Where legislation does not explicitly restrict or limit the use of lead containing coatings it is the responsibility of the client to inform International Paint in writing of their specific requirements Technical Specification Scripps Institute of Oceanography California- San Francisco, U.S.A. Hark, J. E-Mail : jesspo.hark@akzonobel.com companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request 1
Main Schemes Interspec Area Description Area ft² Vertical Sides An Interspeed 640 high peformance TBT free polishing scheme for an in-service of 36 months. 16,700ft² Freeboard An Intershield 300V abrasion resistant epoxy anticorrosive and Interthane 990HS polyurethane finish. 14,000ft² Thinners companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request 2
Vertical Sides [16,700ft²] An Interspeed 640 high peformance TBT free polishing scheme for an in-service of 36 months. Surface Preparations Remove all weld splatter, smooth weld seams and sharp edges. Fresh water wash to remove all dirt and contamination. Degrease according to SSPC-SP1 solvent cleaning. Ensure area is clean and dry prior to application.close high pressure fresh water wash (3,000 psi/211 Kg cm²) using a fan jet lance holding the tip 150mm from and perpendicular to the surface overlapping each pass 30% removing all dirt, dust salt, partially hydrolised antifouling layer and other surface contamination.part/spot blast to Sa2 ISO 8501-1 or SSPC SP6.Ensure all surfaces are clean, dry and free of contamination prior to the application of each coat of the specified paint scheme. Product Colour Coats DFT Mils WFT Mils PSR (ft²/us Touch Dry Hard Dry Overcoating Intershield 300V Bronze 15% TU 5.0 7.9 143.74 3hrs 4hrs 2hrs GTA220 GTA415, Intershield 300V Aluminium 15% TU 5.0 7.9 143.74 3hrs 4hrs 2hrs GTA220 GTA415, Min Max Pot Life Thinner Cleaner Volume US Gal Interspeed 640 Black 20% TU 5.0 8.1 141.46 4hrs _ 6hrs ext _ GTA007 GTA007 23.7 Interspeed 640 Red FC 6.0 9.7 117.88 4hrs _ 6hrs ext _ GTA007 GTA007 141.5 _ 21.0 33.6 200.0 Scheme Notes: 2nd coat of Intershield 300V (Aluminum) shall be "thumbprint tacky" in order to apply 1st coat of Interspeed 640 (Black). Freeboard [14,000ft²] An Intershield 300V abrasion resistant epoxy anticorrosive and Interthane 990HS polyurethane finish. Surface Preparations Remove all weld splatter, smooth weld seams and sharp edges. Fresh water wash to remove all dirt and contamination. Degrease according to SSPC-SP1 solvent cleaning. Ensure area is clean and dry prior to application.close high pressure fresh water wash (3,000 psi/211 Kg cm²) using a fan jet lance holding the tip 150mm from and perpendicular to the surface overlapping each pass 30% removing all dirt, dust salt, partially hydrolised antifouling layer and other surface contamination.part/spot blast to Sa2 ISO 8501-1 or SSPC SP6.Ensure all surfaces are clean, dry and free of contamination prior to the application of each coat of the specified paint scheme. Product Colour Coats DFT Mils WFT Mils PSR (ft²/us Touch Dry Hard Dry Overcoating Intershield 300V Bronze 15% TU 5.0 7.9 143.74 3hrs 4hrs 6.5hrs 5.5mths 2hrs GTA220 GTA415, Intershield 300V Aluminium 15% TU 5.0 7.9 143.74 3hrs 4hrs 6.5hrs 3days 2hrs GTA220 GTA415, Min Max Pot Life Thinner Cleaner Volume US Gal Interthane 990HS Base Ultra Deep FC 3.0 4.4 258.57 2hrs 6hrs 6hrs ext 3hrs GTA056 GTA056 54.1 _ 13.0 20.2 83.3 Scheme Notes: Interthane 990HS use 99072143/A5GL Dark Blue 17.4 17.4 14.6 14.6 companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request 3
Thinners Product Colour Sales Code Volume US Gal International _ GTA220 20.0 International _ GTA007 20.0 _ 40.0 companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request 4
Product List Product Colour Sales Code Volume Solids (%) Volume (US Gal ) Intershield 300V Bronze ENA310/A 63 32.0 Intershield 300V Aluminium ENA311/A 63 32.0 Interspeed 640 Red BRA640 62 141.5 Interspeed 640 Black BRA642 62 23.7 Interthane 990HS Base Ultra Deep 99044/A 68 54.1 Product List - Thinners Product Colour Sales Code Volume Solids (%) Volume (US Gal ) International _ GTA007 0 20.0 International _ GTA220 0 20.0 companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request 5
Application Notes companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request 6
Terms and Conditions This confidential document is for the use of the above named client and its contents should not be reproduced or transmitted without prior written permission from International Paint. The information is given in good faith and attention to the following statement : The information given in this report is not intended to be exhaustive and any person using any products for any purpose other than that specifically recommended in this report without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk. Any warranty, if given, or specific Terms & Conditions of Sale are contained in International Paints Terms and Conditions of Sale, a copy of which can be obtained on request. Whilst we endeavour to ensure that all advice we give about the product (whether in this report or otherwise) is correct we have no control over either the quality or condition of the substrate or the many factors affecting the use and application of this product. Therefore, unless we specifically agree in writing to do so, we do not accept any liability whatsoever for howsoever arising for the performance of our products or for any loss or damage (other than death or personal injury resulting from our negligence) arising out of the use of the product. The information contained in this report is liable to modification from time to time in the light of experience and our policy of continuous product development. It is the user's responsibility to check that upto date product data sheets are obtained prior to using the products and that local environmental controls that may be in force are observed when using any of our products. Health & Safety Products referred to in this report are intended for use only by professional applicators in industrial situations in accordance with the advice given on our Technical Datasheetst, the Material Safety Data Sheet and the container(s), and should not be used without reference to the Material Safety Data Sheet (MSDS). All work involving the application and use of this product should be performed in compliance with all relevant national Health, Safety & Environment standards and regulations. In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation. If in doubt regarding the suitability of use of this product, consult International Paint for further advice. companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request 7