6180 42 9 7360 40 14000 18000 0.00 6190 47 8 8420 10 13000 17000 0.060 1600 47 12 10000 80 13000 17000 0.078 600 2 1 14000 7880 12000 16000 0.127 620 62 17 22200 1100 10000 14000 0.219 630 80 21 38200 19200 800 11000 0.29 640 30 3 40 4 0 42 7 4000 310 12000 16000 0.026 61806 47 9 70 080 12000 16000 0.060 61906 9 11200 620 10000 14000 0.08 16006 13 13200 8300 10000 14000 0.110 6006 62 16 1900 1100 900 13000 0.200 6206 72 19 27000 1200 9000 12000 0.349 6306 90 23 4700 2400 8000 10000 0.710 6406 47 7 4120 340 10000 14000 0.030 61807 10 90 680 900 13000 0.086 61907 62 9 1100 8800 9000 12000 0.100 16007 62 14 16200 1000 9000 12000 0.148 6007 72 17 200 1200 800 11000 0.288 6207 80 21 33200 19200 9000 10000 0.4 6307 100 2 6800 2900 6700 800 0.926 6407 2 7 4400 320 900 13000 0.034 61808 62 12 12000 8980 9000 12000 0.110 61908 68 9 1200 10200 800 11000 0.130 16008 68 1 17000 11800 800 11000 0.18 6008 80 18 2900 18000 8000 10000 0.368 6208 90 23 40800 24000 7000 9000 0.639 6308 110 27 600 3700 6300 8000 1.221 6408 8 7 460 4320 800 11000 0.040 61809 68 12 12800 9720 800 11000 0.140 61909 7 10 21000 10200 8000 10000 0.170 16009 7 16 21000 14800 8000 10000 0.230 6009 8 19 3100 2000 7000 9000 0.416 6209 100 2 2800 31800 6300 8000 0.837 6309 120 29 7700 400 600 7000 1.20 6409 6 7 100 4680 8000 10000 0.07 61810 72 12 12800 11200 8000 10000 0.140 61910 80 10 16200 13200 7000 9000 0.180 16010 80 16 22000 16200 7000 9000 0.28 6010 90 20 3000 23200 6700 800 0.463 6210 110 27 61900 38000 6000 700 1.082 6310 130 31 92200 200 300 6700 1.8 6410 P20 P21
Products Show 01 02 07 08 03 04 09 10 01 Special Bearings 02 Spherical Plain Bearings 03 Washing Equipment Series 04 Springs Series 0 Gear Box and Alu Big Pulley 06 Gear Wheel/Chain Wheel 07 4 Axi CNC Products 08 Textile Machine Special Pulley 09 10 0 06 P22 P23
CIXI TECHNOLOGY CO., LTD. Add: A1 Building, CIE Industrial Zone, Suntang Road (N.),Cixi, Ningbo,China. Tel: 0086 74 23681801 Fax: 0086 74 63191810 E-mail:ivan@bearings-in-china.com