WSV600 Wall Luminaire with Open faceplate 2007.4.13 Applications: Oval Surface Wall Sconce Luminaires are ideal for indoor or outdoor applications in, residential, commercial, or architectural installations that requires the fixture to integrate into the design of the structure. The Wall Sconce can be used to direct and guide as well as supply lighting for security. Can be mounted vertically. Housing: Constructed of a one piece high grade die cast aluminum with a powder coat finish. Includes an integral wiring compartment and silicone gasket. One (1) threaded hole (1/2-14 NPSM) provided along with a universal mounting bracket for direct installation to an electrical junction-box. Faceplate: Oval open one-piece high grade die cast aluminum with a high corrosion-resistant powder coat finish and semi-translucent UV stabilized polycarbonate opal lens. Faceplate is secured to housing by four (4) captive, tamper resistant, stainless steel screws. Electrical: Line Voltage Lampholder: Medium Base Incandescent A19 (60W Max.) with high temperature leads (660W, 600V). Compact Fluorescent Lampholder (2 Pin): G23 (9W), rated 75W, 600V. Ballast: Magnetic class P, NPF, available in 120V or 277V (min. start temp. 10 C for 120V or 0 C for 277V). For Remote Ballast (RMT): 10 ft. Compact Fluorescent Lampholder (4 Pin): G24q-1 or GX24q-1 (13W), G24q-2 or GX24q-2 (18W), G24q-3 or GX24q-3 (26W), GX24q-3 (32W), GX24q-4 (42W) rated 75W, 600V. Ballast: Electronic, HPF. Available in 120V or 277V (min. start temp. -30 C). For Remote Ballast (RMT): max. dist. 15 ft (1 lamp), 6 ft (2 lamps). Note: Dimming capability for compact fluorescent lamps requires alternate ballast. Please contact your local representative or factory for options. Finish: Powder coat. Standard color in black, white or natural aluminum finish. Listing: UL / ETL Listed, suitable for wet locations and for all types of constructions including poured concrete. Suitable for installation within 4 feet of ground. ORDERING Example : WSV600/PL42/120/N WSV600 / Lamp / Volt / Lamp Description Lumen Base Bulb Compact Fluorescent 9W PL 600 G23 2 Pin PL9 13W PL 900 G24q-1 4 Pin PL13 18W PL 1200 G24q-2 4 Pin PL18 26W PL 1710 G24q-3 4 Pin PL26 32W PL 2400 GX24q-3 4 Pin PL32 42W PL 3200 GX24q-4 4 Pin PL42 (2) 9W PL 1200 G23 2 Pin PL209 (2) 13W PL 1800 G24q-1 4 Pin PL213 (2) 18W PL 2400 G24q-2 4 Pin PL218 Incandescent (2) 60W 1680 MED A19 INC2 Finish 120 B Black 277 N Natural RMT W White Codes Architects Choice: Most visually appealing fixture based on lamp type. Highest Efficacy: Maximum light output per Watt (Lumen/Watt) RMT - Remote ballast Option (see back cover) Tel:888.458.6368 Los Angeles, CA www.lumenton.com Product specifications subject to change without notice. G1.1
WSV632 Wall Luminaire with Guard Bars ORDERING Example : WSV632/PL18/120/B WSV632 / Lamp / Volt / Finish Lamp Description Lumen Base Bulb Compact Fluorescent 9W PL 600 G23 2 Pin PL9 120 B Black 13W PL 900 G24q-1 4 Pin PL13 277 N Natural 18W PL 1200 G24q-2 4 Pin PL18 RMT W White 26W PL 1710 G24q-3 4 Pin PL26 32W PL 2400 GX24q-3 4 Pin PL32 42W PL 3200 GX24q-4 4 Pin PL42 (2) 9W PL 1200 G23 2 Pin PL209 (2) 13W PL 1800 G24q-1 4 Pin PL213 (2) 18W PL 2400 G24q-2 4 Pin PL218 Incandescent (2) 60W 1680 MED A19 INC2 Applications: Oval Surface Wall Sconce Luminaires are ideal for indoor or outdoor applications in, residential, commercial, or architectural installations that requires the fixture to integrate into the design of the structure. The Wall Sconce can be used to direct and guide as well as supply lighting for security. Can be mounted vertically. Housing: Constructed of a one piece high grade die cast aluminum with a powder coat finish. Includes an integral wiring compartment and silicone gasket. One (1) threaded hole (1/2-14 NPSM) provided along with a universal mounting bracket for direct installation to an electrical junction-box. Faceplate: Oval cross bar one-piece high grade die cast aluminum with a high corrosion-resistant powder coat finish and semi-translucent UV stabilized polycarbonate opal lens. Faceplate is secured to housing by four (4) captive, tamper resistant, stainless steel screws. Electrical: Line Voltage Lampholder: Medium Base Incandescent A19 (60W Max.) with high temperature leads (660W, 600V). Compact Fluorescent Lampholder (2 Pin): G23 (9W), rated 75W, 600V. Ballast: Magnetic class P, NPF, available in 120V or 277V (min. start temp. 10 C for 120V or 0 C for 277V). For Remote Ballast (RMT): 10 ft. Compact Fluorescent Lampholder (4 Pin): G24q-1 or GX24q-1 (13W), G24q-2 or GX24q-2 (18W), G24q-3 or GX24q-3 (26W), GX24q-3 (32W), GX24q-4 (42W) rated 75W, 600V. Ballast: Electronic, HPF. Available in 120V or 277V (min. start temp. -30 C). For Remote Ballast (RMT): max. dist. 15 ft (1 lamp), 6 ft (2 lamps). Note: Dimming capability for compact fluorescent lamps requires alternate ballast. Please contact your local representative or factory for options. Finish: Powder coat. Standard color in black, white or natural aluminum finish. Listing: UL / ETL Listed, suitable for wet locations and for all types of constructions including poured concrete. Suitable for installation within 4 feet of ground. 2007.4.13 Codes Architects Choice: Most visually appealing fixture based on lamp type. Highest Efficacy: Maximum light output per Watt (Lumen/Watt) RMT - Remote ballast Option (see back cover) Tel:888.458.6368 Los Angeles, CA www.lumenton.com G1.2 Product specifications subject to change without notice.
WSV650 Wall Luminaire with Half Lid 2007.4.13 Applications: Oval Surface Wall Sconce Luminaires are ideal for indoor or outdoor applications in, residential, commercial, or architectural installations that requires the fixture to integrate into the design of the structure. The Wall Sconce can be used to direct and guide as well as supply lighting for security. Housing: Constructed of a one piece high grade die cast aluminum with a powder coat finish. Includes an integral wiring compartment and silicone gasket. One (1) threaded hole (1/2-14 NPSM) provided along with a universal mounting bracket for direct installation to an electrical junction-box. Faceplate: Oval half lid one-piece high grade die cast aluminum with a high corrosion-resistant powder coat finish and semi-translucent UV stabilized polycarbonate opal lens. Faceplate is secured to housing by four (4) captive, tamper resistant, stainless steel screws. Electrical: Line Voltage Lampholder: Medium Base Incandescent A19 (60W Max.) with high temperature leads (660W, 600V). Compact Fluorescent Lampholder (2 Pin): G23 (9W), rated 75W, 600V. Ballast: Magnetic class P, NPF, available in 120V or 277V (min. start temp. 10 C for 120V or 0 C for 277V). For Remote Ballast (RMT): 10 ft. Compact Fluorescent Lampholder (4 Pin): G24q-1 or GX24q-1 (13W), G24q-2 or GX24q-2 (18W), G24q-3 or GX24q-3 (26W), GX24q-3 (32W), GX24q-4 (42W) rated 75W, 600V. Ballast: Electronic, HPF. Available in 120V or 277V (min. start temp. -30 C). For Remote Ballast (RMT): max. dist. 15 ft (1 lamp), 6 ft (2 lamps). Note: Dimming capability for compact fluorescent lamps requires alternate ballast. Please contact your local representative or factory for options. Finish: Powder coat. Standard color in black, white or natural aluminum finish. Listing: UL / ETL Listed, suitable for wet locations and for all types of constructions including poured concrete. Suitable for installation within 4 feet of ground. ORDERING Example : WSV650/PL26/120/W WSV650 / Lamp / Volt / Lamp Description Lumen Base Bulb Compact Fluorescent 9W PL 600 G23 2 Pin PL9 13W PL 900 G24q-1 4 Pin PL13 18W PL 1200 G24q-2 4 Pin PL18 26W PL 1710 G24q-3 4 Pin PL26 32W PL 2400 GX24q-3 4 Pin PL32 42W PL 3200 GX24q-4 4 Pin PL42 (2) 9W PL 1200 G23 2 Pin PL209 (2) 13W PL 1800 G24q-1 4 Pin PL213 (2) 18W PL 2400 G24q-2 4 Pin PL218 Incandescent (2) 60W 1680 MED A19 INC2 Finish 120 B Black 277 N Natural RMT W White Codes Architects Choice: Most visually appealing fixture based on lamp type. Highest Efficacy: Maximum light output per Watt (Lumen/Watt) RMT - Remote ballast Option (see back cover) Tel:888.458.6368 Los Angeles, CA www.lumenton.com Product specifications subject to change without notice. G1.3
WSV652 Wall Luminaire with Half Lid Wall and Guard Bar Applications: Oval Surface Wall Sconce Luminaires are ideal for indoor or outdoor applications in, residential, commercial, or architectural installations that requires the fixture to integrate into the design of the structure. The Wall Sconce can be used to direct and guide as well as supply lighting for security. Housing: Constructed of a one piece high grade die cast aluminum with a powder coat finish. Includes an integral wiring compartment and silicone gasket. One (1) threaded hole (1/2-14 NPSM) provided along with a universal mounting bracket for direct installation to an electrical junction-box. Faceplate: Oval half lid guard bar one-piece high grade die cast aluminum with a high corrosion-resistant powder coat finish and semi-translucent UV stabilized polycarbonate opal lens. Faceplate is secured to housing by four (4) captive, tamper resistant, stainless steel screws. Electrical: Line Voltage Lampholder: Medium Base Incandescent A19 (60W Max.) with high temperature leads (660W, 600V). Compact Fluorescent Lampholder (2 Pin): G23 (9W), rated 75W, 600V. Ballast: Magnetic class P, NPF, available in 120V or 277V (min. start temp. 10 C for 120V or 0 C for 277V). For Remote Ballast (RMT): 10 ft. Compact Fluorescent Lampholder (4 Pin): G24q-1 or GX24q-1 (13W), G24q-2 or GX24q-2 (18W), G24q-3 or GX24q-3 (26W), GX24q-3 (32W), GX24q-4 (42W) rated 75W, 600V. Ballast: Electronic, HPF. Available in 120V or 277V (min. start temp. -30 C). For Remote Ballast (RMT): max. dist. 15 ft (1 lamp), 6 ft (2 lamps). ORDERING Example : WSV652/PL213/277/N WSV652 / Lamp / Volt / Finish Lamp Description Lumen Base Bulb Compact Fluorescent 9W PL 600 G23 2 Pin PL9 120 B Black 13W PL 900 G24q-1 4 Pin PL13 277 N Natural 18W PL 1200 G24q-2 4 Pin PL18 RMT W White 26W PL 1710 G24q-3 4 Pin PL26 32W PL 2400 GX24q-3 4 Pin PL32 42W PL 3200 GX24q-4 4 Pin PL42 (2) 9W PL 1200 G23 2 Pin PL209 (2) 13W PL 1800 G24q-1 4 Pin PL213 (2) 18W PL 2400 G24q-2 4 Pin PL218 Incandescent (2) 60W 1680 MED A19 INC2 Note: Dimming capability for compact fluorescent lamps requires alternate ballast. Please contact your local representative or factory for options. Finish: Powder coat. Standard color in black, white or natural aluminum finish. Listing: UL / ETL Listed, suitable for wet locations and for all types of constructions including poured concrete. Suitable for installation within 4 feet of ground. 2007.4.13 Codes Architects Choice: Most visually appealing fixture based on lamp type. Highest Efficacy: Maximum light output per Watt (Lumen/Watt) RMT - Remote ballast Option (see back cover) Tel:888.458.6368 Los Angeles, CA www.lumenton.com G1.4 Product specifications subject to change without notice.
ELECTRICAL BOX for REMOTE BALLAST R E M O T E B A L L A S T I N F O R M AT I O N REMOTE BALLAST Applications: For remote High Intensity Discharge (HID) or Compact Fluorescent (CF) ballasts. Common uses are fixtures designed for remote ballast, multiple fixtures running off one ballast or a centralized electrical input location for all remote ballasts. For use on top of buildings, walls, and in ground for both indoor and outdoor locations. RAG: ABOVE GROUND ELECTRICAL BOX for REMOTE BAL BOX for REMOTE BALLAST Ballast Box Enclosure: Made from aluminum ELECTRICAL (powder coat), galvanized steel, or fiberglass. Silicone/polyurethane gasket used to seal cover. Trade size conduit holes/threaded (1/2 or 3/4) for wire/cord exit. Ballast box secured to the mounting surface by screws/bolts (by other). Please consult factory for ballast box enclosure type used for your application. (Remote Above Ground): Ballast box located horizontal above mounting surface. Options: B = Remote Ballast Only (All Remote Ballasts) RIG: IN GROUND M = Remote Ballast with Emergency Ballast (CF only) Volts (See Fixture Specification) Lamp (See Fixture Specification) Note: See fixture specifications for Remote Ballast Box Max. distance to lamp. Finish: Powder coat. Standard colors in black (Aluminum housing). Listing: UL / ETL Listed, suitable for wet locations. (Remote In Ground): RWS Ballast box located in ground. WALL SURFACE RWS: WALL SURFACE ORDERING / Remote Type Above Ground In Ground Wall Surface Remote Type Remote Ballast (Only) Remote Ballast & Emergency Ballast (CF) Options Options Volts Lamps RAG RIG RWS Volts (See Fixture Specifications) Lamps (See Fixture Specifications for more lamp codes) B M UNV 120 277 PL9 PL13 PL18 PL26 PL32 PL42 PL57 PL209 PL213 PL218 PL226 PL232 ORDERING EXAMPLES 1.RAGB120PL32 2.RAGM277PL32 = = Remote Ballast, 120V input, CF 32 Watt Lamp Remote Ballast, Emergency Ballast (120V) input, CF 32 Watt Lamp (Remote Wall Surface): Ballast Box located vertically on mounting surface. RWS WALL S