Introduction Harmony 00K/SK/KX 0 mm push buttons Introduction Schneider Electric s Harmony 00 0 mm push buttons, pilot lights, selector switches and mushroom head operators provide robust and reliable solutions for a wide range of heavy industry applications. b 00K operators are rugged and include chrome-plated bezels. (See page.) b 00SK operators include black plastic bezels for corrosion-resistant applications. (See page.) b 00KX operators include chrome-plated square bezels and provide multi-function operation. (See page.) Product features: b Heavy duty, oil-tight, dust-tight, and water-tight without boots. Most units are IP rated and are UL types, X and. b FINGERSAFE contact blocks and light modules for improved safety b Interchangeable light modules, contact blocks, color caps, pilot light lenses and mushroom heads reduce inventory b Integrated earth ground connection (no ground wires required) b Easy installation with octagonal ring nut b Metal or plastic legend plates Contact block features: b Clear window for status of contact operation and troubleshooting b Color coded for easy identification b Single screw mounting for quick installation b Side-by-side and/or stacked mounting to minimize enclosure space requirements Light module features: b Low-cost incandescent lamps or energy-efficient, long-life LED lamps b Wide range of voltages from V to 00V products are: b UL listed and CSA certified b CE declaration of conformity b RoHS compliant 0
Specifications Harmony 00K/SK/KX 0 mm push buttons 00SK Environmental specifications Conforming to standards Marked Product certifications E0 LR0 CCN NKCR Class -0 Protective treatment standard version Ambient air temperature around the device EN/IEC 0-, EN/IEC 0--, EN/IEC 0--, JIS C 0 and, UL 0, CSA C- n, e marked, RoHS compliant UL E0, CCN NKCR and CSA LR0, Class -0 TC Storage F ( C) -0 to + (-0 to +0) Operation F ( C) - to + (- to +0) Vibration resistance Conforming to IEC 00-- Frequency: to 00 Hz: gn Ford Standard EA- Shock resistance Conforming to IEC 00-- Half sine wave: 0 gn Electric shock protection Conforming to IEC 0 Class II Degree of protection Conforming to EN/IEC 0 IP Conforming to NEMA Types,,, R,, and Mechanical life (in millions of operating cycles) Mounting position Push buttons, spring return Illuminated push buttons Selector switches and key switches 0. positions Electrical characteristics of contact blocks Rated operational characteristics a AC- c DC- A, 0 V 0. A, V Rated insulation voltage Conforming to EN/IEC 0- V Ui = 0 degree of pollution (except pilot lights with incandescent bulb: degree of pollution ) Rated impulse withstand Conforming to EN/IEC 0- kv Uimp =. voltage Contact material Normal environment and usage Silver alloy Contact operation N/C ou N/O Slow break Positive operation Conforming to EN/IEC 0-- N N/C contact(s) with positive opening operation Short-circuit protection Conforming to EN/IEC 0-- A Cartridge fuse mounted upstream: 0 Cabling capacity Conforming to EN/IEC 0- (00KA contact blocks and 00KM light modules) mm mm Thermal current lth A 0 Screw clamp terminals (cross headedslotted screw) Mini: x 0. Maxi: x. Recommended tightening torque: 0. N.m (0 in-lbs) Maximum operation current a.c. supply: utilization category AC- NEMA A00 d.c.supply: utilization category DC- NEMA Q00 V A VA V A VA V A Contact making capacity 0 0 00 Breaking capacity 0 0 0 0 00 0 0 0 00 0. 0 Contact making capacity and breaking capacity 0. 0 0. 00 0. 00 00 00. 0 0 page s: page page 0 page
Specifications (continued) Harmony 00K/SK/KX 0 mm push buttons 00SK Basic Operators (For Color Caps, Mushroom Buttons, Knobs, Se lector Switch Cams, Contact Blocks, Light Modules and Legend Plates, see page.) Description UL Types/NEMA Types, X, Non Illuminated Push Button (Full Guard) 00SKR Non Illuminated Push Button (Extended Guard) 00SKR Non Illuminated Push Button (No Guard) 00SKR Non Illuminated Push Button (Mushroom Button/screw on) 00SKR0 Non Illuminated Dual Push Button (Momentary) Non Illuminated Dual Push Button (Momentary Interlocked) Non Illuminated Dual Push Button (Maintained Interlocked) Momentary Pull - Maintained Neutral - Momentary Push 00SKR () Maintained Pull - Maintained Push 00SKR () Illuminated Push Button (Full Guard - Plastic Top) 00SKL () Illuminated Push Button and Push-to-test (No Guard) 00SKL () () Illuminated Push Button (Full Guard - Metal Top) Standard Pilot Light 00SKP -Position Selector Switch 00SKS (), 00SKS (), 00SKS () -Position Selector Switch 00SKS (), 00SKS (), 00SKS (), 00SKS () -Position Selector Switch 00SKS () Trigger-Action Emergency Stop 00SKR () () Operator can be converted to an illuminated operator by removing the liner (000) and adding a light module. () Operator can be converted to a non-illuminated operator by adding liner (000). () Operator includes jumper wires for push-to-test conversion. Non Hazardous Locations: CCN E NKCR Class LR0 0 Marking Hazardous Locations (Reed contact blocks, see page ): CCN E00 NOIV Class LR 0 Marking 0 page s: page page 0 page
Specifications (continued) Harmony 00K/SK/KX 0 mm push buttons 00SK 00SK Operator Materials: Push Button and Push-to-test Pilot Light (00SKR and 00SKT) Base Thermoplastic Polyester Stem Acetal (non-illuminated push button) Thermoplastic Polyester (illuminated push button and push-to-test pilot light) Seal Nitrile Gasket Nitrile Spring 0 Stainless Steel Spring Support CRS Lock Ring Nylon Trim Washer Polypropylene Locking Thrust Washer Thermoplastic Polyester Ring Nut Thermoplastic Polyester Color Insert Polyethylene (non-illuminated push button) Color Cap Polycarbonate (illuminated push button and push-to-test pilot light) Mushroom Button Acetal (non-illuminated push button) Polycarbonate (illuminated push button) Liner Polypropylene (non-illuminated push button) Selector Switch (00SKS) Base Thermoplastic Polyester Seal Nitrile Gasket Nitrile Seal Keeper 0 Stainless Steel Spring 0 Stainless Steel Cam Follower Delrin 00 Bearing Washer Polyester Film Cam Carrier Trogamid Cam Profile Delrin 00 Liner Polypropylene (non-illuminated only) Knob Polycarbonate Trim Washer Polypropylene Locking Thrust Washer Thermoplastic Polyester Spring Support CRS Pilot Light (00SKP) Gasket Nitrile Base Thermoplastic Polyester Trim Washer Polypropylene Locking Thrust Washer Thermoplastic Polyester Ring Nut Thermoplastic Polyester Color Cap Polycarbonate Contact Block And Light Module Materials: Contact Block (00KA) Housing Amorphous Nylon Contact Slider Phenolic, Nylon or Acetal Terminal Steel Saddle Clamp Steel Spring Stainless Steel Contacts Silver and Copper Blade Beryllium Copper Mounting Screw Steel Label Paper Light Module (00KM) Housing Thermoplastic Polyester Socket Steel Terminal Steel with Tin Plate Saddle Clamp Steel Translating Pin Polycarbonate Thermoplastic Polyester, Steel, Copper, Polyvinyl Chloride, Polytetrafluorethylene, Acetate, Paper Lamp Spring Tin Plated Music Wire 0 page s: page page 0 page 0
s (continued) Harmony 00K/SK/KX 0 mm push buttons 00SK Multi-function operators Note: When ordering, add prefix 00 to the reference. 0 mm Multi-function Operators UL Types, X, /NEMA, X, Non-Illuminated Push-pull Screw-on Mushroom Operators -Position () 00SKRR Maintained Pull- Non-Illuminated -/ in Diameter Knob Maintained Push () Includes 00KNWP Legend Plate Marked Pull To Start / Push To Stop Description Color With N.C. Contacts ( KA, KA) -Position Momentary Pull- Maintained Neutral- Momentary Push () () () To obtain a red knob with Push Emergency Stop printed on the red knob substitute R0 in place of R. () Replace b with the color code as chosen from the color code at right. Example: SKRb with a yellow knob = SKRY () Replace c with the voltage assembly code as chosen from the tables on page. Example: SKRPc with V 0 0 Hz = SKRP () The knob must be the same color as the LED light module chosen; e.g., for green LED, use green knob. () On neon light modules, use clear knobs only. () These operators can be ordered complete with contact blocks. For maximum block usage, see page. Add the H number chosen from page to the end of the operator reference number and add the cost of the H number to the operator cost. () For positions, refer to the two tables below. With N.O. / N.C. Contact ( KA) Without Contacts () Red SKRRH SKRR Green SKRGH SKRG Other SKRbH SKRb Red SKRRH SKRR Green SKRGH SKRG Other SKRbH SKRb Positions for 00SKRRH or H Positions for 00SKRH PULL CTR PUSH PULL CTR PUSH KA x O O (KA) KA x O O KA x x O KA O O x KA O O x O = contact open; x = contact closed Non-Illuminated Turn-to-release Mushroom Operators Description Color With N.O. Contact (KA) -Position Trigger-Action, Turn-to-Release -/ in. (0 mm) Non-Removal Plastic Mushroom Complies with EN/ISO0 standards for Emergency Stop push buttons when used with 00SKRH circular Legend Plate 00KN0 (0 mm diameter) or 00KN0 (0 mm diameter). See page. Illuminated Push-pull Mushroom Operators Description With Red Knob and N.C. Contacts ( KA, KA) -Position Momentary Pull- Maintained Neutral- Other, Momentary Push LED, Flashing () () () () Other, Resistor, Neon () 00SKRP -/ in Diameter Knob with Pull To Start / Push To Stop 00KN Legend Plate For -/ in or -/ in Diameter Knob () With Other Color With Other Knob and N.C. Color Contacts Knob Without Contacts () 0 0 V, 0 0 Hz SKRPRH SKRPbH SKRPb SKRPcRH SKRPcbH SKRPcb Description With Red a Knob and N.O. & N.C. Contact (KA) -Position Maintained Pull- Maintained Push () () () To select and order Contact Blocks, Light Modules, Knobs, and Accessories, see pages 0 to. With N.O. / N.C. Contacts ( KA) SKRPcRH SKRPcbH SKRPcb With Other Color Knob and N.O. & N.C. Contact (KA) Without Contacts Red SKRH SKRH SKR With Other Color Knob Without Contacts 0 0 V, 0 0 Hz SKRPRH SKRPbH SKRPb Other, SKRPcRH SKRPcbH SKRPcb L.E.D., Flashing () Other, SKRPcRH SKRPcbH SKRPcb Resistor, Neon () Color Codes Color SKR, SKR SKR, SKR Black () B B Red R R Green G G Blue L L Yellow Y Y White W W Orange () S S Clear C Amber A Gray E () These colors are not available on illuminated push-pull operators. 0 page Specifications: page page 0 page
s (continued) Harmony 00K/SK/KX 0 mm push buttons 00SK Contact blocks Note: When ordering, add prefix 00 to the reference. Contact Block H Codes The design of the 00KA contact blocks allows them to be mounted side by side and/or in tandem. This enables you to specify an operator and a particular arrangement of contact blocks (shipped completely assembled) with a single reference number. See page 0 for a description of contact blocks. Side Example: A 00KRB push button with 00KA contact blocks would be 00KRBH. Dimensions When Using Contact Blocks Panel Thickness.0 min.. () () POS POS POS POS POS POS Locating Notch max. Side Panel Thickness / min.-/ max. Suffix No. (Add to Operator ) Positions H KA H KA KA H KA KA KA H KA KA KA KA H KA H KA H KA KA H KA KA H KA KA H0 KA KA H KA KA KA H KA KA KA KA H KA H KA H KA KA KA H KA KA KA H KA KA KA H KA KA KA KA H KA KA KA KA KA H KA KA H KA KA KA KA KA KA H KA KA H KA KA Note: For H Codes not shown in this table, contact your local Schneider Electric representative..0 ().0 () 0. (). (). () Standard Blocks. () 0. (). () Reed Blocks Maximum Contact Block Usage: blocks mounted side by side only: Any, or -Position spring return selector switch (non-illuminated, illuminated or keyed). blocks mounted in tandem on one side only: Any operator interlocked push button. blocks mounted in tandem (total of four blocks): Any selector push button, keyed push button,,, or -Position maintained selector switch (non-illuminated, illuminated or keyed), push pull operators (non-illuminated or illuminated), joy stick, dual push button. blocks mounted in tandem (total of six blocks): Single mo mentary push buttons (non-illuminated or illuminated). 0 page Specifications: page page 0 page
s (continued) Harmony 00K/SK/KX 0 mm push buttons 00SK Light modules Note: When ordering, add prefix 00 to the reference. 0 Standard Light Modules for 00SK Control Units () Description Light Module Assembly Code Rating Replacement Lamp KM0 0 no lamp included (without Bayonet Base Lamp) Vac/Vdc KM. VA 0000 Vac/Vdc KMLR LR 000 Vac/Vdc KMLG LG 000 Vac/Vdc KMLY LY 000 Vac/Vdc KM. VA 000 Vac/Vdc KMLR LR 000 Vac/Vdc KMLG LG 000 Vac/Vdc KMLY LY 000 Vac/Vdc Resistor KM. VA 000 Vac/Vdc KM. VA 0000 Vac/Vdc KMLR LR. VA 000 Vac/Vdc KMLG LG. VA 00 Vac/Vdc KMLY LY. VA 00 Vac/Vdc LED White KMLW LW. VA 00 Vac/Vdc LED Blue KMLL LL. VA 00 Vac/Vdc KM. VA 000 0 0 V, 0 0 Hz KMLR LR 000 0 0 V, 0 0 Hz KMLG LG 000 0 0 V, 0 0 Hz KMLY LY 000 0 0 V, 0 0 Hz KM. VA 0000 0 0 V, 0 0 Hz Flashing KMF F. VA 000 0 Vac/Vdc Resistor KM.0 VA 000 0 Vac/Vdc KM.0 VA 000 0 Vac/Vdc Neon KM 0. VA 000 0 Vac/Vdc KMLR LR. VA 000 0 Vac/Vdc KMLG LG. VA 00 0 Vac/Vdc KMLY LY. VA 00 0 Vac/Vdc LED White KMLW LW. VA 00 0 Vac/Vdc LED Blue KMLL LL. VA 00 0 0 V, 0 0 Hz KM. VA 0000 0 0 V, 0 0 Hz KMLR LR 000 0 0 V, 0 0 Hz KMLG LG 000 0 0 V, 0 0 Hz KMLY LY 000 0 0 V, 0 0 Hz LED White KMLW LW 00 0 0 V, 0 0 Hz LED Blue KMLL LL 00 0 0 V, 0 0 Hz KM.0 VA 0000 0 0 V, 0 0 Hz KMLR LR 000 0 0 V, 0 0 Hz KMLG LG 000 0 0 V, 0 0 Hz KMLY LY 000 0 0 V, 0 0 Hz LED White KMLW LW 00 0 0 V, 0 0 Hz LED Blue KMLL LL 00 0 Vac/Vdc Resistor KM.0 VA 000 0 Vac/Vdc Neon KM 0. VA 000 V, 0 0 Hz KM. VA 0000 0 0 V, 0 0 Hz KM. VA 0000 0 Vac/Vdc Neon KM 0. VA 000 0 00 V, 0 0 Hz KM. VA 0000 () For use with all operators except KX and remote test pilot. Notes: Light modules are available in other voltages, as shown above. For use in hazardous locations, see page. With neon type light modules, use a clear color cap only. With LED light modules, use either a clear color cap or a cap the same color as the LED. Shallow Depth Light Modules For 00SK Control Units () Description Light Module Assembly Code Rating Replacement Lamp Vac/Vdc KM. VA 0000 KMLR LR 0. VA 000 KMLG LG 000 KMLY LY 000 0 0 Vac/Vdc KM.0 VA 000 KMLR LR 0. VA 000 KMLG LG 000 KMLY LY 000 () For use with all operators except KX and remote test pilot. Notes: For use in hazardous locations, see page. Reduces the depth of illuminated push buttons with contact blocks by over %. With LED light modules, use a cap that is the same color as the LED. CCN E NKCR Class LR0 0 marked page Specifications: page page 0 page
s (continued) Harmony 00K/SK/KX 0 mm push buttons 00SK Replacement parts Ring Nuts Used On SKL 00SK SK0, SK, SK, SK 00SK SK0, SK, SK, SK () 00SK SKL 00SK SKP, SKTR 00SK SKR 00SK SKR 00SK SKR () 00SK SKR () 00SK SKR 00SK SKR 00SK SKR 00SK0 SKR 00SK SKR 00SK SKR 000 SKR 00SK SKS 00SK SKS () SKRU SKRU,,,,,0 SKT 00SK 00SK 00SK0 00SK () Maintained button of two button operator. () Momentary button of two button operator. () Secondary ring nut (holds knob on selector switch or potentiometer). Replacement Lamps For Series A F (black) Light Modules Light Lamp Number Module (ANSI) Schneider Electric Replacement Lamp KM GE () KM GE0 0000 KM GE () KM GE0 0000 KM GE () KM GE () KM GE () KM GE () KM GE 0000 KM CMDKA 000 KM CMDKA 000 KM CMDKA 000 KM CMDKA 000 KM CMDKA 000 KM SYLPSB 0000 KM SYLPSB 0000 KM SYLPSB 0000 KM SYL0PSB 0000 KM SYLPSB 0000 KM SYLPSB 0000 KM SYLPSB 0000 KM SYLPSB 0000 KM SYLPSB 0000 KM SYL0PSB 0000 KM SYL0PSB 0000 () GE and GE are interchangeable (GE gives longer life). If a GE lamp is ordered, a GE (0000) will be substituted. For a replacement lamp in a current series light module see the light module listing on page. page Specifications: page page 0 Repair Parts Description E0 Key Gray cap for 00SKR, or 00SKR Clear plastic top (only) for 00SK Ring Nut Gasket for 00K and 00SK Push-pull Knob Gasket for Plastic Illuminated Lens Gasket for 00SK selector switch knob Black Compensating Gasket Liner for Non-Illuminated Operators Locking Thrust Washer Nylon Spacer Locking Thrust Washer (Std. 00SK Operator) Push-pull Mushroom Adapter () Rubber Boot for Joystick Knob on Joysticks without latch Knob for SK Potentiometer Fingersafe Cover for 00KM 000 000 DXI 000 000 000 0000 000 0 0000 00 00K 0 D0X 000 000 () ows Type -0 and - mushroom color caps to be used on push-pull operators. Use of 00K voids Type rating. KU Replacement Ring Nuts (Threaded Inside and Out) Used On KU through KU, KU, KU, KU 000 KU, KU 000 Interlock Screwdriver 00K Wrenches K Where Used For mechanically interlocking two push buttons so that only one button can be depressed at a time. A K attachment is furnished with the 00SKR,SKR, SKRU and SKRU operators. However, these are maintained operators and the K interlock serves to release one of the buttons when the other is depressed. When used with momentary contact buttons, the K interlock does not hold the buttons in the depressed position. It simply prevents pushing both buttons at the same time. The K interlock is mounted behind the operators. Operators not included. 00K Used to tighten mounting screws on contact blocks and light modules. K For tightening ring nuts on and 0 mm control units 00K For protective cap kits 00K page 0
Push Buttons and Operator Interface - Type K and SK, 0 mm Light Modules Type K, SK, KX, and T Standard Light Modules for Types K, SK,. and KX Control Units ➃ For use in hazardous locations See page 0. Neon type light modules use CLEAR color caps only. LED light modules require the color cap color and the LED color be the same or use a clear color cap. Standard Duty Shallow Depth Dual Dimensions. in 0. mm. in. mm inches mm Vac-dc Vac-dc Vac-dc Vac-dc - Vac-dc - Vac-dc - Vac-dc - Vac-dc Description For Use With Single Lamp Ill. Operators as Indicated ➀ Light Module Type No. ➄ KM KMLR KMLG KMLY KM KMLR KMLG KMLY Assembly Code LR LG LY LR LG LY Rating 0. VA 0. VA 0. VA 0. VA. VA Replacement Lamps ➂ ➃ Lamp Number (ANSI) Lamp Part Number ➄ 0000 000 000 000 000 000 000 000 Vac-dc Resistor KM. VA 000 - Vac-dc - Vac-dc - Vac-dc - Vac-dc KM KMLR KMLG KMLY LR LG LY. VA 0000 000 000 000 Vac-dc Resistor KM. VA 0000 Vac-dc Vac-dc Vac-dc Vac-dc 0 Vac-dc 0 Vac-dc 0 Vac-dc 0 Vac-dc 0-0 V, -0 Hz 0-0 V, 0-0 Hz 0-0 V, 0-0 Hz 0 Vac-dc 0 Vac-dc 0 Vac-dc 0 Vac-dc 0 Vac-dc 0 Vac-dc Flashing Resistor Neon KM KMLR KMLG KMLY KM KMLR KMLG KMLY KM KM KMF KM KM KM KMLR KMLG KMLY LR LG LY LR LG LY F LR LG LY. VA.0 VA. VA. VA 0. VA.0 VA.0 VA 0. VA.0 VA.0 VA.0 VA MB 000 000 000 000 0MB 000 000 000 000 0 0MB 0MB NEH 0000 0000 000 000 000 000 000 000 000 0-0 V, 0-0 Hz KM. VA 0000 0-0 V, -0 Hz 0-0 V, 0-0 Hz 0-0 V, 0-0 Hz 0 Vac-dc 0 Vac-dc Flashing Resistor Neon and KX KM KM KMF KM KM F. VA.0 VA.0 VA.0 VA 0. VA 0 0MB NEH 0000 0000 000 000 000 V, 0-0 Hz KM. VA 0000 0 Vac-dc Neon and KX KM 0. VA NEH 000 0-0 V, 0-0 Hz 0 Vac-dc 0 Vac-dc 0-00 V, 0-0 Hz Neon Neon and KX and KX Replacement lamps for Series G 0Vac LED Light Modules ➂ Description Lamp Part Number 0 Vac Only 000 0 Vac Only 000 0 Vac Only 000 KM KM KM KM. VA 0. VA 0. VA. VA NEH NEH 0000 000 000 0000..0 Side View....0 Side View Shown with 00 KA contact block Shallow Depth Light Modules For Types K and SK Control Units For use in hazardous locations See page 0. Reduces the depth of illuminated push buttons with contact blocks by over %. LED light modules require the color cap color and the LED color be the same or use a clear color cap. - Vac-dc - Vac-dc - Vac-dc - Vac-dc 0-0 Vac-dc 0-0 Vac-dc 0-0 Vac-dc 0-0 Vac-dc Description For Use With Single Lamp Ill. Operators as Indicated ➅ and KX and KX and KX and KX and KX and KX and KX and KX ➀ 00 K, SK, KX. ➁ Do not use on any remote test version pilot light. ➂ LED lamps shown here will also function in Class 00 Type J pilot lights. ➃ For Series A through F light modules see page. ➄ light modules with a LED above V use a V Bipolar LED. ➅ 00K, SK, T Light Module Type No. ➄ KM KMLR KMLG KMLY KM KMLR KMLG KMLY Assembly Code LR LG LY LR LG LY Rating. VA 0. VA 0. VA 0. VA.0 VA 0. VA 0. VA 0. VA Replacement Lamps ➂ ➃ Lamp Number Lamp Part (ANSI) Number ➄ 0000 000 000 000 0MB 000 000 000 000-00 Schneider Electric Rights Reserved 0/00
Push Buttons and Operator Interface - Type K and SK, 0 mm "H" Numbers The design of the Class 00 Type KA contact blocks allows them to be mounted side by side and/or in tandem. The system illustrated below has been set up to enable an operator and a particular arrangement of contact blocks to be specified by a single type number. Operators and contact blocks will be shipped completely assembled. EXAMPLE: A Type KRB push button with Type KA contact blocks would be Class 00 Type KRBH. For Types K and SK Top View Suffix No. Positions (Add to Operator Type No.) H KA H KA KA H KA KA KA H KA KA KA KA H KA H KA H KA KA H KA KA H KA KA H0 KA KA H KA KA KA H KA KA KA KA H KA H KA H KA KA KA H KA KA KA H KA KA KA H KA KA KA KA H KA KA KA KA KA H KA KA H KA KA KA KA KA KA H KA KA H KA KA H KA KA KA H KA KA KA H KA KA H KA KA KA KA KA KA H KA KA KA H KA KA H KA KA KA H KA KA H KA H KA KA H KA KA KA KA H KA KA KA H0 KA KA KA H KA KA KA H KA KA KA KA H KA KA KA H KA KA KA H KA KA KA KA H KA KA KA H KA KA KA KA KA KA H KA KA KA KA H0 KA KA KA KA H KA KA KA H KA KA KA H KA KA H KA KA KA H KA KA KA KA H KA KA KA KA H KA KA H KA H KA KA KA H0 KA KA KA KA H KA KA KA KA H KA KA KA H KA KA H KA KA KA H KA KA KA KA H KA KA KA KA H KA KA H KA KA KA H KA KA KA KA H KA KA KA KA KA H KA KA KA KA KA H KA KA Suffix No. Positions (Add to Operator Type No.) H KA KA KA H KA KA KA H0 KA KA KA KA H KA KA KA KA H KA KA KA KA H KA KA H KA KA KA H KA KA KA KA KA H KA KA H0 KA KA KA KA KA H KA KA KA KA H KA KA KA KA KA H KA KA KA KA KA KA H KA KA KA KA KA KA H KA KA H KA KA KA H KA KA KA KA KA H KA KA KA KA KA H00 KA KA KA KA H0 KA KA KA KA KA KA H0 KA KA KA H0 KA KA KA KA H0 KA KA KA KA KA KA H0 KA H0 KA KA H0 KA KA KA H0 KA KA KA H0 KA KA KA KA KA KA H KA KA KA KA H KA KA H KA KA KA H KA H KA KA KA KA H KA KA KA KA H KA KA KA KA KA H KA KA H KA KA KA KA H0 KA KA KA H KA KA KA KA H KA KA KA H KA KA H KA KA KA H KA H KA H KA H KA KA H0 KA KA KA H KA KA KA H KA KA KA KA H KA KA H KA KA KA KA H KA KA KA KA H KA KA H KA KA KA KA H KA KA KA H KA KA H0 KA H KA KA H KA KA KA H KA KA KA H K KA H KA H KA KA H KA H KA KA H KA H0 KA H KA KA H KA KA KA H KA KA KA H KA KA H KA KA KA H KA KA KA KA KA KA H KA KA KA H KA KA KA KA H KA KA KA KA H KA H KA KA H K KA H K K KA KA H KA H KA KA H KA H KA H0 KA KA KA H KA KA H KA KA H KA KA H KA KA KA KA H KA KA KA KA H KA H KA KA H K KA H KA KA H Numbers not shown in their sequence are no longer used. 0/00-00 Schneider Electric Rights Reserved