- and 3-Pole, Non-Interchangeable Trip. Bolted Enclosure Type. Class I, Division 1 and, Groups B, C, D Class II, Division 1 and, Groups E, F, G Distribution Equipment NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION CIRCUIT BREAKERS Application Explosionproof circuit breaker enclosures are used where hazardous materials are handled or stored. These units are used for overload and short circuit protection, control of lighting and power circuits. Features Precision machined flame path between box and cover. Bolt on stainless steel slotted mounting feet. Stainless steel, captive Quad-Lead cover bolts are standard (disengaged in 1-1/ turns). Ground lug package and installation instructions for termination of ground wire enclosed. External operating handle with stops for limiting handle travel. Breaker operators can be locked in the ON or OFF position (up to 3 padlocks). External flange maximizes internal space. Standard outlets top and bottom for line and load wiring. Plugged 1/ outlets top and bottom for breather and drain. Breakers mounted on a galvanized steel removable pan. Enclosures are designed to accept GE, Square D and Cutler-Hammer circuit breakers. O-ring gasket insures watertight integrity. - and 3-pole versions are standard. For 4-pole versions, contact your local representative. For 65,000 AIC ratings contact your local representative. Standard Materials Bodies and covers: copperfree (4/10 of 1% max.) aluminum Cover bolts, hinges, breaker and operator shafts: stainless steel Hinges: stainless steel O-ring: neoprene Standard Finishes Bodies and covers: gray epoxy powder coat inside and outside standard Options Must be listed in alphanumeric sequence at the end of the catalog number. Auxiliary switch (1A or 1B), add suffix AS1. Auxiliary switch (A or B), add suffix AS. Breather, NEMA 4X (includes outlet and installation), add suffix BR. Drain, NEMA 4X (includes outlet and installation), add suffix DN. External grounding stud, add suffix EGS. Plastic nameplate, x 4, 1/8 black letters on white surface, 3 lines max, specify legend, add suffix NP. Shunt trip (specify voltage), add suffix ST. Under voltage release (specify voltage), add suffix UV. For +50 C (+1 F) breaker rating, add suffix V. For 65,000 AIC rating, contact your local sales representative. NEC Certifications and Compliances UL Standard: UL 103 UL Listed: E84577 CSA Standard: C. No. 5, C. No. 30, C. No. 5.1 CSA Certified: 05308 GE is a registered trademark of General Electric Company. Square D is a registered trademark of Schneider Electric. Cutler-Hammer is a registered trademark of Eaton Corporation. 108 Visit our website at www.appletonelec.com or contact us at (800) 61-1506. May 014
- and 3-Pole, Non-Interchangeable Trip. Bolted Enclosure Type. Class I, Division 1 and, Groups B, C, D Class II, Division 1 and, Groups E, F, G Catalog Numbering Guide A E A B 1 3 15 C Appleton Enclosure Type: B - Bolted Line Voltage: - 40 4-480 6-600 Suffix for Other Options/Features: Must be listed in alphanumeric sequence (See Options) E - Explosionproof Enclosure Size: A - 15-50 AT B - 60-100AT C - 15-150AT E - 175-5AT F - 50-400AT D - 400-600AT L - 700-800AT G - 1000-100AT Breaker Frame: 1-100-150AF - 50AF 4-400AF 6-600AF 8-800AF 1-100AF Number of Poles: 3-3 Pole 4-4 Pole (Contact your local representative) Breaker Trip: 15-15AT 0-0AT 5-5AT 30-30AT 35-35AT 40-40AT 50-50AT 60-60AT 70-70AT 80-80AT 90-90AT 10-100AT 1-15AT 15-150AT 17-175AT 0-00AT - 5AT 5-50AT 30-300AT 35-350AT 40-400AT 45-450AT 50-500AT 60-600AT 70-700AT 80-800AT 10-1000AT 1-100AT Indicate Breaker Manufacturer: C - Cutler-Hammer (standard) S - Square D G - GE Distribution Equipment NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION CIRCUIT BREAKERS To complete the catalog number please add the appropriate suffix for other options/features. These suffixes can be found in the modifications table in this section. Visit our website at www.appletonelec.com or contact us at (800) 61-1506. May 014 109
- and 3-Pole, Non-Interchangeable Trip. Bolted Enclosure Type. Class I, Division 1 and, Groups B, C, D Class II, Division 1 and, Groups E, F, G Circuit Breaker Interrupting Ratings (Symmetrical RMS Amps) Breaker Type 40 Vac 480 Vac 600 Vac Distribution Equipment Cutler-Hammer EHD 18,000 14,000 FD 65,000 35,000 18,000 HFD 100,000 65,000 5,000 JD 65,000 35,000 18,000 HJD 100,000 65,000 5,000 KD 65,000 35,000 5,000 HKD 100,000 65,000 35,000 LD 65,000 35,000,000 HLD 100,000 65,000 35,000 MDL 65,000 50,000 5,000 HMDL 100,000 65,000 35,000 ND 65,000 50,000 5,000 HND 100,000 65,000 35,000 NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION CIRCUIT BREAKERS GE TED 18,000 18,000 14,000 THED 65,000 5,000 18,000 TFK 5,000,000 18,000 THFK 65,000 5,000 18,000 TJK4 4,000 30,000,000 THJK4 65,000 35,000 5,000 TJK6 4,000 30,000,000 THJK6 65,000 35,000 5,000 TKM8 4,000 30,000,000 THKM8 65,000 35,000 5,000 TKM1 4,000 30,000,000 THKM1 65,000 35,000 5,000 GE is a registered trademark of General Electric Company. Cutler-Hammer is a registered trademark of Eaton Corporation. 1030 Visit our website at www.appletonelec.com or contact us at (800) 61-1506. May 014
- and 3-Pole, Non-Interchangeable Trip. Bolted Enclosure Type. Class I, Division 1 and, Groups B, C, D Class II, Division 1 and, Groups E, F, G Breaker Frame Size 100 150 100 150 150 Breaker Type/ Interrupting Capacity EHD 18,000 AIC @ 40 Vac FD 65,000 AIC @ 40 Vac EHD 14,000 AIC FD 35,000 AIC FD 18,000 AIC Volts 480 Vac, 480 Vac, Amp Catalog Numbers Rating -Pole 3-Pole 15 AEAB115C AEAB1315C 0 AEAB10C AEAB130C 5 AEAB15C AEAB135C 30 AEAB130C AEAB1330C 35 AEAB135C AEAB1335C 40 AEAB140C AEAB1340C 50 AEAB150C AEAB1350C 60 AEBB160C AEBB1360C 70 AEBB170C AEBB1370C 80 AEBB180C AEBB1380C 90 AEBB190C AEBB1390C 100 AEBB110C AEBB1310C 15 AECB11C AECB131C 150 AECB115C AECB1315C 15 AEAB1415C AEAB13415C 0 AEAB140C AEAB1340C 5 AEAB145C AEAB1345C 30 AEAB1430C AEAB13430C 35 AEAB1435C AEAB13435C 40 AEAB1440C AEAB13440C 50 AEAB1450C AEAB13450C 60 AEBB1460C AEBB13460C 70 AEBB1470C AEBB13470C 80 AEBB1480C AEBB13480C 90 AEBB1490C AEBB13490C 100 AEBB1410C AEBB13410C 15 AECB141C AECB1341C 150 AECB1415C AECB13415C 15 AEAB1615C AEAB13615C 0 AEAB160C AEAB1360C 5 AEAB165C AEAB1365C 30 AEAB1630C AEAB13630C 35 AEAB1635C AEAB13635C 40 AEAB1640C AEAB13640C 50 AEAB1650C AEAB13650C 60 AEBB1660C AEBB13660C 70 AEBB1670C AEBB13670C 80 AEBB1680C AEBB13680C 90 AEBB1690C AEBB13690C 100 AEBB1610C AEBB13610C 15 AECB161C AECB1361C 150 AECB1615C AECB13615C Standard Conduit Outlets (Inches) 1-1/ -1/ 1-1/ -1/ 1-1/ -1/ Distribution Equipment NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION CIRCUIT BREAKERS For higher interrupting capacities, contact your local representative. Cutler-Hammer breaker provided as standard. For GE breaker change C to G; For Square D breaker change C to S. To complete the catalog number please add the appropriate suffix for other options/features. These suffixes can be found under Options. Visit our website at www.appletonelec.com or contact us at (800) 61-1506. May 014 1031
- and 3-Pole, Non-Interchangeable Trip. Bolted Enclosure Type. Class I, Division 1 and, Groups B, C, D Class II, Division 1 and, Groups E, F, G Distribution Equipment NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION CIRCUIT BREAKERS Breaker Frame Size 50 400 600 800 100 Breaker Type/ Interrupting Capacity JD 18,000 AIC JD 35,000 AIC KD 5,000 AIC KD 35,000 AIC LD 5,000 AIC LD 35,000 AIC MDL 5,000 AIC MDL 50,000 AIC MDL 5,000 AIC MDL 50,000 AIC Volts Amp Catalog Numbers Rating -Pole 3-Pole 70 AEEB670C AEEB3670C Standard Conduit Outlets (Inches) 90 AEEB690C AEEB3690C 100 AEEB610C AEEB3610C 15 AEEB61C AEEB361C 3 175 AEEB617C AEEB3617C 00 AEEB60C AEEB360C 5 AEEB6C AEEB36C 50 AEFB65C AEFB365C 4 15 AEFB461C AEFB4361C 175 AEFB4617C AEFB43617C 00 AEFB460C AEFB4360C 5 AEFB46C AEFB436C 50 AEFB465C AEFB4365C 300 AEFB4630C AEFB43630C 350 AEFB4635C AEFB43635C 400 AEFB4640C AEFB43640C 450 AEDB6645C AEDB63645C 500 AEDB6650C AEDB63650C 600 AEDB6660C AEDB63660C 300 AELB8630C AELB83630C 350 AELB8635C AELB83635C 400 AELB8640C AELB83640C 450 AELB8645C AELB83645C 500 AELB8650C AELB83650C 600 AELB8660C AELB83660C 700 AELB8670C AELB83670C 800 AELB8680C AELB83680C 600 AEGB1660C AEGB13660C 800 AEGB1680C AEGB13680C 1000 AEGB1610C AEGB13610C 100 AEGB161C AEGB1361C 4 4 () 4 () 4 To complete the catalog number please add the appropriate suffix for other options/features. These suffixes can be found under Options. For higher interrupting capacities, contact your local representative. Cutler-Hammer breaker provided as standard. For GE breaker change C to G; For Square D breaker change C to S. 103 Visit our website at www.appletonelec.com or contact us at (800) 61-1506. May 014
AE Bolted Circuit Breaker Enclosure Dimensions - and 3-Pole, Non-Interchangeable Trip. Bolted Enclosure Type. Enclosure Only Enclosure Size Catalog Number Dia. Number A AEAB 1 B AEBB 1 C AECB 1 E AEEB 1 F AEFB-50 1 F AEFB-400 D AEDB L AELB 3 G AEGB 4 Dimensions in Millimeters (Inches) Mounting Inside Outside A B J C D E F G H 139.7 (5.50) 15.4 (6.00) 60.3 (10.5) 15.9 (8.50) 41.3 (9.50) 41.3 (9.50) 409.7 (16.13) 543.1 (1.38) 333.5 (13.13) 457. (18.00) 574.8 (.63) 689.1 (7.13) 69.1 (7.5) 69.1 (7.5) 1035.0 (40.75) 115.6 (45.38) 170.0 (50.00) 358.9 (14.13) 78.6 (19.00) 155.7 (6.13) 165.1 (6.50) 89.0 (11.38) 85.7 (11.5) 85.7 (11.5) 85.7 (11.5) 457. (18.00) 473. (18.63) 508.0 (0.00) 73.0 (10.75) 508.0 (0.00) 758.9 (9.88) 758.9 (9.88) 758.9 (9.88) 1079.5 (4.50) 1073.1 (4.5) 154.0 (60.00) 133.3 (5.5) 139.7 (5.50) 16.0 (6.38) 183.8 (7.63) 04.7 (8.06) 04.7 (8.06) 193.8 (7.63) 15.9 (8.50) 54.0 (10.00) 70.0 (10.63) 79.4 (11.00) 416.0 (16.38) 416.0 (16.38) 346. (13.63) 606.5 (3.88) 635.0 (5.00) 387.3 (15.5) 50.7 (0.50) 638.3 (5.13) 749.3 (9.50) 889.0 (35.00) 889.0 (35.00) 96.1 (37.88) 116.1 (47.88) 1651 (65.00) 4.5 (8.84) 7.8 (8.97) 43.5 (9.59) 311.9 (1.8) 313.4 (1.34) 30.8 (1.63) 35.3 (1.81) 361.9 (14.5) 534.0 (1.38) Number of Outlets 4 6 Dimension mm (in) K 50.8 (.00) 58.6 (.31) 88.9 (3.50) 101.6 (4.00) 106.4 (4.19) 106.4 (4.19) 109.4 (4.31) 17.0 (5.00) 111. (4.38) Approximate Weight kgs (lbs) 17.4 (38) 5.85 (57) 47.17 (104) 65.77 (145) 77.11 (170) 77.11 (170) 103.4 (8) 190.06 (419) 57.19 (567) Distribution Equipment NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION CIRCUIT BREAKERS Visit our website at www.appletonelec.com or contact us at (800) 61-1506. May 014 1033