Table of Contents 1 Hydraulic Valves Needle Valves TMN Series FFG 2000 Series FFA 2000 Series 2-3 4-5 6-7 Check Valves C Series 8-9 Flow Controls TMF Series 10-11 Low Pressure Ball Valve S95 NPT Series 12-13 Ball Valves 2 Way Ball Valve 3 Way Ball Valve Mini Ball Valve Locking Kits 14 15 16 16
2 TMN SERIES NEEDLE VALVES Designed for extremely precise control of air and hydraulic fluids Features Easy-to-read colour bands and micrometer knob provide exact flow settings Re-set repeatability within 1% Precision machined double-step stem with fine pitch thread provides accurate control, even at extremely low flows Rugged, all-metal construction no plastic parts Brazed construction to withstand high pressure Set screw provided to secure valve setting Steel valves are zinc-plated and sealed with black chromate for double corrosion protection Specifications Maximum Operating Pressure Temperature Range Stem Taper Stem Pitch CV Factor 5,000 psig (345 bar) -20 ºF to 400 ºF (-29 ºC to 204 ºC) 2 º x 45 º double step 40 threads/inch (15.7 threads/cm) See Ordering Information Materials Body Stem Knob Colour Bands Set Screw Stem Packing Performance TMN Series Pressure Drop Stem full open 12L 14 Steel Stainless Steel Brass Anodized Aluminum Steel Viton "O" ring with Teflon Backup PRESSURE DROP (PSIG) 250 200 150 100 50 0 1/4 1/2" 3/4" 1" 0 5 10 15 20 25 30 35 40 45 50 FLOW (GPM)
Hydraulic Valves 3 Dimensions Size (P) Port Female (D) Body Square (L) Length (E) Screw Max. 1/4" 1/4 NPT 0.81 20.57mm 2.00 50.80mm 1.38 34.93mm 3/8 NPT 1.00 25.40mm 1.72 43.64mm 1/2" 1/2 NPT 1.13 28.57mm 2.63 66.67mm 2.25 57.15mm 3/4" 3/4 NPT 1.50 38.10mm 3.25 82.55mm 2.47 62.69mm 1 1 NPT 2.00 50.80mm 4.25 107.95mm 3.88 98.43mm Ordering Information Size Part Number Orifice Diameter CV 1/4" TMN250S 0.156 3.958mm 0.47 TMN375S 0.72 1/2" TMN500S 0.312 7.937mm 1.07 3/4" TMN750S 0.375 9.525mm 1.71 1 TMN1000S 0.625 15.875mm 2.45
4 FFG 2000 SERIES NEEDLE VALVES Ideal for applications which require fine metering and positive shut-off. Designed for use with air, oil, water, steam, liquid fuels and most chemicals. Features Heavy duty construction for strength and safety up to 10,000 psi (690 bar) Precision-machined stems and valve bodies provide perfect seat alignment for leak-free shut-off Carbon steel valves are zinc plated and sealed with black chromate for double corrosion protection Available in panel or in-line mounted configuration 303 and 316 stainless steel valves available on special order Specifications Maximum Operating Pressure Min. Burst Pressure Temperature Range Stem Taper Sizes 1/8 to 1/2" Stem Taper Sizes 3/4 to 1" Stem Pitch Sizes 1/8 to 1/2 Stem Pitch Sizes 3/4 to 1" CV Factor 10,000 psig hyd. (690 bar)/2,000 psig air (138 bar) 20,000 psig (1380 bar) -40ºF to 500ºF (-40ºC to 296ºC) 10.5º 15º 16 threads/inch 14 threads/inch See Ordering Information Materials Body Stem Bonnet Nut Handle Stem Packing Panel Mounting Kit Valve Size:1/8 to 1/4 3/8 to 1/2 3/4 to 1 Performance 12L 14 Carbon Steel 303 Stainless Carbon Steel Aluminum Teflon Kit #: KIT2002S KIT2004S KIT2005S PRESSURE DROP (PSIG) 200 180 160 140 120 100 80 60 40 20 0 1/8" 1/4" 1/2" 3/4" 1" 0 5 10 15 20 25 30 35 40 45 50 FLOW (GPM) FFG Series Pressure Drop - Stem full open
Hydraulic Valves 5 Dimensions Size (P) Port Female (B) Max. (D) (E) (F) Square (G) (H) 1/8" 1/8 NPT 3.50 88.90mm 1.94 49.21mm 0.88 22.23mm 0.38 9.52mm 0.63 15.88mm 1/4" 1/4 NPT 3.50 88.90mm 2.06 52.39mm 0.88 22.23mm 0.38 9.52mm 0.63 15.88mm 3/8 NPT 3.63 92.08mm 2.75 69.85mm 1.13 28.58mm 0.38 9.52mm 0.75 19.05mm 1/2" 1/2 NPT 3.63 92.08mm 2.75 69.85mm 1.13 28.58mm 0.38 9.52mm 0.75 19.05mm 3/4" 3/4 NPT 5.19 131.70mm 3.63 92.08mm 4.25 107.95mm 1.50 38.10mm 0.88 22.23mm 1.50 38.10mm 1 1 NPT 5.31 134.92mm 4.06 103.19mm 4.25 107.95mm 2.00 50.80mm 0.88 22.23mm 1.50 38.10mm Ordering Information Size Part Number Orifice Diameter CV 1/8" FFG2001T 0.66 1/4" FFG2002T 0.66 FFG2003T 0.70 1/2" FFG2004T 0.70 3/4" FFG2006TA 0.562 14.287mm 3.90 1 FFG2008TA 0.562 14.287mm 5.22
6 FFA 2000 SERIES NEEDLE VALVES Ideal for applications which require fine metering and positive shut-off. Designed for use with air, oil, water, steam, liquid fuels and most chemicals. Features Heavy duty construction for strength and safety up to 10,000 psi (690 bar) Precision-machined stems and valve bodies provide perfect seat alignment for leak-free shut-off Carbon steel valves are zinc plated and sealed with black chromate for double corrosion protection Available in panel or in-line mounted configuration 303 and 316 stainless steel valves available on special order Specifications Maximum Operating Pressure Min. Burst Pressure Temperature Range Stem Taper Sizes 1/8 to 1/2" Stem Taper Sizes 3/4 to 1" Stem Pitch Sizes 1/8 to 1/2 Stem Pitch Sizes 3/4 to 1" CV Factor 10,000 psig hyd. (690 bar)/2,000 psig air (138 bar) 20,000 psig (1380 bar) -40ºF to 500ºF (-40ºC to 296ºC) 10.5º 15º 16 threads/inch 14 threads/inch See Ordering Information Materials Body Stem Bonnet Nut Handle Stem Packing Panel Mounting Kit Valve Size:1/8 to 1/4 3/8 to 1/2 3/4 Performance 12L 14 Carbon Steel 303 Stainless Carbon Steel (zinc plated) Aluminum Teflon Kit #: KIT2002S KIT2004S KIT2005S PRESSURE DROP (PSIG) 200 180 160 140 120 100 80 60 40 20 0 1/8" 1/4" 1/2" 0 5 10 15 20 25 30 35 40 45 50 FLOW (GPM) 3/4" FFA Series Pressure Drop - Stem full open
Hydraulic Valves 7 Dimensions Size (P) Port Female (B) Max. (D) (E) 1/8 1/4 3/8 1/2 3/4 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 3.50 3.50 3.63 3.63 5.19 88.90mm 88.90mm 92.08mm 92.08mm 131.76mm 1.50 1.78 2.16 2.16 2.72 38.10mm 45.24mm 54.77mm 54.77mm 69.06mm 4.25 107.95mm (F) Square (G) (H) Diameter (I) 1.00 1.00 1.25 1.25 1.75 25.40mm 25.40mm 31.75mm 31.75mm 44.45mm 0.38 0.38 0.38 0.38 0.88 9.52mm 9.52mm 9.52mm 9.52mm 22.23mm 0.63 0.63 0.75 0.75 1.50 15.88mm 15.88mm 19.05mm 19.05mm 38.10mm 1.06 1.06 1.59 1.59 1.94 26.99mm 26.99mm 40.48mm 40.48mm 49.21mm Ordering Information Size Part Number Orifice Diameter CV 1/8 1/4 3/8 1/2 3/4 FFA2001T FFA2002T FFA2003T FFA2004T FFA2006TA 0.562 14.287mm 0.92 0.92 1.10 1.10 4.43
8 C S E R IE S C H E C K V A L V E S Specifications Ordering Informa tion Size Material Crack ing Pressure Threads
Hydr aulic V alves 9 Dimensions Code A thread B C Rated Flow Weight
12 Low Pressure Ball Valve S95 NPT Series Ball valves - Full Port 1/4"- 4" Hot Forged Brass Features 1 - S95 Unplated NPT body 2 - Seat 00-84 3 - Chrome plated ball 4 - S92 unplated NPT end cap 5 - Nickel plated stem O-ring design 6 - Nut 7 - Green O-ring 8 - Yellow steel handle Options (up to 2" size) Stem extension T-handle for valves up to 1" Round handle Patented locking device AISI 430 stainless steel handle AISI 316 stainless steel ball and/or stem Filled glass PTFE seals Custom design Note: Approvals apply to specific configurations only Specifications: Hot forged, unplated brass body to DIN 17660 and UNI 5705-65 specifications Approved in sizes up to 4" by American gas association (AGA), Canadian gas association (CGA) Approved in sizes up to 2" by Underwriters Laboratories (UL), Canadian Underwriters Laboratories (CUL), Factory Mutual (FM), IAPMO (UPC) and meeting WW-V-35C Federal U.S. Specifications up to 4". Full port for maximum flow Seals tested to guarantee zero leakage Teflon self-lubricating seats with flexiblelip design Double seal system permits flow in both directions Chrome plated brass ball for longer life No metal-to-metal moving parts Blowout-proof nickel plated brass stem Two Viton O-rings at the stem for maximum safety No Maintenance required Handle stops on body to avoid stresses at valve stem Removable carbon steel handle with PVC coating Handle clearly indicates flow direction NPT taper ANSI B.1.20.1 female port threads Silicone-free lubricant on all seals Max. non-shock cold working pressure: 600 psi for valves up to 2", 450 psi for valves over 2" Temperature range: -40ºF to +350ºF
Hydraulic Valves Dimensions 1/4 ¼NPT D DN I L G A H 1/2 3/8NPT ½NPT Valve Size 3/4 1-½" 1" 1-¼" 2" ¾NPT 1NPT 1-¼NPT 1-½NPT 2NPT 0.79 1.57 0.98 1.26 1.97 2-½" 3" 2-½NPT 3NPT 4" 4NPT IN. 0.31 0.39 0.59 2.56 3.15 3.94 MM 8.0 10.0 15.0 20.0 25.0 32.0 40.0 50.0 65.0 80.0 100.0 IN. 0.47 0.47 0.61 0.67 0.83 0.91 0.91 1.04 1.26 1.38 1.63 MM 12.0 12.0 15.5 17.0 21.0 23.0 23.0 26.5 32.0 35.0 41.5 IN. 1.77 1.77 2.32 2.52 3.19 3.66 4.02 4.76 6.14 6.97 8.50 MM 45.0 45.0 59.0 64.0 81.0 93.0 102.0 121.0 156.0 177.0 216.0 IN. 0.89 0.89 1.16 1.26 1.59 1.83 2.01 2.38 3.07 3.48 4.25 MM 22.5 22.5 29.5 32.0 40.5 46.5 51.0 60.5 78.0 88.5 108.0 IN. 3.23 3.23 3.94 4.72 4.72 6.22 6.22 6.22 10.04 10.04 10.04 MM 82.0 82.0 100.0 120.0 120.0 158.0 158.0 158.0 255.0 255.0 255.0 2.13 2.87 3.11 3.39 5.20 5.51 6.06 54.0 73.0 79.0 86.0 132.0 140.0 154.0 IN. 1.50 1.50 1.69 1.97 MM 38.0 38.0 43.0 50.0 Ordering Information Product Type S95 Ball Valve Low Pressure Valve Size 1" Threads B41 1/4" F41 C41 G41 1 1/4" M41 3" D41 1/2" H41 1 1/2" N41 E41 3/4" I41 2" L41 2 1/2" 4" NPT SAE (special order) 13
14 2 Way Ball Valves Specifications Body Steel Ball Steel Temperature Range -14ºF - 212ºF Ball Seals Delrin Shaft Seals Buna N Dimensions Model Size A B C D E F G H L M SW LW 1/4" 1.38" 2.80" 1.65" 1.57" 0.67" 2.87" 1.73" Full Bore 1/2" 3/4" 1.69" 2.17" 0.71" 0.91" 3.27" 3.74" 1.89" 2.44" 1" 2.56" 1.42" 4.45" 2.60" Reduced Bore 1-1/4" 1-1/2" 1-1/4" 2.56" 2.56" 3.31" 1.42" 1.42" 1.65" 4.76" 4.76" 4.53" 2.60" 2.60" 3.74" Full Bore 1-1/2" 3.86" 1.89" 5.16" 4.25" 2" 4.06" 2.03" 5.51" 4.53" Ordering Information 0.43" 0.43" 0.43" 0.53" 0.53" 0.53" 1.93" 2.13" 2.24" 2.87" 3.27" 3.27" 3.27" 3.98" 4.53" 4.72" 1.18" 1.38" 1.46" 1.77" 2.17" 2.17" 2.17" 3.31" 4.01" 4.25" 4.33" 4.33" 4.33" 0.63" 0.63" 0.67" 0.87" 0.94" 1.06" 1.10" 1/4" 1/2" 3/4" 1" 1-1/4" 1-1/2" 1-1/4" 1-1/2" 2" 0.35" 0.35" 0.35" 0.24" 0.39" 0.79" 1.26" 1.58" 1.97" Model Part # Ports Part # Ports Working Pressure Weight Locking Kit Part # Full Bore Reduced Bore Full Bore GE2 N 1/4" GE2 N GE2 N 1/2" GE2 N 3/4" GE2 N 1" GE2 N 1-1/4" R GE2 N 1-1/2" R GB2 N 1-1/4" GB2 N 1-1/2" GB2 N 2" 1/4" NPT NPT 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT 1-1/2" NPT 1-1/4" NPT 1-1/2" NPT 2" NPT GE2 SAE4 GE2 SAE6 GE2 SAE8 GE2 SAE12 GE2 SAE16 GE2 SAE20 GE2 SAE24 GB2 SAE20 GB2 SAE24 GB2 SAE32 SAE-4 SAE-6 SAE-8 SAE-12 SAE-16 SAE-20 SAE-24 SAE-20 SAE-24 SAE-32 7250 PSI 7250 PSI 7250 PSI 5800 PSI 1.00 lb 1.25 lb 1.61 lb 3.00 lb 4.80 lb 5.25 lb 5.25 lb 8.25 lb 12.75 lb 14.25 lb GE-LK-6 GE-LK-6 GE-LK-6 GE-LK-20 GE-LK-20 GE-LK-20 GE-LK-20 GB-LK GB-LK GB-LK Many other options available. Please consult MP Filtri (Canada) Inc.
3 Way Ball Valves 15 Specifications Body Steel Ball Steel Temperature Range -14ºF - 212ºF Ball Seals Delrin Shaft Seals Buna N L-Ported diverter valve Dimensions Pressure Center port only Model Size A B C D E F G H I L M SW LW Full Bore Reduced Bore Full Bore 1/4" 1/2" 3/4" 1" 1-1/4" 1-1/4" 1-1/2" 2" 1.38" 1.57" 1.69" 2.17" 2.56" 2.56" 3.31" 3.86" 4.05" 0.67" 0.71" 0.91" 1.42" 1.42" 1.65" 1.89" 2.03" 2.80" 2.87" 3.27" 3.74" 4.45" 4.76" 4.53" 5.16" 5.51" 1.65" 1.73" 1.89" 2.44" 2.60" 2.60" 3.74" 4.25" 4.53" 0.43" 0.43" 0.43" 0.53" 0.53" 0.53" 1.93" 2.13" 2.24" 2.87" 3.27" 3.27" 3.98" 4.53" 4.72" 1.18" 1.38" 1.46" 1.77" 2.17" 2.17" 3.31" 4.02" 4.25" 4.33" 4.33" 4.33" 1.32" 1.46" 1.57" 2.04" 2.32" 2.42" 2.83" 3.19" 3.35" 0.63" 0.63" 0.67" 0.87" 0.94" 1.06" 1.10" 1/4" 1/2" 3/4" 1" 1-1/4" 1-1/4" 1-1/2" 2" 0.35" 0.35" 0.35" 0.24" 0.39" 0.79" 1.26" 1.58" 1.89" Ordering Information Model Part # Ports Part # Ports Working Pressure Weight Locking Kit Part # Full Bore Reduced Bore Full Bore GE3 N 1/4" GE3 N GE3 N 1/2" GE3 N 3/4" GE3 N 1" GE3 N 1-1/4" R GB3 N 1-1/4" GB3 N 1-1/2" GB3 N 2" 1/4" NPT NPT 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT 1-1/4" NPT 1-1/2" NPT 2" NPT GE3 SAE4 GE3 SAE6 GE3 SAE8 GE3 SAE12 GE3 SAE16 GE3 SAE20 N/A N/A N/A SAE-4 SAE-6 SAE-8 SAE-12 SAE-16 SAE-20 N/A N/A N/A 5800 PSI 5800 PSI 1.00 lb 1.25 lb 1.61 lb 3.00 lb 4.80 lb 5.25 lb 8.25 lb 12.75 lb 14.25 lb GE-LK-6 GE-LK-6 GE-LK-6 GE-LK-20 GE-LK-20 GE-LK-20 GB-LK GB-LK GB-LK
16 Mini Ball Valves Specifications Body Ball Temperature Range Steel Nickel Plated Steel Between -14ºF + 212ºF Ball Seals Shaft Seals Delrin Buna N Dimensions Part # A B C D E F G H L M SW LW GEM 1/4" NPT 1111AB 0.49" 2.48" 1.85" 0.27" 1.26" 2.24" 0.67" 1/4"NPT 0.24" 0.24" GEM 1/4" SAE 1111AB 0.49" 2.48" 1.85" 0.27" 1.26" 2.24" 0.67" SAE-4 0.24" Ordering Information Part # Ports Working Pressure Weight GEM 1/4" NPT 1111AB 1/4" NPT 7250 PSI 0.50 lb GEM 1/4" SAE 1111AB SAE-4 7250 PSI 0.50 lb Locking Kits Specifications New design allows for increased security. Kits are field installable. Constructed of zinc plated carbon steel Ordering Info. If ordering factory installed add -LK to the end of the ball valve # i.e.: GE2-N-1/4"-LK 0.24" Value Size Kit # 1/4"-1/2" GE-LK-6 3/4"-1 1/2" reduced bore GE-LK-20 1 1/2"-2" full bore GB-LK