SBI INFRA MANAGEMENT SOLUTIONS PVT.LTD. CIRCLE OFFICE, AHMEDABAD STATE BANK OF INDIA, RBO-II, C.N. VIDYALAYA CAMPUS, AMBAWADI, AHMEDABAD-380015 SBIIMS INVITE TENDERS ON BEHALF OF SBI FOR PROPOSED ELECTRICAL WORKS AT ALTERNATE PREMISES FOR AKHBARNAGAR BRANCH AT AHMEDABAD, DIST. AHMEDABAD. FROM THE SBI APPROVED EMPANELLED ELECTRICAL CONTRACTORS UNDER CATEGORY E -1,E-2,E-3,E-4 & E-5 PART B: PRICE BID TENDER SUBMITTED BY: NAME : ADDRESS : DATE : ARCHITECT: BIMAL TALATI ARCHITECTS & INTERIOR DESIGNERS, 304, PRESIDENT HOUSE, OPP. C.N. VIDYALAYA, AMBAWADI, AHMEDABAD 380 006. PHONE (079) 2642 1682. E-MAIL : bimaltalati@gmail.com 1
BIMAL TALATI Architects & Interior Designers 304, President House, Opp. C.N.Vidhyalaya, Ambawadi, Ahmedabad-6. Bill of Quantities for : Proposed Electrification work at Alternate Premises for AKHBARNAGAR BRANCH, Ahmedabad for State Bank of India. SL. ITEM DESCRIPTION QTY. RATE UNIT AMOUNT 1.0 ELECTRICAL WORK Page - 1 1.1 Supply, installation, testing and commissioning of following point wiring as per the specifications and drawings. The unit rate for the switch board and further to point outlet including all hardware, connector strips, fan hook, outlet boxes, switch boards, switch plates, switches, wire conduits etc. A point shall include in addition to phase and netural wire, a PVC insulated earth-continuing wire from L. P. to the final termination at outlet points. All the wiring should be done in concealed / semi concealed open manner or slab / wall / false ceiling. The wiring should be done with rigid PVC conduits / Casing - capping having minimum of 1.6 mm wall thickness and minimum 19mm dia with 440V grade PVC insulated. ISI approved copper conductor wire, with approved make switches and accessories with company boxes for point outlet and SB and with all required hardware accessories to complete the wiring. No junction boxes are allowed any where in the wiring. All joints shall be done at point outlet on switch boards only. In between joints are t allowed anywhere. The wiring shall be done as per IS 732 and IS 4648. a) Making Zari in the wall & same finishing the surface. b) Ball and socket joint wherever required. c) Earthing of fittings d) Electrical connections from the outlet points to the fixture with 3 core flexible wire. e) The size of the wire will be as follows rmal point wiring from SB to point outlet boxes. Phase - neutral : 1.5 sq mm Earth : 1.0 sq mm SB mains from I. P. to SB from I. p. to 5 Amp Plug point for freeze / geyser etc. Phase : Neutral 2.5 sq mm Earth : 1.5 sq. mm Wiring for 15 Amp. Plug point for freeze / geyser etc. Phase - neutral : 4.0 sq mm Earth : 2.5 sq mm Wiring for 20 Amp. Plug point for A. C. 2
Page - 2 Phase -neutral : 4.0 sq mm. Earth : 2.5 sq mm Two parallel 15 Amp. Plug points for first point. Phase -neutral : 4.0 sq mm. Earth : 2.5 sq mm For second point looping. Phase : neutral : 4.00 sq mm Earth : 2.5 sq mm ALL THE POINTS WIRING ARE INCLUDING MAINS CIRCUITS 1.1 One light point controlled by one 5 Amp. Switch 36.00 1 s 1.2 Two light points controlled by one 5 Amp. Switch. 7.00 1 s 1.3 One 5 Amp. 5 pin socket outlet controlled by one 5 Amp. 15.00 1 Switch looped on switch board. s 1.4 Two 5 Amp. 5 pin socket + One 15 Amp. 5 pin socket outlet 14.00 1 controlled by one 15 Amp. Switch with Indicator for computer s UPS POWER. Max. Three Points in One Ckt. (Including 2 x 2.5 sq.mm. + 1 x 1.5 sq. mm. wires from UPS DB to points) 1.5 Two 5 Amp. 5 pin socket outlet controlled by one 5 Amp. 12.00 1 Switch with Indicator for computer RAW POWER. s Max. Three Points in One Ckt. (Including 2 x 2.5 sq. mm. + 1 x 1.5 sq. mm. wires from Raw Power DB to points) 1.6 One 5 Amp. 5 pin socket outlet controlled by one 5 Amp 7.00 1 switch at other convenient location for wall fans. s 1.7 One 5 Amp. 5 pin socket outlet controlled by one 5 Amp 4.00 1 switch at other convenient location for exhaust fans. s 1.8 One 5 Amp. Switch controlled by one electronic fan regulator 6.00 1 for ceiling fan point. s 1.9 One buzzer point controlled by one bell push, with electric type buzzer. s 1.10 One 15 Amp 6 pin socket outlet controlled by one 15 Amp. 3.00 1 Switch with indicator with 2 x 4 sq. mm. + 1 x 2.5 sq. mm.wire s 3
1.11 SITC of 20 A, 230 V, with DP MCB all enclosed in a prefabricated M S boxes complete to the satisfaction of E.I.C. For SPLIT AC 1.5TR /2.0 TR unit with 2 x 4 sq. mm. + 1 x 2.5 sq. mm. wires in PVC pipes. [This point should be installed near split / window AC in concealed manner]. The height of switchboard must be at reachable point for easily operation - from that point to split. AC, empty conduit + necessary bends must in concealed mode by ele. contractor.] with 2 x 4 sq. mm. + 1 x 2.5 sq. mm. wires 2.0 CABLES & CABLE TERMINATIONS : Supplying & laying PVC armoured cable of 1100 V grade of scopper / conductor ( as specified) of following sizes in ready made trench mounted on wall with necessary clamping arrangement or in prelaid RCC hume pipe with necessary cable identification lugs at both ends, digging of trench and its filing with second call bricks, send. The cable shall ISI mark and conforming to latest ISS. All the cable shall be terminated with suitable sizes of Lugs & Glands. 2.1 3c x 6 sq mm Copper Flexible cable with 20/25mm dia PVC rigid conduits 1.5mm thick (for UPS Input / Output) 2.2 4c x 6 sq mm Copper armoured cable (Panel to UPS Input/Ouput DB, Cassetter AC) 2.2 4c x 10 sq mm Copper armoured cable (Panel to LDB & ATM DB) 4 7 1 20.00 1 Mtr 60.00 1 20.00 1 2.3 4c x 16 sq mm Copper armoured cable (Panel to AC-PDB) 15.00 1 2.4 4c x 50 sq mm aluminium armoured cable (SFU to Main Panel)) 50.00 1 2.5 25 sq. mm.single core wire supply & laying for main load wire from meter to main switch SFU UNIT near meter. 15.00 1 3.0 EARTHING 3.1 Providing & erecting Chemical earth pit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe in pipe Techlogy as per IS 3043-1987 made of corrosion free G.I. pipes having outer pipe dia. of 80mm having 80-200 micron galvanising. Inner pipe dia of 40mm having 200-250 micron galvanising. Connection terminal dia. of 14mm with constant ohmic value surrounded by highly condctive compound with high charge dissipation suitable complete in all respect with making of chamber and all for following type of applications. (For UPS & Lighting) with 3 years mfg. warranty. Page - 3
Page - 4 a) (A) for electrical installation up to 440 V length of Copper pipe - 3 Mtr & back filling compund - 1. of bag of 50 Kgs. s b) (A) for electrical installation up to 440 V length of G.I. pipe - 3 Mtr & back filling compund - 1. of bag of 50 Kgs. s 3.2 Supply and laying of 8 SWG G.I. wire in PVC Conduit saddling with minimum distance at 1.5 feet. 60.00 1 3.3 Supply and laying of 8 SWG Copper wire in PVC Conduit 60.00 1 saddling with minimum distance at 1.5 feet. 3.4 Supply and laying of 25 x 3mm G.I. Strip on wall, ceiling etc. with necessary clamps, washers, nuts and bolts etc complete 100.0 1 4.0 SUPPLY & INSTALLATION OF FIXTURES AND FITTINGS: Supply, Installation, testing and commissioning of the following luminaires, fixtures and fittings. The fixtures shall bee installed on wall, false ceiling etc. and as per the manufacturer instructions. The job also includes the connection of the fixture with outlet point using 3 core flexible wire wherever the lighting fixtures are there. 4.1 36 W (2'X 2') concealed/surface mounting fitting 15.00 1 LED 1*36 watt (2'*2') RECESS MOUNTED LUMINAIRE with making earthing connection complete to be recessed in false ceiling with all necessory hardwares, hanging frame arrangement,chains, hook etc., complete. Integral type with CRC boby 50mm deep (CROMPTON model AURA I 1 LCPL- 36 CDL (2X2) or ORIENT MAKE AQUA WTRAQ 36-C OR WIPRO MAKE CRCO10R038HP57 or,philips make.full GLOW RC380B or equivalent 4.2 20 W LED slim Batten fitting (4') 14.00 1 Wipro make Garnet Spectra cat. P08120 and Tube D 612065 or equivalent of Philips / Crompton / Orient 4.3 18 W concealed LED down light fitting 13.00 1 Crompton : LCDD-18-CDL/WW/TL or equivalent of Philips / s Wipro / Orient 5
Page - 5 4.4 15 15 W concealed LED down light fitting 6.00 1 Crompton : LCDD-15-CDL/WW/TL or equivalent of Philips / Wipro / Orient s 4.5 1200 mm Ceiling fan fitting with required fan hook etc. 3.00 1 CROMPTON / Orient MAKE as approved s 4.6 12" Heavy Duty Exhaust Fan (For UPS Room) CROMPTON MAKE s 4.7 300mm Exhaust Fan with Louvers (For Toilets ventilator type) 3.00 1 4.8 18" Wall Fan 3.00 1 CROMPTON MAKE s Supply and installation of 400 mm sweep wall mounted fan with metal stand and guard with metal blades. With on site 2 years warranty (Crompton model SDX super delux Gold or SDX 120. 5.0 PANEL BOARD / DISTRIBUTION BOARDS : 5.1 Providing and Installing of 125A SFU TPN Unit compartment with hinged door & locking arrangement duly fabricated from 18 SGW sheet metal box duly painted with one coat of redoxide paint and two coats of approved enamell paints with 125A OPEN TYPE SFU TPN UNIT with wooden back complete. 5.2 SITC of Main Panels as per drawing and specifications. Panel should be dust and vermin proof, Panel shall be fabricated from 14/16 SWG CRCA sheet metal duly powder coated of approved paints. (MAIN PANEL) 6 125 A TPN SFU (1 No.) as Incoming * 200 A TPN, 440 V, 50 Hz., Cu. Busbar. * Ammeter and Voltmeter with selector switches, control fuses. * Phase indicator lamps phade wise. * Outgoing feeder: * Timer of L & T make Cat. No. 67DDTO digicom Timer with 16A. 4P contactor / Theben make Cat. SUL 180 a - T180 0 001 ANALOG Timer with L & T make contactor MNX 18 (operating coil voltage 230V, 50 Hz). (24 Hrs.) 2 No. for signage light (1 for Branch) * 25 A DP MCB (1 - For GB) * 63 A FP MCB (1 - For LDB) * 63 A FP MCB (1 - For AC DB) * 63 A FP MCB (1 - For PDB) * 63 A FP MCB (1 - For UPS DB) * 40 A FP MCB (1 - For E-Lobby DB) * 63 A FP MCB (1 - For SPARE)
Page - 6 5.3 Supplying and installing, testing and commissioning of DB with following ; ( for ligthing Purpose) 4 Way TPN Double Door Incoming : 63 A FP MCB - 1. & 25A DP ELCB - 3 s. Outgoing : 16/10/25 Amp. SP MCB -6 s. 5.4 Supplying and installing, testing and commissioning of DB with following ; ( for AC Purpose) 6 Way TPN Double Door Incoming : 63 A FP MCB - 1. Outgoing :.0 25A DP MCB - 9 Nos. 5.5 Supplying and installing, testing and commissioning of DB with following ; ( for RAW Power Purpose) 4 Way TPN Double Door Incoming : 63 A FP ELCB - 1. Outgoing : 16/10/25 Amp. SP MCB -12 s. 5.6 Supplying, installing, testing & commission of distribution board with following : ( for UPS Input DB) 12 Way SPN Double Door Incoming : 63 A FP MCB ) - 1. Outgoing : 32/40 DP MCB - 4 No (1. for server input, 1. for E-lobby UPS, 2. for Branch UPS) 5.7 Supplying, installing, testing & commission of distribution board with following : ( for UPS Output units) 8 Way SPN Double Door Incoming : 63 A DP 100mA ( EL + MCB ) -1. Outgoing : 10/16 A SP MCB - 6 s 6.0 INTERCOM TELEPHONE : 6.1 Supply and laying of 2 pair telephone wire ISI marked PVC Insulated 0.63m sq mm. Copper conductor wire same as 12.00 1 clause No. 1 of internal wiring from EPBEX to the various s tables as per the requirement complete with RJ - 11 type Tel. Socket. all respect as per the drawing an Architect or consultant. 6.2 Supply & laying of 20 pair 0.5 sq. mm wire in pvc pipe etc. 30.00 1 6.3 Supply & installation of 20 Pair Krone box s 7.0 LAN / STRUCTURE CABLING WORK : 7.1 Supply and laying of 4 PAIR UTP LAN cable - CAT-6 e 15.00 1 in underground /wall in 1.5mm thick PVC pipe of 25mm dia s with 7
SL ITEM DESCRIPTION QTY. RATE UNIT AMOUNT NO. RS. RS. Page-7 proper junction box for maintenance purpose from Rack/server room to each work station including supply and installation at CAT -6 e information outlet with fore plate and surface/concealed box & RJ-45 Connector one side 7.2 Supply & testing at patch cord. a Length 1 Meter (Make D- link ) 15.00 1 s b Length 2 Meter (Make D- link ) 15.00 1 s 7.3 Supply, intstallation & testing of 9U rack with required power 1.0 1 strip No. 7.4 Supply, intstallation & testing of 24 port patch panel. s 7.5 Removing and Re-installation of existing 24 port switch s 7.6 1.5 X 3C wire with 15 Amp top for power supply in strong room 2.00 1 with Metal type Flexible pipe s 7.7 Laisioning work (addition Load ) WITH Electric supply Co. in branch & Approval and Necessary certificate. 7.8 Removing & Re-fixing of existing 24 Hr. 7 days A.C. timer with powder contactor of M.D.S, L & T SEIMENS, THEBEN make. All enclosed in sheet powder coated enclosure complete with all necessary termination for server room with 2 s contactors from old branch to new premises etc. complete. 7.9 SITC of RG-6 Channel wire for TV line with proper fixing & connecting with modular Co-Axial TV Socket 7.10 S & I of 150 x 150 x 25 mm size GI box including the top cover duly fabricated from 18 SWG m. s. Sheet complete with necessary kck outs at all the sides of box for conduit entries duly fixed in floor, incl. breaking in floor & re-finished the same etc. complete (Wire Draw Box) s s s 10.00 1 s. Total s Rs (Rupees 8
Note : All taxes inclusive except GST will be paid separately as per Govt. rms. Signature & Seal of Contractor Place : Date : 9