Quality and Innovation Fittings for All-Glass Assemblies Portavant Sliding Door System
Portavant - Quality and Innovation Comfort Stop The damping system for your safety: Slows the glass door effectively, gently and quietly, regardless of its weight and closing speed -- and does so over a distance of several centimetres. Exact Trigger The mechanism for reliable functioning: A revolutionary design principle with patent pending ensures that the damping system is always triggered reliably. System Fit The modular solution for your installation situations: Virtually every imaginable installation is possible with the modular, combinable system components. Auto Close The self-closing system for your well-being: Fully closes the glass door effectively, gently and quietly after it has been slowed down by the innovative damping system. Easy Install The solution for convenient installation without glass cutouts: Makes installation of all-glass sliding doors exceptionally easy. DESIGN SELECT Design Select Perfection combined with diversity for your designer touch: Provides stylistic accents with elegant, sophisticated covers with curved or straight-line designs and offers suitable innovative handles in the finish that you prefer. 2
Profit from all the advantages The traditional reliability of delivery The complete product range is kept in stock in Haan (Germany) and delivered with the high level of reliability that you have come to expect from Bohle. Professional advice You get expert advice and technical support from our qualified technical staff in the office and in the field. With Portavant, too, you benefit from the traditionally high service quality that Bohle offers. Trusted Bohle quality For more than 85 years Bohle has stood for highest quality, topgrade workmanship and a long service life of their products. The well-known Bohle quality can also be found in the products of the Portavant range: Extremely low initial roll resistance (class 3 per DIN EN 1527), resulting in exceptionally smooth running properties Exceptionally long service life (class 6 =100,000 cycles per DIN EN 1527) Corrosion resistance (suitable for indoor damp environments per DIN EN 1527/1670) Maintenance-free components No processing of the glass required The sophisticated clamping technology makes processing of the glass unnecessary. The suspension was developed to ensure that the panes are securely held by the clamp mechanism. But if there is a special need, the clamp mechanism can be combined with a drilled hole in the glass and a securing pin. Adjustable floor guide The elegant floor guide features easy adjustment to accommodate different glass thicknesses. The push-in plastic inserts allow 8 to 12,76 mm glass panes to be securely guided. There is no play in the guide, thus preventing the panes from rattling. The resistance of the floor guide is attuned to the reliable self-closing system. Modular system The modular concept of the system meets the needs of the customer by allowing logistics and warehousing to be maintained. The system components can be combined to suit specific installation situations and individual requirements. Portavant is suitable for toughened as well as laminated safety glass. Easy to install Impressive features of the Portavant are its easy installation and handling simplicity in all types of installation: The pane can be hung from the front onto the mounted top track without difficulty The height of each roller assembly can be adjusted +/- 4 mm to level the glass door The closed position of the door can be adjusted even after the cover profile has been installed Anti-theft and anti-tilt devices can be screw-attached retroactively Technical data Door weight Glass thickness of sliding doors Toughened glass Laminated glass Glass thickness of fixed glazings Toughened glass Laminated glass Roller assemblies Versions 80 kg 8 / 10 / 12 mm 8.76 / 10.76 / 12.76 mm 8 / 10 / 12 mm 8.76 / 10.76 / 12.76 mm High quality precision rollers with plastic cover one and two-door Roller assembly with damping system and self-closing system Profile with optional designer cover on the back side for ceiling mounting 3
Calculation data for ceiling, wall mounting (without fixed glazing) R = ceiling height LW = clear width A = width of sliding glass door H = height of sliding glass door C = length of running track Determining the glass height: H = R 43 Determining the glass width: A = LW + 70 (single door) A = LW/2 + 33 (two doors) 4
Calculation data for ceiling mounting (with sidelight) R = ceiling height LW = clear width A = width of sliding glass door H1 = height of sliding glass door B = width of sidelight H2 = height of sidelight C = length of running track Determining the glass height: H1 = R - 43 (sliding door) H2 = R - 63 (sidelight) Determining the glass width: A = LW + 35 (single sliding door) A = LW/2 + 33 (two sliding doors) B = A + 35 (fixed glazing, one or two) 5
Complete sets for single doors
C Ceiling and wall mounting, single door, complete sets for profile lengths up to 1996 mm (max. door width 975 mm) or 2996 mm (max. door width 1475 mm) Important: For sliding doors up to 80 kg, min. door width: 720 mm Recommended: brush strip (see p. 14) Complete sets, ceiling mounting, single door Complete set 1996 mm, curved cover Single door, profile length 1996 mm 1x curved cover 1x accessory set II curved cover Complete set 1996 mm, straight cover Single door, profile length 1996 mm 1x straight cover 1x accessory set II straight cover BO 52 144 10 1A Aluminium BO 52 144 11 1B Stainless steel look BO 52 144 26 1C Aluminium BO 52 144 27 1D Stainless steel look Complete set 2996 mm, curved cover Single door, profile length 2996 mm 1x curved cover 1x accessory set II curved cover Complete set 2996 mm, straight cover Single door, profile length 2996 mm 1x straight cover 1x accessory set II straight cover BO 52 144 12 2A Aluminium BO 52 144 13 2B Stainless steel look BO 52 144 28 2C Aluminium BO 52 144 29 2D Stainless steel look 7
Complete sets, wall mounting, single door Complete set 1996 mm, curved cover Single door, profile length 1996 mm 1x top track wall mounting 1x curved cover 1x accessory set II curved cover Complete set 1996 mm, straight cover Single door, profile length 1996 mm 1x top track wall mounting 1x straight cover 1x accessory set II straight cover BO 52 144 14 3A Aluminium BO 52 144 15 3B Stainless steel look BO 52 144 30 3C Aluminium BO 52 144 31 3D Stainless steel look Complete set 2996 mm, curved cover Single door, profile length 2996 mm 1x top track wall mounting 1x curved cover 1x accessory set II curved cover Complete set 2996 mm, straight cover Single door, profile length 2996 mm 1x top track wall mounting 1x straight cover 1x accessory set II straight cover BO 52 144 16 4A Aluminium BO 52 144 17 4B Stainless steel look BO 52 144 32 4C Aluminium BO 52 144 33 4D Stainless steel look 8
C = A x 2 Ceiling mounting, single door, complete sets for profile lengths up to 1996 mm (max. door width 975 mm) or 2996 mm (max. door width 1475 mm) Important: Can be used for sliding doors up to 80 kg, min. door width: 720 mm Recommended: brush strip, silicone tape (see p. 14) Complete sets, ceiling mounting with sidelight, single door Complete set 1996 mm, curved cover Single door, profile length 1996 mm 1x curved cover for sidelight 1x accessory set II curved cover Complete set 1996 mm, straight cover Single door, profile length 1996 mm 1x straight cover for sidelight 1x accessory set II straight cover BO 52 144 70 33 Aluminium BO 52 144 71 34 Stainless steel look BO 52 144 78 41 Aluminium BO 52 144 79 42 Stainless steel look Complete set 2996 mm, curved cover Single door, profile length 2996 mm 1x curved cover for sidelight 1x accessory set II curved cover Complete set 2996 mm, straight cover Single door, profile length 2996 mm 1x straight cover for sidelight 1x accessory set II straight cover BO 52 144 72 35 Aluminium BO 52 144 73 36 Stainless steel look BO 52 144 80 43 Aluminium BO 52 144 81 44 Stainless steel look 9
Complete sets for double doors
C Ceiling and wall mounting, double doors, complete sets for profile lengths up to 3996 mm (max. width per door 975 mm) or 5996 mm (max. width per door 1475 mm) Complete sets, ceiling mounting, double doors Complete set 3996 mm, curved cover Double door, profile length 3996 mm 1x curved cover 2x accessory set II curved cover Complete set 3996 mm, straight cover Double door, profile length 3996 mm 1x straight cover 2x accessory set II straight cover BO 52 144 18 5A Aluminium BO 52 144 19 5B Stainless steel look BO 52 144 34 5C Aluminium BO 52 144 35 5D Stainless steel look Complete set 5996 mm, curved cover Double door, profile length 5996 mm 1x curved cover 2x accessory set II curved cover Complete set 5996 mm, straight cover Double door, profile length 5996 mm 1x straight cover 2x accessory set II straight cover BO 52 144 20 6A Aluminium BO 52 144 21 6B Stainless steel look BO 52 144 36 6C Aluminium BO 52 144 37 6D Stainless steel look 11
Complete sets, wall mounting, double doors Complete set 3996 mm, curved cover Double door, profile length 3996 mm 1x top track wall mounting 1x curved cover 2x accessory set II curved cover Complete set 3996 mm, straight cover Double door, profile length 3996 mm 1x top track wall mounting 1x straight cover 2x accessory set II straight cover BO 52 144 22 7A Aluminium BO 52 144 23 7B Stainless steel look BO 52 144 38 7C Aluminium BO 52 144 39 7D Stainless steel look Complete set 5996 mm, curved cover Double door, profile length 5996 mm 1x top track wall mounting 1x curved cover 2x accessory set II curved cover Complete set 5996 mm, straight cover Double door, profile length 5996 mm 1x top track wall mounting 1x straight cover 2x accessory set II straight cover BO 52 144 24 8A Aluminium BO 52 144 25 8B Stainless steel look BO 52 144 40 8C Aluminium BO 52 144 41 8D Stainless steel look 12
Ceiling and wall mounting, double doors, complete sets for profile lengths up to 3996 mm (max. width per door 975 mm) or 5996 mm (max. width per door 1475 mm) Complete sets, ceiling mounting with sidelight, double doors Complete set 3996 mm, curved cover Double door, profile length 3996 mm 1x curved cover for sidelight 2x accessory set II curved cover Complete set 3996 mm, straight cover Double door, profile length 3996 mm 1x straight cover for sidelight 2x accessory set II straight cover BO 52 144 74 37 Aluminium BO 52 144 75 38 Stainless steel look BO 52 144 82 45 Aluminium BO 52 144 83 46 Stainless steel look Complete set 5996 mm, curved cover Double door, profile length 5996 mm 1x curved cover for sidelight 2x accessory set II curved cover Complete set 5996 mm, straight cover Double door, profile length 5996 mm 1x straight cover for sidelight 2x accessory set II straight cover BO 52 144 76 39 Aluminium BO 52 144 77 40 Stainless steel look BO 52 144 84 47 Aluminium BO 52 144 85 48 Stainless steel look 13
Accessories BO 52 144 50 Accessory set A 1x upgrade for damping both sides of doors from 1050 mm, suitable for all complete sets NOTE: Only for use on doors with maximum weight of 80 kg Comfort Stop + Auto Close can be used on one side of doors with a minimum width of 720 mm. Comfort Stop + Auto Close can be used on both sides of doors with a minimum width of 1050 mm. Comfort Stop + Auto Close is also suitable for retrofitting. Curved cover for back side Ceiling mounting To create a curved appearance on the back side of your system Surface Profile length BO 52 144 51 Aluminium 1996 mm BO 52 144 52 Stainless steel look 1996 mm BO 52 144 53 Aluminium 2996 mm BO 52 144 54 Stainless steel look 2996 mm End cap for curved cover Ceiling mounting, can be used on left or right side Brush strip For covers and top tracks Sales unit = 20 m BO 52 144 55 BO 52 144 56 Length 1 m Cover Profile Cover profile for single door Silicone tape Silicone tape for single door Sales unit = 50 m Surface Profile length BO 52 144 57 Aluminium 1996 mm BO 52 144 58 Stainless steel look 1996 mm BO 52 144 59 Aluminium 2996 mm BO 52 144 60 Stainless steel look 2996 mm Surface Profile length BO 52 144 61 transparent 8 mm 1m BO 52 144 62 black 8 mm 1m BO 52 144 63 transparent 10 mm 1m BO 52 144 64 black 10 mm 1m BO 52 144 65 transparent 12 mm 1m BO 52 144 66 black 12 mm 1m 14
End cap for floor-wall profile Can be used on left or right side End cap for ceiling profile Can be used on left or right side BO 52 144 67 BO 52 144 68 Floor-wall profile (U-Profile) Fixed glazing, profile height 16 mm Fixed glazing, profile height 35 mm; Calculation of height of glass panes for the ceiling profile (H3) Your project measures Ceiling height (top edge of profile) = R = Calculation of height of glass panes for fixed glazing for ceiling profile (mm) = H3 = R - 27 mm = Surface Profile length Surface Profile length BO 52 144 42 Aluminium 1996 mm BO 52 144 43 Stainless steel look 1996 mm BO 52 144 44 Aluminium 2996 mm BO 52 144 45 Stainless steel look 2996 mm BO 52 144 46 Aluminium 3996 mm BO 52 144 47 Stainless steel look 3996 mm BO 52 144 48 Aluminium 5996 mm BO 52 144 49 Stainless steel look 5996 mm Ceiling profile (U-Profile) BO 52 144 86 Aluminium 1996 mm BO 52 144 87 Stainless steel look 1996 mm BO 52 144 88 Aluminium 2996 mm BO 52 144 89 Stainless steel look 2996 mm BO 52 144 90 Aluminium 3996 mm BO 52 144 91 Stainless steel look 3996 mm BO 52 144 92 Aluminium 5996 mm BO 52 144 93 Stainless steel look 5996 mm Other versions available on request! 15
Germany South Africa USA United Kingdom and Ireland Bohle AG Dieselstraße 10 D - 42781 Haan Bohle Glass Equipment (Pty) Ltd. Unit 3, Graphite Industrial Park Fabriek Street, Strijdom Park 2125, Gauteng Bohle America, Inc. 10924 Granite Street Suite 200 Charlotte, NC 28273 Bohle Ltd. Fifth Avenue Tameside Park Dukinfield Cheshire SK16 4PP T +49 2129 5568-0 F +49 2129 5568-201 info@bohle.de T +27 11 792-6432 F +27 11 793-5634 info@bohle.co.za T +1 704 247 8400 F +1 704 247 8420 info@bohle-america.com T +44 161 3421100 F +44 161 3440111 info@bohle.ltd.uk 2012-3564 DE, EN