Who We Are?

1. Wood, Steel & Aluminum Hardware Accessories International Standards EN Standard 500,000 Cycles ANSI Standard Durability 1,000,000 Cycles UL Standard 100,000 Cycles EN Standards more restrictive compared to the other ones due to performance at the end of durability ( 500.000 cycles ) to be not below 80% ( for ANSI after 1Ml cycles same performance not requested ) but added value element in terms of quality and product life

Part 1 Swing Solutions

Swing Door Solutions 1-Manual Swing Solutions 2- Automatic Swing Solutions

Glass Swing Door Solutions

Different Glass Solutions RP-TP Universal Visur RP Beyond EA

A- Universal Patch Most Commonly used Solution For standard applications

Different Patch Fittings thickness up to 19 mm Max door width 1300 mm &Max height 2500mm Max door weight 130 KG

B-Types of Rail Solutions Using Rails If the weight higher than 130 kg or width >1300mmIn order to protect the door and avoid damage. TP : door rails for center hung TA : door rails for offset hung 76.5 mm width for glass thickness from 8 to 12 mm 100 mm for glass thickness more than 13.5,15,17,21 mm Note Fixing Without any Cutting out of Glass

C Visur Solution A decorative Solution for Glass double Action Doors Without any Visible Fixing.

From Bottom From Top Concealed glass Door closer with transom in case of top Glass Panel,RTS 85 EN 3 (95 cm&60 KG),back check Hold open at 90.

Assembly for the Visur Solution Transom where RTS 85 Fixed in it Max Panel Width 1100mm. Component of Visur Depth of installation 64 mm & diameter of bearing housing 126mm.

Glass Cutting Out

D Beyond Solution Maximum safety and stability in the swing door systems that Preventing the risk of trapped fingers

Short pivoting Rod Suitable for Glass with thickness 10&12 mm Max Panel width 1000 mm incase of fixing to glass Max Panel width 1200 mm incase of fixing to wall

If length is more than 2200 mm we must use continuous pivoting rod continuous pivoting rod Max Panel width 1000 mm incase of fixing to glass Max Panel width 1200 mm incase of fixing to wall

D- EA Solution Single action offset door, hinge to frame or integrated Glass incase of offset applications ( Room Server) Suitable for Glass thickness 8,10,12 mm Max door width 1000 mm Max door weight 80 KG

Assembly Drawing Bottom Patch Top Patch

E-Tensor A Creatively Solution double action door hinge & Self closing For Glass Hold open at angle 90 & self closing start from 80 even at 2 self closing occur. Fixed to Glass Fixed to Wall Max Door Weight 65 KG Available for Glass thickness (8,10,12)mm Min Door Panel Width is 700 mm & Max 1000 mm 500,000 operating cycle test

Fixed to Wall Fixed to Glass

F- Frameless Pivoting Door Short Pivot Continues Pivoting

Suitable for Single and double action glass doors If Door Length is higher than 2 m you should use Continues Pivot

Product Range - Internal Doors DORMA Studio Slim in form and elegant in design DORMA Studio ARCOS Attractive accents in design DORMA Junior Office Reliable and multifunctional DORMA ARCOS Office Strong pieces in glass

Studio Rondo DORMA DORMA Junior Office Classic

FLOOR SPRING (EUROPEAN STANDARD) BTS 65 An inexpensive floor spring for double action doors Available in fixed size, EN 4 Max leaf weight 100 Kg Tested to EN 1154 Fixed hold open point at 90 CE marked BTS 80 Designed for all types of door Available size EN3, EN4, EN5 Max leaf weight 300 Kg Backcheck as standard feature Adjustable hold open Number of optional accessories available for this model Also available are 80F, 80EMB, 80FLB in EN4, EN5 & EN6 BTS 75 V Adjustable size EN 1 4 Max leaf weight 120 Kg Suitalbe for Fire & smoke check doors Backcheck as standard feature Hold open point at 90 or 105 CE marked

Automatic Swing door operator CD 80 ED 100 ED 200 ED 250

DORMA Swing door operator CD80 ED180 ED200 CD400

DORMA Swing door operator ED 100 Electro mechanical operator Closing force: EN 2-4 Door width : 1100mm Door weight : 100 kg Standard Arm & Slide Arm ED100 ED 250 Electro mechanic operator Closing force: EN 4-6 Door width: 1600mm Door weight: 250 kg Standard Arm & Slide Arm ED250

Accessories Radar movement detectors, pushbuttons, card readers, radio control, electronic access control systems, proximity type access control systems, electric strikes, safety sensors for protection of personnel in the opening and closing range, wireless activators

Part 2 Sliding Solutions

Sliding Door Solutions 1-Manual Sliding Solutions 2- Automatic Sliding Solutions

DORMA MANET-Sliding Architectural hardware for furniture Sliding Door system Can be fixed with Glass wall portions Wall or glassed fixed 100 KG Max leaf weight Decorative Solution

Suitable For Residential applications

Suitable For Residential applications Curved Sliding Manet

Product Range - Room Divider DORMA AGILE 150 Flexible and high-power DORMA AGILE 50 Ultra-versatile lightweight DORMA RS 120 The approved sliding door system for highest loads DORMA RSP 80 The approved sliding door system for highest loads

DORMA AGILE 150 Flexible and high-power No Glass Preparation 150 KG Max leaf weight Celling or wall fixing Stainless finish or stain aluminum Finish DORMA AGILE 50 Ultra-versatile lightweight No Glass Preparation 50 KG Max leaf weight Celling or wall fixing Stain aluminum Finish

DORMA RS 120 The approved sliding door system for highest loads For Glass or timber Sliding Solution Max leaf weight 120 KG Tracked predrilled for ease fixing DORMA RSP 80 The approved sliding door system for highest loads For Glass or Timber Sliding Solution Max leaf weight 80 KG Tracked predrilled for ease fixing

ES 200 DORMA Automatic sliding door operator ES 200 EASY ES 200 2D ES 400 EL 301 AL 401

Operator technical data Sliding Door Operator Can Be Carry Weight up to 1000 KG You Can Get a battery Back up Available with different Heights 100,150,200 mm The difference between each operator in weight and applications ES 200

Door Parameters Panel width from 700 to 3000 mm Passage height from 2100 to 3000 mm

Control Main items On/Off Switch Program Switch Emergency Pushbutton Motion Detector Safety Sensor

Accessories Key Switches Rain Protection Cover Remote Control Light barrier

DORMA sliding door operator EL 301 & AL 401 ES 200 Easy : ES 200 : ES 200 2D : ES 200 SST : ES 400 : EL301 : AL401 : 2 x 100 kg 2 x 160kg 2 x 130kg (escape) 2x 100kg (breakout) 1x 200, 2x 125kg (hospital) 2 x 150kg (chain) 2 x 200kg (chain)

DORMA sliding door operator ES200 ES200 Easy ES200-2D

DORMA complete door systems ST TST SST RST FFT BST Sliding doors Automatic telescoping sliding doors Automatic sliding doors with breakout Space-saver Automatic folding doors Curved sliding doors

ST (Compelete Sliding Door Solution) ST

ST ( operator With Breakout) SST

TST Telescopic Mechanism TST

RST Space Saver The system provide max passage width because of Sliding and swing Motion RST Max door width 2000 mm Max door height 2300 mm

DORMA Revolving doors KTV KTV-ATRIUM KTC

Revolving door layout Motion Sensor Door drive Safety sensor Canopy Rotating ceiling Door leaves Side wall Disabled access push button Key switch Core Safety contact strip

KTV (Varioline) and KTC (Comfortline)

KTV (Varioline) and KTC (Comfortline) Comfortline KTC 2 leaves 3600, 4200, 4800, 5400 KTC 3,4 leaves 3600, 4200, 4800, 5400, 6000, 6200 Varioline KTV Atrium 2000, 2200, 2400, 2600, 2800 (full glass door) KTV 3,4 2000 to 3800 (production in UAE)

Revolving door operation mode Manual - Manual Operation Positioning - Manual push to start Servomatic - Door starts at low rpm Automatic I - Door activates as user approaches Automatic II - Door rotates at continuous rpm

Part 3 Timber Solutions

Timber Door Solutions

I. Hinges A. Butt Hinges EN 1935 CE mark Fire Rated (45, 60, 90 min.) 2 Ball Bearing & 4 All Bearing 5 Knuckles For wooden and metal doors Up to 120 kg Different Dimensions Different Sizes Different Finishes Square End and Round End Removable Pin (RP) and Non Removable Pin (NRP)

B. Spring Hinge For Single Action Self-Closing Door Different Sizes Meets ANSI A156.17 UL Listed Stainless Steel Fire rated For Double Action Self-Closing Door Different Sizes UL Listed Meets ANSI A156.17 Stainless Steel Fire rated

C. LM Aluminum Hinges Door widths up to 1200 Door weight up to 120kg Easy to fix only 4 or 6 holes to drill No visible screw connections Rugged and secure attachment

D. Concealed hinge For timber, steel or aluminum frames For flush-fitting architectural structures With a load capacity of 40 to 300 kg With an opening angle of 180 Different sizes From high-quality interior doors to large, heavy-duty doors Fire rated applications Electrified Hinges CE Mark

I. Mortise Locks European Range by Application Timber Doors Steel & Aluminum Doors 200 SSS 304 NFR 200 CE SSS 304 FR 300 SSS 316 NFR 300 CE SSS 316 FR 700 NFR 700-F FR 500 NFR 500-F FR conforming to the technical requirements of DIN 18251 and EN 12209 backset 55 mm, 60 mm, 65 mm, 70 mm, 80 mm forend 20 mm, square / 20 mm, rounded / 24 mm, square / 24 mm, rounded Satin stainless Dead bolt Emergency Escape Locks Narrow Stile Locks Sliding Doors Lock

American Lockset

Euro profile Cylinder Non Master key Master key 5-pin, 6-pin and 7-pin variants available. Length: from 40 mm to 70 mm Different Finishes Different Functions (Double Profile, Half profile, Double with Thumb turn, Half with Thumb turn, and Toilet Cylinder) 3 keys included

American Cylinder Non Interchangeable Core Mortise Cylinders Dummy and Thumb turn Cylinders Interchangeable Core Mortise Cylinders Interchangeable Cores (SFIC) All Finishes Available Master and Non master Key available

Lever Handles

Door Closers Rack and Pinion Concealed Cam Action TS 77 TS 72 TS 90 TS 83 ITS 96 TS 93 TS 97 TS 73 EMF RTS 85 TS 99 EMF

OVERHEAD DOOR CLOSER (EUROPEAN STANDARD) Features TS 68 TS 71 TS 72 TS 73 V TS 77 TS 83 Spring strength EN 2 / 3 / 4 EN 3 / 4 EN 2 4 EN 2 4 EN 3, 4 EN 2 6, 7 External door opening No No No No No Yes Fire & smoke check doors No No No Yes No Yes Non handed Yes Yes Yes Yes Yes Yes Arm type Slim line Standard Standard Standard Flat form Standard Standard Flat form Closing speed adjustment 180 15 15 0 180 15 15 0 180 15 15 0 180 15 15 0 180 20 20 0 By valve Latching action By valve At arm At arm At arm By valve At arm Back check No No No >At valve No >At valve Delay action No No No No No Optional Hold open Optional Optional Optional Optional Optional Optional Certified to EN 1154 EN 1154 EN 1154 EN 1154 CE marked EN 1154 EN 1154 Weight 1.4 Kg 1.2 Kg 1.2 Kg 1.3 Kg 1.3 Kg 3.3 Kg

Miscellaneous

Panic Devices PHA 2000 AD 4000 PHA 3000 Exit pad

From the back side you can control the door by this handle

Thank You