SUGGESTED LIST PRICES 2017 RESIDENTIAL AND COMMERCIAL IRRIGATION Built on Innovation EFFECTIVE APRIL 3, 2017 Supersedes all previous price lists. Prices and specifications are subject to change without notice.
TABLE OF CONTENTS ROTORS... 3 PGJ: Gear-Driven Rotors...3 SRM: Gear-Driven Rotors...3 PGP Ultra: Gear-Driven Rotors...4 PGP Ultra: Pressure-Regulated Body...4 PGP Ultra: MPR Nozzles...4 PGP Ultra Accessories...5 PGP : Gear-Driven Rotors...5 PGP Accessories...5 I-20: Gear-Driven Rotors...6 I-20: Pressure-Regulated Body...7 I-25: Gear-Driven Rotors...8 I-40: Gear-Driven Rotors...9 I-90: Gear-Driven Rotors...10 Rotor Accessories...10 ST System: Synthetic Turf Rotors and Component Accessories...10 ST Rotors...11 ST Accessories...11 ST Fittings...12 ST Rotor Tool...12 SWING JOINTS... 13 HSJ Swing Joints...13 MP ROTATOR... 14 MP Rotator Accessories...16 SPRAYS... 16 PS Ultra: Sprays with Pre-Installed Nozzle...16 PS Ultra Accessories...17 Pro-Spray : Residential/Commercial Sprays...17 Pro-Spray Accessories...18 Pro-Spray PRS30: 30 PSI Pressure-Regulated Commercial Sprays...18 Pro-Spray PRS30 Accessories...19 Pro-Spray PRS40: 40 PSI Pressure-Regulated Commercial Sprays...19 Pro-Spray PRS40 Accessories...19 NOZZLES... 20 Spray Nozzles...20 Filter Screens...21 Bubblers and Bubbler Nozzles...21 VALVES... 22 1" PGV: Professional-Grade Valves...22 1" PGV Jar-Top: Professional-Grade Valves with Jar-Top Bonnet...23 PGV 1 ½" & 2" Valves...24 ICV: Institutional Commercial Valves...24 IBV: Commercial Brass Valves...24 Accu Sync...25 Drip Control Zone Kit...25 Valve Accessories...25 HCV: Hunter Check Valves...26 Waterproof Connections...26 HQ: Quick Coupling Valves...26 HK: Quick Coupling Keys...27 HS: Quick Coupling Swivels...27 CONTROLLERS... 27 X-Core : Residential Controllers Indoor Mount...27 X-Core : Residential Controllers Outdoor Mount...27 XC Hybrid: Residential/Light Commercial Controllers (Battery Powered)...27 Pro-C Quick Reference Chart...28 Pro-C (Conventional): Residential/Light Commercial Controllers - Indoor Mount...28 Pro-C (Conventional): Residential/Light Commercial Controllers - Outdoor Mount...28 Pro-C : Residential/Light Commercial Controllers...29 HC: Residential Wi-Fi Controllers Indoor Mount...29 HC: Expansion Module suits 12-station Controller...29 HC: Residential Flow Meters...29 PRO-HC: Residential Wi-Fi Controllers Indoor/Outdoor Mount...29 HC: Subscription Plans...30 ICC2 Medium Controllers...30 I-Core : Commercial Controllers...30 DUAL : Decoder System for I-Core Controllers...31 ACC: Advanced Commercial Controller with Real-Time Flow-Sensing Capability...31 ACC: Communications Components & Accessories...31 ACC2 Next-Generation Advanced Commercial Controller...32 ACC Decoder: Two-Wire Decoder Version...32 ICD-HP: Handheld Decoder Programmer for ICD Decoders...32 Decoder Cables...33 NODE: Battery-Operated Controller...34 Wireless Valve System: Multi-Station Battery-Operated Controller and Programmer...34 ROAM XL: Remote Control System...34 ROAM: Residential Remote Control System...35 PSR: Pump Start Relay...35 CENTRAL CONTROL... 35 Irrigation Management and Monitoring System: Central Control...35 1
TABLE OF CONTENTS SENSORS... 36 Mini-Clik : Rain Sensors...36 Rain-Clik : Rain Sensors...36 Wireless Rain-Clik: Rain Sensors...36 Freeze-Clik : Freeze Sensors...37 Soil-Clik...37 Wind-Clik...37 Mini-Weather Station...37 Flow Sensors...37 Solar Sync...38 Sensor Accessories...38 MICRO IRRIGATION... 39 Eco-Mat...39 Eco-Wrap...39 PLD: 17-mm Professional Landscape Dripline...39 Micro System Accessories...40 PLD: 17-mm Professional Landscape Dripline Reclaimed Water...40 PLD: 17-mm Insert Fittings...41 MLD: ¼" (6-mm) Mini Landscape Dripline...41 Drip Emitters (Pressure Compensating)...42 Multi-Port Emitter...43 Risers...43 Rigid Risers...44 Micro-Sprays & Micro Bubblers...44 Distribution and Supply Tubings...44 Root Zone Watering System...45 RZWS Accessories...47 ACCESSORIES... 47 SJ: Threaded Swing Joint...47 Hunter Flexible Tubing Swing Pipe...47 Hunter Spiral Barb Elbows...47 Tools...48 SpotShot Nozzles...48 ORDERING INFORMATION The following general conditions apply to authorized Hunter distributors: Pricing All prices are effective as of the publication date noted on the cover, but are subject to change without notice. Hunter will provide advance notice of price changes whenever possible. Otherwise, accepted orders will be invoiced at prices given on the date the order was received. Carton Quantity Orders Orders must be placed in multiples of the carton quantities listed in this price list, except where noted. Orders received that are not in multiples of carton quantities will be rounded up to the nearest carton quantity multiple. Promo Store View available Hunter promotional materials at promo.hunterindustries.com and place your order through your Customer Service Representative. Document Library Search and download available literature and view items in stock at hunterindustries.com/document-list. Place your order for in-stock items through your Customer Service Representative. Learn more. Visit hunterindustries.com 2
ROTORS PGJ: GEAR-DRIVEN ROTORS PGJ, SHRUB ROTOR WITH 8 STANDARD NOZZLES, ½ INLET PGJ-00 Shrub body, adjustable arc (40-360 ), no check valve 25 18.00 PGJ-00-R Shrub body, adjustable arc (40-360 ), with reclaimed 25 21.00 water ID logo cap PGJ, 4 POP-UP ROTOR WITH 8 STANDARD NOZZLES, ½ INLET PGJ-04 Adjustable arc (40-360 ), no check valve 25 19.00 PGJ-04-V Adjustable arc (40-360 ), with check valve 25 21.00 PGJ-04-R Adjustable arc (40-360 ), with check valve and reclaimed water ID logo cap 25 22.00 PGJ, 6 POP-UP ROTOR WITH 8 STANDARD NOZZLES, ½ INLET PGJ-06 Adjustable arc (40-360 ), no check valve 25 27.00 PGJ-06-V Adjustable arc (40-360 ), with check valve 25 29.00 PGJ-06-R Adjustable arc (40-360 ), with check valve and reclaimed water ID logo cap 25 31.00 PGJ, 12 POP-UP ROTOR WITH 8 STANDARD NOZZLES, ½ INLET PGJ-12 Adjustable arc (40-360 ), no check valve 12 38.00 PGJ-12-V Adjustable arc (40-360 ), with check valve 12 40.00 PGJ-12-R Adjustable arc (40-360 ), with check valve and reclaimed water ID logo cap 12 42.00 SRM: GEAR-DRIVEN ROTORS SRM, 4 POP-UP ROTOR WITH 6 STANDARD NOZZLES, ½ INLET SRM-04 Adjustable arc (40-360 ), no check valve 25 16.00 Notes: PGJ and SRM sprinklers are sold in carton quantities only. Sprinklers are packed with racks of nozzles. 3
ROTORS PGP ULTRA: GEAR-DRIVEN ROTORS PGP ULTRA, SHRUB ROTOR WITH 8 STANDARD BLUE AND 4 LOW-ANGLE GRAY NOZZLES, ¾ INLET PGP-00 Adjustable arc (50 360 ), no check valve 20 19.00 PGP-00-CV Adjustable arc (50 360 ), with check valve 20 21.00 PGP-00-CV-R Adjustable arc (50 360 ), with check valve 20 23.00 and reclaimed water ID logo cap PGP ULTRA, 4 POP-UP ROTOR WITH 8 STANDARD BLUE AND 4 LOW-ANGLE GRAY NOZZLES, ¾ INLET PGP-04 Adjustable arc (50 360 ), no check valve 20 21.00 PGP-04-CV Adjustable arc (50 360 ), with check valve 20 23.00 PGP-04-CV-R Adjustable arc (50 360 ), with check valve and reclaimed water ID logo cap 20 24.00 PGP ULTRA, 12 POP-UP ROTOR WITH 8 STANDARD BLUE AND 4 LOW-ANGLE GRAY NOZZLES, ¾ INLET PGP-12-CV Adjustable arc (50 360 ), with check valve 12 43.00 PGP-12-CV-R Adjustable arc (50 360 ), with check valve 12 45.00 and reclaimed water ID logo cap PGP ULTRA: PRESSURE-REGULATED BODY PGP ULTRA, 4 POP-UP ROTOR WITH PRB BODY WITH 8 STANDARD BLUE AND 4 LOW-ANGLE GRAY NOZZLES, ¾ INLET PGP-04-PRB PRB body, adjustable arc (50 360 ), no check valve 20 25.00 PGP-04-CV-PRB PRB body, adjustable arc (50 360 ), with check valve 20 27.00 PGP-04-CV-R-PRB PRB body, adjustable arc (50 360 ), with check valve and reclaimed water ID logo cap 20 28.00 Notes: Nozzle information All PGP Ultra model sprinklers include a complete set of nozzles. All PGP Ultra sprinklers can be ordered with specific factory-installed nozzles #1.5 4.0 at no charge. Add the appropriate nozzle number to the end of the model number. For example, PGP-04-3.0 indicates that a 3.0 nozzle is factory installed. PGP Ultra sprinklers are sold in carton quantities only. PGP ULTRA: MPR NOZZLES MPR-25 Matched precipitation nozzle rack with all 25' radius nozzles. Includes a quarter-, third-, half-, and full-circle nozzle. 25/250 0.25 MPR-30 MPR-35 Matched precipitation nozzle rack with all 30' radius nozzles. Includes a quarter-, third-, half-, and full-circle nozzle. Matched precipitation nozzle rack with all 35' radius nozzles. Includes a quarter-, third-, half-, and full-circle nozzle. 25/250 0.25 25/250 0.25 Learn more. Visit hunterindustries.com 4
ROTORS PGP ULTRA ACCESSORIES 782900BOX Blue nozzle rack (nozzles 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, and 2.0 LA, 2.5 LA, 3.5 LA, 4.5 LA) 200 0.50 356605SP Dark blue nozzle rack (nozzles 1.0, 1.5, 2.0, 3.0, 3.5, 4.0, 6.0, 25 0.50 8.0, and 2.0 LA, 2.5 LA, 3.5 LA, 4.5 LA) 466100SP Black nozzle rack (nozzles 18' 0.50, 1.0, 2.0; 25' 0.75, 50 0.50 1.5, 3.0) 444800SP Green nozzle rack (nozzles 10, 13, and 6.0 LA, 8.0 LA) 25 2.00 253400SP Seal replacement kit (includes riser seal only) 10 1.00 181500SP PGP replacement riser seal 100 0.25 102600 Standard black filter screen 1 0.50 142300SP Standard black filter screen with check valve 25 1.00 463551SP Rotor staking kit (for models PGP-00 and I-20-00) 1 4.00 PGP : GEAR-DRIVEN ROTORS PGP, 4 POP-UP ROTOR WITH 8 STANDARD BLUE NOZZLES, ¾ INLET PGP-ADJ-B Adjustable arc (40 360 ), no check valve 20 20.00 Notes: Nozzle information All PGP model sprinklers include a complete set of standard blue nozzles. All PGP-ADJ-B sprinklers can be ordered with nozzles #1.5 4.0 factory installed at no additional charge. Add the appropriate nozzle number to the end of the model number. For example, PGP-ADJ-B3.0 indicates that a #3.0 nozzle is factory installed. PGP-ADJ-B sprinklers are sold in carton quantities only. PGP, 4 POP-UP ROTOR WITH 12 STANDARD RED NOZZLES, ¾ INLET PGP-ADJ Adjustable arc (40 360 ), no check valve 20 20.00 Notes: Nozzle information All PGP-ADJ model sprinklers include a complete set of standard red nozzles. All PGP-ADJ sprinklers can be ordered with nozzles #5, 6, 7, and 8 factory installed at no additional charge. Add the appropriate nozzle number to the end of the model number. For example, PGP-ADJ-07 indicates that a #7 nozzle is factory installed. PGP-ADJ sprinklers are sold in carton quantities only. PGP ACCESSORIES 665300BOX Blue nozzle rack (nozzles 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0) 300 0.50 130900SP Red nozzle rack (nozzles #1 12) 50 0.50 233200SP Gray low-angle nozzle rack (nozzles #4, 5, 6, 7, 8, 9, 10, plug) 50 0.50 120300SP Nozzle retainer screw for PGP-ADJ group 25 0.50 253400SP Seal replacement kit (includes riser seal only) 10 1.00 181500SP PGP replacement riser seal 100 0.25 102600 Standard black filter screen 1 0.50 142300SP Standard black filter screen with check valve 25 1.00 5
ROTORS I-20: GEAR-DRIVEN ROTORS I-20, SHRUB ROTOR WITH 8 STANDARD BLUE AND 4 LOW-ANGLE GRAY NOZZLES, ¾ INLET I-20-00 Adjustable arc (50 360 ), with check valve 20 22.00 I-20-00-R Adjustable arc (50 360 ), with check valve and reclaimed 20 26.00 water ID logo cap I-20, 4 POP-UP ROTOR WITH 8 STANDARD BLUE AND 4 LOW-ANGLE GRAY NOZZLES, ¾ INLET I-20-04-NCV Adjustable arc (50 360 ), with plastic riser, no check valve 20 25.00 I-20-04 Adjustable arc (50 360 ), with plastic riser and check valve 20 25.00 I-20-04-R Adjustable arc (50 360 ), with plastic riser, check valve, 20 29.00 and reclaimed water ID logo cap I-20-04-SS-NCV Adjustable arc (50 360 ), with stainless steel riser, 20 34.00 no check valve I-20-04-SS Adjustable arc (50 360 ), with stainless steel riser 20 34.00 and check valve I-20-04-SS-R Adjustable arc (50 360 ), with stainless steel riser, check valve, and reclaimed water ID logo cap 20 38.00 I-20, 6 POP-UP ROTOR WITH 8 STANDARD BLUE AND 4 LOW-ANGLE GRAY NOZZLES, ¾ INLET I-20-06 Adjustable arc (50 360 ), with plastic riser and check valve 20 35.00 I-20-06-R Adjustable arc (50 360 ), with plastic riser, check valve, 20 39.00 and reclaimed water ID logo cap I-20-06-SS Adjustable arc (50 360 ), with stainless steel riser 20 47.00 and check valve I-20-06-SS-R Adjustable arc (50 360 ), with stainless steel riser, check valve, and reclaimed water ID logo cap 20 51.00 I-20, 12 POP-UP ROTOR WITH 8 STANDARD BLUE AND 4 LOW-ANGLE GRAY NOZZLES, ¾ INLET I-20-12 Adjustable arc (50 360 ), with check valve 12 50.00 I-20-12-R Adjustable arc (50 360 ), with check valve 12 55.00 and reclaimed water ID logo cap Notes: Nozzle information All I-20 model sprinklers include a complete set of nozzles. All I-20 sprinklers can be ordered with specific factory-installed nozzles #1.5 4.0 at no charge. Add the appropriate nozzle number to the end of the model number. For example, I-20-04-3.0 indicates that a 3.0 nozzle is factory installed. I-20 sprinklers are sold in carton quantities only. Learn more. Visit hunterindustries.com 6
ROTORS I-20: PRESSURE-REGULATED BODY I-20, 4 POP-UP ROTOR WITH PRB BODY WITH 8 STANDARD BLUE AND 4 LOW-ANGLE GRAY NOZZLES, ¾ INLET I-20-04-PRB I-20-04-R-PRB I-20-04-SS-PRB I-20-04-SS-R-PRB PRB body, adjustable arc (50-360 ), with plastic riser and check valve PRB body, adjustable arc (50-360 ), with plastic riser, check valve, and reclaimed cap water ID logo PRB body, adjustable arc (50-360 ), with stainless steel riser and check valve PRB body, adjustable arc (50-360 ), with stainless steel riser, check valve, and reclaimed water ID logo cap 20 29.00 20 33.00 20 38.00 20 42.00 I-20, 6 POP-UP ROTOR WITH PRB BODY WITH 8 STANDARD BLUE AND 4 LOW-ANGLE GRAY NOZZLES, ¾ INLET I-20-06-PRB I-20-06-R-PRB PRB body, adjustable arc (50-360 ), with plastic riser and check valve PRB body, adjustable arc (50-360 ), with plastic riser, check valve, and reclaimed water ID logo cap 20 39.00 20 43.00 I-20-06-SS-PRB I-20-06-SS-R-PRB PRB body, adjustable arc (50-360 ), with stainless steel riser and check valve PRB body, adjustable arc (50-360 ), with stainless steel riser, check valve, and reclaimed water ID logo cap 20 51.00 20 55.00 I-20 MPR NOZZLES MPR-25 Matched precipitation nozzle rack with all 25' radius nozzles. Includes a quarter-, third-, half-, and full-circle nozzle. 25/250 0.25 MPR-30 MPR-35 Matched precipitation nozzle rack with all 30' radius nozzles. Includes a quarter-, third-, half-, and full-circle nozzle. Matched precipitation nozzle rack with all 35' radius nozzles. Includes a quarter-, third-, half-, and full-circle nozzle. 25/250 0.25 25/250 0.25 I-20 ACCESSORIES 782900BOX Blue nozzle rack (nozzles 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 200 0.50 and 2.0 LA, 2.5 LA, 3.5 LA, 4.5 LA) 356605SP Dark blue nozzle rack (nozzles 1.0, 1.5, 2.0, 3.0, 3.5, 4.0, 6.0, 25 0.50 8.0, and 2.0 LA, 2.5 LA, 3.5 LA, and 4.5 LA) 466100SP Black short radius nozzle rack (nozzles 18' 0.50, 1.0, and 2.0 50 0.50 GPM; 25' 0.75, 1.5, and 3.0 GPM) 444800SP Green nozzle rack (nozzles 10, 13, and 6.0, 8.0 LA) 25 2.00 102600 Standard black filter screen 1 0.50 142300SP Standard black filter screen with check valve 25 1.00 463551SP Rotor staking kit (for models PGP-00 and I-20-00) 1 4.00 Notes: Nozzle information All I-20 model sprinklers include a complete set of nozzles. I-20 sprinklers are sold in carton quantities only. 7
ROTORS I-25: GEAR-DRIVEN ROTORS I-25, 4 POP-UP ROTOR WITH 1 NPT INLET I-25-04 Adjustable arc (50-360 ), with plastic riser and check valve 12 55.00 I-25-04-R Adjustable arc (50-360 ), with plastic riser, check valve, 12 63.00 and reclaimed water ID logo cap I-25-04-SS Adjustable arc (50-360 ), with stainless steel riser 12 70.00 and check valve I-25-04-SS-R Adjustable arc (50-360 ), with stainless steel riser, check valve, and reclaimed water ID logo cap 12 78.00 SPECIAL PURPOSE I-25, 4 POP-UP ROTOR WITH 1 NPT INLET I-25-04-SS-HS I-25-04-SS-HS-R High-speed, adjustable arc (50-360 ), with stainless steel riser and check valve High-speed, adjustable arc (50-360 ), with stainless steel riser, check valve, and reclaimed water ID logo cap 12* 165.00 12* 175.00 I-25, 6 POP-UP ROTOR WITH 1 NPT INLET I-25-06 Adjustable arc (50-360 ), with plastic riser and check valve 12 70.00 I-25-06-R Adjustable arc (50-360 ), with plastic riser, check valve, 12 78.00 and reclaimed water ID logo cap I-25-06-SS Adjustable arc (50-360 ), with stainless steel riser 12 85.00 and check valve I-25-06-SS-R Adjustable arc (50-360 ), with stainless steel riser, check valve, and reclaimed water ID logo cap 12 93.00 SPECIAL PURPOSE I-25, 6 POP-UP ROTOR WITH 1 NPT INLET I-25-06-SS-HS I-25-06-SS-HS-R High-speed, adjustable arc (50-360 ), with stainless steel riser and check valve High-speed, adjustable arc (50 360 ), with stainless steel riser, check valve, and reclaimed water ID logo cap 12* 175.00 12* 185.00 Notes: Nozzle information All I-25 model sprinklers are packaged with nozzles #7, 10, 15, 20, and 25. All I-25 sprinklers can be ordered with a specific factory-installed nozzle at no charge. Add the appropriate nozzle number to the end of the model number. For example, I-25-04-15 or I-25-06-SS-R-15 indicates that a 15 nozzle is factory installed. I-25 sprinklers are sold in carton quantities only. *Special purpose sprinklers can be ordered in less than carton quantity. Learn more. Visit hunterindustries.com 8
ROTORS I-40: GEAR-DRIVEN ROTORS I-40, 4 POP-UP ROTOR WITH 1 NPT INLET I-40-04-SS I-40-04-SS-R I-40-04-SS-ON I-40-04-SS-ON-R Adjustable arc (50 360 ), with stainless steel riser and check valve Adjustable arc (50 360 ), with stainless steel riser, check valve, and reclaimed water ID logo cap Full-circle, with opposing nozzles, stainless steel riser, and check valve Full-circle, with opposing nozzles, stainless steel riser, check valve, and reclaimed water ID logo cap 12 105.00 12 113.00 12 120.00 12 128.00 SPECIAL PURPOSE I-40, 4 POP-UP ROTOR WITH 1 NPT INLET I-40-04-SS-HS I-40-04-SS-HS-R High-speed, adjustable arc (50 360 ), with stainless steel riser and check valve High-speed, adjustable arc (50 360 ), with stainless steel riser, check valve, and reclaimed water ID logo cap 12* 165.00 12* 175.00 I-40, 6 POP-UP ROTOR WITH 1 NPT INLET I-40-06-SS I-40-06-SS-R Adjustable arc (50 360 ), with stainless steel riser and check valve Adjustable arc (50 360 ), with stainless steel riser, check valve, and reclaimed water ID logo cap 12 120.00 12 128.00 I-40-06-SS-ON I-40-06-SS-ON-R Full-circle, with opposing nozzles, stainless steel riser, and check valve Full-circle, with opposing nozzles, stainless steel riser, check valve, and reclaimed water ID logo cap 12 130.00 12 138.00 SPECIAL PURPOSE I-40, 6 POP-UP ROTOR WITH 1 NPT INLET I-40-06-SS-HS I-40-06-SS-HS-R High-speed, adjustable arc (50 360 ), with stainless steel riser and check valve High-speed, adjustable arc (50 360 ), with stainless steel riser, check valve, and reclaimed water ID logo cap 12* 175.00 12* 185.00 Notes: Nozzle information All I-40 model sprinklers include a complete set of nozzles. All I-40 sprinklers can be ordered with a specific factory-installed nozzle at no charge. Add the appropriate nozzle number to the end of the model number. For example, I-40-04-SS-23 or I-40-06-SS-R-23 indicates that a #23 nozzle is factory installed. I-40 sprinklers are sold in carton quantities only. *Special purpose sprinklers can be ordered in less than carton quantity. 9
ROTORS I-90: GEAR-DRIVEN ROTORS I-90, 3 POP-UP ROTOR WITH 8 NOZZLES AND 1 ½ NPT INLET I-90-ADV Adjustable arc (40-360 ), with check valve 6 195.00 I-90-36V Full-circle, with check valve 6 195.00 I-90-ARV Adjustable arc (40-360 ), with check valve and reclaimed water 6 200.00 ID logo cap I-90-3RV Full-circle, with check valve and reclaimed water ID logo cap 6 200.00 Notes: Nozzle information All I-90 model sprinklers include a complete set of nozzles. All I-90 sprinklers can be ordered with a specific factory-installed nozzle at no charge. Add the appropriate nozzle number to the end of the model number. For example, I-90-ADV-43 or I-90-36V-43 indicates that a #43 nozzle is factory installed. I-90 sprinklers are sold in carton quantities only. ROTOR ACCESSORIES 222700 Sub-surface stabilizer flange (I-25 and I-40 rotors) 1 5.00 467955 Turf cup kit, converts I-90 sprinklers to turf cup model 1 70.00 234200 Rubber cover kit, I-90-ADV* 1 70.00 234201 Rubber cover kit, I-90 36V* 1 70.00 Notes: *Rubber cover kit: I-90-ADV: P/N 234200 (all); I-90 36V: P/N 234200 (0711 date code and after); I-90 36V: P/N 234201 (0611 date code and prior only) ST SYSTEM: SYNTHETIC TURF ROTORS AND COMPONENT ACCESSORIES ST SYSTEM KIT CONFIGURATIONS (ROTORS AND COMPONENT ACCESSORIES MUST BE ORDERED INDIVIDUALLY FROM LIST THAT FOLLOWS KITS) KIT NUMBER KIT DESCRIPTION AND INCLUDED ITEMS STK-1 STG-900 block system (remotely located valve), STG-900-83 rotor, 473900 rubber cover kit, ST- 173026-B vault, ST-2008-VA swing joint, HQ5RC quick coupler, 239300 & 239800 adapter fittings STK-2 STK-5V STK-6V STG-900 VAH system (valve adjacent to head), STG-900-83 rotor, 473900 rubber cover kit, ST- 173026-B vault, ST-2008-VA swing joint, ST-VBVF-K valve and fitting set, HQ-5RC quick coupler, 239800 adapter fitting ST-1600 block system (remotely located valve), ST-1600-B rotor, ST-IBS-1600 infill barrier system, ST-BKT-1600 rotor hanger bracket, ST-243636-B vault, ST-BVF30-K manifold kit, ST-H30-K inlet hose, ST-SPT-K support stand (two required) ST-1600 VAH system (valve adjacent to head), ST-1600-B rotor, ST-IBS-1600 infill barrier system, ST-BKT-1600 rotor hanger bracket, ST-243636-B vault, ST-BVF30-K manifold kit, ST-V30-KV control valve, ST-NDL-K adjustable slow opening kit, ST-H30-K inlet hose, ST-SPT-K support stand (two required), 855000 BSP inlet adapter (if needed), HQ-5RC quick coupler Learn more. Visit hunterindustries.com 10
ROTORS ST ROTORS ST-90-83 Pop-up, jar top, adjustable arc (40 360 ), 1 ½" NPT inlet 6 350.00 (does not fit ST-173026-B enclosure) STG-900-83 Pop-up, top service, adjustable arc (40 360 ), 1 ½" Acme inlet, 4 375.00 for kits STK-1 and STK-2 ST-1200-BR Riser mount, adjustable arc (40 360 ), 1 ½" NPT inlet 6 350.00 ST-1600-B Pop-up, top service, adjustable arc (40 360 ), 2" NPT inlet, for kits STK-5V, STK-6V 1 1,495.00 ST-1600-HS-B High-speed ST-1600-B 1 1,495.00 ST-1600-BR Riser mount, adjustable arc (40 360 ), 2" NPT inlet 6 795.00 ST-1600-HS-BR High-speed ST-1600-BR 6 795.00 ST ACCESSORIES ST-IBS-1600 Infill barrier system rubber cover kit for ST-1600-B rotor 1 195.00 ST-BKT-1600 Rotor vault hanger and grade adjustment bracket for ST-1600-B 1 295.00 rotor (for STK-5V & STK-6V) ST-BKT-QCV Hanger bracket for ST-QCV-20-B valve (for STK-QCV-2) 1 325.00 ST-173026-A Composite vault, 2 x pre-cast quick-access ports and sub-covers 2 per pallet 995.00 (no rotor hole, for STK-5V-HS-BR) ST-173026-B Composite vault, pre-cast holes for rotor & quick coupler (for 2 per pallet 995.00 STK-1 & STK-2) ST-173026-C Composite vault, 2 x pre-cast quick-access ports and sub-covers 2 per pallet 995.00 (for STK-QCV-1 & STK-QCV-2) ST-243636-B Composite vault, pre-cast hole for rotor and 2 x quick-access ports 2 per pallet 1,595.00 for quick coupler and remote on-off-auto selector (for STK-5V & STK-6V) ST-2008-VA VA swing joint, 2" PVC, 7 Acme pivot points (for STK-1 & STK-2) 1 395.00 ST-BVF30-K Manifold valve and fitting kit: 3" ductile iron galvanized grooved 1 1,195.00 fittings including 6 x grooved couplings, 3" grooved x 2" NPT rotor adapter fitting, 3" grooved x 1" NPT quick coupler point of connection adapter, 3" grooved x 3" NPT inlet adapter plus 3" ductile iron epoxy-coated butterfly valve and 1" brass ball-valve drain-valve (for STK-5V & STK-6V) ST-H30-K Ultra-flexible 3" x 26" stainless steel corrugated manifold inlet 1 595.00 hose with stainless steel braided outer support layer (for STK-5V & STK-6V) ST-SPT-K Adjustable manifold support stand, two required per STK-5V, 2 100.00 STK-6V (for STK-5V & STK-6V) ST-V20-KVP 2" plastic control valve with ultra-low loss and slow-opening safety feature, 3" grooved (Victaulic type) inlet/outlet fittings, 36" remotely located solenoid & on-off-auto selector manifold (for STK-6V) 1 895.00 11
ROTORS ST-V30-KV 3" metal control valve with ultra-low loss and slow-opening safety 1 1,595.00 feature, 3" grooved (Victaulic type) inlet/outlet fittings, 36" remotely located solenoid & on-off-auto selector manifold (for STK-6V) ST-NDL-K Adjustable valve opening speed kit (for STK-6V) 1 25.00 ST-ADH-K ST approved adhesive for attaching artificial turf, track, or 6 40.00 ST-FRP-1600 to the infill barrier system (approx. one needed per two IBS) ST-FRP-1600 Simulated concrete cover for attachment to flattened IBS, and used as base for pour-in-place running track material 2 100.00 ST-SSA AC standard solenoid kit 1 70.00 ST-LSA DC latching solenoid kit 1 75.00 ST-VBVF-K 1 ½" ICV-151G valve, manual ball valve, all connecting fittings 1 325.00 (for STK-2B) 234200 ST-90 rubber cover kit 1 70.00 473900 STG-900 rubber cover kit 1 115.00 HQ-5RC Quick coupler, 1" NPT inlet, 1 ¼" outlet for key (HK55 key and HS1B/HS2B swivel sold separately) 10 112.00 ST FITTINGS 239300 Connector between STG-900 rotor and 239800 elbow (STK-1) 1 9.50 239800 Elbow between ST-2008-VA swing joint and 239300 connector 1 19.50 (STK-1); also, elbow between STG-900 rotor and ST-VBVF-K (STK-2) 239302 Connects ST-90 NPT inlet rotor to ST-2008-VA swing joint 1 9.50 (not used in kits) 241400 Adapter, converts 2" PVC pipe to 2" male BSP threads 1 9.50 ST ROTOR TOOL 517600 ST-1600-B service tool, for removing gear drive from pop-up body (one required per site) 1 58.00 Learn more. Visit hunterindustries.com 12
SWING JOINTS HSJ SWING JOINTS HSJ-0 SWING JOINTS ¾ SINGLE TOP-OUT OR TRIPLE TOP-OUT HSJ-0-xx-208 ¾" single top-out, 8" lay arm 10 19.00 HSJ-0-xx-212 ¾" single top-out, 12" lay arm 10 20.00 HSJ-0-xx-218 ¾" single top-out, 18" lay arm 10 24.00 HSJ-1 SWING JOINTS 1 SINGLE TOP-OUT OR TRIPLE TOP-OUT HSJ-1-xx-212 1" single top-out, 12" lay arm 15 29.50 HSJ-1-xx-412 1" triple top-out, 12" lay arm 15 48.00 HSJ-1-xx-218 1" single top-out, 18" lay arm 15 33.50 HSJ-1-xx-418 1" triple top-out, 18" lay arm 15 51.50 HSJ-2 SWING JOINTS 1 ¼ SINGLE TOP-OUT OR TRIPLE TOP-OUT HSJ-2-xx-212 1¼" single top-out, 12" lay arm 15 42.00 HSJ-2-xx-412 1¼" triple top-out, 12" lay arm 15 63.00 HSJ-2-xx-218 1¼" single top-out, 18" lay arm 10 46.00 HSJ-2-xx-418 1¼" triple top-out, 18" lay arm 10 66.00 HSJ-3 SWING JOINTS 1 ½ SINGLE TOP-OUT OR TRIPLE TOP-OUT HSJ-3-xx-212 1½" single top-out, 12" lay arm 15 50.00 HSJ-3-xx-412 1½" triple top-out, 12" lay arm 10 74.50 HSJ-3-xx-218 1½" single top-out, 18" lay arm 10 53.50 HSJ-3-xx-418 1½" triple top-out, 18" lay arm 10 77.50 HSJ-SNAPLOK SWING JOINTS 1 SINGLE TOP-OUT FOR QUICK COUPLERS HSJ-1-x-S-212 HSJ-1-x-S-218 HSJ-1-x-T-212 HSJ-1-x-T-218 1" single top-out, 12" lay arm, 1" brass male NPT SnapLok outlet 1" single top-out, 18" lay arm, 1" brass male NPT SnapLok outlet 1 single top-out, 12" lay arm, ¾" brass male NPT SnapLok outlet 1" single top-out, 18" lay arm, ¾" brass male NPT SnapLok outlet 15 62.00 15 64.00 15 59.00 15 61.00 Notes: An xx or x in a model number indicates the need to insert the preferred number or letter style code of the swing joint s inlet and/or outlet. See the Hunter Golf Catalog or the Hunter Golf website for details. 13
MP ROTATOR MP ROTATOR MP-800SR MP-800SR-90 MP-800SR: adjustable radius (6' 12'), adjustable arc (90 210 ), female threaded (orange) MP-800SR-360 MP-800SR: adjustable radius (6' 12'), 360, female threaded (lime green) 10/200 10.75 10/200 10.75 MP-1000 MP-1000-90 MP-1000: adjustable radius (8' 15'), adjustable arc (90 210 ), 10/200 10.75 female threaded (maroon) MP-1000-210 MP-1000: adjustable radius (8' 15'), adjustable arc (210 270 ), 10/200 10.75 female threaded (light blue) MP-1000-360 MP-1000: adjustable radius (8' 15'), 360, female threaded (olive) 10/200 10.75 MP-2000 MP-2000-90 MP-2000: adjustable radius (13' 21'), adjustable arc (90 210 ), 10/200 10.75 female threaded (black) MP-2000-210 MP-2000: adjustable radius (13' 21'), adjustable arc (210 270 ), 10/200 10.75 female threaded (green) MP-2000-360 MP-2000: adjustable radius (13' 21'), 360, female threaded (red) 10/200 10.75 MP-3000 MP-3000-90 MP-3000: adjustable radius (22' 30'), adjustable arc (90 210 ), female threaded (blue) MP-3000-210 MP-3000: adjustable radius (22' 30'), adjustable arc (210 270 ), female threaded (yellow) MP-3000-360 MP-3000: adjustable radius (22' 30'), 360, female threaded (gray) 10/200 10.75 10/200 10.75 10/200 10.75 MP-3500 MP-3500-90 MP-3500: adjustable radius (31' 35'), adjustable arc (90 210 ), female threaded (tan) 10/200 10.75 MP-1000-HT* MP-1000-HT-90 MP-1000: adjustable radius (8' 15'), adjustable arc (90 210 ), 10/200 13.00 male threaded (maroon) MP-1000-HT-360 MP-1000: adjustable radius (8' 15'), 360, male threaded (olive) 10/200 13.00 Notes: The MP-1000-HT-210 light blue nozzle is not available with male threads. All MP Rotator nozzles are sold in bag/carton quantities only. All nozzles include filter screen. Learn more. Visit hunterindustries.com 14
MP ROTATOR MP-2000-HT* MP-2000-HT-90 MP-2000: adjustable radius (13' 21'), adjustable arc (90 210 ), 10/200 13.00 male threaded (black) MP-2000-HT-210 MP-2000: adjustable radius (13' 21'), adjustable arc (10 270 ), 10/200 13.00 male threaded (green) MP-2000-HT-360 MP-2000: adjustable radius (13' 21'), 360, male threaded (red) 10/200 13.00 Note: *Represents male threaded version. MP-3000-HT* MP-3000-HT-90 MP-3000: adjustable radius (22' 30'), adjustable arc (90 210 ), 10/200 13.00 male threaded (blue) MP-3000-HT-210 MP-3000: adjustable radius (22' 30'), adjustable arc (210 270 ), 10/200 13.00 male threaded (yellow) MP-3000-HT-360 MP-3000: adjustable radius (22' 30'), 360, male threaded (gray) 10/200 13.00 MP CORNER MP-CORNER MP corner: adjustable radius (8' 15 ), adjustable arc (45 105 ), female threaded (turquoise) 10/200 10.75 MP STRIP MP-LCS-515 MP left corner, 5' x 15' female threaded (ivory) 10/200 10.75 MP-RCS-515 MP right corner, 5' x 15', female threaded (copper) 10/200 10.75 MP-SS-530 MP side strip, 5' x 30', female threaded (brown) 10/200 10.75 MP CORNER HT* MP-CORNER-HT MP corner: adjustable radius (8' x 15'), adjustable arc (45 105 ), male threaded (turquoise) 10/200 13.00 MP STRIP HT* MP-LCS-HT-515 MP left corner, 5' x 15', male threaded (ivory) 10/200 13.00 MP-RCS-HT-515 MP right corner, 5' x 15', male threaded (copper) 10/200 13.00 MP-SS-HT-530 MP side strip, 5' x 30', male threaded (brown) 10/200 13.00 Notes: *Represents male threaded version. All MP Rotator nozzles are sold in carton quantities only. All nozzles include filter screen. 15
MP ROTATOR MP ROTATOR ACCESSORIES MPTOOL Adjustment tool, arc/radius 10 1.55 MP8SCREENSP Very fine-mp-800 50 0.25 MPFSCREENSP Fine-MP-2000/MP-1000 50 0.25 MPCSCREENSP Coarse-MP-3000/MP-3500 50 0.25 MPTFSCREENSP Fine-MP-2000-HT/MP-1000-HT 50 0.25 MPTCSCREEN Coarse-MP-3000-HT 50 0.25 MPSTICK Two-piece tool kit, arc/radius, decal included 1 3.75 MPADAPTER Pressure gauge adapter, MP Rotator 1 2.70 MPGAUGE Pressure gauge with adapter 1 50.00 SPRAYS PS ULTRA: SPRAYS WITH PRE-INSTALLED NOZZLE MODEL PS ULTRA, 2" POP-UP SPRAYS WITH PRE-INSTALLED NOZZLE OR FLUSH PLUG AND ½" INLET PSU-02 With flush plug, no large screen 100 2.75 PSU-02-8A 8' radius, adjustable arc (0 360 ), no large screen 100 4.65 PSU-02-10A 10' radius, adjustable arc (0 360 ), no large screen 100 4.65 PSU-02-12A 12' radius, adjustable arc (0 360 ), no large screen 100 4.65 PSU-02-15A 15' radius, adjustable arc (0 360 ), no large screen 100 4.65 PSU-02-17A 17' radius, adjustable arc (0 360 ), no large screen 100 4.65 PSU-02-5SS 5' x 30', side strip, no large screen 100 4.65 MODEL PS ULTRA, 4" POP-UP SPRAYS WITH PRE-INSTALLED NOZZLE OR FLUSH PLUG AND ½" INLET PSU-04 With flush plug, no large screen 100 2.90 PSU-04-8A 8' radius, adjustable arc (0 360 ) 100 4.80 PSU-04-10A 10' radius, adjustable arc (0 360 ) 100 4.80 PSU-04-12A 12' radius, adjustable arc (0 360 ) 100 4.80 PSU-04-15A 15' radius, adjustable arc (0 360 ) 100 4.80 PSU-04-17A 17' radius, adjustable arc (0 360 ) 100 4.80 PSU-04-5SS 5' x 30', side strip 100 4.80 MODEL PS ULTRA, 6" POP-UP SPRAYS WITH PRE-INSTALLED NOZZLE OR FLUSH PLUG AND ½" INLET PSU-06 With flush plug, no large screen 100 7.50 PSU-06-8A 8' radius, adjustable arc (0 360 ) 100 8.55 PSU-06-10A 10' radius, adjustable arc (0 360 ) 100 8.55 PSU-06-12A 12' radius, adjustable arc (0 360 ) 100 8.55 PSU-06-15A 15' radius, adjustable arc (0 360 ) 100 8.55 PSU-06-17A 17' radius, adjustable arc (0 360 ) 100 8.55 Note: PS Ultra sprinklers are sold in carton quantities only. Learn more. Visit hunterindustries.com 16
SPRAYS PS ULTRA ACCESSORIES 162900SP PS Ultra replacement filter screen (fits 4" and 6" bodies) 25 0.55 462237SP PS Ultra drain check valve, field installed 25 0.90 (available for 4" and 6" bodies only) 916400SP Shut-off nozzle for PS Ultra and Pro-Spray 10 2.00 PRO-SPRAY : RESIDENTIAL/COMMERCIAL SPRAYS PRO-SPRAY SPRINKLER BODIES WITH ½" INLET PROS-00 Shrub adapter, fits onto ½" NPT riser, accepts female 25/250 1.15 threaded nozzles PROS-02 2" pop-up spray body, accepts female threaded nozzles 50 3.65 PROS-03 3" pop-up spray body, accepts female threaded nozzles 50 3.65 PROS-04 4" pop-up spray body, accepts female threaded nozzles 50 2.45 PROS-06 6" pop-up spray body, no side inlet, accepts female threaded 25 8.80 nozzles (formerly PROS-06-NSI) PROS-12 12" pop-up spray body, no side inlet, accepts female threaded 25 13.50 nozzles (formerly PROS-12-NSI) PROS-06-SI 6" pop-up spray body, with side inlet, accepts female 25 9.30 threaded nozzles PROS-12-SI 12" pop-up spray body, with side inlet, accepts female 25 16.00 threaded nozzles PROS-04-CV 4" pop-up spray body with check valve, accepts female 50 5.90 threaded nozzles PROS-06-CV 6" pop-up spray body with check valve, no side inlet, 25 13.50 accepts female threaded nozzles PROS-12-CV 12" pop-up spray body with check valve, no side inlet, 25 18.50 accepts female threaded nozzles PROS-00-R Shrub adapter, fits onto ½" NPT riser, accepts female 25/250 2.20 threaded nozzles, with reclaimed water body cap PROS-04-CV-R 4" pop-up spray body with check valve, accepts female 50 10.00 threaded nozzles, with reclaimed water body cap PROS-06-CV-R 6" pop-up spray body with check valve, no side inlet, accepts female threaded nozzles, with reclaimed water body cap 25 18.00 PROS-12-CV-R 12" pop-up spray body with check valve, no side inlet, accepts female threaded nozzles, with reclaimed water body cap 25 23.00 Note: Pro-Spray sprinklers are sold in carton quantities only. 17
SPRAYS PRO-SPRAY ACCESSORIES PROS-RC-CAP Snap-on reclaimed water identification cap, 1 1.05 fits all Pro-Spray bodies 458520SP Reclaimed water thread-on body cap, Pro-Spray 25 3.95 458525 Reclaimed water thread-on body cap, Pro-Spray 1 3.95 with check valve ID 213600SP Shut-off cap for Pro-Spray, thread-on 5 2.00 916400SP Shut-off nozzle for PS Ultra and Pro-Spray 10 2.00 437400SP Drain check valve for all pop-up Pro-Spray models 25 1.00 PRO-SPRAY PRS30: 30 PSI PRESSURE-REGULATED COMMERCIAL SPRAYS PRO-SPRAY PRS30 SPRINKLER BODIES WITH ½" INLET (BROWN CAP) PROS-00-PRS30 PROS-04-PRS30 PROS-06-PRS30 Pressure-regulated shrub adapter, fits onto ½" NPT riser, accepts female threaded nozzles 4" pop-up spray body with pressure regulator, accepts female threaded nozzles 6" pop-up spray body with pressure regulator, no side inlet, accepts female threaded nozzles (formerly PROS-06-NSI-PRS30) 25/250 6.00 50 7.60 25 17.00 PROS-12-PRS30 PROS-06-SI-PRS30 PROS-12-SI-PRS30 PROS-04-PRS30-CV PROS-06-PRS30-CV PROS-12-PRS30-CV PROS-00-PRS30-R PROS-04-PRS30-CV-R PROS-06-PRS30-CV-R PROS-12-PRS30-CV-R 12" pop-up spray body with pressure regulator, no side inlet, accepts female threaded nozzles (formerly PROS-12-NSI-PRS30) 6" pop-up spray body with pressure regulator, with side inlet, accepts female threaded nozzles 12" pop-up spray body with pressure regulator, with side inlet, accepts female threaded nozzles 4" pop-up spray body with pressure regulator and check valve, accepts female threaded nozzles 6" pop-up spray body with pressure regulator and check valve, no side inlet, accepts female threaded nozzles 12" pop-up spray body with pressure regulator and check valve, no side inlet, accepts female threaded nozzles Pressure-regulated shrub adapter, fits onto ½" NPT riser, accepts female threaded nozzles, with reclaimed water body cap 4" pop-up spray body with check valve, accepts female threaded nozzles, with reclaimed water body cap 6" pop-up spray body with check valve, no side inlet, accepts female threaded nozzles, with reclaimed water body cap 12" pop-up spray body with check valve, no side inlet, accepts female threaded nozzles, with reclaimed water body cap 25 20.00 25 19.00 25 22.00 50 10.00 25 21.00 25 26.00 25/250 8.50 50 14.00 25 25.00 25 31.00 Note: Pro-Spray sprinklers are sold in carton quantities only. Learn more. Visit hunterindustries.com 18
SPRAYS PRO-SPRAY PRS30 ACCESSORIES PROS-RC-CAP Snap-on reclaimed water identification cap, fits all 1 1.05 Pro-Spray bodies 213600SP Shut-off cap for Pro-Spray, thread-on 5 2.00 916400SP Shut-off nozzle for PS Ultra and Pro-Spray 10 2.00 437400SP Drain check valve for all pop-up Pro-Spray models 25 1.00 458560 Pro-Spray PRS30 reclaimed water thread-on body cap 1 3.95 with check valve ID PROS-PRS30-VPC Pro-Spray PRS30 brown vandal-proof cap 1 4.00 PRO-SPRAY PRS40: 40 PSI PRESSURE-REGULATED COMMERCIAL SPRAYS PRO-SPRAY PRS40 SPRINKLER BODIES WITH ½" INLET (GRAY CAP) PROS-00-PRS40 Pressure-regulated shrub adapter, fits onto ½" NPT riser, accepts standard female threaded nozzles 25/250 6.00 PROS-04-PRS40-CV PROS-06-PRS40-CV PROS-12-PRS40-CV PROS-00-PRS40-R PROS-04-PRS40- CV-R PROS-06-PRS40- CV-R PROS-12-PRS40- CV-R 4" pop-up spray body with pressure regulator and check valve, accepts female threaded nozzles 6" pop-up spray body with pressure regulator and check valve, no side inlet, accepts female threaded nozzles 12" pop-up spray body with pressure regulator and check valve, no side inlet, accepts female threaded nozzles Pressure-regulated shrub adapter, fits onto ½" NPT riser, reclaimed water body, accepts standard female threaded nozzles 4" pop-up spray body with pressure regulator and check valve, accepts female threaded nozzles, with reclaimed water body cap 6" pop-up spray body with pressure regulator and check valve, no side inlet, accepts female threaded nozzles, with reclaimed water body cap 12" pop-up spray body with pressure regulator and check valve, no side inlet, accepts female threaded nozzles, with reclaimed water body cap 50 10.00 25 21.00 25 26.00 25/250 8.50 50 14.00 25 25.00 25 31.00 Note: Pro-Spray sprinklers are sold in carton quantities only. PRO-SPRAY PRS40 ACCESSORIES PROS-RC-CAP Snap-on reclaimed water identification cap, fits all 1 1.05 Pro-Spray bodies 213600SP Shut-off cap for Pro-Spray, thread-on 5 2.00 916400SP Shut-off nozzle for PS Ultra and Pro-Spray 10 2.00 458562 Pro-Spray PRS40 reclaimed water thread-on body cap with check valve ID 1 3.95 19
NOZZLES SPRAY NOZZLES PRECISION DISTRIBUTION CONTROL TM ADJUSTABLE NOZZLES*, FEMALE THREAD 4-A 4' radius, adjustable arc nozzle (0 360 ) 25/250 1.35 6-A 6' radius, adjustable arc nozzle (0 360 ) 25/250 1.35 8-A 8' radius, adjustable arc nozzle (0 360 ) 25/250 1.35 10-A 10' radius, adjustable arc nozzle (0 360 ) 25/250 1.35 12-A 12' radius, adjustable arc nozzle (0 360 ) 25/250 1.35 15-A 15' radius, adjustable arc nozzle (0 360 ) 25/250 1.35 17-A 17' radius, adjustable arc nozzle (0 360 ) 25/250 1.35 ADJUSTABLE ARC STREAM NOZZLES*, FEMALE THREAD S-8A 8' adjustable arc stream spray nozzle 25/250 1.35 S-16A 16' adjustable arc stream spray nozzle 25/250 1.35 Notes: *All nozzles are sold in bag/carton quantities only. All nozzles include filter screen. PRO-SPRAY FIXED ARC NOZZLES*, FEMALE THREAD 5Q, 5H, 5F 5' radius, fixed arc nozzle 25/250 1.35 8Q, 8T, 8H, 8F 8' radius, fixed arc nozzle 25/250 1.35 10Q, 10T, 10H, 10F 10' radius, fixed arc nozzle 25/250 1.35 12Q, 12T, 12H, 12TT, 12' radius, fixed arc nozzle 25/250 1.35 12TQ, 12F 15Q, 15T, 15H, 15TT, 15' radius, fixed arc nozzle 25/250 1.35 15TQ, 15F 17Q, 17H 17' radius, fixed arc nozzle 25/250 1.35 SHORT RADIUS FIXED ARC NOZZLES*, FEMALE THREAD 2Q, 2H 2' radius, fixed arc nozzle 25/250 1.35 4Q, 4H 4' radius, fixed arc nozzle 25/250 1.35 6Q, 6H 6' radius, fixed arc nozzle 25/250 1.35 SPECIALTY SPRAY PATTERN NOZZLES*, FEMALE THREAD CS-530 5' x 30' center strip nozzle 25/250 1.35 ES-515 5' x 15' end strip nozzle 25/250 1.35 LCS-515 5' x 15' corner strip nozzle, left 25/250 1.35 RCS-515 5' x 15' corner strip nozzle, right 25/250 1.35 SS-530 5' x 30' side strip nozzle 25/250 1.35 SS-918 9' x 18' side strip nozzle 25/250 1.35 Notes: *All nozzles are sold in bag/carton quantities only. All nozzles include filter screen. Learn more. Visit hunterindustries.com 20
NOZZLES FILTER SCREENS SPRAY NOZZLE FILTER SCREEN Model Description Carton Qty List Price $ 464716SP Replacement filter screen for spray nozzles, gray (fine mesh) 25 0.17 464717SP Replacement filter screen for spray nozzles, black (coarse mesh) 25 0.17 BUBBLERS AND BUBBLER NOZZLES MODEL PCN, PRESSURE-COMPENSATING BUBBLER NOZZLES FLOOD PATTERN, FEMALE THREADED PCN-25 Pressure-compensating bubbler nozzle, 0.25 GPM 25/250 2.70 PCN-50 Pressure-compensating bubbler nozzle, 0.50 GPM 25/250 2.70 PCN-10 Pressure-compensating bubbler nozzle, 1.0 GPM 25/250 2.70 PCN-20 Pressure-compensating bubbler nozzle, 2.0 GPM 25/250 2.70 Notes: Pressure-compensating bubbler nozzles are sold in bag/carton quantities only. All nozzles include filter screen. MODEL MSBN, MULTI-STREAM PRESSURE-COMPENSATING BUBBLER NOZZLES 12" RADIUS, SPIDER PATTERN, FEMALE THREADED MSBN-25Q Multi-stream bubbler nozzle, 0.25 GPM quarter 25/250 2.70 MSBN-50Q Multi-stream bubbler nozzle, 0.50 GPM quarter 25/250 2.70 MSBN-50H Multi-stream bubbler nozzle, 0.50 GPM half 25/250 2.70 MSBN-10H Multi-stream bubbler nozzle, 1.0 GPM half 25/250 2.70 MSBN-10F Multi-stream bubbler nozzle, 1.0 GPM full 25/250 2.70 MSBN-20F Multi-stream bubbler nozzle, 2.0 GPM full 25/250 2.70 Notes: Multi-stream bubbler nozzles are sold in bag/carton quantities only. All nozzles include filter screen. MODEL CST, DUAL-STREAM STRIP PATTERN BUBBLER NOZZLES, 5' RADIUS, FEMALE THREADED 5-CST-B 5' radius, center-stream bubbler nozzle, 0.50 GPM 25/250 2.00 Notes: Dual stream bubbler nozzles are sold in bag/carton quantities only. All nozzles include filter screen. MODEL PCB, PRESSURE-COMPENSATING BUBBLER, ½" THREAD FLOOD PATTERN PCB-25 Pressure-compensating bubbler ½" FIPT, 0.25 GPM 25/250 5.40 PCB-50 Pressure-compensating bubbler ½" FIPT, 0.50 GPM 25/250 5.40 PCB-10 Pressure-compensating bubbler ½" FIPT, 1.0 GPM 25/250 5.40 PCB-20 Pressure-compensating bubbler ½" FIPT, 2.0 GPM 25/250 5.40 Notes: Pressure-compensating bubbler nozzles are sold in bag/carton quantities only. All nozzles include filter screen. Also available in reclaimed purple option. Add -R to the model. 21
NOZZLES MODEL AFB, ADJUSTABLE FLOOD BUBBLER, ½" THREAD FLOOD PATTERN, ADJUSTMENT SCREW AFB Adjustable flood bubbler ½ thread, maximum flow 2.0 GPM, pressure-compensating 25/250 4.10 Notes: Adjustable flood bubblers are sold in bag/carton quantities only. All bubblers include filter screen. 1" PGV: PROFESSIONAL-GRADE VALVES VALVES PGV-100A 1" plastic angle valve, without flow control, female NPT 20 34.00 inlet and outlet PGV-100G 1" plastic globe valve, without flow control, female NPT 20 29.00 inlet and outlet PGV-100G-S 1" plastic globe valve, without flow control, slip inlet and outlet 20 29.00 PGV-100G-LS 1" plastic globe valve, without flow control, female NPT 20 33.00 inlet and outlet less solenoid PGV-100-MB 1" plastic globe valve, without flow control, male NPT inlet, 20 29.00 1" outlet poly insert barb PGV-100-MB125 1" plastic globe valve, without flow control, male NPT inlet, 20 29.00 1¼" outlet poly insert barb PGV-100-MM 1" plastic globe valve, without flow control, male NPT 20 29.00 inlet and outlet PGV-101A 1" plastic angle valve, with flow control, female NPT 20 36.00 inlet and outlet PGV-101G 1" plastic globe valve, with flow control, female NPT 20 32.00 inlet and outlet PGV-101G-S 1" plastic globe valve, with flow control, female NPT 20 32.00 inlet and outlet PGV-101G-LS 1" plastic globe valve, with flow control, female NPT 20 28.00 inlet and outlet less solenoid PGV-101-MB 1" plastic globe valve, with flow control, male NPT inlet, 20 32.00 1" outlet poly insert barb PGV-101-MB125 1" plastic globe valve, with flow control, male NPT inlet, 20 32.00 1¼" outlet poly insert barb PGV-101-MM 1" plastic globe valve, with flow control, male NPT inlet and outlet 20 32.00 269205 Reclaimed water ID handle for PGV-101 series 1 2.00 458200 DC latching solenoid for all Hunter valves 1 32.00 Notes: For PGV with factory-installed DC latching solenoid, specify -DC. There will be an additional charge to the list price of the valve, call for more details. Valves are sold in carton quantities only. Learn more. Visit hunterindustries.com 22
VALVES 1" PGV JAR-TOP: PROFESSIONAL-GRADE VALVES WITH JAR-TOP BONNET PGV-100JT-G 1" plastic globe valve, jar-top bonnet, without flow control, 20 28.00 female NPT inlet and outlet PGV-100JT-G-LS 1" plastic globe valve, jar-top bonnet, without flow control, 20 25.50 female NPT inlet and outlet less solenoid PGV-100JT-GS 1" plastic globe valve, jar-top bonnet, without flow control, 20 28.50 female slip inlet and outlet PGV-100JT-MB 1" plastic globe valve, jar-top bonnet, without flow control, 20 28.50 male NPT inlet, 1" outlet poly insert barb PGV-100JT-MB075 1" plastic globe valve, jar-top bonnet, without flow control, 20 28.50 male NPT inlet, ¾" outlet poly insert barb PGV-100JT-MB125 1" plastic globe valve, jar-top bonnet, without flow control, 20 28.50 male NPT inlet, 1¼" outlet poly insert barb PGV-100JT-MM 1" plastic globe valve, jar-top bonnet, without flow control, 20 28.50 male NPT inlet and outlet PGV-101JT-G 1" plastic globe valve, jar-top bonnet, with flow control, 20 30.00 female NPT inlet and outlet PGV-101JT-G-LS 1" plastic globe valve, jar-top bonnet, with flow control, 20 27.50 female NPT inlet and outlet less solenoid PGV-101JT-GS 1" plastic globe valve, jar-top bonnet, with flow control, 20 30.50 female slip inlet and outlet PGV-101-JT-MB 1" plastic globe valve, jar-top bonnet, with flow control, 20 30.50 male NPT inlet, 1" outlet poly insert barb PGV-101JT-MB075 1" plastic globe valve, jar-top bonnet, with flow control, 20 30.50 male NPT inlet, ¾" outlet poly insert barb PGV-101JT-MB125 1" plastic globe valve, jar-top bonnet, with flow control, 20 30.50 male NPT inlet, 1¼" outlet poly insert barb PGV-101JT-MM 1" plastic globe valve, jar-top bonnet, with flow control, 20 30.50 male NPT inlet and outlet 269205 Reclaimed water ID handle for PGV-101 series 1 2.00 458200 DC latching solenoid for all Hunter valves 1 32.00 Notes: For PGV jar-top with factory-installed DC latching solenoid, specify -DC. There will be an additional charge to the list price of the valve; call for more details. Valves are sold in carton quantities only. PGV-ASV: Electric valves with anti-siphon vacuum break. PGV-075-ASV ¾" plastic anti-siphon electric valve, with flow control, NPT inlets 10 29.00 PGV-075-ASV-S ¾" plastic anti-siphon electric valve, with flow control, slip inlets 10 29.00 PGV-075-ASV-LS ¾" plastic anti-siphon electric valve, with flow control, NPT inlets 10 26.00 less solenoid PGV-101-ASV 1" plastic anti-siphon electric valve, with flow control, NPT inlets 10 33.00 PGV-101-ASV-S 1" plastic anti-siphon electric valve, with flow control, slip inlets 10 33.00 PGV-101-ASV-LS 1" plastic anti-siphon electric valve, with flow control, NPT inlets 10 30.00 less solenoid 269205 Reclaimed water ID handle for PGV-101 series 1 2.00 458200 DC latching solenoid for all Hunter valves 1 32.00 Note: Valves are sold in carton quantities only. 23
VALVES PGV 1 ½" & 2" VALVES PGV-151 1 ½" plastic combination globe/angle valve, with flow control, 8 100.00 NPT inlets PGV-201 2" plastic combination globe/angle valve, with flow control, 8 142.00 NPT inlets 458200 DC latching solenoid for all Hunter valves 1 32.00 607105 Reclaimed water ID handle for PGV-151-201 series 1 2.00 Notes: For PGV with factory-installed DC latching solenoid, specify -DC. There will be an additional charge to the list price of the valve; call for more details. Valves are sold in carton quantities only. ICV: INSTITUTIONAL COMMERCIAL VALVES ICV-101G 1" glass-filled nylon, 220 PSI globe valve, with flow control 12 120.00 ICV-101G-FS 1" glass-filled nylon, 220 PSI globe valve, with flow control 12 180.00 and Filter Sentry option ICV-151G ½" glass-filled nylon, 220 PSI globe valve, with flow control 8 160.00 ICV-151G-FS 1 ½" glass-filled nylon, 220 PSI globe valve, with flow control 8 220.00 and Filter Sentry option ICV-201G 2" glass-filled nylon, 220 PSI globe valve, with flow control 8 217.00 ICV-201G-FS 2" glass-filled nylon, 220 PSI globe valve, with flow control 8 277.00 and Filter Sentry option 561205 Reclaimed water ID handle for ICV-101-201 series 1 2.00 ICV-301 3" glass-filled nylon, 220 PSI globe/angle valve, with flow control 1 450.00 ICV-301-FS 3" glass-filled nylon, 220 PSI globe/angle valve, with flow 1 550.00 control and Filter Sentry option 515005 Reclaimed water ID handle for ICV-301 series 1 2.00 458200 DC latching solenoid for all Hunter valves 1 32.00 Notes: For ICV with factory-installed DC latching solenoid, specify -DC. There will be an additional charge to the list price of the valve; call for more details. IBV: COMMERCIAL BRASS VALVES IBV-101G-FS 1" NPT brass globe valve, with flow control, 4 240.00 with factory-installed Filter Sentry diaphragm IBV-151G-FS 1 ½" NPT brass globe valve, with flow control, 2 425.00 with factory-installed Filter Sentry diaphragm IBV-201G-FS 2" NPT brass globe valve, with flow control, 2 430.00 with factory-installed Filter Sentry diaphragm IBV-301G-FS 3" NPT brass globe valve, with flow control, 1 1,120.00 with factory-installed Filter Sentry diaphragm 458200 DC latching solenoid for all Hunter valves 1 32.00 Note: Valves are sold in carton quantities only. Learn more. Visit hunterindustries.com 24