Seating................................................ 1546-1555 Tables................................................. 1556-1557 Computer Supplies.................................... 1558-1561 Safes..........................................................1562 Filing & Storage Systems............................... 1563-1568 General Office Supplies...1569,1572-1575,1577-1581,1583-1584 Mail Boxes....................................................1576 Key Cabinets & Key Chains............................. 1570-1571 Office Lighting................................................1582 Water Coolers......................................... 1585-1586
SEATING THE CHAIR ONE OF THE MOST IMPORTANT COMPONENTS OF A PROPER WORKSTATION IS THE CHAIR! The type of work being performed in the office often dictates what kind of chair is required. The size of the person doing the work might also affect the proper choice. This guideline is intended for most users, but accomodating the extremes in a person's height, weight, physical disability, etc., is a fact of life and must be part of the planning process. The chair should have a seat back with lumbar support capable of both up-and-down and front-and-back adjustment. The seat back should provide support to both the lower back and the shoulders and enable the person to sit comfortably upright without slouching To accomodate the height of the user, the chair height with respect to the floor should be adjustable The seat pan should be capable of tilting and it should have a contoured or waterfall front Hip angle: 90-120 Knee angle: 90-130 Ankle angle: 100-120 The front edge of the seat should curve away and down from the back of the person's legs to promote circulation in the lower legs. Tilting transfers weight from your hips to your legs, encouraging normal back curve and reducing pressure on the discs in the lower spine The seat pan and backrest should be upholstered and cloth covered with a fabric that is breathable. Seat padding should not compress more than one inch when an individual is seated The height of the armrests needs to be adjustable with respect to the seat pan. Adjustable height arm rests relieve tension in the upper back, neck, and shoulders, by allowing the user's arms and wrists to be in parallel position. They also provide resting planes To accomodate the breadth of the user's lower torso, the office chair armrests should be capable of in and out adjustment and that adjustment needs to be independent of the seat pan The chair should be capable of swiveling at least 360 To prevent the possibility of tipping, the chair should have five casters. The type of casters depends on the flooring material. Use hard casters for carpeted floors. Use soft casters for hard wood vinyl or when used on chair mats Look for chairs with a built-in tilt tension mechanism that controls the rate and ease with which the chair reclines to different weights and strengths of the user. This allows the user freedom to rock/shift in the chair, while not disturbing the original ergonomic settings 1405 & 1410 PREMIUM SERIES CHAIRS Offers all you require in a task and operator chair. From molded foam cushions to "one touch" ergonomic chair controls. Gas lift height adjustment Black onyx Back height and depth adjustment Seat and back angle adjustment on 1410 Series Optional arms and stool kit available Dual wheel carpet casters Charcoal OE744 OE748 No. Seat Dimensions Back Dimensions Black Onyx Charcoal Description W" x D" x H" W" x H" /Each OE744 OE745 1405 Series chair 17 1/2 x 18 x 17-22 1/2 16 1/4 x 14 210.00 OE746 OE747 1405 Series w/stool kit 17 1/2 x 18 x 22-27 16 1/4 x 14 272.00 OE748 OE749 1410 Series multi functional 17 1/2 x 18 1/2 x 18-23 1/2 17 1/2 x 15 276.00 TASK CHAIRS & ECONOMICAL STENO CHAIRS Pneumatic height adjustments Backrest height adjustments Five prong nylon base Dual wheel carpet casters Stool kit available Optional arms Optional glides (recommended with stool kit) No. Seat Dimensions Back Dimensions Wt. Black Onyx Charcoal Description W" x D" x H" W" x H" lbs. /Each ECONOMICAL STENO CHAIRS OC310 OC309 w/o arms 18 x 17 x 17-22 16 1/2 x 11 1/2 30 204.00 OC312 OC311 w/t-arms 18 x 17 x 17-22 16 1/2 x 11 1/2 32 295.00 OE093 OE092 w/stool kit 18 x 17 x 22-27 16 1/2 x 11 1/2 35 266.00 TASK CHAIRS OE095 OE094 w/stool kit 18 x 17 x 24-30 16 1/2 x 13 1/2 35 337.00 OPTIONS FOR CHAIRS Black onyx Charcoal OC311 with stool kit (OA269) OE095 No. OA271 /Each $78.60 Loop Arm Kit (width adjustable) No. OC323 /Each $97.70 T-Arm Kit (width and height adjustable) No. OA269 /Each $67.70 Stool Kit 1546
IBEX MULTI-TILTER ARM CHAIRS Ergonomic features include adjustable arm height, seat angle and seat height Comfortable air-flow mesh back Seat height: 17.5" to 21.5" Caster type: Dual wheel carpet casters Weight capacity: 300 lbs. Overall dimensions: 27" L x 26" W x 39.5" H SEATING OP299 Black, Fabric 316.00 OP300 Charcoal, Fabric 316.00 OP301 Black, Vinyl 316.00 OP302 Charcoal, Vinyl 316.00 OP300 OP302 SERENITY TM BIG & TALL LEATHER SEATING Designed especially for the big and tall person 500-lb. capacity Pneumatic seat height adjustment (measured from floor to top of seat): 19 1/2"-22 1/2" H Seat: 21 1 2" W x 22" D 360 swivel Tilt tension Back tilt lock 2 1/2" dual wheel carpet casters Black leather Seat Dimensions Back Dimensions No. Description W" x D" x H" W" x H" /Each ON715 High-back leather chair 26 x 26 x 45 1/2-48 1/2 22 x 26 655.00 ON716 Mid-back leather chair 26 x 26 x 42 1/2-48 1/2 22 x 23 629.00 ON715 ON716 IBEX TASK CHAIRS Ergonomic features include adjustable arm height, seat height and seat depth Comfortable air-flow mesh back Seat height: 16" to 20" Caster type: Dual wheel carpet casters Weight capacity: 300 lbs. Overall dimensions: 26.5" L x 26" W x 37" H OP288 Black, Fabric 276.00 OP303 Charcoal, Fabric 276.00 OP289 Black, Vinyl 276.00 OP304 Charcoal, Vinyl 276.00 OP288 OP304 CIERRA TM HEAVY DUTY ERGONOMIC CHAIRS Comfortably supports workers up to 400 lbs. Thick contoured dual density seat and backrest foam cushions Pneumatic, soft descent seat height adjustment, 19-23.75" Backrest height adjustment Extra heavy-duty multi-tilter mechanism Tilt-tension adjustment Forward seat tilt-lock control Seat depth adjustment (seat slider) Height and width adjustable T arms with soft urethane flat arm pad Seat: 24" W x 20" D Backrest: 24" H x 20" W Weight capacity: 400 lbs. Overall dimensions: 20" L x 24" W x 24" H OP256 Black, Fabric 851.00 OP257 Blue, Fabric 851.00 OP258 Grey, Fabric 851.00 OP256 OP257 1547
SEATING ACTIV A-47 MESH CHAIRS Contoured backrest with adjustable lumbar support Breathable mesh fabric on backrest Contoured foam seat cushion Pneumatic seat height adjustment, 18-22.75" Height adjustable arms with urethane armcaps Tilt-tension adjustment Synchronized seat and back movement in 2:1 ratio Seat: 19.5" W x 19.5" D Backrest: 24" H x 18.25" W Colour: Black Material: Mesh Fabric Weight capacity: 250 lbs. Overall dimensions: 19.5" L x 19.5" W x 22.75" H Greenguard TM certified No. OP249 /Each $375.00 DANIO ARMLESS TASK CHAIRS Ergonomic features include adjustable seat height and seat depth Hinged back with scuff resistant outer shroud Stitched leather detail Seat height: 16" to 21" Caster type: Dual wheel carpet casters Colour: Black Material: Vinyl Weight capacity: 300 lbs. Overall dimensions: 22.5" L x 18.5" W x 34" H No. OP314 /Each $138.00 ACTIV A-43 MID-BACK MESH-CHAIRS Tilt mechanism with lockout feature and tension adjustment Height and depth adjustable lumbar support Optional height and tilt adjustable headrest Back is 22" height and 19 1/2" width Seat is 20" width and 19 1/2" depth Height and width adjustable armrests Fabric: Standard black Black base and gas cylinder Custom upholstery available OK208 Mid back mesh-chair 336.00 ON573 Head rest 37.50 ACTIV A-99 MID-BACK MESH SYNCRO-TILTER CHAIRS Contoured backrest with integral lumbar support Breathable mesh fabric on backrest Contoured foam seat with black fabric as standard Adjustable pneumatic seat height 18" - 21 1/2" H Seat: 19 1/2" W x 19" D Back: 22" H x 19" W Height and width adjustable arms Synchro-Tilt (2:1 ratio) with infinite tilt lock Tilt tension adjustment Includes premium carpet casters No. ON711 /Each $288.00 ACTIV A-618 LEATHER MANAGER'S CHAIRS Thick padded and contoured seat and back for superior comfort Seat is 21 3/4" width and 21" depth Back is 24" height and 21 1/2" width Back features built-in lumbar support which allows increased relaxation of the back Contoured armrests for increased support Pneumatic seat height adjustment from 18" to 22" A tilt mechanism with lockout Tension adjustment Contoured backrest shaped to fit the contours of the body Soft-touch leather like fabric No. OK390 /Each $288.00 1548 ON573 OK208 ACTIV A-45 HIGH-BACK MESH SYNCRO-TILTER CHAIRS Contoured backrest shaped to fit the contours of the body Lumbar support allows increased relaxation of the back Breathable mesh fabric backrest High density seat cushion Adjustable pneumatic seat height 18 1/4" - 21 1/2"H Seat: 19 3/4" W x 19 1/4" D Back: 21 1/2" H x 19" W Synchronized seat and back movement in a 2:1 ratio with infinite tilt-lock tension adjustment Armrests: height adjustable, rotate horizontally 30º inwards towards the centre of the seat or outwards Includes premium carpet casters No. ON710 /Each $358.00 ACTIV A-37 MESH CHAIRS Contoured backrest with adjustable lumbar support Breathable mesh fabric on backrest Injection molded foam seat Pneumatic seat height adjustment, 17.5-21" Comfortable and durable armrests with height, pivot and telescopic adjustments Advanced synchro-tilt mechanism with multiple locking positions Tilt-tension adjustment Sliding seat adjusts and locks in various positions to suit a wide variety of users Seat: 19" W x 20" D Weight capacity: 250 lbs. Material: Mesh Fabric LOW BACK Backrest: 22" H x 18" W Overall dimensions: 20" L x 19" W x 22" H HIGH BACK Height adjustable headrest Backrest: 29" H x 18" W Overall dimensions: 20" L x 19" W x 29" H Seat No. Colour /Each LOW BACK OP264 Black 403.00 OP265 Dark Blue 420.00 OP266 Grey 420.00 OP269 OP264 Seat No. Colour /Each HIGH BACK OP267 Black 455.00 OP268 Dark Blue 472.00 OP269 Grey 472.00
CIERRA TM PETITE SERIES ERGONOMIC CHAIRS Designed to meet the needs of the petite users (under 5'2" and weighing less than 250 lbs.) High density seat and backrest cushions Pneumatic, soft descent seat height adjustment, 19-23.75" Backrest height adjustment Independent, infinite position back and seat angle adjustment with tilt lock control Tilt-tension adjustment Forward seat tilt-lock control Seat depth adjustment (seat slider) Height adjustable T arms with soft urethane flat arm pad Seat: 17" W x 18" D Backrest: 24" H x 17" W Weight capacity: 300 lbs. Overall dimensions: 18" L x 17" W x 24" H OP250 Black, Fabric 526.00 OP251 Blue, Fabric 526.00 OP252 Grey, Fabric 526.00 CIERRA TM ERGONOMIC CHAIRS High density seat and backrest cushions Pneumatic, soft descent seat height adjustment, 19-23.75" Backrest height adjustment Independent, infinite position back and seat angle adjustment with tilt lock control Tilt-tension adjustment Forward seat tilt-lock control Seat depth adjustment (seat slider) Height adjustable T arms with soft urethane flat arm pad Seat: 20" W x 19" D Backrest: 24" H x 19" W Weight capacity: 250 lbs. Overall dimensions: 19" L x 20" W x 24" H OP253 Black, Fabric 526.00 OP254 Blue, Fabric 526.00 OP255 Grey, Fabric 526.00 ADJUSTABLE FOOTRESTS Unique footplate has a rubber non-slip cover providing optimal comfort Tilt and height adjustments Easily adjust angle with a single foot Surface dimensions of 15" W x 11" D Black and grey finish No. ON706 /Each $49.70 ADJUSTABLE FOOTRESTS Fixed at a comfortable 8 angle to relieve muscle strain Removable 14-gauge platform has nine elevation positions which lock into place with a double locking pin Black powder coat paint finish and textured anti-slip covering on the platform Dimensions: 20" W x 12" D x 5.5" H - 15" H No. FC684 /Each $188.00 OP250 OP254 SUPPORTECH TM ERGONOMIC CHAIRS Multi-tilt control for custom adjustment Gas lift height adjustment Tension adjustable swivel/tilt with locking free float Height adjustable contoured backrest Height adjustable armrests Five prong plastic (glass reinforced) base Dual wheel carpet casters Seat dimensions: 20" W x 18 1/2" D x 19-24" H Back dimensions: 19" W x 21" H Black onyx Charcoal No. Black Onyx Charcoal /Each OC359 OC360 589.00 LEATHER CHAIRS High back tilter with pneumatic seat height adjustment from 16" to 20" Upright position tilt lock with tension control knob Dual wheel carpet casters for easy movement on carpet Black leather seat with mock leather back and trim Ideal for home or office Dimensions: 25 1/2" W x 28" D x 43" H No. OK049 /Each $173.00 OC360 STEP STOOLS Tough one piece poly construction with anti-skid bottom Threaded top and expanded step 16" diameter base provides added stability Glides easily on retractable rubber casters 13" overall height Capacity: 300 lbs. Weight: 7 lbs. No. Colour /Each OA299 Black 149.00 OA300 Beige 149.00 HEAVY-DUTY STEEL STEP STOOLS Comes with a double platform with non-slip rubber tread Spring-loaded casters retract under slight pressure, forcing base to the floor 11" diameter upper platform and 13 1/2" diameter lower platform 17 1/4" diameter base has an all-around protective bumper 16 1/2" overall height Wt. 10 lbs. Colour: Black No. ON528 /Each $89.95 SEATING 1549
SEATING SWIVEL STOOLS Seats made of 19-gauge embossed steel with 1/8" tempered hardboard inlay 1" diameter, 16-gauge steel frame all-welded tubing Circular 18-gauge footrest guarantees comfort and stability Heavy-duty rubber cushioned steel glides protect floors 1" x 14 1/2" long steel adjustment stem for easy height selection on all units s FC661 and FC665 have 9 1/2" x 15 3/4" 4-way adjustable backrest Optional casters available: FC675 s FC673 and FC674 come with a padded seat FC658 FC661 FC665 FC673 DELUXE SWIVEL STOOLS These padded stools will provide workers with maximum comfort and support 360 swivel motion is ideal for workers who have repetitive side to side movement Seat easily adjusts to your selected height, just raise or lower the steel rod and lock securely in place 2" foam over a 1/2" plywood base and 1/2" foamed backrest All-welded frame constructed of 1" diameter 16-gauge steel 3/4" circular tube footrest Four leg cluster design has a 22" spread giving them optimum stability Black vinyl upholstery with a royal grey frame Optional casters available OJ905 has an ergonomic self-skinned molded polyurethane foam seat and back, features lumber support, waterfall seat and 4-leg frame for superior comfort and durability. FC670 OJ905 Adjustable Seat Wt. No. Height" Dimensions" lbs. /Each OJ905 25-31 19 x 17 33 409.00 FC670 25-31 19 x 17 33 265.00 FC675 Set of 4 casters - 2 35.70 Adjustable Seat Wt. No. Height" Dimensions" lbs. /Each FC658 22-28 14 19 164.00 FC661 22-28 14 28 228.00 FC665 17-23 14 1/2 x 15 27 250.00 FC673 20-26 14 19 211.00 FC674 25-31 14 22 211.00 FC675 Set of 4 casters - 2 35.70 STEEL BASE SWIVEL STOOLS 5" pneumatic lift of 25" to 30", for easy height adjustment Five legs and an all-welded steel base, gives optimum stability 16-gauge, 1" diameter steel legs Full 360 rotation Colour: Powder coated black Santex Optional casters are available INDUSTRIAL SEATING Features a full 8" of pneumatic lift while seated Exclusive extension tube provides an adjustable height range of 17" to 35" Seats and backs are microcellular self skinning polyurethane foam which inhibits punctures, tears and moisture absorption Large 26" dia. five leg steel base with 2 1/2" diameter glides ensure stability and safety even at the highest levels Large wide angle footrests make it easy to step up into seat OJ973 OJ974 OJ975 FC680 Features 22 back angle and 10 seat tilt adjustment w/double paddle handles. FC681 Features 3" back rest height and 3" back rest depth adjustment. Assembly required. Upholstery Wt. No. Seat Dimensions" lbs. /Each OJ973 Vinyl and foam-padded seat and back 19 x 17 33 247.00 OJ974 Polyurethane seat and back 18 x 17 33 321.00 OJ975 Premium self skinned polyurethane seat and back 19 x 18 35 393.00 OJ976 Optional set of 5 tile casters (includes leg insert socket) 44.60 Dimensions No. of No. Seat" Backrest" Footrests /Each FC680 18 1/2 x 17 15 3/4 x 9 3 646.00 FC681 16 1/4 x 16 1/4 14 1/2 x 9 1 441.00 POLYPROPYLENE SWIVEL STOOLS 360º swivel Constructed of 1" diameter 16-gauge tubular steel base 17" x 16 1/2" sturdy polypropylene seat OA241 comes with a 4-leg base and manual height control from 22" to 28" simply raise or lower the steel rod and lock securely into place ON563/ON564 comes with a 5-leg glass reinforced nylon base and nylon foot ring ON563/ON564 features pneumatic height control from 21" to 28" OA241 4-leg base with glides 295.00 ON563 5-leg base with glides 321.00 ON564 5-leg base with casters 321.00 ON564 1550
STATIONARY & ADJUSTABLE HEIGHT STOOLS Ruggedly built for long lasting service in a warehouse factory or office All-welded frame is a 7/8" dia. steel tube Legs are braced with a 3/4" 18-gauge circular footrest for increased strength and stability 14" diameter embossed steel seat has a 1/8" tempered hardboard inlay FC656 has a 14 1/2" x 15" sq. seat and is reinforced by steel bars All stools have four chrome floor glides that won't damage floors On the adjustable models the telescopic legs have screw locks that adjust on 1" increments Contoured back rest constructed of 19-gauge steel Colour: Royal grey OK067 is a premium shop stool which is chrome-painted A. STATIONARY HEIGHT Seat Wt. No. Height" Dim." lbs. /Each A. FC649 24 14 20 156.00 B. FC647 24 14 12 83.90 B. FC648 30 14 14 83.90 B. C. D. ADJUSTABLE HEIGHT SEATING Seat Wt. No. Height" Dim." lbs. /Each C. FC653 25-33 14 12 99.50 D. FC655 25-33 14 20 172.00 E. FC656 18-26 14 1/2 x 15 18 185.00 E. POLYURETHANE SEAT STOOLS Maximum comfort, durable economical stools with self-skinned polyurethane padded seat Easy to maintain in any environment 14" dia. seats mount to stationary, adjustable or swivel stools of various heights for your convenience Sit/stand seats (OG389, OG390) offer an ergonomic molded polyurethane seat, mounted on a sturdy 4-leg steel base OG385 OG387 OG389 HEAVY-DUTY ERGONOMIC POLYURETHANE SEATING Pneumatic seat height adjustment Self skinned 18" x 17" polyurethane seat and back offers stain and puncture resistance Sturdy 5-leg, glass reinforced, nylon black base Manual vertical back adjustment with built-in lumbar support 3 levers, tilt seat, tilt back Waterfall edge seat design for greater comfort Choice of 2" swivel carpet casters or glides OJ963 OJ967 Adjustable Seat No. Description Height" Dimensions" /Each OG385 Fixed Seat 18-26 13 1/2 x 1 1/2 146.00 OG386 Fixed Seat 25-33 13 1/2 x 1 1/2 146.00 OG387 Swivel Seat 23-30 13 1/2 x 1 1/2 217.00 OG388 Swivel Seat 28-35 13 1/2 x 1 1/2 217.00 OG389 Shaped Sit/Stand Seat 18-26 13 x 9 x 2 170.00 OG390 Shaped Sit/Stand Seat 25-33 13 x 9 x 2 170.00 Adjustable No. Description Height" /Each OJ963 Ergonomic seating with carpet casters 16-22 289.00 OJ966 Ergonomic seating with glides 16-22 289.00 OJ964 Ergonomic seating with carpet casters 20-28 363.00 OJ967 Ergonomic seating with glides 20-28 363.00 OJ965 Ergonomic seating with carpet casters 23-33 372.00 OJ968 Ergonomic seating with glides 23-33 372.00 STENO CHAIRS A heavy-duty industrial chair at an economical price Comfortable 2 1/2" foam-upholstered seat with a full 360 rotation Padded backrest with a floating spring action back hinge Standard black vinyl upholstery A five prong base for increased stability Height adjustment from 17" to 22" Included: Five swivel black nylon, twin wheel casters No. Colour /Each OA276 Black 197.00 DRAFTING STOOLS Designed with a contoured seat and back 3-way back adjustment provides user comfort Seat and back are made with a solid 3/4" plywood frame and fastened together with T-nuts Standard 100% polypropylene black fabric upholstery One piece durable plastic base with nylon footrest Two pneumatic gas levers simplifies height adjustment from 23" to 33" and ergonomic tilt With casters No. Colour /Each OA286 Black 357.00 MID BACK DRAFTING/ TASK CHAIRS Contoured foam seat 20" x 18 1/2" Back dimensions 18" x 19" with integral ergo support Standard 100% polypropylene black fabric upholstery 5-leg glass reinforced nylon base Height adjustment 16"-22" Multi function type seat mechanism T-arms No. Colour /Each ON565 Black 417.00 1551
SEATING ERGONOMIC INDUSTRIAL SHOP SEATING Industrial chairs featuring comfortable and supportive seating that is easy to clean Seats made of a soft molded polyurethane material, backs formed to support the body for greater comfort and less fatigue Pneumatic height adjustment of 15" to 20 1/2" Adjustable back rest 5 prong nylon base with dual wheel hard floor casters Optional chrome foot ring 22" to 32" seat height Glides recommended with foot ring OC816 and OC821 task chairs have adjustable backrest height, depth and angle Optional stool kit model OC822 OC815 SIT/STAND STOOLS Sit/stand stools dramatically reduce fatigue for workers unable to sit down on the job Can be positioned for up close work FC683 heavy gauge triangular glides provide safety, features a built-in footrest, a 14" wide x 13" deep self skinning polyurethane seat mounted to an adjustable spring suspension frame that automatically tilts forward up to 15 while in use Removable seat attaches to frame with a double pin locking system which easily adjusts to 10 positions from 21" to 35" FC685 features a sturdy, tip proof 5-leg base with a padded comfortable "Bicycle style" seat Pneumatic height adjustment from 23 1/2" to 33 1/2" Wt. No. Description lbs. /Each W/CASTERS OC815 Operator's chair 25 336.00 OC816 Task chair 26.5 364.00 NH450 Operator's chair w/stool kit 30 446.00 NH451 Task chair w/stool kit 31.5 482.00 W/GLIDES OC820 Operator's chair 25 350.00 OC821 Task chair 26.5 378.00 NH452 Operator's chair w/stool kit 30 459.00 NH453 Task chair w/stool kit 31.5 487.00 OC816 FC685 FC683 SHOPTECH ERGONOMIC INDUSTRIAL STOOLS Industrial seating that brings ergonomic comfort and productivity to the shop floor, the laboratory or the shipping office Durable, easy-to-clean, molded polyurethane seating is the perfect solution for clean rooms or wipe down applications Overall height of 16" to 21 1/2" with a 19" wide by 14" deep seat Wt. No. Description lbs. /Each OE088 Stool 20 241.00 ESD (ELECTROSTATIC DISSIPATIVE) SHOPTECH SEATING Engineered to control discharge of static electricity by "wicking" static away from the user, sensitive electronic components and volatile chemicals and materials Adjustable pneumatic seat height: 19" - 23 3/4" Seat 19" W x 18" D Backrest 18" W x 18" H Independent, infinite position back and seat angle adjustment with tilt lock control Tilt-tension adjustment Forward seat tilt-lock control Polished aluminum base and chromed gas cylinder Casters are coated with conductive urethane and are suitable for hard floors ON700 Black fabric ESD chair 858.00 ON701 Blue fabric ESD chair 858.00 ON702 Black vinyl ESD chair 858.00 ON703 Black fabric ESD chair with adjustable footring 986.00 ON704 Blue fabric ESD chair with adjustable footring 986.00 ON705 Black vinyl ESD chair with adjustable footring 986.00 ON700 ON703 FC683 Manual adjustment 430.00 FC685 Pneumatic adjustment 231.00 ERGONOMIC SEATING Designed for the industrial work place, food industry, or any application Provides workers with dynamic seating necessary for the maintenance of health and productivity Ergo stool offers a black self-skinned integral molded polyurethane foam seat and back for durability and ease of maintenance Stool features proper lumbar support, swivel and water-fall seat and three pneumatic height adjustments 3 levers, tilt seat, tilt back Adjustable No. Description Height" /Each 2" SWIVEL CARPET CASTERS FC677 No footring 16-22 402.00 FC678 Footring 20-29 472.00 FC679 Footring 23-33 479.00 W/GLIDES OD513 No footring 16-22 402.00 OD514 Footring 20-29 472.00 OD515 Footring 23-33 479.00 OD515 ESD (ELECTROSTATIC DISSIPATIVE) LOW BACK TASK CHAIR STOOLS 10" pneumatic seat height adjustment (20" to 30") with a contoured, black polyurethane seat and back Articulating hinged back provides support Seat depth adjustment enables proper back to front seat support Footing, back upright and cylinder are chromed to provide a clean environment Ideal for electronic labs or defence industries who require furniture designed to direct static electricity away from delicate equipment, components, or chemicals Dimensions: 18" W x 20 1/2" D x 42" H No. OK046 /Each $494.00 FC677 1552
SEATING STAG4 ERGONOMIC BENCHES FLEX ERGONOMIC CHAIRS Ergonomic seat allows users to work in a kneeling position with comfort Reduces pressure sensations felt in the knees, ankles and lumbar region One lever mechanism for seat height adjustment and 20 adjustable slope for kneeling position Padding: Dual-density cushions and closed-cell foam Standard pneumatic lift: 16" to 21" Dimensions of knee rest: 8.5" W x 15.5" L Dimensions of seat: 12.5" W x 12" L Five 3" caster wheels that are adaptable to all surfaces Includes tool tray Weight capacity: 300 lbs. Overall dimensions: 20" L x 28" W x 21" H OG348 Ergonomic chair that reduces pressure sensations felt in the buttocks, wrists and lumbar region Reduces fatigue by limiting muscular effort Five 3'' caster wheels adaptable to all surfaces Dual-density cushions and closed-cell foam padding Backrest: 12" W x 15.5" H Seat: 15" L x 18" W Standard pneumatic lift: 16" to 21" Weight capacity: 300 lbs. Overall dimensions: 19" L x 17" W x 21" H No. OG347 OG348 Description Industrial Grade Welding Grade Material Vinyl Suede OG347 OP275 /Each 635.00 767.00 Colour Black/Grey Black No. OP274 OP275 Description Industrial Grade Welding Grade Material Vinyl Suede TF180 ERGONOMIC STOOLS SF180 ERGONOMIC STOOLS Ergonomic stool with a larger seat that improves workers' comfort Reduces lumbar muscular effort Padding: Dual-density cushions and closed-cell foam Standard pneumatic lift: 17.5" to 25.5" Dimensions of backrest: 15.5" W x 14" H Dimensions of seat: 18.5" W x 16" L Five 3" caster wheels that are adaptable to all surfaces Weight capacity: 300 lbs. Overall dimensions: 28" L x 28" W x 33" H Ergonomic stool with a larger seat that improves workers' comfort Reduces lumbar muscular effort Five 3'' caster wheels adaptable to all surfaces Dual-density cushions and closed-cell foam padding Backrest: 15.5" W x 14" H Seat: 16" L x 18.5" W Standard pneumatic lift: 16'' to 21'' Weight capacity: 300 lbs. Overall dimensions: 25" L x 25" W x 36" H OP241 OP242 No. OP241 OP242 Description Industrial Grade Welding Grade Material Vinyl Suede 1546-1586_Eng.indd 1553 OP278 /Each 719.00 838.00 Colour Black/Grey Black No. OP278 OP279 Description Industrial Grade Welding Grade Material Vinyl Suede Colour Black/Grey Black /Each 637.00 696.00 TA180 ERGONOMIC STOOLS Ergonomic stool that improves user comfort and reduces foot and leg pain due to prolonged standing Ideal for users that need freedom of movement Base is equipped with non-skid pads Dual-density cushions and closed-cell foam padding Seat: 10" L x 12" W Standard pneumatic lift: 14.5'' to 18'' Weight capacity: 300 lbs. Overall dimensions: 16" L x 22" W x 27" H OP280 Ergonomic chair that provides excellent working posture and reduces muscular effort Ideal for multiple shifts and 24-hour use Five 3" caster wheels adaptable to all surfaces Dual-density cushions and closed-cell foam padding Backrest: 17" W x 21.5" H Seat: 18.5" L x 18" W Standard pneumatic lift: 14.5'' to 18'' Weight capacity: 300 lbs. Overall dimensions: 28" L x 28" W x 40.5" H Description Industrial Grade Welding Grade /Each 551.00 628.00 Colour Black/Grey Black OP279 SYNERGO II ERGONOMIC CHAIRS No. OP280 OP281 OP274 OP276 OP277 OP281 Material Vinyl Suede Colour Black/Grey Black /Each 974.00 1166.00 No. OP276 OP277 Description Industrial Grade Welding Grade Material Vinyl Suede Colour Black/Grey Black /Each 449.00 467.00 1553 16-07-22 3:27 PM
SEATING FLEX 2 ERGONOMIC CHAIRS Ergonomic chair that reduces pressure sensations felt in the buttocks and lumbar region Allows users to quickly adjust working positionon Backrest is adjustable at an angle of 15 to 85 to the ground Padding: Dual-density cushions and closed-cell ell foam Upholstery: Easy to maintain black/grey antibacterial and antistatic vinyl Four 3" caster wheels that are adaptable to all surfaces Heavy-duty steel base Dimensions of backrest: 17" W x 28" H Dimensions of seat: 18" W x 18" L Dimensions of base: 17" W x 33" L Overall dimensions: 36" L x 19" W x 34" H Weight capacity: 300 lbs. No. Description Material Colour /Each OP427 Industrial Grade Vinyl Black/Grey 1035.00 OP428 Welding Grade Suede Black 1161.00 SPECIALTY STOOLS Designed specifically for laboratories and medical offices Available with 14" diameter, 3" high vinyl or fabric covered seat Pneumatic mechanism to adjust the height Full foot ring is standard on stools except for models OC785, OC791 and OC788 Choice of casters or glides available OC785 OC790 POLYETHYLENE FOLDING CHAIRS Dimensions: 15 1/2" L x 16 1/2" W x 33 1/2" H Durable contoured back and seat for all day comfort Steel framing and folding legs for extra strength Easy to clean Capacity : 350 lbs. No. ON602 /Each $49.95 HANGING CHAIR CADDIES Space-saving solution, ideal in applications where space is limited Holds up to 84 chairs Portable, easy mobility with 4" swivel casters Overall dimensions: 64 1/2" L x 33 1/2" W x 70 1/4" H No. OK072 /Each $571.00 No. Adjustable Wt. Vinyl Fabric Height" lbs. /Each CASTERS OC785 OC791 16-22 14 136.00 OC786* OC792* 20-28 18 195.00 OC787* OC793* 23-33 20 203.00 GLIDES OC788-16 - 22 14 136.00 OC789* - 20-28 18 195.00 OC790* OC796* 23-33 20 203.00 OC819 Optional Foot Ring 57.60 *Full foot ring included PNEUMATIC SWIVEL STOOLS 5" gas lift Height adjustable from 15" to 20 1/2" Black select vinyl Weight: 10 lbs. No. OD846 /Each $154.00 10" gas lift Height adjustable from 22" to 32" Options SKR18 footring Weight: 12 lbs. No. OD847 /Each $190.00 OD847 RUBBER WHEEL HAND TRUCKS Constructed of 1", 16-gauge steel tubing Nose plate 7-gauge steel Overall width: 19 1/2" Wheel dimensions: 8" x 2" Powder-coated Overall Nose Plate Dimensions Capacity Wt. No. Description Height W" x D" lbs. lbs. /Each MK729 Dual Handle 48 14 x 8 1/2 600 24 75.85 ACTIV A-20 GUEST CHAIRS Contoured mesh backrest High density, high resiliency foam cushion seat Waterfall seat edge design 4-legged black metal frame with non marking glides Stacks 4 high Seat: 18.5" W x 19.5" D Backrest: 16"H x 17.5" W Colour: Black Material: Mesh Fabric Weight capacity: 250 lbs. Overall dimensions: 19.5" L x 18.75" W x 16" H Greenguard TM certified No. OP259 /Each $227.00 1554 ATTACHMENTS Constructed of 1", 14-gauge steel tubing Allows extra versatility to adapt to changing material handling requirements without the extra cost Easy to install Designed to fit most hand trucks with a 14" frame width Wt. No. Description lbs. /Each MA378 Chair Mover Attachment 15 160.00
SEATING MAXX STAXX TM - STACKABLE CHAIRS Ideal for lunch rooms, training rooms, seminars or as guest seating Sturdy, elliptical steel frame Durable nylon armrests Non-marking nylon floor glides Polypropylene seat and backrest Replaceable seat and backrest components Polypropylene seat bottom shell (protects chair surfaces when stacking) Back is 13 1/2" high and 16 1/2" wide Seat 17" wide x 15 1/2" deep OK391 ARMLESS STACKING CHAIRS Durable polypropylene shell with a pebbled finish on 3/4" chromed frame Stacks up to 8 high for compact storage Ultra light and stain resistant For use in cafeteria, warehouse or community halls OK032 No. Black /Each OK032 88.20 OK391 MaxX armless 121.00 OK392 MaxX armchair 131.00 COMET CONTEMPORARY STACKING/SIDE CHAIRS Ideal for waiting rooms, reception, banquet halls or meeting rooms Durable black finish on tubular steel frame Wall saver frame prevents marking Can be stacked five high ON724 OK392 ON723 STACKING CHAIRS A117 Standard black with grey vein powder coated frame 18 gauge 22" x 22" steel frame Additional support bar under the seat Stacks 10 high Seat: 17.75" W x 16.5" D Backrest: 37" H x 17" W Weight capacity: 250 lbs. Overall dimensions: 18" L x 17.75" W x 16" H OP260 Black, Vinyl 79.90 OP261 Black, Fabric 79.90 OP260 Dimensions No. Description W" x D" x H" /Each ON723 Stacking chair with arms 23 x 23 x 32 1/2 163.00 ON724 Stacking chair no arms 19 x 23 x 32 1/2 128.00 IBEX GUEST CHAIRS Comes standard with 4 dual wheel casters Comfortable air-flow mesh back Seat height: 17.5" Weight capacity: 300 lbs. Overall dimensions: 24" L x 20" W x 34.5" H OP305 Armless, Black, Fabric 256.00 OP306 Armless, Charcoal, Fabric 256.00 OP307 Armless, Black, Vinyl 256.00 OP308 Armless, Charcoal, Vinyl 256.00 OP309 Black, Fabric 272.00 OP310 Charcoal, Fabric 272.00 OP311 Black, Vinyl 272.00 OP312 Charcoal, Vinyl 272.00 MINTO STACKING CHAIRS Ergonomic features include waterfall seats and contoured cushions Stacks 5 high Seat height: 18" Frame: Round tube steel Armcaps: Polypropylene Weight capacity: 300 lbs. Overall dimensions: 22.5" L x 23" W x 32" H OP305 OP317 OP311 POLYPROPYLENE Weighs only seven pounds and is surprisingly strong 7/8" tubular steel frame is in the shape of an X under the seat giving rigidity and strength to the unit Moulded polypropylene seat and back with a texture finish Glides are insert type and will not mark floors Will stack with all plywood stacking chairs 18" seat height OD919 Frame Back and Seat No. Colour Colour /Each OD919 Beige Navy 52.30 OD920 Beige Grey 52.30 HORIZON CHAIRS Incredibly strong and durable thermoplastic shell which assures correct posture and provides maximum comfort for sustained periods of sitting Arched back with sculptured cut-out provides excellent ventilation Heavy-duty welded, unitized chassis designed to enable stacking yet avoids protruding legs Legs made of 16-gauge tubular steel Heavy 14-gauge channel cross braces provide anchor points for the shell Frame is black Seat height: 18" OD920 OP317 Black, Fabric 118.00 OP318 Charcoal, Fabric 118.00 OP319 Armless, Black, Fabric 93.90 OP320 Armless, Charcoal, Fabric 93.90 OP320 No. Colour /Each OD925 Blue 59.95 OD929 Grey 59.95 OD933 Black 59.95 OD937 Green 59.95 1555
TABLES ADJUSTABLE STAND-UP WORKSTATIONS Mobile and adjustable for comfort and productivity Effortless crank adjustment from sitting to standing Promotes better posture, reduced back and neck pain, a thinner waist line and other health benefits Height range: 29"- 42.75" Table Finish: Walnut Base Finish: Silver Powder Coat Caster Type: Four 3" furniture grade, two with locking brakes Includes all hardware and tools required for assembly FOLI TM HEIGHT ADJUSTABLE TABLES Electric height adjustment allows for easy movement from sitting to standing and back throughout the day Single motor hex rod drive system Shadow power draw of 0.5 watts All table frames are easy to assemble with few parts Height Range: 27.69" to 46.2" Capacity: 220 lbs. Base Finish: Silver Powder Coat OP282 Overall Dimensions No. H" x W" x D" /Each OP282 42-3/4 x 47-1/4 x 29-1/2 768.00 OP283 42-3/4 x 59 x 29-1/2 842.00 Overall Dimensions No. Colour H" x W" x D" /Each OP284 Brown 46-1/5 x 60 x 30 965.00 CAFETERIA TABLES Chrome pedestal base Tiger walnut top Leveling glides ON726 IONIC DESK TABLES Freestanding rectangular desk with 2 legs and stability panel Made of thermally fused laminate surfaces with 3mm PVC matching edge 2" square posts with levelers Designed for quick and easy assembly Tested to meet ANSI & BIFMA desking standards Overall Height: 29" Overall Width: 72" Overall Depth: 30" OP327 ON728 Winter Cherry ON725 Round Cafeteria Table, 30" Dia. x 29 1/2" H 231.00 ON726 Round Cafeteria Table, 36" Dia. x 29 1/2" H 287.00 ON727 Square Cafeteria Table, 30" W x 30" D x 29 1/2" H 231.00 ON728 Square Cafeteria Table, 36" W x 36" D x 29 1/2" H 287.00 Overall Dimensions No. Colour H" x W" x D" /Each OP327 Dark Espresso 29 x 72 x 30 344.00 OP328 Winter Cherry 29 x 72 x 30 344.00 OP329 Dark Espresso 29 x 60 x 30 326.00 OP330 Winter Cherry 29 x 60 x 30 326.00 For sanitizers & disinfectants, see page 318 1556
TABLES CAFETERIA TABLES 1 1/8" thermally fused walnut finish laminate Self-edged top with a black metal skirt Chromed legs have adjustable feet glides Ideal for cafeteria or work table OK050 FOLDING TABLES 5/8" thick tops Durable walnut colour plastic laminate finish Folding legs and perimeter metal frame constructed of 16-gauge brown enamel steel Table height: 29" OA304 Top Size No. L" x W" /Each OK050 60 x 30 267.00 OK051 72 x 30 322.00 OK052 72 x 36 330.00 OK053 84 x 36 444.00 OK054 96 x 48 483.00 RECTANGULAR FOLDING TABLE 5/8" particleboard core with thermally fused laminate top Heavy-duty metal legs with safety locking mechanism Features brown vinyl T-molding, metal skirts, round brown legs and plastic molded corner pieces Manufacturer Colour: Walnut Top Size No. L" x W" /Each OA948 72 x 36 326.00 OA946 96 x 36 392.00 OA304 60" Diameter 461.00 EDGE STACKING CADDIES For rectangular or round tables Ideal for tables of all widths especially wider than 30" that must fit through a narrow doorway 14-gauge steel tubing with a black finish Shipping weight: 65 lbs. OA948 Dimensions Capacity No. L" x W" x H" lbs. /Each OJ669 60 x 30 x 29 270 138.00 OJ671 72 x 30 x 29 305 144.00 OP456 96 x 30 x 29 370 165.00 FLAT STACKING CADDIES Speeds up set-up and storage of all sizes and types of folding tables 4" diameter swivel casters mounted to a heavy gauge welded frame Side rails are covered with neoprene rubber to protect tables 74" L x 31 1/4" W x 36 1/4" H. Wt.: 67 lbs. Stacks 10-12 24" / 30" / 36" W x 60" / 72" L tables or 20-24 18" W x 72" L tables No. OG342 /Each $633.00 97 1/2" L x 31 1/4" W x 36 1/4" H. Wt.: 78 lbs. Stacks 10-12 24" / 30" / 36" W x 96" L tables or 20-24 18" W x 96" L tables No. OG341 /Each $672.00 OG342 OG341 Dimensions Table No. Used with L" x W" x H" Capacity /Each OG344 Rectangular 49 x 31 1/4 x 32 1/4 10 999.00 OG340 Round 49 x 31 1/4 x 41 1/4 8 822.00 OG344 POLYPROPYLENE ROUND FOLDING TABLES Multi purpose Lightweight, durable and portable Easy to clean Folding legs automatically lock by use of gravity activated mechanism when opened High strength 19-gauge, 1 1/8" diameter steel tubular legs have welded crossbars for durability and stability Chairs (ON602) not included Dimensions Wt No. Description L" W" H" lbs. /Each OK137 Round 48 x 48 x 29 31 153.00 OK138 Round 60 x 60 x 29 47 246.00 POLYETHYLENE FOLDING TABLES Blow molded polypropylene top Lightweight with folding legs for easy storage 29" fixed table height with locking steel legs Easy to clean Folding legs automatically lock by use of gravity activated mechanism when opened Capacity: 500 lbs. POLYETHYLENE FOLD-IN-HALF TABLES Blow-molded polypropylene top Lightweight with ability to fold the table in half to 3 1/2" thick for easy storage 29" fixed table height with locking steel legs Folding legs automatically lock by use of gravity activated mechanism when opened Easy to clean Dimensions: 72" L x 30" W x 29" H Capacity: 350 lbs. No. ON601 /Each $121.00 Dimensions Wt. No. L" x W" x H" lbs. /Each ON598 48 x 24 x 29 22 85.75 ON599 72 x 30 x 29 35 121.00 ON600 96 x 30 x 29 50 184.00 1557
COMPUTER SUPPLIES KEYBOARD AND MOUSE PLACEMENT Place the keyboard and mouse directly in front of and close to you. Adjust the keyboard as low as possible, but with adequate leg room. Adjust the slope of the keyboard so that your wrists are straight. They should not extend downward or upward while typing. Type with your hands and wrists floating above the keyboard, using the wrist pads only to rest your wrists while typing. Studies have shown that office workers tend to relax their arms against the wrist rest while using the computer. It is important to avoid doing so, as using the wrist rests to support the arms often isolates movements from your wrist down to your fingers, which can cause problems. Avoid resting your wrist on sharp objects (e.g., desk edge). HEIGHT ADJUSTABLE MONITOR ARMS Allow users to position one screen to enhance visual comfort 9" vertical height adjustment on 12" post Maximum Screen Size: 21" Extension Type: Dual Monitor Capacity: 20 lbs. Additional horizontal and vertical height adjustability Colour: Silver Includes desk clamp, grommet and through-hole mounts OP285 OP286 HEAVY-DUTY KEYBOARD DRAWERS HEAVY-DUTY SLIDE OUT TRAYS Adjustable mounting brackets Smooth action ball bearing slides Available with or without extendible mouse platform Tray size: 11" x 23" w/o mouse platform OB536 Keyboard Tray (Heavy-Duty) 101.00 OB537 Keyboard Tray (Heavy-Duty) w/mouse platform 177.00 Monitor Number of No. Arms Screens /Each OP285 Single Screen 1 266.00 OP286 Dual Screen 2 484.00 KL-28S ECONOMY KEYBOARD DRAWERS Laminate with 3-mil PVC edging (28" x 11.75") Fixed height, 16" ball bearing slides Keyboard and mouse on same level Mouse-friendly surface Suitable for right or left handed users Low profile platform maximizes knee clearance Meets or exceeds BIFMA standards Optional 27" gel foam wrist support ON572 OK383 KEYBOARD DRAWERS 26" tray with integrated mouse area Fits all keyboard sizes 3 position height adjustable Includes a full-length gel wrist pad Dimensions: 26" x 13 5/8" x 2 3/4" No. OTG387 /Each $107.00 ECOBOARD TM ARTICULATING KEYBOARD TRAY Lift n' Lock TM "leverless" height adjustment 8.88" height adjustment range of 2.38" above and 6.5" below work surface Angle adjustment +10 to -20 Cable management system 21" smooth glide storage track Removeable 25.5" GelFoam palm/wrist support 360 swivel mount 45% recycled content by weight 99.97% recyclable Length: 26" Depth: 11-1/2" Includes Mouse Platform: Yes OK383 Economy Keyboard Drawer 73.70 ON572 Gel-Filled Wrist Support 54.20 OP263 EB-01 EcoBoard 01 325.00 HEAVY-DUTY ARTICULATING KEYBOARD TRAYS W/MOUSE PLATFORM Fully articulating swing arm is height/depth adjustable Swivel mount with tilt tray feature Includes anti-skid surface Keyboard stores under work surface Tray size: 11 1/2" x 21 1/2" w/mouse platform No. OB539 /Each $270.00 1558 JIVE ARTICULATING KEYBOARD SYSTEMS Lift n' lock "leverless" height adjustment Height adjustment range of 2.5" above and 6" below work-surface Innovative dial tilt makes angle adjustment quick and easy - angle adjustment +10 to -15 Tilt and height indicator displays present keyboard position 26" steel platform Mouse and keyboard on the same level 26" Gelfoam TM palm/wrist support Mouse/cord management rails (right or left) Anti-skid / anti-static pads keep keyboard in place Mouse friendly surface 21" smooth glide storage track 360 swivel mount Suitable for right or left handed users Low profile mechanism and platform maximizes knee clearance Meets or exceeds BIFMA and ADA standards No. ON567 /Each $323.00
COMPUTER SUPPLIES ALL-WELDED DESKTOP CABINETS Locking slide-in pocket doors with inner compartments for storage of files or manuals Pull out keyboard shelf Sliding tray may be used for mouse pad or as a writing surface Vented back for air circulation Finish baked enamel blue and grey Ships fully assembled No. OC533 OPEN PEDESTAL STANDS 32" high, designed to support the desk top unit for stand up operation Blue baked enamel finish Includes: Convenient storage shelf and adjustable leg levellers for uneven work surfaces Shipped knocked down No. OC534 ENCLOSED PEDESTAL STANDS/ PRINTER STANDS Roll in/roll out hideaway printer stand which locks inside the enclosure when not in use Printer stand has two adjustable, one bottom 28" W x 25" D shelves for printers or peripherals and paper 30" high enclosure may be oriented for left or right hand access Blue and grey baked enamel finish Shipped knocked down No. OC535 Desktop cabinet with open pedestal stand Equipment Not Included OC533 OC534 OC535 Desktop cabinet with enclosed stand/ printer stand Dimensions Wt. No. Description W" x D" x H" lbs. /Each OC533 Desktop upper computer cabinet only 30 x 27 3/4 x 30 122 915.00 OC534 Computer cabinet open pedestal base only 30 x 27 3/4 x 32 66 499.00 OC535 Computer cabinet enclosed base w/printer stand 30 x 27 3/4 x 33 142 1126.00 MOBILE COMPUTER CABINETS All-steel welded construction Top monitor compartment is 22 1/2" W x 23" D x 18 3/4" H with a slide-out keyboard shelf Locks independently of bottom section which includes 2 adjustable shelves 5" polyolefin casters (2 rigid, 2 swivel w/brake) Total dimensions: 26" W x 24" D x 64" H Wt.: 149 lbs. Finish durable baked enamel blue and light grey Includes: Vented back for air circulation and a 6-outlet power strip with built-in surge suppression Shipped fully assembled Equipment not included No. OC532 /Each $1585.00 MOBILE COMPUTER CABINETS All-steel construction Slide-out keyboard tray Lower lockable cabinet is 24 5/8" W x 22 7/8" D x 22 5/8" H Two-position shelf can be located for desk top style or up to 18" H tower style CPU's Fixed shelf is 24 5/8" W x 22 7/8" D x 11 1/2" H and provides ample room for any sheet fed style or continuous form style printer Rear cabinet access holes for paper feed, cables and ventilation fan (not included) 5" polyolefin casters (2 rigid, 2 swivel w/brake) Total dimensions: 27" W x 24" D x 49 1/4" H Weight: 125 lbs. Colour: Blue Shipped knocked down, assembly required with simple hand tools Equipment not included No. OC839 /Each $795.00 MOBILE SECURITY COMPUTER CABINETS Secure locking cabinet with resistant acrylic see-thru window for LCD monitor Slide out locking keyboard is 19 3/4" W x 17 1/2" D x 4" H Lower compartment is 20 1/2" W x 21" D x 23 1/2" H and has a locking front and rear access doors Two convenient side wing shelves for additional work space, fold down when not required 5" heavy-duty casters (2 rigid, 2 swivel w/brake) Overall dimensions: 24 1/2" W x 22 1/2" D x 62 1/4" H Powder coated finish provides a durable finish Equipment not included No. Colour /Each OG880 Blue 875.00 OG881 Putty 885.00 OG882 Light Grey 885.00 OG883 Black 885.00 COMPUTER CABINETS A unique two-piece heavy-duty all-welded steel construction that provides space efficient security for your valuable electronic equipment Locking upper compartment with plexiglass window provides viewable access for most 20" monitors Lower compartment features one fixed bottom and one adjustable shelf Top level can be bolted onto a desk (bolts not included) Louvers in the rear provide equipment ventilation Heavy-duty all-welded steel top and bottom sections bolt together for easy assembly Includes: 5" casters (2 rigid, 2 swivel w/brake) Equipment not included OE825 Dimensions No. Description W" x D" x H" Colour /Each OE824 Complete computer enclosure w/casters 24 1/2 x 22 1/2 x 59 1/2 Light grey 865.00 OE825 Complete computer enclosure w/casters 24 1/2 x 22 1/2 x 59 1/2 Putty 865.00 OE826 Top level (internal) 20 3/4 x 21 3/4 x 19 1/4 Light grey 405.00 OE827 Top level (internal) 20 3/4 x 21 3/4 x 19 1/4 Putty 399.00 1559
COMPUTER SUPPLIES COMPUTER CABINETS FOR HARSH ENVIRONMENTS Heavy-duty all-welded construction with forklift channels for easy movement Built-in fan with guard and filter keeps equipment cool and provides positive air pressure in the enclosure to keep out dust Locking upper compartments with plexi-glass window provides viewable access to most 20" monitors Locking Pull-out drawer facilitates ergonomic operation of keyboard and mouse while top and bottom compartments are locked Roll-out printer shelf in lower section provide full access and is height adjustable for any style equipment Adjustable bottom shelf provides space for desktop or tower style CPUs Rear access panel for easy cable management Caster base includes 5" polypropylene casters (two-rigid two-swivel with brake) Tough powder coat finish Includes 6-outlet UL listed and CSA approved power strip with built in surge protection Optional caster base available for even greater mobility ON574 Mfg. Dimensions Wt. No. No. Description W" D" H" lbs. Colour /Each ON574 CSC6850 Computer Cabinet 28 1/2 28 1/2 60 255 Blue 2165.00 ON575 CSC6852 Optional Caster Base - - 38 - Blue 199.00 MUV TM STAND-UP WORKSTATIONS 45" high fixed workstation Decoratively molded side panels hides cables Keyboard shelf extends 9 3/4" and retracts under the work surface when not in use Keyboard shelf dimensions: 24 3/4" W x 13 1/2" D Weight capacity: 100 lbs. (desk top), 25 lbs. (keyboard tray) Powder coat steel frame, melamine laminate compressed wood shelves Dual wheel carpet casters with two locking Work surface dimensions: 29 1/2" W x 19 3/4" D x 3/4" H Finished product dimensions: 29 1/2" W x 22" D x 45" H ON729 Stand-Up Workstation, Cherry 333.00 ON730 Stand-Up Workstation, Grey 333.00 ON731 Stand-Up Workstation, Medium Oak 333.00 MUV TM STAND-UP ADJUSTABLE HEIGHT WORKSTATIONS Adjustable height: 35" to 49" H Decoratively molded side panels hides cables Keyboard shelf extends 9 3/4" and retracts under the work surface when not in use Keyboard shelf dimensions: 22 3/4" W x 13 1/2" D Weight capacity: 100 lbs. (desk top), 25 lbs. (keyboard tray) Powder coat steel frame, melamine laminate compressed wood shelves Dual wheel carpet casters with two locking Work surface dimensions: 29 1/2" W x 19 3/4" D x 3/4" H Finished product dimensions: 29 1/2" W x 22" D x 35" to 49" H PLASTIC AV HEIGHT-ADJUSTABLE CARTS Push and position media equipment with ease Heavy-gauge plastic resists dents and scratches Holds up to a 20" monitor and has three outlet UL approved mini-surge protector with power switch Mobile on 4 swivel casters (2 locking) Capacity: top shelf 50 lbs., middle shelf 15 lbs., bottom shelf 15 lbs. Dimensions: 27 3/4" W x 18 1/2" D x 42" H Equipment not included No. OK004 /Each $243.00 DURACART TM Lightweight plastic multimedia cart is excellent for use with monitors and multimedia projector system Includes: UL listed 3-outlet electric assembly, casters (2 locking), 15' cord and a cord wrap management system Guaranteed against stains, scratches, dents and rust Equipment not included No. OK085 /Each $312.00 STEEL TABLE & CABINET CARTS Excellent for monitors and projectors All-steel construction, die-pressed shelves and arc welding for maximum strength and durability Top shelf can adjust to heights of 26", 30", 38" and 42" Includes: UL listed 3-outlet electric assembly with 25' cord 4" casters with 2 locking Equipment not included No. OK086 /Each $336.00 No. OK087 Includes: Lower locking compartment for secure storage /Each $560.00 For our complete line of extension cords & power bars, see pages 1508 & 1535 to 1537 ON732 Adjustable Height Workstation, Cherry 495.00 ON733 Adjustable Height Workstation, Grey 495.00 ON734 Adjustable Height Workstation, Medium Oak 495.00 1560
FOLI TM HEIGHT ADJUSTABLE TABLES Electric height adjustment allows for easy movement from sitting to standing and back throughout the day Single motor hex rod drive system Shadow power draw of 0.5 watts All table frames are easy to assemble with few parts Height Range: 27.69" to 46.2" Capacity: 220 lbs. Base Finish: Silver Powder Coat COMPUTER SUPPLIES ADJUSTABLE STAND-UP WORKSTATIONS Mobile and adjustable for comfort and productivity Effortless crank adjustment from sitting to standing Promotes better posture, reduced back and neck pain, a thinner waist line and other health benefits Height Range: 29"- 42.75" Table Finish: Walnut Base Finish: Silver Powder Coat Caster Type: 4-3" furniture grade, two with locking brakes Includes all hardware and tools required for assembly Overall Dimensions No W" x D" x H" Colour /Each OP284 60 x 30 x 46 1/5 Brown 965.00 VISUAL CABINETS Keep a close eye on valuable inventory Plexiglass door panels resist breakage and will not shatter 22-gauge shelves, adjustable on 2" centres 20-gauge steel doors 3-point locking mechanism with die-cast locking handle (includes two keys) Capacity per shelf: 150 lbs. Shipped knocked down No Dimensions No. of Tan Grey W" x D" x H" Shelves /Each MI629* FH645* 30 x 12 x 26 2 684.00 MI630 FH646 36 x 18 x 42 2 778.00 MI631 FH647 36 x 24 x 78 4 1303.00 *Wall unit MOBILE PRESENTATION WORKSTATION Adjustable height computer workstation from 39" to 45" is designed for laptop or desktop computers The workstation is compact and mobile for easy set up and transport 3" casters, two with locking brakes Colour: Charcoal Gray Dimensions 24" W x 31" D x 45" H No. ON610 /Each $269.00 Overall Dimensions No W" x D" x H" Colour /Each OP282 47 1/4 x 29 1/2 x 42 3/4 Walnut 768.00 OP283 59 x 29 1/2 x 42 3/4 Walnut 842.00 48" EXTRA-WIDE ALL-WELDED CABINETS This cabinet offers plenty of storage space for large and small supplies All-welded 20-gauge steel construction Overall Dimensions: 48" W x 24" D x 72" H Capacity per shelf: 175 lbs. evenly distributed Includes four adjustable shelves and locking handle Fully assembled Wt. No. Colour lbs. /Each FJ860 Dark Grey 230 962.00 FJ869 Beige 230 962.00 PRESENTATION CART Three shelf cart with front pull-out shelf Includes 3 outlet surge suppressing electric assembly with 15' cord and built in cord wrap 4" casters, two with locking brake Polyethylene shelves will not scratch, dent, rust or stain Colour: Black Dimensions: 24" W x 18" D x 42" H No. ON609 /Each $274.00 1561
SAFES DATA PROTECTION MEDIA SAFES Protects valuable records from vandalism, fire, dust and magnetism Paper records will withstands temperatures up to 177 C (350 F) Computer media records will withstand temperatures up to 52 C (125 F) and humidity up to 80% Rating: UL Class 350-1 hour for safe, and data/media insert was furnace tested by manufacturer to 125 0F (52 0C) for 1 hour Pull out media drawers and stationary shelves accessories are also available OE770 must be inserted into a U.L. Class 350, 1-hour filing cabinet Colour: Beige F.O.B. Victoriaville, Quebec. HIGH SECURITY COMPOSITE SAFES UL TL-30 certified Built to exceed all industry standards Full composite construction features 1 1/2" diameter steel bolts Heavy plate steel frame High quality adjustable hinges Class 350 F, 1-hour fire label Colour: Charcoal F.O.B. Victoriaville, Quebec. Outside Dimensions Wt. No. H" x W" x D" lbs. /Each OE769 29 x 21 1/2 x 21 1/2 315 1474.00 OE768 39 x 26 1/2 x 26 1/2 567 2324.00 OE770 9 5/8 x 15 x 21 1/4 40 241.00 Outside Dimensions Wt. No. H" x W" x D" lbs. /Each OE771 27 x 23 x 25 3/4 925 3138.00 OE773 43 x 27 x 29 1/4 1640 3935.00 GRAND PRIX LINE UL LISTED SAFES Keep documents intact for one full hour despite exterior temperatures as high as 927 C (1700 F). F.O.B. Victoriaville, Quebec. Features include: Heavy gauge satin coat steel with anti-rust treatment Insulated with moisture pockets between the walls Heavy-duty hinges 6" continuous fixed locking bar Key changing combination lock Adjustable shelves Heavy-duty caster base LEDGER SAFE Full size ledger safe ensures document security despite ambient temperatures reaching 1000 C (1850 F) for a full two hours. F.O.B. Victoriaville, Quebec. Features include: Three heavy-duty hinges Three adjustable shelves Key changing combination lock Caster base No. Outside Dimensions Inside Dimensions Cap. Wt. Black Beige H" x W" x D" H" x W" x D" Cu. in. Shelves lbs. /Each UL LISTED 177 C (350 F) FOR 1 HOUR OC750 OA690 24 x 18 1/2 x 18 1/2 17 1/2 x 15 1/2 x 13 1/2 3662 1 175 1697.00 OC751 OA691 29 x 21 1/2 x 21 1/2 22 3/8 x 18 1/2 x 16 3/8 6778 1 250 954.00 OC752 OA692 39 x 26 1/2 x 26 1/2 32 1/4 x 23 1/2 x 21 3/8 16 200 2 455 1116.00 OC753 OA686 50 x 26 1/2 x 26 1/2 42 1/4 x 23 1/2 x 21 3/8 21 222 3 575 1328.00 LEDGER CABINET MANUFACTURER CERTIFIED 177 C (350 F) FOR 2 HOURS (CLASS B) OC749 OC736 60 x 26 1/2 x 26 1/2 50 x 20 x 20 20 000 3 910 2416.00 FIRE RESISTANT FILING CABINETS Filing cabinets are ULC listed. Cabinets maintain interior temperatures below 177 C (350 F) in ambient temperatures reaching 927 C (1700 F) for one hour. The char point of paper is only 230 C (420 F). Valuable documents, mailing lists and records are kept safe from fire and theft. Each drawer is independently insulated to protect documents even when another drawer is left open. Key operated plunger lock secures all drawers. F.O.B. Victoriaville, Quebec. Horizontal Vertical No. Outside Dimensions Inside Dimensions Wt. Black Beige H" x W" x D" H" x W" x D" Drawers lbs. /Each VERTICAL FILING CABINETS OC737 OC740 54 x 19 3/4 x 31 10 1/2 x 15 x 26 4 640 2604.00 OC738 OC741 41 x 19 3/4 x 31 10 1/2 x 15 x 26 3 490 2351.00 OC739 OC742 28 x 19 3/4 x 31 10 1/2 x 15 x 26 2 360 1608.00 HORIZONTAL FILING CABINETS OC743 OC746 55 x 38 3/4 x 23 1/2 10 1/2 x 32 1/2 x 15 1/2 4 1020 3654.00 OC744 OC747 42 x 38 3/4 x 23 1/2 10 1/2 x 32 1/2 x 15 1/2 3 720 3147.00 OC745 OC748 29 x 38 3/4 x 23 1/2 10 1/2 x 32 1/2 x 15 1/2 2 505 2601.00 1562
FILING & SYSTEMS WELDED CABINETS Suitable for office, plant, school or institutional storage needs Fully adjustable shelves, recessed handle, cylinder lock, and coat rods (wardrobe and combination types) Choose from Hi-Boy, Lo-Boy, wardrobe, and combination cabinets Lo-Boy comes with two shelves Capacity: 150 lbs. evenly distributed Hi-Boy Type Wardrobe Type Combination Type Lo-Boy Type No. Dimensions Wt. Charcoal Beige Black Description W" x D" x H" lbs. /Each FJ856 FJ864 FJ859 Hi-Boy 36 x 18 x 72 140 481.00 FJ867 FJ871 FJ865 Wardrobe 36 x 18 x 72 182 450.00 FJ861 FJ858 FJ862 Combination 36 x 18 x 72 121 537.00 FJ863 FJ870 FJ868 Lo-Boy 36 x 18 x 72 144 347.00 FJ873 FJ875 FJ876 Additional Shelf 36 x 18 x 40 90 31.40 FJ881 FJ880 FJ879 Additional Deep Shelf 36 x 16 x 1 6.5 67.10 VERTICAL FILES W/RECESSED DRAWER HANDLES High side walls accommodate hanging files and eliminate the need for hanging file frames Removable cam lock included Full cradle suspension Easy-to-grab recessed pulls on drawers Fully adjustable and removable follower block is standard in every drawer Legal size: 18" W x 26 9/18" D LATERAL FILLING CABINET All-welded, heavy-duty cold-rolled steel construction Durable baked enamel paint (40-45% lust) One lock for all drawers Two hanging bars per drawer Interlocking system and levellers OP214 OP218 OP222 No. No of Black Grey Beige Drawers Height" /Each OTE611 OTE612 OTE613 2 29 209.00 OTE618 OTE619 OTE620 3 40 315.00 OTE624 OTE625 OTE626 4 52 351.00 No. No. of Overall Dimensions Beige Light Grey Black Shelves W" x D" x H" /Each OP214 OP215 OP213 2 36 x 18 x 27 7/8 509.00 OP217 OP218 OP216 3 36 x 18 x 40 1/16 662.00 OP220 OP221 OP219 4 36 x 18 x 53 3/8 856.00 OP223 OP224 OP222 5 36 x 18 x 65 1/2 1050.00 4-IN-1 LATERAL FILE CENTRES Fully assembled, all-welded -piece design, no assembly required Combines lockable storage and filing in one compact unit Lateral file drawer features 100% drawer extension on progressive telescoping ball-bearing slides providing smooth trouble-free operation Single lock system secures all drawers with one key (two keys included) Door locks separately (two keys included) Extra deep lateral file drawer accommodates letter or legal size files 30" W x 18" D x 26" H Available in a tough black or putty powder coat finish ON561 Organize & secure your keys with our extensive line of Key Cabinets, see page 1570 ON561 Putty 661.00 ON562 Black 659.00 1563
FILING & SYSTEMS ENVIRASTOR STOR/DRAWER Economical & environmental: 100% recycled material and a minimum of 67% post-consumer waste Sturdy internal liner in the outer shell provides long lasting strength Attractive green graphics are printed on the kraft background with water-based ink Recommended stacking 2-high on metal shelving Record Inside Drawer Dim. No. Size W" x D" x H" /Each OA077 Cheque 9 x 24 x 4 1/2 29.80 OA086 Letter 12 1/4 x 24 x 10 1/2 32.30 OA078 Legal 15 1/4 x 24 x 10 1/2 37.50 STOREX FILE DRAWER SYSTEMS Durable plastic construction with plastic rollers on drawers for smooth operation Convenient built-in label holder Accommodates file folders or hanging files Stackable up to 10 units high with secure interlocking system Ideal for dust and mildew control in schools, hospitals and other public buildings FILE FOLDERS Other colours available d per box of 100 No. No. Description Letter /Box Legal /Box 1/2 CUT REVERSIBLE 9 1/2 pt Manila OB762 21.20 OB761 26.40 9 1/2 pt Ivory OB763 20.30 OB764 27.00 10 1/2 pt Ivory OB765 22.40 OB766 26.80 STRAIGHT CUT 9 1/2 pt Manila OTD040 22.90 OTD243 28.60 10 1/2 pt Ivory OTD056 23.60 OTD258 29.70 ECONO/STOR BOXES Perfect choice for economical storage of semi-active or dead records Features smooth rolled edges provides a clean finish and avoids paper cuts The versatile OA081 can be adapted to your needs, holding up to one cubic foot of legal or letter size files Record Inside Drawer Dim. No. Size W" x D" x H" Colour /Each OE785 Letter 15 x 24 1/4 x 11 1/2 Grey/Granite (front) 51.90 OE786 Letter 15 x 24 1/4 x 11 1/2 Black/Grey (front) 51.90 OE812 Legal 17 7/8 x 24 3/8 x 11 1/4 Grey/Granite (front) 62.20 Record Inside Drawer Dim. No. Size W" x D" x H" /Each OA082 Letter 12 x 24 x 10 14.80 OA079 Legal 15 x 24 x 10 17.90 OA081 Letter or Legal 12 x 15 x 10 7.72 BOXES Fits letter or legal size Dimensions: 12" W x 15" D x 10" H No. OA087 Wood grain finish Stackable up to 850 lbs. 59% post consuming /Each $15.50 No. OA075 100% recycled material Stackable up to 350 lbs. 67% post consuming Comes with attached lid /Each $9.29 OA087 OA075 FLIP TOP ECONOMY CONTAINERS Stacks when lid is closed Nests when empty Recessed carry handles Dimensions: 21 1/2" L x 15" W x 12 1/2" H Capacity: 45 litres TRANSLUCENT No. CD383 Black Top /Each $12.79 No. CF555 Red Top /Each $12.79 GREY No. CD459 /Each $12.79 CD459 FILES Stack up to 5 boxes high Hanging folder rails included Recycled material: 60% Post-consuming: 50% OL943 CD383 No. OL942 Letter size 12 1/2" W x 23 1/4" D x 10 3/8" H /Each $33.30 No. OL943 Legal size 15 1/2" W x 23 1/4" D x 10 3/8" /Each $39.30 CF555 1564
VERTICAL FILING SYSTEMS FILING & SYSTEMS Ideal for filing blueprints, charts, artwork and other oversized documents. Cuts filing and retrieving time; saves on floor space. Exclusive suspension system allows clamps to slip easily in and out of storage racks. Clamps open to 1" to hold up to 100 individual sheets (20 lbs. maximum weight per clamp). HEAVY-DUTY MOBILE STANDS Steel construction with four 3" ball bearing swivel casters (2 lock) Holds 12 hanging clamps in pivot brackets that swing open for easy access to contents Height adjusts from 43 5/8" to 61 5/8" for sheets up to 54" long Base extends 27 1/2" to 37 1/2" Easy assembly Tropic sand finish Wt. No. Description lbs. /Each OE129 Mobile Stand only 47 575.00 OA195 Mobile Stand c/w 12-24" Clamps 61 901.00 OA196 Mobile Stand c/w 12-30" Clamps 63 961.00 OA213 Mobile Stand c/w 12-36" Clamps 65 1044.00 OA197 Mobile Stand c/w 12-42" Clamps 67 1078.00 VERTICAL FILING CABINETS All steel construction provides secure, high density, bulk storage of reproductions Holds up to 12 hanging clamps (clamps not included) Doors can mount for left or right hand operation Locking handle Small cabinet holds 18" to 24" clamps Large cabinet holds up to 36" clamps Colour: Tropic Sand Shipped assembled Wt. No. Description lbs. /Each OB142 Small Vertical File Cabinet: 42" H x 16" W x 27" D 78 726.00 OB143 Large Vertical File Cabinet: 54 1/2" H x 16" W x 39" D 127 908.00 PRINT-LOCK HANGING CLAMPS Clamps hold up to 100 sheets or 20 lbs. Green plastic label holders included Available in natural aluminum with polished chrome plated cast alloy wing knobs and black end caps TUBULAR STEEL WIRE ROLL FILES Low price, high quality appearance Light grey tubular steel frame with chrome plated grids Twin wheel casters (2 lock) Dim.: 23 3/8" H x 18 1/3" W x 14 3/8" D Shipped knocked down Tube Wt. No. Description Size" lbs. /Each OE132 12-tube storage 3 3/4 x 3 3/4 9 124.00 OE133 20-tube storage 2 3/4 x 2 3/4 10 123.00 Clamp Wt. No. Description pkg. lbs. /Each OE135 18" long Hanging 6 6 148.00 OE136 24" long Hanging 6 7 163.00 OE137 30" long Hanging 6 8 192.00 OE138 36" long Hanging 6 9 234.00 OE139 42" long Hanging 6 10 251.00 MOBILE ROLL FILES The ideal form of active filing for engineers, draftsmen, surveyors and designers Materials store upright in square fibreboard tubes; grandstand design allows different size rolls to be stored in one file Sturdy, wood-core construction with laminate beige vinyl covering Swivel casters Shipped knocked down No. of Overall Dimensions Wt No. Tube Size" Tubes W" x D" x H" lbs. /Each OA677 3 3/4 x 3 3/4 21 30 1/8 x 15 3/4 x 29 1/8 52 385.00 OA673 2 3/4 x 2 3/4 20 15 1/4 x 13 1/4 x 23 1/2 22 235.00 OA207 2 3/4 x 2 3/4 50 30 1/8 x 15 3/4 x 29 1/8 53 414.00 OE131 7 x 7 8 30 1/8 x 15 3/4 x 29 1/8 46 374.00 WIRE ROLL FILES Organize, protect and keep oversize docu ments within ready reach Exclu sive dustguard bottom keeps materials clean and protects edges from tearing and bending 2 different compartment heights; four 8" x 8" storage bins Heavy-gauge steel rod construction with white plastic coating; select documents at a glance Swivel casters Dim.: 30 1/2" H x 16 1/4" W x 16 1/2" D Wt. 12 lbs No. OA209 /Each $140.00 UPRIGHT ROLL FILES Economical files keep drawings, blueprints and charts organized and within easy reach Constructed of heavy- duty corrugated fibreboard with walnut wood grain finish Tubes reinforced by plastic moulding Slotted hand hole in back 4 rubber feet O.A.: 22" H (12" high in front) x 15" W x 12" D Weight: 4 lbs. Shipped knocked down No. of Tube No. Tubes Size " /Each OA206 12 3 7/8 sq. 74.90 OA672 20 2 3/4 sq. 79.40 1565
FILING & SYSTEMS STEEL PLAN FILES Welded steel construction, wrap around corners and sturdy inner frame Front supports add stacking strength Files are modular so they can be used individually or in a space saving stack Stack up to five high on a closed base Reinforced top offers additional work and storage space 5 and 10 drawer files can be mixed or matched for customized high volume storage Choice of 6" closed base or 20" high base Baked enamel finish in Tropic Sand or Grey All flat files have museum/archival quality point finish OPTIONAL BASES FOR STEEL PLAN FILES Closed Bases Holds up to five files Raises files 6" off ground Recessed 2 3/4" High Bases Raises files 20" off the floor and raises top of file to a 36" level to provide work space Enclosed back and sides and open front provide extra bookshelf space OB169 OB151 Base sold separately OB146 Two units stacked 5 DRAWER Versatile file stores up to 500 sheets per unit active filing, 750 sheets of semi-active, or 1000 sheets of inactive material Five large capacity 2" deep drawers in three cabinet sizes 10 DRAWER Ideal for high traffic project storage areas Ten 1" deep drawers allow the easiest retrieval of materials from the file and minimize material damage No. Inside Drawer Cabinet Wt. Grey Tropic Sand Description W" x D" x H" W" x D" x H" lbs. /Each OB146 OA651 5 Drawer 37 x 26 x 2 1/8 40 3/8 x 29 3/8 x 16 1/2 177 1274.00 OB148 OA186 5 Drawer 43 x 32 x 2 1/8 46 3/8 x 35 3/8 x 16 1/2 222 1476.00 OB151 OA220 5 Drawer 50 x 38 x 2 1/8 53 3/8 x 41 3/8 x 16 1/2 267 1746.00 OA189 10 Drawer 43 x 32 x 1 1/8 46 3/8 x 35 3/8 x 16 1/2 307 2605.00 OB161 OB162 High Base for OB146, and OA651 Cabinets 37 489.00 OB165 OB166 High Base for OB148, OA186 and 10 Drawer cabinets 42 521.00 OB169 OB170 High base for OB151 and OA220 Cabinets 47 543.00 OB173 OA653 Closed Base for OB146 and OA651 Cabinets 22 222.00 OB176 OA204 Closed Base for OB148, OA186 and 10 Drawer Cabinets 26 239.00 OB179 OA187 Closed Base for OB151 and OA220 Cabinets 30 300.00 Optional locks: OG362-5 Drawer Units /Each $82.60 OG363-10 Drawer Files /Each $82.60 DATA ORGANIZERS Horizontal literature rack All racks easily bolt together with fasteners provided Steel modular, horizontal racks that can be grouped for floor or table mounted storage Capacity for literature or directories up to three inches thick 8" legs (model CA159) available to raise unit off the floor Tan enamel finish Includes: Mounting clips Can be stacked for personalized use! VALUE SORTERS Economical yet sturdy steel/corrugated construction All steel exterior and support shelves Wide shelf fronts have label holders for easy identification of contents (labels included) Quick-lock design for easy assembly without tools Letter Size Compartments: 9 3/4" W x 12 1/2" D x 2 1/2" H Specifications OA157 OA168 CA159 Height " 10 3/4 14 1/4 33 7/8 Width " 33 3/4 33 3/4 3 1/8 Depth " 11 5/8 11 5/8 12 1/8 Opening Width " 11 11 - Opening Depth " 11 1/2 11 1/2 - Opening Height " 3 3 - No. of Openings 9 12 - Paper Width " 8 1/2 8 1/2 - /Each $157.00 $189.00 $73.70 No. No. of Overall Dimensions Wt. Black Grey Compartments W" x D" x H" lbs. /Each OA135 OA132 24 32 1/4 x 13 1/2 x 25 3/4 26 206.00 OA129 OA126 36 32 1/4 x 13 1/2 x 38 36 241.00 OA139 OA141 72 32 1/4 x 13 1/2 x 75 61 413.00 1566
ALL STEEL BOOKCASES Shipped assembled and ready to use Heavy gauge shelves are adjustable on 2" increments allowing numerous configurations FURNISHINGS IONIC L-SHAPED DESK SUITES L-shaped suite that includes a rolling pedestal and a desk panel Made of thermally fused laminate surfaces with 3mm PVC matching edge Material: Laminate No. Dimensions No. of Wt. Black Grey Putty W" x D" x H" Openings lbs. /Each OA490 OA491 OA486 36 x 13 x 40 3 58 269.00 OA492 OA493 OA034 36 x 13 x 66 5 89 449.00 OA036 OA481 OA483 36 x 13 x 78 6 102 515.00 IONIC BOOKCASES Designed for quick and easy assembly Made of thermally fused laminate surfaces with 3mm PVC matching edge Matching back panel Four adjustable floor leveling glides Tested to meet ANSI & BIFMA desking standard Overall Dimensions No. W" x D" x H" Colour /Each OP335 66 x 66 x 29 Dark Brown 880.00 OP336 66 x 66 x 29 Brown 880.00 IONIC SINGLE PEDESTAL DESKS Rectangular desk with hanging box file pedestal Made of thermally fused laminate surfaces with 3mm PVC matching edge No. of Pedestals: 1 Pedestal Location: Left No. Of Drawers: 2 OP337 OP331 OP334 Overall Dimensions No. of No. W" x D" x H" Shelves Colour /Each OP331 30 x 12 x 65 5 Dark Brown 257.00 OP332 30 x 12 x 65 5 Brown 257.00 OP333 30 x 12 x 48 4 Dark Brown 199.00 OP334 30 x 12 x 48 4 Brown 199.00 Overall Dimensions No. W" x D" x H" Colour /Each OP337 66 x 36 x 29 Dark Brown 381.00 OP338 66 x 36 x 29 Brown 381.00 WOOD BOOKCASES Gables and shelves are 11/16" thick Fully assembled Colour: Black See pages 1546-1555 for our complete seating offering OK060 Dimensions No. Shelves W" x D" x H" /Each OK060 4 (3 adjustable, 1 fixed) 36 x 12 x 48 169.00 OK063 5 (4 adjustable, 1 fixed) 36 x 12 x 72 222.00 1567
FILING & SYSTEMS LITERATURE RACKS OA130 OA156 Construction is of sturdy heavy gauge steel Provide a convenient and compact way to store literature Most models accommodate 150 standard 8 1/2" x 11" sheets, while others are wider to hold magazines and special forms OA163 OC543 OA148 OA155 Rotating Literature Racks Optional legs to permit free standing as illustrated are available for all literature Racks. OC547 OC549 OC553 No. Overall Openings Paper No. of Wt. Putty Grey Tan Black W" x D" x H" W" x D" x H" Width" Pockets lbs. /Each OC540 OA152 OA130 OC536 9 3/4 x 4 1/8 x 65 1/2 8 5/8 x 3/4 x 8 1/2 8 1/2 23 32 190.00 OC559 OA166 OA156 OA607 13 1/8 x 4 1/8 x 58 1/2 12 1/8 x 1 x 8 3/4 12 20 38 212.00 OC541 OA161 OA155 OC537 9 3/4 x 4 1/8 x 36 8 5/8 x 3/4 x 8 1/2 8 1/2 11 18 111.00 OC558 OA148 OA162 OA125 13 1/4 x 4 1/8 x 36 12 1/8 x 1 x 8 3/4 12 11 24 132.00 OC543 OA169 OA165 OC539 9 3/4 x 4 1/8 x 21 8 5/8 x 3/4 x 8 1/2 8 1/2 5 9 79.70 OC557 OA163 OA144 OA609 13 1/8 x 2 x 26 1/4 12 1/8 x 5/16 x 5 5/8 12 10 13 82.20 OC545 OA171 OA624 OC544 Optional leg for 9 3/4" wide models (sold individually) 35.00 OC556 OA164 OA167 OC555 Optional leg for 13 1/8" wide models (sold individually) 39.10 ROTATING LITERATURE RACKS OC553 OA149 OA179 OC552 14 1/8 x 14 1/8 x 66 8 5/8 x 3/4 x 8 1/2 8 1/2 92 136 933.00 OC549 OA134 OA158 OC548 14 1/8 x 14 1/8 x 48 1/2 8 5/8 x 3/4 x 8 1/2 8 1/2 44 92 686.00 OC547 OA145 OA128 OC546 14 1/8 x 14 1/8 x 21 1/4 8 5/8 x 3/4 x 8 1/2 8 1/2 20 47 461.00 Can t find what you re looking for? Call us today! 1568
CORK BOARDS Ideal for office or warehouse environments Sturdy aluminum frame Plastic-molded corners protect the board and wall from damage Double-sided cork for added durability ON593 GENERAL SUPPLIES WHITE BOARDS White writing surface provides clean, colourful display Effortless erasing, wipes clean with cloth or felt brush Aluminum frame Plastic corners for board and wall protection Wt. No. Dimensions" lbs. /Each ON593 18 x 24 3.5 24.90 ON594 24 x 36 6 38.80 ON595 36 x 48 10.5 63.70 ON596 48 x 72 18 168.00 ON597 48 x 96 30 206.00 CORK BOARD ACCESSORIES PUSH PINS Plastic head, assorted colours 100/pkg. d per package No. OJ472 /Each $2.81 IMPROMPTU MOBILE WHITE BOARDS Steel frame construction 2 1/2" dia. casters (two lock) Accessory hooks for easel pads Includes magnetic accessory tray for dry erase markers and eraser 42" W x 21 1/2" D x 72" H NON-MAGNETIC Wt. No. Dimensions" lbs. /Each ON530 18 x 24 3.25 22.95 ON531 24 x 36 6 36.25 ON532 36 x 48 10.5 63.65 ON533 48 x 72 18 134.00 ON534 48 x 96 30 164.00 MAGNETIC Wt. No. Dimensions" lbs. /Each ON535 24 x 36 6 90.60 ON536 36 x 48 10.5 149.00 ON537 48 x 72 18 393.00 DRY-ERASE WHITEBOARD WIPES Cleans and restores whiteboards 70 towelettes per can Made with plant-based ingredients No. of Wipes: 70 5" L x 6-7/8" W No. OP447 Mfg. No. 351775 /Each $20.00 ON739 Easel pad not included ON739 Mobile Magnetic White Board 487.00 DURA-INK DRY ERASE INK MARKERS Ideal for white board marking in offices and factories Mark can be removed quickly and easily with dry rag, towel, or eraser No residue or ghosting after mark is removed on most industrial surfaces COVERED DIRECTORY BOARDS Locking glass door on hinges provides a professional appearance, deters unauthorized access to messages Felt grooved black surface 1/4" plexiglass in aluminum frame Dimensions Wt. No. H" x W" lbs. /Each OA471 36 x 24 34 621.00 PE773 Red 2.04 PE774 Black 2.04 PE775 Blue 2.04 PE776 Green 2.04 1569
KEY CABINETS & SELF-RETRACTING KEY CHAINS DOUBLE KEY FILE/SECURITY SYSTEMS Sturdy, welded steel with piano-hinged door and key panels Heavy-duty, 20-gauge steel body and 18-gauge steel door Mount cabinet on wall (mounting screws included), or use on table or shelf Cabinet includes a disc-tumbler lock with two keys Includes: red octagon key tags (model OG894) and white oval key tags (model OG895) same amount as key capacity, cross reference key guide, key loan record sheet, key receipt slip, brass key receipt holders and key collection envelopes The double key system insures proper security and avoids key loss How it works: the master key is fastened to the red tag and filed permanently on a labelled hook; duplicate keys are fastened to white tags on the same hook; each key is indexed in three ways: by hook number, alphabetically by what the key opens and numerically When a key leaves the system, a receipt tag is filled out and hung with the master key and all loans are recorded in the key loan record sheet OG888 KEY RACKS Sturdy, lightweight, welded-steel key rack Mounts on walls and doors in offices or warehouses Dimensions: 13 3/4" W x 2 1/4" H Includes: Numbered key tags, "out key" control tags and mounting screws 20-key capacity No. OG902 /Each $20.10 1570 OG893 Dimensions Key Wt. No. W" x D" x H" Capacity lbs. /Each OG884 8 x 2 1/2 x 12 1/8 30 6 175.00 OG886 14 x 3 1/8 x 17 1/2 60 14 238.00 OG887 14 x 3 1/8 x 17 1/2 90 15 290.00 OG888 16 1/2 x 5 x 20 1/2 120 20 337.00 OG889 16 1/2 x 5 x 20 1/2 180 26 440.00 OG890 16 1/2 x 5 x 20 1/2 240 28 551.00 OG891 16 1/2 x 5 x 31 1 /8 300 42 597.00 OG892 16 1/2 x 5 x 31 1/8 390 46 715.00 OG893 16 1/2 x 5 x 31 1/8 460 49 797.00 EXTRA KEY TAGS & ACCESSORIES OK126 Key Tag, Red Octagon, 20/Pack 9.88 OG895 Key Tag, White Oval, 20/Pack 9.70 OG896 Key Collection Envelopes, 100/Pack 20.00 OG898 Plastic Key Receipt Holders, 120/Pack 52.60 OG899 Key Loan Record Sheets, 24/Pack 7.66 OG897 Cross Reference Index Binder, 30 to 80 Keys 23.90 OG903 Cross Reference Index Binder, 90 to 240 Keys 28.30 OG904 Key Receipt Slips, 250/Pack 4.99 KEY CABINETS Organize and control your office or warehouse with wall mounted key cabinets Heavy gauge steel construction with piano hinged doors and key panels - provide a secure location for key storage Industrial 19-gauge body with 18-gauge door on all models except model OJ922, which has a 20-gauge body and 19-gauge door Durable beige powder coated epoxy finish All models come with numbered slots and key tags OJ924 Dimensions No. Description W" x D" x H" /Each OJ922 30 Key Cabinet 8 x 2 1/2 x 12 59.45 OJ923 60 Key Cabinet 10 3/4 x 3 x 12 1/4 98.50 OJ924 120 Key Cabinet 13 x 3 1/4 x 17 143.00 OJ925 240 Key Cabinet 16 1/2 x 5 x 20 260.00 OJ927 500 Key Cabinet 18 x 5 1/2 x 25 479.00 OJ928 Key Tags - 20/Pack - - - 9.50 DESK DRAWER KEY TRAYS Compact and portable, fits easily into most desk drawers and safes Convert your office desk drawer into a key control system Constructed of molded plastic, making it light and durable Accommodates 56 keys - 8 panels with 7 hooks each Each hook includes two key tags, a self-locking tag for master keys and a standard snap hook key tag for duplicate keys Dimensions: 12" W x 9 7/8" D x 4 3/4" H Colour: Putty Weight: 5 lbs. No. OG900 /Each $133.00 FILE DRAWER KEY RACKS Ideal for secure out-of-the-way key control Sturdy, molded plastic, 40-key rack that comes complete with numbered key tags Clamps on back allows for easy attachment to rear of standard office file drawers and deep desk drawers Dimensions: 12" W x 1 3/4" D x 10" H Includes: Numbered key tags, "out key" control tags and key control chart No. OG901 /Each $35.90 OG900 OG901 Super48 TM Key-Bak Key Chains Exclusive quick-draw extension Choice of two cable types: Kevlar or stainless steel, both 48" Corrosion-proof polycarbonate casing 8 to 10-oz. retraction force Large split ring to hold many keys Belt clip on back ON541 has a leather belt loop Ideal for maintenance, janitorial, safety and security personnel VE525 ON541 Mfg. Cable No. No. Type /Each VE525 S48 Stainless Steel 19.50 TLZ008 S48K Kevlar 17.20 ON541 S48-LEK Kevlar 21.20
SELF RETRACTING ID BADGE AND KEY REEL Sidekick offers maximum security for keys and badges Vinyl ID badge strap and split ring for keys Carabiner Diameter: 1-3/8" (3.5 cm) Key Capacity: 5 ID Badge Capacity: 1 Twist-free end fitting Retraction Force: 0 oz. - 4 oz. With Belt Clip KEY CABINETS & SELF-RETRACTING KEY CHAINS Mfg. Cable Cable No. No. Material Length" Type /Each OP293 okbp-oa21 Zinc Alloy Metal 24 Kevlar Cable 10.20 MID6 SERIES MID SIZE RETRACTORS #6 36" polyester cord Tough polycarbonate case 6-oz. retraction force 360 rotating clip 1" nickel plated split ring Holds 10 keys Belt clip Ideal for maintenance, janitorial, safety and security personnel Mfg. No. No. /Each ON543 0006-001 11.90 SELF RETRACTING KEY CHAINS #487-HD 48" stainless steel cable Textured chrome front Stainless steel mounting bracket 8 to 10-oz. retraction force 1 1/8" diameter split ring Ideal for safety and security personnel SELF RETRACTING ID BADGE & KEY REEL WITH WHISTLE Sidekick offers maximum security for keys and badges Vinyl ID badge strap and split ring for keys Carabiner Diameter: 1 3/8" (3.5 cm) Key Capacity: 5 ID Badge Capacity: 1 FOX40 Classic Safety Whistle Three-chamber pea-less whistle (works wet or dry) Retraction Force: 0 oz. - 4 oz. With Belt Clip Mfg. No. No. /Each ON544 0487-002 19.50 SECURIT TM KEY-BAK KEY CHAINS 48" Kevlar cord Rugged carabineer makes securing the unit to almost anything easy Corrosion-proof polycarbonate casing Mfg. No. No. /Each TLZ010 488B 18.40 THE ORIGINAL KEY-BAK Stainless steel chain extends to 24" Pocket watch size Chrome texture finish 2 1/2 oz. weight With regular belt clip Mfg. No. No. /Each TLZ009 5 15.20 ORIGINAL KEY-BAK SELF- RETRACTING REELS #485-HDK 48" retractable Kevlar cord Chrome front 8 to 10-oz. retraction force 1 1/8" split ring Belt clip Ideal for maintenance, janitorial, safety and security personnel Mfg. Cable Cable No. No. Material Length" Type /Each OP294 okbp-0041 Zinc Alloy Metal 24 Kevlar Cable 17.50 RETRACTABLE MINI-BAK ID BADGE HOLDERS 36" nylon cord Vinyl strap for identification cards (ID) Made of ABS plastic Tested in excess of 180,000 pulls 2-oz. retraction force Belt clip Ideal for maintenance and janitorial, safety and security personnel, identification and communication Mfg. No. No. /Each ON545 0057-005 5.55 RETRACTABLE MINI-BAK KEY RINGS 36" nylon cord Made of ABS plastic 3/4" split ring Tested in excess of 180,000 pulls 2-oz. retraction force Ideal for maintenance and janitorial, safety and security personnel, identification and communication Mfg. No. No. /Each ON542 0485-821 17.30 Mfg. No. No. /Each ON546 0050-005 5.78 1571
GENERAL SUPPLIES BROTHER PT-H100 EASY-HANDHELD LABEL MAKERS One-touch keys quickly access font sizes, styles, frames and patterns Portable, handheld design Cable labelling feature to organize your wires and cables Uses laminated, "TZe" tapes up to 12 mm wide Ideal for indoor or outdoor use Easy-access memory, store up to 9 "Favorite" labels 12 Deco Mode patterns and 9 Auto Design formats Print 1 or 2 lines of text Label faster using one of the decorative pre-formatted label designs Split-back labels for easy peel and stick Operates on 6 AAA batteries (not included) No. ON751 /Each $57.00 BROTHER PT-H300 PORTABLE PROFESSIONAL LABELLERS Preview your work on the large vivid bright display Create durable labels for indoor or outdoor use Print multiple lines of text and graphics Intuitive one-touch keys for quick, easy label formatting Fast print speeds and pre-designed labels Hundreds of built-in symbols, fonts, frames, and barcodes Powered by 6 AA batteries (included) Optional rechargeable Li-ion battery pack available Includes: 18 mm laminated starter tape, batteries, wrist strap and manual No. ON752 /Each $115.00 REPLACEMENT BATTERIES XB873 AAA, Alkaline-24/pkg 19.10 BROTHER PT-H300LI RECHARGEABLE PROFESSIONAL LABELLERS Preview your work on the large vivid bright display Create durable labels for indoor or outdoor use Print multiple lines of text and graphics Convenient one-touch keys for quick, easy label formatting Fast print speeds and pre-designed labels Hundreds of built-in symbols, fonts, frames, and barcodes Save up to 50 labels to internal memory Includes 18 mm laminated starter tape, rechargeable Li-ion battery pack, AC adapter, wrist strap, manual 1-year limited warranty and free phone support for the life of your product No. ON753 /Each $169.00 TZE TAPE CARTRIDGES OB650 9 mm (3/8") Black on White 20.90 ON443 12 mm (1/2") Black on White 22.90 OB654 18 mm (3/4") Black on White 27.50 See page 1573 for other available colours. TZE TAPE CARTRIDGES OB650 9 mm (3/8") Black on White 20.90 ON443 12 mm (1/2") Black on White 22.90 See page 1573 for other available colours. REPLACEMENT BATTERIES XB872 AAA, Alkaline-24/pkg 17.40 PT-D600 LABEL MAKERS Quickly creates professional-looking labels using the built-in keyboard or connects to a computer to create more personalized labels A full-colour graphical display offers easy access to formatting menus as well as the ability to preview actual label appearance before printing Includes a 24 mm TZe starter tape, a USB cable and an AC power adapter Tape Sizes: 3.5 mm, 6 mm, 9 mm, 12 mm, 18 mm, 24 mm Display Type: LCD Colour Keyboard Type: Qwerty Colour: Black Tape Technology: Thermal Transfer Power Source: AC Adapter and Batteries Batteries: 6 AA (Not Included) Interface Connection: USB Tape Length: 8 m Tape Family: TZe No. OP196 /Each $159.00 TZE TAPE CARTRIDGES OB650 9 mm (3/8") Black on White 20.90 ON443 12 mm (1/2") Black on White 22.90 OB654 18 mm (3/4") Black on White 27.50 OB659 24 mm (1") Black on White 31.90 See page 1573 for other available colours. TZE TAPE CARTRIDGES OB650 9 mm (3/8") Black on White 20.90 ON443 12 mm (1/2") Black on White 22.90 OB654 18 mm (3/4") Black on White 27.50 See page 1573 for other available colours. Ask us about volume prices! In many cases you will benefit from quantity prices. 1572
BROTHER PT-E300VP INDUSTRIAL HANDHELD LABELLING TOOL KITS Large back-lit LCD display with application icons 5 label application keys to help reduce key strokes QWERTY keyboard Advanced serialization options Supports 9 industry standard linear barcodes Automatically sets the right size font and label size based on what you typed in Compatible with durable "TZe" laminated tapes up to 18 mm Supports 4 sizes of heat shrink tube tapes Easy to load, drop-in cartridge system Includes: Lithium-ion rechargeable battery, AC adapter, starter cassette, wrist strap and carrying case No. ON750 /Each $189.00 GENERAL SUPPLIES BROTHER PT-P700 LABEL PRINTERS Full featured, powerful yet simple office labelling No software installation required simply connect to PC or Mac and start labelling Prints on six different laminated label widths, up to 24 mm wide Compact, with built-in automatic cutter Prints multiple lines of text and graphics New labelling software PT Editor 5.1 detects the label colour in the PT-P700 and shows it on computer screen Prints up to 3 times faster Download feature - provides ability to download labels from web site Uses 6 AA batteries (optional) or AD- E001 power adapter (included) No. ON754 /Each $125.00 REPLACEMENT BATTERIES No. XB872 AA, Alkaline-24/pkg /Each $17.40 TZE (ECO-FRIENDLY) SERIES TAPE CARTRIDGES FOR P-TOUCH 8 m (26.2') long No. Colour /Each 9 MM (3/8") OB648 Black on Clear 19.10 OB650 Black on White 20.90 OB651 Blue on White 21.20 OB655 White on Black 25.50 OB667 Red on White 20.90 No. Colour /Each 12 MM (1/2") OB649 Black on Clear 20.50 ON443 Black on White 22.90 OB653 Blue on White 23.50 OB656 White on Black 27.50 OB657 Black on Yellow 22.90 OB668 Red on White 23.50 No. Colour /Each 18 MM (3/4") OB661 Black on Clear 25.50 OB654 Black on White 27.50 OB663 Blue on White 27.90 OB662 White on Black 31.90 OB666 Black on Yellow 27.70 OB669 Red on White 27.50 No. Colour /Each 24 MM (1") OB658 Black on Clear 28.90 OB659 Black on White 31.90 OB664 Blue on White 31.90 OB660 Black on Yellow 31.90 OB670 Red on White 31.90 BROTHER QL-570 LABEL PRINTERS Up to 68 labels per minute print speed Up to 300 x 600 dpi print resolution Prints on labels up to 2.4" (62 mm) label width Built-in automatic heavy-duty cutter Easy to use drop-in rolls make it easy to change supplies Detects size of the roll in the machine and adjusts the onscreen template User-friendly software with 3 label design modes (Snap, Express and Professional) Easy connection to PC via included USB cable Compatible with PC and Mac OS systems Software also compatible with current Microsoft applications Integrates with MS Word, Excel, Outlook and P-touch editor address book Uses DK series labels No. ON364 /Each $145.00 DK SERIES LABELS BROTHER QL-720NW PROFESSIONAL, HIGH-SPEED LABEL PRINTERS WITH BUILT-IN ETHERNET & WIRELESS NETWORKING Flexible connectivity features both Ethernet and Wireless (802.11b/g/n) interfaces Offers a serial interface for printing, downloading label templates into memory or use with a scanner Ultra-fast, printing up to 93 labels per minute Create cost-effective paper labels for packages, envelopes, file folders, DVDs, banners, and more High-resolution (up to 300 x 600 dpi) printing, for crisp text, graphics and barcodes Print labels wirelessly using the free, Brother iprint&label app download Use the automatic cutter for precise cuts after each label is printed or to create custom-sized labels Convenient, drop-in tape rolls Windows and Mac compatible Easy to integrate and manage on a network using Brother's network management tools and free bpac software development kit "Label Collection" feature provides beautiful, pre-designed labels and banners with commonly-used text Uses DK Series labels No. ON755 /Each $250.00 No. Series Description /Each ON756 DK1204 Multi Purpose Labels (400) 17 mm x 54 mm (2/3" x 2 1/8") 17.60 ON757 DK1207 CD/DVD Film Labels (100) 58 mm x 58 mm (2 1/3" x 2 1/3") 25.60 ON758 DK1208 Large Address Labels (400) 38 mm x 90 mm (1 1/2" x 3 1/2") 24.30 ON759 DK1209 Small Address Labels (800) 29 mm x 62 mm (1 1/7" x 2 3/7") 30.70 ON760 DK1219 Round Paper Labels (1200) 12 mm Dia. (0.47" Dia.) 27.10 ON761 DK2205 Continuous Length Paper Tape 62 mm x 30.48 m (2 3/7" x 100') 32.90 1573
GENERAL SUPPLIES EMBOSSING SYSTEMS Embosses Dymo 1/2" vinyl and metal tapes that withstand weather, temperature and corrosion Heavy-duty cast aluminum body construction comes with built-in hole punch and front scissors cut-off Includes: Label maker, 1 roll of 1/2" x 16' aluminum tape (no adhesive), 1 roll of 1/2" aluminum tape (with adhesive) and one horizontal character wheel Wt. No. Description lbs. /Each OB687 Embossing System 2.5 241.00 OB688 1/2" x 16' Tape Aluminum (no adhesive) - 4.73 OB689 1/2" x 21' Tape Stainless Steel (no adhesive) - 5.98 OB690 1/2" x 12' Tape Aluminum (with adhesive) - 7.44 COLD-LAMINATING SYSTEMS Heat-free way to finish your documents in one system No warming, waiting, damaging heat or irritating fumes No special equipment or tools needed Easy 3-step operation: load, turn handle and trim Aggressive adhesive holds items securely in place To protect business cards, ID's, luggage tags Refill cartridges & supply rolls easy to select Smart design makes them easy to install One year limited warranty OE660 8 1/2" Wide System 213.00 OE661 System Cartridge Refills, 100'/Roll, 100 Applications Front and Back Lamination 59.70 OE662 12" Wide System 321.00 OE663 System Cartridge Refills, 100'/Roll, 100 Applications Front and Back Lamination 95.20 LABELMANAGER 210D ELECTRONIC LABELLERS Easy navigation Large graphical display shows text effects on screen before you print Prints 1/4", 3/8", 1/2" widths 6 font sizes, 7 styles and 8 different boxes to customize your label Quick access buttons to symbols and diacritical's (i.e. é, à, ç,...) Auto power-off to extend battery life Requires 6 AA batteries not included and one horizontal character wheel LETRATAG PLUS LT-100H Hand-held label maker prints on LetraTag LT labels available in paper, plastic, metallic, magnetic and iron-on 13-character LCD screen lets you see font effects on screen before you print Prints up to 2 lines in 5 font sizes, 7 print styles, 8 box styles and 195 symbols Can add popular text features like multiple font styles, underlining, bolding, text sizing and more 9-label memory Easy-to-use navigation buttons Auto-off power saver Date stamp 3 languages option: English, French, Spanish Direct thermal print technology- no ribbons, ink or toner cartridges needed Uses 4 AA batteries (not included) or optional AC adaptor Includes: LetraTag Plus, mountable magnetic holder, 1/2" white paper label cassette, 1/2" clear plastic label cassette, instruction manual and warranty card No. OG478 /Each $51.40 LABELS Mfg Type No. No. of Labels Colour /Each OD621 91330 1/2" Paper Black on White 8.08 ON377 16952 1/2" Plastic Black on Clear 12.20 OD622 91331 1/2" Plastic Black on White 9.50 OJ726 91333 1/2" Plastic Black on Red 10.80 OJ501 91335 1/2" Plastic Black on Blue 9.50 OD623 91332 1/2" Plastic Black on Yellow 9.50 OD627 91338 1/2" Metallic Black on Silver 9.50 AA BATTERIES, PACK OF 24 No. XB872 /Each $17.40 LABELMANAGER 360D ELECTRONIC LABELLERS Large 40 x 70 mm screen displays two lines of label text Graphical display lets you see text effects on screen before you print customized labels Choose from 3 fonts and 7 text styles Highlight your text with 8 box styles or underlining Uses Dymo D1 labels in 6, 9, 12 and 19 mm widths 9-label memory and "save text" feature Print up to 10 copies of the same label Powered by a rechargeable lithium-ion battery Includes: Electronic label maker, lithium-ion battery, D1 starter label cassette black on white, 12 mm x 3 m, charging cable ON370 210D LabelManager 75.20 OJ733 3/8" (9 mm) Black/White Label 22.95 OB699 1/2" (12 mm) Black/White Label 21.95 XB872 AA Batteries 24/pack 17.40 ON368 360D LabelManager 130.00 OJ733 3/8" (9 mm) Black/White Label 22.95 OB699 1/2" (12 mm) Black/White Label 21.95 1574
TIME CLOCKS Large, easy-to-read analog clock face LED display of year, month and date Automatic or manual printing Print window with light Automatically adjusts for Daylight Savings Time, short months, leap years and power outages Selectable for 4-digit imprint Built-in battery backup GENERAL SUPPLIES WALL CLOCKS 12/24 H BATTERY OPERATED 12" diameter round office wall clock 12/24 hour Glass face Black chrome frame No. HT072 /Each $35.15 HT072 SPECIFICATIONS: Power Supply: Power Consumption: Ambient Temp.: Humidity: Dimensions: Weight: 110/120 AC ± 10% (50/60 Hz) Normal 3 W, Max. 12 W 14 F - 113 F (-10 C - 45 C) 10 % - 90 % (no condensation) 6 3/4" W x 6 1/4" D x 8" H (150 x 172 x 165 mm) 6 lbs. (2.7 kg) BATTERY OPERATED 14" diameter quartz clock Silent quartz movement with second hand Use 1 AA battery Glass face Chrome frame No. HT071 /Each $49.95 HT071 HN140 English 638.00 ATOMIC TIME CLOCKS Prints in multiple languages including English and French Ability to synchronize to the atomic clock Cartridge ribbon for easy change Illuminated print window and guide improves efficiency on time card stamping Locking enclosure prevents tampering with settings and reduces time card fraud Ambient Temperature: -10 C to 45 C Humidity: 10% to 90% (no condensation) Unit Dimensions: 5.5" W x 6.9" D x 6.1" H Digital/Analog: Digital Voltage: 100-240 V Ribbon Colour: Black No. OP446 /Each $510.00 TIME CLOCK ACCESSORIES Card rack is adjusted for standard 8 1/4" long cards Fits 25 standard time cards Rack is adjustable to accommodate cards of different widths HA004 WALL CLOCK Battery operated 12-3/4" diameter round office wall clock Wall mount Plastic face Black plastic frame No. OP237 /Each $34.90 OP237 JUMBO DIGITAL WALL CLOCKS Large 17" display Visibility from 30' away Displays (indoor) temperature in Celsius or Fahrenheit Calendar displays month, date and day of the week 12 or 24-hour settings This wall clock has an atomic self-adjusting feature that picks up time calibration signals automatically Clean, brushed-aluminum-look plastic frame Mount on your wall or use the built-in stand to place on a flat surface Includes three C batteries No. XD075 /Each $112.00 HA001 HA004 Card Rack 69.00 HA001 1000 Time Cards, English 79.90 HA020 1000 Time Cards, French 79.90 HN141 Replacement Ribbon for Time Clock 38.10 1575
GENERAL SUPPLIES INDOOR/OUTDOOR MAILBOXES Constructed of heavy gauge reinforced extruded aluminum with clear anodized surface materials for durability, providing maximum protection The trim and doors are striated to resist scratching and marring Meets or exceeds Canada Post standards Material: Reinforced extruded aluminum Door Height: 16" Door Width: 5-1/2" Orientation: Vertical Loading Access: Top F.O.B. Montreal, QC. CMC OP342 OP384 OP360 OP348 OP354 INDOOR SINGLE DECK RECESSED MAILBOXES No. of Overall Dimensions No. Doors W" x H" x D" Mounting /Each OP340 3 18-7/8 x 19-1/8 x 7-1/8 Wall 175.00 OP341 4 24-3/8 x 19-1/8 x 7-1/8 Wall 200.00 OP342 5 29-7/8 x 19-1/8 x 7-1/8 Wall 250.00 OP343 6 35-3/8 x 19-1/8 x 7-1/8 Wall 295.00 OP344 7 40-7/8 x 19-1/8 x 7-1/8 Wall 335.00 OP345 8 46-3/8 x 19-1/8 x 7-1/8 Wall 375.00 OP372 OP396 INDOOR SINGLE DECK SEMI-RECESSED MAILBOXES No. of Overall Dimensions No. Doors W" x H" x D" Mounting /Each OP346 3 18-7/8 x 19-1/8 x 7-1/8 Wall 205.00 OP347 4 24-3/8 x 19-1/8 x 7-1/8 Wall 245.00 OP348 5 29-7/8 x 19-1/8 x 7-1/8 Wall 300.00 OP349 6 35-3/8 x 19-1/8 x 7-1/8 Wall 355.00 OP350 7 40-7/8 x 19-1/8 x 7-1/8 Wall 385.00 OP351 8 46-3/8 x 19-1/8 x 7-1/8 Wall 405.00 OUTDOOR SINGLE DECK WALL MOUNTED MAILBOXES No. of Overall Dimensions No. Doors W" x H" x D" Mounting /Each ALUMINUM SHROUD OP382 3 18-7/8 x 19-1/4 x 7-1/4 Wall 385.00 OP383 4 24-3/8 x 19-1/4 x 7-1/4 Wall 425.00 OP384 5 29-7/8 x 19-1/4 x 7-1/4 Wall 505.00 OP385 6 35-3/8 x 19-1/4 x 7-1/4 Wall 565.00 OP386 7 40-7/8 x 19-1/4 x 7-1/4 Wall 605.00 OP387 8 46-3/8 x 19-1/4 x 7-1/4 Wall 695.00 STEEL SHROUD OP388 3 18-7/8 x 19-1/4 x 7-1/4 Wall 265.00 OP389 4 24-3/8 x 19-1/4 x 7-1/4 Wall 305.00 OP390 5 29-7/8 x 19-1/4 x 7-1/4 Wall 385.00 OP391 6 35-3/8 x 19-1/4 x 7-1/4 Wall 445.00 OP392 7 40-7/8 x 19-1/4 x 7-1/4 Wall 485.00 OP393 8 46-3/8 x 19-1/4 x 7-1/4 Wall 575.00 INDOOR SINGLE DECK SURFACE MOUNT MAILBOXES No. of Overall Dimensions No. Doors W" x H" x D" Mounting /Each OP352 3 18-7/8 x 19-1/8 x 7-1/8 Wall 205.00 OP353 4 24-3/8 x 19-1/8 x 7-1/8 Wall 245.00 OP354 5 29-7/8 x 19-1/8 x 7-1/8 Wall 300.00 OP355 6 35-3/8 x 19-1/8 x 7-1/8 Wall 355.00 OP356 7 40-7/8 x 19-1/8 x 7-1/8 Wall 385.00 OP357 8 46-3/8 x 19-1/8 x 7-1/8 Wall 405.00 OUTDOOR DOUBLE DECK WALL MOUNTED MAILBOXES No. of Overall Dimensions No. Doors W" x H" x D" Mounting /Each ALUMINUM SHROUD OP358 3 18-7/8 x 38-1/4 x 7-1/4 Wall 695.00 OP359 4 24-3/8 x 38-1/4 x 7-1/4 Wall 755.00 OP360 5 29-7/8 x 38-1/4 x 7-1/4 Wall 910.00 OP361 6 35-3/8 x 38-1/4 x 7-1/4 Wall 1070.00 OP362 7 40-7/8 x 38-1/4 x 7-1/4 Wall 1155.00 OP363 8 46-3/8 x 38-1/4 x 7-1/4 Wall 1345.00 STEEL SHROUD OP364 3 18-7/8 x 38-1/4 x 7-1/4 Wall 575.00 OP365 4 24-3/8 x 38-1/4 x 7-1/4 Wall 635.00 OP366 5 29-7/8 x 38-1/4 x 7-1/4 Wall 790.00 OP367 6 35-3/8 x 38-1/4 x 7-1/4 Wall 950.00 OP368 7 40-7/8 x 38-1/4 x 7-1/4 Wall 1035.00 OP369 8 46-3/8 x 38-1/4 x 7-1/4 Wall 1225.00 INDOOR/OUTDOOR SINGLE DECK PEDESTAL MAILBOXES No. of Overall Dimensions No. Doors W" x H" x D" Mounting /Each ALUMINUM SHROUD OP394 3 18-7/8 x 19-1/4 x 7-1/4 Pedestal 625.00 OP395 4 24-3/8 x 19-1/4 x 7-1/4 Pedestal 665.00 OP396 5 29-7/8 x 19-1/4 x 7-1/4 Pedestal 740.00 OP397 6 35-3/8 x 19-1/4 x 7-1/4 Pedestal 840.00 OP398 7 40-7/8 x 19-1/4 x 7-1/4 Pedestal 930.00 OP399 8 46-3/8 x 19-1/4 x 7-1/4 Pedestal 1010.00 STEEL SHROUD OP400 3 18-7/8 x 19-1/4 x 7-1/4 Pedestal 505.00 OP401 4 24-3/8 x 19-1/4 x 7-1/4 Pedestal 545.00 OP402 5 29-7/8 x 19-1/4 x 7-1/4 Pedestal 620.00 OP403 6 35-3/8 x 19-1/4 x 7-1/4 Pedestal 720.00 OP404 7 40-7/8 x 19-1/4 x 7-1/4 Pedestal 810.00 OP405 8 46-3/8 x 19-1/4 x 7-1/4 Pedestal 890.00 1576 INDOOR/OUTDOOR DOUBLE DECK PEDESTAL MAILBOXES No. of Overall Dimensions No. Doors W" x H" x D" Mounting /Each ALUMINUM SHROUD OP370 3 18-7/8 x 38-1/4 x 7-1/4 Pedestal 945.00 OP371 4 24-3/8 x 38-1/4 x 7-1/4 Pedestal 1010.00 OP372 5 29-7/8 x 38-1/4 x 7-1/4 Pedestal 1170.00 OP373 6 35-3/8 x 38-1/4 x 7-1/4 Pedestal 1330.00 OP374 7 40-7/8 x 38-1/4 x 7-1/4 Pedestal 1490.00 OP375 8 46-3/8 x 38-1/4 x 7-1/4 Pedestal 1650.00 STEEL SHROUD OP376 3 18-7/8 x 38-1/4 x 7-1/4 Pedestal 825.00 OP377 4 24-3/8 x 38-1/4 x 7-1/4 Pedestal 890.00 OP378 5 29-7/8 x 38-1/4 x 7-1/4 Pedestal 1050.00 OP379 6 35-3/8 x 38-1/4 x 7-1/4 Pedestal 1210.00 OP380 7 40-7/8 x 38-1/4 x 7-1/4 Pedestal 1370.00 OP381 8 46-3/8 x 38-1/4 x 7-1/4 Pedestal 1530.00
GENERAL SUPPLIES HOOK & LOOP FASTENERS Alternative to zippers, screws, snaps and bolts. One nylon strip consists of tiny hooks and another consisting of soft pliable loops. Simply press together to fasten and pull apart to open. Current applications include the apparel, furniture, packaging and printing industries. Available in peel and stick adhesive backed models or regular style (sew-on) models. Hook Loop Length White Black White Black Width" yds /Each PEEL & STICK (ADHESIVE BACKED) OC439 OC440 OC441 OC442 3/4 10 17.00 OC500 OC501 OC502 OC503 1 10 20.80 OC447 OC448 OC449 OC450 3/4 25 48.70 OC504 OC505 OC506 OC507 1 25 50.10 REGULAR - SEW-ON OC455 OC456 - OC458 3/4 10 9.30 OC508 OC509 OC510 OC511 1 10 10.30 OC463 OC464 OC465 OC466 3/4 25 20.70 OC512 OC513 OC514 OC515 1 25 26.10 OC439 OC471 Hook Loop Length Dots White Black White Black Width" yds /Rolls /Each ADHESIVE BACKED DOTS OC471 OC472 OC473 OC474 1/2 10 500 21.30 OC475 OC476 OC477 OC478 3/4 10 500 39.70 OC483 OC484 OC485 OC486 3/4 50 2110 179.00 ROLODEX MESH 3-PACK HANGING WALL FILES Includes 3 hanging wall files and hanger system Arched design allows for easy access to file contents Accommodates materials up to 13 1/2" wide Ideal for panels, partitions up to 2 7/8" thick Black mesh steel construction 14" W x 6.68" D x 38.45" H No. OTC353 Mfg. No. 2196 /Each $59.20 ROLODEX MESH LETTER WALL FILES Mesh wall file offers easy access to your files Accommodates materials up to 13 1/2" wide Mounts flush to wall with included hardware Black mesh steel construction 13.98" W x 3.27" D x 10.28" H No. OTC351 Mfg. No. 21931 /Each $30.20 ROLODEX TWO-TONE MESH LAPTOP STANDS Adjusts for optimal viewing and keyboard positions Ventilated platform keeps laptop cool Four adjustable settings from 12-25 for easier viewing and typing Holds up to 15 lbs. Includes cord organizer Two tone black and silver 11.10" W x 12.92" L x 3.50" H No. OH929 Mfg. No. 82410 /Each $46.00 DESKTOPPER DESKTOP FILES 100% post-consumer waste Includes five hanging folders with tabs and inserts Black plastic, legal size No. OTD743 /Each $30.80 RECYCLING DESKSIDE CONTAINERS Promote fast, easy and efficient recycling collection All plastic construction will not rust, chip or peel Blue colour in a variety of shapes and capacities to suit your workspace Recycling symbol imprinted on the containers Contains post consumer recycled resin (PCR) exceeding EPA Guidelines Designed to be used with existing office containers and accessories Easy and effective way to collect waste paper Capacity: 13 5/8 US quarts 11 3/8" L x 8 1/4" W x 12 1/8" H Weight: 2 lbs. No. NG274 Mfg. No. FG295573BLUE /Each $11.90 SOFT WASTEBASKETS Durable, lightweight plastic baskets will not rust, chip or dent Rolled rims offer durability and easy cleaning Colour: Black Capacity: 28 quarts 14 3/8" L x 10 1/4" W x 15" H Weight: 2 lbs. No. NG978 Mfg. No. FG295600BLA /Each $13.70 CASH BOXES Ideal for money, jewelry and other personal items Durable steel construction Removable 7-compartment tray for organized storage Dimensions for medium size box: 9.78" L x 7.12" W x 3.56" H Dimensions for large size box: 11.8" L x 9.5" W x 3.56" H Colour: grey Includes 2 Keys Available in medium or large key locking cash boxes WASTEBASKET COVER No. NG980 Mfg. No. FG306600BLA /Each $23.10 ON577 Medium Size 18.50 ON578 Large Size 24.30 1577
GENERAL SUPPLIES PERMANENT MARKERS SHARPIE LIQUID TIP Instant drying, writes on all surfaces Waterproof No. Black Red Blue Tip /Each OB943 - - Conical 1.93 OB947 OB948 OB949 Chisel 1.93 #15 SHARPIE Fine point marker Extra tough tip that won't spread or mush High visibility ink 6 dozen/case No. Colour /Each SHARPIE PA393 Black 1.50 PA395 Blue 1.50 PA396 Green 1.50 PA397 Purple 1.50 PA392 Red 1.50 PA391 Yellow 1.50 PA394 Orange 1.50 PA398 Brown 1.50 SUPER SHARPIE OD376 Black 2.30 OD377 Red 2.30 OD378 Blue 2.30 SHARPIE INDUSTRIAL MARKERS Resists chemicals, light and heat up to 500 o F Writes on glass, metal, greasy parts For industrial use Fine point Black No. OTJ874 /Each $1.55 ULTRAFINE SHARPIE Permanent marker Black Red Blue /Each OTJ964 OTJ965 OTJ966 1.50 LUMOCOLOR PERMANENT MARKERS Dry Safe ink: can be left uncapped for days without drying out Fine point Black No. OB386 /Each $2.44 MARKS-A-LOT PERMANENT MARKERS Chisel tip Comfortable grip Water-resistant, smear-proof Writes on any surface Non-toxic Black No. OD458 /Each $1.20 AVERY HI-LITER Replaces underlining Long lasting Quick drying Available in 4 colours BALLPOINT PENS "HI-TECPOINT V" ROLLING BALLPOINT PENS Liquid ink Ultra-fine point No. Colour /Each OTI657 Blue 2.76 OTI658 Black 2.76 OTI659 Green 2.78 OTI662 Red 2.76 BALLPOINT PENS Box of 12 Blue Black No. No. /Box Fine point OTI152 OTI154 3.15 Medium point OTI148 OTI150 3.81 BALLPOINT PENS Rubberized grip Blue Black Fine Point Medium Point Fine Point Medium Point No. No. No. No. /Each Regular OTI204 OTI201 OTI206 OTI203 0.79 Retractable OTI210 OTI207 OK596 OTI209 0.97 OMNICHROM 108 All purpose marking pencil Writes on virtually any surface, ie. glass, plastics, wood, polished stone and metal Lines can be removed from glossy surface without leaving a trace Non-penetrating leads are water-soluble and highly break resistant Available in 6 brilliant colours ELECTRIC PENCIL SHARPENERS For standard size pencils Stops automatically when pencil is sharpened Colour: Black No. OB641 /Each $57.50 MIRADO PENCILS Box of 12 d per Pencil Lead No. Color /Each OB606 White 2.15 OB607 Red 2.15 OB609 Black 2.15 OB610 Yellow 2.15 OB611 Blue 2.15 COMFORT MATE Mechanical pencil 0.5 mm point 12/Box No. OK745 /Each $8.67 Rubberized body Assorted colours LEAD 0.5 mm HB 12-lead tube No. OTI724 /Each $1.51 No. Yellow Pink Blue Green Type /Each OB939 OB940 OB941 OB942 Fluorescent 1.05 Degree of No. Hardness /Box OC957 HB 3.50 1578
CLIPBOARDS Masonite clipboard available for letter or legal size. OF245 OF245 9" x 12" Letter Size 3.29 OF246 9" x 15" Legal Size 3.39 SHEET HOLDERS Side hinged form holder with steel clamp Closes like a box to protect your documents Storage compartment on the side 30-sheet capacity Aluminum Letter size No. OE210 /Each $39.30 SHEET PROTECTORS Copysafe TM top loading sheet protectors feature a reinforced 3 hole ring edge Holds 8 1/2" x 11" in non-glare polypropylene Heavy weight, 100/pkg. No. OC376 /Each $20.90 GENERAL SUPPLIES PAPER MULTI PURPOSE COPY PAPER For everyday use on all black and white equipment using plain paper. Recommended for copiers, plain paper faxes and laser printers. Acid free for long life. 20 lbs., 92 bright. 500/Pkg. No. Dimensions Colour /Each OA316 Letter 8 1/2" W x 11 " L White 5.59 OC219 Legal 8 1/2" W x 14" L White 8.19 EARTHCHOICE PAPER Multi purpose copy paper Made with strict environmental concerns 92 bright 500 sheets/pack 20 lbs. FSC certified and endorsed by the Rainforest Alliance No. Dimensions Colour /Each OJ956 Letter 8 1/2" W x 11" L White 5.85 OJ957 Legal 8 1/2" W x 14" L White 7.85 FILE FOLDERS Other colours available VINYL BINDERS Round "No Gap" rings prevent gapping and misalignment Two inside pockets with pocket guard to secure documents Label holder on spine Letter size Size" Black Blue Green Red Grey /Each 1 OT077 VEN052 OT080 OB780 OT079 5.16 2 OT091 OT092 OT094 OT096 OT093 9.13 3 OT101 OT103 OJ986 OT102 N/A 13.80 EXPANDING FILES Red fibre Elastic cord closing flap Without compartments No. Document Size Expansion Size /Each OJ870 Letter 3 1/2" 4.21 OJ868 Legal 3 1/2" 4.56 OJ874 Letter 5 1/4" 4.99 OJ872 Legal 5 1/4" 5.23 WHITE PAPER PADS 96 sheets per pad Five pads per package No. Size /Pack OTF720 Letter, Ruled 5/16" 10.20 OTF719 Letter, Ruled 1/4" 9.98 OK913 Legal, Ruled 5/16" 20.60 OK920 Letter, Quadruled, 4 sq./in. 10.90 OK919 Legal, Quadruled, 4 sq./in. 20.20 d per Box of 100 No. No. Description Letter /Box Legal /Box 1/2 CUT REVERSIBLE 9 1/2 pt Manila OB762 21.20 OB761 26.40 9 1/2 pt Ivory OB763 20.30 OB764 27.00 10 1/2 pt Ivory OB765 22.40 OB766 26.80 STRAIGHT CUT 9 1/2 pt Manila OTD040 22.90 OTD243 28.60 10 1/2 pt Ivory OTD056 23.60 OTD258 29.70 MESSAGE PADS POST-IT NOTE PADS Removable self stick notes adhere to almost any surface 100 sheets/pad Colour: Yellow 12 pads/pack 3" X 3" HIGHLAND NOTE PAD No. /Pack OC140 4.32 1 1/2" X 2" HIGHLAND NOTE PAD OC141 2.62 RECYCLED POST-IT SELF- ADHESIVE NOTEPADS 100% recycled content 55-95% post-consumer waste Pads of 100 sheets Available in yellow or sun washed pier colours No Description /Pack 16 PADS/ PACKAGE OK994 3" x 3"- Yellow 35.90 OK993 3" x 3"- Sun-Washed Pier 37.90 OK996 3" x 5"- Yellow 52.40 OK995 3" x 5"- Sun-Washed Pier 52.90 24 PADS/ PACKAGE OK992 1 1/2" x 2"- Yellow 24.10 OK991 1 1/2" x 2"- Sun-Washed Pier 26.10 OC140 1579
GENERAL SUPPLIES TAPE & DISPENSERS OL205 DESKTOP TAPE DISPENSERS Anti-skid bottom OC147 1" core Colour: Black Wt. No. Description lbs. /Each OL205 1/2" (12 mm), 3/4" (19 mm) 2 4.29 TRANSPARENT TAPE Scotch 600 series, Highland 500 series No. No. Description Scotch /Each Highland /Each 12 mm x 33 m w/dispenser OC142 3.62 OC147 1.52 18 mm x 33 m w/dispenser OC143 4.10 OC144 1.58 12 mm x 33 m Refill Roll OC145 2.77 OC146 0.83 18 mm x 33 m Refill Roll OC148 3.63 OC150 0.95 TRANSPARENT & INVISIBLE (MAGIC TM TAPE) Scotch 810 series, Highland 6200 series No. No. Description Scotch /Each Highland /Each 12 mm x 33 m w/dispenser OC152 3.57 OC153 1.93 18 mm x 33 m w/dispenser OC154 4.68 OC155 2.32 12 mm x 33 m Refill Roll OC156 2.88 OC157 1.18 18 mm x 33 m Refill Roll OC158 4.22 OC159 1.77 STRAIGHT SCISSORS All purpose economical scissors with stainless steel blades Plastic handles Ideal for light-duty cutting. ROTEX RUBBER BANDS Packed 1/4 lb. per box 85% rubber content FOLDBACK CLIPS Box of 12 Overall Cut No. Length" Length" /Each OE018 8 3 1/4 3.21 GS5 PERSONAL SHREDDERS Strip cut personal shredder intended for one user Shreds 7.4 feet per minute Auto start/stop and reverse 70 db 12.50" W x 12.75" D x 13.50" H Not intended for CDs d per Box Mfg. Dimensions No. No. L" x W" /Each OB960 16 2 1/2 x 1/16 2.74 OB962 19 3 1/2 x 1/16 4.66 OB965 32 3 x 1/8 2.76 OB966 33 3 1/2 x 1/8 2.74 OB970 64 3 1/2 x 1/4 2.72 SX19-09 CROSS CUT SMALL SHREDDERS Cut Size: 4 x 40 mm Security Level: P-4 Noise Level: < 60 db Jam-free technology with continuous sensing Shreds CDs/DVDs, credit cards, staples and paper clips Automatically shuts down when bin is opened Colour: Black d per box No. Size Capacity /Each OG978 1/2" 1/4" 1.07 OT308 3/4" 5/16" 1.22 OT309 1" 3/8" 1.68 OT313 1 1/4" 5/8" 2.54 OT310 1 5/8" 7/8" 4.17 OT314 2" 1" 5.93 GX5 PERSONAL SHREDDERS Crossed cut 0.16" x 1.18" Shreds 8.5 feet per minute Auto start/stop and reverse 70 db 13.80" W x 14.70" D x 15.38" H Not intended for CDs Cut Shredding No. Style Capacity Capacity /Each OM980 Straight cut 1/4" 5 sheets 2.6 gal. 44.00 Cut Shredding No. Style Capacity Capacity /Each OP297 Cross 19 sheets 9 gal. 471.00 Cut Shredding No. Style Capacity Capacity /Each OM981 Cross 5 sheets 3.7 gal. 73.20 SM12-08 MICRO CUT SMALL SHREDDERS Jam-free technology prevents paper jams before excess paper is caught in cutters Self clean cutters reduce buildup of shreds Quiet operation Shreds paperclips and staples Auto-shutdown conserves energy Colour: Black CATALOGUE PRICING The prices shown in this catalogue are for "REFERENCE AND BUDGET PURPOSES ONLY" as of July 2016, and should be used exclusively as a guideline. SPECIAL ORDERS This catalogue represents only a portion of the products that are available to you. If you can't find what you need, please call us! Cut Shredding No. Style Capacity Capacity /Each OP298 Micro 12 sheets 8 gal. 577.00 1580
IMPROMPTU MOBILE GARMENT RACKS Powder coated black sturdy steel frame Translucent polycarbonate panels Includes storage shelf above the rack for additional garments Holds up to 32 hangers, 12 hangers included Four casters, two locking 40 1/4" W x 58 3/4" H x 29 3/4" D ON740 GENERAL SUPPLIES SUGGESTION BOXES Locking suggestion box invites confidential ideas and comments Comes with 25 suggestion cards, two keys and front panel adhesive labels marked "Suggestions", "Comments" or "Key Drop" Set on tabletop or mount to any wall (hardware included) Suggestion card refill pack 25 cards/pack sold eparately model OE811 7 1/8" W x 6" D x 8 1/2" H, with a 4 3/4" x 1/8" deposit slot Black powder coat finish No. OE810 /Each $61.30 SUGGESTION CARDS, 25/PKG No. OE811 /Each $7.06 OE811 ON740 Mobile Garment Rack 421.00 ON741 Extra Hanger Pack, 12/Pack 76.50 COAT/HAT RACKS B. MODE TM WOOD WALL COAT RACKS WITH HANGERS Organization for garments Wood side panels, in black or mahogany are connected by 3 matte silver bars which provide an additional storage shelf Includes: 12 brushed chrome theft deterrent hangers and mounting hardware A. A. SHELF RACK WITH HANGERS Contemporary coat rack has 12 non-removable hangers; prevents loss or misplacement. Chrome finish. Mounting hardware included. No. Wt. Black Description lbs. /Each A. SHELF RACK WITH HANGERS OE017 49" W x 14" D x 19" H 13 113.00 B. & C. VALET COAT RACKS & HANGERS Available in plastic. Hangers are black finish Available in 12 coat capacities. Heavy gauge steel cons truc tion. Hangers included No. Wt. Black Description lbs. /Each B. HANGER OTJ331 Plastic, Black Finish, 12/Pack 3.6 45.20 C. VALET COAT HANGER OE831 12 Coat Valet 45 714.00 36" W x 15" D x 63" H D. STEEL COAT TREES All steel black coat tree, 63" high C. No. Finished Product Black Mahogany Description Dimensions /Each OJ997 OJ998 36" with hangers 37 1/2" W x 17 1/2" D x 13" H 161.00 OJ999 OK066 48" with hangers 49 1/2" W x 17 1/2" D x 13" H 178.00 BIOS TM STEP STOOL LADDERS Hand truck capacity: 132 lbs. Step stool capacity: 330 lbs. Aluminum ladder cart is ideal for home, office or store use Strong and lightweight aluminum construction Converts from a step stool into a hand truck Hand truck nose plate measures 15" wide Rolls on 4"diameter wheels No. Of steps: 3 Overall height: 38 1/2" Overall length: 20" Overall width: 18" No. MO009 Mfg. No. LF356 /Each $149.00 Wt. No. Description lbs. /Each OE843 Black 12 98.95 OK065 Chrome 12 98.95 D. 1581
LIGHTS VAMP TM LED LAMPS Multi-pivot flexible neck 7-step touch dimming function Warm or cool light settings USB port in the back of the base Aluminum and ABS plastic construction Overall dimensions: 16-3/4" H x 16" D x 5" W Lumens: 550 Mounting type: Flat base Bulb type: LED (Included) Lamp wattage: 9 W Mfg. No. No. Colour /Each XE743 1001SL Silver 114.00 XE744 1001WH White 114.00 DESK LAMP Adjustable head On/off switch Overall dimensions: 17" H x 17" L x 9" D Mounting type: Flat base Colour: Matte black Bulb type: Incandescent Lamp wattage: 100 W No. XE735 Mfg. No. HIL900-BK /Each $70.90 60W INCANDESCENT BULB No. XC559 Mfg. No. 7303 /Each $1.66 18 W ENERGY EFFICIENT FLEXIBLE DESK LAMP Gives equivalent light output to a 100 W incandescent Arm and head are uniquely flexible to allow for precise light placement Height 18" Base 6" x 9" Bulb: Max. 18 W mini fluorescent (DS 18 W included) No. XC792 Mfg. No. ULT118-BK /Each $178.00 13W CFL BULB No. XB913 Mfg. No. 29627 /Each $3.80 CLIP-ON GOOSENECK LAMPS Flexible, gooseneck arm Adjustable height Line switch on/off Overall dimensions: 19" H x 3" D Mounting type: Clamp Bulb type: Halogen Lamp wattage: 50 W Bulb not included VIVO TM LED LAMPS Energy-saving and economical Flexible neck LED flicker-free lights deliver a long-life Touch dimmer switch adjusts brightness V-Cut, anti-glare filters for more natural and bright light Memory button recalls last setting Free of lead, mercury and UV rays with zero pollution ABS plastic construction Overall dimensions: 15" H x 17-1/2" D x 4" W Base dimensions: 4" W x 5" D Lumens: 1300 Mounting type: Flat base Bulb type: LED (Included) Lamp wattage: 11 W Mfg. No. No. Colour /Each XE739 1000BL Black 176.00 XE740 1000CG Champagne 176.00 XE741 1000RD Red 176.00 XE742 1000WH White 176.00 DUAL MOUNT EXTENDED REACH DESK LAMPS Gives equivalent light output to a 75 W incandescent Complete with heavy base and table clamp Arm extends approximately 36" Height: 43" Oval base: 7.5" x 9" Uses CFL bulbs (not included) Mfg. No. XC793 ULT260-BK Black 138.00 XB913 CF13EL Replacement Bulb 13 W Mini 3.80 SWING ARM CLAMP-ON DESK LAMPS Spring arm adjusts to many positions 36" reach Clamp to any surface Durable baked enamel finish Uses CFL bulbs (not included) Mfg. No. XE733 DGU16-OBB Brushed Bronze 89.10 XE734 DGU16-SC Satin Chrome 89.10 XC568 B7462 50 W Halogen Lamp 2.68 Frame No. Colour Light Type /Each XA982 Black 23 W CFL 57.60 XA983 White 23 W CFL 57.30 XC552-23 W Replacement Bulb - 13.40 1582
GENERAL SUPPLIES KITCHEN SUPPLIES OD030 - OD031 OD034 OE809 SERVRITE NORTH RIVER NAPKINS A favourite with fast-food establishments As each napkin is dispensed the next one is pulled in to place No cross-contamination you only touch the napkin you use 100% recycled paper A strong, absorbent high quality napkin Certified Processed Chlorine Free and UL ECOLOGO 175 and Green Seal certified Endorsed by the Green Restaurant Association JC013 OD039 OD030 Styrofoam cups 7 oz capacity, 1000/pkg 25.80 OD031 Covers for 7 oz cups, 1000/pkg 30.20 OD032 Styrofoam cups 9 oz capacity, 1000/pkg 64.70 ON910 Covers for 8 oz or 9 oz cups, 1000/pkg 37.70 OD034 Paper cups, conical, 4 oz cap. 200/pkg 3.38 OK074 Plastic cups, clear, 7 oz cap. 2000/pkg 126.00 OK075 Plastic cups, clear, 10 oz cap. 1500/pkg 166.00 OE809 Paper cup, dispenser, stainless steel 60.90 OD039 Plastic plate 6", 125/pkg 10.50 OD040 Plastic plate 9", 125/pkg 22.60 OE063 Plastic forks, 1000/box 27.10 OE064 Plastic knives, 1000/box 26.30 OE065 Plastic spoons, 1000/box 28.00 OD045 Plastic teaspoons, 1000/box 28.10 OK076 Cutlery sets (incl. knife, fork, salt, pepper, napkin), 500/case 47.90 OK078 Foam plate 9", 500/case 31.80 OK079 Paper plate 9", 1200/case 53.00 OK080 Sugar packets, 2000/case 41.30 STRAWS 8" standard 500/box No. OD038 /Each $5.31 OE063 OE064 OE065 FILM Multipurpose, comes in a practical dispenser box 11" x 2500' roll No. OD048 /Each $22.70 Mfg. Ply Open Size Folded Size Napkins Dispenser No. No. Colour Ply Type L" x W" L" x W" /Case Options /Case JC013 2733 Mocha 1 Full Emboss 13 x 12 5 x 6.5 6000 JC015 81.90 JC014 2629 White 1 Full Emboss 13 x 12 5 x 6.5 6000 JC015 85.50 SERVRITE DISPENSERS Constructed of ABS plastic, will not scratch or dent Designed for controlled distribution, therefore reducing waste The next napkin is pulled into position as each napkin is dispensed Hygienic, you only touch the napkin you use Allows up to 600 napkins Modern Smoke/Black dispenser fits with any décor Mfg. Dimensions Paper No. No. L" x W" x H" Options /Each JC015 2576 8 x 7.25 x 15.75 JC013, JC014 44.20 UNIVERSAL ROLL TOWELS Long-lasting rolls minimize maintenance costs while maximizing service Embossing enhances hand feel and maximizes absorbency; fewer towels are used per hand dry UL ECOLOGO 175 certified, Green Seal certified, and Chlorine Free JC030 JC031 ALUMINUM FOIL Practical Dispenser Box 18" x 328' roll No. OD050 /Each $37.50 COFFEE STIR STICKS OD036 Coffee Stir Sticks, 4 1/2" Plastic, 1000/Box 3.62 OD037 Coffee Stir Sticks, Wood, 1000/Box 7.97 GLASS DECANTERS OB828 Glass Decanter 15.20 OK077 Filters 1000/pkg. 15.00 OD036 OB828 Mfg. Dimensions Rolls Dispenser No. No. Colour Brand Ply L' x W" /Case Option /Case JC027 101756 Natural Décor 1 205 x 8 24 JC102 34.00 JC028 1340 Ivory North River 1 700 x 8 6 JC102 54.90 JC029 1767 Natural Décor 1 425 x 8 12 JC102 40.40 JC030 1769 White Décor 1 425 x 8 12 JC102 41.80 JC031 1870 Mocha North River 1 700 x 8 6 JC102 49.90 JC055 1760 Kraft Décor 1 800 x 8 6 JC102 41.70 JC056 1762 White Décor 1 800 x 8 6 JC102 41.40 UNIVERSAL ROLL TOWEL DISPENSERS See-through construction allows quick and easy service checks High capacity reduces labour and maintenance costs No touch models help to control germs and reduce risks of cross-contamination SEE PAGE 340 FOR MORE DISPENSERS Mfg. Dimensions Paper No. No. Colour Description L" x W" x H" Options /Each JC102 1137 Grey Roll towel 13 x 9.75 x 15.75 JC027, JC028, JC029, 63.60 dispenser JC030, JC031, JC055, JC056 1583
GENERAL SUPPLIES ONYX TM ORGANIZERS COFFEE POD SUPPLIES ORGANIZERS Durable steel wire mesh Removable dividers organize coffee pods, silverware, napkins, condiments, etc. Ideal in break rooms, conference spaces, etc. Fits K-Cup and other single serve beverage pods s OP406 and OP408: Store up to 25 beverage pods OP406 OP407 OP408 Mfg. Dimensions No. No. Description W" x D" x H" /Each OP406 3274BL Single Drawer 12 1/2 x 11 1/4 x 3 1/4 35.30 OP407 3275BL Triple Drawer 11 1/2 x 8 1/4 x 8 1/4 53.90 OP408 3276BL Stand-Up 8 1/4 x 11 1/2 x 10 1/2 26.50 TOWER BREAK ROOM ORGANIZERS Overall dimensions: 6" W x 6" D x 18" H For easy storage and organization Unique metal mesh design allows for easy visibility of contents Fits into any workspace setting, from your break room to conference area Features three storage compartments Two metal, wire handles at the top for easy carrying Metal label holders for easy identification (labels included) Ample storage space for supplies and essentials No. OP409 Mfg. No. 3290BL /Each $48.60 COMPACT REFRIGERATORS Danby's large capacity, classic compact fridges offer plenty of additional refrigeration in a compact footprint. Suitable for offices, dens and workshops, this 4.4 cu. ft. model includes Danby's patented Canstor beverage dispenser, full width freezer section and tall bottle storage. Large 4.4 cu.ft. capacity compact fridge Mechanical thermostat Make ice or store frozen items in the compact freezer section No hassle push button defrost Convenient Canstor beverage dispensing system 2.5 wire shelves for maximum storage versatility Tall bottle storage - great for large soda bottles Reversible door swing for convenient left or right hand opening Integrated door handle Smooth back design 20 1/2" W x 21 1/16" D x 32 11/16" H Weight: 68.34 lbs. OE400 White 503.00 OM293 Black w/stainless Steel 534.00 1000W COMMERCIAL MICROWAVE OVENS Ceramic bottom for durability and easy cleaning 1-touch keypad Bright backlit LCD display Features 3 power levels and 10 programmable settings Door Style: Pull Handle Warranty: 12 months CONDIMENT CARTON ORGANIZERS Overall dimensions: 16" W x 8-1/2" D x 5-1/4" H For easy storage and organization Unique metal mesh design allows for easy visibility of contents Fits into any workspace setting, from your break room to conference area Features seven compartments, with six equal sized and one larger compartment Metal label holders for easy identification (labels included) Ample storage space for supplies and essentials No. OP410 Mfg. No. 3291BL /Each $48.60 CUP & LID HOLDER ORGANIZERS Overall dimensions: 12-3/4" W x 4-1/2" D x 13-1/4" H For easy storage and organization Unique metal mesh design allows for easy visibility of contents Fits into any workspace setting, from your break room to conference area Features three compartments to store coffee cups, lids and drinking cups Two metal, wire handles at the top for easy carrying Metal label holders for easy identification (labels included) Ample storage space for supplies and essentials No. OP411 Mfg. No. 3292BL /Each $66.30 Mfg. Capacity Dimensions No. No. Wattage Colour Cu.Ft. W" x D" x H" /Each OP521 RCMW1000-25SS 1000 Gray 0.9 20-1/2 x 18 x 12-1/5 429.00 1000W MICROWAVE OVENS Includes 10 power levels and 6 automatic cooking menus Includes a 18 month warranty Wattage: 1000 W OP451 Mfg. Door Capacity Dimensions No. No. Style Colour Cu.Ft. W" x D" x H" /Each OP451 191700 Pull Handle White 1.1 21-1/5 x 16-7/10 x 11-4/5 179.00 OP452 191692 Push Button Black/Stainless Steel 1.1 21-1/5 x 15-9/10 x 11-4/5 185.00 1584
WATER COOLERS OASIS WATER COOLERS Oasis water coolers are manufactured with a heavy gauge steel frame which provides durable and quiet operation. They feature a 5-year limited warranty on the sealed refri geration system and most component parts. All waterways are constructed of lead free materials and HFC 134A is used as a refrigerant. No CFCs are used. All units are standard tan sandstone finish. Drinking water temperature is 50 F/10 C. Certified for sale in Canada by an accredited certification body. WALL-MOUNTED COOLERS These units come in standard or compact models. All units are shipped with complete instructions and wall mounting brackets. Units should be installed with the nozzle 36 inches from the floor. Mfg. GPH Dimensions Wt. No. No. Description Capacity W" x D" x H" lbs. /Each OJ952 PLF4CM Compact 4 17 x 13 3/16 x 16 51 1461.00 OA061 P8M Standard 8 17 x 29 7/8 x 14 73 1430.00 OA536 P14M Standard 14 17 x 29 7/8 x 14 76 2208.00 OA061 FREE-STANDING COOLERS COMPACT FREE-STANDING Attractive economical line suitable for applications in offices, shops or factories where space saving is critical. Mfg. GPH Dimensions Wt. No. No. Description Capacity W" x D" x H" lbs. /Each OA063 P3CP Compact 3 12 x 12 x 43 3/4 66 1210.00 OA064 P5CP Compact 5 12 x 12 x 43 3/4 69 1257.00 OA548 P10CP Compact 10 12 x 12 x 43 3/4 73 1363.00 AGAINST-A-WALL OR FREE-STANDING COOLERS All plumbing connections are completely sealed within the cabinet, permitting flush-to-wall installation. OA063 Mfg. GPH Dimensions Wt. No. No. Description Capacity W" x D" x H" lbs. /Each OC709 P8FA Standard 8 17 x 14 x 43 3/4 94 1449.00 OA550 P14FA Standard 14 17 x 14 x 43 3/4 96 2204.00 OC709 BARRIER FREE WHEELCHAIR COOLERS Designed specifically for easy access Wheelchairs fit under edge of water basin for comfort and convenience Instructions and wall mounting brackets included Drinking water temperature is 50 F/10 C 17 1/2 W" x 18 1/2 D" x 22 11/32 H" Mfg. Bubbler Valve GPH No. No. Type Cap. /Each OA059 P8AC 3 Electric Push Bars 7.8 960.00 OA059 DRINKING WATER FILTERS FOR OASIS COOLERS Removes dirt, cloudiness, particles, unpleasant odours and taste Reduces chlorine by 97 %, lead between 95.9 % and 99 % and cryptosporidium and giardia cysts by 99.99 % Works with all the Oasis water coolers listed on this page Includes brackets, complete filter and colour coded waterline connections Fast and easy-to-change refill cartridges with automatic shut-off valve inside the filter Designed to last 1500 gallons or approximately six months OG445 OG445 Filter 289.00 OG446 Refill Cartridge 148.00 1585
WATER COOLERS VERSAFILLER TM WATER FOUNTAIN & BOTTLE FILLERS Enjoy the best of both water options; refreshing fountain water and a bottle filler unit for refillable bottles. The VersaFiller TM accomplishes both tasks with ease and simplicity, and puts your location at the top of the refillable bottle trend while making a bold statement about your concern for the environment. The VersaFiller TM is also designed for the future. The alcove and activation button contain Freshield TM, which utilizes a silver-based antimicrobial compound. This is ideal for work-place settings, schools, university locations, and any public building. The VersaFiller TM unit is available in two configurations. The ON557 (PWSBF) model can be retrofitted to existing OA059 (P8AC) coolers as well as Elkay's EZ8 models (some installation is required to connect this unit to existing P8AC models) providing an instant upgrade to those products already in the field. Th e ON557 (PWSBF) is also designed for simplicity of installation, requiring only water tubing connection to the host (P8), with no required electrical connections or separate drains. The VersaFiller TM can be purchased as a complete top and bottom combination as well, ON555 or ON556. ON556 STANDARD FEATURES: Waterways are lead-free in materials and construction Heavy-duty galvanized steel frame bolts directly to the wall Freshield TM antimicrobial compound Gauges: Panels: 22, frame: 16 ADA compliant for adult or child when properly installed Certified to NSF/ANSI Standard 61, Annex G (AB1953) 5-year limited warranty Mfg. Capacity Dimensions Weight No. No. Description GPH W" x D" x H" lbs. /Each ON555 P8SBF VersaFiller TM Combo Complete w/oa059, Sandstone Finish 8 24 x 36 x 24 74 1732.00 ON556 P8SBF VersaFiller TM Combo Complete w/oa059, Stainless Finish 8 24 x 36 x 24 74 1836.00 ON557 N/A VersaFiller TM Retrofit Kit for OA059, Fountain Only (See page 1585 for OA059) N/A 6 x 18 x 12 10 773.00 REPLACEMENT FILTER CARTRIDGES Single Action (Dirt/Rust) - hot and cold water filters are made of pure white cellulose fibres. 1" centre hole. Double Action (Taste/Odour, Dirt/Rust) - cold water only filter made of pure white cellulose fibres with activated carbon granules. For normal contamination. 1" centre hole. Double Action (Scale, Dirt/Rust) - uses annular grooves and the graded density cellulose of the Dirt/Rust cartridges plus a compound to inhibit scale. Extends the life of pipes, fixtures and appliances. Cold water only. 1" centre hole. INDUSTRIAL WATER COOLERS Heavy-duty blow molded resin resists chips and dents in the toughest work area or job site Injection grade insulated liner material keeps your water or beverage cold Leak-resistant screw on lid Drip-resistant spigot Sturdy molded-in handles on the 10-gallon cooler Universal cup dispenser is available for 3-gallons and up, holds 200 cups NI653 BA590 BA592 BA593 BA591 Flow/Rate/ Filter Maximum Cartridge Dim Degree of Rating No. Type Temperature (GPM) H" x Dia" Filtration Microns /Each BA590 Single (Dirt/Rust) 210 F (99 C) 6 9 3/4 x 2 5/8 Normal 5 15.80 BA591 Single (Dirt/Rust) 210 F (99 C) 6 9 3/4 x 2 5/8 Heavy 50 13.10 BA592 Double 100 F (38 C) 3 9 3/4 x 3 Normal 5 27.10 (Taste/Odour, Dirt/Rust) BA593 Double 100 F (38 C) 8 9 3/4 x 2 15/16 Normal 5 227.00 (Scale, Dirt/Rust) ICE MAKER WATER FILTERS Triple action filtration provides sparkling clear ice cubes, fresh tasting water, coffee and beverages Protects equipment from scale and corrosion, reducing maintenance costs Effective taste, odor, chlorine removal Filters particulates as small as 5 microns 1/4" NPT connections, 1/2 GPM flow rate maximum Dimensions Max. Water Max. Water No. H" x Dia." Capacity Temperature Pressure /Each BA609 8 3/8 x 2 1/4 1500 gal. 100 F (38 C) 125 PSI 57.90 1586 BA609 No. Description Wt. lbs. /Each NI653 3 Gallons 5.4 65.00 ON611 5 Gallons 7.5 57.00 ON607 5 Gallons w/dispenser 7.5 59.40 NI656 10 Gallons 10.9 127.00 NI657 Universal Cup Dispenser 0.82 29.20 UNDER-SINK WATER FILTERS Compact 2 GPM cold water filter Filter included Maximum water temperature 100 F (38 C) 125 PSI Inlet/outlet size: 3/8" NPT BA605 Dimensions Filter Wt. No. H" x Dia." Type Filter # lbs. /Each DIRT/RUST BA605 8 13/16 x 4 7/8 Taste/Odour BA607 2 3/4 210.00 BA606 11 1/16 x 3 3/8 Taste/Odour, Scale BA608 4 237.00 REPLACEMENT FILTER CARTRIDGES For Use No. Description with Housing /Each BA607 Taste/Odour, Dirt/Rust BA605 38.00 BA608 Taste/Odour, Dirt/Rust BA606 104.00