505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications
The 505F Series Ball Valve The 505F is a true multi-way stainless steel ball valve with balanced four seat construction. This full port valve is available in a variety of flow plans, which can replace multiple two-way valves in a process system. The standard configuration has an ISO 5 pattern mounting pad allows for easy assembly of most pneumatic and electric actuators. ISO 5 Mounting Pad High-Cycle, Live-Loaded Stem Packing Full Port Construction Multi-Position Lever Handle Positioning Pin Multiple Flow Configurations Standard Features and Benefits Balanced 4-Seat or 5-Seat Construction Unlike two-seated diverter valves, the 505F series has four seats (five seats in bottom entry valves) for positive shut-off in the closed position. This true multiport function can reduce the number of valves required in a process system and gives engineers greater design flexibility Trunnion Mounted Ball ( / - 4 ) Lateral forces in a 3-way valve can cause unwanted seat distortion. Stem/ball isolation prevents side-loading and wear of downstream seats, improving performance and service life ISO 5 Mounting Pad For Easy Actuation High-Cycle, Live-Loaded Stem Packing ynamic loading on stem packing ensures a tight seal through varying pressure and temperature conditions, extending service life and reducing maintenance costs O-Ring Stem Bearing (3 and 4 ) Maintains stem alignment Reduces packing side-loading and wear Enhances stem seal performance Blow-Out-Proof Stem Stem is bottom loaded to prevent removal when valve is in service Full Port esign Full port construction improves flow characteristics for greater process efficiencies Multi-Position Lever Handle The lever handle can be positioned in four different orientations for greater piping flexibility Options 4 or 5-Way Construction With Multiple Flow Patterns Multiple End Connections Available Test Reports Available Upon Request Pressure (PSI) 000 800 600 400 00 505F Pressure/Temperature Chart (RTFE Seats) /4-3 - 4 0-40 0 00 00 300 400 450 Temperature ( F) Operating Conditions Temperature range (RTFE): - 40 F ~ 450 F Maximum pressure (RTFE): 000 PSI CWP (/4 - ) 600 PSI CWP (3-4 ) Specifications All valves shell and seat tested to ANSI/ASME B6.34 and API 598 All materials comply with applicable ASTM material specifications End connections: All to ASME B6.34 NPT to ASME B.0. Socket Weld to ASME B6. Butt Weld to ASME B6.5
/ - 0 Valve Components No. Part Name Qty Body CF8M End Cap CF8M 3 9 4 5 7 6 5 3 0 3 End Cap (Blind) CF8M 4 Ball 36 SS 5 Stem 36 SS 6 Seat RTFE (5% C.F.) 4 7 Body Seal PTFE 4 8 Body Bolt 304 SS 6 9 Body Bolt Washer 304 SS 6 0 Thrust Washer PEEK Stem O-Ring VITON 75 Stem Set Pin 36 SS 3 Stem Packing Set PTFE 4 Packing Gland 304 SS 3 8 4 6 7 9 8 5 Belleville Washer 30 SS 4 6 Gland Nut 304SS 7 Gland Nut Lock Washer 304SS 8 Stop Pin 304SS 9 Stop Plate 304SS 0 Handle 304SS Handle Nut 304SS 5 4 3 Handle Cover Vinyl 3 Trunnion* 36 SS 4 Trunnion Bearing* PEEK 5 Trunnion Gasket* PTFE 6 6 Trunnion Bolt* 304 SS 3 * / and Only M F G 4 x d H E P S L L imensions (Inches) Size L L P M H E F G d (mm) S ISO 5 Cv Weight (lbs) /4" 3.40.70 0.43 5.8.4 0.93 0.9 0.44.97 M6 x.00 5 0.35 F05 3.3 3. 3/8" 3.40.70 0.43 5.8.4 0.93 0.9 0.44.97 M6 x.00 5 0.35 F05 4.5 3. /" 4.06.03 0.59 5.8.6. 0.93 0.50.97 M6 x.00 6 0.35 F05 7.9 5. 3/4" 4.4. 0.79 6.6 3.0..7 0.55.97 M6 x.00 6 0.43 F05 4.3 6. " 4.76.38 0.98 7.7 3.6.4.46 0.64.76 M8 x.5 7 0.43 F07.8 8.8 /4" 5.0.60.6 9.9 4..57.96 0.86.76 M8 x.5 8 0.55 F07 37.5.5 /" 5.89.94.57 9.9 4.5.9.98 0.86 4.0 M0 x.50 9 0.55 F0 56.8 0.5 " 7.30 3.65.97.3 5.3.34.4 0.84 4.0 M0 x.50 9 0.67 F0 96. 34.4 *Cv value represents flow data to ISA 75.0.0-007 based on 505F Side with L-Port Flow Configuration
3-4 Valve Components 3 4 9 7 8 3 5 6 5 5 4 9 0 4 8 7 6 9 No. Part Name Qty Body CF8M End Cap CF8M 3 3 End Cap (Blind) CF8M 4 Ball 36 SS 5 Stem 36 SS 6 Seat RTFE (5% C.F.) 4 7 Seat Housing 36 SS 4 8 Seat Housing O-Ring VITON 4 9 Body Seal PTFE 3 0 Body Seal (Large) PTFE Body Bolt 304 SS 0 Body Bolt Washer 304 SS 0 3 Thrust Washer PEEK 3 4 Stem Set Pin 36 SS 0 8 5 Stem Packing Set PTFE 7 6 Packing Gland 304 SS 6 7 Belleville Washer 30 SS 4 8 Gland Nut 304 SS 9 Gland Nut Lock Washer 304 SS 0 Stop Pin 304 SS Stop Plate 304 SS Pipe Handle 304 SS 3 Handle Bolt 304 SS 4 Handle rive Coupling 304 SS 5 Stem Bearing PEEK 6 Trunnion 36 SS 7 Trunnion Bearing PEEK 8 Trunnion Gasket PTFE 9 Trunnion Bolt 304 SS 4 4 x d S M B Stem View H F G E P L L imensions (Inches) Size L L P M H E F G d (mm) S ISO 5 Cv Weight (lbs) 3" 9.7 4.86.9.0 7.7 3..36 0.70 4.0 M0 x.50 0 0.87 F0 3.0 54.3 4".68 5.84 3.78 3.0 8.4 3.88.30 0.70 4.0 M0 x.50 0 0.87 F0 37.0 89. *Weights based on NPT Ends *Cv value represents flow data to ISA 75.0.0-007 based on 505F with L-Port Flow Configuration
Flow Pattern Options 3 Way - Side T-Port (5T) 0 90 A & B 0 90 B & C 03 90 C & 04 90 & A 4 80 A & B & C 3 80 B & C & 34 80 C & & A 4 80 & A & B 3 00 360 All Position Position C 3 Way - Bottom 80 L-Port (3A) 0 90 A & B 0 90 B & C 80 A & B & C 3 Way - Side L-Port (5L) 0 90 A & B 3 Way - Bottom 90 Angle Port (4A) 0 90 A & B Position C 4 Way - Bottom L-Port (6A) 0 90 A & B 0 90 B & C 80 A & B & C 00 360 All 4 Way - Side ouble L-Port (7) 0 90 A & B 00 360 All Position C 4 Way - Bottom ouble L-Port (6Y) 0 90 A & B 5 Way - Bottom Angle Port (8A) 0 90 A & B 00 360 All 3 Way - Bottom 80 T-Port (3B) 0 90 A & B 3 Way - Bottom 80 ouble L-Port (3Y) 0 90 A & B
irect Mount Products Automation Systems 505F Ordering Information Example: Multi-Port Ball Valve with ISO 5 Pattern Mounting Pad, Lever Handle and Positioning Pin, Full Port, 36 SS Body and Trim, RTFE (5% C.F.) Seats, PTFE Seals, NPT Ends, 3-Way Side, L-Port, Flow Pattern 0* 505F 6 6 6 6 C T TT 5 L 0 Valve Series 505F - Full Port Valve Size 5 7 A C E F G / 3/4 / / 3 4 Body 6 - A35 Gr. CF8M (36) End 6 - A35 Gr. CF8M (36) 3 - A35 Gr. CF3M (36L) Ball Stem Seat 6-36 SS 6-36 SS C - RTFE (5% C.F.) R - RTFE (5% G.F.) M - TFM T - PTFE Seal T - PTFE M - TFM End Connection T - NPT S - Socket Weld - Butt Weld Sch. 0 4 - Butt Weld Sch. 40 G - Grooved Port Ball Configuration Configuration 3-3 Way 80 Bottom 4-3 Way 90 Bottom 5-3 Way Side 6-4 Way Bottom 7-4 Way Side 8-5 Way Bottom A - Bottom L-Port B - Bottom T- Port - Side ouble L-Port L - Side L-Port T - Side T-Port Y - Bottom ouble L-Port Flow* Pattern 0 - A & B (Standard) 00 - All 0 - B & C 03 - C & 04 - & A - A & B & C 3 - B & C & 34 - C & & A 4 - & A & B Not available in 4-way Side- ouble L-Port (7) *See Flow Pattern Options ue to continuous product development, information may change without notice istributed by: INLINE INUSTRIES, INC. 9056 Garvey Avenue Rosemead, CA 9770 Tel: (800) 568-8998 (66) 83-688 Fax: (66) 83-686 www.ballvalve.com info@ballvalve.com 07 Inline Industries. All rights reserved. 0706.V3.8