New Demag DR-Bas rope hoist Now up to 50t The right choice High quality and excellent value
Demag DR-Bas rope hoist Are you looking for a reliable, high-performing and compact rope hoist with a lifting capacity of up to 50 tons? Then the Demag DR-Bas rope hoist is the right choice for you. 40763 It is distinguished by its excellent value. This is achieved through its long service life, comprehensive standard equipment and high performance. The modular design of the rope hoist allows quick and easy maintenance and servicing of individual components further reducing operating costs. Your benefits Safe and durable Functional and reliable Tough and robust Economical to run Simple to operate Easy to maintain We leverage our deep expertise and customer knowledge to ensure our products seamlessly integrate into our customer s value creation process. World-class project support and technical expertise helps drive the safety, reliability and long service life of your DR-Bas rope hoist. You profit from a powerful partner at your side, with almost 660,000 Demag cranes and hoists installed all over the world, Terex Material Handling has the largest installed base worldwide. HOIST MANUFACTURERS INSTITUTE 02
Highly cost-effective thanks to long service life and reduced maintenance needs 40209-1
The right choice: For your application The DR-Bas rope hoist is perfect for all applications as it s offered in several different configurations: four models, three sizes, three hooks paths and six speeds. Plus, by leveraging standard modular components, maintenance is quicker and more cost-effective. 40767 Your benefits High safety level in everyday operation thanks to integrated drop stop Safe and easy operation with ergonomically designed control pendant Certified safety through ccsaus approval Excellent side approach dimensions thanks to compact design Long service life thanks to robust gearbox Minimal running noise and low-wear running thanks to universal travel wheels and guide rollers Precise positioning with two-speed cross travel Quick and easy installation thanks to variable trolley adjustment for large flange widths 40260-4 40767 04
For standard configurations to fit your needs up to 50 tons 40650-2 EKDR-BAS MONORAIL HOIST The perfect hoist for single-girder cranes up to 12.5 t Extremely compact headroom dimension C for maximum lifting height Directly driven travel wheel (maintenance-free, lubricated for life) Flangeless travel wheels for quiet and low-wear travel Optionally with thrust rocker or counterweights 40652-1 EZDR-Bas double girder Trolley Engineered for double-girder cranes up to 12.5 t Two directly driven travel wheels for extra safe and precise travel Drive unit with proven Demag geared motor for long service life Standard trolley gauges for EZDR Bas 3/5/10: 1400 mm (55.1 ), 2240 mm (88.2 ), & 2800 mm (110.2 ) for box girders and 1588 mm (62.5 ) & 1808 mm (71.2 ) for beam girders 41062 EZDr-Bas 20 double girder trolley Safe handling of loads weighing up to 50 t Compact design for minimum approach dimensions Particularly favorable headroom dimension EZDR-Bas Trolley Travel Speed: 25/6.3 m/min (100/25 FPM) Load capacities up to 50 t Now up to 50t 40653-1 FDR-Bas foot-mounted hoist The versatile solution for non-standard lifting applications up to 50 t Stationary type for many installation positions Direct integration in prepared steel structures or special trolleys Can be used in different mounting positions with various rope lead-off directions Can be attached on three sides Now up to 50t safe: Precisely engineered for maximum system safety economical: Long service life, high availability flexible: Versatile in application with many combinations, sizes and variants long service life: Service-friendly, robust components 05
DR-Bas rope hoist technology 40600-29 40201-12 40950-1 40951-2 Hoist motor Rugged 12 / 2-pole cylindrical-rotor motor Low-vibration, quiet running characteristics Thermal contacts to protect against overheating Designed for extended operating periods, classified in accordance with FEM IP 55 enclosure Brake DC disk brake with brake release monitoring Minimum safety factor of 1.8 Rapid response through integrated brake module Rope drum and guide Generously dimensioned drum for long rope service life Precisely machined rope grooves Rope guide made of heavy duty composite material Reliable operation even in critical environments: Rope lead-in via hardened metal pressure rollers mounted on anti-friction bearings Rope fleet angle up to +/- 4 without physical contact between rope and rope guide. Control system Conventional contactor control Two-speed cross travel Electronic module for control of time functions Overload protection fitted as standard for increased safety Control by means of DST control pendant: Ergonomic and rugged design with 7 or 9 buttons Emergency Off switch fitted as standard 06
39780 40606-14 Gearbox Three stage, helical gear reducer Low running noise Lubricated for life Precision geared limit switch for reliable hoist cut-off at the limit positions Bottom block Ergonomically designed and operator friendly Easy guidance with one hand and two grip recesses for simple handling DR-Bas ROPE HOIST: TECHNICAL DATA Range DR-Bas 3 DR-Bas 5 DR-Bas 10 DR-Bas 20 Load capacity [t]* Hook path [m] [ft] Lifting speed [m / min] [FPM] Group of mechanisms FEM/ISO Load capacity [t]* Hook path [m] [ft] Lifting speed [m / min] [FPM] Reeving 2 / 1 Reeving 4 / 1 1.0 12 39 4m / M7 2.0 6 20 1.25 14.5 / 2.4 48/8.0 3m / M6 2.5 7.2/1.2 24/4 20 65 10 32 1.6 2m / M5 3.2 2.0 30 98 12/1.9 40/6.4 1Am / M4 4.0 15 49 6/1 20/3.2 Reeving 2 / 1 Reeving 4 / 1 1.6 12 39 4m / M7 3.2 6 20 2.0 14.5 / 2.4 48/8.0 3m / M6 4.0 7.2/1.2 24/4 20 65 10 32 2.5 2m / M5 5.0 3.2 30 98 12/1.9 40/6.4 1Am / M4 6.3 15 49 6/1 20/3.2 Reeving 2 / 1 Reeving 4 / 1 3.2 12 39 4m / M7 6.3 6 20 4.0 12/1.9 40/6.4 3m / M6 8.0 6/1 20/3.2 20 65 10 32 5.0 2m / M5 10.0 6.3 30 98 9.6 /1.45 32/4.8 1Am / M4 12.5 15 49 4.8 / 0.7 16/2.4 Reeving 2/1 Reeving 4/1 6.3 20 65 12/2 40/6.5 4m / M7 12.5 10 32 6/1 20/3.2 8 14.5/2.4 48/8.0 3m / M6 16 7.2/1.2 24/4 10 30 98 18/3 59/10 2m / M5 20 15 49 9/1.6 30/5.2 40 130 9.6/1.6 32/5.2 20 65 4.8/0.7 16/2.4 12.5 12/2 40/6.5 1Am / M4 25 6/1 20/3.2 54 177 27 88 14.5/2.4 48/8.0 7.2/1.2 24/4 Reeving 6/1 Reeving 8/1 20 6.7 22 4/0.7 13/2.3 4m / M7 25 7.5 24 3/0.5 10/1.6 25 4.8/0.85 25.7/2.8 3m / M6 32 3.6/0.6 12/2 10 30 32 6/1 20/3.3 2m / M5 40 10 32 4.6/0.7 15/2.3 13.3 43 40 3.15/0.6 11/2 13.5 44 2.4/0.4 8/1.3 18 59 4/0.7 13/2.3 1Am / M4 50 3/0.5 10/1.6 28 92 21 69 4.8/0.85 15.7/2.8 3.6/0.6 12/2 Cross-travel speed with 60 Hz EKDR-Bas 3-10: 6/24 m/min (80/20 FPM) Inverter control 6-24 m/min (20-80 FPM) EZDR-Bas 3-20: 7/30 m/min (100/25 FPM) Inverter control 7-30 m/min (25-100 FPM) Flange width range: EKDR-Bas 3 and 5 = 110-400 mm (4.3-15.7 in) EKDR-Bas 10 = 116-400 mm (4.6-15.7 in.) Operating voltage: 460-480 volts [60 Hz] 575 volts [60 Hz] Control voltage: 120 volts DR-Bas 3-20 IP 55 enclosure EZDR-Bas standard track widths of 1,400 mm (55.1 in.), 2,240 mm (88.2 in.), 2,800 mm (110 in.) and 3,550 mm (140 in.) * All mentions of tons refer to metric tons 07
terex MAteriAL HAnDLing terex MHps gmbh is one of the world s leading suppliers of crane technology with Demag industrial cranes and crane components. the core competence of the terex Material Handling business group lies in the development, design and production of technically sophisticated cranes, hoists and components and the provision of sales support and services for these products. terex Material Handling & port solutions manufactures at 19 locations on five continents and is present to reach its customers in more than 60 countries. terex MHPS corp. 29201 Aurora Road Cleveland, OH 44139-1895 Distributed by Tri-State Equipment Company Inc. Email: sales@tsoverheadcrane.com Web: www.tsoverheadcrane.com PH: 314-869-7200 FAX: 314-869-7226 0214 EN/US 229 160 49 DE 701 IS 152 Subject to change. Not liable for errors or omissions.