SERIES HYDRAULIC EXCAVATORS CX135SR

CX SERIES HYDRAULIC EXCAVATORS CX135SR

Engine A very low fuel consuming engine which conforms to European requirements for low exhaust emission Tier 2 in accordance with directive 97/68/EC. Engine rotation speed checking via an electric potentiometer. Manual return to idle control on RH control lever. High performance filtration circuit enables oil change intervals to be extended to every 500 h. Make... ISUZU Type:... BB-4BG1T Turbo... Yes Electronically controlled fuel injection Number of cylinders... 4 Bore x stroke... 105 x 125 mm Capacity... 4329 cm 3 Power at 2100 rpm EEC 80/1269... 65.6 kw - 88 hp 2

Hydraulic system 2 variable displacement axial piston hydraulic pumps feeding attachments in one-piece, two-pieces or offset machine configuration, travel and swing. Maximum flow...2 x 117.2 l/min 1 gear pump feeding the dozer blade and the offset boom swing Maximum flow...1 x 54 l/min Safety valve pressure: Attachments... 350 bar Swing... 285 bar Travel... 350 bar Dozer blade, offset boom swing... 210 bar CONTROL VALVES 4-spool control valve for left track travel, boom, bucket and dipper acceleration. 5-spool control valve for right track travel, dipper, swing, ausiliary circuit/positioning cylinder and boom acceleration. 2-spool valve for dozer blade and offset boom swing. FILTRATION Hydraulic system components protected by ULTRA CLEAN filter which filters out particles larger than 1µ and also traces of condensation water. SWING Fixed displacement, axial piston swing motor Upperstructure swing speed 10 rpm Planetary reduction gear with automatic braking by oil bath disc brakes. System and component capacities Hydraulic reservoir... 81 l Hydraulic system... 125 l Travel reduction gear (per side)... 2,5 l Swing reduction gear... 3 l Engine oil (with filter change)... 15 l Fuel tank... 165 l Cooling system... 17,7 l TRAVEL Variable displacement, axial piston hydraulic motors. Planetary reduction gear with automatic braking by oil bath disc brakes. Two travel speeds (selected on the instrument panel) and automatic Down-Shift. High speed... 5 kph Low speed... 3.2 kph High performance filtration for longer hydraulic fluid life-time (fluid change interval now 5000 hours). Electrical system Voltage... 24 v Alternator...50 A/h Starter motor...24 v, 4.5 kw Batteries... 2 x 12 v, 64 A/h 3

Undercarriage LC type undercarriage providing excellent stability (as a result of its length) and loading capacity comparable to machines of standard dimensions. Steel tracks, with or without rubber pads, are available. Carrier and track rollers equipped with bushings and seals. Travel motors protected and incorporated in the undercarriage. Track tension adjustable by grease cylinder. SPECIFICATIONS Number of carrier rollers...1 Number of track rollers... 6 Number of track pads... 43 Type of track pads...triple grousers Steel track pad widths..500, 600 and 700 mm Standard track pad size...600 mm Optional... Steel chains and rubber track pads Rubber track pad width...500 mm Gradeability...70% (35 ) Front chain guide DOZER BLADE Dozer blade control lever at console height to the right hand side of the cab. Blade movement provided by two hydraulic cylinders equipped with cylinder rod protection. Dozer blade width... 2.49 m Dozer blade height... 0.57 m Max. raising height... 0.44 m Maximum underground lowering depth... 0.52 m 4

Upperstructure The short radius CX135SR has special specifications compared to standard models: Ø 3,30 m Shorter upperstructure radius for the rear part The boom foot is positioned close to the upperstructure swing axis so as to have the minimum attachment front swing radius. Cab is within the upperstruc ture swing radius. The width of the upperstructure is smaller than the width of the undercarriage (also using 500 mm track pads). 3 m Counterweight and general stability of the machine provides lifting capacities identical to standard machines. 6 m Cab With CASE, reduced dimensions of the machine do not mean reduction in space for the operator. The cab of the CX135SR has the same comfort level as the standard CX models. It is integrated into the upperstructure, does not reduce manoeuvrability on 360 swing and has sufficient width for the operator s maximum comfort plus all the advantages of a standard machine. Mechanical suspension, multiadjustable driver s seat, instrument panel and control console to the right and left of the seat, control lever supports which are adjustable in relation to the seat, dozer blade control lever, twopiece windscreen with a retractable upper portion (and a storage compartment to the rear LH of the seat). The cab roof has a large glass window, enabling continuous checking of the bucket position when the attachment is fully retracted. For operator comfort, the cab is insulated from vibration and noise by four elastofluid mountings. 5

Attachments To meet user requirements, CASE "short radius" crawler excavators are suitable for every type of work-site. These machines are mainly used on the following types of work: Construction and maintenance of high speed roads and urban streets. Construction in residential areas Demolition Forestry work Machine hire companies To ensure best possible profitability in the various sorts of work encountered, the machine has to be able to be changed to a new configuration quickly and easily. THE CASE ANSWERS A choice of undercarriages with or without dozer blade. A complete choice of booms: one - piece articulated offset Granting customers to get the best performances in each jobsite. A choice of different dipper lengths MULTIFIT quick coupler Supply to the most varied types of implement, using supplementary hydraulic functions (swing, tool orientation, etc.) Reduced maintenance costs using EMS (Easy Maintenance System) which is standard on the boom foot and head linkages. This system, which is also used on the heavy CX machines, provides a considerable reduction in maintenance intervals (every 1000 h). Buckets General purpose SAE capacity Litres 190 260 330 450 560 640 720 800 Width mm 350 450 600 750 900 1000 1100 1200 Weight kg 265 300 325 375 420 450 480 520 Heavy duty SAE capacity Litres 450 640 720 Width mm 750 1000 1100 Weight kg 424 509 542 Other types of bucket on application. RESPECT OF ENVIRONMENT Case CX135SR respects the European reduced noise level as per directive 2000/14/EC Phase 2. 6

General dimensions 2.42 m Monobloc boom 1.17 m 1.25 m R = 1.48 m 2.75 m 0.44 m 2.75 m CX135SR 0.88 m 0.44 m 0.60 m 2.78 m 1.99 m 2.59 m 5.49 m 7.24 m 3.51 m 0.51 m 0.52 m Weight and ground pressure 500 mm Shoes - Bucket Weight Ground operator and full fuel tank (kg) pressure (bar) 4.75 m Monobloc boom - 2.40 m dipper 13200 0.38 4.75 m Monobloc boom - 2.40 m dipper with dozer blade 14100 0.38 Performance data with monobloc boom dipper: 2.40 m 2.85 m A Maximum digging reach 8.20 m 8.55 m B Maximum digging reach at ground level 8.05 m 8.45 m C Maximum digging depth 5.45 m 5.90 m D Digging depth 2.44 m (8 ) level bottom 5.25 m 5.70 m E Maxi dump height 6.90 m 7.10 m F Overall reach height 9.30 m 9.50 m G Minimum swing radius 1.80 m 2.25 m H Vertical straight wall dig depth 4.85 m 5.05 m Digging force 6390 dan 5680 dan Breakout force 8970 dan 8970 dan 7

CX135SR General dimensions 2.42 m Articulated boom 1.17 m 1.25 m R = 1.48 m 2.75 m 0.44 m 2.73 m CX135SR 0.88 m 0.44 m 0.60 m 1.99 m 2.59 m 5.51 m 7.27 m 2.78 m 3.51 m 0.51 m 0.52 m Weight and ground pressure 500 mm Shoes - Bucket Weight Ground operator and full fuel tank (kg) Pressure (bar) 4.74 m Articulated boom - 2.40 m dipper 13960 0.45 4.74 m Articulated boom - 2.40 m dipper with dozer blade 14860 0.48 Performance data with articulated boom 10m 30' 25' 20' 15' 10' 5' 0 9m 8m 7m 30 ' 25' 6m 5m 4m 3m F E G 20' 15' 2m 1m 0 1m 2m 3m C D H A B 5' 10' 4m 5m 15' 6m 2,44 m 20' 7m 10m 9m 8m 7m 6m 5m 4m 3m 2m 1m 0 dipper: 2.40 m 2.85 m A Maximum digging reach 8.27 m 8.65 m B Maximum digging reach at ground level 8.13 m 8.52 m C Maximum digging depth 5.24 m 5.68 m D Digging depth 2.44 m (8 ) level bottom 5.12 m 5.56 m E Maxi dump height 6.99 m 7.24 m F Overall reach height 9.39 m 9.64 m G Minimum swing radius 2.00 m 2.49 m H Vertical straight wall dig depth 4.43 m 4.85 m Digging force 6390 dan 5680 dan Breakout force 8970 dan 8970 dan 8

CX135SR General dimensions 2.42 m Offset boom - 2.10 m dipper 1.17 m 1.25 m R = 1.48 m 2.75 m 0.44 m 2.87 m CX135SR 0.88 m 0.44 m 0.60 m 1.99 m 2.59 m 5.28 m 6.95 m 2.78 m 3.51 m 0.51 m 0.52 m Weight and ground pressure 600 mm Shoes - Bucket Weight Ground operator and full fuel tank (kg) Pressure (bar) Offset boom and 2.10 m dipper with dozer blade 14200 0.38 Performance data with offset boom and 2.10 m dipper 9m 30' 25' 20' 15' 10' 5' 0 30' 8m 25' 7m 6m 5m 4m 3m 2m 1m 0 1m 2m 3m 4m 5m 6m 10m F C 9m H D 8m 7m 6m E G B A 2.44 m 5m 4m 3m 2m 1m 20' 15' 5' 10' 15' 20' 0 Maximun offset Zero offset A Maximum digging reach 7.10 m 7.55 m B Maximum digging reach at ground level 6.95 m 7.35 m C Maximum digging depth 4.55 m 4.95 m D Digging depth 2.44 m (8 ) level bottom 4.20 m 4.65 m E Maxi dump height 5.85 m 6.20 m F Overall reach height 8.20 m 8.60 m G Minimum swing radius 1.95 m 2.20 m H Vertical straight wall dig depth 3.30 m 3.65 m Digging force 5950 dan 5950 dan Breakout force 8930 dan 8930 dan Maximum working range (zero offset) Trench with vertical walls (maximum offset) 1.155 m 1.185 m 0.215 m Lifting capacity CX135SR with dozer blade down, 4.50 m offset boom, 2.10 m dipper, 600 mm shoes and bucket 7 m 6 m 2680* 2030* 4.40 5 m 3070* 3100* 2560* 1980* 5.30 4 m 3870* 3700* 3300* 2610 2020* 1940 5.80 3 m 6380* 5860 5050* 3600 4200* 2450 2690* 1750 2140* 1660 6.20 2 m 7870* 5090 5770* 3250 4700* 2270 3510* 1660 2340* 1500 6.30 1 m 8810* 4520 6340* 2950 5020* 2100 4170* 1560 2650* 1420 6.30 0 m 8120* 4240 6600* 2750 5190* 1970 4260* 1480 3170* 1420 6.20-1 m 8360* 4150 6510* 2640 5120* 1810 4090* 1510 5.80-2 m 7830* 4170 6030* 2620 4720* 1880 4400* 1740 5.30-3 m 6520* 4280 5050* 2690 4480* 2300 4.40-4 m 4300* 4200* 3.10 9

Lifting capacity CX135SR with 4.75 m monobloc boom, 2.40 m dipper, 600 mm shoes and bucket 7 m 6 m 3140* 2430* 1930* 5.30 5 m 3520* 3190* 2800 1940* 1460* 6.20 4 m 4370* 4300* 3960 3870 2720 2830 1980 1450* 6.70 3 m 10120* 6710* 6020 5280* 3740 3740 2610 2760 1920 1490* 1470 7.00 2 m 8340* 5500 5190 3510 3600 2480 2680 1850 1970* 1420 1570* 1380 7.10 1 m 8180 5110 4960 3300 3470 2360 2610 1780 2040 1380 1700* 1340 7.10 0 m 3410* 7890* 4920 4800 3160 3370 2260 2550 1720 1910 1360 7.00-1 m 5090* 7870 4860 4720 3080 3310 2210 2510 1680 2150 1440 6.70-2 m 6950* 7880 4870 4700 3070 3290 2190 2510 1680 2400 1610 6.20-3 m 9100* 7040* 4930 4740 3100 3320 2220 2890 1940 5.50-4 m 6320* 5120* 5070 3980* 3200 3370* 2710 4.50 CX135SR with 4.75 m monobloc boom, 2.85 m dipper, 600 mm shoes and bucket 7 m 2710* 1820* 1800* 5.00 6 m 2910* 2650* 1670* 5.90 5 m 3070* 3010* 2870 2470* 2070 1620* 6.60 4 m 3530* 3450* 2790 2880 2030 1690* 1520 1620* 1500 7.00 3 m 6950* 5610* 4800* 3840 3810 2660 2800 1960 2150 1480 1660* 1360 7.30 2 m 7570* 5680 5280 3580 3650 2520 2710 1870 2100 1430 1750* 1280 7.50 1 m 8290 5200 5010 3340 3500 2380 2620 1790 2050 1380 1850 1240 7.50 0 m 3780* 7960 4920 4810 3160 3380 2270 2550 1720 2000 1340 1870 1250 7.30-1 m 4990* 7810 4800 4690 3060 3290 2190 2490 1670 1980 1320 1960 1310 7.00-2 m 6520* 7780 4770 4640 3010 3260 2160 2470 1650 2160 1440 6.60-3 m 8440* 7710* 4810 4660 3030 3260 2160 2530 1690 5.90-4 m 7970* 6110* 4920 4730 3090 3330 2230 3320 2220 5.00 3570* 2970* 3.60 CX135SR with dozer blade down, 4.75 m monobloc boom, 2.40 m dipper, 600 mm shoes and bucket 7 m 2460* 2220* 4.18 6 m 3150* 2440* 1530* 5.49 5 m 3520* 3200* 2940 1950* 1460* 6.19 4 m 4360* 4290* 4140 3880* 2860 2920* 2090 1460* 6.66 3 m 6680* 6290 5260* 3920 4480* 2740 3720* 2030 1490* 6.96 2 m 8310* 5750 6060* 3680 4910* 2610 4210* 1950 1970* 1500 1570* 1470 7.10 1 m 8860* 5360 6680* 3460 5270* 2480 4400* 1880 2160* 1460 1700* 1430 7.10 0 m 7910* 5170 6960* 3320 5460* 2390 4480* 1820 1910* 1450 6.96-1 m 8990* 5100 6860* 3250 5410* 2330 4380* 1780 2240* 1530 6.66-2 m 8270* 5110 6400* 3230 5060* 2320 3980* 1780 2800* 1710 6.19-3 m 7010* 5180 5510* 3260 4290* 2340 3680* 2060 5.49-4 m 5090* 3950* 3370 3350* 2860 4.48 CX135SR with dozer blade down, 4.75 m monobloc boom, 2.85 m dipper, 600 mm shoes and bucket 7 m 2690* 1810* 1790* 5.01 6 m 2890* 2630* 1650* 5.94 5 m 3050* 2990* 2460* 2170 1600* 6.59 4 m 3500* 3430* 2910 2990* 2120 1680* 1590 1600* 1580 7.03 3 m 5580* 4770* 4010 4160* 2780 3590* 2050 2350* 1550 1640* 1430 7.31 2 m 7530* 5930 5630* 3750 4630* 2640 4020* 1960 2830* 1510 1730* 1340 7.45 1 m 8860* 5450 6380* 3500 5060* 2490 4260* 1880 3170* 1460 1870* 1310 7.45 0 m 8930* 5170 6820* 3320 5340* 2380 4410* 1800 3220* 1410 2080* 1320 7.31-1 m 9130* 5040 6890* 3210 5410* 2300 4410* 1750 2560* 1390 2400* 1380 7.03-2 m 8700* 5020 6600* 3170 5210* 2270 4180* 1730 2940* 1510 6.59-3 m 7670* 5060 5930* 3180 4660* 2280 3630* 1780 5.94-4 m 6070* 5170 4720* 3250 3530* 2340 3510* 2330 5.02 3530* 2930* 3.60 - Lift capacities in accordance with SAE J 1097 / ISO 10567 / DIN 15019-2 - Lift capacities shown in kg do not exceed 75% of the tipping load or 87% of the hydraulic lift capacity. - Capacities that are marked with an asterisk are hydraulic limited. - If the machine is equipped with a quick coupler, subtract the weight of the quick coupler from the load shown in the tables to calculate the real lifting capacity. 10

Lifting capacity CX135SR with 4.74 m articulated boom, 2.40 m dipper, 600 mm shoes and bucket 7 m 6 m 3180* 2630* 5326* 2.19 5 m 3450* 3250* 2870* 2210* 2020 6303* 1.40 4 m 4110* 4140* 4100* 3850* 2910 2870 2030 6768* 1.40 3 m 12180* 7350* 6400 5410* 4070 3990 2870 2850 2010 1670* 1420 7060* 1.43 2 m 11110* 8790 6060 5590 3960 3930 2730 2810 1930 2080 1380 7202* 1.50 1 m 9920* 8780 5820 5460 3870 3760 2680 2720 1840 2030 1340 7202* 1.61 0 m 13080* 12000 8640 5720 5390 3620 3610 2440 2630 1760 1990 1310 7061* 1.78-1 m 12630* 11440 8630 5390 5170 3420 3500 2340 2530 1670 6768* 2.05-2 m 13470* 11190 8420 5220 4910 3200 3370 2220 2490 1630 6304 2.32-3 m 13070* 11200 8120* 5050 4820 3120 3350 2200 5625* 2.12-4 m CX135SR with 4.74 m articulated boom, 2.85 m dipper, 600 mm shoes and bucket 7 m 2810* 2100* 5121* 1.93 6 m 2730* 1830* 6089* 1.66 5 m 2970* 3000* 2940 2600* 2100 6721* 1.59 4 m 3360* 3380* 3000 2930 2100 1950* 1500 7158* 1.58 3 m 6210* 5180* 4640* 4060 3990 2960 2910 2070 2160 1500 7435* 1.61 2 m 12310* 8610* 6310 5550 4090 3910 2890* 2850 2040 2140 1440 7570* 1.68 1 m 11790* 8660 6020 5380 3850* 3830 2750 2750 1940 2080 1390 7570 1.79 0 m 12560* 12360 8660* 5860 5270 3700 3770 2590 2650 1780 2020 1330 7436 1.81-1 m 13410* 11550 8720 5460 5220 3470 3520 2350 2570 1710 1960 1270 7159 1.90-2 m 13710* 11160 8430 5220 5040 3310 3430 2270 2490 1630 6722 2.08-3 m 13890* 11040 8310 5130 4850 3140 3290 2140 2450* 1620 6090* 2.34-4 m 10110* 6090* 4940 3760* 3070 1830* 5066* 1.75 CX135SR with dozer blade down, 4.74 m articulated boom, 2.40 m dipper, 600 mm shoes and bucket 7 m 6 m 3180* 2630* 2190 5.30 5 m 3450* 3250* 2670 2210* 1830 1430 6.30 4 m 4110* 4140* 3850 3850* 2670 3070* 1840 1410 1390 6.80 3 m 12180* 7350* 5910 5410* 3750 4430* 2630 3440* 1820 1670* 1260 1430 1240 7.10 2 m 11110* 9100* 5900 6370* 3640 4910* 2490 4030* 1740 2300* 1220 1500 1160 7.20 1 m 9920* 9310 5710 6900* 3550 5320* 2440 4340* 1650 2520* 1180 1610 1120 7.20 0 m 10980 9400* 5220 6890* 3290 5400* 2200 4380* 1570 2120* 1150 1780 1130 7.10-1 m 10420 9470* 4900 6930* 3100 5440* 2090 4140* 1480 2050 1200 6.80-2 m 10170 9520 4730 6780* 2870 5010* 1980 3090* 1440 2510 1340 6.30-3 m 10180 8120* 4550 5480* 2790 3570* 1950 2120 1630 5.60-4 m CX135SR with dozer blade down, 4.74 m articulated boom, 2.85 m dipper, 600 mm shoes and bucket 7 m 2810* 2100* 1930 5.10 6 m 2730* 1830* 1660 6.10 5 m 2970* 3000* 2770 2600* 1950 1590 1490 6.70 4 m 3360* 3380* 2760 3060* 1950 1950* 1340 1580 1280 7.20 3 m 6210* 5180* 4640* 3740 4080* 2720 3300* 1880 2560* 1340 1610 1140 7.40 2 m 11700 8610* 5820 5830* 3760 4590* 2680 3810* 1840 2910* 1280 1680 1060 7.60 1 m 11660 9320* 5530 6790* 3660 5170* 2510 4120* 1740 3040* 1220 1790 1030 7.60 0 m 11340 9340* 5370 6820* 3370 5350* 2350 4390* 1590 3170* 1170 1970 1030 7.40-1 m 10530 9340* 4970 6850* 3140 5370* 2110 4270* 1510 2970* 1110 2240 1080 7.20-2 m 10140 9490* 4730 6960* 2990 5360* 2030 3870* 1440 2680 1190 6.70-3 m 10020 9190* 4630 6410* 2810 4140* 1900 2450* 1430 2340 1400 6.00-4 m 9930 6090* 4450 3760* 2750 1830* 1750 6.10 - Lift capacities in accordance with SAE J 1097 / ISO 10567 / DIN 15019-2 - Lift capacities shown in kg do not exceed 75% of the tipping load or 87% of the hydraulic lift capacity. - Capacities that are marked with an asterisk are hydraulic limited. - If the machine is equipped with a quick coupler, subtract the weight of the quick coupler from the load shown in the tables to calculate the real lifting capacity. 11

Standard Equipment One-piece boom or double offset boom High performance ULTRA CLEAN (1µ) filtration system Auxiliary control valve section Undercarriage with or without Dozer blade 500, 600 or 700 mm steel track pads Rubber track pads 500 mm 2 travel speeds Load-holding valves (boom and dipper) Tier 2 engine (reduced smoke emissions and noise level) Electronically motor speed control Manual engine speed return to idle RH, LH and rear rear-view mirror (safety when swinging and revers Options Single-acting system ( hammer type) Multipurpose circuit (hammer or shears) Double-acting circuit (shears, etc.)* 2nd auxiliary circuit (clamshell orientation type)* Backhoe-clamshell circuit* MULTIFIT Hydraulic quick coupler Electric pump for refuelling FOPS cab protection Self-regulating air conditioning Safety valves (boom - dipper) * Note: availability of these circuits varies depending on the type of boom and length of the dipper Standard and optional equipment can vary from country to country NOTE: Standard and optional fittings can vary according to the demands and specific regulations of each country. The illustrations may include optional rather than standard fittings - consult your Case dealer. Furthermore, CNH reserves the right to modify machine specifications without incurring any obligation relating to such changes. CNH UK Ltd. Armstrong House The Finningley Estate Hayfield Lane Doncaster DN9 3XA Fax +44 (0)1302 802126 WORLDWIDE CASE CONSTRUCTION EQUIPMENT CONTACT INFORMATION EUROPE/AFRICA/MIDDLE EAST: CENTRE D AFFAIRES EGB 5, AVENUE GEORGES BATAILLE - BP 40401 60671 LE PLESSIS-BELLEVILLE - FRANCE NORTH AMERICA/MEXICO: 700 STATE STREET RACINE, WI 53404 U.S.A. LATIN AMERICA: AV. GENERAL DAVID SARNOFF 2237 32210-900 CONTAGEM - MG BELO HORIZONTE BRAZIL ASIA PACIFIC: UNIT 1-1 FOUNDATION PLACE - PROSPECT NEW SOUTH WALES - 2148 AUSTRALIA CHINA: No. 29, INDUSTRIAL PREMISES, No. 376. DE BAO ROAD, WAIGAOQIAO FTZ, PUDONG, SHANGHAI, 200131, P.R.C. Conforms to directive 98/37/CE Form No. 26051039GB - Printed in Italy - LEADER Firenze - 04/06