ENGEL e-motion TL All-electric, tie-bar-less be the first.
ENGEL e-motion TL generously dimensioned, barrier-free mould mounting surface excellent platen parallelism encapsulated toggle levers perfect clamping force distribution ENGEL e-motion TL high level of process reliability short cycle times compact design low maintenance costs The smaller the parts, the higher the quality and precision requirements The new ENGEL e-motion TL defines a new standard in the manufacturing of very small precision parts. It is the carefully considered combination of the flexible, all-electric ENGEL e-motion machine solution with the proven ENGEL tie-bar-less design. Its perfect platen parallelism and excellent dynamic thus give you the answers to fast and trouble-free production from complex micro-connectors through to optical parts in cleanroom quality. ENGEL e-motion TL_3
ENGEL e-motion TL ENGEL e-motion TL generously dimensioned, barrier-free mould mounting surface More flexibility thanks to proven ENGEL tie-bar-less design: the ENGEL e-motion TL's innovative frame concept gives you optimum access to the mould area while offering a generously dimensioned mould mounting surface. Your benefits: thanks to its compact, lightweight design, the ENGEL e-motion TL can be deployed wherever needed with optimum results. excellent platen parallelism At ENGEL, platen parallelism is not just the sum of all manufacturing tolerances, as is the case with conventional machines: the ENGEL e-motion TL's is precisely set up prior to delivery using high-precision platen parallelism adjustment system. This enables retroactive adjustment later on, thus ensuring a long service life of both the machine and the mould. encapsulated toggle levers Production to cleanroom standards: ENGEL's patented toggle lever sealings ensure that no oil whatsoever can escape from the high quality bushings. All lubrication points are supplied simultaneously via metering elements, while the oil pressure is continually monitored. perfect clamping force distribution Minimal tolerances, maximum output: FEM-designed mould mounting platens guarantee perfect clamping force distribution (max. deviation 2%). Highest precision and fewer rejects guaranteed for highly sensitive components such as lenses for cell phone cameras. compact design Space-saving production with machines up to two clamping force classes lower: the new ENGEL e-motion TL makes this possible thanks to ENGEL's proven tie-bar-less technology. The generously dimensioned mould mounting surface gives you the ability to install larger moulds on this compact machine. And thanks to the smaller footprint, you can save valuable floor space. low maintenance costs Long service life thanks to optimized lubrication: the ENGEL e-motion TL features permanent oil bath lubrication of the ball screw spindles. This guarantees constant lubrication conditions and removes the need for separate oil cooling. Your benefits: one oil change per year is absolutely sufficient. high level of process reliability Perfect control for dynamic injection processes: in the case of the ENGEL e-motion TL, all relevant positions are measured via the encoders on the servo-motors (repeat accuracy +/- 0.01 ). Injection, holding and back pressure measuring is handled via a pressure diaphragm directly connected to the screw. The maintenance-free pressure sensor also impresses with its high resolution and durability. ENGEL e-motion TL_5
ENGEL e-motion 30TL ENGEL e-motion 30TL Clamping force tonnes/kn 30 / 300 Opening stroke 230 Mould installation height 150 330 Mould mounting platen h x v 440 x 420 Delivery chute width 320 Ejector stroke 75 Ejector force kn 10 Max. mould weight moving platen kg 230 Dry cycle time sec/ 0.9 / 200 ENGEL e-motion 30TL 50 Standard High Premium Screw diameter 15 / 18 / 20 15 / 18 / 20 15 / 18 Plasticizing stroke 80 80 80 Max. injection capacity cm 3 14.1 / 20.4 / 25.1 14.1 / 20.4 / 25.1 14.1 / 20.4 Screw speed rpm Screw torque Nm 45 / 75 / 120 45 / 75 / 120 45 / 75 / 120 L/D screw length L/D 24 24 24 Plasticizing capacity g/sec 2.8 / 4.2 / 6.0 2.8 / 4.2 / 6.0 2.8 / 4.2 Injection rate cm 3 /sec 58 / 84 / 104 88 / 127 / 157 141 / 204 Spec. injection pressure bar 2 / 2 / 2000 2 / 2 / 2000 2 / 2 Max. holding pressure bar 2160 / 2160 / 1800 2160 / 2160 / 1800 2160 / 2160 Nozzle stroke 200 200 200 Nozzle contact force kn 20 20 20 6_ENGEL e-motion TL ENGEL e-motion TL_7
ENGEL e-motion 50TL ENGEL e-motion 50TL Clamping force tonnes/kn 50 / 500 Opening stroke 270 Mould installation height 350 Mould mounting platen h x v 550 x 500 Delivery chute width Ejector stroke 75 Ejector force kn 20 Max. mould weight moving platen kg 350 / 120 Dry cycle time sec/ 0.9 / 200 ENGEL e-motion 50TL 50 Standard High Premium Standard High Premium Screw diameter 15 / 18 / 20 15 / 18 / 20 15 / 18 22 / 25 / 30 22 / 25 / 30 22 / 25 / 30 Plasticizing stroke 80 80 80 120 120 120 Max. injection capacity cm 3 14.1 / 20.4 / 25.1 14.1 / 20.4 / 25.1 14.1 / 20.4 46 / 59 / 85 46 / 59 / 85 46 / 59 / 85 Screw speed rpm Screw torque Nm 45 / 75 / 120 45 / 75 / 120 45 / 75 / 120 171 / 230 / 300 171 / 230 / 300 171 / 230 / 300 L/D screw length L/D 24 24 24 24 / 24.8 / 20.5 24 / 24.8 / 20.5 24 / 24.8 / 20.5 Plasticizing capacity g/sec 2.8 / 4.2 / 6.0 2.8 / 4.2 / 6.0 2.8 / 4.2 6.4 / 10 / 14.2 6.4 / 10 / 14.2 6.4 / 10 / 14.2 Injection rate cm 3 /sec 58 / 84 / 104 88 / 127 / 157 141 / 204 84 / 109 / 157 126 / 163 / 235 171 / 221 / 318 Spec. injection pressure bar 2 / 2 / 2000 2 / 2 / 2000 Max. holding pressure bar 2160 / 2160 / 1800 2160 / 2160 / 1800 Nozzle stroke 200 200 200 Nozzle contact force kn 20 20 20 170 8_ENGEL e-motion TL ENGEL e-motion TL_9
ENGEL e-motion 80TL ENGEL e-motion 80TL ENGEL e-motion 80TL 170 50 310 Standard High Premium Standard High Premium Standard High Premium Screw diameter 15 / 18 / 20 15 / 18 / 20 15 / 18 22 / 25 / 30 22 / 25 / 30 22 / 25 / 30 30 / 35 30 / 35 30 / 35 Plasticizing stroke 80 80 80 120 120 120 160 160 160 Max. injection capacity cm 14.1 / 20.4 46 / 59 / 85 46 / 59 / 85 46 / 59 / 85 113 / 154 113 / 154 113 / 154 Screw speed rpm 420 420 420 Screw torque Nm 45 / 75 / 120 45 / 75 / 120 100 L/D screw length L/D 24 24 24 23.6 / 20 23.6 / 20 23.6 / 20 Ejector force kn 40 g/sec 2.8 / 4.2 / 6.0 2.8 / 4.2 / 6.0 2.8 / 4.2 6.4 / 10 / 14.2 Max. mould weight moving platen kg 570 / 133 Injection rate cm /sec 58 / 84 / 104 88 / 127 / 157 141 / 204 84 / 109 / 157 sec/ 1.2 / 320 Spec. injection pressure Clamping force tonnes/kn Opening stroke Mould installation height Mould mounting platen h x v 670 x 600 Delivery chute width Ejector stroke Dry cycle time 80 / 800 Plasticizing capacity 3 14.1 / 20.4 / 25.1 14.1 / 20.4 / 25.1 bar 45 / 75 / 120 171 / 230 / 300 171 / 230 / 300 171 / 230 / 300 24 / 24.8 / 20.5 24 / 24.8 / 20.5 24 / 24.8 / 20.5 2 / 2 / 2000 6.4 / 10 / 14.2 6.4 / 10 / 14.2 126 / 163 / 235 171 / 221 / 318 15.0 / 21.9 15.0 / 21.9 15.0 / 21.9 157 / 214 2 / 2 / 2000 2160 / 2160 / 1800 235 / 320 442 / 601 2 / 2000 Max. holding pressure bar Nozzle stroke 200 200 200 kn 20 20 20 Nozzle contact force 10_ENGEL e-motion TL 3 2160 / 2160 / 1800 2160 / 1800 _11 ENGEL e-motion TL
EN 2015-11 ENGEL e-motion TL be the first.